Beli Deckel Fp 2 bekas (666)

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP2 in special light gray paint finish with new 3-axis K+C digital readout Technical Data: >> Machine No. 5983, Year of Manufacture: approx. 1975 >> Fixed angle table (newly overhauled) >> Spindle speed: 40 - 2000 rpm >> Feed and rapid traverse on 3 axes >> Drive power: 2.2 kW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Extendable vertical and horizontal quills – SK-40 taper >> Drawbar system S20x2 >> Weight approx. 1100 kg Accessories and Equipment: >> 3-axis digital readout by K+C, newly installed with manufacturer's warranty. Display unit: Set reference and zero points, input coordinates, switch mm/inch, absolute or incremental coordinates, circle functions, bolt hole patterns, radius milling functions, etc. >> Operating manual for digital readout >> Coolant system About the Machine: Bljdsu I Rm Nspfx Aarjr Offered is a Deckel FP2 universal milling machine in good condition. The Deckel shows minimal backlash on the handwheels, and all spindles move smoothly. The machine has been completely disassembled and newly painted. An oil change has been performed. Mechanically and electrically tested. The K+C digital readout makes operation easier and even more precise. Additionally, you receive a 1-year warranty on the new digital readout. Take the opportunity to inspect and test the Deckel under power on site. The machine is immediately available.

Kondisi: bekas, Universal-Marógép-DECKEL-FP1-2024-06 Bedpfsxxpp Nsx Aarelr

Kondisi: baik (bekas), Tahun pembuatan: 1976, Mesin frais Deckel FP1, meja sudut tetap, dudukan spindle SK 40. Rem spindle. Aksesori: penahan lawan, berbagai collet penjepit. Dalam kondisi baik dan siap pakai. Dapat didemonstrasikan dengan listrik sesuai kesepakatan. Bsdjxw T Efjpfx Aarelr

Kondisi: baik (bekas), Tahun pembuatan: 1998, The machine is dirty. Technical condition: good. Rotary and swivel table is installed. Bjdpfx Aasvptmkjrjlr

Kondisi: baik (bekas), Tahun pembuatan: 1986, CNC universal milling machine Make: DECKEL Type: FP5NC Year: 1986 Control: DIALOG 4 Bodpfxoxr A A Ao Aarjlr Travel paths: X710mm Y600mm Z500mm Clamping table: 1000mm x 550mm Tool holder: SK40 Feed rate programmable: 2 ... 3600 mm/min Spindle speed: 18 ... 6300 rpm Spindle power: 7.5 kW Machine in stock.

Kondisi: bekas, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 2820-0520, jarak pergerakan sumbu X: 400 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 400 mm, gores kuas bulu: 80 mm, panjang meja: 700 mm, lebar meja: 460 mm, kecepatan rotasi (maks.): 4.000 rpm, ★★★ CNC Tool Milling Machine Deckel FP3A ★★★ ● Machine Number: 2820-0520 ● Condition: Not tested ● Delivery Terms: Free loaded on truck – unpacked ● Location: Sprockhövel ● Availability: Immediately ● Payment Terms: Advance payment – by bank transfer ● Internal No.: DÖRK2 ⚙️Technical Specifications ☑️Control: Grundig Contour 3 ☑️Tool Holder: SK 40 ☑️Travels: X 400 mm, Y 400 mm, Z 400 mm ☑️Quill stroke vertical: 80 mm ☑️Table dimensions: 700 x 460 mm ☑️Vertical and horizontal milling ☑️Speed: up to 4,000 rpm ☑️Vertical milling head adjustable on spindle bracket: 50 mm ☑️Voltage: 380 V / 50 Hz ☑️Power consumption: 14.5 kVA ☑️Coolant system ☑️Handwheel ☑️Machine vice ALLMATIC HD 160 Scope of Delivery Bedsw Aicyepfx Aarslr ✔ Machine vice ALLMATIC HD 160 ✔ Available manuals (as per pictures) Dimensions & Weights ● Footprint L x W x H approx.: 3000 x 3000 x 2200 mm ● Weight approx.: 2000 kg If you have any questions or would like to arrange a viewing, please feel free to contact us. ⚠️Please also see our other listings⚠️ Additional notes: ►We expressly recommend collection via direct transport (by forwarding agent) ►The goods are sold under exclusion of any warranty ►Technical data without guarantee ►Subject to prior sale ❗The sale of the goods is exclusively to business customers❗

