Beli Demag Ac 50 bekas (507)

Tahun pembuatan: 2006, Kondisi: baik (bekas), nomor mesin/kendaraan: WIZ, DEMAG KBK Crane System – Crane Runway Approx. 15 x 4 m Steel Structure (Space Requirement): 13.2 x 5.5 m Payload / Lifting Capacity: 500 KG (0.5 t) Technical Data of the System: - Crane runway made from Demag KBK2 profile rails - External dimensions of steel structure (space requirement): 13.2 x 5.5 m - Steel structure height: 4.85 m, Clearance under steel structure: 4.65 m - Clearance under crane runway: 4.4 m, Clearance under bridge: 4 m, Hook height: 3.8 m - Column spacing: 4 + 4 + 4.9 m The system is delivered complete: - KBK rails, rail connectors - Travel carriages, end plates, cable festoon system, brackets/suspensions, etc. - Complete steel structure (HEA180) - Including Demag DC 500 KG electric chain hoist The crane is dismantled and available immediately. Location: 75053 Gondelsheim, Germany Good condition, see photos (covered in oil mist – can be easily cleaned) Iodpoiwdaqsfx Aahstr Shipping via freight forwarder or collection by appointment only Demag KBK1, KBK2 and KBK3 rails are available from stock!

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1989, nomor mesin/kendaraan: ROD396, DEMAG KBK Overhead Crane dengan rel crane berukuran sekitar 19,5x7 m (2x jembatan 7 m) Daya angkut / kapasitas angkat 2x 250 kg - 0,25 ton Iodpexdvn Ajfx Aahjtr Data teknis instalasi: Rel crane dari profil Demag KBK2, satu sisi dengan rel KBKII-R dan konduktor listrik terintegrasi Instalasi dikirim lengkap: Rel KBK, sambungan rel, bogie, pelat ujung, breket/gantungan, dll. Termasuk 2 jembatan masing-masing 250 kg Termasuk 2x 250 kg Demag DC chain hoist Crane sudah dibongkar dan siap kirim segera Kondisi bekas pakai, lihat foto Lokasi barang: 75053 Gondelsheim Pengiriman melalui ekspedisi atau pengambilan sendiri hanya dengan perjanjian Rel Demag KBK1, KBK2, dan KBK3 tersedia di stok! Tersedia juga unit KBK lain. Daya angkut 125 kg - 1600 kg Silakan ajukan permintaan penawaran untuk rel crane sesuai kapasitas dan ukuran yang diinginkan tanpa kewajiban.

Tahun pembuatan: 2002, Kondisi: baik (bekas), nomor mesin/kendaraan: SIKBK, Demag KBK crane runway approximately 10x6 m Load capacity / lifting capacity: 500 kg (0.5 t) Technical data of the system: Crane runway made of Demag KBK2 rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable trolley, brackets/suspensions, etc. Including Demag DK2 500 kg electric chain hoist Itjdjmqf Nbepfx Aahsr Crane is dismantled and immediately available Used condition, see pictures Item location: 75053 Gondelsheim Shipping by freight carrier or collection by appointment only Demag KBK1, KBK2, and KBK3 rails available from stock! Other KBK systems also in stock. Load capacities from 125 kg to 1600 kg. Please inquire about your crane runway with desired cantilever and dimensions.

Tahun pembuatan: 1985, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: (20020324 EG) - VK-RES, DEMAG KBK crane system with runway dimensions approx. 16.5x7m (7m bridge – double-girder crane) Load capacity / lifting capacity: 500 kg – 0.5 t Technical data of the system: Crane runway made of Demag KBK2 rails System is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable trolley, brackets/hangers, etc. Iodpfx Aasty S I Eshotr incl. Demag PK2 500KG chain hoist – lifting height approx. 4.5m Crane is dismantled and available immediately Used condition, see photos Location: 75053 Gondelsheim Shipping via freight carrier or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems available as well. Load capacity: 125kg – 1600kg Please feel free to send a non-binding inquiry with your required crane runway load capacity and dimensions.

