Beli C Gestell Presse bekas (63.826)

Kondisi: bekas, Single-column Hydraulic Press with Drawing Cushion RÖCHER Type REP 100.01 SZ Hydraulic Drawing Press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with through-hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tonnes (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Drawing cushion force: 40 tonnes (400 kN) Redpfoyupuljx Amuju Drawing cushion stroke: 200 mm Drawing cushion surface: 530 x 530 mm Pressure dwell time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Hydraulic tank capacity: 700 liters Rapid approach speed: approx. 400 mm/sec Pressing speed up to 23.8 tonnes (238 kN): 5 to 68 mm/sec Pressing speed up to 100 tonnes (1000 kN): 5 to 16 mm/sec Return speed: 50 to 400 mm/sec Main pump motor rating: 18.5 kW Auxiliary pump motor rating: 4 kW Electrical connection: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard, and mouse - Machine control via SIEMENS S7-300 PLC - Ram stroke and pressing force programmable via the control - Drawing cushion with drawing and ejection function - Drawing cushion force infinitely variable - Ram and drawing cushion equipped with direct position measuring system - Drawing cushion can be moved in and out of the press area for punching operations using the through-hole - Floor-mounted setup, drawing cushion does not extend below floor level - Pressure and position cut-off - Fixed stop with indirect measuring system - Pressure dwell time infinitely programmable - Table surface with bores for drawing cushion ram rods - Ram with ejector - Cutting stroke damping - Stroke release via two-hand operation, foot switch, manual lever, and pushbutton on control panel - LEUZE light curtain as reach-in protection for safety operation - Front mirror columns at the press table laterally movable - Electrical switch cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil/air cooling) - Manual central lubrication pump - 2x hose lines for tool temperature control or cooling on the ram - Piece counter in the control system - 306 recorded operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space required for press L x W x H: 3100 x 1800 x 4160 mm Weight: approx. 13 tonnes Very good, as-new condition

Kondisi: bekas, Single-column hydraulic press MAE type S63SZ SO . 551277 Year of manufacture: approx. 1977 Nominal pressing force: 63 tons Pressing force: 50 tons (practically tested) Throat depth: 320 mm Table dimensions: 850 x 630 mm Ram area: 1050 x 500 mm Ram stroke: 500 mm Max. installation height: approx. 730 mm Table height above floor: 970 mm Hydraulic tank capacity: 600 liters Drive power: 15 kW Rjdpfxjdzp Trs Amueu Power supply: 380 Volt, 50 Hz - Hydraulic draw cushion under the table with bores through the table plate - Two-hand operation - Electrical control cabinet damaged Required space (L x W x H): 2000 x 1200 x 3420 mm Weight: approx. 5 tons The machine is functional; however, the control cabinet is mechanically damaged. During the test run, the machine achieves a pressing force of 50 tons, possibly due to a pressure relief valve discharging.

Kondisi: bekas, Single Column Toggle Press MAY - MAYPRES - KOMATSU Type MKN 1-63/6 Redpfjv Uraajx Amuou Eccentric Toggle Press, Eccentric Press Year of construction approx. 1984 Pressing force: 60 tons Throat depth: 160 mm Table size: 580 x 360 mm Ram area: Ø 270 mm Clamping pin bore: Ø 40 mm Distance between uprights: 218 mm Ram stroke: 60 mm Ejector stroke: 15 mm Ram adjustment: 30 mm Max. installation height: 300 mm (with intermediate bolster) Strokes per minute: 70 spm Motor speed: 1400 rpm Motor power: 3 kW Power supply: 380 Volt, 50 Hz - Pneumatic clutch and mechanical brake with pneumatic release (separate clutch-brake combination) - Intermediate bolster L x W x H 580 x 360 x 58 mm, with holes and cutouts - Mechanical ejector, ejection mechanism integrated in the machine table, Ø 80 mm - Electric two-hand control and foot switch - Movable safety guard, UNIDOR safety enclosure with pneumatic front shield - Cam switching unit BALLUFF Required space L x W x H: 1400 x 1200 x 1850 mm Weight: 3 tons In good condition

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, gaya penekanan: 250 t, panjang langkah: 180 mm, lebar meja: 780 mm, panjang meja: 1.200 mm, panjang pelat penekan: 1.200 mm, tahun perombakan terakhir: 2026, 250 ton Ukuran pelat 1200 x 780 mm Stroke 20-180 Jarak antar pelat (perkiraan): 650 mm 38 putaran per menit Bodi baja Redpfsy T H Inox Amuju ASAL: TURKI WAKTU REVISI: 05/2026 MESIN TELAH DIREVISI SECARA PENUH DI PABRIK KAMI.

