Beli Collet bekas (929)

Kondisi: sangat baik (bekas), Dijual satu set holder alat SK40 dengan collet ER20 serta dilengkapi mata bor dan endmill terpasang. Holder profesional untuk pusat pemesinan CNC, standar DIN 69871 AD (pendinginan melalui spindel). Parameter: • Tipe konus: SK40 • Penjepitan: ER20 • Panjang: 70 mm • Standar: DIN 69871 AD • Pendinginan melalui spindel: YA. Kondisi: sangat baik, holder jarang dipakai, lengkap, sebagian dengan alat sudah terpasang. Ideal untuk: mesin milling CNC, pusat pemesinan, aplikasi profesional. Iedpjxa H Irsfx Aa Neal

Kondisi: baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, Technical details Machining diameter: max. 32 mm Spindle bore: 36 mm Turning length: 320 mm Control: MITSUBISHI MELDAS 635LC Travel max. (X1): 108 mm Travel max. (Y1): 275 mm Travel max. (Z1): 325 mm Travel max. (X3): 238 mm Travel max. (Z3): 410 mm Main spindle speeds: 200 – 8,000 rpm C-axis: 0.001° increments Sub-spindle speed range: 200 – 7,000 rpm C-axis (sub-spindle): 0.001° increments Rapid traverse: 20 m/min Main motor: 3.7 / 5.5 kW Sub-spindle drive power: 1.5 / 2.2 kW Machine dimensions: 2.77 x 1.24 x 1.79 m Total power consumption: kW Machine weight approx.: 2,850 kg Space requirement approx.: m Additional Information CNC sliding headstock automatic lathe Commissioned in 12/2005 The machine operated in single-shift use only, well-maintained, no service backlog, and in good condition. Equipment: - Bar feeder FMB Turbo 5-42/3200C, year of manufacture 2004 - High-pressure pump Iedpfx Aasx Uzcvo Nsal - Numerous collet chucks for main spindle - Various collets - Drive unit for synchronously driven guide bushing - Synchronously driven guide bushing - Drive unit for cross-driven spindle on linear carrier - Pick-off spindle - Collet chuck for pick-off spindle - Air blow-off device for pick-off spindle - 5 fixed tool holders at the rear - Workpiece unloading device - Coolant tank - Central lubrication - Door interlock - Ejector unit for workpieces with through-hole - Machine documentation Machine is sold without tools and extraction unit.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2006, Mesin bubut CNC GILDEMEISTER CTX 420 linear Dengan kontrol Siemens 840 D powerline Tahun pembuatan: 2006 Iedoxzt Dcopfx Aa Neal Diameter putar maksimum: 324 mm Panjang putar maksimum: 600 mm Diameter lingkar maksimum: 680 mm Lubang spindle: 79 mm Kecepatan spindle maksimum: 4.500 rpm Dilengkapi dengan aksesoris berikut: Pelindung geser dengan pencahayaan dalam Revolver 12 posisi dengan 12 stasiun penggerak Sumbu Y, sumbu C Perangkat pengukur alat Perangkat pengambil komponen Chuck hidrolik 3 rahang Ø 210 mm dengan pedal kaki Chuck collet hidrolik Hainbuch Barfeeder IRCO Breuning RBK 10012 Lampu sinyal Tailstock dengan pinol Konveyor serpihan Ekstraktor kabut oli Perangkat pendingin dengan pendinginan tekanan tinggi dan sistem filter sabuk Manual pengoperasian

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 9.000 h, berat keseluruhan: 6.100 kg, en Ijdpfx Aex Utwfsa Noal

