Beli Bellow bekas (176)

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP3 with 3-axis digital readout RSF Elektronik Z-530!! Technical specifications: >> Year of manufacture: approx. 1975, Machine no. 0681 >> Swivel-tilt table (newly overhauled) >> Spindle speed: 40 - 2000 rpm >> Feed and rapid traverse on 3 axes >> Drive power: 3 kW >> Travel (X/Y/Z): 500/300/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK-40 >> Clamping system M16 >> Weight approx. 1300 kg Crodpfxoxu E I He Anzjg Accessories and features: >> 3-axis digital readout RSF Elektronik Z-530 >> Coolant system >> Central lubrication About the machine: Offered is a Deckel FP3 universal milling machine in good condition. All spindles move smoothly. Most of the bellows are new. The swivel-tilt table is as good as new. An oil change has been performed. Mechanically and electrically tested. The digital readout makes working easier and even more precise. Take the opportunity to inspect and test the Deckel on site under power. The machine is immediately available!!!

Kondisi: sangat baik (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain Digital Readout in special light grey paintwork, CE compliant!!! Technical Data: >> Year of manufacture: 1987, Machine No. 2203-2790 >> Fixed-angle table (newly planed) >> Spindle speed: 50 - 2500 rpm >> Feed: 8 – 630 mm/min >> Motor power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head can be shifted 150 mm on spindle carrier >> Vertical and horizontal quills - SK40 taper >> Vertical quill extendable by 90 mm Cjdexctyajpfx Anzorg >> Drawbar system M16 >> Weight approx. 1500 kg Accessories and Features: >> 3-axis Heidenhain digital readout >> Coolant system >> Chip tray >> Central lubrication About the Machine: Offered here is a Deckel FP4M universal milling machine, CE compliant, in very good condition. The machine has been partially overhauled, has minimal backlash, and all leadscrews move smoothly and evenly. The milling machine runs quietly, even at maximum speeds. Rapid traverse is available on all axes, and all bellows are new. The fixed-angle table has been newly planed. This is a reliable and user-friendly machine. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and more precise. You are welcome to inspect and test the machine under power at our premises.

Tahun pembuatan: 1992, jam operasional: 100 h, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Deskripsi Mesin crimper sudut untuk menekan profil dengan tinggi hingga 68 mm. Gaya penekanan yang sangat tinggi dicapai oleh silinder bellow berkapasitas besar (bebas perawatan). Mesin mudah disesuaikan dan dioperasikan. Bantalan lawan dapat diposisikan secara pneumatik dengan penguncian mekanis Lengan penyangga dan bilah penekan sudah termasuk dalam standar Pengoperasian dua tangan untuk keamanan Opsi Penopang tambahan Mata pisau penekan khusus Data Teknis Tinggi penekanan: 68 mm Crodpfx Aox Rvl Renzeg Gaya penekanan: 40 kN (4 t) Penggerak: Pneumatik Pasokan udara tekan: 7 bar Konsumsi udara per siklus: 30 l Dimensi (P × L × T): 650 × 820 × 1.270 mm Berat: 205 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 14.136 h, jarak pergerakan sumbu X: 1.300 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 800 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC530, beban meja: 400 kg, kecepatan spindel (maks.): 15.000 rpm, daya motor spindle: 16.000 W, jumlah sumbu: 4, This 4-axis Matec MATEC 30 HV/K was manufactured in 2007 and is distinguished by its robust vertical machining center design. It is equipped with a Rexroth control system, a standard spindle with a speed range of 20–15,000 rpm, and a maximum torque of 100 Nm. The machine includes a tool changer with a capacity for 36 tools and a machine table capable of supporting up to 400 kg. If you are looking for a high-quality milling machine, you should consider the Matec MATEC 30 HV/K we are offering for sale. Please contact us for further information. Machine Advantages Qualitative Machine Advantages Crjdpfsx D Ix Tsx Anzog • The machine is from 2007 but was retrofitted in 2016. Technical Machine Advantages • Hard drive: 26 GB • Integrated network card • Max. torque: 100 Nm (40% duty cycle) • Temperature-controlled liquid cooling • Work area: fully enclosed with roof, bellows (steel lamella) • Installation: Height-adjustable leveling feet • The Matec HV 30 was overhauled in 2016 by the manufacturer Matec Maschinenbau Additional Information Cooling & Accessories Coolant: High-pressure coolant supply (20 bar, optionally 40 bar) Paper band filter (30 μm fineness) Tank capacity: 450 l Chip conveyor: Integrated scraper conveyor Oil mist extraction: Electrostatic filter (1,000 m³/h) Measuring & Safety Technology Direct measuring system: Linear encoders on all axes 3D measuring probe: Wireless transmission to the control system Tool monitoring: Laser-assisted tool breakage monitoring Tool length measurement (software) Optional Spindle (HSK 63-A): Higher performance: 30 kW / 190 Nm Drilling capacity (steel): up to 60 mm Milling performance: approx. 500 cm³/min Technical Specification Taper Size HSK 63