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP1 with 3-axis Heidenhain digital readout Original condition!!! Technical data: Bjdpfx Aaju Nvxmerjlr >> Machine No. 56560/08 Year of manufacture: approx. 1975 >> Fixed angular table >> Spindle speeds: 40 - 2000 rpm >> Feed on 2 axes >> Motor power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill SK40 >> Drawbar system S20x2 >> Weight approx. 700 kg Accessories & equipment: >> 3-axis Heidenhain digital readout >> Coolant system About the machine: For sale is a Deckel FP1 universal milling machine in very good original condition. The Deckel has minimal backlash on the handwheels and all spindles move smoothly. An oil change has been carried out. Mechanically and electrically inspected. The Heidenhain digital readout makes work easier and more precise. You are welcome to view and test the Deckel under power on site.

Kondisi: bekas, Technical details: X-travel: 600 mm Y-travel: 300 mm Z-travel: 360 mm Bjdpou U E T Iefx Aarslr Speed range: max. horizontal: 40–2000 rpm Spindle taper: vertical / horizontal: SK 40 / SK 40 Speed range: max. permissible: 40–2000 rpm Feed rate: 2–3600 mm/min Quill stroke: 80 mm Table size: 810 x 420 mm Total power requirement: 3 kVA Machine weight approx.: 1300 kg Dimensions (LxWxH): approx. 1.8 x 1.35 x 1.95 m Milling machine with slotting head Slotting stroke: 32–80 mm with 10 x double strokes, 24–285 strokes/min Heidenhain 3-axis digital readout *

Kondisi: baik (bekas), Tahun pembuatan: 1985, Deckel FP1 Aktiv dengan tampilan digital Heidenhain 3 sumbu, 3 sumbu aktif, meja tetap, dudukan spindle SK 40 M16. Pelumasan sentral, buku petunjuk penggunaan. Kondisi sangat baik, siap pakai, berasal dari pusat pelatihan kejuruan. Dapat didemonstrasikan dalam keadaan terhubung listrik sesuai kesepakatan. Bljdpfx Aexwunzearor

Kondisi: bekas, Tahun pembuatan: 1983, Technical details: Bsdpfxewgdz Es Aarelr x-travel: 560 mm y-travel: 500 mm z-travel: 450 mm

Tahun pembuatan: 1987, Kondisi: siap digunakan (bekas), Verfahrweg X/Y/Z: 560mm/500mm/450mm, Werkzeugaufnahme: SK40, Drehzahl: 4000U/min, Vorschub: 3,6m/min, Eilgang: 4m/min, Tischdimensionen X/Y: 530mm/900mm, max. Tischbelastung: 450kg. Maschinendimensionen X/Y/Z: 2350mm/2200mm/2000mm, Gewicht: ca. 2200kg, Steuerung: Deckel Contour 2. Eine Besichtigung vor Ort ist möglich. Blsdpfxjxvddvo Aaror

Kondisi: sangat baik (bekas), Tahun pembuatan: 1978, Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP1 with 3-axis K&C digital readout, stepless feed, in light grey, excellent condition Technical Data: >> Year of manufacture: 1978 Machine No. 2101-0465 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Stepless feed on 2 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake Bsdpfx Aajt Aav Iorelr >> Rapid traverse >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical quill and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 700 kg Accessories and Features: >> 3-axis K&C digital display newly installed, with manufacturer's warranty and operating manual. Display unit: setting of reference points and zero points, coordinate input, mm/inch selection, absolute or incremental coordinates, circle functions, hole patterns, radius milling functions, etc. >> Coolant system About the Machine: Offered here is a Universal Milling Machine Deckel FP1 in excellent condition. The machine has minimal play in the cranks and all spindles move smoothly. All bellows are new. This later FP1 model features stepless feed on two axes, and also has rapid traverse. An oil change has been carried out. The machine has been mechanically and electrically tested. The new digital display from K&C makes work easier and even more precise. You are welcome to view and test the machine under power at our premises.