Kondisi: bekas, Tahun pembuatan: 2007, Working area: 2780 x 1140 mm (vertical milling), 2500 x 950 mm (horizontal drilling). Travel path X-Y: 2980 x 1271 mm. Z-axis travel length: 200 mm. Clearance height: 180 mm. The machine base is a monolithic construction made from thick-walled steel, reinforced throughout the machine bed with welded-in triangular plates for exceptional stability. The triangular design, particularly with a broad base for load-bearing components, is key to ensuring long-term precision and rigidity. The machine layout allows users optimal workflow with minimal space requirements. This chassis design provides the machining unit with a balanced and secure foundation, enabling outstanding load distribution. The mobile aggregate carrier is constructed as a solid monoblock. It is positioned along the X-axis on precision-ground prism guides using recirculating ball carriages. The working unit, mounted on it, also travels on prism guides and recirculating ball carriages for robust performance. Description of aggregates and standard accessories Drilling unit: Drill head with 10 + 4 spindles: · 6 individually selectable vertical spindles in X · 4 individually selectable vertical spindles in Y · 2 horizontal spindles in X (1+1) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm · Power: 2.2 kW · Pitch: 32 mm · Drill holder: M10 with 11 mm centering · Extraction nozzle: D = 160 mm Vertical milling unit (Position 2): · Tool holder: HSK 63F · Speed: 1,500 – 24,000 rpm, infinitely variable via inverter · Motor power: 4.4 kW (6 HP) at 12,000 rpm (S1) Isdpfx Aex Twdyoa Noal · Clockwise/anti-clockwise operation · Ceramic bearings · Included: 4 tool holders (right-hand), without collet Tool changer: · Lateral tool magazine, 7-fold (TR7), fully enclosed against chip contamination · 7 tool slots for HSK 63F tool holders, arranged in a row · Max. tool diameter: D=120 mm · Max. weight per tool holder: 4.5 kg · Max. total tool weight (TR7): 20 kg · Angle heads can be accommodated Horizontal milling unit (Position 1): Horizontal unit with two opposing outputs for milling and grooving. · Speed: 9,000 – 18,000 rpm, infinitely variable via inverter · 1 output for collets 3-20 mm (ER32) · 1 output for saw/collet 3-12 mm (ER20) (for saw blade D=120 mm / bore 50 mm) · Motor power: 3 kW (4 HP) · Max. front milling tool diameter: 20 mm · Max. front milling tool length: 110 mm · Max. rear milling tool diameter: 12 mm · Max. rear milling tool length: 80 mm · Max. saw blade diameter: 100 mm · Saw blade bore (ER32): 50 mm · Saw blade arbor diameter (ER20): 12 mm Work table: The work table is designed to provide the operator with maximum freedom of movement. The vacuum quick-clamping system allows for highly flexible, precise positioning and optimal workpiece holding. · 4 supports, 900 mm, steplessly manually adjustable in X · 8 round vacuum cups, D = 110 mm, steplessly adjustable in Y (2 per support) · 2 stops in X (left/right) · 1 stop in Y per support (6 in total) · Retractable reference stops, CNC-controlled · Includes: 4 plug-in adapters for vacuum cups · Standard pendulum processing (2 working zones) Axis movement: The X, Y, and Z axes are driven via precision-ground recirculating ball screws of the highest accuracy. The X-axis ball screw is centrally located for maximum performance.

Kondisi: baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: B3170-0054, panjang pembubutan: 700 mm, kecepatan spindel (maks.): 3.500 rpm, jarak pergerakan sumbu X: 290 mm, jarak gerak sumbu Z: 750 mm, gerak cepat sumbu X: 20 m/menit, pergerakan cepat sumbu Z: 24 m/menit, tinggi total: 2.200 mm, panjang total: 5.000 mm, lebar total: 2.000 mm, diameter quill: 100 mm, berat keseluruhan: 7.000 kg, produsen pengendali: FANUC, model controller: SERIES 21i-TB, jumlah slot dalam magazin alat: 12, HYUNDAI - KIA SKT 250 M Mesin Bubut CNC - Tegangan operasi: 200/220 V - Frekuensi: 50/60 Hz - Arus nominal: 89 A - Daya terpasang: 27 kVA - Diameter pemesinan maks.: 410 mm - Diameter ayun maks. di atas eretan silang: 480 mm - Ukuran chuck: 254 mm - Diameter dalam spindle: 95 mm - Sumbu C: 0,001° - Termasuk tailstock, chuck collet HAINBUCH, revolver alat 12 posisi dengan stasiun alat penggerak, dan konveyor serpihan Isdpfx Ajx T Ac Usa Noal Perhatian: Barang harus diambil secara pasti antara 18 dan 26 Februari 2026, sesuai jadwal yang akan disepakati. FCA D-78087 Mönchweiler – dimuat ke truk