Kondisi: baru, TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW Cooling capacity: up to 116 kW Medium: Oil up to 350°C Maximum external volume: 66 l at 350°C Max. flow rate: up to 150 l/min Max. delivery pressure: up to 8.0 bar Motor power: 2.8 or 4 kW Codpfog Ey Rfox Anzerg Dimensions (LxWxH): 1,414 x 503 x 1,350 mm (without connections in continuous bypass) Weight: approx. 225-320 kg Circulation medium connection: Flange DN25 PN16-40 (DIN EN 1092-1), Form B1 EQUIPMENT HIGHLIGHTS: - Control and regulation unit: Smart Controller (7" touch display) - Heater control via solid state relays - Control cabinet IP54 - Cooling controlled by solenoid valve - Flow measurement by differential pressure method - Bypass between supply and return with reduced cross-section - Level monitoring by magnetic float switch - Flow monitoring by detection of heater surface temperature and flow rate - Dirt filter in cooling water inlet and in return of circulation system - Monitoring of supply temperature by electronic safety temperature limiter - External oil filler neck - DILO-type fittings on internal piping connections (except pump connections) - At 350°C: Continuous bypass, including bellows valves - Connection for nitrogen blanket with manometer and safety valve set to 0.5 bar at 350°C (option) Visit our website for more details or for other performance classes. Device complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific deviations from the standard are specified in quotations or order confirmations.

Kondisi: bekas, Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, gaya tekuk (maks.): 36 t, TRUBEND CELL 7000 Hochleistungs-Aut. Biegezelle Baujahr: 05/2017 ZUSÄTZLICHE Funktionen: Credpfx Aeyalx Rsnzeg ToolMaster Bend (inkl. Tool Identification System - TIS) Werkzeuggreifer für schnelleren Werkzeugwechsel (nur in Verbindung mit ToolMaster Bend und Greiferwechselmodul) Förderband Zusätzliche Systempalette Zusätzlicher mechanischer Greifer (ohne Backen) Zusätzliche Backen für mechanischen Finger-Greifer Greiferwechselmodul inkl. Werkzeugreinigungsstation Mehrfachsauger mit Flachsaugern und Elektromagneten TCB - Dickenkontrolliertes Biegen STANDARD Ausführung: TruBend 7036 Cell Edition - Stabiler Maschinenrahmen - Elektromechanischer Direktantrieb (Torque-Motor) - 6-Achs-Hinteranschlagsystem mit Anschlagsensor - Segmentierte Wila-Werkzeugklemmung ohne Tool Identification System (TIS) ACHTUNG: Untere Werkzeugklemmung im selben Design wie die obere Werkzeugklemmung - Schaltschrank-Klimatisierung BendMaster (15) - Stabiler Rahmen und Manipulator - Traglast: 15 kg, max. Blechlast: 3 kg - Bodenschienen: Geschweißte Konstruktion mit stabiler Führungsbahn; Verfahrweg 3215 mm - Greiferkupplung am BendMaster - Elektrische Antriebe - Mechanischer Finger-Greifer mit Backen LoadMaster Bend - Handhabungssystem - Mehrfachsauger mit Balgsaugern - Doppelblecherkennung und -vereinzelung - Übergabestation - Systempalette Sicherheit - Schutzzelle mit Schwing-Schiebetüren: Der gesamte Arbeits- und Gefahrenbereich ist durch eine Schutzzelle abgesichert Beleuchtung Steuerungssystem - PC-Steuerung mit 19“ Touchscreen - Mobiles Bedienpanel - Netzwerkanschluss - Teleservice via Internet

