Beli Deckel Fp 1 bekas (691)

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 300 mm, jarak lintasan sumbu Y: 160 mm, jarak gerak sumbu Z: 340 mm, kecepatan spindel (maks.): 2.000 rpm, kecepatan spindel (min.): 40 rpm, kecepatan rotasi (maks.): 2.000 rpm, kecepatan rotasi (min.): 40 rpm, 2-axis digital readout display (Heidenhain) Spindle taper: SK40 (S20x2) Travel distances: X 300 / Y 160 / Z 340 mm Ihodpfxjvnr Hye Aa Net Speed range: 40 - 2000 rpm (2 speed gearbox stages) Feed rate steplessly adjustable The machine is in well-maintained condition and can be inspected under power on site. Includes comprehensive accessories: - Machine vice - Operating manual / electrical circuit diagram / spare parts list - Collet set (S20x2) incl. SK40 collet chuck - Further accessories available on request.

Kondisi: siap digunakan (bekas), Fungsionalitas: fungsi terbatas, nomor mesin/kendaraan: 2832-1076, panjang pemakanan sumbu X: 560 mm, panjang umpan sumbu Y: 500 mm, panjang umpan sumbu Z: 390 mm, jarak pergerakan sumbu X: 560 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 390 mm, kecepatan pemakanan sumbu X: 4 m/menit, laju pemakanan gandar Y: 4 m/menit, laju pemakanan sumbu Z: 4 m/menit, kecepatan spindel (maks.): 4.000 rpm, kecepatan spindel (min.): 40 rpm, gerak cepat sumbu X: 4 m/menit, pergeseran cepat sumbu Y: 4 m/menit, pergerakan cepat sumbu Z: 4 m/menit, tinggi total: 2.265 mm, lebar total: 2.410 mm, panjang total: 2.710 mm, lebar meja: 530 mm, panjang meja: 900 mm, jenis arus masuk: tiga fasa, kecepatan rotasi (maks.): 4.000 rpm, kecepatan rotasi (min.): 40 rpm, beban meja: 800 kg, berat keseluruhan: 2.890 kg, tegangan masuk: 380 V, berat benda kerja (maks.): 800 kg, arus masuk: 44 A, frekuensi input: 50 Hz, jumlah spindel: 2, jumlah slot dalam magazin alat: 20, Perlengkapan: dokumentasi / manual, Tool holder: SK 40, Control: DECKEL DIALOG 11, with documentation. According to our research, the NPL01 board of the tool changer is defective. Therefore, the automatic tool changer does not function. Otherwise, the machine is fully operational. Iodpfswqdtpox Aa Nsht User manual (machine manual 1), control diagnostic manual "DIALOG 11", machine manual 2 (accessories), programming manuals 1-3, and electrical schematics are available. The machine can be inspected under power. The machine is sold as seen. No warranty.

Kondisi: baik (bekas), Tahun pembuatan: 1982, Fungsionalitas: berfungsi sepenuhnya, Universal tool milling machine with 3D control, manual handwheels and a universal table adjustable in three axes. Control System: Isdpswid Spefx Aa Nsht Deckel Dialog 4: - 3D path control, including drilling and milling cycles, - Monitor, electronic hand control panel - Terminal for program input and output Technical Specifications: Travel range X/Y/Z: 300 x 220 x 400 mm Spindle speed: 31.5 – 3,150 rpm with 21 gear steps Feed rate: 4–2,000 mm/min Rapid traverse: 4 m/min Drive power: 1.6–2.0 kW Tool holder: SK 40 Hydraulic tool clamping Universal milling table with digital display: - Clamping surface: 600 mm x 320 mm - Table load: 180 kg - Rotary range C-axis: 360° - Tilting range A-axis: 15°/45° - Swivel range B-axis: +/- 45° Vertical milling head: Quill stroke by hand – horizontal 65 mm, vertical 60 mm Additional equipment: - Manual machine handwheels with scale - Direct position measuring system for the NC axes - Coolant system Special accessories: - Tool holders approx. 33 pcs (without tools) – see photo - High-speed milling spindle Machine data: - Machine weight approx. 1,380 kg - Required space incl. auxiliary components: L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm - Power supply 380 V, 50 Hz, 12 kVA The machine is in good, fully operational condition. It can be inspected under power and in cutting operation by prior arrangement.

