Beli Mep Cobra bekas (135)

Kondisi: bekas, Tahun pembuatan: 2017, Cutting capacity at 90 degrees: round 120 mm Cutting capacity at 90 degrees: square 105 mm Cutting capacity at 90 degrees: flat 180x70 mm Cutting capacity at 45 degrees left: round 110 mm Cutting capacity at 45 degrees left: square 95 mm Ksdpfsy Ruvbox Ak Hsdl Cutting capacity at 45 degrees left: flat 135x60 mm Cutting capacity at 45 degrees right: round 120 mm Cutting capacity at 45 degrees right: square 100 mm Cutting capacity at 45 degrees right: flat 135x60 mm Vice opening 180 mm Saw blade dimensions 350x32x3.4 mm Speed 1700/3400 rpm Machine weight approx. 600 kg Semi-automatic cross-cut saw for sawing aluminium and light metal alloys. Bevel cuts from 45° right to 45° left, and saw head swiveling 0°-45° to the left. Control is via multiple microprocessors, while two NC-controlled axes allow programming of up to 1000 different cutting programs for the same material, each with different quantities and lengths. - New centralized control console on an articulated arm for easy operation of the machine from any working position, with the emergency stop always within reach. - Fieldbus communication system with dual microprocessor and serial connection. - Display with 20 characters x 4 lines showing the following technical parameters: number of programmed and executed cuts, saw band thickness, feed length, cutting time, ammeter, and display of over 100 diagnostic messages and warnings. - New – Display and logging of alarm and error messages with the ability to view incidents that have occurred. New – 600 mm material feeder with cutting motor and ball screw mounted on opposing bearings. - New – Low-voltage control panel: polyester membrane keypad with thermoformed and raised pushbuttons and actuation signal. - Stroke movement of the saw bow is programmable directly from the control panel to adapt to the workpiece. - Ball-bearing mounted rotary table for smooth and precise rotation. - Clamping system with two frontally arranged vices, which can be freely positioned along the longitudinal axis of the workpieces. - Adjustable mechanical stops for the quick positioning of the head at angle settings at 0 and 45 degrees right and left.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 350 mm, panjang total: 2.720 mm, tinggi total: 1.740 mm, lebar total: 1.460 mm, berat keseluruhan: 560 kg, Automatic Metal Circular Saw MEP COBRA AX • Cutting angles: 90°, 45° left, 45° right • Cutting capacity (90°, round tube): 105 mm • Cutting capacity (90°, rectangular tube): 180×70 mm • Cutting capacity (45°, round tube): 105 mm • Cutting capacity (45°, square tube): 95 mm • Cutting capacity (45°, rectangular tube): 135×60 mm • Saw blade diameter: 350 mm • Saw blade bore: 32 mm Kdsdpfx Aksy Rmcao Hol • Automatic lubrication • Operation: manual or automatic • Pneumatic material feed • Total power requirement: 2.29 kW • Dimensions (L x W x H): approx. 2720 x 1460 x 1740 mm • Machine weight: approx. 560 kg Description: For sale: Bandsaw / metal bandsaw in good used condition. The machine is fully functional and ready for immediate use. Upon request, we can also send you a video demonstrating the machine in operation. Location: D-89350 Dürrlauingen Price: €1,450 EXW The saw is sold under differential taxation according to § 25a UStG – therefore, VAT will not be shown separately. Delivery within a radius of up to 400 km is possible upon agreement. If you are interested or have any questions, please feel free to contact us. Inspection by appointment possible.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, MEP Cobra 352 MA mesin gergaji lingkaran dingin dalam kondisi sangat baik. Tahun pembuatan: 2014. Pengiriman memungkinkan. Kdodpfeyzbmnex Ak Hjl

