Beli Cobra bekas (45)

Kondisi: baru, MEP COBRA 352 NC 5.0 [Fully Automatic] Article Number CB352NC 5.0 Motor Power 2.6/3.5 kW Kdodpfechkwhjx Aa Nog Vise Opening 180 mm Band Dimensions 350x32x3.4 mm Weight 600 kg Speed 1700/3400 rpm Cutting Capacity 0° 120 / 105 / 180x70 mm Cutting Capacity 45° right 120 / 100 / 135x60 mm Cutting Capacity 45° left Cutting Capacity 60° right Cutting Capacity 60° left Description Mitre cutting automatic saw with semi-automatic function for cutting aluminium and light metal alloys. Mitre cuts from 45° right to 45° left, with the saw head swivelling 0°-45° to the left. Control is via multi-microprocessor units, while two NC-controlled axes allow up to 1,000 different cutting programs to be stored, each with variable quantities and lengths, for the same material. -New centralized control panel on an articulated arm, allowing operation from any working position and immediate access to the emergency stop at all times. -Fieldbus communication system with dual microprocessor and serial port. -Display with 20 characters x 4 lines for real-time indication of the following technical parameters: number of programmed and completed cuts, saw blade thickness, feed length, cutting time, ammeter, and over 100 diagnostic messages and warnings. -New – Alarm and error message logging with event history display. New – 600 mm material feed with drive motor and ball screw, mounted on opposing ball bearings. -New – Low-voltage control panel: Membrane keypad made of polyester with thermoformed, raised buttons and activation LED. -Stroke of saw bow programmable directly from the control panel to adapt to cutting material. -Ball bearing mounted turntable for easy and precise rotation. -Clamping system with two front-end vises, positionable along the length of the part. -Adjustable mechanical stops for rapid head positioning at 0 and 45 degrees both left and right. For further technical data, please refer to the attached PDF document (page 3 of the catalog excerpt).

Kondisi: bekas, Saw blade diameter: 350 mm Cutting range at 90 degrees (round): 120 mm Cutting range at 90 degrees (square): 105 mm Cutting range at 90 degrees (flat): 180 x 70 mm Cutting range at 45 degrees (round): 120 mm Cutting range at 45 degrees (square): 100 mm Cutting range at 45 degrees (rectangular): 135 x 60 mm Saw blade speeds: 1,700 / 3,400 rpm Total power requirement: 1.5 / 2.2 kW Machine weight approx.: 0.285 t Dimensions (L x W x H): 1.2 x 1.4 x 1.4 m Kedofc T Ugjpfx Aa Njdg Semi-automatic circular saw for cutting solid and hollow aluminium materials as well as light metal alloys, equipped with an electro-welded carbide-tipped blade. The machine is suitable for miter cuts from 45° right to 45° left. Thanks to the alignment of the vertical axis, it is possible to carry out sawing operations with the head tilted from 0° up to 45° to the left.

Kondisi: baru, Saw blade diameter: 350 mm Cutting capacity at 90 degrees (round): 120 mm Cutting capacity at 90 degrees (square): 105 mm Cutting capacity at 90 degrees (flat): 180 x 70 mm Cutting capacity at 45 degrees (round): 120/110 mm Cutting capacity at 45 degrees (square): 10/95 mm Cutting capacity at 45 degrees (flat): 135 x 60 mm Motor: 2.5 kW Speed: 1700 / 3400 rpm Machine weight: approx. 600 kg Dimensions (L x W x H): 2.0 x 1.5 x 1.7 m Kdodofg Rlgspfx Aa Nsg COBRA 352 NC 5.0, automatic circular saw with semi-automatic operation, suitable for cutting aluminium and light metal alloys using carbide-tipped circular saw blades. Miter saw for angle cuts from 45° right to 45° left. The vertical orientation allows for sawing operations with the saw head tilted between 0° and 45° to the left. Numerically controlled circular saw machine with the new Windows CE-based control system, specifically developed by MEP for automatic machines.