Kondisi: sangat baik (bekas), Dijual: Turbin pneumatik profesional GTV 1000 dari merek ternama Mannesmann Demag – asli, berfungsi, dalam kondisi sangat baik. - Spesifikasi teknis: • Kecepatan rotasi: 100.000 rpm • Sumber daya: udara bertekanan (sekitar 6 bar) • Konsumsi udara: sekitar 318 l/menit • Diameter spindle: 30 mm • Panjang total: sekitar 120 mm • Berat: hanya 210 g • Collet: 3 mm • Versi tanpa oli – pengoperasian bersih tanpa pelumasan - Mengapa memilih mesin ini? Iaodpjw Rd I Eefx Aa Nsl • Sangat ringan dan ringkas – ideal untuk pekerjaan berkelanjutan • Kualitas Jerman – bantalan presisi, tanpa getaran • Sempurna untuk deburring, mikro-frais, dan robotika • Tanpa oli – lingkungan kerja lebih bersih dan konsumsi material lebih rendah

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, Technical Details Max. workpiece diameter: 2-45 mm Max. workpiece width: 250 mm Max. module: 1.5 mm Min. module: 0.5 mm Control: Fanuc 18i-MB Total power requirement: kW Machine weight approx.: 2.2 t Space requirement approx.: 2100 x 1440 x 1700 mm Additional Information: The KOEPFER MZ 120 combined CNC gear hobbing and worm milling machine is characterized by its flexible application and is used for small module production. The simple pivoting of the milling spindle from horizontal to vertical position and selecting the corresponding operating mode on the CNC control converts the worm milling machine into a gear hobbing machine and vice versa. CNC Control: Fanuc 18i-MB (Dialog/ISO) CNC axes: X-axis: Plunge axis Z-axis: Longitudinal axis C-axis: Workpiece spindle B-axis: Tool spindle V-axis: Loader axis, longitudinal A-axis: Swivel axis of the tool spindle head (available as option) Y-axis: Shift axis (available as option) With the following machining programs: Worm milling Gear hobbing Worm hobbing Bevel gear and spur gear milling Bevel gear hobbing Milling cycles: Straight, helical, crowned gears Radial, radial-axial, climb and conventional milling Roughing, finishing Worm gears Straight-toothed bevel gears, face gear cutting (option only in partial process) Worms [Equipment] Coolant tank 300 liters with LNS Turbo MS 250 chip conveyor Retrofitted and from year 2021!!! Kraft und Bauer fire extinguishing system Helical parts feeder Machine documentation [Technical Data] Workpieces: Workpiece diameter: 2-45 mm Max. workpiece length: 250 mm Gear cutting length: 150 mm Max. module in steel: 1 mm (gear hobbing) 1.5 mm (worm milling) 0.5 mm (bevel gear hobbing) Tools: Cutter diameter: 16-32 mm (gear hobbing) 40-63 mm (worm milling) Machine: Max. setting angle of milling head: Iodpfx Aaox Ux Suo Njal +/- 45° (hobbing) +/- 30° (worm milling) Shift travel: 34 mm (manual adjustment) 34 mm (CNC axis) Collet/retraction arbor W 20 Max. speed of workpiece spindle: 770 rpm Milling spindle drive: 0.55 kW Max. speed of milling spindle: 8,000 rpm Axis drives: X-axis (plunge) / travel: 80 mm CNC-controlled Z-axis (longitudinal feed) / travel: 190 mm CNC-controlled C-axis (workpiece axis) CNC-controlled Rapid traverse: X-axis: 6,000 mm/min Z-axis: 6,000 mm/min Hydraulic unit: 0.37 kW