Kondisi: baru, cobra352ma-specs Kjdpfxjy Dh Nns Ak Hsdl

Kondisi: bekas, * Saw blade diameter: 350 mm * Cutting capacity at 90° (round): 120 mm * Cutting capacity at 90° (square): 105 mm * Cutting capacity at 90° (flat): 180 x 70 mm * Cutting capacity at 45° (round): 120 mm * Cutting capacity at 45° (square): 100 mm * Cutting capacity at 45° (rectangular): 135 x 60 mm * Saw blade speeds: 1700 / 3400 rpm * Total power requirement: 1.5 / 2.2 kW * Machine weight: approx. 0.210 t * Dimensions (L x W x H): 0.9 x 1.4 x 1.4 m Manual circular saw for cutting aluminum, capable of mitre cuts from 45° right to 45° left, with the saw head swiveling from 0° up to 45° to the left. On the Cobra 352 MA (with automatic vice), the vices close automatically when lowering the saw head. • Roller-bearing turntable for rapid and precise mitre adjustment • Screw locking system to fix the saw head in any angular position • Automatic saw blade lubrication • Clamping system consisting of two vices • Saw head lock in the upper position • Adjustable length stop for consistent cut lengths Kdjdpfxsfc T Ufj Ak Hjl • Vice opening: 180 mm

Kondisi: baru, Sägeblattabmessungen_350_x_32_x_3,4_mm Kdsdpeyv Nqqsfx Ak Hjl

Kondisi: bekas, Tahun pembuatan: 2020, Sägeblattabmessungen-350x32x4 Kjdpfxeyvvnpe Ak Hedl

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, Used automatic circular saw for aluminium MEP Cobra 352 nc 5.0 Year: 2017 Kjdjwu Tz Repfx Ak Hedl Blade dimensions: 350x32x3.4mm Blade speed: 1700/3400 rpm Mitre angle: from -45° to +45° Cutting capacity at 0°: round: 120mm, square: 105mm, rectangle: 180x70mm Touchscreen display Machine weight: 605kg

Kondisi: siap digunakan (bekas), en Kodpfxjyx Az Is Ak Hedl

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Kemiringan bilah: -45° / +45°. Bukaan maksimum ragum: 180 mm Panjang tidak lagi dapat diumpankan: 385 mm Dimensi cakram: 350 mm Kdjdpfox Hw Sqjx Ak Hjl Kecepatan putar bilah: 1700 / 3400 rpm - 2 kecepatan

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 11900715/C, diameter mata gergaji: 350 mm, panjang pemakanan sumbu X: 180 mm, panjang umpan sumbu Z: 170 mm, panjang total: 2.210 mm, lebar total: 1.100 mm, tinggi total: 1.550 mm, Rentang pemotongan baja bulat pada 90°: 120 mm, Rentang pemotongan baja bulat pada 45°: 120 mm, jenis arus masuk: tiga fasa, kecepatan rotasi (min.): 15 rpm, kecepatan rotasi (maks.): 90 rpm, ketinggian potong (maks.): 170 mm, berat keseluruhan: 530 kg, kecepatan mata gergaji: 90 rpm, tegangan masuk: 400 V, Rentang pemotongan baja persegi pada 45°: 100 mm, Kisaran pemotongan baja persegi pada 90°: 105 mm, penggerak gergaji: 2.200 W, diameter pemotongan: 120 mm, lubang pisau gergaji: 32 mm, de-2000-mep-cobra-350ax-automatische-kreissägemaschine–effizient er-metallschnitt-für-die-industrielle-produktion Jetzt verfügbar: MEP Cobra 350AX, eine robuste automatische Abläng-Kreissäge, ideal für industrielle Metallschneideanwendungen. Baujahr 2000, in gutem Betriebszustand. Die Maschine vereint manuelle und automatische Betriebsarten, individuell einstellbare Schnittparameter sowie ein 350-mm-Sägeblatt für konstante, präzise Schnitte. Kjdpfxowtr Iye Ak Hedl 🔧 Hauptmerkmale: Sägeblattgröße: 350 × 32 × 2,5 mm Motorleistung: 2,2 kW Schnittgeschwindigkeiten: 15 / 30 / 45 / 90 U/min Spannbereich (Schraubstocköffnung): 160 mm Spannsystem: Pneumatisch Stromversorgung: 400 V / 3-Phasen / 50 Hz Manueller & Automatikbetrieb: Ja Schnitttiefe & Anschlaghöhe: Vollständig einstellbar Maschinengewicht: 530 kg Abmessungen (L×B×H): 2210 × 1100 × 1550 mm 📏 Schnittkapazitäten: Bei 0°: Rundmaterial: 120 mm Rechteck: 180 × 170 mm Quadrat: 105 × 105 mm Bei 45° links: Rundmaterial: 120 mm Rechteck: 135 × 60 mm Quadrat: 100 × 100 mm Bei 45° rechts: Rundmaterial: 110 mm Rechteck: 135 × 60 mm Quadrat: 95 × 95 mm ⚙️ Ideale Einsatzbereiche: Schneiden von Stahlprofilen, Rohren, Stangen Geeignet für leichte bis mittlere industrielle Fertigung Perfekt für Schlossereien, Stahlhändler und Fertigungsbetriebe ✅ Warum die MEP Cobra 350AX? Vielseitige Gehrungs- und Profilschnitte Doppelmodus (Automatik/Manuell) Kompakt, effizient und einfach in bestehende Produktionsabläufe integrierbar Pneumatisches Spannen für Sicherheit und gleichbleibende Präzision Geringe Investitionskosten – hohe Maschinenleistung MEP Cobra 350AX gebraucht kaufen Automatische Kreissäge gebraucht Metall-Kaltkreissäge Pneumatisch gespannte Kaltkreissäge 350-mm-Kreissäge für Metall Industrielle Ablängsäge für Metall MEP Säge Baujahr 2000 Automatische Metallsäge Irland Kreissäge für Stahlprofile 400V Industrie-Kaltkreissäge *Angaben nach bestem Wissen, jedoch ohne Gewähr*

