Beli Battenfeld bekas (126)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, WITTMANN BATTENFELD TM 400/3400 Injection Moulding Machine Control system: UNILOG B6P Year of manufacture: 2015 Operating hours: 33,756 ServoPower SO Package: Variable-speed servomotor drive for the hydraulic pump to increase energy efficiency and reduce cycle times, compliant with EUROMAP 60 Cycle II and Cycle III standards. _____ Injection unit technical specifications: • Screw diameter: 85 mm Hjdpfjwqd Tcex Adqofn • L/D ratio (length to diameter): 22 • Specific injection pressure: 1574 bar • Calculated injection volume: 2,128 cm³ • Maximum shot weight (PS): 1,936.4 g _____ Clamping unit technical specifications: • Clamping force: 4,000 kN • Tie-bar spacing: 710 × 710 mm (W × H) • Minimum mould height: 300 mm • Maximum distance between platens: 1,380 mm • Opening stroke: 670 mm

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, jam operasional: 2.611 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 143037-100, gaya penjepit: 3.500 kN, diameter sekrup: 25 mm, jarak antara tiang: 720 mm, diameter kolom: 115 mm, volume langkah: 74 cm³, tekanan injeksi: 2.940 batang, gaya ejektor: 81.000 N, lintasan ejektor: 250 mm, langkah pembukaan: 1.050 mm, panjang total: 11.800 mm, lebar total: 4.700 mm, tinggi total: 6.800 mm, berat keseluruhan: 16.700 kg, kapasitas pemanasan: 2 kW (2,72 hp), tekanan: 2.940 batang, jumlah injeksi: 2, tegangan masuk: 380 V, arus masuk: 225 A, Perlengkapan: dokumentasi / manual, For sale is an as-new injection moulding machine from Wittmann Battenfeld, manufactured in 2023. Included in the sale are a handling system (robot system W873) connected to the machine for automated insert and removal operations, a dosing unit from Nexus Servo MIX e200 Pre (year: 2018), and a temperature control unit from Frigel RCD80/12SP (year: 2021). Operating hours: 2,611 Total shot count (automatic mode): 41,928 Key specifications: Injection moulding system: - Opening stroke extended by 200 mm, total 1,250 mm - Pneumatic core pull for clamping plate Hsdpfx Aew Eupwjdqsfn - Air valves on clamping plate - Injection, holding and back pressure regulated - Nozzle travel cylinder, pressure pad extended by 350 mm - Additional LIM plasticizing unit - Additional vacuum package - Customised safety door and centre console - Electrically operated safety gate on operator side - Water and air distribution block on nozzle and clamping plates - Additional mould monitoring - 4x hot runner temperature control zones - Control cabinet air/air cooling unit - Leveling elements - Wittmann Battenfeld WEB SERVICE Insert and removal handling: Z-axis: Horizontal stroke: 6,000 mm Y-axis: Vertical stroke: 2,800 mm X-axis: Transverse stroke: 2,000 mm General: Payload (part + gripper): 110 kg Compressed air supply: 4–8 bar Connection: 3/8 inch Power supply: 380V–400V, 50 Hz, 2Ph/N/PE 16A Current: 15.5 A Control system: Wittmann CNC8 with emergency-stop The system is fully functional and can be inspected by appointment. Location: 72581 Dettingen an der Erms The equipment is sold as seen, without warranty. The system will be supplied media-free. Dismantling and removal are the responsibility of the buyer.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 137241-100, Perlengkapan: dokumentasi / manual, Robot Wittmann W832PRO-0210 Hfjdpfxew Dcr De Adqen Szczegółowy opis w załączonym pliku Detailed specification in attached file

Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), Clamping force: 1000 kN, tie bar distance: 470 mm / 420 mm, platen dimensions X/Y/Z: 680 mm / 590 mm, opening stroke: 500 mm, daylight: 750 mm, ejector stroke: 150 mm, ejector force: 41.2 kN. Screw diameter: 40 mm, L/D ratio: 22, injection volume: 251 cm³, injection weight: approx. 228 g, injection pressure: 2100 bar, injection stroke: 200 mm. Machine dimensions X/Y/Z: approx. 4300 mm / 1500 mm / 2000 mm, weight: approx. 4600 kg. Documentation available. An on-site inspection is possible. Hfodpfxjw Duvbj Adqjn