Kondisi: baru, Tahun pembuatan: 2020, CNC engraving machine MÜLLER LCF - 2 Travel paths: X 375 mm, Y 570 mm, Z 90 mm Technical data: Table size: 700 mm x 480 mm Weight: 50 kg Iodpjf Tnf Uofx Aa Noal External dimensions: Length: 700 mm, Width: 500 mm, Height: 350 mm Accessories: - Computer - Monitor - Keyboard - Mouse - Software - Controller - Kress milling spindle - Vacuum pump - Spray mist valve Includes various collets and milling cutters - NEW

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jam operasional: 17.050 h, jarak pergerakan sumbu X: 670 mm, jarak lintasan sumbu Y: 830 mm, jarak gerak sumbu Z: 600 mm, berat keseluruhan: 20.000 kg, kecepatan spindel (maks.): 18.000 rpm, jumlah sumbu: 5, This 5-axis POSmill H 800 U was manufactured in 2012. It features a Heidenhain iTNC 530 control, a new spindle installed in 2021 with only 5,700 operating hours, and a robust spindle speed of 18,000 rpm. The machine offers a large travel range with dimensions of 670/830/600 mm and accommodates 96 tool stations. Additional features include through-spindle coolant supply with 60 bar, a comprehensive coolant system, and a chip conveyor. Take advantage of this opportunity to purchase a POSmill H 800 U universal machining center. Contact us for further information. Additional equipment: • New spindle since 2021: only 5,700 spindle hours (spindle replaced due to wear) • Inspection under power possible Advantages of the machine Technical features: • Air supply through the spindle • Internal coolant supply: 60 bar • Coolant system with 1,000 l paper belt filter • Rotating viewing window • Chip flushing gun // bed flushing • Oil mist extraction • Blum tool breakage detection/measurement • Heidenhain 3D touch probe • Mobile electronic handwheel • Kinematic package Additional information: Isdpox D Dx Aofx Aa Njal Spindle replaced due to wear (new spindle: 5,600 hours since 2021) Production hours: control on: approx. 33,300 hours, spindle on: 17,050 hours (new spindle 5,600 hours, replaced in 2021 due to wear) Tool stations: 96 Including tool holders (shrink chucks, collets, etc.)

