Beli Deckel Fp 1 bekas (693)

Kondisi: bekas, Support bearing Manufacturer: Deckel Rail width (inner): 92 mm Rail width (outer): 130 mm Isdpfxsctd Rho Aa Njtb

Kondisi: sangat baik (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP4M with 3-axis Heidenhain digital readout in special light grey paint finish!!! Technical Specifications: >> Year of manufacture: 1987 Machine No.: 2203-2772 >> Fixed angle table >> Spindle speed: 50 – 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head on spindle carrier adjustable by 150 mm >> Vertical quill and horizontal quill – SK40 >> Vertical quill extendable by 90 mm >> Drawbar system M16 >> Weight approx. 1500 kg Accessories and Features: >> 3-axis Heidenhain digital readout >> Coolant system >> Chip tray Itodevg Ewcopfx Aa Neb >> Central lubrication About the Machine: Offered here is a Deckel FP4M universal milling machine in very good condition. The machine has minimal backlash, and all spindles move smoothly and evenly. Even at maximum spindle speeds, the milling machine runs quietly. Rapid traverse is available in all axes. A reliable and user-friendly machine. Oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take advantage of the opportunity to inspect and test the machine under power on site.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP3 with new 3-axis FPS Aktiv Digital Readout Heidenhain Completely overhauled by FPS in 2015 As-new condition Itsdpfxju Dm E He Aa Nsb Technical data: - Year of manufacture: 1980 Machine No. 2201-5045 - Fixed angle table - Spindle speed: 25 – 2,500 rpm - Infinitely variable feed rate on 3 axes - Rapid traverse on 3 axes - Drive power: 2.0 / 4.0 kW - Spindle brake - Travel (X/Y/Z): 500/300/400 mm - Vertical milling head adjustable on the spindle carrier by 200 mm - Vertical and horizontal quill – SK40 extendable - Drawbar M16 - Weight approx. 1,500 kg Accessories and features: - 3-axis Aktiv digital readout Heidenhain (latest version) - Coolant system - Central lubrication system About the machine: Offered is a universal milling machine Deckel FP3 in as-new condition. The FP3 was completely overhauled by FPS in 2015 and has since seen very little use. The machine has minimal backlash and all spindles move smoothly. On this newer FP3 model, the feed is steplessly adjustable in all three axes. Additionally, the machine features rapid traverse in each axis. A major advantage is the Aktiv 3-axis digital readout. With this Heidenhain path control system, you can enter dimensions that the machine automatically moves to. An oil change has been performed. The machine has been mechanically and electrically tested. The Heidenhain digital display makes working easier and even more precise. Take the opportunity to view and test the machine under power on site. The machine is available immediately.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1986, Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP4M with 3-axis Heidenhain digital readout in special light gray paintwork!!! Technical data: >> Year of manufacture: 1986 Machine No.: 2203-2486 >> Fixed angle table >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travels X/Y/Z: 500/400/400 mm >> Vertical milling head can be offset 150 mm on spindle carrier >> Vertical and horizontal quill - SK40 >> Vertical quill extendable by 90 mm >> Drawbar system M16 Iodpfx Aaevb T Ufo Netb >> Weight: approx. 1,500 kg Equipment and accessories: >> 3-axis Heidenhain digital readout >> Coolant system >> Chip tray >> Central lubrication About the machine: Offered is a Deckel FP4M universal milling machine in very good condition. The machine has minimal backlash and all spindles move smoothly and evenly. The milling machine runs quietly even at maximum speed. Rapid traverse on all axes. A reliable and user-friendly machine. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. You are welcome to view and test the machine under power on site.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, en-GB: Universal Milling Machine Deckel FP2, repowered by FPS, year of manufacture 2013, with 3-axis digital readout Heidenhain ND 780 - As New Condition!! Technical Specifications: - Machine No.: 2202-7020, FPS No.: 3364, Year: 2013 - Fixed angle table - Spindle speed: 40 - 2,000 rpm - Feed and rapid traverse on 3 axes - Drive power: 2.2 kW - Travel X/Y/Z: 400 / 200 / 400 mm - Features: Vertical and horizontal spindle - Extendable vertical and horizontal quill - SK 40 - Drawbar system S20x2 - Weight approx. 1,100 kg Accessories and Equipment: - 3-axis digital readout Heidenhain ND 780 - Brake motor for immediate spindle stop Itsdpfsvbifgsx Aa Nob - Centralised lubrication - 2 x emergency stop buttons - Operating manual - Coolant system About the machine: Offered here is a Universal Milling Machine Deckel FP2 repowered by FPS, in almost new condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine has automatic centralised lubrication, and for safety is fitted with two emergency stop switches. Status as of 2013. Mechanically and electrically tested. The Heidenhain digital readout makes machining easier and even more precise. Take the opportunity to inspect and test the Deckel under power on site. The machine is immediately available.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP3L with 3-axis digital readout K&C NEW, in very good condition Technical Data: >> Year of manufacture: approx. 1975, Machine No. 0924 >> Fixed angle table (clamping surface 1000 mm x 440 mm) >> Spindle speed: 40 - 2000 rpm >> Feed and rapid traverse on 3 axes >> Feed rate from 10 to 500 mm/min >> Rapid traverse 1500 mm/min in all feed directions >> Drive power: 2.2 kW >> Travel X/Y/Z: 800/300/400 mm (Y travel can be shifted by an additional 200 mm) Isdpfx Aaovn N Hdo Nstb >> Equipment: vertical and horizontal spindle >> Extendable vertical and horizontal quill SK40 >> Drawbar system S20x2 >> Weight approx. 1900 kg Accessories and features: >> 3-axis digital readout K&C, newly installed with manufacturer warranty and operating manual. Display unit: Setting reference points, zero points, input of coordinates, mm/inch switching, absolute or incremental coordinates, circle functions, hole pattern, radius milling functions, etc. >> Mechanical centralized lubrication >> Operating manual >> Hydraulic vice 160mm >> Walter rotary table 500mm About the machine: Offered here is a Deckel FP3L universal milling machine in very good condition. The vertical head can be shifted by 200 mm to allow an even larger working area. A central pump ensures lubrication of the various axes. A particular feature of this machine type is its basic design, as it is equipped with an inclined table bed. The movements are assigned to the work spindle and thus to the tool. This guarantees very high accuracy, as different workpiece weights do not affect axis movements. Mechanically and electrically tested. Take advantage of the opportunity to inspect and test the machine on site under power.