Kondisi: bekas, Tahun pembuatan: 1983, Technical details: x-travel: 560 mm y-travel: 500 mm Ihsdpfx Aaewgdz Ee Net z-travel: 450 mm

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1985, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 500 mm, panjang umpan sumbu Y: 400 mm, panjang umpan sumbu Z: 400 mm, kecepatan spindel (maks.): 2.500 rpm, kecepatan spindel (min.): 50 rpm, panjang total: 800 mm, lebar meja: 460 mm, panjang meja: 800 mm, jenis arus masuk: tiga fasa, kecepatan rotasi (maks.): 2.500 rpm, kecepatan rotasi (min.): 50 rpm, masa garansi: 3 bulan, Perlengkapan: dokumentasi / manual, Kami menawarkan mesin frais Deckel FP4 M yang telah direkondisi total, tahun pembuatan 1985. Produsen: Deckel Model: FP4 M Tahun pembuatan: 1985 Kondisi: direkondisi total Kontrol: TNC113 kontrol aktif Opsional: meja universal dengan permukaan penjepit 800mm x 370mm Iodjx Sllpopfx Aa Noht Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirim pesan kepada kami atau hubungi kami.

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Dear Sir or Madam, We hereby offer a DECKEL FP1 three-axis milling machine, upgraded with modern safety features. These later model machines are equipped, among other things, with central lubrication, an electric coolant pump, and a brake motor. The control cabinet can be quickly disconnected from the machine thanks to a Harting connector. Safety components are also connected to the control cabinet using this connector type, so that handling is in no way impaired. The retrofitted safety features—which we offer for every machine type—come with a 12-month warranty! *The electronic spindle guard can be adjusted in multiple axes and is designed to prevent access to the working spindle as well as to protect against flying chips, coolant, etc.* *The electronic spindle guard cap prevents access to the rotating spindle stub and tool clamping system.* Delivery time: on request Year of manufacture: 1989-1992 Machine no.: 2102-xxxx Table: fixed angle table Isdpfx Aasx Rvlqo Neht Travel paths: X 300 mm / Y 160 mm / Z 340 mm Quill stroke: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: stepless 5-500 mm/min Rapid feed: 1200 mm/min Equipment and accessories include, among others: 3-axis digital display with Heidenhain active control, coolant device, central lubrication, machine mounts, technical documentation, electronic spindle guard, electronic spindle guard cap Our service commitment to you: - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced beforehand - Upon request, we can completely or partially overhaul your selected machine - Upon request, you can order additional accessories such as tooling directly - Upon request, we can install extra accessories such as safety features, etc. - We are happy to take care of shipping and/or installation for you.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 300 mm, jarak lintasan sumbu Y: 160 mm, jarak gerak sumbu Z: 340 mm, kecepatan spindel (maks.): 2.000 rpm, kecepatan spindel (min.): 40 rpm, kecepatan rotasi (maks.): 2.000 rpm, kecepatan rotasi (min.): 40 rpm, 3-axis active digital readout (Heidenhain TNC113) Spindle taper: SK40 (S20x2) Travel paths: X 300 / Y 160 / Z 340mm Spindle speed: 40 - 2000 rpm (2 gearbox stages) Feed rate: steplessly adjustable The machine is in well-maintained condition and can be inspected under power at the site. Includes extensive accessories: - Machine vice - Operating manual / electrical schematic / spare parts list - Collet set (S20x2) incl. SK40 collet chuck Ihjdpfx Ajvnrz Roa Nst - Additional accessories available on request.