Kondisi: bekas, Saw blade diameter: 350 mm Cutting capacity at 90° (round): 120 mm Cutting capacity at 90° (square): 105 mm Cutting capacity at 90° (flat): 180 x 70 mm Cutting capacity at 45° (round): 120 mm Cutting capacity at 45° (square): 100 mm Kdjdpfx Ajfc T Ufoa Nsg Cutting capacity at 45° (rectangular): 135 x 60 mm Saw blade speeds: 1700 / 3400 rpm Total power requirement: 1.5/2.2 kW Machine weight approx.: 0.210 t Dimensions (L x W x H): 0.9 x 1.4 x 1.4 m Manual circular saw machine for cutting aluminum, miter cuts from 45° right to 45° left, and the saw head swivels from 0° to 45° to the left. On the Cobra 352 MA (automatic vice), the vices close automatically when lowering the saw head. • Roller-bearing turntable for fast and precise miter adjustment • Screw lock for locking the saw head in any angular position • Automatic saw blade lubrication • Clamping system consisting of two vices • Saw head lock in the upper position • Adjustable length stop for repeat cuts of equal length • Vice opening: 180 mm

Tahun pembuatan: 1995, Kondisi: bekas, Saw blade diameter 400 mm Cutting diameter 130 mm Speed range 2800 rpm Kedpfx Asq I S R Hja Nedg Total power requirement kW Machine weight approx. 220 kg Dimensions L x W x H 700 x 600 x 1700 mm Semi-automatic - pneumatic clamp - foot switch

Kondisi: baik (bekas), Tahun pembuatan: 2008, nomor mesin/kendaraan: 21100122-F, 25108 Technical Specifications: - Saw blade dimensions: 350 x 3.4 x 32 mm - Saw blade speed: 3,400 rpm Kdsdpfx Aaswq N Swe Njg - Cutting capacity at 90° (round): 120 mm - or (flat): 105 x 105 mm - or (flat): 180 x 70 mm - Cutting capacity at 45° (round): 110 mm - or (flat): 135 x 60 mm - Mitre adjustment left and right: 45° - Tiltable mitre adjustment of the saw head to the left for bevel cuts - Pneumatic vices - Discharge roller conveyor with length stop: 2,000 mm - Infeed roller conveyor: 3,000 mm - Drive: 400 V / 2.2 kW - Space requirement approx.: W 600 x H 1,730 x D 1,200 mm - Weight approx.: 180 kg

Kondisi: bekas, Tahun pembuatan: 2006, de Kdsdoww Ay Iepfx Aa Nsg

Kondisi: siap digunakan (bekas), Technische Daten 2 Motoren à 132 kW Eintrittsbreite: 750 mm Maximaler Abstand zwischen zwei Messern: 600 mm Nutzbare Höhe: 180 mm Messerdurchmesser: 580 mm Ksdpfxjtn H Ewo Aa Njdg Einlauf: 5,5 m für 6 m Holz Hülse rechts: 230 mm Hülse links: 190 mm Abstand Hülse/Welle: 200 mm Mindestbreite: 18 mm Leistung: 150 m³ Stückware/Tag Leistung und Motoren Abmessungen gesamt Gewicht: 12.000 kg

Kondisi: siap digunakan (bekas), Technische Merkmale 2 Messer pro Kopf Maximale Profilhöhe: 110 mm Maximale Crimpmessserhöhe: 90 mm 3 vertikale Niederhalter Tischbreite: 830 mm Tischerweiterungen aus Aluminium Länge: 1100 mm Fußpedalsteuerung Leistung und Motoren Spannung: 400 V Anschluss: Drehstrom Kedpfxjundfde Aa Nodg Gesamtabmessungen

Tahun pembuatan: 2016, Kondisi: hampir baru (bekas), Screw vacuum pump Manufacturer: Busch Model: Cobra NC 0400 B Condition: As new Kdedpfx Ajfbmnaea Nog Warranty: 6 months