Tahun pembuatan: 2010, Kondisi: hampir baru (bekas), BATTENFELD PE PIPE HEAD RK 315 spiral mandrel, screen basket with 315 PE tool Lightly used Condition: As new The pipe head is my property Hsdpfehy Aq Iox Adqjfn Sachal Extrusion Machines Bahnhofstr 6 D-26345 Bockhorn-Grabstede

Tahun pembuatan: 2003, jam operasional: 118.048 h, Kondisi: siap digunakan (bekas), Steuerungseinheit Hersteller: BATTENFELD Modell: UNILOG B4 Diese Battenfeld TM 2700/2800 wurde im Jahr 2003 gefertigt. Es handelt sich um eine hydraulische Spritzgießmaschine mit einer Schließkraft von 270 Tonnen und einem Schneckendurchmesser von 75 mm. Das Arbeitsvolumen beträgt 2.800 cm³, und die Maschine arbeitet mit einem Hydraulikdruck von 210 bar. Nutzen Sie die Gelegenheit zum Kauf dieser Battenfeld TM 2700/2800 hydraulischen Spritzgießmaschine. Kontaktieren Sie uns für weitere Informationen zu dieser Maschine. Hsdpfowpyckex Adqjfn Einsatzbereiche Spritzgießen

Kondisi: baik (bekas), Tahun pembuatan: 2005, Battenfeld HM 270/1330 Injection Moulding Machine Year of manufacture: 2005 Operating hours: 112,163 Clamping unit: Clamping force [kN]: 2,700 Platen dimensions (HxV) [mm]: 1,030 x 1,020 Tie bar spacing (HxV) [mm]: 710 x 630 Min./max. mould height [mm]: 350 Maximum opening stroke [mm]: 1,150 Centring ring diameter [mm]: 160 Maximum ejector stroke [mm]: 200 Injection unit: Screw diameter [mm]: 55 Injection volume [cm³]: 650 Shot weight PS [g]: 565 Injection pressure [bar]: 2,040 Maximum injection speed: 144 Hfjdpfx Aowrmrkedqon Additional equipment: Pneumatic valve – 1 pc. Core pull – 3 pcs.

Kondisi: bekas, Operating unit, control panel, operator panel, operator unit, keyboard, display, controller, hand terminal, control module - Manufacturer: Cyclus Battenfeld, control module from injection moulding machine BA-T2400 / BA 600 CDC / A5002 03 1 04 - Type: MDE-BDE - Quantity: 3 units available - Price: per unit Hfsdpogypu Dofx Adqon - Dimensions: 290/50/190 mm - Weight: 0.8 kg/unit.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Injection molding machine Battenfeld TM Xpress 350/2250 Control system: B6P Year of manufacture: 2014 Operating hours: 49,462 Clamping unit: Clamping force [kN]: 3500 Platen dimensions (H x V) [mm]: 1030 x 1140 Hfodpfx Ajwrm A Aedqjn Tie bar spacing (H x V) [mm]: 710 x 710 Min. / Max. mold height [mm]: 300…710 Max. opening stroke [mm]: 1380 Centering ring diameter [mm]: 160 Max. ejector stroke [mm]: 200 Injection unit: Screw diameter [mm]: 65 Injection volume [cm³]: 1171 Shot weight PS [g]: 1078 Injection pressure [bar]: 2070 Max. injection speed: 600 Additional equipment: Pneumatic valve – 4 pcs. Core pull – 2 pcs. Toggle clamp system after refurbishment