Kondisi: baik (bekas), Tahun pembuatan: 1980, Deckel FP1 Aktiv with 3-axis Heidenhain digital readout, 2 active axes, fixed table, SK 40 S20x2 spindle taper. Good, operational condition; can be demonstrated under power by prior arrangement. Blsdpfx Aaoumcmqoror

Kondisi: sangat baik (bekas), Tahun pembuatan: 1985, Fungsionalitas: berfungsi sepenuhnya, Universal Milling Machine Deckel FP1 with New 3-Axis K&C Digital Readout and Stepless Feed on All Axes – Excellent Condition Technical Data: >> Year of manufacture: 1985 Machine no.: 2102-2867 >> Swivel-tilt rotary table (recently planed) >> Spindle speed range: 40 – 2000 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse on all 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travels (X/Y/Z): 300/160/340 mm >> Vertical milling head can be shifted 100 mm on the column >> Vertical and horizontal quill – SK40 taper >> Drawbar system: M16 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout K+C – newly installed, with manufacturer warranty and user manual. Display unit: reference points, set zero points, input of coordinates, mm/inch switching, absolute/incremental coordinates, circle functions, hole patterns, radius milling functions, and more. >> Coolant system >> Operating manual, spare parts diagram About the machine: Bledpfxst Aarpo Aarer Offered is a universal milling machine Deckel FP1 from 1985 in excellent condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum spindle speed, the milling machine runs very quietly. This newer FP1 model features stepless feed regulation on all three axes, as well as rapid traverse on these axes. An oil change has been carried out. Mechanically and electrically tested. The new digital readout from K&C makes operation easier and even more precise. Arrange a viewing and live test operation on site under power.

Kondisi: baik (bekas), Tahun pembuatan: 1973, Deckel FP2 universal milling machine with 2-axis Heidenhain digital readout, fixed table, SK 40 spindle taper. Extended ram-type milling head. Accessories include various collets and cutter arbors, tailstock. Good operational condition. Can be demonstrated under power by appointment. Blodpfxjumclas Aaror

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal Milling Machine Deckel FP1 with 3-Axis Digital Readout RSF, Overhauled in 2006, TOP Condition Technical Data: >> Machine No. 53819/08 >> Fixed angle table >> Spindle speed: 40 – 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travels X/Y/Z: 300/150/340 mm >> Vertical quill and horizontal quill – SK40 taper >> Spindle brake >> Drawbar system S20x2 >> Weight approx. 700 kg Bljdpfx Aajvb Ud Ueror Accessories and Equipment: >> 3-axis digital readout by RSF Elektronik >> Coolant system >> Machine leveling feet About the Machine: Offered here is a Deckel FP1 universal milling machine in very good condition. The Deckel features minimal backlash and all spindles move easily. An oil change has been carried out. The FP1 was completely overhauled by Huttelmaier in 2006 and has seen little use since. The RSF digital readout makes operation easier and more precise. Take advantage of the opportunity to view and test this machine under power on site.