Tahun pembuatan: 2008, Kondisi: sangat baik (bekas), Screw Pump Manufacturer: Busch Kdsdpfxjd Rafbo Aa Njg Type: Cobra DS 600 E Condition: very good condition Availability: ex-stock

Kondisi: hampir baru (bekas), Tahun pembuatan: 2012, Pumping station Screw vacuum pump & Roots vacuum pump Manufacturer: Busch Model: Cobra NC 0630 B + WV 2000 C Kjdsv I Ak Nspfx Aa Nodg Condition: As new, factory overhauled Warranty: 6 months

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 11900715/C, diameter mata gergaji: 350 mm, panjang pemakanan sumbu X: 180 mm, panjang umpan sumbu Z: 170 mm, panjang total: 2.210 mm, lebar total: 1.100 mm, tinggi total: 1.550 mm, Rentang pemotongan baja bulat pada 90°: 120 mm, Rentang pemotongan baja bulat pada 45°: 120 mm, jenis arus masuk: tiga fasa, kecepatan rotasi (min.): 15 rpm, kecepatan rotasi (maks.): 90 rpm, ketinggian potong (maks.): 170 mm, berat keseluruhan: 530 kg, kecepatan mata gergaji: 90 rpm, tegangan masuk: 400 V, Rentang pemotongan baja persegi pada 45°: 100 mm, Kisaran pemotongan baja persegi pada 90°: 105 mm, penggerak gergaji: 2.200 W, diameter pemotongan: 120 mm, lubang pisau gergaji: 32 mm, de Kodpfswtr Iyex Aa Nodg

Kondisi: baik (bekas), Mains time for servo amplifier - AC supply voltage: 18-110 V AC / 47-63 Hz - DC intermediate circuit voltage: 24-155 V Kdedeb N E Epspfx Aa Neg - Dimensions: 60/165/H240 mm - Weight: 1.7 kg

Tahun pembuatan: 2016, Kondisi: baik (bekas), de-Haloila CobraX Palettenwickler 2016, Palettenwickler, Dreharm, wickelt bis zu 2300 mm, 1-phasig Kdodpfx Aajrywtbo Nog

Kondisi: siap digunakan (bekas), Omron Adept eCobra 800 Robot Industri ID-SN: 595-00114, bekas, kondisi terawat dengan baik, 100% berfungsi, lingkup pengiriman sesuai foto. PERHATIAN: Harap tanyakan biaya pengemasan dan pengiriman secara terpisah! Ksdpfx Ajx Dw Rroa Nodg