Tahun pembuatan: 2001, Kondisi: bekas, max-saegeblattdurchmesser-350-mm Kedpfeygin Nsx Ak Hjdl

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 350 mm, Mesin gergaji bundar semi-otomatis untuk aluminium, kayu, dan lain-lain. Produsen: MEP Model: COBRA 350 SX Tahun pembuatan: 1998 Diameter mata gergaji: 350 mm Diameter potong: 120 mm Langkah: -- mm Tinggi kerja: 930 mm Kapasitas potong pada 45°: bulat 120 mm; persegi 180 x 70 mm Kapasitas potong pada 90°: datar 105 mm; persegi 100 mm Mata gergaji: diameter 350 mm, 90 gigi, lubang 32 mm, tebal 3,4 mm Kebutuhan daya total: 1,5 / 2,2 kW Berat mesin sekitar 0,6 t Dimensi ruang sekitar 2,3 x 1,7 x 1,8 m Kjdpfjyrhz Eex Ak Hjdl

Kondisi: baru, Saw blade diameter 350 x 32 mm Cutting capacity at 90 degrees: round 120 mm Cutting capacity at 90 degrees: square 105 mm Cutting capacity at 90 degrees: flat 180 x 70 mm Cutting capacity at 45 degrees: round 120 mm left Cutting capacity at 45 degrees: round 110 mm right Cutting capacity at 45 degrees: square 100 mm left Cutting capacity at 45 degrees: square 95 mm right Cutting capacity at 45 degrees: flat 135 x 60 mm Saw blade dimensions 350 x 32 Speed 1700 / 3400 rpm Cutting capacity at 45 degrees: round 120 mm Total power requirement 1.5 / 2.2 kW Machine weight approx. 210 kg Space requirement approx. 1170 x 860 x 1600 mm Description: Manual high-performance circular saw for cutting from 45° right to 45° left in aluminium and light metal alloys, with 2 speeds Equipment: - With pneumatic clamps - Saw head can be tilted 45° to one side - Heavy cast iron construction - Ensures vibration-free operation and maximum precision - Head can be additionally tilted up to 45° - Powerful two-speed drive with double V-belts - Large bearing-mounted turntable - Lubrication system with mechanical diaphragm pump - Suction connection for chip extraction Scope of delivery: - Adjustable length stop 600 mm - Tool kit - Operating instructions with wiring diagram - Lifting eyes for transportation * Machine is supplied without saw blade Optional accessories: Kdedpsxaai Nofx Ak Hsl - Including base frame

