Beli Berg Und Schmid bekas (129)

Kondisi: baru, en-GB: Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangular 350x200 mm Saw band length 3375x27x0.9 mm Band speed 37 + 74 m/min Table height 940 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m Hodpfod Iipxsx Akgofn SPECIAL OFFER PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height sensor - Ball-bearing rotary table - Hydraulic vice, laterally adjustable - Heavy-duty, large material support - Automatic coolant system

Kondisi: baru, Cutting diameter 220 mm Bandsaw blade length 2455 mm Table height 850 mm Cutting width 230 mm Cutting speed 35 + 70 m/min Bandsaw blade dimensions 2455 x 27 x 0.9 mm Cutting capacity at 60° round 90 mm Cutting capacity at 60° square 90 mm Cutting capacity at 60° flat 90 x 100 mm Cutting capacity at 45° round 150 mm Cutting capacity at 45° square 150 mm Cutting capacity at 45° rectangular 150 x 210 mm Cutting capacity at 90° round 220 mm Cutting capacity at 90° square 210 mm Cutting capacity at 90° rectangular 230 x 185 mm Total power requirement 1.2 kW Machine weight approx. 0.24 t Space required approx. 1.2 x 0.6 x 1.7 m SPECIAL OFFER PRICE!!! -Mitre cuts up to 60° to the left -Cutting speed 35 / 70 m/min -Vice with quick-release device -Carbide saw band guides -Band tension control -Electric cooling system Auto-Cut System = 3-stage system Hjdpfxsd Iip Us Akgsfn -Automatic saw frame lowering via hydraulic cylinder -Continuously adjustable feed -With limit switch -Fast lowering of the saw frame from rest position to the workpiece, then switch to normal feed rate -Manual operation possible Freight cost share: €85

Kondisi: baru, Cutting capacity at 90 degrees: round 250 mm Cutting capacity at 90 degrees: square 210 mm Cutting capacity at 90 degrees: rectangular 290 x 210 mm Saw blade length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 25 - 90 m/min Total power requirement: 1.1 / 1.3 kW Machine weight: approx. 0.35 t Space required: approx. 1.3 x 0.8 x 1.5 m SPECIAL PROMOTION PRICE!!! (20347) Double mitre metal bandsaw with: Hedpfx Aksfgyh Rjgefn - Blade speed 25 - 90 m/min - Mitre cuts up to 60° left and 45° right - Ball-bearing turntable for quick mitre adjustment - Movable quick-release vice - Quick release lever - Automatic coolant system

Kondisi: baru, Dimensi luar (lebar x tinggi): 80 x 80 mm Hodsy N S Irjpfx Akgofn Panjang total: 6050 mm dibagi menjadi: 2x25/30/35/40/45/50/3x100/11x500 mm beban yang diizinkan: 200 t/m Bahan: 42CrMo4, dikeraskan (plasma nitrided secara mendalam: kekerasan sekitar 700 HV, 58-63 HRC, kedalaman 0,4-0,5 mm), diasah

Kondisi: baru, de-hu-01 Hfedod Iin Sepfx Akgen

Kondisi: baru, Cutting capacity at 90°: round 250 mm Cutting capacity at 90°: square 210 mm Cutting capacity at 90°: rectangular 290 x 210 mm Saw band length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 35 + 70 m/min Total connected load: 1.1 / 1.3 kW Machine weight approx. 0.35 t Space requirement approx. 1.3 x 0.8 x 1.5 m SPECIAL OFFER PRICE!!! Hfjdpfx Asd Iip Nekgjn Double mitre metal band saw featuring: - Blade speed 35 + 70 m/min - Mitre cuts up to 60° left and 45° right - Ball-bearing mounted rotary table for quick mitre adjustment - Quick-release vice, movable - Quick-action clamping lever - Automatic coolant system