Kondisi: baru, Tahun pembuatan: 2022, gaya penekanan: 15 t, C-frame Press – Manufacturer Hidrobrasil – 15 t C-Frame Press – Table 400 × 400 mm For sale is a hydraulic C-frame press from Hidrobrasil with a pressing force of up to 15 t. This machine is designed for continuous multi-shift operation and is ideally suited for assembly, pressing, and light forming work in workshops and production environments. ===== Technical Data + Information: Hydraulic C-Frame Press – 15 t ==== General Details - Manufacturer: Hidrobrasil - Model: C-frame press - Design: C-frame single-column press - Pressing force: max. 15 t (150 kN) - Adjustable pressure range: 5 – 17 t - Machine weight: approx. 1.1 t - Dimensions (L × W × H): approx. 1,150 × 800 × 1,900 mm - Table height: 850 mm - Operating sides: 1 ==== Working Area - Max. opening width: 400 mm - Stroke: 350 mm ==== Table & Ram - Table plate: 400 × 400 mm - Ram plate: 200 × 200 mm - Features: with T-slots and central cylinder clamping ==== Speeds - Forward travel speed: 10 mm/s - Return speed: up to 25 mm/s - Pressing speed: 0 – 10 mm/s ==== Hydraulics - Number of cylinders: 1 - Max. operating pressure: 290 bar - Pressure accuracy: ± 5 bar - Pump: gear pump, approx. 9 l/min - Oil volume: approx. 80 l (HLP 46) Redpfjitylgox Amueu - Oil temperature: max. 55 °C - Ambient temperature: max. 40 °C ==== Drive & Electrical - Motor power: 3 kW - Total connected load: approx. 5 kW - Main power: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz ==== Equipment & Operation - Pressure adjustment via rotary regulator - Manual lever control with two speeds - Oil temperature indicator - Control cabinet connection: 3,000 mm cable with 16 A plug - Machine body powder-coated / double painted ==== Control Cabinet - Protection class: IP54 - Reserve space: approx. 20% - Cooling: no - Internal lighting: no - Mode selector switch: lockable ==== Construction & Safety - Oil-hydraulic single-column design - Compliant with current UVV and EU directives ===== Assembly work, pressing operations, small batch production, workshop applications, light forming technology C-frame press, single-column press, hydraulic press, workshop press, assembly press, industrial press, die-matching press, tryout press, tool try out press Looking for a hydraulic press specifically tailored to your application? Contact us for a customized quote. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety requirements. Furthermore, our presses exceed Canadian and European safety standards by fully complying with Brazil’s national safety guideline NR 12, which builds upon these standards. Our core strength is special-purpose machine construction and press automation. We supply custom-built hydraulic presses at surprisingly affordable prices. For the hydraulic system, we predominantly use components from leading European manufacturers.

Kondisi: baru, Tahun pembuatan: 2022, gaya penekanan: 100 t, Hydraulic C-Frame Press – Manufacturer: Hidrobrasil – 100 t – Table Ø 1050 mm For sale is a high-performance hydraulic C-frame press manufactured by Hidrobrasil, featuring a pressing force of 100 t. Designed for industrial applications, this machine offers optimal conditions for demanding forming, assembly, and production processes due to its high operating speed and robust construction. ==== Technical Specifications + Information: Hydraulic C-Frame Press – 100 t ==== General Information - Manufacturer: Hidrobrasil - Model: C-Frame Press - Design: C-frame construction - Pressing force: 100 t - Machine weight: approx. 3,500 kg - Dimensions (W × D × H): approx. 1,354 × 2,005 × 2,595 mm ==== Working Area - Daylight opening: 350 mm - Stroke: 300 mm ==== Table & Ram - Table diameter: Ø 1,050 mm ==== Speeds - Approach speed: 250 mm/s - Pressing speed: 3 – 15 mm/s - Return speed: 150 mm/s ==== Hydraulics - Number of cylinders: 2 - Cylinder diameter: Ø 250.97 mm - Piston diameter: Ø 41.76 mm - Max. operating pressure: 210 bar - Return force: 10 t - Additional ejector force: 5 t - Additional stroke: 150 mm ==== Hydraulic Power Unit - Pump capacity: 44.5 l/min - Pump displacement: 27.59 cm³/rev - Motor power: 14.24 kW - Motor speed: 1,500 rpm - Oil tank capacity: 350 l ===== Assembly work, metal forming, serial production, heavy-duty applications, toolmaking, industrial press operations Rsdpfjhmi T Ujx Amuju C-Frame Press, Hydraulic Press, Industrial Press, Production Press, Heavy-Duty Press, Tryout Press, Tool Try-Out Press Are you looking for a hydraulic press tailored to your application requirements? Contact us for an individual offer. Our hydraulic presses are manufactured in compliance with German machinery directives, European machinery directives (Directive 2006/42/EC), EC standards, and EU safety requirements. Furthermore, our presses exceed Canadian and European safety standards, as they comply in every respect with the Brazilian national safety directive NR 12, which builds upon these. Our core expertise lies in special-purpose machine engineering and press automation. We supply custom-designed hydraulic presses at surprisingly affordable prices. We use primarily components from leading European manufacturers for our hydraulic assemblies.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, tegangan masuk: 400 V, Hydraulic C-Frame Press Our hydraulic C-frame press is a professional-grade machine designed for precise and demanding processing tasks. Thanks to its C-frame construction, it offers easy access to the working area, allowing larger workpieces to be processed and materials to be conveniently handled from multiple sides. Redpfoyr Ek Rox Amusu Key Features - High pressing force – ideal for bending, straightening, pressing-in, and assembly of components. - C-frame design – enhanced ergonomics and excellent access to the working area. - Robust steel frame – ensures durability and safe operation. - Precise hydraulic control – stepless adjustment of force and working speed. - Suitable for industrial and workshop use – perfect for both large-scale production facilities and smaller workshops. Thanks to its versatility and robust build, this press is suitable for a wide range of industries – from automotive and metalworking to technical service providers and tool workshops. Technical Specifications - Pressing force: 250 kN (approx. 25.5 t) - Max. pressure: 25 MPa - Max. opening: 500 mm - Stroke: 200 mm - Table dimensions: 500 × 400 mm - Throat depth: 200 mm - Descent speed: 10 mm/s - Return speed: 14 mm/s - Motor power: 3 kW

Kondisi: bekas, Tahun pembuatan: 2010, lebar total: 2.080 mm, tinggi total: 1.900 mm, panjang total: 2.440 mm, Brikettpresse_2010_Hoecker_Polytechnik Rsdpfjxqdxcjx Amueu

