Beli Battenfeld bekas (126)

Kondisi: bekas, Tahun pembuatan: 1994, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 8084/11/30, Gergaji untuk ekstrusi profil Hsdpfx Aexghrxedqsfn

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Single-screw extruder Battenfeld BEX 1-75-30:B with co-extruder BEX 1-35-30:B Application: PE, PP Year of construction: 2006 Screw diameter: 75 mm Drive: Baumüller 171 kW Speed: 2,450 rpm Combined output: approx. 850 kg/h In 2014, the extruder was retrofitted by Battenfeld with a frequency inverter, new three-phase motor (brushless), and frequency converter. Gearbox was overhauled in July 2024. Hfjdpoug Edkefx Adqon Condition: The extruder is in very good condition. Last use: PE pipes Battenfeld Co-Extruder BEX 1-35-30:D Application: PE pipes Connected load: 69 kVA Output: approx. 110 kg/h Year of construction: 2010 Condition: The extruder is in very good condition. Ownership: The extruder is my property. Location: D-26345 Bockhorn-Grabstede, Bahnhofstr 6, Germany

Tahun pembuatan: 2007, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1785-6201, Pengekstrusi sekrup tunggal Hjdpfx Adju Itqdeqsfn

Kondisi: baik (bekas), Tahun pembuatan: 2007, 18588 Hfsdexdk Auspfx Adqjn

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 90.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 90063, gaya penjepit: 800 kN, diameter sekrup: 75 mm, jarak antara tiang: 1.120 mm, volume langkah: 3.756 cm³, berat injeksi: 3.400 g, tinggi cetakan (min.): 500 mm, langkah pembukaan: 1.250 mm, tinggi pelat: 153 mm, panjang total: 11.100 mm, lebar total: 3.200 mm, tinggi total: 2.580 mm, berat keseluruhan: 63.000 kg, tegangan masuk: 400 V, arus masuk: 308 A, Perlengkapan: dokumentasi / manual, 2-K, nosel ganda, mesin tanpa penanganan Hfodpfsw U A Ufox Adqen

Kondisi: baik (bekas), Control card, MC3 control unit, plug-in boards, printed circuit boards, valve module, valve amplifier, printed wiring board, valve amplifier, valve control Hsdpjqku Nusfx Adqefn -Manufacturer: Bachmann, valve control removed from Battenfeld injection moulding machine -Type: PVV100 B 2537/00 -Quantity: 1x control card available -Price: per piece -Dimensions: 130/50/H30 mm -Weight: 0.3 kg/unit.

Kondisi: bekas, Tahun pembuatan: 1994, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 8084/77/10, Unit Haul-off 350 mm Hodpfx Adjxghq Isqsfn

Tahun pembuatan: 1998, Kondisi: siap digunakan (bekas), Two injection molding machines are available. 1) Battenfeld BA 2700/1200 BK, year of manufacture: 1998, clamping force: 2700kN, platen dimensions X/Y: 900mm/1020mm, tie bar spacing X/Y: 630mm/630mm, opening stroke: 550mm, mold height min./max.: 250mm/620mm, max. daylight: 1170mm, ejector stroke: 160mm. Screw diameter: 55mm, L/D ratio: 22, injection pressure: 1305bar, shot volume: 913cm³, shot weight: 830g. Machine dimensions X/Y/Z: approx. 6800mm/1900mm/3400mm, weight: approx. 12,000kg, control system: Unilog 4000, operating hours: approx. 40,759h. The machine exhibits faults when switching modes. Hedpfx Adsv Sufaoqsfn 2) Engel ES 200/45 HLS, year of manufacture: 1998, clamping force: 45t, platen dimensions X/Y: 550mm/430mm, min. mold height: 180mm, daylight: 530mm, opening stroke: 350mm, ejector stroke: 100mm. Screw diameter: 25mm, shot volume: 99cm³, injection pressure: 1400bar, L/D ratio: 20, screw stroke: 140mm. Machine dimensions X/Y/Z: approx. 3300mm/1200mm/1800mm, weight: approx. 3,300kg, operating hours: 74,165h. The machine shows minor hydraulic leaks. Documentation available. Inspection on site possible. Machines can be sold individually.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, jam operasional: 87.861 h, gaya penjepit: 1.000 kN, diameter sekrup: 30 mm, jarak antara tiang: 470 mm, volume langkah: 123 cm³, tekanan injeksi: 2.835 batang, berat injeksi: 112 g, tinggi cetakan (min.): 250 mm, Battenfeld HM 1000/350 Injection Moulding Machine (237) Item number: 237 Availability: in stock Year of manufacture: 2003 Manufacturer: Battenfeld Condition of the injection moulding machine: used Screw diameter [mm]: 30 Shot weight [g]: 112 Injection pressure [bar]: 2835 Tie bar spacing [mm]: 470 x 420 Platen size [mm]: 680 x 663 Min. mould height [mm]: 250 Hjdpswyukqefx Adqjfn Control type: Unilog B4 Language: German Installed power [kW]: 28.9 Operating hours [h]: 87,861 Weight [kg]: 4,500 Dimensions [mm]: 4,300 x 1,000 Feed hopper: NO Robot interface: Yes Core pull: 1x Air valve: 2x

