Beli Battenfeld bekas (109)

Kondisi: bekas, Battenfeld plasticizing cylinder Ø 18 mm, IU60 vertical – removed from Battenfeld VM75/60/60 R1040 - Removed from an operational machine - Fully functional Inlet: 18.03 mm Ksdpsrr Efrjfx Aa Noll Center: 18.01 mm Outlet: 18.02 mm Displacement volume: 22.9 cm³ Injection pressure: 2,593 bar Manufacturer: Battenfeld Model: Ø 18 mm, IU60 vertical Spare part no.: 100WW548 Condition: used

Kondisi: baik (bekas), Tahun pembuatan: 2007, 18588 Kjdpfx Aajxdk Auj Noll

Tahun pembuatan: 1998, Kondisi: siap digunakan (bekas), 1 Kjdpjxq Exqefx Aa Njll

Tahun pembuatan: 2007, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1785-6201, Pengekstrusi sekrup tunggal Klsdpfx Aju Itqdoa Nol

Kondisi: bekas, Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 4.500 kN, diameter sekrup: 75 mm, jarak antara tiang: 800 mm, volume langkah: 1.657 cm³, tinggi cetakan (min.): 300 mm, lintasan ejektor: 250 mm, Perlengkapan: dokumentasi / manual, Машината е в много добро състояние. В цената са включени бункерен сушилня, бункерен захранвач и 3-осен робот. Цената може да бъде намалена, ако машината се закупи без тях. Все още е в експлоатация и е налична за оглед. Цената е натоварена на камион. Kjdewf Upwspfx Aa Noll

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Single-screw extruder Battenfeld BEX 1-75-30:B with co-extruder BEX 1-35-30:B Application: PE, PP Year of construction: 2006 Screw diameter: 75 mm Drive: Baumüller 171 kW Speed: 2,450 rpm Combined output: approx. 850 kg/h In 2014, the extruder was retrofitted by Battenfeld with a frequency inverter, new three-phase motor (brushless), and frequency converter. Gearbox was overhauled in July 2024. Condition: The extruder is in very good condition. Last use: PE pipes Battenfeld Co-Extruder BEX 1-35-30:D Application: PE pipes Connected load: 69 kVA Output: approx. 110 kg/h Kledpoug Edkefx Aa Nol Year of construction: 2010 Condition: The extruder is in very good condition. Ownership: The extruder is my property. Location: D-26345 Bockhorn-Grabstede, Bahnhofstr 6, Germany

Tahun pembuatan: 1990, Kondisi: baik (bekas), This haul-off machine, manufactured by Battenfeld Extrusionstechnik GmbH, is currently located at the machinery storage facility of Plastima Used Machinery. The equipment, a Haul-Off R630/6V model, dates from the year 1990. Brand: Battenfeld Extrusionstechnik GmbH Model: Haul-Off R630/6V Year of construction: 1990 Voltage: 380 V Kledpsrrv Uwsfx Aa Nsl Power: 4.5 kW Maximum pipe diameter: 110 mm to 630 mm

Kondisi: bekas, Tahun pembuatan: 1994, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 8084/11/30, Gergaji untuk ekstrusi profil Kledpfjxghrxsx Aa Njl

Kondisi: bekas, Tahun pembuatan: 1994, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 8084/77/10, Unit Haul-off 350 mm Kljdpfx Aasxghq Ij Nsl

Tahun pembuatan: 1994, Kondisi: bekas, nomor mesin/kendaraan: 8084/77/01, Ekstrusi Profil Meja Kaliber Kedpfx Aasxghqho Njll

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 57212, gaya penjepit: 4.500 kN, diameter sekrup: 75 mm, tekanan injeksi: 1.739 batang, tinggi cetakan (min.): 425 mm, lebar pelat: 1.155 mm, tinggi pelat: 1.195 mm, TECHNICAL DETAILS Clamping force: 4,500 kN Minimum mould height: 425 mm Maximum mould height: 770 mm Tie bar distance: 800 x 800 mm Platen dimensions: 1,155 x 1,195 mm Mould opening stroke: 760 mm Injection Unit Screw diameter: 75 mm Shot weight (PS): 1,506 g Injection volume: 1,657 cm³ Specific injection pressure: 1,739 bar MACHINE DETAILS Control system: Unilog B4 Machine dimensions: 8.3 x 1.9 x 2.4 m Weight: 20,400 kg Robot interface: Euromap 12 Oil tank capacity: 800 litres Kjdpfxswp Iqij Aa Noll Hydraulic pressure: 210 bar Rated power electric motor: 99 A

