Beli Debu Penghapusan bekas (1.702)

Kondisi: bekas, Tahun pembuatan: 2015, Technical details: Chjdpol Ha Ubefx Anzjb Machine weight approx.: 4 t

Kondisi: baru, en-GB Csdpfx Aek Uqhaenzjhb

Kondisi: bekas, Deburring machine, hole deburrer, bore deburrer, deburring device - Drive power: 0.30 kW - Countersink - Speed: 585 rpm - Dimensions: 500 x 300 x H460 mm Cedpob U Izpsfx Anzshb - Weight: 31 kg

Kondisi: baru, Diameter -- mm Workpiece width -- mm Cjdpfx Ansr I E Exezshb Workpiece length -- mm Chamfering System UZ30 EXPRESS Maximum chamfer width 30 mm with automatic feed Stationary UZ30 EXPRESS is one of the best solutions for chamfering both large and small batches, as well as smaller workpieces or long, narrow flat bars. The UZ30 EXPRESS can be used not only for chamfering but also for deburring. Thanks to the unique geometry of the milling cutter, the feed rate can be set up to 3.5 m/min. For longer workpieces, the machine can be equipped with an additional infeed and outfeed table, expanding the working surface to an impressive 2,824 mm. - The machine is designed for chamfering steel, aluminium, copper, and other materials such as flat bars, pipes, and welding bevels - High-quality milling ensures mirror-finish surfaces - Feed control via rotary knob - Cutter speed is regulated by frequency inverter - Additional optional accessories available for pipe chamfering - Option to extend the worktable to a total of 2,824 mm - Fast and precise machine adjustment via gauge Technical data: Approximate maximum chamfer widths: at 30° - 30 mm / at 45° - 20 mm / at 60° - 17 mm Adjustable bevel angle: 30° - 60° (stepless) Sheet thickness range: 3 - 100 mm Pipe chamfering: OD 102 mm - OD 156 mm Milling motor power: 4,000 W Milling head speed: Adjustable by frequency inverter Feed rate: 0.6 – 3.5 m/min Weight: 400 kg Dimensions: 825 x 1,200 x 1,615 mm Number of indexable inserts: 5 pieces

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Boschert brushing deburring machine Model K3 For deburring straight sheet metal edges and on the side unit Suitable for cutouts and notches up to 70 mm depth as well as for outer radii on sheets. - 3 motors, each 1.5 kW - Brush diameter: 300 mm - Brush material: stainless steel/steel wire brushes Chedotr Aviepfx Anzob - Material thickness range: 0.8–8 mm Machine dimensions: - Width: 1400 mm - Height: 580 mm - Depth: 670 mm - Base frame height: 800 mm (working height 920 mm) - Table support: 200 x 1400 mm Sheet hold-down as sheet guide The sheet edge is deburred simultaneously from above and below as it is passed through. For heavy burrs, the motors can be switched to run together so that both remove the heavy burr from above. The 3rd (side) unit is used for deburring external contours and can be switched on separately. A larger side table support is provided as a storage surface.

Kondisi: baru, Diameter -- mm Workpiece length -- mm Workpiece width 0 - 3 mm Spindle speeds 3600 rpm Chodpfjppgcrox Anzeb Angle range 30 - 60° (continuously adjustable) Machine weight approx. 31 kg Space requirement approx. 530 x 420 x 410 mm Maximum chamfer width of 3 mm – Mechanically adjustable chamfer angle Designed for deburring and chamfering steel parts and workpieces. Suitable for processing various materials. Robust and stable machine construction. * Scale for setting machining depth * Safety cover * Adjustable processing angle * Suitable for steel, stainless steel, aluminum, and other materials * Precise, heavy-duty, extra-long mechanical guide - Number of indexable inserts: 5 pcs. (four cutting edges) - Feed: manual