Kondisi: bekas, tinggi total: 16.000 mm, lebar total: 1.100 mm, panjang total: 1.500 mm, Empty weight: 1,000 kg Milling Machine, Universal Milling Machine, Milling Bench Model: Conventional Manufacturer: Deckel Type: FP2 Travel: 400x270x400 mm Itjdex S Eayepfx Aa Njb Speed: 40–2,000 rpm Table: 700x330 mm Spindle taper: ISO 40 Spindle motor power: 2.2 kW Overall dimensions: 1,500 x 1,100 x 1,600 mm Machine weight: 1,000 kg - Documentation available: No - CE certificate available: No - Control: Manual/conventional - Power [kW]: 2.2 - X-axis travel [mm]: 400 - Y-axis travel [mm]: 270 - Z-axis travel [mm]: 400 - Table length [mm]: 700 - Table width [mm]: 330 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 2,000 - Transport dimensions: 1,500 mm x 1,100 mm x 1,600 mm (L x W x H) - Transport weight [kg]: 1,000 kg - Number of transport packages: 1 Financial Information VAT: The indicated price is net, plus VAT VAT/differential taxation: VAT recoverable for businesses Delivery and trade-in possible at any time for all items in the industrial sector Lukas van Rossum

Kondisi: baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, Technical Details X-travel: 1040 mm Y-travel: 600 mm Z-travel: 500 mm Control system: Heidenhain iTNC 530 Table size: 1250 x 600 mm Table load capacity: 600 kg Tool holder: SK 40 Spindle speeds: 1 – 8,000 rpm Spindle torque (S1/S6): 140/200 Nm Feed range: 40,000 mm/min Rapid traverse (X and Z): 70 m/min Rapid traverse (Y): 40 m/min Spindle motor (100/40% duty cycle): 13/19 kW Total connected load: 39 kVA Machine weight approx.: 8.9 t Space requirements approx.: — m Additional Information Power-on hours: 70,278 Spindle hours: 23,335 Please note the attached geometry measurement protocol and the tool clamping force measurement. Equipment: - CNC path control Heidenhain iTNC 530 - Electronic handwheel Heidenhain HR 410 - Motor spindle with increased torque - Direct measuring systems in Y and Z axes - Preparation for probe system - Tool changer, 30 positions; tool diameter 100/140 mm, length 300 mm, weight 7 kg Iodpfx Aajx Sv I Us Netb - ROTOclear - Production package 2 - Internal coolant supply through the spindle, 20 bar - Coolant system with paper band filter - Cooling device, air blast through spindle center, selectable via M function - Chip conveyor - Bed flushing - Linear drive in X axis - Operating mode 4: Program check with extended manual intervention - Machine documentation Transport dimensions: 4,100 x 2,500 x 3,000 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 1986, Dear Sir or Madam, We are pleased to offer you very well-maintained milling machines of the type Deckel FP4M. Each machine is at least technically inspected in our workshop and is therefore fully operational. We look forward to receiving your enquiry! Delivery time: on request Machine Number: xxxx-xxxx Year of Manufacture: xxxx Table version: fixed Spindle speed: 50 - 2500 rpm Feed rate: 8 - 630 mm/min Rapid traverse: 1300 mm/min Drive power: 3.7kW / 4.4kW Rapid traverse: 1300 mm/min Travel X/Y/Z: 500/400/400mm Tool holder: SK40 Pull stud system: M16 Vertical quill stroke: 90mm Weight: approx. 1.6t Additional equipment and accessories: on request Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - Upon request, we will completely or partially overhaul the machine you select Itjdpfx Aelrw Tioa Nob - You are free to choose the paint color of your selected machine - On request, you can order additional accessories such as tools directly - On request, we can install additional accessories such as safety devices - We are happy to arrange shipping and/or installation for you