Tahun pembuatan: 1976, Kondisi: baik (bekas), Deckel FP1 tool milling machine with 3-axis Heidenhain digital readout. The machine was overhauled by FPS several years ago. Features a fixed table, SK 40 spindle taper vertical, and SK 40 horizontal. Accessories include various collets and arbors, tailstock support. The machine is in good, operational condition, though the paintwork is no longer in perfect shape. Can be demonstrated under power by arrangement. Blodperhzcusfx Aarsr

Kondisi: sangat baik (bekas), Tahun pembuatan: 1984, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and stepless feed – Excellent CONDITION Technical data: >> Year of manufacture: 1984 Machine No. 2102-2601 >> Swivel-tilting rotary table >> Spindle speed: 40 - 2000 rpm >> Stepless feed on 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be displaced on spindle carrier by 100 mm >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Blodpfxou Racrj Aarjr Accessories and equipment: Dpbyzb >> 3-axis digital readout Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts list About the machine: Offered here is a Universal Milling Machine Deckel FP1, year 1984, in excellent condition. The machine has very little backlash and all spindles move smoothly. Even at maximum speeds, the milling machine runs very quietly. On this newer FP1 model, the feed in all three axes is steplessly adjustable, and the machine also features rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain position control, you can input measurements, and the machine will automatically move to the set positions. The FP1 was located in a training workshop, where it was only occasionally used. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes working easier and even more precise. Take advantage of the opportunity to inspect and test this machine under power on site.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Digital Readout and Infinitely Variable Feed Excellent Condition Technical Data: >> Year of Manufacture: 1992 Machine No.: 2102-6289 Bedpeu T D Nrefx Aarslr >> Fixed angle table (freshly planed) >> Speed range: 40 - 2000 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse on all 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel distances X/Y/Z: 300 / 160 / 340 mm >> Vertical milling head on spindle carrier adjustable by 100mm >> Vertical and horizontal quill - ISO 40 taper (SK40) >> Drawbar system: S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis Heidenhain TNC 113 digital readout >> Coolant device >> Operating manual, spare parts list About the machine: For sale is a universal milling machine Deckel FP1, year 1992, in excellent condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, feed can be infinitely adjusted on all three axes; rapid traverse is also available on these axes. A major advantage is the active 3-axis digital display. With this Heidenhain path control, you can enter dimensions that the machine will automatically approach. The FP1 was previously in a training workshop, where it was only used occasionally. Oil change has been performed. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes work easier and even more precise. Take the opportunity to view and test the machine under power on site.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, F736 Universal Milling Machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 retrofit at FA Huttelmaier Bledpfou Nvwvex Aarer Very good CONDITION Technical Data: >> Year of manufacture: 1985, Machine No. 2102-2891 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travels X/Y/Z: 300/160/340 mm >> Vertical milling head can be shifted 100 mm on spindle arm >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Features: >> 3-axis digital readout Heidenhain TNC 111 >> Coolant system >> Operating manual, spare parts list About the Machine: Offered is a Deckel FP1 universal milling machine, year 1985, in very good condition. The FP1 was completely overhauled in 2008 by the company Huttelmaier. The machine shows minimal play in the handwheels, and all spindles move smoothly. Even at maximum rotation speed, the milling machine runs very smoothly. This newer FP1 model features infinitely variable feed on all three axes, and also includes rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain position controller, you can enter desired dimensions, and the machine will automatically position to them. The FP1 was located in a training facility, where it was only used occasionally. An oil change has been carried out. Mechanically and electrically inspected. The Heidenhain digital display makes operation easier and more precise. Take this opportunity to inspect and test this gem on site under power.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP1, repowered by FPS, year of manufacture 2010, with 3-axis digital display Heidenhain ND 780. As new condition! Technical details: >> Machine No. 55249/08, year 2010 >> Fixed-angle table >> Spindle speed: 40 - 2000 rpm >> Feed: 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill SK40 >> Drawbar: S20x2 >> Weight approx. 700 kg Equipment and accessories: >> 3-axis digital display Heidenhain ND 780 >> Hydraulic machine vise >> Collets Bjdpfxjxu Hbho Aarjlr >> Tool holders >> Cutters >> Operating manual >> Coolant system About the machine: For sale is a universal milling machine Deckel FP1 repowered by FPS, in like-new condition. The package includes a hydraulic vise with swivel base, collets, tool holders, and cutters. Mechanically and electrically inspected. The Heidenhain digital readout simplifies and improves accuracy of operation. You are welcome to inspect and test the Deckel under power at our location. The machine is immediately available.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1979, Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP2 with 3-axis Aktiv TNC 113 Heidenhain digital readout and infinitely variable feed in TOP condition Technical Data: >> Year of manufacture: 1979 Machine no.: 2202-10777 >> Rigid angle table (freshly planed) >> Spindle speed: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse on 3 axes >> Motor power: 2.2 kW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head adjustable 150 mm on spindle carrier >> Vertically extendable quill and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 1400 kg Accessories and features: >> 3-axis TNC 113 Aktiv digital readout Heidenhain Blsdpfx Aaouc Ubwsrer >> Coolant system >> Central lubrication About the machine: For sale is a universal milling machine Deckel FP2 in very good condition. The FP2 comes from a laboratory of a state-owned facility, where it saw only limited use. The machine has minimal backlash and all spindles move smoothly. Even at maximum spindle speeds, the milling machine runs quietly. On this later FP2 model, the feed is infinitely adjustable on all three axes, and the machine further features rapid traverse for each axis. A major advantage is the Aktiv 3-axis digital readout. With this Heidenhain positioning control, you can enter dimensions and the machine will automatically move to the set position. An oil change has been performed. Mechanically and electrically checked. The Heidenhain digital readout makes operation easier and even more precise. Take this opportunity to view and test this machine under power on site.