Kondisi: bekas, Tahun pembuatan: 2006, en Iaodpfox Twccjx Aa Njl

Kondisi: baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: M303004, panjang pembubutan: 780 mm, tinggi total: 2.700 mm, panjang total: 5.000 mm, lebar total: 2.700 mm, berat keseluruhan: 12.000 kg, produsen pengendali: FANUC, model controller: SERIES 18 i-TB, NAKAMURA-TOME WT-300 CNC Lathe - Operating Voltage: 200/220 V - Frequency: 50/60 Hz - Main Switch: 300 A - Transformer: 93.4 kVA - Max. Diameter Upper Side: 199 mm - Max. Diameter Lower Side: 270 mm - Distance Between Spindle Heads: max. 1,100 mm / min. 250 mm - Max. Bar Capacity: 102 mm (left side), 65 mm (right side) - Chuck Size Left Side: 305 mm, Right Side: 210 mm - Turret Force (X-Axis): X1: 11,000 N, X2: 11,000 N - Turret Force (Z-Axis): Z1: 9,000 N, Z2: 6,000 N - Turret Force (Y-Axis): 6,000 N - Travel X1: 152 mm, X2: 195 mm - Travel Z1 + Z2: 780 mm - Travel Y-Axis: ±40 mm - Travel B2-Axis: 850 mm - Spindle Speed: 2,500 rpm - Spindle Bore: 120 mm - Front Bearing Inner Diameter: 160 mm - Draw Tube Hole: 103 mm - Spindle Center Height: 1,228 mm - Spindle Speed R: 4,500 rpm - Spindle Bore: 80 mm - Front Bearing Inner Diameter: 110 mm - Draw Tube Hole: 66 mm - Spindle Bearing: 2-point - C-axis - Rapid Traverse Speed: 600 rpm - Cutting Feed Rate: 1 – 4,800°/min - Upper Turret: 12-station turret - Total Number of Tool Stations: 24 - Number of Turret Positions: 24 - Turret Head Outside Diameter: 406 mm - Turret Thickness: 100 mm - Tool Clearance: 641 mm - Turret Clamping Force: 30 kN Iajdpfjx Tzp Tjx Aa Nel - Tool Dimensions: 20 and 25 mm - Boring Bar Mounting Hole Diameter: 25/32 mm - Lower Turret Type: 24-station turret - Turret Head Outside Diameter: 365 mm - Turret Thickness: 100 mm - Tool Clearance: 600 mm - Tool Dimensions: 20/25 mm - Driven Tool Spindle on Upper and Lower Turret - Spindle Speed: 3,600 rpm - Number of Spindle Speed Ranges: stepless - Number of Tool Positions: 12 - Tool Holder Types and Sizes: Longitudinal Holder: 20 mm, Cross Holder - Longitudinal Threading Holder: M3 – M10 - Cross Threading Holder: M3 – M10 - Cutting and Traverse Speed X1 and X2: 16,000 mm/min - Cutting and Traverse Speed Z1 and Z2: 27,000 mm/min - Cutting and Traverse Speed B2-Axis: 27,000 mm/min - Cutting and Traverse Speed Y-Axis: 6,000 mm/min - Cutting Feed Rate X1 and X2: 1 – 4,800 mm/min - Cutting Feed Rate Z1 and Z2 Axis: 1 – 4,800 mm/min - Cutting Feed Rate B-Axis: 1 – 4,800 mm/min - Cutting Feed Rate Y-Axis: 1 – 4,800 mm/min - Including the tool holders shown in the photos as well as both HAINBUCH collets in the main and sub-spindles - Also including chip conveyor and transformer - With documentation Attention: The item must be collected—binding date to be agreed—between 18 and 26 February 2026. FCA D-78087 Mönchweiler, loaded onto truck.

Kondisi: sangat baik (bekas), Dijual: holder alat profesional SK40 ER40 dari produsen ternama, termasuk Diebold dan ZÜRN – Jerman. Holder lengkap, sebagian dilengkapi collet dan perkakas (mata bor, endmill, tap). Tipe holder: SK40 – ER40. Model antara lain: TC40xER40x70-AD. Produsen: Diebold / ZÜRN Jerman. Kondisi sangat baik, fungsi teknis tanpa kendala – siap pakai. Presisi konstruksi tinggi, kualitas premium khas Jerman. Aplikasi: pusat pemesinan CNC, mesin frais, bengkel alat. Isdpfx Ajxcbxqea Nsal

Kondisi: baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, en-technical-details-cnc-turning-milling-center-9-axis Iaedpfxox Uxdqo Aa Nol

Kondisi: baru, The UWF 1.1 is a powerful conventional milling machine from the group of universal milling machines, distinguished by its large clamping table and a robust, swiveling universal milling head. This milling head can be tilted in two planes and positioned horizontally, enabling a wide range of applications in single-part production, repair, and training. Thanks to the heavy machine frame with precisely adjustable, backlash-free dovetail guides on all axes, the UWF 1.1 offers high stability and accuracy. Furthermore, the gear-driven automatic feed on the X and Y axes allows for efficient operation. In the Z direction, the motorized rapid traverse vertical adjustment enables quick adaptations. The comprehensive standard equipment includes a 3-axis position display, an arbour support for horizontal milling, and several collets. Use the UWF 1.1 for your machining needs with reliable KNUTH quality, and request your quotation today. Iajdpfowub Acjx Aa Nel