Kondisi: bekas, CNC control, operator panel, control desk, operating unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, valve module, valve amplifier, circuit board -Manufacturer: Bosch, module from Battenfeld injection moulding machine Hfedpfxog Td Dxs Adqon -Valve module: Bosch QV 60 -Dimensions: 220/45/H128 mm -Weight: 0.4 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Battenfeld TM Xpress 350/2250 Injection Moulding Machine Control system: B6P Year of manufacture: 2014 Operating hours: 49,458 Clamping Unit: Clamping force [kN]: 3500 Platen dimensions (h x v) [mm]: 1030 x 1140 Tie bar spacing (h x v) [mm]: 710 x 710 Hfedpfx Aewrm Hzsdqon Min./max. mould height [mm]: 300 – 710 Max. opening stroke [mm]: 1380 Locating ring diameter [mm]: 160 Max. ejector stroke [mm]: 200 Injection Unit: Screw diameter [mm]: 65 Injection volume [cm³]: 1171 Shot weight (PS) [g]: 1078 Injection pressure [bar]: 2070 Max. injection speed: 600 Additional equipment: Pneumatic valve – 4 pcs Core pull – 1 pc Toggle system after overhaul

Kondisi: bekas, Control system, operator panel, operator console, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, valve module, valve amplifier, circuit board, analog distribution card, distribution printed card -Manufacturer: Bachmann, distribution printed card from Battenfeld injection molding machine -Type: CV 4 B 2528/00 -Quantity: 3 modules available -Price: per piece Hfodpfxeg Td D Ae Adqjn -Dimensions: 100/60/H30 mm -Weight: 0.1 kg/unit.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Battenfeld HM 2700 / 1330 Injection Moulding Machine Year of manufacture: 2004 Control system: Unilog B4 Clamping unit: Clamping force: 2,700 kN Platen size (h x v): 1030 mm x 1020 mm Tie bar spacing (h x v): 710 mm x 630 mm Mould opening stroke: 800 mm Minimum mould height: 350 mm Maximum mould height: --- mm Maximum daylight: 1150 mm Hydraulic ejector – stroke: 200 mm Ejector force forward/backward: 59 kN Injection unit: Screw diameter: 55 mm L/D ratio: 22 Injection pressure: 2041 bar Shot volume: 653 ccm Shot weight, PS: 594 g Injection stroke: 400 mm Screw speed: 318 rpm Max. plasticizing rate: 59.3 g/s Nozzle pressure: 100 kN Electrical and hydraulic equipment Installed heating power: 18.2 kW Adjustable barrel heating zones: 1+4 Oil tank capacity: 650 l Hfjdpfjvt Rutjx Adqsn Dimensions and weight Total machine weight: 12,000 kg Dimensions (L x W x H): 5.6 x 1.8 x 2.2 m

Tahun pembuatan: 1992, Kondisi: bekas, Injection moulding machine -Clamping force: 25 t Hfodpfx Adob A H Rnjqen -Screw diameter: 22 mm -Control system: Unilog 2040 -Tie bar spacing: 250 x 250 mm -Data acquisition terminal -Part removal device, manufacturer: ASS -Temperature control unit, manufacturer: Single

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Battenfeld TM 4500/1900 Injection Moulding Machine Hedpfjwrihzox Adqjfn Year of manufacture: 2005 Control system: Unilog B4 Clamping unit: Clamping force: 4500 kN Minimum mould height: 425 mm Maximum mould height: 770 mm Tie bar spacing: 800 x 800 mm Mounting platen dimensions: 1155 x 1195 mm Mould opening stroke: 760 mm Injection unit: Screw diameter: 65 mm Shot weight (PS): 930 g Shot volume: 1078 cm³ Specific injection pressure: 1776 bar Robot interface: Euromap 12 Machine dimensions: 8.3 x 1.9 x 2.4 m Weight: 20,400 kg Oil tank capacity: 800 litres