Kondisi: baru, Diameter -- mm Workpiece length -- mm Workpiece width 0 - 20 mm Spindle speeds 2850 rpm Angle range 0 - 60° (steplessly adjustable) Machine weight approx. 19.5 kg Chedjppgcvepfx Anzsb Maximum bevel width 20 mm + face side machining Designed for beveling and deburring straight edges, for so-called FACING – removing an unwanted layer of material from the face end of the workpiece, e.g. resulting from oxy-fuel cutting on sheet metal. Specifically developed for visible bevels and weld seam preparation. Powerful electric drive for extreme loads. * High-performance motor * Stepless adjustment of the working angle within the range of 0° - 60° * FACING – edge machining at an angle of 0° for removing undesirable layers after oxy-fuel cutting * Unique mechanical scale for setting the bevel width for higher precision * Very compact and ergonomic design for high productivity * Surrounding protective frame to prevent damage and provide versatile gripping options * With appropriate accessories, pipes from D=150 mm can also be processed * Additional adjustable handle - Bevel width (hypotenuse): 0 - 20 mm = 400 MPa / 0 - 16 mm = 400 MPa - Motor: 1100 W We can optionally offer you a pipe beveling device (D=150mm) for this machine.

Kondisi: bekas, raddurchmesser-300mm Chsdpfxsxu Nttj Anzsb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, Data Umum Berat mesin: 5.300 kg Chjdpfx Anox D S A Nezob TIMESAVERS 41serie 900 WRD N ini diproduksi pada tahun 2006. Memiliki lebar kerja 900 mm dan dapat menangani ketinggian pengamplasan hingga 60 mm. Meja dapat diatur dari 0 hingga 80 mm, sehingga mendukung beragam ukuran material. Ideal untuk aplikasi deburring yang konsisten. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Mesin pengerjaan plat jenis lain

Kondisi: sangat baik (bekas), Dijual: mesin pemoles industri (deburring) dari perusahaan Jerman Rolei Eisenblätter GmbH, model PEF 500. Perangkat ini dirancang untuk penghilangan gerinda secara presisi, chamfering, dan persiapan tepi pada detail baja, aluminium, maupun logam lain. Produsen: Rolei Eisenblätter GmbH, Jerman Model: PEF 500 Konstruksi baja yang kokoh Cjdpfx Anow R E Hpjzehb Meja kerja berbentuk V, ideal untuk pemanduan benda kerja Penggerak listrik dengan saklar pengaman Penggunaan: pemrosesan tepi, chamfering, persiapan kampuh las, penghilangan gerinda setelah pemotongan dan pemrosesan Mesin dalam kondisi kerja baik dan teknis yang bagus. Konstruksi sangat stabil, ideal untuk bengkel, pabrik pengelasan, pembuatan alat, serta produksi massal.

Kondisi: baik (bekas), Tahun pembuatan: 1991, nomor mesin/kendaraan: ST-B-1661, 24154 Technical Data: - Brush diameter: 250 mm - Brush width: 60 mm - Disc speed: 1500 / 3000 rpm - Drive: 400 V / 1.0 / 1.4 kW - Working height: 900 mm Chedjtwmv Eepfx Anzsb - Space requirement approx.: W 650 x H 1150 x D 450 mm - Weight approx.: 100 kg

Kondisi: bekas, Mesin deburring sikat, diduga BAUER Tahun pembuatan: sekitar 1985 Diameter sikat: 250 / 300 mm Lebar sikat: 20 - 60 mm Kecepatan: 1500 / 3000 rpm Daya: sekitar 2 / 3 kW Koneksi listrik: 380 Volt, 50 Hz - dengan dudukan meja Kebutuhan ruang (P x L x T): 700 x 600 x 1250 mm Codpfxjxrgupo Anzehb Berat: 120 kg Kondisi baik

Kondisi: bekas, Tahun pembuatan: 2002, Rincian teknis: Chodpfjxc E Icox Anzob Diameter roda - maks.: 40-200 mm Kebutuhan daya total: 31,3 kW Berat mesin kurang lebih: 4 t Kebutuhan ruang kurang lebih: 1,8 x 2,2 x 1,8 m