Kondisi: baru, Saw blade diameter: 250 mm Cutting capacity at 90°: round 85 mm Cutting capacity at 90°: square 75 mm Cutting capacity at 90°: flat 100x65 mm Cutting capacity at 45°: round 80 mm Cutting capacity at 45°: square 75 mm Hedpfxed Iipcs Akgefn Cutting capacity at 60°: flat 90x60 mm Total power requirement: 0.8 kW Machine weight: approx. 0.04 t SPECIAL PROMOTIONAL PRICE!!! Assembly saw with extensive standard equipment and large cutting range · For mitre cuts to the left up to 45° · Suitable for cutting steel, stainless steel, and, to a limited extent, aluminium profiles · Automatic cooling directly on the saw blade · 24 V safety switch integrated in the handle with restart protection · 38 kg total weight = easy to transport · Length stop, assembly tools included Optional accessories: Saw blade: EUR 57 Machine base type 20505: EUR 192

Kondisi: baru, Cutting diameter 240 mm Saw band dimensions 2730 x 27 x 0.9 mm Table height 920 mm Cutting speed 35 + 70 m/min Cutting capacity at 90° round 240 mm Cutting capacity at 90° square 230 mm Cutting capacity at 90° rectangle 270 x 230 mm Cutting capacity at 45° round 210 mm Cutting capacity at 45° square 200 mm Cutting capacity at 45° rectangle 200 x 210 mm Cutting capacity at 60° round 130 mm Cutting capacity at 60° square 130 mm Cutting capacity at 60° flat 130 x 160 mm Total power requirement 1.2 kW Hfjdped Iip Sefx Akgen Machine weight approx. 0.26 t Required space approx. 0.9 x 1.6 x 1.74 m • Miter cut left 60° • Quick-release vice with quick-release mechanism • Quick-release lever for easy handling • Frame and gearbox made from a single casting, ensuring very quiet operation and minimal vibration • Electronic monitoring of blade tension and blade breakage, with saw blade cover • Carbide saw band guides • Large machine bed • Machine base (supplied disassembled) with automatic cooling system The AutoCut system consists of: Hydraulic cylinder, feed control, spring package, limit switch Automatic lowering of the saw frame via the hydraulic cylinder, infinitely variable feed adjustment, with limit switch at the end of the cut. Rapid lowering of the saw frame from home position to the workpiece, then switching to normal feed rate (e.g., for scribing). Manual operation: The hydraulic cylinder acts as a brake cylinder (e.g., for notching). Using the brake cylinder, the saw can be positioned at any point during the return stroke.

Kondisi: baru, Pressure 1.5 kN Stroke 40 mm Throat depth 70 mm Working height from 75 to 170 mm Table surface 115 x 70 mm Hfedpfxofv Av De Akgjn Machine weight approx. 11 kg Dimensions (L x W x H) 115 x 175 x 290 mm Rack and Pinion Hand Press HZ 150 Force transmission is achieved via a rack-and-pinion mechanism. This press is used where a constant pressure is required during operation. Manufactured with precision, spindle hardened and ground, unlimited service life Long spindle guidance ensures optimal pressing performance Central T-slot milled to DIN 650, T-slot nuts fit precisely.

Kondisi: baru, Pressure 17.0 kN Stroke 60 mm Throat depth 105 mm Working height from 75 to 180 mm Table size 170 x 130 mm Spindle diameter 25 mm Machine weight approx. 35 kg Dimensions (L x W x H) 260 x 130 x 415 mm Toggle Lever Hand Presses SPECIAL PRICE!!! HK 1700 Stroke 60 mm with crank and fine adjustment of working height Stand height 450 mm Hedpfofv Avnjx Akgofn Achieve even greater pressing force in production without additional effort. Maximum pressing power at the end of the stroke thanks to toggle lever technology. Especially robust construction of spindle head and stand.