Kondisi: baik (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, lebar produk (maks.): 2.500 mm, lebar kerja: 2.500 mm, diameter rol: 1.500 mm, tahun perombakan terakhir: 2024, Cobden Chadwick Linerflex-Drucklinie 2500 mm – zum Verkauf verfügbar, siehe Fotos. Dies ist eine hervorragende Gelegenheit: Es handelt sich um die am besten erhaltene Pre-Print-Druckmaschine, die wir je zum Verkauf oder zur Verlagerung angeboten haben. Die Steuerung der Maschine wurde 2017 von Pre-Print Technology Ltd. auf den neuesten Stand gebracht – neue Servoantriebe zur Positionierung der Druckwerke sowie ein modernes Registersystem für die Nachfolgeeinheit. Bitte teilen Sie uns zeitnah mit, ob Sie die Anlage besichtigen möchten. Details zur Cobden Chadwick Linerflex Druckmaschine, Baujahr 1991 Standort der Maschine: Vereinigtes Königreich Zusammenstellung der Drucklinie: Kdjdpfxot Uc Iqj Aa Nog - 6-Farben C.I. Druckwerk - 1 Farbe Vorfärbeeinheit mit Schwenkarm (Cantilever) - 1 Farbe Nachfolgeeinheit mit Schwenkarm (Cantilever) - Doppelabrollung Wood & Stirling - Marquip Spleißer - Warburton Aufwickler - Antriebssystem für Vorfärbeeinheit, Chill-Rollen, Lackiereinheit und Aufwickler - Trocknung: IR-Kassetten von Waverley - Fife Bahnsteuerung - Servomotoren zur Positionierung der Druckwerke Technische Daten der ursprünglichen Ausführung: - Max. Geschwindigkeit: 300 m/min - Rapportlänge: 700–2000 mm in allen Einheiten - Zahnteilung: 10 mm - Maximale Druckbreite: 2.489 mm (98") - SPS: Mitsubishi - Hauptrahmen: hellblau/azur Zusätzliche Ausrüstung: - Heaford Cobra Montage-Proofgerät - AV Flexologic Montage-Proofgerät - Bestand an Druckzylindern (120 Stück) inkl. Zahnrädern und Hülse - Bestand an Rasterwalzen (17 Stück) inkl. Zahnrädern und Kupplungen - Cantilever-Druckhülsen (12 Stück) - Lagersystem für Druck- und Rasterwalzen mit Deckenlaufkran - C.I. Temperaturkontrolleinheit - Kühlgerät für Chill-Rollen - Druckwerke mit Rakelkammern und zugehöriger Farbversorgung - Mobiler Bedienwagen für Zugang zu den Druckwerken - Mobile Wagen für Druck- und Rasterwalzen - C.I. Hebe-Vorrichtung Betriebsspannung der Maschine: 415 V, 50 Hz

Kondisi: baik (bekas), Voll funktionsfähige Fertigungsstraße für Holzfensterrahmen Die Linie besteht aus: Kdodpeu E Hy Hjfx Aa Nog 1. Materialheber 2. Wadkin XR7011 Vierseitenhobel 3. Doppelendprofiler (Doppelzapfmaschine) 4. Sechsseitenhobel (Alfred Harbs: Baujahr 1990) 5. Grundierkabine (3 Krautzberg KAA-1300 Spritzpistolen, Wagner Cobra 35:1 Hochdruckpumpe) 6. Trockenkammer (DryFinn, betrieben über Zentralheizung) 7. Profil-Schleifmaschine Die Anlage wurde zur Herstellung von Fensterrahmen eingesetzt und befindet sich in gutem Zustand. Der Preis für die Anlage ist vom Käufer zu bieten. Der Käufer ist für den Abbau und den Transport verantwortlich. Bei weiteren Fragen zur Produktionstechnik kontaktieren Sie uns bitte.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, Wir verkaufen eine komplette Holz-Aluminium-Fensterflügel-Fertigungslinie. Die Flügel-Fertigungsstraße besteht aus: 1. Holzpaketheber mit Rollbahn (4x1250 kg) Kdodpfou Hgi Dsx Aa Nog 2. 9-Wellen-Kantenschäler Leadermac LMC 923 Hypermac (Baujahr 2012, max. Arbeitsbreite 230 mm) 3. Pedolin-Bearbeitungszentrum (Baujahr 2003, schneidet optimierte Einzelteile programmgeführt, fräst und setzt Verriegelungspunkte, fräst Pfostenverbindungen, bohrt Montageöffnungen) 4. Grundier-Lackierkabine (4x Wagner GA250Al Spritzpistolen, Wagner Cobra Hochdruckpumpe) 5. Trocknungskammer