Tahun pembuatan: 1995, Kondisi: bekas, Diameter 0 mm Workpiece length 1000 mm Workpiece width 875 mm Cjdpfet Hwu Nex Anzjhb CNC deburring cell, with 2 pallets / 10 workpieces / 510 - 5 axes CNC - SIEMENS 510 controlled flexible brushing and deburring centre

Tahun pembuatan: 1975, Kondisi: bekas, Wheel diameter – max. 280 mm Number of teeth – max. 100 Module – max. 6 Module – min. 1 Total power requirement: 6 kW Machine weight approx. 2,500 kg Space requirement approx. ___ m HURTH Automatic gear edge milling machine for universal use in deburring and chamfering of gears Type ZK 7 – Year of manufacture 1975 – Serial no. 26 000 Max. workpiece diameter: approx. 280 mm Workpiece length: approx. 200 mm Module range for deburring: 1–6 module for chamfering: 1–4 module Workpiece tooth count: 6–100 Workpiece spindle bore: 102 mm Horizontal adjustment of workpiece head: approx. 340 mm Cjdpfxot Hw Dke Anzjhb Vertical adjustment of milling slide: 180 mm Swiveling of milling slide: 105° Cross adjustment of milling slide: approx. 300 mm Cutter speeds: 250–2,800 rpm Cutter stroke rates: 30–210 per min. Cutter stroke adjustable: 6–12 mm Milling spindle mounting: 40 SK Total drive: approx. 6 kW, 380 V, 50 Hz Weight: approx. 2,500 kg Accessories / Special equipment: • Electric workpiece clamping device with collet chuck system, device for expanding mandrels, and standard workpiece holder, large quantity of clamping tools included. Foot switch for clamping release. • Mechanical dividing device for number of teeth with approx. 20 different index plates. • Adjustable tooth gap centering mechanism mounted on the workpiece head. • Mechanical collet chuck fitted to the tool head for various cutter diameters and types (form, face, shell end mills, etc.). Approx. 50 different used and new cutters of all kinds included. • Hydraulic working stroke of the tool spindle towards the workpiece, with attached hydraulic unit. • Workpiece counter. Condition: good – ready for demonstration, very interesting due to extensive accessories. Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to your order. We have approx. 100 other gear cutting machines available in stock. Please contact us for more information.

Kondisi: bekas, Tahun pembuatan: 2007, Working width 1380 mm Workpiece height 70 mm Total power requirement 45 kW Machine weight approx. 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding unit Type EM 5 N/II/L + 2 B/1400 Year of manufacture 2007 Serial no. 780063 Cjdpfxot Hw Iis Anzshb _____ Grinding width approx. 1,380 mm Roller width 1,400 mm Max. workpiece height 1 - 70 mm Continuously adjustable feed speed approx. 1.5 - 8 m/min Comprising 5 working units: Oscillating sanding roller for use with abrasive cloth (abrasive fleece) Ø 450 mm, 1,400 mm wide x 1,540 long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts Ø 350 mm, drive 2 x 5.5 kW, abrasive flap wheels or non-woven abrasive, adjustable for wear. Brush roller unit to accommodate 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via hand wheel, also ideal for removing oxide layers. Wet grinding unit with belt filter and closed water circuit, installed under the transport belt and easily extendable from the machine. Washing and drying device, designed for a minimum workpiece length of 80 mm, water and air supply adjustable, etc. Workpiece transport is front-sided via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system over a width of 300 mm on the right as well as a magnetic belt with a width of 300 mm, for holding small parts down to a minimum length of 80 mm. Frequency inverter for stepless speed adjustment of the abrasive flap brushes from 250 – 1,000 rpm (position 2 top), as well as for the conveyor feed. Control panel with clear controls and digital readout of roller adjustment, 4 ammeters for monitoring roller drives, control LEDs. Quick-change facility for lateral removal of abrasive flap brushes, as well as various spare rollers with abrasive fleece and brush fittings. Total drive approx. 45 kW – 400 V – 50 Hz Weight approx. 5,500 kg Condition: good to very good Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Kondisi: bekas, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SN075360, Garansi 12 bulan. Chedpfxjzldume Anzob