Tahun pembuatan: 1989, Kondisi: baik (bekas), nomor mesin/kendaraan: TH2000/9953, DEMAG KBK overhead crane track with approximate dimensions 9x4m (4m bridge) Multiple units of this crane are available! Payload / Lifting capacity: 500 KG - 0.5 t Technical data of the system: Crane runway made of Demag KBK2 rails The system is supplied complete: KBK rails, rail connectors, trolleys, end plates, brackets/hangers, etc. Including 500 kg steel chain hoist - lifting height approx. 3.5 m The crane is dismantled and immediately available Used condition, see photos Item location: 75053 Gondelsheim Shipping by freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are stock items! Ijdpfxjv Iakae Aahstr Other KBK systems also available in stock. Payload from 125 kg to 1600 kg Please send us your non-binding enquiry for crane tracks specifying required capacity and dimensions.

Tahun pembuatan: 2013, Kondisi: hampir baru (bekas), nomor mesin/kendaraan: TH2000Messraum, Demag KBK crane runway (crane track) 9.3 x 5.3 m (bridge travel approx. 5 m) The crane is also available in a range of other dimensions, multiple units in stock featuring raised trolleys. Iodpfx Aaov Iai Nshjtr Lifting capacity: 500 kg Technical data: - Crane runway made of Demag KBK2 profiles - Equipped with raised trolley system – crane girder is positioned between the two running rails for maximum lifting height - With internal power supply! The system is supplied complete: - KBK rails, rail connectors, trolleys, end caps, cable chain, suspension brackets/hangers, etc. - Incl. Demag DK chain hoist, 500 kg (older model) Crane is dismantled and available immediately Various cranes in stock Very good condition; see photos Item location: 75053 Gondelsheim Shipping by freight forwarder or collection strictly by prior arrangement Demag KBK1, KBK2, and KBK3 rails are available from stock! Additional KBK systems in stock. Load capacities from 125 kg to 1,600 kg Please enquire about your required crane track regarding load capacity and dimensions without obligation.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, jam operasional: 19.884 h, Data Umum Berat mesin: 27.000 kg Itodpfx Aaex H U Ehehor Tinggi pengukuran: 278 mm Dimensi Panjang mesin: 890 mm Unit Injeksi Diameter ulir: 60 mm Unit Penjepit Gaya penjepit: 3.500 kN DEMAG El-Exis SP 350/820-2500 ini diproduksi pada tahun 2019. Mesin cetak injeksi listrik yang tangguh ini dilengkapi dengan diameter ulir 60 mm, gaya penjepit 3.500 kN, dan jarak tie bar 820 mm. Dengan dimensi 8,90 x 2,21 x 2,78 meter dan berat 27.000 kg, pertimbangkan kesempatan untuk membeli mesin cetak injeksi listrik DEMAG El-Exis SP 350/820-2500 ini. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Jenis Aplikasi Cetak Injeksi

Kondisi: bekas, Tahun pembuatan: 2010, gaya penjepit: 320 kN, volume langkah: 891 cm³, tekanan injeksi: 2.420 batang, berat keseluruhan: 17.300 kg, jam kerja: 47.000 h, diameter konveyor sekrup: 60 mm, Dasar Pengiriman: ex lokasi Waktu Pengiriman: sesuai kesepakatan Itjdpox E A Twsfx Aahjr Syarat Pembayaran: 100% sebelum pengambilan mesin, bersih tanpa potongan

Kondisi: baik (bekas), Tahun pembuatan: 1998, jam operasional: 65.000 h, gaya penjepit: 3.300 kN, diameter sekrup: 70 mm, jarak antara tiang: 710 mm, volume langkah: 1.039 cm³, tekanan injeksi: 1.400 batang, berat injeksi: 940 g,