Tahun pembuatan: 1997, Kondisi: siap digunakan (bekas), jumlah sumbu: 4, This 4-axis KELLENBERGER Kel-Varia UR 175/1000 was manufactured in 1997. It features an internal grinding unit with a swiveling B-axis and a C-axis for non-circular grinding, complemented by a belt filtration system. Consider the opportunity to purchase this KELLENBERGER Kel-Varia UR 175/1000 cylindrical grinding machine. Contact us for further information. Iodpjx T Dg Iefx Aa Neal Additional Equipment • Belt filter system Machine Advantages Technical Machine Advantages • Internal grinding unit with B-axis for swiveling grinding head and C-axis for non-circular grinding Additional Information Center height x Distance between centers: 175 x 1,000 mm Supplied complete with standard accessories, electrical equipment For three-phase current 3 x 400 Volt, 50 Hz. Machine color: DARK GREY NCS 7502B combined with BLUE NCS KEL-ASSIST 90 PLUS software package Internal grinding unit with 80 mm diameter collet chuck Right-hand side grinding wheel adaptor, 400 x 50 mm diameter Oil mist lubrication system for HJN spindles Micrometric adjustment of the tailstock Three-jaw chuck with face spiral, 160 mm diameter Dressing device on the top table Swiveling diamond holder 9.5 mm MOVOMATIC infeed sensor Set of vibration-damping pads Initial fill set of lubricants CNC-controlled C-axis

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 352 mm, jarak gerak sumbu Z: 250 mm, kecepatan rotasi (maks.): 5.000 rpm, model controller: Fanuc Series 0i Mate-TD, Perlengkapan: konveyor serpihan, RINCIAN TEKNIS Diameter putar di atas penahan alat: 70 mm Perjalanan sumbu X: 352 mm Perjalanan sumbu Z: 250 mm Iasdpex E Uzmefx Aa Nsl Posisi alat: 8 Lubang tembus: 42 mm Putaran maks.: 5.000 rpm RINCIAN MESIN Kontrol: Fanuc Series 0i Mate-TD PERLENGKAPAN Dokumentasi mesin Chuck hidrolik D135 mm Adaptor collet 173E Penangkap benda kerja Konveyor serpihan

Kondisi: baik (bekas), Technical Data: Travel distances: Longitudinal X-axis 762 mm Cross Y-axis 305 mm Vertical Z-axis 406 mm Quill travel 127 mm Spindle Mount Collet chuck Table size 1067 x 229 mm Speed range 50–3750 rpm, two speed ranges Weight 1000 kg Equipment: - SONY digital readout, 2 axes (X and Y axis) - Machine lamp - Drill chuck 0–13 mm Iajdpfx Aaow Ebhmj Njl - Collet chuck set - Machine vice, jaw width 150 mm - Safety guard, electrically interlocked, Type: ZE-FS 30-300, fully mounted - Documentation Condition: good, workshop tested

Kondisi: sangat baik (bekas), ///// HARGA TERTERA UNTUK 1 UNIT ///// Penjualan satuan holder SK40 ER32 merek ternama ZÜRN – Jerman. Holder dijual lengkap, dilengkapi collet dan alat yang terpasang (mata bor atau end mill – sesuai foto). Tipe holder: SK40 / TC40 ER32x70 AD/B. Collet: UMQ / ER32 – ZÜRN Germany. Paket termasuk alat – bor/end mill (HSS, VHM, beberapa dengan lapisan TiN). Kondisi sangat baik – siap pakai. Konstruksi kokoh buatan Jerman. Ideal untuk pusat mesin CNC dan bengkel peralatan. Iedpoxcbvpofx Aa Neal