Kondisi: baru, Tahun pembuatan: 2026, Max. working width: 1350 mm Processable sheet thickness: 0.5 - 80 mm Variable feed rate: 0.5 - 6 m / min Abrasive belt dimensions: 1910 x 1350 mm Chsdjygx A Nepfx Anzsb Brush element dimensions: 300 x 400 mm Abrasive belt speed: 12 m / s Number of planetary head units with brushes: 8 pcs. Brush element speed: 8-26 m / s Brush element rotation speed: 1-15 rpm Thickness adjustment precision: 0.01 mm Length: 3800 mm Width: 2300 mm Height: 2400 mm Machine weight: 5500 kg Total connected load: 49.5 kW Standard Equipment Machine configuration: 1st station: abrasive belt, 2nd station: brush elements Main components: PLC: Siemens Touchscreen: Siemens Low-voltage devices: Schneider Frequency converters: Schneider Exhaust fan: Elektror, Germany Total connected power: Abrasive belt motor: 15 kW Brush motor: 11 kW Infeed conveyor motor: 4 kW Vacuum suction motor: 15 kW Frequency converter for rotating brushes: 15 kW Optional equipment Optional infeed system: 1. Infeed via strong permanent magnet adsorption conveyor (suitable for steel workpieces. Workpiece size ≥ 30 mm × 30 mm) 2. Infeed via vacuum negative pressure adsorption conveyor (suitable for stainless steel sheets, copper sheets, aluminum sheets, etc. which cannot be magnetically adsorbed. Workpiece size ≥ 50 mm × 50 mm)

Kondisi: bekas, Tahun pembuatan: 2022, 2 x 400 mm pita magnet, EMZR, kompensasi keausan alat EE Chedpfx Aszd Nwdenzjb

Kondisi: bekas, Tahun pembuatan: 2024, jam operasional: 26 h, nomor mesin/kendaraan: SN064871, Opsi: Cjdpfozdcxcex Anzohb - Chip RFID LiServ 4.0 - Paket pengukuran energi Balluf Smartlight ME 5000 - Pemindai Barcode

Kondisi: bekas, Tahun pembuatan: 2008, Fungsionalitas: belum diuji, Perlengkapan: dokumentasi / manual, de-to-hu-it-lt-lv-nb-nl-pl-0001 Codsy U Dyqspfx Anzehb

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Seri Timesavers 22-1100-WTBTB Codpfxeznlxre Anzohb Seri 22-1100-WTBTB dengan lebar pemrosesan 1100 mm dan bukaan meja 0,8-100 mm, dengan 3 stasiunnya, ideal untuk memproses komponen yang dipotong laser, dipotong dengan cetakan, dipotong dengan jet air, atau dipotong dengan plasma. Dengan stasiun pengamplasan sabuk, percikan dan duri yang menonjol dapat dihilangkan. Selanjutnya, dengan menggunakan sikat piring, tepi diratakan dan sedikit dibulatkan. Untuk mencapai hasil yang seragam, kami menggunakan dua stasiun sikat yang berosilasi di mana sikat piring berputar ke kiri dan ke kanan secara bergantian. Berkat sistem penggantian cepat untuk sabuk dan sikat, mesin dapat disiapkan ulang hanya dalam beberapa langkah. Karpet pengangkut, serta semua stasiun lainnya, dikendalikan frekuensi, sehingga kecepatan dapat diatur secara bertahap.

Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, Seri Timesavers-10 Seri 10 dilengkapi dengan kepala yang dapat diputar, serta memiliki sisi untuk penggantian cepat cakram pengamplasan. Pada sisi ini, kami mengamplas bagian yang menonjol dan sisa-sisa material yang kasar. Sisi kedua memiliki dudukan untuk sikat berlamela, yang digunakan untuk membulatkan tepi dan memberikan hasil akhir. Berkat berbagai pilihan alat, Seri 10 adalah alat serbaguna yang cocok untuk menghilangkan duri, membulatkan tepi, mengamplas halus, dan menghilangkan kerak yang berat. Kepala yang dapat diputar 180° memungkinkan penggantian alat yang cepat dan mudah. Mesin ini dilengkapi dengan sistem vakum, dan kecepatan motor dapat diatur secara bertahap. Mesin ini sangat fleksibel, dilengkapi dengan roda untuk memudahkan pemindahan, dan berkat pengoperasiannya yang sederhana, menjadi mesin yang mudah digunakan dan dapat diakses oleh siapa saja. Codpfx Anjznlyvjzehb

Kondisi: baru, condition: new delivery time: approx. 12 weeks from order country of origin: Italy price: €153,200 leasing rate: €2,895.48 working width: 1,350 mm sheet thickness range – mild steel: 0.4 – 120 mm abrasive belt dimensions: 1,370 x 2,200 mm extraction capacity: 6,000 m³/h extraction connection diameter: 150 mm compressed air connection: 6 bar length: 4,200 mm width: 2,300 mm height: 2,350 mm weight: 4,200 kg EQUIPPED WITH 2 WORKING GROUPS: 1 X ABRASIVE BELT AND 1 X BRUSH UNIT, TOP SIDE * The machine is constructed of welded and normalized steel to ensure a stable and rigid structure. * Working table with motorized height adjustment, made possible by the synchronized movement of 4 screws. * Independent motors arranged inside the structure with emergency brakes. * Dust extraction hoods located inside the machine. The control panel includes: * Automatic star-delta starter for main motors * Digital display for material thickness with decimal tolerance * Thickness adjustment with control (+/- 0.1 mm) * Alarm monitoring center with instant visualization of emergencies and/or faults. FEED UNIT * Table made of solid metal construction with ground and wear-resistant sliding surface. * Modified structures for vacuum systems available on request * The table raises and lowers from 780 mm up to a maximum height of 950 mm above the floor. The motor power for table height adjustment is 0.25 kW. * Maximum permissible load on the table: 140 kg. * Variable feed speed with inverter, from 0.4 to 4.5 m/min; option of 0.2 to 2.0 m/min or 0.6 to 6.0 m/min. * Conveyor belt made of special natural rubber, oil and heat resistant, with automatic centering system. * Side guides that prevent the conveyor belt from lifting. * Rubberized pressure rollers, oil and heat resistant, installed before and after each working group. * Automatic centering device for the conveyor belt * Automatically servo-cooled motor * Feed speed control via the main touchscreen. 1ST GRINDING UNIT WITH ABRASIVE BELT * Precision-ground and balanced contact roller, 180 mm diameter. Coated with oil- and heat-resistant nitrile rubber. Standard roller hardness 55° Shore. Mounted on an eccentric shaft, allowing the working position to be controlled and compensating for abrasive belt wear over an 8 mm range. This system is managed by a pneumatic cylinder, which enables the automatic engagement of the unit for operation and, in case of emergency and/or machine stop, the immediate withdrawal of the belt from the working area. It is possible to use both abrasive belts and/or Scotch Brite. * Pneumatic On/Off switch. * Roller adjustment (up/down) “grit” stroke 10 mm * Variable speed motor 11 kW, with automatic braking in case of emergency. * Rotation speed in feed direction: 4 – 18 m/s. * Adjustable width and duration of oscillation. Cjdpfx Asynmw Renzshb * Pneumatic abrasive belt tensioning system; LED display for wear monitoring. * Abrasive belt centering system, with electronic photo eye display, adjustable for amplitude and intensity of oscillation. 2ND ROTARY BRUSH UNIT * Comprising 8 deburring brushes: 4 clockwise, 4 counterclockwise. * Each brush has a diameter of 350 mm and...

Tahun pembuatan: 2014, Kondisi: siap digunakan (bekas), A deburring system (deburring cell) for finishing metal workpieces using a fettling robot is available. Documentation is provided. An on-site inspection is possible. Chedpfx Anjwfg Huszob