Kondisi: bekas, Tahun pembuatan: 2002, Merek: DECKEL-MAHO, Tipe: DMU100T, Tahun pembuatan: 2002, Sistem kontrol, Merek Heidenhain, Tipe iTNC 530, 5 sumbu (head swivel, meja putar NC), penukar alat 32 posisi, dudukan alat SK40, kecepatan spindle 10.000 rpm, konveyor serpihan, unit pendingin merek Schimpke, filter sabuk merek Interlith, tipe STB3/600HD, jam kerja tercatat 72.535; 28.209, pemantauan alat merek Brankamp, 4 lemari laci/kontainer, 1 lemari roll up WTS, isi: sekitar 150 dudukan alat SK 40, perlengkapan penjepit, alat ukur, tap ulir, bor center, 1 ragum HD merek Allmatic LC 160-200, probe pengukur inframerah (di penukar alat) Itsdex R Edvjpfx Aa Nob +++ Perhatian: Mesin adalah bagian dari lelang online! +++

Kondisi: bekas, Tahun pembuatan: 2007, Merek: DECKEL-MAHO, Tipe: DMU100P DuoBLOCK, Tahun Pembuatan: 2007, No. Seri: 11450001263, Kontrol, Prod. Heidenhain, Tipe iTNC530, 5 sumbu, Meja putar CNC, Perjalanan sumbu X/Y/Z 1.000 x 1.000 x 1.000 mm, dudukan alat SK 50, kecepatan spindle 12.000 rpm, pemantauan alat, Prod. Brankamp, penukar alat otomatis 60 posisi, konveyor serbuk, sistem filter sabuk, Prod. BMF, Tipe KA600, th. 2007, aksesori, jam operasional tercatat: 67.254; 24.704, 2 lemari rol WTS buatan Lista, 3 lemari laci lebar 1.000 mm, 6/8/9 laci tarik, isi: 100 dudukan alat SK 50 (alat lengkap), milling insert, bor, insert potong, perlengkapan penjepit, alat pengaturan, probe pengukur inframerah, alat bantu pemasangan alat. +++ Perhatian: Mesin ini merupakan bagian dari lelang online! +++ Itodpfx Aasx R Dwze Nsb

Kondisi: bekas, Tahun pembuatan: 2013, mazagineg43 Itsdpfx Ajx R Enuoa Neb

Kondisi: bekas, Tahun pembuatan: 2013, translation_001 Iodpfx Aasx R Enno Nstb

Kondisi: bekas, Tahun pembuatan: 2007, dmc1035specs Ijdpfxex R Em Ro Aa Nstb

Kondisi: bekas, Flat belt pulley, toothed pulley, multi-belt pulley -Spare part from a Deckel machining center, type FP3A -Diameter: 80 mm Itsdpsffh Nzofx Aa Nsb -Bore: 28 mm -Dimensions: 80/80/H61 mm -Weight: 1.2 kg

Kondisi: bekas, Control panel, operating unit, control board, operator panel, control unit, keyboard, CNC control Itsdoul H Ezjpfx Aa Nsb -Manufacturer: Deckel, operating unit from Deckel FP4L milling machine -Transport dimensions: 1200/800/H220 mm -Weight: 33 kg

Kondisi: bekas, Glass scale, glass measuring scale, scale, digital display, measuring scale, linear measuring system, length measuring device, linear scale, position indicator, digital scales, digital scale for digital display Itjdpfx Aouuu H Eoa Nob -Manufacturer: Heidenhain, glass scale removed from Deckel FP4L milling machine -Type: LS 803 ML 1240 mm -Quantity: 1x glass scale available -Dimensions: 1345/200/H50 mm -Weight: 1.2 kg