Tahun pembuatan: 1993, Kondisi: siap digunakan (bekas), Several used injection moulding machines from Arburg, Demag, and Stübbe are available. 1) Arburg 470C 1300-575, year of manufacture: 1993, clamping force: 1300 kN, shot weight: 270 g, mould height min./max.: 300 mm / 950 mm, opening stroke: 650 mm, tie bar distance: 470 mm x 470 mm, screw diameter: 50 mm, core pulls: 3. 2) Stübbe S110/345, year of manufacture: 1976, clamping force: 1000 kN, shot weight: 140 g, mould height min./max.: 180 mm / 480 mm, opening stroke: 320 mm, tie bar distance: 360 mm x 355 mm, screw diameter: 40 mm, core pulls: 1. 3) Demag D 150/452 NC III, year of manufacture: 1990, clamping force: 1500 kN, shot weight: 207 g, mould height min./max.: 320 mm / 550 mm, opening stroke: 430 mm, tie bar distance: 460 mm x 460 mm, screw diameter: 45 mm, core pulls: 1. 4) Demag D100-275 NC II P, year of manufacture: 1989, clamping force: 1000 kN, shot weight: 130 g, mould height min./max.: 200 mm / 400 mm, opening stroke: 350 mm, tie bar distance: 400 mm x 400 mm, screw diameter: 38 mm, core pulls: 1. 5) Arburg Allrounder 270M 250-75, year of manufacture: 1990, clamping force: 250 kN, shot weight: 25 g, min. mould height: 225 mm, opening stroke: 325 mm, tie bar distance: 270 mm x 270 mm, screw diameter: 20 mm, core pulls: 1. 6) Demag D250-730 NC III, year of manufacture: 1991, clamping force: 2500 kN, shot weight: 320 g, mould height min./max.: 310 mm / 710 mm, opening stroke: 600 mm, tie bar distance: 560 mm x 560 mm, screw diameter: 52 mm, core pulls: 1. 7) Arburg 320 850-210, year of manufacture: 1986, clamping force: 850 kN, shot weight: 108 g, mould height min./max.: 250 mm / 625 mm, opening stroke: 375 mm, tie bar distance: 320 mm x 320 mm, screw diameter: 35 mm, core pulls: 0. On-site inspection possible. Machines can be sold individually. Isdpfxox Hz Sbo Aahotr

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Sumitomo Demag Systec 350/720-2300 / Production line with Wittmann-Demag DR853 robot Iodpfjxzzyxox Aahetr Year of manufacture: 2015 Injection Unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cc Clamping Unit: Clamping force: 350 t Tie bar spacing: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping system: toggle lever Control system: NC5 Additional Equipment: Euromap 67 Robot interface Control system with air valve Control system with 5 hot runner zones Hardened injection unit - bimetallic barrel Moog proportional valve on injection unit – precise injection Parallel movements Central lubrication 3 variable-displacement hydraulic pumps Built-in printer The machine has been regularly serviced by authorized Sumitomo Demag service Robot Wittmann-Demag DR853 Year of manufacture: 2016 6-axis robot: 5 axes driven by servo motors (electric): X, telescopic Y, Z, B, C Axis travel ranges: X-1200, Y-2400, Z-4000 Touchscreen control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor available at extra cost Dimensions: Weight: 15,750 kg Length/Width/Height: 8.26x2.01x2.27 m All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Tahun pembuatan: 1984, Kondisi: bekas, nomor mesin/kendaraan: 20020310-311, DEMAG KBK 2 crane runway system, approx. 50m x 8m Other lengths and widths available upon request! Load capacity / lifting capacity: 2x 500 kg - 0.5 t Technical data of the system: Crane runway made of Demag KBK2 rails with integrated power supply and 3 travel drives System is delivered complete: KBK rails, rail connectors, trolleys, end plates, hangers/suspensions, etc. 2 bridge cranes each including: 1x Demag PK 500kg electric chain hoist per bridge + 3 travel drives each Lifting height approx. 5m Crane is dismantled and available immediately Isdpfsty S Dgsx Aahotr Used condition, see photos Item location: 75053 Gondelsheim Shipping by freight forwarder or collection by appointment only Demag KBK1, KBK2 and KBK3 rails in stock! Other KBK systems also available. Load capacities from 125kg to 1,600kg. Please inquire about your crane runway with cantilever and dimensions.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, jam operasional: 28.076 h, Data Umum Ijdox H U Enopfx Aahstr Berat mesin: 27.000 kg Tinggi: 2.780 mm Unit Penjepit Gaya penjepit: 4.200 kN Unit Injeksi Diameter sekrup: 60 mm Dimensi Panjang mesin: 8.900 mm DEMAG El-Exis SP 420/820-2500 ini diproduksi pada tahun 2018. Sebuah mesin injeksi listrik yang kokoh, dilengkapi dengan diameter sekrup 60 mm, volume dosing maksimum 891 ccm, serta gaya penjepit 4.200 kN. Jarak antar tie bar adalah 820 mm. Jika Anda mencari mesin injeksi berkualitas tinggi, pertimbangkan DEMAG El-Exis SP 420/820-2500 yang kami tawarkan – hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Injection Moulding

