Beli Deckel Fp 4 At bekas (699)

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal milling machine Deckel FP2 in special paint finish with 3-axis Sony digital readout from university use!! Technical specifications: >> Machine No.: 4547 >> Swiveling tilting rotary table >> Spindle speed: 40 – 2000 rpm Chodswkhvnjpfx Ah Uod >> Feed and rapid traverse on all three axes >> Drive power: 2.2 kW >> Travel distances (X/Y/Z): 500/200/400 mm >> Equipment: vertical & horizontal spindle >> Extendable vertical and horizontal quill – SK-40 >> Drawbar system S20x2 >> Weight approx. 1100 kg Accessories and features: >> 3-axis Sony digital readout >> Coolant system About the machine: For sale is a universal milling machine Deckel FP2 in very good condition. It comes from a government facility and has seen very little use. The Deckel has minimal backlash and all spindles move smoothly. An oil change has been carried out. Mechanically and electrically tested. The Sony digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the Deckel on site under power.

Kondisi: perlu perbaikan (bekas), panjang pemakanan sumbu X: 500 mm, panjang umpan sumbu Y: 400 mm, panjang umpan sumbu Z: 400 mm, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 400 mm, kecepatan pemakanan sumbu X: 2.000 m/menit, laju pemakanan gandar Y: 2.000 m/menit, laju pemakanan sumbu Z: 2.000 m/menit, gores kuas bulu: 80 mm, diameter quill: 90 mm, kecepatan spindel (maks.): 3.150 rpm, kecepatan spindel (min.): 25 rpm, gerak cepat sumbu X: 3.000 m/menit, pergeseran cepat sumbu Y: 3.000 m/menit, pergerakan cepat sumbu Z: 3.000 m/menit, panjang meja: 700 mm, lebar meja: 430 mm, tinggi total: 2.100 mm, panjang total: 2.300 mm, lebar total: 2.000 mm, berat keseluruhan: 2.500 kg, beban meja: 300 kg, tegangan masuk: 400 V, lebar yang dibutuhkan: 3.000 mm, persyaratan ruang panjang: 3.500 mm, kebutuhan tinggi: 2.100 mm, panjang kabinet kontrol: 800 mm, lebar kabinet kontrol: 700 mm, Perlengkapan: dokumentasi / manual, DECKEL - FP4 NC milling machine With manual 3D table (rotatable) Note: Error message appears when moving the Z-axis The machine is already placed on a pallet and is ready for collection or shipping. Various tool holders can be purchased additionally upon request. Cedpfswh Itujx Ah Uohd We look forward to receiving your price offer.

Tahun pembuatan: 1974, Kondisi: hampir baru (bekas), As-new Deckel FP1 tool milling machine, overhauled by FPS, equipped with 3-axis Heidenhain digital readout, adjustable tilting table, and SK 40 spindle taper. Features spindle brake. Accessories include: tailstock and various collets. Machine is in excellent, ready-to-use condition. Can be demonstrated under power by appointment. Csdpfx Ahoq A Icqe Uehd

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1988, - Completely overhauled in 2022 - Heidenhain TNC320 CNC control - CNC or manual operation possible - Movable vertical milling head with extendable spindle - Counter bearing for long milling arbors - Hydraulic tool clamping - Automatic transmission - Automatic clamping on X, Y, and Z axes - Central automatic lubrication - Coolant system - Direct path measurement - Collision protection coupling on Y and Z axes - Year of manufacture: 1988 - Includes tool holders, drilling/milling tools & tool trolley Specifications Working Area: - X-axis (longitudinal): 485 mm - Y-axis (cross): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head manually movable on spindle block: 150 mm Main Drive: - Pole-changing three-phase brake motor: gearbox with forward/reverse - Power: 3.7 / 4.4 kW - Spindle speeds: 63 - 3150 rpm (18 steps) - Step increment: 1.25 - Tool holder: SK40 (M16) - Tool clamping: disc spring pack - Tool release: hydraulic Chodpswhk Ubefx Ah Ujd Feed Drive: - X-axis: 1 DC motor - Y & Z-axis: 1 DC motor - Ball screws: all axes - Feed rate: 2 - 3000 mm/min (programmable) - Rapid traverse X/Y/Z-axis: 3000 mm/min Table Slide: - T-slots quantity: 4 - T-slot width: 14H7 mm - T-slot spacing: 63 mm - Permissible load: approx. 600 kg Installation: - Footprint (with safety area): approx. 2300 x 2500 mm - Machine weight incl. vertical head and angle table: approx. 1830 kg - Operating voltage: 400 V - Total connected load: 12.5 kVA - Floor load: 3000 kg/m²