Kondisi: baru, Tahun pembuatan: 2026, nomor mesin/kendaraan: PRASA HYDRAULICZNA TYPU C HPW 50 50 TON, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, gaya penekanan: 51 t, panjang langkah: 200 mm, lebar meja: 400 mm, panjang meja: 500 mm, kecepatan penekanan: 18 mm/dtk, Hydraulic C-Frame Press Our hydraulic C-frame press is a professional machine designed for precise and demanding processing tasks. Thanks to its C-frame design, it offers easy access to the working area, making it possible to process larger workpieces and comfortably handle materials from various sides. Key Features Rodpjyr D R Njfx Amuju High pressing force – ideal for bending, straightening, pressing in, and assembling components. C-frame construction – improved ergonomics and excellent access to the working area. Robust steel frame – ensures durability and safe operation. Precise hydraulic control – stepless adjustment of force and working speed. Suitable for industrial and workshop use – ideal for both large manufacturing plants and smaller workshops. Thanks to its versatility and robust construction, this press is suitable for many industries – from the automotive sector and metalworking to technical service companies and tool workshops. Technical Specifications Pressing force: 500 kN (approx. 51 t) Maximum pressure: 25 MPa Maximum opening: 500 mm Stroke: 200 mm Table dimensions: 500 × 400 mm Throat depth: 200 mm Downstroke speed: 19 mm/s Return speed: 18 mm/s Motor power: 4 kW Delivery to the customer is possible. Delivery costs are calculated individually according to the offer from the transport company. If you are interested in more machines, please visit our website.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, tegangan masuk: 400 V, Hydraulic C-Frame Press Our hydraulic C-frame press is a professional machine designed for precise and demanding processing tasks. Its C-frame construction provides easy access to the working area, allowing the handling and machining of larger workpieces and the convenient loading and unloading of materials from multiple sides. Rodpsyrr Rksfx Amusu Key Features High pressing force – ideal for bending, straightening, pressing-in, and assembling components. C-frame design – improved ergonomics and excellent access to the working area. Rugged steel frame – ensures durability and safe operation. Precise hydraulic control – stepless adjustment of the force and working speed. Suitable for industry and workshops – ideal for both large-scale production facilities and smaller workshops. Thanks to its versatility and robust construction, this press is suited for multiple sectors – from the automotive industry and metalworking to technical service companies and toolmaking workshops. Technical Data Pressing force: 1000 kN (approx. 102 t) Maximum pressure: 25 MPa Maximum opening: 600 mm Stroke: 300 mm Table dimensions: 700 × 500 mm Throat depth: 250 mm Downward speed: 11 mm/s Return speed: 25 mm/s Motor power: 5.5 kW Delivery to customer available. Transport costs are individually calculated by the shipping company.

Kondisi: baru, Tahun pembuatan: 2026, daya: 15 kW (20,39 hp), gaya penekanan: 80 t, panjang langkah: 600 mm, lebar meja: 600 mm, panjang meja: 800 mm, kedalaman tenggorokan: 300 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, 80 Ton C-Frame Hydraulic Press – CHCP 80 – New / 24-Month Warranty Hydraulic presses are industrial machines that provide high force and precision in metal forming, drawing, cutting, and assembly processes. The CHCP 80 C-Frame Hydraulic Press, manufactured by CRONOSSTECH, offers reliable performance in medium and heavy-duty applications with its robust frame, high capacity, and precise operation capabilities. Key Advantages - Rigid, vibration-free steel construction frame - High precision (≤120 micron/meter) - PLC controlled, user-friendly system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Long service life, low maintenance costs Applications - Metal forming - Deep drawing and forming operations - Cutting and punching - Assembly and pressing - Automotive manufacturing and supplier industry Standard Features - Stress-relieved steel construction frame using vibration method - PLC control and touchscreen panel - Argon welding applications - Certified welding (EN ISO 15614-1 / 2017), WPQR & WPS approved - Parallelism and perpendicularity tolerances according to ISO & DIN standards (≤ 120 micron/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components Rsdpfx Aeyzb Dtsmuju - Automatic central lubrication system - Two-hand control system - Cooling system Technical Specifications – CHCP 80 - Press Force: 80 Ton - Stroke: 600 mm - Throat Depth: 300 mm - Table – Ram Distance: 700 mm - Table Size: 600 x 800 mm - Press Depth: 1200 mm - Press Width: 600 mm - Table Height from Floor: 900 mm - Overall Height: 2600 mm - Main Cylinder Diameter: Ø200 mm - Motor Power: 15 kW - Weight: 6500 kg General Information - Country of Manufacture: Turkey - Warranty: 24 months - Condition: New and unused This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2026, daya: 15 kW (20,39 hp), gaya penekanan: 100 t, panjang langkah: 600 mm, lebar meja: 650 mm, panjang meja: 850 mm, kedalaman tenggorokan: 300 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, 100 Ton C-Frame Hydraulic Press – CHCP 100 – New / 24-Month Warranty Hydraulic presses are industrial machines that provide high force and precision in metal forming, deep drawing, cutting, and assembly operations. The CRONOSSTECH-manufactured CHCP 100 C-Frame Hydraulic Press is designed for heavy-duty production applications, offering high tonnage capacity, a robust structural frame, and precise operational capability. Key Advantages - Rigid, vibration-free welded steel construction - High precision (≤120 microns/metre) - PLC-controlled, user-friendly system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Long service life and low maintenance costs Application Areas - Metal forming - Deep drawing and stamping operations - Cutting and punching - Assembly and pressing operations - Automotive industry and suppliers Standard Features - Welded steel frame stress-relieved by vibration method - PLC control and touchscreen panel - Argon welding applications - EN ISO 15614-1 / 2017 certified welding (WPQR & WPS approved) - Parallelism and perpendicularity tolerance to ISO & DIN standards (≤ 120 microns/metre) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Automatic central lubrication system - Dual-hand control system - Cooling system Technical Specifications – CHCP 100 - Press Capacity: 100 Ton - Stroke: 600 mm - Throat Depth: 300 mm - Table – Ram