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Battenfeld HM 3500/1900 Injection Moulding Machine Year: 2005 Clamping Unit: Klodpfx Aaow Dcxde Njl - Clamping force: 3500 kN - Platen size (H x V): 1100 mm x 1060 mm - Tie bar distance (H x V): 800 mm x 710 mm - Maximum mold opening stroke: 670 mm - Minimum mold height: 375 mm - Maximum mold height: 710 mm - Daylight opening: 1380 mm - Ejector stroke: 250 mm - Ejector force: 81 kN Injection Unit: - Screw diameter: 55 mm - L/D ratio: 22 - Injection pressure: 2481 bar - Screw stroke: 325 mm - Shot volume: 772 cm³ - Shot weight, PS: 710 g - Injection speed: cm³/s - Screw speed: 294 rpm - Max. plasticizing rate: 68 g/s - Number of heating zones: 1 + 5 Electrical and Hydraulic Equipment: - Installed heating power: 45 kW - Pump capacity: 26.6 kW - Tank capacity: 660 l Dimensions and Weight: - Machine dimensions (approx.): 7.53 m x 1.79 m x 2.31 m - Total machine weight: 15,200 kg

Tahun pembuatan: 2006, Kondisi: sangat baik (bekas), Battenfeld HM 100/525 Injection Moulding Machine Year: 2006 Control System: Unilog B4 Technical Specifications Clamping Force: 1000 kN Ksdpfjk Rnvmex Aa Njll Platen Size (H x V): 680 mm x 594 mm Tie Bar Spacing: 470 mm x 420 mm Mould Opening Stroke: 500 mm Minimum Mould Height: 250 mm Maximum Daylight: 750 mm Hydraulic Ejector Stroke: 150 mm Ejector Force Forward/Backward: 41.2 kN Injection Unit Screw Diameter: 40 mm Ls/D Ratio: 22 Injection Pressure: 2100 bar Injection Volume: 251 cm³ Shot Weight (PS): 228.4 g Injection Stroke: 200 mm Screw Speed: 0 - 318 rpm Maximum Plasticizing Rate: 30.4 g/s Nozzle Pressure: 86 kN Electrical & Hydraulic Equipment Installed Heating Power: 12.1 kW Adjustable Barrel Heating Zones: 1+3 Pump Motor Power: 18.5 kW Hydraulic Oil Capacity: 275 liters Dimensions & Weight Total Machine Weight: 4,600 kg Dimensions (L x W x H): 4.3 x 1.5 x 2.0 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, WITTMANN BATTENFELD TM 400/3400 Injection Moulding Machine Control system: UNILOG B6P Year of manufacture: 2015 Operating hours: 33,756 ServoPower SO Package: Variable-speed servomotor drive for the hydraulic pump to increase energy efficiency and reduce cycle times, compliant with EUROMAP 60 Cycle II and Cycle III standards. _____ Injection unit technical specifications: • Screw diameter: 85 mm • L/D ratio (length to diameter): 22 • Specific injection pressure: 1574 bar • Calculated injection volume: 2,128 cm³ • Maximum shot weight (PS): 1,936.4 g Ksdpowqd Tcjfx Aa Nsll _____ Clamping unit technical specifications: • Clamping force: 4,000 kN • Tie-bar spacing: 710 × 710 mm (W × H) • Minimum mould height: 300 mm • Maximum distance between platens: 1,380 mm • Opening stroke: 670 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Wittmann Battenfeld EcoPower 110/130 Injection Moulding Machine Electric, energy-efficient machine Control system: UNILOG B6 Year of manufacture: 2011 Ksdpfx Aorn I Nrea Njll Clamping force: 110 tons Screw diameter: 25 mm Maximum shot weight: 55.8 g (PS) Tie bar spacing: 470 x 470 mm Minimum mould height: 200 mm Maximum mould height: 450 mm Hydraulic operating pressure: 210 bar Machine weight: 4,600 kg Dimensions (L x W x H): 420 x 140 x 270 cm The Battenfeld has approximately 60,000 operating hours (the computer in the machine was replaced and the hours were not transferred; currently, the counter shows fewer hours: 4,944).