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, gaya penjepit: 1.500 kN, diameter sekrup: 45 mm, volume langkah: 305 cm³, tekanan injeksi: 2.050 batang, berat injeksi: 270 g, tinggi cetakan (min.): 275 mm, Demag IntElect 150/520-610 General Data Year of manufacture: 2007 Weight: 6,900 kg Dimensions (L × W × H): 5.5 × 1.5 × 2.1 (2.3) m Control system: NC4 Operating hours: 26,500 h Clamping Unit Clamping system: 150/... Clamping force: 150 t Platen dimensions (H × V): 770 × 770 mm Tie bar spacing (H × V): 520 × 520 mm Mould height (min.–max.): 275 mm (max. increased) Max. daylight between platens: 1,180 mm Ejector stroke: 125 mm Ejector force: 35 kN Injection Unit Ijdpfxoxxrr Tj Aahjtr Injection unit type: …/610 Screw diameter: 45 mm Screw L/D ratio: 20 Shot volume: 305 cm³ Shot weight: 270 g Specific injection pressure: 2,050 bar Wear-resistant screw; bimetallic cylinder, standard L:D ratio Check valve (RSP), 3-piece, ring design Increased injection speed: 300 mm/s Additional Equipment Counter reading: 26,500 h - Increased maximum mould mounting height (minimum unchanged, maximum increased) - Wear-resistant screw; bimetallic cylinder; standard L:D; 45 mm screw diameter - Check valve (RSP), 3-piece, ring version - Electrical and hydraulic interface for connecting 2 hydraulic cores on the moving mould platen via a separate hydraulic unit - Increased injection speed (300 mm/s) - Increased maximum mould mounting height (minimum unchanged, maximum increased) Offer includes injection moulding machine only

Kondisi: bekas, Tahun pembuatan: 2004, jam operasional: 78.000 h, 1,0 unit mesin injection moulding bekas dengan robot Pabrikan: DEMAG Tipe: SYSTEM 650/1000-5200 Tahun produksi: 2004 Gaya penjepit: 650 ton Jarak tie bar: 1.000 x 900 mm Diameter screw: 95 mm Itodpfx Aaoxauycjher Volume injeksi: 2.835 ccm³ Berat produk injeksi: 2.560 g/PS Kontrol: NC 4 Perlengkapan: - Robot pabrikan: DEMAG, tipe: DR633-1131 S3, tahun 2004 - 4 core pull