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Baru, Leybold/VAT Leycon HV-Schieber dengan bellow 6528450, sepenuhnya berfungsi, dijual dari stok lama, dengan garansi 6 bulan. Pengiriman ke seluruh dunia tersedia – silakan minta penawaran! Crodpfxeyrr She Anzjg Jika Anda mencari pompa vakum, aksesori, atau peralatan terkait teknologi vakum lainnya, silakan hubungi kami. Kami dengan senang hati membantu Anda dalam pembelian, konsultasi teknis, atau pengembangan solusi khusus.

Kondisi: baru, Tahun pembuatan: 2026, Based on our many years of experience in service, we decided to develop and manufacture our own milling machines. The FPS 500M is a conventional milling machine, perfect for training and production environments. The Heidenhain Positip 8016 Aktiv digital display allows for precise positioning, such as creating and approaching bolt hole circles. Control System Heidenhain Positip 8016 Aktiv – Digital Readout Spindle Speed 0 – 3000 rpm, geometrically stepped direct-drive gearbox with 16 speed settings for maximum torque and milling performance Feed 0 to 500 mm/min, infinitely variable Rapid Traverse 1.5 m/min Quill Extendable quill, vertical travel 80 mm, SK40 Optional: horizontal work spindle or extendable horizontal quill (approx. 100 mm travel) Tool Clamping System: Hydraulic drawbar – DIN 69872 Optional: DIN 2080 Axes X/Y/Z 500/400/400 mm Table Fixed angle table 800 x 480 mm Equipment • Vertical and horizontal spindle • Milling head manually swivels +/- 90° • Attached chip tray • Machine lamp • Centralized lubrication • Z-axis bellows Crodpeh Su Ipofx Anzsg Options • Universal table • Rotary table • Slotting attachment • Dividing head • Steady rest • etc. Further technical data can be found in the attached data sheet.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1984, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 300 mm, jarak lintasan sumbu Y: 150 mm, jarak gerak sumbu Z: 340 mm, gores kuas bulu: 80 mm, kecepatan spindel (maks.): 2.000 rpm, kecepatan spindel (min.): 40 rpm, panjang meja: 210 mm, lebar meja: 600 mm, tinggi total: 1.750 mm, panjang total: 1.400 mm, lebar total: 1.600 mm, kecepatan rotasi (maks.): 2.000 rpm, kecepatan rotasi (min.): 40 rpm, berat keseluruhan: 850 kg, beban meja: 200 kg, masa garansi: 3 bulan, 001 Crodpfx Aoyi Amwjnzjg

Kondisi: baru, Tahun pembuatan: 2026, nomor mesin/kendaraan: 2103 XXXXXX, The FPS 300M – Successor to the DECKEL FP1. Thanks to our many years of service experience, we have decided to develop and manufacture our own milling machines. The FPS 300M is a conventional milling machine, perfectly suited for both training and production environments. Control 3-axis – FPS Aktiv – Digital display Spindle Speed 40 – 2,000 rpm, geometrically graduated direct-drive transmission with 16 speed settings for maximum torque and milling performance Feed Rate 5 to 500 mm/min, steplessly adjustable Rapid Traverse 1.5 m/min Quill Extendable vertical quill, 60 mm, SK40 with M16 drawbar thread optional: with DECKEL saw thread S20 x 2 Travel (Axes) X/Y/Z: 300/160/340 mm Table Fixed angle table, 600 x 210 mm Standard Features • Vertical and horizontal spindle • Milling head can be manually swivelled +/- 90° Options • Z-axis bellows • Chip tray • Machine lamp • Central lubrication • Universal table • Rotary table • Slotting head Cjdoh I Nqwjpfx Anzsrg • Dividing attachment • Tailstock • etc. For further technical data, please refer to the attached data sheet.