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Battenfeld HM 2700 / 1330 Injection Moulding Machine Year of manufacture: 2004 Control system: Unilog B4 Ksdpevt Rutefx Aa Nell Clamping unit: Clamping force: 2,700 kN Platen size (h x v): 1030 mm x 1020 mm Tie bar spacing (h x v): 710 mm x 630 mm Mould opening stroke: 800 mm Minimum mould height: 350 mm Maximum mould height: --- mm Maximum daylight: 1150 mm Hydraulic ejector – stroke: 200 mm Ejector force forward/backward: 59 kN Injection unit: Screw diameter: 55 mm L/D ratio: 22 Injection pressure: 2041 bar Shot volume: 653 ccm Shot weight, PS: 594 g Injection stroke: 400 mm Screw speed: 318 rpm Max. plasticizing rate: 59.3 g/s Nozzle pressure: 100 kN Electrical and hydraulic equipment Installed heating power: 18.2 kW Adjustable barrel heating zones: 1+4 Oil tank capacity: 650 l Dimensions and weight Total machine weight: 12,000 kg Dimensions (L x W x H): 5.6 x 1.8 x 2.2 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Battenfeld TM 4500/1900 Injection Moulding Machine Year of manufacture: 2005 Control system: Unilog B4 Clamping unit: Clamping force: 4500 kN Minimum mould height: 425 mm Maximum mould height: 770 mm Tie bar spacing: 800 x 800 mm Mounting platen dimensions: 1155 x 1195 mm Mould opening stroke: 760 mm Injection unit: Screw diameter: 65 mm Shot weight (PS): 930 g Shot volume: 1078 cm³ Specific injection pressure: 1776 bar Robot interface: Euromap 12 Machine dimensions: 8.3 x 1.9 x 2.4 m Weight: 20,400 kg Oil tank capacity: 800 litres Klodpfxowrihzj Aa Nol

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Battenfeld TM 180/525 Injection Moulding Machine Year of manufacture: 2015 Operating hours: 44,753 Control system: B6P Clamping unit: Clamping force [kN]: 1800 Platen dimensions (H x V) [mm]: 1020 x 1030 Tie bar spacing (H x V) [mm]: 520 x 520 Min./max. mould height [mm]: 225…550 Maximum opening stroke [mm]: 1200 Centring ring diameter [mm]: 160 Maximum ejector stroke [mm]: 180 Injection unit: Screw diameter [mm]: 40 Injection volume [cm3]: 288 Klodpewrmkmjfx Aa Nol Shot weight in PS [g]: 251 Injection pressure [bar]: 2100 Maximum injection speed [mm/s]: 125 Additional equipment: Pneumatic valve – 3 pcs. Core pull – 1 pc.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, BATTENFELD HM 60/350 S Injection Moulding Machine Year of manufacture: 2008 Injection Unit: Screw diameter: 35 mm Shot weight: 153.8 g Injection pressure: 2083 bar Injection volume: 169 ccm Clamping Unit: Clamping force: 60 t Tie bar spacing: 370x320 mm Max. platen size: 550x530 mm Ejector: hydraulic Clamping system: hydraulic Control system: UNILOG B6 Additional equipment: Machine in very good technical condition Euromap 67 interface Dimensions: Weight: 3100 kg Length/Width/Height: 3.79x1.24x1.88 m Power supply: Pump/Motor: 15 kW Heaters: 10.4 kW Total: 25.4 kW Klsdpfx Ask Rnq Nsa Njl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, WITTMANN BATTENFELD MacroPower 900/8800 Injection Moulding Machine Servo-hydraulic injection moulding machine Clamping force: 9,000 kN (900 tons) 🔹 General information: Year of manufacture: 2017 Control system: UNILOG B8 Installed power: 53.9 kW Operating hours: only 999 Dry cycle time: 4.0 – 770 sec/mm Machine dimensions (L x W x H): 10,100 × 3,400 × 2,700 mm Machine weight: 35,200 kg 🔹 Injection unit: Screw diameter: 105 mm Injection volume: 4,545 cm³ Screw rotation speed: 159 rpm Screw L/D ratio: 22 Nozzle stroke / max. force: 129 mm / 950 kN Max. nozzle traverse stroke: 525 mm Number of heating zones: 7 🔹 Clamping unit: Clamping force: 9,000 kN Max. mould opening stroke: 1,800 mm Min. / Max. mould height: 600 mm / 1,200 mm Max. daylight (between platens): 2,400 mm Ksdowzy N Uepfx Aa Nell Tie bar spacing (H × V): 1,450 × 1,100 mm Ejector stroke / force: 300 mm / 165 kN Mould opening force: 300 kN Core pulls: 2