Distance: 700 mm - Table Size: 650 x 850 mm - Press Depth: 1300 mm - Press Width: 650 mm - Table Height from Floor: 900 mm Redpfx Ajyzb Dyomuju - Overall Height: 2700 mm - Main Cylinder Diameter: Ø220 mm - Motor Power: 15 kW - Weight: 8500 kg General Information - Production Location: Turkey - Warranty: 24 Months - Condition: New and unused This machine is manufactured in Turkey by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2026, daya: 5,5 kW (7,48 hp), gaya penekanan: 40 t, panjang langkah: 500 mm, lebar meja: 500 mm, panjang meja: 600 mm, kedalaman tenggorokan: 250 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, 40 Ton C-Frame Hydraulic Press – CHCP 40 – New / 24-Month Warranty Hydraulic presses are industrial machines that provide high force and precision in metal forming, deep drawing, cutting, and assembly operations. The CHCP 40 C-Frame Hydraulic Press, manufactured by CRONOSSTECH, offers reliable performance in both workshops and production lines with its compact design, robust frame, and precise operating capability. Key Advantages - Rigid, vibration-free frame structure - High precision (≤120 micron/meter) - PLC-controlled, user-friendly system - European standard hydraulic and electrical equipment - Long service life and low maintenance cost Applications - Metal forming - Deep drawing and flow forming operations - Cutting and punching operations - Assembly and pressing applications - Automotive and ancillary industries Standard Features - Stress-relieved steel construction frame via vibration method - PLC control and touch screen panel - Argon welding applications - EN ISO 15614-1 / 2017 certified welding (WPQR & WPS approved) - Parallelism and perpendicularity tolerances in accordance with ISO & DIN norms (≤ 120 micron/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical equipment - Automatic central lubrication system - Two-hand control system - Cooling system Technical Specifications – CHCP 40 Press Force: 40 Ton Stroke: 500 mm Throat Depth: 250 mm Redsyzb Dgepfx Amuju Table – Ram Distance: 600 mm Table Size: 500 x 600 mm Press Depth: 1050 mm Press Width: 500 mm Table Height from Floor: 850 mm Total Height: 2400 mm Main Cylinder Diameter: Ø145 mm Motor Power: 5.5 kW Weight: 4500 kg General Information Country of Manufacture: Turkey Warranty: 24 Months Condition: New and unused This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2026, daya: 22 kW (29,91 hp), gaya penekanan: 200 t, panjang langkah: 800 mm, lebar meja: 750 mm, panjang meja: 1.000 mm, kedalaman tenggorokan: 400 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, 200 Ton C-Frame Hydraulic Press – CHCP 200 – New / 24-Month Warranty Hydraulic presses are industrial machines that provide high force and precision for metal forming, deep drawing, cutting, and assembly operations. The CHCP 200 C-Frame Hydraulic Press, manufactured by CRONOSSTECH, is designed for demanding production environments with its high tonnage capacity, reinforced heavy-duty body structure, and superior performance. Key Advantages - Heavy-duty, high-strength steel frame construction Rodsyzb Edopfx Amusu - Stabilized operation with vibration-dampened structure - High precision (≤120 micron/meter) - PLC-controlled, user-friendly system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Long service life and low maintenance costs Areas of Application - Heavy-duty metal forming - Deep drawing and metal spinning operations - High-tonnage pressing with dies - Cutting and punching operations - Automotive, defense, and heavy industry Standard Features - Stress-relieved, welded steel frame construction via vibration method - PLC control and touch panel - Argon welding applications - Certified welding in accordance with EN ISO 15614-1 / 2017 (WPQR & WPS approved) - Parallelism and perpendicularity tolerances compliant with ISO & DIN standards (≤ 120 micron/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical equipment - Automatic central lubrication system - Two-hand control system - Cooling system Technical Specifications – CHCP 200 - Press Force: 200 Ton - Stroke: 800 mm - Throat Depth: 400 mm - Table – Ram Distance: 900 mm - Table Size: 750 x 1000 mm - Press Depth: 1500 mm - Press Width: 750 mm - Table Height from Floor: 1000 mm - Total Height: 2900 mm - Main Cylinder Diameter: Ø300 mm - Motor Power: 22 kW - Weight: 11,500 kg General Information - Place of Manufacture: Turkey - Warranty: 24 Months - Condition: New and unused This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2026, daya: 18,5 kW (25,15 hp), gaya penekanan: 150 t, panjang langkah: 700 mm, lebar meja: 700 mm, panjang meja: 1.000 mm, kedalaman tenggorokan: 350 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, 150 Ton C-Type Hydraulic Press – CHCP 150 – New / 24 Months Warranty Hydraulic presses are industrial machines that provide high force and precision for metal forming, deep drawing, cutting, and assembly operations. The CHCP 150 C-Type Hydraulic Press, manufactured by CRONOSSTECH, has been engineered for heavy-duty and continuous production applications, featuring a high tonnage capacity, reinforced frame structure, and precision performance. Key Advantages - High-strength, vibration-free steel frame construction - High precision (≤120 microns/meter) - PLC-controlled user-friendly system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Suitable design for heavy-duty operation - Long service life and low maintenance cost Application Areas - Heavy-duty metal forming - Deep drawing and forming operations - Mould pressing applications - Cutting and punching operations - Automotive and sub-industries Standard Features - Stress-relieved steel frame construction through vibration method - PLC control and touch panel - Argon welding applications - Certified welding per EN ISO 15614-1 / 2017 (WPQR & WPS approved) - Parallelism and squareness tolerance compliant with ISO & DIN standards (≤ 120 microns/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Automatic central lubrication system - Two-hand control system - Cooling system Technical Specifications – CHCP 150 - Press Force: 150 Ton - Stroke: 700 mm - Throat Depth: 350 mm - Table – Ram Distance: 800 mm - Table Size: 700 x 1000 mm - Press Depth: 1400 mm - Press Width: 700 mm - Table Height from Floor: 950 mm - Total Height: 2800 mm - Main Cylinder Diameter: Ø250 mm - Motor Power: 18.5 kW - Weight: 10,500 kg General Information - Place of Manufacture: Turkey - Warranty: 24 Months - Condition: New and unused This machine is manufactured by CRONOSSTECH in Turkey. Rsdpoyzb D Hjfx Amusu