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 15.000 kN, diameter sekrup: 145 mm, tekanan injeksi: 1.454 batang, langkah pembukaan: 2.900 mm, tinggi alat: 1.400 mm, TECHNICAL DETAILS Clamping force: 15,000 kN Platen dimensions (H x V): 2,150 x 1,880 mm Tie bar spacing (H x V): 1,500 x 1,250 mm Min. mould height: 700 mm Max. mould height: 1,400 mm Max. opening stroke: 2,900 mm Screw diameter: 145 mm Shot volume: 10,981 cm³ Shot weight (PS): 9,880 g Injection pressure: 1,454 bar MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 14,400 x 3,400 x 2,900 mm Net weight (with control cabinet): 74,000 + 21,000 kg Electrical & Hydraulic Equipment Rated pump motor power: 165 kW Itsdpfxsxup T Ho Aahsr Heating capacity: 97 kW EQUIPMENT Wittmann W 753 robot (year of manufacture 2008) Safety enclosure Conveyor belt Service history notes: 2010: New screw with RSP and barrel 2015: New Ibed 2015: New wiring plate 2017: New motor and 2nd pump 2017: New injection side BS cylinder piston with seals 2017: Replacement of oil cooler circulation pump 2017: Replacement of robotic teach pendant 2018: Replacement of pumps P1 + P3 (at 65,800 hours) 2018: Hydraulic oil replacement

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Sumitomo Demag Systec 350/720-2300 / Production Line with Wittmann-Demag DR833 Robot Year of manufacture: 2012 Injection unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cm³ Clamping unit: Clamping force: 350 t Tie bar spacing: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC5 Additional equipment: Euromap 67 Robot interface Air valve x 5 Hydraulic core pull with proportional valve, controlled x 1 Hot runner controller x 5 Injection unit hardened – bimetal Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication Itsdpfx Aoxzzyloahor 3 hydraulic pumps with variable output Integrated printer Machine regularly serviced by authorized Sumitomo Demag service Robot Wittmann-Demag DR833 Year of manufacture: 2011 4-axis robot: 3 axes driven by servo motors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Travel range in axes: X-900, Y-1600, Z-3000 Touch control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor possible at additional cost Dimensions: Weight: 15,750 kg Length/width/height: 8.26x2.01x2.27 m All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, de Isdpsx D Nwqsfx Aahstr

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, jam operasional: 15.642 h, de: Allgemeine Daten Maße Breite 1810 mm Maße Tiefe 6950 mm Maße Höhe 2213 mm Maschinengewicht 15750 kg Spritzgießeinheit Schneckendurchmesser 45 mm Schließeinheit Schließkraft 350 t Medien Interne Kühlung Ja Zusätzliche Ausstattung Iodpfx Asx D Hnteahstr Fanuc Roboter Diese SUMITOMO SHI DEMAG Systec SP 350/720-840 wurde 2015 hergestellt. Es handelt sich um eine hydraulische Spritzgießmaschine, die ideal für die präzise Kunststoffverarbeitung geeignet ist. Nutzen Sie die Gelegenheit, diese SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulische Spritzgießmaschine zu erwerben. Kontaktieren Sie uns für weitere Informationen. Anwendungsbereiche Spritzgießen

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 27.551 h, General Data Abmessungen Breite 1260 mm Abmessungen Tiefe 6460 mm Abmessungen Höhe 2100 mm Ijdpfx Aajx D Hnyehstr Schließeinheit Schließkraft 2200 kN Zusätzliche Ausstattung Sepro Roboter SDR 22 Diese SUMITOMO SHI DEMAG IntElect 220/610-750 smart wurde 2013 hergestellt. Es handelt sich um eine vollelektrische Spritzgießmaschine, die für ihre Präzision und Effizienz bekannt ist. Ideal für Anwender, die ihre Produktionskapazitäten mit zuverlässiger Technologie erweitern möchten. Kontaktieren Sie uns für weitere Informationen. Anwendungsbereiche Spritzgießen