Kondisi: baru, The KNUTH UWF 3.2 is a high-performance universal milling machine in the "Conventional Milling Machines" category and belongs to the "Universal Milling Machines" group. This versatile machine offers a generous working area, a flexible universal milling head, and a horizontal spindle, all well-known features from the proven UWF 3 series. The UWF 3.2 simplifies your machining tasks with its extended speed range and steplessly adjustable servomotor feed. Robust characteristics such as the rigid frame made of HT-200 cast iron and the precision ground guideways ensure precise results and smooth operation. The 3-axis position display system and comprehensive accessories, including a collet chuck and coolant system, make it the ideal choice for workshops and training facilities. Whether for manufacturing or repair tasks, the ability to position the main spindle at almost any angle significantly increases flexibility. Secure your KNUTH UWF 3.2 and request a quote for this exceptional machine today. Isdsuyh Alepfx Aa Njal

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jam operasional: 14.063 h, kecepatan spindel (maks.): 7.000 rpm, daya motor spindle: 11.000 W, jumlah sumbu: 6, en-GB Iajdpfx Asx D Ep Nja Nol

Kondisi: sangat baik (bekas), Dijual holder/pemegang alat lengkap GARANT SK40-10-50 dengan end mill monolitik VHM terpasang. Produk merek ternama Hoffmann Group Germany, siap digunakan langsung pada pusat pemesinan CNC. • Tipe pemasangan: SK40 (DIN 69871) • Ukuran collet: Ø10 mm • Panjang: 50 mm • No. katalog: 300100.10 • Penyeimbangan: G2.5 hingga 25.000 rpm • Set termasuk: end mill monolitik VHM Ø10 (berbagai tipe – terlihat di foto) • Ideal untuk pengerjaan baja, baja tahan karat, besi cor, dan paduan logam • Kondisi sangat baik – sudah diuji, siap pakai. Holder GARANT menawarkan kualitas penjepitan tertinggi dan presisi pengerjaan pada kecepatan tinggi. -- HARGA TERTERA PER 1 UNIT -- Isdpfx Aaow Sy Ahj Noal

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 12.981 h, berat keseluruhan: 6.200 kg, en Iasdpex Tv Tyjfx Aa Nel

Kondisi: sangat baik (bekas), Holder merek ternama GARANT (Hoffmann Group) – jaminan kualitas dan keandalan tertinggi untuk pemrosesan CNC. Model SK40-12-50, nomor katalog 300100 12. • Kerucut SK40 – standar industri untuk pusat pemesinan • Diameter penjepit Ø12 mm • Panjang holder 50 mm • Kecepatan maksimum 25.000 rpm • Presisi tinggi dan keseimbangan dinamis • Cutter end mill terpasang pada holder Kondisi sangat baik, siap langsung digunakan. Alat profesional untuk mesin milling CNC, ideal untuk bengkel yang mengutamakan kualitas dan keandalan. -- HARGA UNTUK 1 PCS -- Iaedpew Sy Anjfx Aa Njl

Kondisi: sangat baik (bekas), For sale: robust WEMAS column milling machine, model FM23. Rigid cast iron construction — ideal for toolrooms and maintenance workshops. Machine is fitted with a 3-axis DRO D60-3V digital readout system and Rascher Nürnberg–München linear scales. Table with longitudinal T-slots, coolant system with separate tank and pump. Vertical spindle with precision collet and adjustable feed. Power supply 3×400 V. Complete machine, after current maintenance inspection, runs smoothly, ready for power-on tests. Normal signs of use; no excessive play or defects. Included in price: 3-axis DRO display, linear scales on X/Y/Z axes, coolant tank and pump, cables, power roller, work light. Additional details from photos: "WEMAS" and "FM23" nameplates, spindle adjustment correction plate, DRO panel with mm/inch, ABS/INC, calculator functions. Working parameters, spindle taper, and speed ranges to be confirmed on site – I can measure table dimensions and X/Y/Z travels upon request. Iodpfx Ajw I Hzpsa Nsal Forklift loading available. Assistance with transport logistics provided.