Kondisi: baru, Saw blade diameter 350 x 32 mm Cutting capacity at 90°: round 120 mm Cutting capacity at 90°: square 105 x 105 mm Cutting capacity at 90°: flat 180 x 70 mm Cutting capacity at 45°: round 120 / 110 mm Cutting capacity at 45°: square 100x100 / 95x95 mm Cutting capacity at 45°: flat 135 x 60 mm Spindle speed: 1700 / 3400 rpm Control: MEP CNC Total power requirement: 2.6 / 3.5 kW Machine weight approx.: 605 kg Dimensions (L x W x H): 2210 x 1680 x 2150 mm Equipment: - Fully automatic high-performance CNC circular saw * for cuts from 45° right to 45° left * designed for aluminium and light alloy materials - MEP microprocessor control * Windows “CE” based control system * User-friendly interface * Storage capacity for up to 100 cutting programs Kedpfxsxaa Uxs Ak Hsdl * Operator interface with 7” touchscreen display and mechanical keys * Swiveling control panel * Display and storage of alarm and error messages * Saw head positioning and feeder movement via joystick * Automatic detection of cutting start position - Material feed with stepper motor and ball screw drive * Travel: 600 mm * Repeatable for cutting any length - Manually operated safety hood - Mechanical stops at -45°, 0°, +45° * Enable rapid positioning of the saw head - Pneumatic vice system * 2x pneumatic frontal vices * Includes vertical clamp - Heavy cast iron frame for vibration-free operation & highest precision - Saw head can additionally tilt up to 45° - 2 cutting speeds - Base frame with lockable door - Coolant system (emulsion oil lubrication) - Machine base with forklift pockets - Comprehensive operation manual, maintenance handbook, etc.

Kondisi: baru, Saw blade diameter 350 x 32 mm Cutting capacity at 90 degrees: round 120 mm Cutting capacity at 90 degrees: square 105 x 105 mm Cutting capacity at 90 degrees: flat 180 x 70 mm Cutting capacity at 45 degrees: round 120 / 110 mm Cutting capacity at 45 degrees: square 100 x 100 / 95 x 95 mm Cutting capacity at 45 degrees: flat 135 x 60 mm Blade speed: 1,700 / 3,400 rpm Control system: MEP NC Total power requirement: 1.5 / 2.2 kW Machine weight: approx. 290 kg Dimensions L x W x H: 1,240 x 1,360 x 1,800 mm Equipment: - NC semi-automatic high-performance circular saw * for cuts from 45° right to 45° left * suitable for aluminium and light metal alloys - MEP microprocessor control Kdedpjxaa Hnsfx Ak Hsl * user-friendly interface with display and mechanical keys * start and end positions of the saw head can be saved - Manually opening safety hood - Mechanical stops at -45°, 0°, +45° * enable quick positioning of the saw head - Pneumatic quick-release vice * pneumatic clamping system allows for adjustable clamping pressure * depending on material hardness * optional pneumatic vertical vice available - Heavy cast iron construction ensures vibration-free operation and highest precision - Saw head can be additionally tilted up to 45° - Two saw blade speeds - Base frame with lockable door - Pneumatic coolant/lubrication system - Machine base Scope of delivery: - adjustable length stop, 600 mm - tool kit - adapter for infeed roller conveyor including 1 supporting roller - tool kit - comprehensive operating and maintenance manual, etc. - Machine is supplied without saw blade!

Tahun pembuatan: 1995, Kondisi: bekas, Diameter maks. mata gergaji: 400 mm Kjdpjxf Hb Nofx Ak Hsdl Penjepit material pneumatik

Kondisi: baik (bekas), Tahun pembuatan: 2008, nomor mesin/kendaraan: 21100122-F, 25108 Technical Specifications: - Saw blade dimensions: 350 x 3.4 x 32 mm - Saw blade speed: 3,400 rpm - Cutting capacity at 90° (round): 120 mm - or (flat): 105 x 105 mm Kdedowq N Swjpfx Ak Hel - or (flat): 180 x 70 mm - Cutting capacity at 45° (round): 110 mm - or (flat): 135 x 60 mm - Mitre adjustment left and right: 45° - Tiltable mitre adjustment of the saw head to the left for bevel cuts - Pneumatic vices - Discharge roller conveyor with length stop: 2,000 mm - Infeed roller conveyor: 3,000 mm - Drive: 400 V / 2.2 kW - Space requirement approx.: W 600 x H 1,730 x D 1,200 mm - Weight approx.: 180 kg

Kondisi: bekas, Saw blade diameter: 350 mm Cutting range at 90 degrees (round): 120 mm Cutting range at 90 degrees (square): 105 mm Cutting range at 90 degrees (flat): 180 x 70 mm Cutting range at 45 degrees (round): 120 mm Cutting range at 45 degrees (square): 100 mm Cutting range at 45 degrees (rectangular): 135 x 60 mm Saw blade speeds: 1,700 / 3,400 rpm Total power requirement: 1.5 / 2.2 kW Machine weight approx.: 0.285 t Dimensions (L x W x H): 1.2 x 1.4 x 1.4 m Kedpfx Aksfc T Ugj Hsdl Semi-automatic circular saw for cutting solid and hollow aluminium materials as well as light metal alloys, equipped with an electro-welded carbide-tipped blade. The machine is suitable for miter cuts from 45° right to 45° left. Thanks to the alignment of the vertical axis, it is possible to carry out sawing operations with the head tilted from 0° up to 45° to the left.