Tahun pembuatan: 2019, jam operasional: 17.716 h, Kondisi: siap digunakan (bekas), Data Umum Iedpfjx D Nx Iex Aahotr Lebar pengukuran: 1920 cm Kedalaman pengukuran: 7750 cm Berat mesin: 26210 kg Tinggi pengukuran: 2410 mm SUMITOMO SHI DEMAG El-Exis SP 350/820-920 diproduksi pada tahun 2019. Mesin injection moulding listrik yang kokoh dengan diameter sekrup 40 mm dan gaya penahan 3.500 kN. Mesin ini telah beroperasi selama 17.716 jam dengan 12.440.761 siklus, memastikan kapasitas produksi yang tinggi. Jangan lewatkan kesempatan untuk membeli mesin injection moulding listrik SUMITOMO SHI DEMAG El-Exis SP 350/820-920 ini. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Injection Moulding

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), SUMITOMO SHI DEMAG El-Exis S 250/630-1450 ini diproduksi pada tahun 2005. Mesin ini dilengkapi akumulator sentral untuk injeksi berkecepatan tinggi dan batang penegang berlapis krom. Daya penggerak pompa sebesar 22,0 kW, dengan tegangan utama 400 V/50 Hz. Dilengkapi dengan tampilan data berwarna dengan antarmuka VGA, pendingin oli, dan penggerak sekrup elektrik. Pertimbangkan kesempatan untuk membeli mesin cetak injeksi hidrolik SUMITOMO SHI DEMAG El-Exis S 250/630-1450 ini. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Injection Moulding Ijdpsx D Rqrefx Aahstr

Tahun pembuatan: 2019, jam operasional: 18.138 h, Kondisi: siap digunakan (bekas), Data Umum Ukuran lebar: 1920 cm Ukuran panjang: 7750 cm Ukuran tinggi: 2410 cm Berat mesin: 25.340 kg Ijdpfx Aasx D Nxzshstr SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 ini diproduksi pada tahun 2019. Mesin injeksi moulding elektrik yang kokoh dengan diameter screw 50 mm, gaya penjepit 3.500 kN, dan jarak antar tiebar 820 mm. Mesin telah beroperasi selama 18.138 jam dengan 12.875.090 siklus. Jika Anda mencari kemampuan moulding berkualitas tinggi, pertimbangkan SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 yang kami tawarkan. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Injeksi Moulding

Tahun pembuatan: 1995, Kondisi: siap digunakan (bekas), Data Umum Berat mesin: 13.500 kg Tinggi: 2.300 mm Dimensi Panjang mesin: 6.400 mm Iodpjx D Dn Rjfx Aahetr DEMAG Ergotech System 250 - 1450 ini diproduksi pada tahun 1995. Mesin injeksi hidrolik yang kokoh ini memiliki gaya penahan sebesar 2.500 kN dan diameter ulir 70 mm. Dilengkapi dengan robot Sepro, pompa kontrol hidrolik DFE hemat energi, serta desain modular untuk aplikasi yang fleksibel. Dimensi mesin adalah 6,4 × 1,9 × 2,3 m dan dilengkapi terminal operator lengkap dengan layar LCD 10 inci. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Jenis Aplikasi Injection Moulding (Injeksi Plastik)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, Unit Injeksi Diameter sekrup: 80 mm Berat tembakan: 1212 cm³ Volume langkah: 1212 cm³ Tekanan injeksi: 1877 bar Unit Pengunci Gaya penguncian: 420 kN Langkah ejektor: 230 mm Peralatan Tambahan Robot SEPRO Termasuk Itjdpfx Aex D N E Isahsr DEMAG Ergotech System 420-1450 ini diproduksi pada tahun 2004. Mesin injeksi hidrolik ini sangat ideal untuk pengolahan plastik presisi. Manfaatkan kesempatan untuk membeli mesin injeksi hidrolik DEMAG Ergotech System 420-1450 ini. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Injection moulding