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Sawmill for sale in Belgium Location: Belgium Application: Suitable for processing hardwood and softwood Condition: Technically in excellent condition Included in the price: All machines, auxiliary equipment, spare parts, and saw blades 🔧 Main lines of the plant 1. External infeed and first cut • 25 m chain infeed conveyor for logs • Holtec ES 120 crosscut saw (Year: 1995)  - Max. cutting diameter: 1200 × 600 mm  - Saw chain type: chainsaw  - Motor power: approx. 11–15 kW • Cassel Metal Shark Octa metal detector  - Eight-way opening, DSP technology, suitable for bulk material • 5 m long outfeed roller conveyor 2. Internal wood processing • E. Gillette Europe automatic log feeder  - Length: 3.6 m / Diameter: 400–1200 mm  - Capacity: 30–60 logs/hour  - Driven by electric and hydraulic units • Brenta PN 1600 band saw machine (2014)  - Roller Ø: 1600 mm  - Capacity: logs up to Ø1200 mm  - Band width: 100–160 mm  - Automatic infeed/outfeed with belt conveyor • Elmed ARGUS 3 metal detector  - Tunnel design with split opening  - Suitable for three-shift operation • MEM Cobra 60/650 prismatic edger (2000)  - 2 active saw spindles, 2 × 55 kW motors Kdedjwh U Dmopfx Aa Neg  - Max. cutting height: 120 mm / width: 600 mm  - Automatic infeed and roller outfeed 3. Chipping and transport • Vecoplan VTH 65/25/5/U industrial shredder (2017)  - Inlet: 650 × 250 mm / Power: 55 kW  - Capacity: 1–5 tons/hour • Vecoplan VR 65/24 vibrating table  - Surface: 650 × 2500 mm  - For even feed to the shredder • Vecoplan KKF 500-1K-U drag chain conveyor  - Conveyor width: 500 mm  - Suitable for wood chips, sawdust, pellets 4. Automatic cross-cutting and sorting • Kallfass RA4000R automatic cross-cut system (1995)  - Max. cutting diameter: 150 × 300 mm  - Length up to 4000 mm • MEM IMRPC multi-blade saw (1991)  - Up to 14 saw blades / max. cutting height 160 mm  - Automatic feed, robust industrial design • Kallfass stacking system (1999)  - Automatic stacking with spacer laths  - Max. timber length: 2.5 m 5. Additional machines • Flexiever Mini Screener (2020)  - Capacity: 5–10 m³/hour  - For compost, sand, wood chips • VOLLMER CHC 20 H circular saw sharpening machine  - Blade Ø: 80–700 mm  - Sharpening angle: -20° to +30° • Bammesberger FBA2 surface grinding machine  - Grinding length: 400 mm / width: 140 mm • Ingersoll Rand ML30 screw compressor  - Power: 30 kW  - Air delivery: 4.55 m³/min (7.5 bar)  - Operating hours: 43,198 h 6. Extraction system • APW fan – 18.5 kW, year 1998 (2 fans) • Lysair fans – years 1995 and 2020 • 2 cyclones with rotary valve • Purpose: Efficient extraction of dust, chips and fine particles 🔍 The sawmill can be inspected by appointment in Belgium. All equipment is operational and ready for immediate use. Ideal for industrial timber processing or as a complete investment.

Tahun pembuatan: 1995, Kondisi: diremajakan ulang (bekas), Gergaji pemotongan akhir – gergaji pemotong pinggir MEM Cobra Kdjdpfxjxcp A De Aa Neg Tahun pembuatan kira-kira 1995 Tinggi potong maks. 120 mm, lebar jalur maks. 1.070 mm. 4 sumbu variabel. 2 x 55 kW tenaga penggerak gergaji. Mesin baru direkondisi! Instalasi siap diambil segera!