Kondisi: baik (bekas), Various Deckel FP3 milling machines are for sale, all of which are in good condition. A special feature of this machine is the mounted table, which can be swiveled, rotated, or shifted. Purchasing the machine with a "standard" milling table is also possible. The machine has been cleaned and inspected by us. On request, safety devices can be installed for an additional charge. Dimensions (L x W x H): approx. 2000 x 1600 x 1900 mm Weight: approx. 1,500 kg TECHNICAL DATA Digital readout: 3-axis digital display Travel distances: X-axis: approx. 500 mm Y-axis: approx. 300 mm Z-axis: approx. 380 mm Spindle: Speed range: approx. 40 - 2,000 rpm Tool holder: ISO 40 Drive power: approx. 3.8 kW Tool clamping: manual Ihodpfx Asiz T Exja Njt Feeds & rapid traverse: in all 3 axes Feed range: approx. 10 - 500 mm/min Rapid traverse: approx. 1.5 m/min Prices are plus VAT Viewing possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For more information or contact options, visit our website.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2803-3500, panjang pemakanan sumbu X: 400 mm, panjang umpan sumbu Y: 320 mm, panjang umpan sumbu Z: 400 mm, kecepatan spindel (maks.): 3.150 rpm, kecepatan spindel (min.): 32 rpm, Dijual FP3NC dengan kontrol Heidenhain MC 320. Mesin baru-baru ini telah dilengkapi dengan kontrol tersebut dan fungsinya telah diuji. Mesin ditawarkan tanpa alat/alat penjepit. Meja termasuk dalam paket pengiriman. Ihodpfx Aaot Dmx Ee Not Atas permintaan, pengiriman ke seluruh Jerman dapat dilakukan dengan menanggung biaya.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1982, Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP3 with 3-axis Heidenhain active digital readout and stepless feed – Excellent condition Technical data: >> Year of manufacture: 1982 Machine no.: 2201-5598 >> Rotary-swivel-tilting table (newly planed) >> Spindle speed: 25 - 2500 rpm >> Stepless feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 2.0/4.0 kW >> Spindle brake >> Travel X/Y/Z: 500/300/400 mm >> Vertical milling head can be moved 200 mm on the spindle carrier >> Extendable vertical quill and horizontal quill - SK40 taper >> Drawbar system M16 >> Weight approx. 1500 kg Accessories and equipment: >> 3-axis Heidenhain TNC113 active digital readout >> Coolant device >> Central lubrication About the machine: For sale is a Deckel FP3 universal milling machine in very good condition. The machine has minimal backlash and all spindles move smoothly. On this newer FP3 model, the feed on all three axes is steplessly adjustable; furthermore, each axis features rapid traverse. A major advantage is the active 3-axis digital readout. With this Heidenhain control, you can enter dimensions and the machine will automatically traverse to them. An oil change has been carried out. The machine has been mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power on-site. The machine is available immediately. Isdjx Ig Dxspfx Aa Neht

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1968, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 200 mm, jarak gerak sumbu Z: 400 mm, kecepatan spindel (maks.): 2.000 rpm, kecepatan spindel (min.): 40 rpm, jarak gerak quill: 80 mm, panjang total: 1.000 mm, lebar meja: 520 mm, panjang meja: 1.000 mm, beban meja: 2.000 kg, berat keseluruhan: 2.500 kg, tegangan masuk: 400 V, berat benda kerja (maks.): 2.000 kg, Kami menawarkan mesin frais DECKEL FP2LB yang telah direkondisi ini, tahun pembuatan 1968. Isdpox Sdxzsfx Aa Noht

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, de_DE Ihsdpfx Aorzu Stsa Njt

Kondisi: bekas, Mesin frais alat bekas untuk pengerjaan logam merek Deckel model FP3a. Mesin dalam kondisi bekas, namun masih berfungsi dan siap digunakan. Memiliki konstruksi kokoh dan berbagai fitur yang memungkinkan pemrosesan logam secara presisi. Harga netto ditambah 23% PPN Motor spindle: 2/4 kW Kecepatan spindle: 25-2500 rpm Spindle: SK 40 Jangkauan pinole: 100 mm Motor feeding: 1,5 kW Kecepatan feeding: 5-500 mm/menit Koreksi feeding: 0-120% Feeding cepat: 1500 mm/menit Isdoxluu Rspfx Aa Noht Pergerakan mekanik/manual: X 490/500 mm Y 290/300 mm Z 390/400 mm Kepala dapat digeser 200 mm Berat mesin: 1750 kg Berat maksimal benda kerja: 500 kg