Kondisi: bekas, Flat belt pulley, toothed pulley, multi-belt pulley -Spare part from a Deckel machining center, type FP3A Csdjffh Nzopfx Ah Uohd -Diameter: 80 mm -Bore: 28 mm -Dimensions: 80/80/H61 mm -Weight: 1.2 kg

Kondisi: bekas, Milling machine Make: DECKEL Model: FP2 Technical Specifications Manufacturer: DECKEL Model: FP 2 Table size: 700 x 330 mm X-axis travel: 490 mm Y-axis travel: 390 mm Z-axis travel: 200 mm Spindle taper: ISO 40 18 spindle speeds: 40 – 2000 rpm 18 feed rates: 8 – 400 mm/min Motor power: 2.2 kW External dimensions: approx. W1100 x D1400 x H1600 mm Weight: approx. 1100 kg Features • 3-axis digital readout ACU-RITE • Various collets • Accessory package as per photos Cedpfxjv Uzzte Ah Ushd All information subject to change without notice. A demonstration is possible at any time in our showroom.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1984, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and stepless feed – Excellent CONDITION Technical data: >> Year of manufacture: 1984 Machine No. 2102-2601 >> Swivel-tilting rotary table >> Spindle speed: 40 - 2000 rpm >> Stepless feed on 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be displaced on spindle carrier by 100 mm Chjdpfxju Racrs Ah Ujd >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and equipment: Dpbyzb >> 3-axis digital readout Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts list About the machine: Offered here is a Universal Milling Machine Deckel FP1, year 1984, in excellent condition. The machine has very little backlash and all spindles move smoothly. Even at maximum speeds, the milling machine runs very quietly. On this newer FP1 model, the feed in all three axes is steplessly adjustable, and the machine also features rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain position control, you can input measurements, and the machine will automatically move to the set positions. The FP1 was located in a training workshop, where it was only occasionally used. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes working easier and even more precise. Take advantage of the opportunity to inspect and test this machine under power on site.

Kondisi: bekas, Tahun pembuatan: 1985, nomor mesin/kendaraan: 294, x-travel: 400 mm y-travel: 190 mm z-travel: 310 mm Table clamping surface: 280 x 750 mm Vertical spindle overhang: 115-575 mm Number of feed speeds: 16 Feed range: 11.2-355 mm/min Tool holder: SK 40 Number of spindle speeds: 16 Spindle speed range: 56-1800 rpm Total power requirement: 2.2 kW Space requirement approx.: 1550 x 1250 x 2000 mm Machine weight approx.: 1200 kg 1 used universal tool milling machine incl. ACURITE digital readout Cjdpsvcf Hpsfx Ah Uohd Equipped as follows: - Vertical milling head - Fixed angle table - Separate rotary table - Micrometer screws - Various milling cutters - Various tool holders Manufacturer’s description: - All operating elements on one side with movable control panel - Additional manual traverse adjustment enlarges the working area of the machine, even beyond the table surface - Fine graduation of the speed and feed gear, step increment of 1.25

Tahun pembuatan: 1975, Kondisi: baik (bekas), Deckel FP3L with adjustable angle table, vertical milling head, SK 40 spindle taper, S20x2 spindle mount. Good, operational condition. Can be demonstrated under power by appointment. Codpfoildwxjx Ah Uehd

Kondisi: baik (bekas), Deckel FP1 milling machine, manufactured in Germany by Friedrich Deckel AG, Munich. The machine is fully functional and in working condition. Chsdpfx Aew Amaijh Uod For further information, please contact us.