Tahun pembuatan: 1990, Kondisi: baik (bekas), This haul-off machine, manufactured by Battenfeld Extrusionstechnik GmbH, is currently located at the machinery storage facility of Plastima Used Machinery. The equipment, a Haul-Off R630/6V model, dates from the year 1990. Brand: Battenfeld Extrusionstechnik GmbH Hfjdpfxsrrv Uwe Adqsn Model: Haul-Off R630/6V Year of construction: 1990 Voltage: 380 V Power: 4.5 kW Maximum pipe diameter: 110 mm to 630 mm

Tahun pembuatan: 2003, Kondisi: siap digunakan (bekas), Diese Battenfeld HM 1600/750 wurde im Jahr 2003 gefertigt. Sie verfügt über eine Schließkraft von 1.600 kN und einen Einspritzdruck von 2.116 bar. Der Schneckendurchmesser beträgt 50 mm, und sie ist mit einem Unilog CC300 B4 Steuerungssystem ausgestattet. Die Maschine eignet sich ideal für präzise Anwendungen im Bereich der hydraulischen Spritzgießtechnik. Für weitere Informationen zu dieser Maschine kontaktieren Sie uns gerne. Anwendungsbereiche Spritzgießen Hfodpfxowwxhbs Adqon

Kondisi: bekas, Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 4.500 kN, diameter sekrup: 75 mm, jarak antara tiang: 800 mm, volume langkah: 1.657 cm³, tinggi cetakan (min.): 300 mm, lintasan ejektor: 250 mm, Perlengkapan: dokumentasi / manual, Машината е в много добро състояние. В цената са включени бункерен сушилня, бункерен захранвач и 3-осен робот. Цената може да бъде намалена, ако машината се закупи без тях. Все още е в експлоатация и е налична за оглед. Цената е натоварена на камион. Hfjdpfxewf Upws Adqen

Tahun pembuatan: 1994, Kondisi: bekas, nomor mesin/kendaraan: 8084/77/01, Ekstrusi Profil Meja Kaliber Hfsdpjxghqhsfx Adqsn

Tahun pembuatan: 2001, Kondisi: siap digunakan (bekas), Two Battenfeld injection molding machines are available: 1) Battenfeld BA 1600, year of manufacture: 2001, clamping force: 1600 kN, tie bar spacing: 520mm/520mm, minimum/maximum mold height: 225mm/550mm, opening stroke: 480mm, centering diameter: 160mm, screw diameter: 50mm, shot weight: 520g. 2) Battenfeld BA 500/200 CDK, year of manufacture: 1995, clamping force: 500 kN, tie bar spacing: 320mm/320mm, platen dimensions X/Y: 490mm/490mm, minimum/maximum mold height: 150mm/350mm, opening stroke: 250mm, max. platen separation: 600mm, screw diameter: 35mm, injection volume: 134.7cm³, shot weight: 122.5g, injection pressure: 1484bar. Machine dimensions X/Y/Z: approx. 3800mm/1350mm/1800mm, weight: approx. 3200kg. The machine has cylinder issues at the screw and the injection unit traverse. Documentation is available. Inspection on site possible. Sale of individual machines possible. Hedewydg Ujpfx Adqjfn

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2009, Central clamping for PE/PP, diameter 450-1200 mm Hjdpew H Iyfsfx Adqofn