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 300 mm, panjang umpan sumbu Y: 160 mm, panjang umpan sumbu Z: 340 mm, For sale: Conventional milling machine by Deckel, model FP1 Thanks to its compact size, this machine is ideal for quick tasks in confined spaces. The machine is fully functional. Technical specifications: - X-travel: 300 mm Iedeugv Hvopfx Aa Nsht - Y-travel: 160 mm - Z-travel: 340 mm - Tool holder: SK40 - Spindle speed: 40-2000 rpm - Control: Conventional - Table size: 600 x 210 mm - Total power requirement: 2 kW - Machine weight: approx. 0.73 t - Required space: approx. 1200 x 1100 x 1600 mm Loading and shipping can be organized Europe-wide upon request. All prices are subject to VAT. Viewing is possible by appointment. Please contact us—our team will be happy to assist you! Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality, yet affordable metalworking machine for your production? Or do you wish to sell yours? For further information or contact options, please visit our website.

Kondisi: bekas, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 500 mm, tinggi total: 3.200 mm, lebar total: 3.600 mm, panjang total: 4.900 mm, berat keseluruhan: 3.300 kg, Aksesori: penukar alat untuk perkakas sistem pendingin, tangki pendingin & oli Isdex Ni Hfspfx Aa Nsht penjepit alat hidrolik untuk pergantian alat yang cepat dan mudah – kepala geser horizontal/vertikal untuk mengganti alat aktif dalam program selama pemrosesan Spindle: 40 SK RPM: 18-6300 rpm Volt: 380 V Hertz: 50 Hz

Kondisi: baik (bekas), Tahun pembuatan: 1986, CNC universal milling machine Ihedpfx Aaodtdaho Nst Manufacturer: DECKEL Model: FP5NC Year: 1986 Control: DIALOG 4 Only spare parts available. Please inquire about the parts you need.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1972, Mesin frais alat Deckel FP1, meja sudut putar, dudukan spindle MK 4. Aksesori: penahan balik, berbagai jenis collet penjepit. Kondisi siap pakai. Dapat didemonstrasikan dalam keadaan menyala sesuai kesepakatan. Ijdpfx Aaex Nclno Neht

Kondisi: baik (bekas), Tahun pembuatan: 1964, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 200 mm, jarak gerak sumbu Z: 400 mm, kecepatan spindel (maks.): 200 rpm, kecepatan spindel (min.): 40 rpm, frekuensi input: 50 Hz, The machine is in good condition! Tool holder: SK 40 Travel X/Y/Z: 500 / 200 / 400 mm Speed range: (18 steps) 40 - 2000 rpm Vertical spindle stroke: 60 mm Horizontal spindle stroke: 100 mm Feeds: 8 - 400 mm/rev Table size: 700 x 300 mm Motor power: 2.2 kW Connection: 400 V / 16 A plug Weight: approx. 1300 kg Required space (LxWxH): approx. 1200 x 1250 x 1670 mm Swivelling head: 90° / 90° Equipment: - 3-axis digital readout - Coolant device Ihjdsilg H Ejpfx Aa Njt We are happy to demonstrate the machine under power at our premises. All details are without guarantee. Subject to prior sale. The item is sold with the exclusion of any warranty. The exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of obligations by the seller, nor for injury to life, body, or health.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 300 mm, jarak lintasan sumbu Y: 160 mm, jarak gerak sumbu Z: 360 mm, For sale is a Deckel FP1 milling machine featuring 3-axis active control. The machine is fully functional and undergoes inspection, cleaning, and storage at our goods-in area upon arrival. Technical Data: - Digital display - 3-axis active digital readout by HEIDENHAIN - Travel range X-axis: 300 mm - Travel range Y-axis: 160 mm - Travel range Z-axis: 340 mm - Tool holder: SK 40 - Milling head type: Vertical milling head - Spindle speed range: 40 - 2000 rpm - Number of speed steps: 16 - Table feed X-axis: 290 mm - Table feed Y-axis: 150 mm - Table feed Z-axis: 330 mm - Weight: 650 kg - Dimensions: 1200 x 1100 x 1800 mm Accessories: - Active feed on X, Y, and Z axes - Coolant system This offer is for the machine only, tools are not included but can be negotiated separately. Upon request and for an additional charge, loading and transport within Europe can be arranged. Prices are exclusive of VAT. Viewing is possible by appointment. Contact us—our team will be happy to assist you. Ijdpfx Aaer H E Uij Njht Trade-in or exchange accepted! Machinery purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or to get in touch, please visit our website.