Kondisi: baru, Saw blade diameter: 350 mm Cutting capacity at 90 degrees (round): 120 mm Cutting capacity at 90 degrees (square): 105 mm Cutting capacity at 90 degrees (flat): 180 x 70 mm Cutting capacity at 45 degrees (round): 120/110 mm Cutting capacity at 45 degrees (square): 10/95 mm Kdodpfefg Rlgjx Ak Hol Cutting capacity at 45 degrees (flat): 135 x 60 mm Motor: 2.5 kW Speed: 1700 / 3400 rpm Machine weight: approx. 600 kg Dimensions (L x W x H): 2.0 x 1.5 x 1.7 m COBRA 352 NC 5.0, automatic circular saw with semi-automatic operation, suitable for cutting aluminium and light metal alloys using carbide-tipped circular saw blades. Miter saw for angle cuts from 45° right to 45° left. The vertical orientation allows for sawing operations with the saw head tilted between 0° and 45° to the left. Numerically controlled circular saw machine with the new Windows CE-based control system, specifically developed by MEP for automatic machines.

Kondisi: bekas, For sale: Bandsaw MEP PH 261-1HB. The machine is pre-owned, in good condition, and fully operational. Inspection and testing on-site are possible. MEP PH 261-1HB – professional manual gravity bandsaw for cutting metal, specifically designed for tubes, profiles, and solid materials. The HB system enables automatic descent cutting without operator intervention. Kjdpfey R Sgwox Ak Hedl Specification: Model: MEP PH 261-1HB Cutting angle: 0° to +60° Cutting capacities: 0° – Ø225 mm, 200 x 200 mm, 240 x 160 mm +45° – Ø160 mm, 140 x 140 mm, 155 x 115 mm +60° – Ø90 mm, 90 x 90 mm Maximum vise opening: 245 mm Blade dimensions: 2450 x 27 x 0.9 mm Blade speed: 46 / 92 m/min Motor power: 0.94 / 1.1 kW Table height: 950 mm Machine weight: approx. 240 kg Cast iron construction for vibration reduction and more precise cutting Quick angle adjustment Suitable for cutting steel, stainless steel, aluminium, and other metals More details: MEP PH 261-1HB Professional Italian machine, ideal for workshops, manufacturing, and metalworking companies. If you have any further questions, feel free to ask.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, jam operasional: 1.750 h, Fungsionalitas: berfungsi sepenuhnya, MEP Tiger 372 CNC LR 4.0 Metal Circular Saw Fully Automatic (2019) Kdsdpfx Akoy S Ezwj Hsl Manufacturer: Mep Model: Tiger 372 CNC LR 4.0 Fully Automatic Metal Circular Saw Year of manufacture: 2019 Condition: Used, very good, tested and cleaned Operating hours: 1,750 h Cutting range ROUND 0°: 120 mm Cutting range ROUND 45° left: 115 mm Cutting range ROUND 60° left: 115 mm Cutting range ROUND 45° right: 115 mm Cutting range SQUARE 0°: 110 mm Cutting range SQUARE 45° left: 100 mm Cutting range SQUARE 60° left: 90 mm Cutting range SQUARE 45° right: 100 mm Cutting range FLAT 0°: 180 x 100 mm Cutting range FLAT 45° left: 120 x 100 mm Cutting range FLAT 60° left: 90 x 90 mm Cutting range FLAT 45° right: 120 x 100 mm Variable speed: 15 to 150 rpm Motor: 5.5 kW Saw blade: 370 x 32 mm Coolant system Length: 2,500 mm Width: 1,840 mm Height: 1,890 mm Weight: 1,060 kg Scope of delivery: – Documentation – 2 m infeed roller conveyor – Machine lamp – Chip conveyor – Coolant system