Kondisi: baru, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 950 mm Blade speed: 18 - 110 m/min Total power requirement: 1.5 kW Machine weight: approx. 0.42 t Space requirement: approx. 1.23 x 1.7 x 1.75 m SPECIAL PRICE!!! Double mitre metal bandsaw, frequency inverter, hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre cuts left 60° and right 45° • Material height sensor (automatic cut start detection) Hjdpfjfgyh Ujx Akgefn • Frame and gearbox cast in one piece, very quiet and low-vibration cutting • Hydraulically operated, laterally adjustable vice • Guided, high-quality industrial bearings • Heavy-duty vice and machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Adjustable feed pressure regulator • Support roller (entry side) • Ball-bearing turntable Semi-automatic operation: 1. Clamp the material 2. Start the saw 3. Rapid downfeed to the workpiece or direct cutting in case of series cuts 4. Saw blade stops 5. Raise frame just above the material 6. Open vice

Kondisi: baru, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw blade length: 9300 x 67 x 1.1 mm Table height: 790 mm Blade speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx. 8.45 t Dimensions L x W x H: 4.485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer premium sawing technology and top performance for cutting special steels. • The welded machine frame and steel saw frame meet all cutting requirements and eliminate vibration and noise. • The chip conveyor is hydraulically driven with adjustable speed. • All machine movements (saw frame, vice, feed, saw blade guides) utilize modern linear guides capable of high static and dynamic load capacity, ensuring minimal sliding friction. • Another key feature is the roller system for material positioning, hydraulically driven. These rollers move at a right angle to the material, allowing optimal clamping. • Thanks to adjustable blade height control, the operator can precisely position the band near the top edge of the material. After cutting, the blade automatically returns to its previous position. Alternatively, the ‘remain’ function can be selected to leave the blade at the lower position. During the cutting cycle, the software compares sawing load with preset values to allow the system to stop in case of irregularities. • The saw blade is cleaned by two adjustable steel brushes with hydraulic drive. • The hydraulic unit with filter and pressure gauge ensures particularly smooth operation at a constant pressure. • Precision-ground carbide inserts for saw blade clamping, complete with hardened, adjustable lateral guide rollers. The adjustable blade guide automatically moves as close as possible to the material. • The saw blade is tensioned by a hydraulic cylinder, controlled by machine software. Tension is automatically released after a preset time in idle mode or after a cutting cycle. • Automatic version with CNC control available for X-TECH 900 / 1200 models, with 500 mm feed length for high-production series. Hfodpefg E Hpofx Akgsn • The material is supported by a table with seven rollers. These are driven by a hydraulic orbital motor, ensuring precise placement even at maximum load. • All guided movements run on four recirculating ball guides with high capacity for static and dynamic loads; significantly reduced feed friction. Induction-hardened, ground prismatic guides. Price on request.

Kondisi: baru, Pressure: 4.5 kN Stroke: 40 mm Throat depth: 95 mm Working height: from 95 to 240 mm Table size: 160 x 110 mm Spindle diameter: 25 mm Machine weight: approx. 24 kg Dimensions (L x W x H): 160 x 230 mm Direct-acting pneumatic presses provide full pressing force over the entire stroke length. They are especially used when long-stroke parts need to be processed with constant force. Convincing technology • Long and precise spindle guidance for maximum dimensional accuracy • Hardened and ground piston rod for virtually unlimited service life • Double-acting cylinder with end-position cushioning on both sides • Double guide rings in the piston ensure consistent and smooth operation • Oil-resistant sealing elements Special features of the PND series • Spindle secured against rotation • Spindle return in the PND 85/S only via a single cylinder chamber—additional air savings • Working height fine adjustment is straightforward, fast, and precise in 2 stages: – Basic setting by simply loosening the clamping screws on the column Hodpjfv Av Sefx Akgofn – Precision fine adjustment via the stroke limit ring on the piston rod Additional advantage: Faster cycle times and air savings