Kondisi: baru, Tahun pembuatan: 2026, daya: 7,5 kW (10,20 hp), gaya penekanan: 60 t, panjang langkah: 500 mm, lebar meja: 600 mm, panjang meja: 800 mm, kedalaman tenggorokan: 250 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, 60 Ton C-Frame Hydraulic Press – CHCP 60 – New / 24-Month Warranty Hydraulic presses are industrial machines that provide high force and precision for metal forming, deep drawing, cutting, and assembly operations. The CHCP 60 C-Frame Hydraulic Press, manufactured by CRONOSSTECH, offers reliable and stable performance in both workshops and production lines thanks to its compact design, robust frame, and precise operating capability. Key Advantages - Rigid, vibration-free frame construction - High precision (≤120 micron/meter) - PLC-controlled, user-friendly system - Hydraulic and electrical components meet European standards - Long service life and low maintenance cost Rsdpoyzb Dmofx Amusu Applications - Metal forming - Deep drawing and forming processes - Cutting and punching operations - Assembly and pressing operations - Automotive and related industries Standard Features - Stress-relieved steel construction frame by vibration method - PLC control and touch panel - Argon welding applications - Certified welding (EN ISO 15614-1 / 2017, WPQR & WPS approved) - Parallelism and perpendicularity tolerances in accordance with ISO & DIN standards (≤ 120 micron/meter) - Hydraulic system by PARKER or REXROTH - Electrical components by SIEMENS / SCHNEIDER - Automatic central lubrication system - Dual-hand control system - Cooling system Technical Specifications – CHCP 60 - Pressing Force: 60 Ton - Stroke: 500 mm - Throat Depth: 250 mm - Table – Ram Distance: 600 mm - Table Size: 600 x 800 mm - Press Depth: 1150 mm - Press Width: 500 mm - Table Height from Floor: 850 mm - Total Height: 2500 mm - Main Cylinder Diameter: Ø175 mm - Motor Power: 7.5 kW - Weight: 5500 kg General Information - Country of Manufacture: Turkey - Warranty: 24 Months - Condition: Brand new, unused This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, daya: 5,5 kW (7,48 hp), gaya penekanan: 80 t, lebar meja: 660 mm, panjang meja: 860 mm, gaya punching: 80 t, lubang tembus di meja: 180 mm, penyesuaian langkah: 110 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Eccentric Press: This is a type of mechanical press powered by force generated through an eccentric mechanism used in cold forming operations such as punching, cutting, and die forming. Its high production speed and repeatability make it an efficient and reliable solution for mass production lines. CRONOSSTECH C-Type Eccentric Press 80 Ton is engineered for stable operation in cold forming applications. The rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance suitable for continuous production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance with central automatic lubrication - Production-ready operation with PLC control + dual-hand/foot pedal control Applications - Cold cutting and punching operations - Cold blanking applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-sided guided slide • Spheroidal graphite cast iron connecting rod and gear seats • Crankshaft and drive shafts made of 4140 quenched and tempered steel • Fully automatic central grease lubrication system • Pneumatic clutch and brake combination • CE safety compliant • Double coil safety valve • Manually adjustable stroke • Beam barrier finger and hand safety protection system • PLC control system • Dual hand/foot pedal control system • Mechanical locking system • Emergency reverse motor operation • Occupational safety compliant • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard on 150–300 ton models) • Hydraulic safety system (standard on 200–300 ton models) • Spare bolster plate • Coil decoiler, feeder, and straightener • One set of die to spec • Eight-sided slide guidance ✅ TECHNICAL SPECIFICATIONS (80 TON) Capacity: 80 Ton Throat depth: 280 mm Bed–ram distance: 400 mm Slide–bed clearance: 420 mm Distance between side frames: 400 mm Ram adjustment (stroke setting): 85 mm Approx. press width: 1400 mm Approx. press depth: 1735 mm Approx. press height: 2220 mm Front anchor dimension: 670 mm Side anchor dimension: 1040 mm Table hole diameter: Ø190 mm Table dimensions: 540×740 mm Die holding slot diameter: Ø40 mm Ram dimensions: 370×230 mm Table height from floor: 755 mm Stroke adjustment: 10–100 mm Strokes per minute: 45–75 spm Motor power: 7.5 kW Motor speed: 1450 rpm Approx. weight: 4000 kg Note: Please contact us if you require changes in technical specifications. ✅ PRODUCTION / SUPPLY NOTE Rsdpfxsvtx H Rs Amueu This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, daya: 15 kW (20,39 hp), gaya penekanan: 200 t, lebar meja: 800 mm, panjang meja: 1.100 mm, gaya punching: 200 t, lubang tembus di meja: 220 mm, diameter silinder: 60 mm, penyesuaian langkah: 180 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Excentric presses are mechanical presses designed for cold forming operations such as punching, cutting, and die forming, operating via a force generated through an eccentric mechanism. Thanks to their high production speed and repeatability, they provide an efficient and reliable solution for serial production lines. CRONOSSTECH C-Type Eccentric Press 200 Ton is engineered for stable operation in cold forming applications. Its rigid steel construction, pneumatic clutch–brake system, and CE-compliant safety infrastructure deliver reliable performance suitable for mass production. Key Advantages Stable stroke performance and high repeatability in serial production Operator safety-focused design (light curtain + safety systems) Low maintenance need with centralized automatic lubrication Production-ready use with PLC control + dual-hand/foot control Applications Cold cutting and punching operations Cold shearing applications Metal die forming High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-sided slide guide • Spheroidal graphite cast iron connecting rod and gear bearings • Crankshaft and transmission shafts of 4140 tempered steel • Centralized fully-automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directives compliant • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection safety system • PLC control system • Dual-hand/foot control system • Mechanical safety lock system • Emergency reverse motor movement • Designed in accordance with work safety regulations • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 ton) • Hydraulic safety system (standard for 200–300 ton) • Spare bolster plate • Decoiler, feeder, and straightener • 1 die set as per requested specifications • Eight-sided guiding slides ✅ TECHNICAL SPECIFICATIONS (200 TON) Capacity: 200 