Kondisi: hampir baru (bekas), Tahun pembuatan: 2018, jam operasional: 2.150 h, Fungsionalitas: berfungsi sepenuhnya, MEP TIGER 372 CNC LR 4.0 Metal Circular Saw + CB4001 Magazine High-performance metal circular saw CNC automatic machine with microprocessor control for cutting from 45° right to 60° left. Manufacturer: MEP Model: TIGER 372 CNC LR 4.0 Year of manufacture: 2018 Condition: Very good, little used Operating hours: 2128 h Cutting hours: 1738 h Machine equipped with microprocessor control and two CNC-controlled axes, allowing up to 300 cutting programs per material or per material type on the CB4001 loading magazine, each with its own quantity and length. Cutting capacity ROUND 0°: 120 mm Cutting capacity ROUND 45° left: 115 mm Cutting capacity ROUND 60° left: 115 mm Cutting capacity ROUND 45° right: 115 mm Kdsdpfey S Ezqex Ak Hel Cutting capacity SQUARE 0°: 110 mm Cutting capacity SQUARE 45° left: 100 mm Cutting capacity SQUARE 60° left: 90 mm Cutting capacity SQUARE 45° right: 100 mm Cutting capacity FLAT 0°: 180 x 100 mm Cutting capacity FLAT 45° left: 120 x 100 mm Cutting capacity FLAT 60° left: 90 x 90 mm Cutting capacity FLAT 45° right: 120 x 100 mm Infinitely variable speed: 15 to 150 rpm Motor: 5.5 kW Saw blade: 370 x 32 mm Coolant system Length: 2500 mm Width: 1840 mm Height: 1890 mm Weight: 1060 kg Scope of delivery: – Original documentation – 4 saw blades

Kondisi: bekas, Tahun pembuatan: 1997, Sägebandabmessungen 3150 x 25,4 x 0,9 mm 2 Geschwindigkeiten 20/40 m/min Kdedpfx Akeyyc A Ij Hjl Schnittbereich bei 90 Grad: rund 260 mm Schnittbereich bei 90 Grad: vierkant 250 mm Schnittbereich bei 90 Grad: flach 320 x 200 mm Schnittbereich bei 45 Grad: rund 230 mm Schnittbereich bei 45 Grad: vierkant 210 mm Schnittbereich bei 45 Grad: flach 240 x 200 mm Zubehör: -Posten Sägebänder

Kondisi: baik (bekas), Tahun pembuatan: 2015, Cutting range 300 mm Cutting range at 90°: flat 330 x 260 mm Cutting range at 90°: square 260 x 260 mm Cutting range at 45°: round 260 mm Cutting range at 45°: flat 270 x 200 mm Cutting range at 45°: square 250 mm Cutting range at 60°: round 180 mm Cutting range at 60°: flat 170 x 170 mm Cutting range at 60°: square 180 mm Automatic feed 9999.9 mm Minimum feed 2.0 mm Minimum cutting diameter 5.0 mm Blade speed 15 - 100 m/min Vice opening 340 mm Saw blade dimensions 3650 x 27 x 0.9 mm Control MEP CNC Total power requirement 2.2 kW Weight 1240 kg Dimensions (LxWxH) 1800 x 1900 x 1750 mm Current new price approx. 23,000 Euro Kdjdoy I Da Rspfx Ak Hsl Special price on request Equipment: - Robust electro-hydraulic fully automatic band saw (INDUSTRIAL) - With additional semi-automatic function, for cuts from 0° to 60° to the left - WINDOWS “CE” based MEP 50 control and 7” touch screen display * Simple and quick setting of all machine parameters * Additional softkeys + backlit display * 10 programs with up to 9999 pieces and max. 9999.9 mm length each - Material feed with stepper motor and ball screw * Single stroke 600 mm, repeatable for any length * Accuracy of ± 0.1/600 mm - Feeder with protective cover and safety limit switch - Precise adjustment of cutting feed rate with indication in mm/min - Saw head positioning and feeder movement via joystick - Automatic detection of the cutting start - Large-sized, adjustable steel cast drive wheels - Saw blade tension with tension monitoring and display indication - Carbide blade guides for highest cutting precision - Automatic monitoring of cutting load - Vice with quick adjustment * Replaceable clamping and stop jaws - Large, side-mounted swarf tray and coolant tank * Equipped with 2 electric pumps for saw blade lubrication and cooling * Coolant gun for machine cleaning - Swarf cleaning brush for the saw blade - Operating manual in German Manufacturer information: When installing this saw in a network with a residual current circuit breaker (RCCB), it should be all-current sensitive and not less than 300 mA.