Kondisi: baru, Cutting diameter: 255 mm Saw blade length: 2765 x 0.9 x 27 mm Cutting width: 300 x 180 mm Speed: 35 + 70 rpm Total connected load: 1.8 kW Machine weight approx.: 450 kg Space requirement approx.: 1.7 x 1.23 x 1.75 m SPECIAL OFFER PRICE!!! Double mitre metal band saw, frequency-controlled hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre left 60° / right 45° • Material height sensor (automatic cut start detection) • Frame and gearbox cast as a single unit, ensures extremely quiet and low-vibration operation • Hydraulic vice, laterally adjustable • Precision industrial bearings • Robust vice and machine frame, heavy-duty cast construction • Large machine base • Integrated tool compartment and chip drawer in machine substructure • Cutting monitoring via ammeter • Adjustable feed regulator for cutting pressure • Infeed roller • Ball bearing rotary table Semi-automatic operation: Hfodpfxofn Ands Akgsn 1. Clamp material 2. Start saw 3. Rapid feed down to material or cut straight away for series cutting 4. Switch off saw band 5. Raise frame to just above material 6. Open vice

Kondisi: baru, Cutting range at 90 degrees: round 510 mm Cutting range at 90 degrees: square 480 mm Cutting range at 90 degrees: rectangular 610 x 450 mm Saw blade length: 5320 x 34 x 1.1 mm Blade speed: 15 - 100 m/min Table height: 820 mm Total power requirement: 3.0 kW Machine weight: approx. 2.3 t Space requirement: approx. 2.65 x 2.8 x 2.2 m For mitre cuts up to 45° to the left in fully automatic operation and up to 60° to the left in semi-automatic operation Material height sensor (automatic cut start detection) Automatic feed unit via ball screw with incremental feed and automatic length compensation Sensor on the saw blade for automatic adjustment of the sawing stroke Fully automatic control of saw frame and clamping device Hydraulic unit with automatic pressure shut-off in idle mode Mechanical chip removal brush, feed vice opens on both sides Minimum rest piece length: 100 mm Modern CNC control, freely programmable for multiple sawing jobs with various cutting lengths and quantities Hfodpfsfu Nbbox Akgjn Automatic feed unit 500 mm via ball screw with incremental feed and automatic length compensation. Adjustable for cut lengths from 25 to 9,999 mm Fully hydraulic control of saw frame and clamping devices Preselection of 3 different material feed speeds Visualization of the entire work process with simple data entry

Kondisi: baru, Pressure: 8.5 kN Stroke: 40 mm Throat depth: 95 mm Working height: from 95 to 240 mm Hedpfx Akefv Awajgofn Table size: 160 x 110 mm Spindle diameter: 25 mm Machine weight: approx. 27 kg Dimensions (L x W x H): 160 x 230 mm Direct-acting pneumatic presses deliver the full pressing force over the entire stroke length. They are primarily used when processing long-stroke parts with consistent force is required. Convincing technology: • Long and precise spindle guidance ensures maximum dimensional accuracy • Hardened and ground piston rod for virtually unlimited service life • Double-acting cylinders with end position cushioning on both sides • Double guide rings on the piston for smooth and consistent running • Oil-resistant sealing elements Special features of the PND series: • Spindle secured against twisting • For the PND 85/S, spindle return is effected via only one cylinder chamber—providing additional air savings • Working height fine adjustment is simple, quick and precise in 2 stages: – Basic adjustment by loosening the clamping screws on the stand – Precision fine adjustment via the stroke limit ring on the piston rod Additional advantage: Faster cycle times and air savings.

Kondisi: baru, Pressing force 26.0 kN Stroke 60 mm Throat depth 110 mm Working height from/to: 70 - 250 mm Hedsfv Avrepfx Akgjfn Table size 190 x 140 mm Spindle diameter 30 mm Machine weight approx. 46 kg Dimensions (L x W x H): 310 x 140 x 475 mm Toggle Presses – SPECIAL PRICE!!! HK 2600, stroke 60 mm, including fine adjustment of working height via bevel gear mechanism with convenient and easy side crank adjustment. Stand height: 475 mm Increased pressing force in production without extra effort. Maximum pressing force just before the end of the stroke thanks to toggle mechanism. Particularly robust construction of spindle head and stand.