Kondisi: baru, Tahun pembuatan: 2026, Completely overhauled, as-new condition machine, upgraded to the legally required safety standard 'state of the art' according to the Operational Safety Ordinance of the Employers' Liability Insurance Associations. Control Cabinet Electronics Installation of a new CE-compliant control cabinet in accordance with the latest legal requirements of the Employers’ Liability Insurance Associations BGVA 3 / DIN-EN 60204-1 new machine standard. Optionally, the entire machine can be supplied in CE version. A CE Declaration of Conformity is issued for the machine. With this, FPS Werkzeugmaschinen GmbH assumes the role of manufacturer. The machine thus meets the requirements of the OPERATIONAL SAFETY ORDINANCE (BetrSichV). The year of manufacture corresponds to the machine’s delivery date. EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 Control 3-axis - FPS Aktiv - digital display Csdpfx Anjh R S Tcezerg Spindle speed 50 - 2500 rpm, geometrically graded direct-drive gearbox with 18 speed stages for maximum torque/milling performance Feed 6.3 to 630 mm/min, continuously variable Rapid traverse 1.3 m/min Quill Extendable quill, vertical 60 mm SK40 with M16 drawbar thread (Optional: with DECKEL saw thread S20 x 2) Extendable quill, horizontal approx. 100 mm Axes X/Y/Z 500/400/400 mm Table Fixed angle table 800 x 460 mm Features • Vertical and horizontal spindle • Milling head manually swiveling +/- 90° Options • Z-axis way cover (bellows) • Chip tray • Machine lamp • Central lubrication • Universal table • Rotary table • Slotting head • Dividing attachment • Steady rest • etc.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1988, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 400 mm, kecepatan spindel (maks.): 2.500 rpm, kecepatan spindel (min.): 50 rpm, gores kuas bulu: 60 mm, tinggi total: 1.935 mm, panjang total: 2.000 mm, lebar total: 200 mm, kecepatan rotasi (maks.): 2.500 rpm, kecepatan rotasi (min.): 50 rpm, jenis arus masuk: tiga fasa, berat keseluruhan: 1.445 kg, panjang meja: 460 mm, berat benda kerja (maks.): 400 kg, beban meja: 400 kg, lebar meja: 800 mm, tahun perombakan terakhir: 2013, masa garansi: 6 bulan, 1 Crsdpfxeyitxqj Anzjg

Kondisi: baru, Tahun pembuatan: 2026, Completely overhauled, as-new machine, upgraded to the legally required current safety standard 'state of the art,' in accordance with the Operational Safety Ordinance of the Employers' Liability Insurance Association. Control Cabinet Electronics Installation of a new CE-compliant control cabinet according to the latest statutory requirements of the Employers' Liability Insurance Association: BGVA 3 / DIN-EN 60204-1, new machine standard. Optional: The entire machine can be supplied in CE configuration. A CE Declaration of Conformity will be issued for the machine, making FPS Werkzeugmaschinen GmbH the official manufacturer. This ensures compliance with the OPERATIONAL SAFETY ORDINANCE (BetrSichV). The machine's year of manufacture is thus equivalent to the delivery date. Standards complied with: EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 Control 3-axis FPS Active digital display Speed 25 - 2500 rpm, geometrically stepped direct gearbox with 18 speed settings for maximum torque / milling performance Crodpfx Anoh Sptnjzog Feed 5 to 500 mm/min, stepless adjustment Rapid Traverse 1.2 m/min Quill Extendable quill, vertical 100 mm, SK40 with M16 drawbar thread, optional: with DECKEL saw thread S20 x 2 Extendable quill, horizontal approx. 100 mm Travel X/Y/Z: 800/300/400 mm Table Fixed angle table 1000x440 mm, load capacity 2000 kg Equipment • Vertical and horizontal spindle • Milling head manually swivels +/- 90 ° Options • Z-axis bellows • Chip tray • Machine light • Central lubrication • Universal table • Rotary table • Slotting head • Dividing attachment • Counter-support • etc.