Kondisi: sangat baik (bekas), Here we offer a SmartPower 210/1330 Duroplast injection molding machine. Wittmann Battenfeld injection molding machine with UNILOG B8 control system The unit was serviced/inspected by the manufacturer WITTMANN BATTENFELD Deutschland GmbH in January 2021 and brought up to the latest possible standard. As part of the comprehensive inspection, various updates were installed and the hydraulic oil (600 liters) was replaced. In addition to the standard pressure switches, the unit allows for the installation of an additional two cavity pressure sensors (Kistler module for mold cavity pressure switch-over: Range 1: 20,000 pC; Range 2: 10,000 pC). The components for upgrading with cavity pressure sensors are included in the scope of delivery. Injection molding machine: Hodpfxefphtvo Adqjfn Series: SmartPower Machine type: 210/1330 Control system: UNILOG B8 Machine number: 137949-100 Machine weight gross/net Main dimensions of the machine Noise level (DIN EN ISO 3744-46): 65 dB(A) Ambient temperature: +15 - +40°C (+59 - +104°F) Year of manufacture: 2017 Total operating hours: 1,437 h Hydraulic system: Hydraulic oil tank capacity Oil temperature min / max (HLP 32): min 30°C (86°F) / max 40°C (104°F) Oil temperature min / max (HLP 46): min 40°C (104°F) / max 50°C (122°F) Activation temperature for oil cooling (HLP 32): 35°C (95°F) Activation temperature for oil cooling (HLP 46): 45°C (113°F) Electrical system: Drive power, hydraulic pump: 37 kW Motor voltage Frequency Maximum screw barrel temperature: 350°C (662°F) Water system: Oil cooler: Cooling water consumption approx. 0.5 - 1.5 m³/h (0.65 - 1.96 cu yd) Cooling water inlet max. 35°C (95°F) NW ⅜" Cooling water manifold: Cooling water inlet ∅ ¾", max. 10 bar (max. 145 psi) Cooling water return ∅ ¾" SmartPower 210 injection unit 1330 Screw diameter: 50, 55, 65 mm Screw stroke: 275 mm Screw L/D ratio: 22 Theoretical shot volume: 540, 653, 913 cm³ Specific injection pressure: 2470, 2041, 1461 bar Max. screw speed: 278 min-¹ Max. plasticizing rate PS: 42, 52, 62 g/s Screw torque: 1920 Nm Nozzle stroke / force: 400/100 mm/kN Free injection flow rate: 248, 300, 419 cm3/s Cylinder heating capacity: 21.9, 24.2, 27 kW Number of heating zones incl. nozzle: 5 Clamping unit SmartPower 210 Clamping force: 2100 kN Type: SmartPower 210 Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data. Details are not binding!) For further questions, please feel free to contact us by phone.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, de14 Hfsdpfx Adswwxlmeqon

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Battenfeld HM 3500/1900 Injection Moulding Machine Year: 2005 Clamping Unit: - Clamping force: 3500 kN - Platen size (H x V): 1100 mm x 1060 mm - Tie bar distance (H x V): 800 mm x 710 mm - Maximum mold opening stroke: 670 mm - Minimum mold height: 375 mm - Maximum mold height: 710 mm - Daylight opening: 1380 mm - Ejector stroke: 250 mm - Ejector force: 81 kN Injection Unit: - Screw diameter: 55 mm - L/D ratio: 22 - Injection pressure: 2481 bar - Screw stroke: 325 mm - Shot volume: 772 cm³ - Shot weight, PS: 710 g - Injection speed: cm³/s - Screw speed: 294 rpm - Max. plasticizing rate: 68 g/s - Number of heating zones: 1 + 5 Electrical and Hydraulic Equipment: - Installed heating power: 45 kW Hfodpfx Adow Dcxdsqsn - Pump capacity: 26.6 kW - Tank capacity: 660 l Dimensions and Weight: - Machine dimensions (approx.): 7.53 m x 1.79 m x 2.31 m - Total machine weight: 15,200 kg

Tahun pembuatan: 2001, jam operasional: 64.499 h, Kondisi: baik (bekas), Screws conical, approx. 110 kg/h A.C. motor 30.0 kW New motor, 64,499 operating hours Hodpfx Adew Hy Uusqofn

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Battenfeld HM 300/1330 Injection Moulding Machine Control System: B6S Year of manufacture: 2011 Operating hours: 68,680 Clamping Unit: Hodpfx Adjwrmtnoqofn Clamping force [kN]: 3,000 Platen dimensions (H x V) [mm]: 1,020 x 1,030 Clearance between tie bars (H x V) [mm]: 710 x 610 Min./max. mould height [mm]: 375 Maximum opening stroke [mm]: 1,150 Locating ring diameter [mm]: 160 Maximum ejector stroke [mm]: 200 Injection Unit: Screw diameter [mm]: 55 Injection volume [cm³]: 653 Shot weight in PS [g]: 600 Injection pressure [bar]: 2,040 Maximum injection speed: 144 Additional equipment: Pneumatic valve – 4 pcs Core pull – 2 pcs