Kondisi: bekas, Rotary Encoder, Tachometer, Encoder -Spare part from a Deckel FP3A machining center Chedjffh N Aopfx Ah Ujd -Quantity: 1 tachometer available -Price: per piece -Dimensions: 83/122/H95 mm -Weight: 1.1 kg

Kondisi: sangat baik (bekas), panjang pemakanan sumbu X: 400 mm, panjang umpan sumbu Y: 200 mm, panjang umpan sumbu Z: 400 mm, For sale is a conventional milling machine from Deckel, model FP2. The machine is in excellent condition, overhauled by Harich (exact date unknown), and is immediately ready for operation. Technical data: Tool holder: SK 40 Travel X/Y/Z: 400 / 200 / 400 mm Spindle speed range: 40 - 2,000 rpm Vertical spindle stroke: 60 mm Horizontal spindle stroke: 100 mm Feed rates: 8 - 400 mm/rev Table size: 700 x 330 mm Motor power: 2.2 kW Connection: 400 V / 16 A plug Weight: approx. 1,300 kg Cjdpfx Ahju Ti Ake Ushd The vice and tools are NOT included in the offer but can be provided upon request. Transport and loading can be organized throughout Europe for an additional charge, if desired. All prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery trading PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or are you looking to sell your equipment? For further information or contact options, please visit our website.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal Milling Machine Deckel FP1 with 3-Axis Digital Readout RSF, Overhauled in 2006, TOP Condition Technical Data: >> Machine No. 53819/08 >> Fixed angle table >> Spindle speed: 40 – 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travels X/Y/Z: 300/150/340 mm >> Vertical quill and horizontal quill – SK40 taper >> Spindle brake >> Drawbar system S20x2 >> Weight approx. 700 kg Chsdpjvb Ud Usfx Ah Ued Accessories and Equipment: >> 3-axis digital readout by RSF Elektronik >> Coolant system >> Machine leveling feet About the Machine: Offered here is a Deckel FP1 universal milling machine in very good condition. The Deckel features minimal backlash and all spindles move easily. An oil change has been carried out. The FP1 was completely overhauled by Huttelmaier in 2006 and has seen little use since. The RSF digital readout makes operation easier and more precise. Take advantage of the opportunity to view and test this machine under power on site.

Kondisi: bekas, x-axis travel 800 mm y-axis travel 400 mm z-axis travel 300 mm Heidenhain digital readout Clamping surface of table 1000 x 520 mm Spindle speed range 40 to 2000 rpm Spindle taper SK 40 Total power requirement 2.2 kW Machine weight approx. 2.2 t Required floor space approx. 1700 x 1600 x 1800 mm Chjdeqpl Uuepfx Ah Ujd Deckel FP 2 B - Skew bed in travelling column design Universal swivel/tilt table including various SK40 holders, draw-in thread S20x2 Collet chuck holder Machine was overhauled at a cost of approx. €24,000.00