Kondisi: hampir baru (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and infinitely variable feed – As-new condition Technical Specifications: >> Year of manufacture: 1987 Machine No. 2102-3536 >> Fixed angle table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head can be displaced on spindle carrier by 100 mm >> Vertical and horizontal quills - SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital display Heidenhain TNC113 >> Centralized electric lubrication >> Machine lamp >> Coolant system >> Operating manual, spare parts catalog About the machine: Bodeu R D I Sopfx Aarolr Offered here is a Deckel FP1 universal milling machine, year 1987, in original as-new condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed is infinitely variable on all three axes, and the machine also features rapid traverse in these axes. The active 3-axis digital readout is a major advantage. With this Heidenhain TNC113 system, you can enter target positions, and the machine will automatically move to them. The FP1 was used in a training facility and was only operated occasionally. An oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital display makes operation easier and even more precise. Take advantage of the opportunity to view and test this gem under power on site.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and stepless feed, light grey, excellent CONDITION Technical Data: >> Year of manufacture: ca. 1990, Machine No. 2102-5231 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Stepless feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable 100mm on spindle carrier >> Vertical and horizontal quill – SK40 >> Clamping system M16 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Electric central lubrication >> Coolant system >> Operating manual, spare parts list About the Machine: Offered here is a Deckel FP1 universal milling machine in very good condition, finished in light grey. The machine has minimal backlash, and all spindles move freely. Even at maximum spindle speeds, the milling machine runs very smoothly. This newer FP1 model features stepless feed adjustment in all three axes, and also has rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain path control, you can enter dimensions which the machine will move to automatically. The FP1 was located in a training workshop, where it was only used occasionally. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this gem under power on site. Bodpfx Aexu E R Isarelr The machine is immediately available.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP3 with 3-axis digital readout RSF Elektronik Z-530!! Technical specifications: >> Year of manufacture: approx. 1975, Machine no. 0681 >> Swivel-tilt table (newly overhauled) >> Spindle speed: 40 - 2000 rpm >> Feed and rapid traverse on 3 axes >> Drive power: 3 kW >> Travel (X/Y/Z): 500/300/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK-40 >> Clamping system M16 >> Weight approx. 1300 kg Accessories and features: >> 3-axis digital readout RSF Elektronik Z-530 >> Coolant system >> Central lubrication About the machine: Offered is a Deckel FP3 universal milling machine in good condition. All spindles move smoothly. Most of the bellows are new. The swivel-tilt table is as good as new. An oil change has been performed. Mechanically and electrically tested. The digital readout makes working easier and even more precise. Take the opportunity to inspect and test the Deckel on site under power. The machine is immediately available!!! Bledpexu E I Hefx Aaror