Kondisi: bekas, Tahun pembuatan: 1972, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1307-62, tinggi total: 1.600 mm, panjang total: 1.360 mm, lebar total: 610 mm, diameter roda gerinda: 175 mm, berat keseluruhan: 670 kg, panjang penggilingan: 500 mm, kecepatan spindle penggilingan: 4.350 rpm, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 225 mm, jarak gerak sumbu Z: 230 mm, daya motor spindle penggiling: 550 W, panjang meja: 800 mm, lebar meja: 165 mm, daya: 0,55 kW (0,75 hp), diameter cakram: 175 mm, Mesin pengasah alat semi-otomatis dengan penggerak meja variabel tanpa tingkat. Mesin telah diperiksa, motor pengasah telah diganti bantalan baru. Spindel pengasah tipe terbaru tanpa suara gangguan (dapat diperbaiki). Cjdpfxoytq Abo Anzerg Bellows lipat dalam kondisi baik, bellow melintang baru. Permukaan penjepit tidak rusak. Kelistrikan telah diperiksa. Data lainnya, lihat petunjuk penggunaan.

Kondisi: baru, jarak tempuh: 5 km, daya: 132 kW (179,47 hp), jenis bahan bakar: diesel, berat keseluruhan: 3.500 kg, warna: putih, tipe perpindahan gigi: mekanis, panjang ruang muatan: 4.800 mm, lebar ruang muat: 2.100 mm, Perlengkapan: ABS, filter jelaga, kunci sentral, pendingin udara, program stabilitas elektronik (ESP),

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 420 mm, jarak lintasan sumbu Y: 220 mm, jarak gerak sumbu Z: 380 mm, kecepatan spindel (maks.): 2.600 rpm, kecepatan spindel (min.): 65 rpm, gores kuas bulu: 100 mm, tinggi total: 1.800 mm, lebar total: 1.500 mm, panjang total: 1.200 mm, lebar meja: 390 mm, panjang meja: 840 mm, berat benda kerja (maks.): 200 kg, jarak meja ke pusat spindel: 470 mm, Perlengkapan: dokumentasi / manual, en-1 Crjdou Nytzjpfx Anzeg

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 480 mm, jarak gerak sumbu Z: 310 mm, kecepatan spindel (maks.): 2.000 rpm, kecepatan spindel (min.): 40 rpm, gores kuas bulu: 120 mm, tinggi total: 1.820 mm, lebar total: 1.780 mm, panjang total: 1.400 mm, lebar meja: 500 mm, panjang meja: 900 mm, berat benda kerja (maks.): 190 kg, jarak meja ke pusat spindel: 390 mm, Perlengkapan: dokumentasi / manual, en-GB-TT-001 Cjdpfx Aehu Rwfjnzjrg