Kondisi: baru, Pressing force: 34.0 kN Stroke: 40 mm Throat depth: 130 mm Working height: 80 - 240 mm Table size: 190 x 140 mm Spindle diameter: 30 mm Machine weight: approx. 80 kg Dimensions (L x W x H): 375 x 200 mm Toggle lever pneumatic presses including fine adjustment of working height via bevel gear and side hand crank, comfortable and easily adjustable. Hjdsfv Avyopfx Akgofn Toggle lever pneumatic presses are used when maximum press force is required shortly before the end of the stroke, e.g. for assembly, punching, embossing, riveting, etc.

Kondisi: baru, Pressure 2.5 kN Stroke 45 mm Throat depth 90 mm Working height from 80 to 220 mm Table surface 120 x 60 mm Machine weight approx. 22 kg Dimensions (L x W x H) 160 x 230 x 390 mm Rack and Pinion Hand Press HZ 250 The force is transmitted via a rack and pinion mechanism. It is used wherever a constant pressure is required during the working process. Hodpfx Akjfv Av Isgofn Precisely manufactured, spindle hardened and ground, unlimited service life Long spindle guide, optimal pressing performance, Centrally milled T-slot to DIN 650, T-slot nuts fit precisely.

Kondisi: baru, Pressure: 17.0 kN Stroke: 40 mm Throat depth: 110 mm Working height (min-max): 70 - 220 mm Table dimensions: 190 x 140 mm Spindle diameter: 30 mm Machine weight: approx. 60 kg Dimensions (L x W x H): 310 x 190 mm Toggle Lever Pneumatic Presses Including precise working height adjustment via bevel gear with side-mounted crank—easy and convenient to adjust. Toggle lever pneumatic presses are used whenever maximum pressing force is required shortly before the end of the stroke, e.g. for assembly, punching, embossing, riveting, etc. Hodpsfv Avvsfx Akgjfn

Kondisi: baik (bekas), Clamping table, angle plate, indexing fixture, dividing head, rotary table, milling machine table, angle plate with three-jaw chuck, angle plate with lathe chuck Hsdpfxjii E Tns Akgefn -Manufacturer: Schmid, rotary table with three-jaw chuck -Type: TWS200 -Chuck size: Ø 200 mm -Dimensions: 250/250/H365 mm -Weight: 52 kg

Kondisi: baru, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 1250x600 mm Cutting capacity at 45°: round 680 mm Cutting capacity at 45°: square 600 mm Cutting capacity at 45°: flat 870x600 mm Cutting capacity at 60°: round 580/550 mm Cutting capacity at 60°: square 530/450 mm Cutting capacity at 60°: flat 550x450 mm Bandsaw blade length 8140 x 54 x 1.6 mm Blade speed 15 - 90 m/min Table height 855 mm Total power requirement 7.5 kW Machine weight approx. 5.3 t Space requirement approx. 5.75 x 4.2 x 2.75 m 2-column double-mitre bandsaw for fast cutting with pusher system P15. Option P30. Hydraulic saw frame lowering Hfedpfx Akefg E Hnsgon • NC controlled • Automatic angle positioning from +60° to –60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved via the new "B&S positioning system". An intelligent NC control ensures smooth interaction between linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake, with large radial central positioning. The worktable is mounted with high-quality preloaded bearings, ensuring very smooth rotation. CNC control CNC control allows programming of up to 90 cutting programs with different cut lengths, batch sizes, and mitre angles. Double-sided clamping positioning system The B&S pusher, feed and positioning system, is equipped with "double-sided opening grippers" operated hydraulically. This ensures secure gripping and transport of materials and bundles that may differ from the ideal shape. The pusher system is separate and runs on ball-bearing linear guides, precision-ground rack, and is driven by a frequency-controlled, robust geared motor.