Kondisi: bekas, Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 352 NC EVO, Circular saw automatic machine with semi-automatic function, designed for cutting aluminium and light metal alloys using carbide-tipped circular saw blades. Includes extraction system and material handling (roller conveyors). Kdedpfx Aov T U Tgoa Neg The machine is suitable for mitre cuts from 45° right to 45° left. By adjusting the vertical alignment, bevel cuts can also be performed with the saw head tilted between 0° and 45° to the left.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jenis bahan bakar: diesel, berat keseluruhan: 23.450 kg, Tahun pembuatan: 2018, jam operasional: 3.950 h, Terex Cobra 230 penghancur benturan di atas track, sama dengan Powerscreen XH250 Tahun 2018 3950 jam kerja asli pada mesin John Deere John Deere 6068, 194 kW Berat: 23.450 kg Bukaan (mm): hingga 860x720 mm Ukuran material maksimum: 400 mm CSS (mm): 0-20 hingga 0-100 mm Kapasitas (t/jam): 100 hingga 150 Hopper masukan: 2,68 m3 Dilengkapi dengan overband magnet Konveyor samping dan prescreem bisa dibeli terpisah Pelat aus 90% Kdodpfx Aasx S Hr Ro Neg Blow bar baru martensitik-keramik dengan lapisan ganda keramik (biru, RecyX) Mesin dalam kondisi kerja sangat baik, siap langsung digunakan

Kondisi: baru, Saw blade diameter 350 x 32 mm Cutting capacity at 90 degrees: round 120 mm Cutting capacity at 90 degrees: square 105 mm Cutting capacity at 90 degrees: flat 180 x 70 mm Cutting capacity at 45 degrees: round 120 mm left Cutting capacity at 45 degrees: round 110 mm right Cutting capacity at 45 degrees: square 100 mm left Cutting capacity at 45 degrees: square 95 mm right Kdodpexaai Nofx Aa Neg Cutting capacity at 45 degrees: flat 135 x 60 mm Saw blade dimensions 350 x 32 Speed 1700 / 3400 rpm Cutting capacity at 45 degrees: round 120 mm Total power requirement 1.5 / 2.2 kW Machine weight approx. 210 kg Space requirement approx. 1170 x 860 x 1600 mm Description: Manual high-performance circular saw for cutting from 45° right to 45° left in aluminium and light metal alloys, with 2 speeds Equipment: - With pneumatic clamps - Saw head can be tilted 45° to one side - Heavy cast iron construction - Ensures vibration-free operation and maximum precision - Head can be additionally tilted up to 45° - Powerful two-speed drive with double V-belts - Large bearing-mounted turntable - Lubrication system with mechanical diaphragm pump - Suction connection for chip extraction Scope of delivery: - Adjustable length stop 600 mm - Tool kit - Operating instructions with wiring diagram - Lifting eyes for transportation * Machine is supplied without saw blade Optional accessories: - Including base frame

Kondisi: baru, Saw blade diameter 350 x 32 mm Cutting capacity at 90°: round 120 mm Cutting capacity at 90°: square 105 x 105 mm Cutting capacity at 90°: flat 180 x 70 mm Cutting capacity at 45°: round 120 / 110 mm Cutting capacity at 45°: square 100x100 / 95x95 mm Cutting capacity at 45°: flat 135 x 60 mm Spindle speed: 1700 / 3400 rpm Control: MEP CNC Total power requirement: 2.6 / 3.5 kW Machine weight approx.: 605 kg Dimensions (L x W x H): 2210 x 1680 x 2150 mm Equipment: - Fully automatic high-performance CNC circular saw * for cuts from 45° right to 45° left * designed for aluminium and light alloy materials - MEP microprocessor control * Windows “CE” based control system * User-friendly interface * Storage capacity for up to 100 cutting programs * Operator interface with 7” touchscreen display and mechanical keys * Swiveling control panel * Display and storage of alarm and error messages * Saw head positioning and feeder movement via joystick * Automatic detection of cutting start position - Material feed with stepper motor and ball screw drive * Travel: 600 mm * Repeatable for cutting any length - Manually operated safety hood - Mechanical stops at -45°, 0°, +45° * Enable rapid positioning of the saw head - Pneumatic vice system * 2x pneumatic frontal vices * Includes vertical clamp - Heavy cast iron frame for vibration-free operation & highest precision Kodexaa Uxspfx Aa Nodg - Saw head can additionally tilt up to 45° - 2 cutting speeds - Base frame with lockable door - Coolant system (emulsion oil lubrication) - Machine base with forklift pockets - Comprehensive operation manual, maintenance handbook, etc.