Kondisi: bekas, Tahun pembuatan: 2023,

Kondisi: bekas, Tahun pembuatan: 2002, Grinding diameter: 450 mm Grinding length: 1,500 mm Centre height: 225 mm Control system: FAGOR EQUIPMENT -T1 500 mm grinding wheel diameter -T2 400 mm grinding wheel diameter -T6 internal grinding attachment -T7 internal grinding attachment -Spindle motor, water-cooled, 9.8 kW -Marposs tool measurement system -Active longitudinal positioning -Kel-Set -GAP monitoring on T1 and T2 by ELASO, contactless integration into the control interface -GAP monitoring on T3/T4 via fluid sensor -Semi-automatic balancing by ELASO, integrated into the control interface for T1/T2 -Tailstock: hydraulic, with fine adjustment +/- 150 µm -Dressing device on subtable, workpiece spindle side -Dressing device on subtable, tailstock side -Dressing device on table top -New service- and operator-friendly enclosure SPECIAL FEATURES: Workpiece spindle head with direct drive *strongly recommended for non-cylindrical grinding *Max. workpiece weight (overhung): 75 kg *Max. workpiece weight (between centers): 150 kg *water-cooled *MK5 combined with short taper mounting acc. to DIN 55026 *Oriented spindle stop *Fixed base B axis with direct drive, centre height 225 mm *Extremely torsion-resistant *High positioning accuracy *Resolution: ° *Water-cooled MECHANICAL REFURBISHMENT: -Complete machine overhauled according to Kellenberger measurement protocol -New paintwork Hydraulic unit new: -Improved temperature control (oil cooler) -Energy saving: only one pump, also not in continuous operation! -Pressure monitoring -Monitoring of water content in the hydrostatic oil (early detection of bellows damage) Csdpfsuxfu Njx Anzorg Hydrostatic screw drive in X-axis -Wear-free, as there is no contact in operation -No loss of accuracy, even in long-term operation at full load at maximum speed -Friction-free at low speeds -No reversal jump in frictional force when changing direction -Transmits the smallest rotational movements -No stick-slip effect even at low speeds -No fluctuations in frictional torque due to ball circulation -Higher axial rigidity compared to ball screw drives -Significantly better damping, resulting in improved workpiece surface finish and tool service life -No vibrations due to ball circulation -Suitable for high speeds and accelerations -Cost-effective alternative to linear motors with higher accuracy and significantly lower heat generation -Significantly lower power loss, preventing issues with chips on permanent magnets -Much lower cooling requirements than linear motors ELECTRICAL REFURBISHMENT: -New, modern CNC CYLINDRICAL GRINDER control system with BEMA cylindrical grinding user interface -Newly built electrical cabinet -New drive technology -Replacement of all electrical wiring Pressure switches, etc. -New absolute optical scales on X and Z axes -New absolute rotary encoder (for B-axis) Control System: The grinding software consists of a base license and various options, which are available depending on the machine’s configuration. Software base: - External and internal oscillating grinding - External and internal plunge grinding - External and internal face oscillating grinding - External and internal face plunge grinding - External and internal taper oscillating grinding - External and internal radius grinding (radius dressed on wheel) - Semi-automatic oscillating grinding - Workpiece...

Tahun pembuatan: 2015, Kondisi: bekas, Workpiece diameter: 300 mm Workpiece weight: 999 kg Workpiece height: 145 mm Equipment: - Digital display for vertical axis - Automatic infeed - Programmable automatic end shut-off - Grinding spindle drive with infinitely variable electronic speed control - Infinitely variable cross-feed and table rotation - 24V magnetic chuck, 300 mm - Various safety devices, e.g. safety hood monitoring, operating status indication via signal light - Lubrication oil level monitoring - The machine was completely overhauled in 2015, including replacement of all electrical systems to PLC control and 24V control voltage - Paper band filter system, specifically adapted for this machine The following works have now also been carried out: - Replacement of bellows and belts - Grinding spindle newly mounted - Grinding carriage bed and rotary table bed hand-scraped to restore improved and more precise running characteristics - Grinding carriage and cross table lifted off machine body, all guideways cleaned, lubrication checked - Various wear parts, such as rubber caps and switch elements replaced - Thorough functional inspection - Infeed arm modernization - Paintwork touch-ups, machine colour: light grey RAL 7035 and RAL 7012 Crjdpfxjxflcle Anzjg

Kondisi: baru, We supply all spare and wear parts for the JUNG JF and HF series, such as grinding wheel flanges, switches, bellows, splash guards, replacement grinding spindles, cross spindles, piston rods, etc. In addition, we offer accessories like magnetic clamping plates (new or refurbished), dressers, paper band filters, slideway oil, lubrication pumps, and more. Crodpfx Aegbt U Nonzsg We also supply used parts that are no longer available new from the manufacturer. For inquiries, please specify the exact designation of the required part.