Kondisi: baru, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 820 x 610 mm Cutting capacity at 45°: round 550 mm Cutting capacity at 45°: square 550 mm Cutting capacity at 45°: flat 550 x 600 mm Cutting capacity at 60°: round 370 mm Cutting capacity at 60°: square 370 mm Cutting capacity at 60°: flat 370 x 600/450 mm Saw blade length 7260 x 41 x 1.3 mm Blade speed 15 - 100 m/min Table height 800 mm Total power requirement 5.5 kW Machine weight approx. 4.8 t Space requirement approx. 5.85 x 3.7 x 2.7 m 2-column double miter bandsaw for fast cutting with pusher system P15, option P30 Hydraulic saw frame lowering Hodpfxsfg E Hmo Akgsfn • NC-controlled • Automatic angle positioning from +60° to –60° High-quality automatic miter adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved via the new "B&S positioning system". An intelligent NC control ensures smooth interaction between linear encoder and self-braking positioning motor in combination with a reliable hydraulic brake with large radial center positioning. The work table is mounted on high-quality preloaded bearings which ensure very smooth rotation. CNC control A CNC control system allows programming of up to 90 cutting programs with different cut lengths, quantities, and miters. Double-sided clamping positioning system The B&S pusher system, feeding and positioning unit, features "double-sided opening grippers" which are hydraulically operated. This guarantees secure gripping and transporting of materials and bundles that may deviate from the ideal shape. The pusher system is built as a separate unit and runs on ball-bearing linear guides, a ground rack, and is powered by a frequency-controlled, robust geared motor.

Kondisi: baru, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangular 450 x 320 mm Saw band length 4250 x 34 x 1.1 mm Band speed 40 + 80 m/min Table height 845 mm Saw band width 34 mm Total power requirement 2.2 kW Machine weight approx. 0.985 t Space requirement approx. 1.4 x 2.0 x 2.2 m Double mitre bandsaw, hydraulic semi-automatic, DGS 350/450 HA-I · Mitres left + right 60° without machine conversion · 34 mm saw band width · Large, ball-bearing turntable work support · Saw band guides positioned via extra wide linear guides Hjdpfxefgyico Akgefn · Powerful, robust gearbox · Large-area clamping plates · Infeed and outfeed roller · Removable chip tray (for cleaning/disinfection) · Freestanding control panel, safe and ergonomic · Storage space for bands and consumables · Cutting pressure regulator, feed regulator · Fully hydraulic vise · Super fast clamping (front loading) · Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp the material 2. Start the saw 3. Rapid lowering to material start or, for serial cutting, begin cutting immediately 4. Switch off saw band 5. Raise saw frame just above material 6. Open vise Optimal, material-independent cutting results thanks to fine adjustment of the saw frame using: * Pressure control valve (cutting pressure force) * Feed control valve (speed) * Switch with pictograms, simple and clear to operate

Kondisi: baru, Cutting capacity at 90 degrees: round 680 mm Cutting capacity at 90 degrees: square 640 mm Cutting capacity at 90 degrees: rectangular 820 x 610 mm Saw band length: 5850 x 41 x 1.3 mm Band speed: 15 – 100 m/min Table height: 800 mm Total power requirement: 5.5 kW Machine weight approx. 4.45 t Space requirement approx. 5.85 x 3.6 x 2.7 m 2-column bandsaw for fast cutting, K-tech 800H with pusher system P 15. P 30 (optional) Hfjdpefgyifofx Akgen Fast, smooth, and ergonomic cutting Specially developed for cutting profiles and beams as well as solid material. Material clamping is carried out vertically on the feed and discharge sides. From the K-tech 800 H, the machine is equipped as standard with an additional horizontal vise. Hydraulic saw frame lowering, material positioning, and the pusher system are CNC-controlled in coordination. The machines are equipped as standard with the environmentally friendly "B&S Clean Cut cutting system" with minimum quantity lubrication. This reduces cleaning effort and conserves resources. CNC Control A CNC controller enables programming of up to 90 cutting programs with different cut lengths, quantities, and mitres. The B&S pusher system, feeding and positioning system, is equipped with "double-sided opening gripper jaws" which are hydraulically operated. This ensures secure gripping and handling of materials and bundles that deviate slightly from the ideal shape. The pusher system is built separately and runs on ball-bearing linear guides, ground rack, and is powered by a frequency-driven, robust gear motor.