Ton Throat depth: 340 mm Table–ram distance: 500 mm Rodpfx Asvtyx Ismusu Slide–table distance: 600 mm Distance between columns: 510 mm Ram adjustment (setting): 130 mm Approx. press width: 1900 mm Approx. press depth: 2400 mm Approx. press height: 3000 mm Front anchorage: 920 mm Side anchorage: 1420 mm Table hole diameter: Ø240 mm Table size: 680×1000 mm Die clamping hole diameter: Ø60 mm Ram size: 620×350 mm Floor-to-table height: 805 mm Stroke adjustment: 20–140 mm Strokes per minute: 50 spm Motor power: 18.5 + 0.75 kW Motor speed: 1450 rpm Approx. weight: 9200 kg Note: Please inform us if you require modifications to technical specifications. ✅ PRODUCTION / SUPPLY NOTE: This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, daya: 22 kW (29,91 hp), gaya penekanan: 250 t, panjang langkah: 160 mm, lebar meja: 700 mm, panjang meja: 1.100 mm, kedalaman tenggorokan: 350 mm, penyesuaian langkah: 150 mm, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, excentric-press; an excentric mechanism-powered type of mechanical press used in cold forming operations such as punching, cutting, and die shaping. Its high production speed and repeatability make it an efficient and reliable solution for mass production lines. CRONOSSTECH C-Type Eccentric Press 250 Ton is designed for stable operation in cold forming applications. Its rigid steel construction, pneumatic clutch–brake system, and CE-compliant safety infrastructure provide reliable performance suitable for mass production. Key Advantages Stable stroke performance and high repeatability in serial production Operator safety-oriented design (light curtain + safety systems) Low maintenance with central automatic lubrication PLC control + dual hand/foot pedal operation for production-ready use Applications Cold cutting and punching operations Cold extrusion applications Metal die forming High-volume production lines ✅ STANDARD FEATURES • Steel fabricated frame • Four-point slide guidance • Nodular cast iron connecting rods and gear housings • Crankshaft and transmission shafts made from 4140 tempered steel • Central automatic grease lubrication system • Pneumatic clutch and brake combination Redsx N Nfbspfx Amusu • CE safety directive compliant • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection system • PLC control system • Dual hand/foot pedal operation • Mechanical safety system • Emergency reverse motor function • Occupational safety regulation compliant • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration mounts • Touchscreen LCD display (standard for 150–300 ton models) • Hydraulic safety system (standard for 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener • One set of dies as per request • 8-point slide guidance ✅ TECHNICAL SPECIFICATIONS (250 TON) Capacity: 250 Tons Throat depth: 350 mm Table–ram distance: 520 mm Slide–table distance: 630 mm Distance between side walls: 520 mm Ram adjustment (shut height): 150 mm Approx. press width: 2000 mm Approx. press depth: 2500 mm Approx. press height: 3100 mm Front anchorage size: 930 mm Side anchorage size: 1430 mm Table hole diameter: Ø250 mm Table size: 700×1100 mm Die clamping hole diameter: Ø60 mm Ram size: 670×380 mm Table height from floor: 810 mm Stroke adjustment: 20–160 mm Strokes per minute: 40 spm Motor power: 22 + 2.2 kW Motor speed: 1450 rpm Approximate weight: 12,000 kg Note: Please contact us if you require alterations in technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, daya: 30 kW (40,79 hp), gaya penekanan: 300 t, panjang langkah: 200 mm, lebar meja: 700 mm, panjang meja: 1.200 mm, kedalaman tenggorokan: 370 mm, penyesuaian langkah: 150 mm, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH C-Frame Eccentric Press 300 Ton An eccentric press is a type of mechanical press powered by force generated through an eccentric mechanism. It is used for cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Frame Eccentric Press 300 Ton is designed for stable operation in cold forming applications. Its rigid steel construction, pneumatic clutch-brake system, and CE-compliant safety infrastructure provide reliable performance suitable for mass production environments. Key Advantages - Stable stroke performance and high repeatability in serial production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement via central automatic lubrication - Production-ready operation with PLC control + two-hand/foot pedal mode Application Areas - Cold cutting and punching operations - Cold blanking applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-sided slide guide • Spheroidal cast iron connecting rod and gear housings • Crankshaft and transmission shafts made from 4140 quenched and tempered steel • Centralized fully automatic grease lubrication • Pneumatic clutch and brake combination • Compliant with CE safety directives • Dual-coil safety valve Redpfx Ajx N Nfhjmuju • Manually adjustable stroke • Light curtain finger and hand protection system • PLC control system • Two-hand/foot pedal operation system • Mechanical lock system • Emergency reverse motor function • Compliant with occupational safety regulations • Meets CE standards ✅ OPTIONAL FEATURES • Anti-vibration mounts • Touchscreen LCD display (standard for 150–300 ton) • Hydraulic lock system (standard for 200–300 ton) • Spare bolster plate • Decoiler, feeder, and straightener • One set of dies as per requested specifications • 8-sided slide guide ✅ TECHNICAL SPECIFICATIONS (300 TON) Capacity: 300 tons Throat depth: 370 mm Table–ram distance: 530 mm Slide–table distance: 650 mm Distance between uprights: 470 mm Ram adjustment (regulation): 150 mm Approx. press width: 2000 mm Approx. press depth: 2700 mm Approx. press height: 3200 mm Front anchoring dimension: 940 mm Side anchoring dimension: 1440 mm Table hole diameter: Ø260 mm Table size: 700×1200 mm Die clamp slot diameter: Ø60 mm Ram size: 780×400 mm Table height from ground: 810 mm Stroke adjustment: 20–200 mm Strokes per minute: 38 spm Motor power: 30 + 2.2 kW Motor speed: 1450 rpm Approx. weight: 13,200 kg Note: Please inform us if you require any modifications in technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, daya: 4 kW (5,44 hp), gaya penekanan: 40 t, lebar meja: 440 mm, panjang meja: 700 mm, gaya punching: 40 t, lubang tembus di meja: 140 mm, diameter silinder: 35 mm, penyesuaian langkah: 80 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Eccentric press is a type of mechanical press that operates via an eccentric mechanism to deliver force in cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for series production lines. CRONOSSTECH C Frame Eccentric Press 40 Ton is designed