Kondisi: bekas, Tahun pembuatan: 2020, Fungsionalitas: fungsi terbatas, berat keseluruhan: 150 kg, We offer the Grundfos electronically controlled dry-running pump. ⭐︎ Condition: Good (used) The electronically controlled dry-running pump is used but ready for operation. The pump worked flawlessly up until removal a few weeks ago. Manufacturer: Grundfos Type: TPE 100-250/2-S A-F-A-BAQE-ND1 Description: Single-stage inline pumps with variable-speed MGE motor Frequency converter: integrated Pump speed: 2930 rpm Rated flow rate: 135 m³/h Rated head: 20.1 m Mechanical seal: BAQE Pump housing: cast iron Impeller: cast iron Gross weight: 157 kg Codoyc T Apspfx Anzjrg For further data, please refer to the nameplate. Scope of delivery as shown in the pictures. Inspection before purchase is possible and expressly encouraged. 2 units available. Price: Per unit #Shelf 21-1-9 Shipping is possible but the buyer pays the shipping costs. Single-stage volute pump with opposed suction and discharge nozzles in inline design. The suction and discharge nozzles have the same diameter. The pumps are built according to the top-pull-out principle, i.e., the pump head (motor, head piece, and impeller) can be easily removed for maintenance or servicing while the pump housing remains in the pipeline. The pump is equipped with an unbalanced rubber bellows shaft seal. The mechanical seal complies with EN 12756. Pipe connection via DIN flanges PN 16 according to EN 1092-2 and ISO 7005-2. The pump is fitted with a fan-cooled permanent magnet synchronous motor. The motor efficiency corresponds to IE5 energy efficiency class according to IEC 60034-30-2. For speed control, the motor is equipped with a frequency converter and PI controller housed in the motor terminal box. The electronic speed control enables continuous adjustment of the motor speed and thus pump performance according to current demand. The pump is equipped with a differential pressure sensor.

Kondisi: baru, Tahun pembuatan: 2026, tinggi pembubutan: 3.000 mm, berat benda kerja (maks.): 50.000 kg, diameter pembubutan: 4.200 mm, panjang pemakanan sumbu X: 4.700 mm, panjang umpan sumbu Z: 2.000 mm, diameter pelat muka: 4.000 mm, kecepatan pemakanan sumbu X: 25 m/menit, laju pemakanan sumbu Z: 15 m/menit, diameter meja putar: 4.000 mm, kecepatan rotasi (maks.): 100 rpm, torsi: 128.000 Nm, kecepatan spindel (min.): 3.000 rpm, beban meja: 50.000 kg, daya: 100 kW (135,96 hp), Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, en-001 Crodpfsq Ny Dtjx Anzog

Kondisi: bekas, Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, 1 Universal testing machine type H 10 KM Used device with Windows 11 software for tension, compression, bending, 1 pair of wedge grips up to 10 kN, and a certificate for tension/compression displacement measurement. Suitable for tension, compression, shearing, bending, etc. • This is a double-spindle benchtop model. • The machine complies with DIN 51220 and 51221, Class 1. • Digital display for force and displacement, 4½ digits, with peak value memory. • 5-stage range selection for force and displacement. • Digitally adjustable speed from 0.5 to 1000 mm/min in steps of 0.1 mm. • Break detector and automatic return are also standard features. • Drive via precision servo motor with high-frequency chopper control unit and digital feedback for constant, load-independent speed. • Low-noise operation due to toothed belt drive, recirculating ball screws with bellows cover. • Fully computer-controllable via RS 232 interface. Max. load: 10 kN in tension and compression Max. stroke: 1150 mm without grips Force measurement: Strain gauge Measuring principle: Temperature-compensated Codjxghlfopfx Anzerg Displacement measurement: Integrated optical encoder, resolution 0.01 mm Connection: 220-250 volts, 50-60 Hz Power consumption: 1.0 kW Dimensions: Height 1575 mm, width 635 mm Clear frame width: 410 mm Weight: approx. 95 kg Including 10 kN load cell and certificate for force and displacement measurement.

Tahun pembuatan: 2024, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: CO2-1125-5000, nl-hu-7186291 Crsdpfx Anexfvahjzeg