Kondisi: bekas, Hydraulic power unit, hydraulic pump, universal hydraulic unit, hydraulic station, injection moulding machine, plastic injection moulding machine, injection press. - Manufacturer: Flutec, hydraulic power unit from a Battenfeld BA 600 CDC injection moulding machine Hedpfx Aog Dvx Nodqjfn - Type: PT-350/4.0/M/ FL086-E - Pump: Brueninghaus type A10VS 0 71 DFR1/31 210 bar - Motor: Brandstetter 11 kW / 1450 rpm - Individual components: see photos - Dimensions: 1130/430/H350 mm - Weight: 152 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Battenfeld TM 180/525 Injection Moulding Machine Year of manufacture: 2015 Operating hours: 44,753 Control system: B6P Clamping unit: Clamping force [kN]: 1800 Platen dimensions (H x V) [mm]: 1020 x 1030 Tie bar spacing (H x V) [mm]: 520 x 520 Min./max. mould height [mm]: 225…550 Maximum opening stroke [mm]: 1200 Centring ring diameter [mm]: 160 Maximum ejector stroke [mm]: 180 Injection unit: Screw diameter [mm]: 40 Injection volume [cm3]: 288 Shot weight in PS [g]: 251 Injection pressure [bar]: 2100 Maximum injection speed [mm/s]: 125 Additional equipment: Pneumatic valve – 3 pcs. Hfjdswrmkmepfx Adqjn Core pull – 1 pc.

Kondisi: bekas, CNC control, operator panel, control desk, operating unit, card slot, control cards, MC3 controller, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, analog distribution card, distribution board, valve amplifier, bus board, bus PCB, processor card, interface card, temperature control card Hfodpfx Ajhbiwisdqsn -Manufacturer: Bachmann, electronic control modules from Battenfeld injection molding machine -Input card: Bachmann CE 32/1 B 2600/01 4 pcs -Output card: Bachmann CA 16/P 2.5 B 2596/00 5 pcs -Processor card: Bachmann CC 11/3 2 pcs -Control card: Bachmann VID 500 B 2565/00 -Memory card: Bachmann MEM 501 B 4018/00 -Processor card: Bachmann STU 500 U B 2623/00 -Processor card: Bachmann STU 500 U B 4749/00 -Control card: Bachmann MF 600/1 KOP 500 U and KOP 500 Z B 2563/01 -Power supply: Bachmann SNT 411/2 -Card rack: Bachmann BUS 618/1 BALS500 B 2568/00 -Analog card: Bachmann AIO 500 B 2585/00 2 pcs -Temperature control card: Bachmann UTI 06 F1 B 2932/01 -Temperature control card: Bachmann UTR 300 -Price/Sale: complete -Overall dimensions: 435/240/H270 mm -Weight: 8.7 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, BATTENFELD HM 60/350 S Injection Moulding Machine Year of manufacture: 2008 Injection Unit: Screw diameter: 35 mm Shot weight: 153.8 g Injection pressure: 2083 bar Injection volume: 169 ccm Clamping Unit: Hedpek Rnq Nefx Adqjfn Clamping force: 60 t Tie bar spacing: 370x320 mm Max. platen size: 550x530 mm Ejector: hydraulic Clamping system: hydraulic Control system: UNILOG B6 Additional equipment: Machine in very good technical condition Euromap 67 interface Dimensions: Weight: 3100 kg Length/Width/Height: 3.79x1.24x1.88 m Power supply: Pump/Motor: 15 kW Heaters: 10.4 kW Total: 25.4 kW