for stable operation in cold forming applications. Its rigid steel construction, pneumatic clutch–brake system, and CE-compliant safety infrastructure deliver a reliable performance suitable for mass production. Key Advantages: Stable stroke performance and high repeatability in mass production Operator safety-focused design (light curtain + safety systems) Low maintenance requirement with central automatic lubrication Ready-to-use with PLC control + dual hand/foot control Fields of Application: Cold cutting and punching operations Cold shearing applications Metal die forming High volume production lines ✅ STANDARD FEATURES • Steel welded frame • Four-sided guided slide • Spheroidal cast iron connecting rod and gear bushings • Crankshaft and transmission shafts made of 4140 tempered steel • Fully automatic central grease lubrication system Redpfx Aevtx Axsmuju • Combined pneumatic clutch and brake • CE safety compliant • Dual coil safety valve • Manually adjustable stroke • Finger–hand protection with light curtain • PLC control system • Dual hand/foot control system • Mechanical lock system • Emergency reverse motor function • In compliance with occupational safety regulations • Conforms to CE standards ✅ OPTIONAL FEATURES • Anti-vibration pad • Touchscreen LCD panel (standard for 150–300 ton) • Hydraulic safety system (standard for 200–300 ton) • Spare bolster plate • Decoiler, feeder, and straightener • One set of dies according to requirements • 8-point guided slide ✅ TECHNICAL SPECIFICATIONS (40 TON) Capacity: 40 Ton Throat depth: 220 mm Table–ram distance: 340 mm Clearance between uprights: 330 mm Ram adjustment: 60 mm Approximate width: 1050 mm Approximate depth: 1280 mm Approximate height: 2100 mm Front anchoring dimension: 575 mm Side anchoring dimension: 740 mm Bolster hole diameter: Ø150 mm Bolster size: 440×630 mm Die clamping hole diameter: Ø40 mm Ram size: 290×180 mm Table height from floor: 720 mm Stroke adjustment: 10-70 mm Strokes per minute: 55 spm Motor power: 4 kW Motor speed: 1450 rpm Approx. weight: 2100 kg Note: Please let us know if you require modifications in technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 130 t, lebar meja: 750 mm, panjang meja: 1.000 mm, gaya punching: 130 t, lubang tembus di meja: 220 mm, diameter silinder: 55 mm, penyesuaian langkah: 140 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Excentric press is a type of mechanical press used in cold forming operations such as punching, cutting, and die forming, powered by force generated via an eccentric mechanism. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for mass production lines. CRONOSSTECH C-Type Eccentric Press 125 Ton is designed for stable operation in cold forming applications. Its rigid steel construction body, pneumatic clutch–brake system, and CE-compliant safety infrastructure provide reliable performance suitable for mass production. Key Advantages Stable stroke performance and high repeatability in mass production Operator safety-oriented design (light curtain + safety systems) Low maintenance requirements with centralized automatic lubrication Production-ready operation with PLC control + dual hand/foot control Fields of Application Cold cutting and punching operations Cold breaking applications Metal die forming High-volume production lines ✅ STANDARD FEATURES • Steel construction body • 4-sided guided ram • Spheroidal graphite cast iron connecting rod and gearboxes • Crankshaft and transmission shafts made from 4140 quenched and tempered steel • Centralized fully automatic grease lubrication system • Pneumatic clutch and brake combination • Complies with CE safety directives • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection safety system • PLC control system • Dual hand/foot control system • Mechanical safety system • Emergency reverse motor operation • Complies with occupational safety regulations • Conforms to CE standards ✅ OPTIONAL FEATURES • Anti-vibration pads • Touch LCD screen (standard for 150–300 tons) • Hydraulic safety system (standard for 200–300 tons) • Spare table • Decoiler, feeder, and straightener • One set of die set as per request • 8-guideway slide system ✅ TECHNICAL SPECIFICATIONS (125 TON) Capacity: 125 Ton Throat depth: 310 mm Table–ram distance: 500 mm Slide–table distance: 510 mm Distance between side frames: 450 mm Ram adjustment (stroke setting): 100 mm Press width: 1500 mm Press depth: 2200 mm Press height: 2700 mm Front anchoring length: 790 mm Side anchoring length: 1250 mm Table hole diameter: Ø210 mm Table size: 630×820 mm Die clamping hole diameter: Ø55 mm Ram size: 500×250 mm Table height from floor: 785 mm Stroke adjustment: 10–125 mm Strokes per minute: 50 SPM Motor power: 11 kW Motor speed: 1450 rpm Weight: 6000 kg Note: If you require changes in technical specifications, please let us know. ✅ PRODUCTION / SUPPLY NOTE Redjvtyvgepfx Amueu This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, daya: 15 kW (20,39 hp), gaya penekanan: 160 t, lebar meja: 920 mm, panjang meja: 660 mm, kedalaman tenggorokan: 320 mm, gaya punching: 160 t, diameter silinder: 55 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Excentric press is a type of mechanical press driven by a force generated through an eccentric mechanism, mainly used for cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it serves as an efficient and reliable solution for mass production lines. CRONOSSTECH C-Type Excentric Press 150 Ton is designed for stable operation in cold forming applications. Its rigid steel body, pneumatic clutch-brake system, and CE-compliant safety infrastructure offer reliable performance suitable for serial production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance needs with centralized automatic lubrication - Production-ready use with PLC control + dual-hand/foot pedal operation Applications - Cold cutting and punching operations - Cold shearing applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel construction body • Four-way guided slide • Nodular cast iron connecting rod and gear housings • Crankshaft and transmission shafts made of 4140 hardened steel • Centralized fully automatic grease lubrication • Pneumatic clutch and brake combination • CE safety directives compliant • Twin-coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection system • PLC control system • Dual-hand/foot pedal control system • Mechanical safety system • Emergency reverse motor motion • Compliant with occupational safety regulations • In line with CE standards ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD panel (standard for 150–300 tons) • Hydraulic safety system (standard for 