Kondisi: sangat baik (bekas), Tahun pembuatan: 1980, Fungsionalitas: berfungsi sepenuhnya, Deckel FP 3 Universal Milling Machine *Partially Overhauled* Item Number: 07-07-090 Manufacturer: Deckel Delivery time: on request Very good overall condition Machine partially overhauled Delivery time: on request – subject to prior sale Year of manufacture: approx. 1980 Dimensions (L x W x H): approx. 2000 x 1600 x 1900 mm Weight: approx. 1500 kg Digital readout: 3-axis Sino digital display *New* Travel distances: X-axis: approx. 500 mm Chodpfx Ahsrivr Ts Ujd Y-axis: approx. 300 mm Z-axis: approx. 380 mm Clamping surface: approx. 800 x 420 mm Spindle: Speed range: approx. 40–2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8 kW Tool clamping: manual Feeds & rapid traverse: on all 3 axes Feed range: approx. 10–500 mm/min Rapid traverse: approx. 1.5 m/min Accessories: Vertical & horizontal milling attachments Coolant system *New* Complete documentation Various clamping keys Horizontal spindle cover Safety handwheels 3-axis SINO digital display *New* Tilting swivel table Work lamp *New* Machine feet *New* Additional accessories on request Price and further technical details on request

Kondisi: bekas,

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, -KOM 3149- Cjdpfx Ahjwxxd Sj Uohd Offered here is a slotting head for an FP2 Deckel milling machine. The slotting head can be rotated 360 degrees on the flange plate. All guide surfaces are in very good condition. The dimensions of the slotting head can be found in the last picture.

Tahun pembuatan: 1987, Kondisi: baik (bekas), en001 Chjdpfef Nf Anox Ah Ujd

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, en-001 Cjdsu Tuk Hopfx Ah Ushd

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 300 mm, jarak lintasan sumbu Y: 160 mm, jarak gerak sumbu Z: 340 mm, kecepatan spindel (maks.): 2.000 rpm, kecepatan spindel (min.): 40 rpm, kecepatan rotasi (maks.): 2.000 rpm, kecepatan rotasi (min.): 40 rpm, 2-axis digital readout display (Heidenhain) Spindle taper: SK40 (S20x2) Travel distances: X 300 / Y 160 / Z 340 mm Codpfsvnr Hyox Ah Ujhd Speed range: 40 - 2000 rpm (2 speed gearbox stages) Feed rate steplessly adjustable The machine is in well-maintained condition and can be inspected under power on site. Includes comprehensive accessories: - Machine vice - Operating manual / electrical circuit diagram / spare parts list - Collet set (S20x2) incl. SK40 collet chuck - Further accessories available on request.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1980, Fungsionalitas: berfungsi sepenuhnya, Werkzeug Milling Machine Deckel FP 3 *Partially Refurbished* Article Number: 07-07-091 Manufacturer: Deckel Very good overall condition Machine partially refurbished Delivery time: Immediately available, in-stock machine Year of manufacture: approx. 1980 Dimensions (L x W x H): approx. 2000 x 1600 x 1900 mm Weight: approx. 1500 kg Digital Readout: 3-axis digital display Sino *New* Chedpfxjvupuuo Ah Ujd Travel distances: X-axis: approx. 500 mm Y-axis: approx. 300 mm Z-axis: approx. 380 mm Table clamping surface: approx. 800 x 420 mm Spindle: Speed range: approx. 40–2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8 kW Tool clamping: manual Feeds & rapid traverse: all 3 axes Feed range: approx. 10–500 mm/min Rapid traverse: approx. 1.5 m/min Accessories: Vertical & horizontal milling attachment Coolant device *New* Complete documentation Various clamping wrenches Horizontal spindle protective cover Safety handwheels 3-axis digital display SINO *New* Machine feet *New* Work lamp *New* Additional accessories on request Price and further technical data available on request