Kondisi: baik (bekas), Universal milling head, milling holder, milling extension, angle milling head Isdpfxsulp Ais Aa Netb - Manufacturer: Deckel, milling head from milling machine FP4L - Spindle taper: SK40 - Milling head: swiveling - Tool clamping: electromechanical - Individual components: see photos - Transport dimensions: 1690/360/H745 mm - Weight: 548 kg

Kondisi: sangat baik (bekas), Spiral milling device, dividing head, indexing head, rotary table, turntable dividing head, spiral milling device complete with all accessories Itodpfx Aed E Hlbsa Nsb - Origin: from a Deckel FP2 - Dividing head: spiral milling device complete with all accessories, change gears, indexing plates - Center distance: 415 mm - Spindle taper: SK40 - Suitable for: cutter grinding - Ratio: 1:40 - Dividing head: swiveling - Dimensions: 820/390/H440 mm - Weight: 80 kg

Kondisi: bekas, Rotary Encoder, Tachometer, Encoder -Spare part from a Deckel FP3A machining center Itjdpfx Aoffh N Asa Neb -Quantity: 1 tachometer available -Price: per piece -Dimensions: 83/122/H95 mm -Weight: 1.1 kg

Kondisi: bekas, Technical details: X-travel: 600 mm Y-travel: 300 mm Z-travel: 360 mm Speed range: max. horizontal: 40–2000 rpm Spindle taper: vertical / horizontal: SK 40 / SK 40 Speed range: max. permissible: 40–2000 rpm Feed rate: 2–3600 mm/min Quill stroke: 80 mm Table size: 810 x 420 mm Total power requirement: 3 kVA Machine weight approx.: 1300 kg Dimensions (LxWxH): approx. 1.8 x 1.35 x 1.95 m Milling machine with slotting head Slotting stroke: 32–80 mm with 10 x double strokes, 24–285 strokes/min Iedpfx Asu U E T Isa Njtb Heidenhain 3-axis digital readout *

Kondisi: baik (bekas), Tahun pembuatan: 1986, jarak pergerakan sumbu X: 710 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 455 mm, Perjalanan sumbu x: 710 mm Perjalanan sumbu y: 600 mm Perjalanan sumbu z: 455 mm Kontrol: Dialog 4 Kecepatan putar: 6300 rpm Tipe dudukan alat: SK40 Stroke pinole: 80 mm Ukuran meja: 550 x 1000 mm Isdpfxsx T Awxs Aa Notb Kapasitas beban meja: 0,6 t Kebutuhan daya total: kW Berat mesin kira-kira: 4 t

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, en_DECKEL MAHO DMC 104 V SIEMENS 810 D Itodpfxswm Aq Eo Aa Nsb Technical Specifications: X-axis travel: 1040 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Spindle speed: 12,000 rpm Spindle taper: SK 40 Tool magazine: 30 positions Clamping surface: 1250 x 600 mm Max. table load: 800 kg Internal coolant supply: 40 bar Accessories: Chip conveyor, spindle chiller, ICS (internal coolant supply), tool measurement, documentation.

Kondisi: baik (bekas), Tahun pembuatan: 1982, Fungsionalitas: berfungsi sepenuhnya, Universal tool milling machine with 3D control, manual handwheels and a universal table adjustable in three axes. Control System: Deckel Dialog 4: - 3D path control, including drilling and milling cycles, - Monitor, electronic hand control panel - Terminal for program input and output Technical Specifications: Travel range X/Y/Z: 300 x 220 x 400 mm Iedpewid Spofx Aa Netb Spindle speed: 31.5 – 3,150 rpm with 21 gear steps Feed rate: 4–2,000 mm/min Rapid traverse: 4 m/min Drive power: 1.6–2.0 kW Tool holder: SK 40 Hydraulic tool clamping Universal milling table with digital display: - Clamping surface: 600 mm x 320 mm - Table load: 180 kg - Rotary range C-axis: 360° - Tilting range A-axis: 15°/45° - Swivel range B-axis: +/- 45° Vertical milling head: Quill stroke by hand – horizontal 65 mm, vertical 60 mm Additional equipment: - Manual machine handwheels with scale - Direct position measuring system for the NC axes - Coolant system Special accessories: - Tool holders approx. 33 pcs (without tools) – see photo - High-speed milling spindle Machine data: - Machine weight approx. 1,380 kg - Required space incl. auxiliary components: L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm - Power supply 380 V, 50 Hz, 12 kVA The machine is in good, fully operational condition. It can be inspected under power and in cutting operation by prior arrangement.

Tahun pembuatan: 1975, Kondisi: baik (bekas), Deckel FP3L with adjustable angle table, vertical milling head, SK 40 spindle taper, S20x2 spindle mount. Good, operational condition. Can be demonstrated under power by appointment. Isdpfx Aoildwxja Notb