Kondisi: bekas, EN: CNC control, operator panel, control console, operating unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit board, analog distribution card, distribution print card, valve amplifier, bus board, bus PCB, processor card, coupling card, temperature controller card Hodpfog Tizmex Adqofn -Manufacturer: Bachmann, distribution print card from Battenfeld injection molding machine -Type: Bachmann CV 16 P7,5 : 2530/00 -Quantity: 5 cards available -Price: per piece -Dimensions: 145/80/H40 mm -Weight: 0.1 kg/pc.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Battenfeld HM 110/350 Injection Moulding Machine Year of manufacture: 2010 Control System: Unilog B6 Operating hours: 35,000 Injection Unit: - Screw diameter: 35 mm - Injection pressure: 2083 bar - Injection volume: 169 ccm - Shot weight: 153 g Clamping Unit: - Clamping force: 1,100 kN - Distance between tie bars: 470 x 420 mm - Minimum mould height: 275 mm - Maximum mould height: 775 mm - Opening stroke: 500 mm - Ejector stroke: 150 mm Hfsdpowq D Nqjfx Adqen General Information: - Machine dimensions (LxWxH): 4.0 x 1.5 x 2.1 m - Weight: 4,500 kg Specification: 1. Plasticizing unit with a 35mm screw diameter. 2. (06.X17) UNILOG B6 Euro-package consisting of: - 07.D00 adjustment components, - 02.K02 time-controlled air valve - 01.C01 NW 6 hydraulic core pull control on moving platen - 06.B21 robot interface according to EUROMAP 67 - 06.R02 Two 16A Schuko outlets mounted on the side of the control cabinet - 06.R20 Two 16A CEE sockets mounted on the side of the control cabinet 3. 06X06 UNILOG B6S Package comprising: - extended control system functions with additional programs - APS system - cycle time analysis - user pages - graphical visualization of actual values as 16 real-time curves - 4 envelope curves - extended alarm and event log for up to 10,000 events - Quality Table function extended for the last 10,000 cycles - additional USB ports for network connections - keypad with membrane buttons - SPC – Statistical Process Control of injection process - Injection speed, plastification and holding pressure controlled by servo valve 4 machines available in perfect condition.

Kondisi: bekas, Glass scale, glass measuring scale, scale, digital display, measuring scale, length measuring system, length measuring device, linear scale, position display, digital scales, digital scale for digital display, linear encoder, linear encoder -Length measuring device: from Battenfeld BA-T2400 injection molding machine, 2 pieces -Measuring length: approx. 950 mm Hfjdpegzwxhefx Adqsn -Price/sale: as a complete set -Dimensions: 1060/35/H85 mm -Weight: 4 kg/each

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, WITTMANN BATTENFELD MacroPower 900/8800 Injection Moulding Machine Servo-hydraulic injection moulding machine Clamping force: 9,000 kN (900 tons) 🔹 General information: Year of manufacture: 2017 Control system: UNILOG B8 Installed power: 53.9 kW Operating hours: only 999 Dry cycle time: 4.0 – 770 sec/mm Machine dimensions (L x W x H): 10,100 × 3,400 × 2,700 mm Machine weight: 35,200 kg 🔹 Injection unit: Screw diameter: 105 mm Injection volume: 4,545 cm³ Screw rotation speed: 159 rpm Screw L/D ratio: 22 Nozzle stroke / max. force: 129 mm / 950 kN Hfjdpfx Adswzy N Usqon Max. nozzle traverse stroke: 525 mm Number of heating zones: 7 🔹 Clamping unit: Clamping force: 9,000 kN Max. mould opening stroke: 1,800 mm Min. / Max. mould height: 600 mm / 1,200 mm Max. daylight (between platens): 2,400 mm Tie bar spacing (H × V): 1,450 × 1,100 mm Ejector stroke / force: 300 mm / 165 kN Mould opening force: 300 kN Core pulls: 2

Kondisi: bekas, Control panel, injection molding machine, injection moulding machine, plastic injection molding machine, plastic injection moulding machine, plastic injection press -Hydraulic control block origin: from an injection moulding machine -Manufacturer: Battenfeld -Dimensions: 380/180/H300 mm Hodedx Nvpopfx Adqofn -Weight: 17 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Battenfeld Injection Moulding Machine HM 300/1330 Control system: B6S Year of manufacture: 2011 Operating hours: 68,038 Clamping Unit: Clamping force [kN]: 3,000 Hjdpfx Adewrmqmsqjfn Platen dimensions (H x V) [mm]: 1,020 x 1,030 Tie bar spacing (H x V) [mm]: 710 x 610 Min./Max. mould height [mm]: 375 Maximum opening stroke [mm]: 1,150 Centring ring diameter [mm]: 160 Maximum ejector stroke [mm]: 200 Injection Unit: Screw diameter [mm]: 55 Injection volume [cm³]: 653 Shot weight in PS [g]: 600 Injection pressure [bar]: 2,040 Maximum injection speed: 144 Additional equipment: Pneumatic valve – 4 units Core pull – 2 units