Kondisi: sangat baik (bekas), Tahun pembuatan: 1985, Fungsionalitas: berfungsi sepenuhnya, Universal Milling Machine Deckel FP1 with New 3-Axis K&C Digital Readout and Stepless Feed on All Axes – Excellent Condition Technical Data: >> Year of manufacture: 1985 Machine no.: 2102-2867 >> Swivel-tilt rotary table (recently planed) >> Spindle speed range: 40 – 2000 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse on all 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travels (X/Y/Z): 300/160/340 mm >> Vertical milling head can be shifted 100 mm on the column >> Vertical and horizontal quill – SK40 taper >> Drawbar system: M16 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout K+C – newly installed, with manufacturer warranty and user manual. Display unit: reference points, set zero points, input of coordinates, mm/inch switching, absolute/incremental coordinates, circle functions, hole patterns, radius milling functions, and more. >> Coolant system >> Operating manual, spare parts diagram About the machine: Csdpfet Aarpox Ah Uohd Offered is a universal milling machine Deckel FP1 from 1985 in excellent condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum spindle speed, the milling machine runs very quietly. This newer FP1 model features stepless feed regulation on all three axes, as well as rapid traverse on these axes. An oil change has been carried out. Mechanically and electrically tested. The new digital readout from K&C makes operation easier and even more precise. Arrange a viewing and live test operation on site under power.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1978, Fungsionalitas: berfungsi sepenuhnya, Deckel FP 2 Tool Milling Machine *Partially Overhauled* Item number: 07-07-112 Manufacturer: Deckel Chodpewfxggjfx Ah Uod Very good overall condition Machine partially overhauled Delivery time: on request, subject to prior sale Year of manufacture: approx. 1978 Dimensions (L x W x H): approx. 2000 x 1500 x 1800 mm Weight: approx. 800 kg Digital readout: 3-axis digital readout Sino *new* Travel distances: X-axis: approx. 400 mm Y-axis: approx. 200 mm Z-axis: approx. 400 mm Table clamping surface: approx. 700 x 350 mm Spindle: Speed range: approx. 40–2000 rpm Tool holder: ISO 40 Drive power: approx. 2.2 kW Tool clamping: manual Feeds & rapid traverses: in all 3 axes Feed range: approx. 8–400 mm/min Rapid traverse: approx. 1.5 m/min Equipment: - Vertical & horizontal milling device - Work lamp *new* - Coolant system *new* - Complete documentation - Various clamping wrenches - 3-axis digital readout SINO *new* - Spindle protection cap - Horizontal spindle cover cap - Chip tray - Safety handwheels - Machine feet *new* Further accessories on request Price and further technical details on request

Kondisi: sangat baik (bekas), Tahun pembuatan: 1978, Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP1 with 3-axis K&C digital readout, stepless feed, in light grey, excellent condition Technical Data: >> Year of manufacture: 1978 Machine No. 2101-0465 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Stepless feed on 2 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Rapid traverse >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical quill and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 700 kg Accessories and Features: >> 3-axis K&C digital display newly installed, with manufacturer's warranty and operating manual. Display unit: setting of reference points and zero points, coordinate input, mm/inch selection, absolute or incremental coordinates, circle functions, hole patterns, radius milling functions, etc. >> Coolant system Chjdpfet Aav Ijx Ah Usd About the Machine: Offered here is a Universal Milling Machine Deckel FP1 in excellent condition. The machine has minimal play in the cranks and all spindles move smoothly. All bellows are new. This later FP1 model features stepless feed on two axes, and also has rapid traverse. An oil change has been carried out. The machine has been mechanically and electrically tested. The new digital display from K&C makes work easier and even more precise. You are welcome to view and test the machine under power at our premises.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP1 with 3-axis Heidenhain digital readout Original condition!!! Technical data: >> Machine No. 56560/08 Year of manufacture: approx. 1975 >> Fixed angular table >> Spindle speeds: 40 - 2000 rpm >> Feed on 2 axes >> Motor power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm Chedpju Nvxmefx Ah Usd >> Vertical quill SK40 and horizontal quill SK40 >> Drawbar system S20x2 >> Weight approx. 700 kg Accessories & equipment: >> 3-axis Heidenhain digital readout >> Coolant system About the machine: For sale is a Deckel FP1 universal milling machine in very good original condition. The Deckel has minimal backlash on the handwheels and all spindles move smoothly. An oil change has been carried out. Mechanically and electrically inspected. The Heidenhain digital readout makes work easier and more precise. You are welcome to view and test the Deckel under power on site.