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Battenfeld Injection Moulding Machine HM 300/1330 Control system: B6S Year of manufacture: 2011 Operating hours: 68,038 Clamping Unit: Clamping force [kN]: 3,000 Platen dimensions (H x V) [mm]: 1,020 x 1,030 Tie bar spacing (H x V) [mm]: 710 x 610 Kjdpfowrmqmjx Aa Nsll Min./Max. mould height [mm]: 375 Maximum opening stroke [mm]: 1,150 Centring ring diameter [mm]: 160 Maximum ejector stroke [mm]: 200 Injection Unit: Screw diameter [mm]: 55 Injection volume [cm³]: 653 Shot weight in PS [g]: 600 Injection pressure [bar]: 2,040 Maximum injection speed: 144 Additional equipment: Pneumatic valve – 4 units Core pull – 2 units

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Battenfeld HM 110/350 Injection Moulding Machine Year of manufacture: 2010 Control System: Unilog B6 Kljdpfx Ajwq D Nqja Njl Operating hours: 35,000 Injection Unit: - Screw diameter: 35 mm - Injection pressure: 2083 bar - Injection volume: 169 ccm - Shot weight: 153 g Clamping Unit: - Clamping force: 1,100 kN - Distance between tie bars: 470 x 420 mm - Minimum mould height: 275 mm - Maximum mould height: 775 mm - Opening stroke: 500 mm - Ejector stroke: 150 mm General Information: - Machine dimensions (LxWxH): 4.0 x 1.5 x 2.1 m - Weight: 4,500 kg Specification: 1. Plasticizing unit with a 35mm screw diameter. 2. (06.X17) UNILOG B6 Euro-package consisting of: - 07.D00 adjustment components, - 02.K02 time-controlled air valve - 01.C01 NW 6 hydraulic core pull control on moving platen - 06.B21 robot interface according to EUROMAP 67 - 06.R02 Two 16A Schuko outlets mounted on the side of the control cabinet - 06.R20 Two 16A CEE sockets mounted on the side of the control cabinet 3. 06X06 UNILOG B6S Package comprising: - extended control system functions with additional programs - APS system - cycle time analysis - user pages - graphical visualization of actual values as 16 real-time curves - 4 envelope curves - extended alarm and event log for up to 10,000 events - Quality Table function extended for the last 10,000 cycles - additional USB ports for network connections - keypad with membrane buttons - SPC – Statistical Process Control of injection process - Injection speed, plastification and holding pressure controlled by servo valve 4 machines available in perfect condition.

Kondisi: baru, NEW! Screw & barrel, incl. heating band Screw: 35 mm Injection unit: 350 Article no.: LA198 Kjdpsilhvdjfx Aa Nell

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, jam operasional: 65.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.100 kN, diameter sekrup: 35 mm, Perlengkapan: dokumentasi / manual, Machine in excellent condition, ready for use and regularly maintained. Kjdewxtivspfx Aa Njll

Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), Clamping force: 1000 kN, tie bar distance: 470 mm / 420 mm, platen dimensions X/Y/Z: 680 mm / 590 mm, opening stroke: 500 mm, daylight: 750 mm, ejector stroke: 150 mm, ejector force: 41.2 kN. Screw diameter: 40 mm, L/D ratio: 22, injection volume: 251 cm³, injection weight: approx. 228 g, injection pressure: 2100 bar, injection stroke: 200 mm. Machine dimensions X/Y/Z: approx. 4300 mm / 1500 mm / 2000 mm, weight: approx. 4600 kg. Documentation available. An on-site inspection is possible. Ksdpfxow Duvbs Aa Noll