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Battenfeld HM 300/1330 Injection Moulding Machine Control system: B6S Year of manufacture: 2011 Operating hours: 68,289 Clamping unit: Clamping force [kN]: 3,000 Platen dimensions (H x V) [mm]: 1,020 x 1,030 Tie bar spacing (H x V) [mm]: 710 x 610 Min./Max. mould height [mm]: 375 Max. opening stroke [mm]: 1,150 Hsdpfxjwrmwmj Adqjfn Centering ring diameter [mm]: 160 Maximum ejector stroke [mm]: 200 Injection unit: Screw diameter [mm]: 55 Injection volume [cm³]: 653 Injection weight (PS) [g]: 600 Injection pressure [bar]: 2,040 Max. injection speed: 144 Additional equipment: Pneumatic valve - 4 pcs Core pull - 2 pcs

Tahun pembuatan: 2006, Kondisi: sangat baik (bekas), Battenfeld HM 100/525 Injection Moulding Machine Year: 2006 Control System: Unilog B4 Hjdpsk Rnvmefx Adqefn Technical Specifications Clamping Force: 1000 kN Platen Size (H x V): 680 mm x 594 mm Tie Bar Spacing: 470 mm x 420 mm Mould Opening Stroke: 500 mm Minimum Mould Height: 250 mm Maximum Daylight: 750 mm Hydraulic Ejector Stroke: 150 mm Ejector Force Forward/Backward: 41.2 kN Injection Unit Screw Diameter: 40 mm Ls/D Ratio: 22 Injection Pressure: 2100 bar Injection Volume: 251 cm³ Shot Weight (PS): 228.4 g Injection Stroke: 200 mm Screw Speed: 0 - 318 rpm Maximum Plasticizing Rate: 30.4 g/s Nozzle Pressure: 86 kN Electrical & Hydraulic Equipment Installed Heating Power: 12.1 kW Adjustable Barrel Heating Zones: 1+3 Pump Motor Power: 18.5 kW Hydraulic Oil Capacity: 275 liters Dimensions & Weight Total Machine Weight: 4,600 kg Dimensions (L x W x H): 4.3 x 1.5 x 2.0 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Battenfeld HM 300/1330 Injection Moulding Machine Control System: B6S Year of manufacture: 2012 Operating hours: 65,085 Clamping Unit: Clamping force [kN]: 3,000 Platen dimensions (H x V) [mm]: 1,020 x 1,030 Tie bar spacing (H x V) [mm]: 710 x 630 Min./Max. mould height [mm]: 375 Maximum opening stroke [mm]: 1,175 Centring ring diameter [mm]: 160 Maximum ejector stroke [mm]: 200 Injection Unit: Screw diameter [mm]: 60 Injection volume [cm³]: 913 Shot weight PS [g]: 840 Injection pressure [bar]: 2,040 Maximum injection speed: 144 Additional equipment: Pneumatic valve – 4 pcs Hfjdpfx Adowrmzrsqon Core pull – 2 pcs.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Wittmann Battenfeld EcoPower 110/130 Injection Moulding Machine Electric, energy-efficient machine Control system: UNILOG B6 Year of manufacture: 2011 Clamping force: 110 tons Screw diameter: 25 mm Maximum shot weight: 55.8 g (PS) Tie bar spacing: 470 x 470 mm Hfjdsrn I Nropfx Adqjn Minimum mould height: 200 mm Maximum mould height: 450 mm Hydraulic operating pressure: 210 bar Machine weight: 4,600 kg Dimensions (L x W x H): 420 x 140 x 270 cm The Battenfeld has approximately 60,000 operating hours (the computer in the machine was replaced and the hours were not transferred; currently, the counter shows fewer hours: 4,944).

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Battenfeld HM 110/350 Injection Moulding Machine Hfjdpfx Aju U Ar Ijdqen Year of manufacture: 2012 Control system: Unilog B6 E Injection Unit: Screw diameter: 35 mm Injection pressure: 2083 bar Injection volume: 169 ccm Shot weight: 153 g Clamping Unit: Clamping force: 1100 kN Tie bar spacing: 470 x 420 mm Minimum mould height: 275 mm Opening stroke: 500 mm Maximum mould height: 775 mm Ejector stroke: 150 mm General Information: Machine dimensions (LxWxH): 4.0 x 1.5 x 2.1 m Weight: 4,500 kg Equipment: - The machine is in very good condition and has 35,000 operating hours - Bimetallic screw and barrel - 1 x pneumatic valve - 1 x core pull - Robot interface according to EUROMAP 67