Kondisi: Pembawa suku cadang rusak (bekas), Tahun pembuatan: 1990, Suku cadang untuk mesin frais CNC, pabrikan DECKEL FP5CC/T th. 1990. Suku cadang seperti: kontrol DIALOG 11, lemari listrik lengkap, spindle frais vertikal & horizontal ISO 40, meja universal miring-putar, majalah alat dengan penukar, konveyor serpihan, motor, dll. Silakan ajukan permintaan sesuai kebutuhan. Ihedpefgvu Uofx Aa Net

Tahun pembuatan: 1968, Kondisi: baik (bekas), For sale is a Deckel brand milling machine from 1968. The machine is in good to very good condition and fully functional. (No digital readout, but can be mounted additionally upon request.) Technical specifications: Tool holder: SK 40 Travels X/Y/Z: 400 / 200 / 400 mm Speed range: 40 - 2000 rpm Vertical spindle travel: 60 mm Horizontal spindle travel: 100 mm Feeds: 8 - 400 mm/rev Table size: 700 x 330 mm Motor power: 2.2 kW Connection: 400 V / 16 A plug Weight: approx. 1,300 kg All prices plus VAT. Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. You need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? Ijdpfx Aasihf Eto Neht For more information or contact options, please visit our website.

Tahun pembuatan: 1990, Kondisi: baik (bekas), Various collets and holders, approx. 300 pieces. Suitable for DECKEL milling machines Ihedpfx Aajhvz Iij Not FP1 – FP2 – FP3 – FP4 Individual sale upon request.

Kondisi: sangat baik (bekas), panjang pemakanan sumbu X: 400 mm, panjang umpan sumbu Y: 200 mm, panjang umpan sumbu Z: 400 mm, For sale is a conventional milling machine from Deckel, model FP2. The machine is in excellent condition, overhauled by Harich (exact date unknown), and is immediately ready for operation. Technical data: Tool holder: SK 40 Travel X/Y/Z: 400 / 200 / 400 mm Spindle speed range: 40 - 2,000 rpm Vertical spindle stroke: 60 mm Horizontal spindle stroke: 100 mm Feed rates: 8 - 400 mm/rev Table size: 700 x 330 mm Motor power: 2.2 kW Connection: 400 V / 16 A plug Weight: approx. 1,300 kg The vice and tools are NOT included in the offer but can be provided upon request. Transport and loading can be organized throughout Europe for an additional charge, if desired. All prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team is happy to assist you. Isdpou Ti Akofx Aa Njht Trade-in or exchange possible! Machinery trading PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or are you looking to sell your equipment? For further information or contact options, please visit our website.

Kondisi: baik (bekas), For sale: Deckel FP2 with high-speed milling head (V-belt drive with transmission) The machine has only been used for copper & graphite machining and has therefore not been heavily used. The machine is ready for immediate use and is fully functional. Retrofitting a digital readout is possible at additional cost. The machine can also be sold without the milling head. Dividing head NOT included. Accessories available at extra cost. Ihsdpjlz R Iwjfx Aa Njt Tool holder: SK 40 Travel X/Y/Z: 400 / 200 / 400 mm Speed range: 40 - 2000 rpm Vertical quill travel: 60 mm Horizontal quill travel: 100 mm Feeds: 8 - 400 mm/rev Table size: 700 x 330 mm Motor power: 2.2 kW Connection: 400 V / 16 A plug Weight: approx. 1300 kg All prices plus VAT. Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Kondisi: bekas, Tahun pembuatan: 1985, Fungsionalitas: berfungsi sepenuhnya, panjang meja: 680 mm, lebar meja: 380 mm, tinggi meja: 345 mm,