200–300 tons) • Spare bolster plate • Decoiler, feeder and straightener • 1 custom-designed die set • 8-way slide guiding ✅ TECHNICAL SPECIFICATIONS (150 TON) Capacity: 150 Ton Throat depth: 320 mm Die–ram distance: 500 mm Slide–table distance: 540 mm Clearance between uprights: 500 mm Ram adjustment (stroke adjustment): 120 mm Approximate press width: 1600 mm Approximate press depth: 2280 mm Approximate press height: 2750 mm Front anchorage: 840 mm Side anchorage: 1300 mm Table hole diameter: Ø220 mm Table size: 660×920 mm Die mounting hole diameter: Ø55 mm Ram size: 600×290 mm Table height from floor: 805 mm Stroke adjustment: 10–125 mm Strokes per minute: 42 spm Motor power: 15 kW Motor speed: 1450 rpm Rodpfx Aevtywdjmuju Approximate weight: 7100 kg Note: Please inform us if you require modifications to technical specifications. ✅ PRODUCTION/SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. All sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, daya: 3 kW (4,08 hp), gaya penekanan: 35 t, panjang langkah: 70 mm, lebar meja: 400 mm, panjang meja: 600 mm, berat keseluruhan: 1.500 kg, gaya punching: 35 t, penyesuaian langkah: 45 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, The eccentric press is a type of mechanical press operating with force generated via an eccentric mechanism and is used in cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it offers an efficient and reliable solution for serial production lines. The CRONOSSTECH C-Type Eccentric Press 35 Ton is engineered for stable operation in cold forming applications. Its rigid steel construction frame, pneumatic clutch–brake system, and CE-compliant safety infrastructure deliver reliable performance suitable for mass production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirements via centralized automatic lubrication - Production-ready with PLC control + dual hand/foot control Areas of Application - Cold cutting and punching operations - Cold shearing applications - Metal forming with dies - High-volume production lines ✅ STANDARD FEATURES - Steel construction frame - Four-sided slide guidance - Spheroidal cast iron connecting rod and gear bushings - Crankshaft and transmission shafts made of 4140 tempered steel - Centralized fully automatic grease lubrication system - Pneumatic clutch and brake combination - Conforms to CE safety directives - Dual solenoid safety valve - Manually adjustable stroke - Light curtain hand–finger protection system - PLC control system - Dual hand/foot control system - Mechanical safety interlock - Emergency reverse motor operation - Complies with occupational safety regulations - Meets CE standards ✅ OPTIONAL FEATURES - Anti-vibration pads - Touchscreen LCD panel (standard on 150–300 ton models) - Hydraulic safety system (standard on 200–300 ton models) - Spare bolster plate - Decoiler, feeder, and straightener - One custom die set as specified - Eight-sided gibbing ✅ TECHNICAL SPECIFICATIONS (35 TON) - Capacity: 35 Tons - Usable bed area: 400×600 mm - Stroke range: 0–70 mm - Nominal material thickness: 2.5 mm - Stroke per minute (SPM): 120 - Shut height (bed to slide): 330 mm - Adjustment (ram adjustment): 45 mm - Bed through-hole diameter: Ø130 mm - Slide (ram) die shank diameter: Ø35 mm - Safety interlock: Mechanical lock - Lubrication system: Automatic lubrication - PLC: Yes - Safety light curtain: Yes - Working system: Pneumatic clutch–brake - Mounting method: Floor mounted - Frame type: C-frame steel construction - Motor power: 3 kW Rodpfx Amex N Nd Rjueu - Motor speed (RPM): 1450 - Approximate machine dimensions (L×W×H): 1100×1400×1800 mm - Approximate weight: 1500 kg Note: If you require any changes to the technical specifications, please inform us. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales support are managed directly by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, daya: 7,5 kW (10,20 hp), gaya penekanan: 100 t, lebar meja: 670 mm, panjang meja: 950 mm, gaya punching: 100 t, lubang tembus di meja: 180 mm, diameter silinder: 45 mm, penyesuaian langkah: 120 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Excentric presses are types of mechanical presses powered by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and stamping. Thanks to their high production speed and repeatability, they offer efficient and reliable solutions for mass production lines. The CRONOSSTECH C-Type Excentric Press 100 Ton is designed for stable performance in cold forming applications. Its rigid steel construction, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance suited for serial production. Key Advantages • Stable stroke performance and high repeatability in mass production • Operator safety-focused design (light curtain + safety systems) • Low maintenance requirement thanks to centralized automatic lubrication • Production-ready use with PLC control + two-hand/foot pedal operation Application Areas • Cold cutting and punching operations • Cold shearing applications • Metal die forming • High-volume production lines ✅ STANDARD FEATURES • Steel construction body • Slides supported on 4 surfaces • Spheroidal graphite cast iron connecting rod and gear bearings • Crankshaft and transmission shafts made of 4140 tempered steel • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety compliance • Dual-coil safety valve • Manually adjustable stroke • Light curtain hand–finger safety protection system • PLC control system • Two-hand/foot pedal control system • Mechanical safety system • Emergency reverse motor function • Complies with occupational safety regulations • Conforms to CE standards ✅ OPTIONAL FEATURES • Anti-vibration pads • Touch-screen LCD display (standard on 150–300 ton models) • Hydraulic safety system (standard on 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener • One tooling set upon request • 8-point slide guide ✅ TECHNICAL SPECIFICATIONS (100 TON) Capacity: 100 Ton Throat depth: 300 mm Table–ram distance: 400 mm Ram–table distance: 465 mm Distance between side frames: 420 mm Ram adjustment (stroke adjustment): 85 mm Approx. press width: 1400 mm Approx. press depth: 1900 mm Approx. press height: 2450 mm Front anchorage dimension: 710 mm Side anchorage dimension: 1135 mm Bolster hole diameter: Ø200 mm Bolster size: 600×780 mm Die clamping slot diameter: Ø50 mm Ram size: 405×240 mm Rjdpfx Asvtx Inomusu Table height from floor: 775 mm Stroke adjustment: 10–110 mm Strokes per minute: 50 spm Motor power: 11 kW Motor speed: 1450 rpm Approximate weight: 4650 kg Note: If you require any changes in the technical specifications, please contact us. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.