Beli Demag Pk 5 Nf bekas (503)

Kondisi: baru, en-01 Kedpfx Aoyvvbcog Rjlp

Tahun pembuatan: 2019, jam operasional: 17.716 h, Kondisi: siap digunakan (bekas), Data Umum Lebar pengukuran: 1920 cm Kedalaman pengukuran: 7750 cm Berat mesin: 26210 kg Tinggi pengukuran: 2410 mm SUMITOMO SHI DEMAG El-Exis SP 350/820-920 diproduksi pada tahun 2019. Mesin injection moulding listrik yang kokoh dengan diameter sekrup 40 mm dan gaya penahan 3.500 kN. Mesin ini telah beroperasi selama 17.716 jam dengan 12.440.761 siklus, memastikan kapasitas produksi yang tinggi. Jangan lewatkan kesempatan untuk membeli mesin injection moulding listrik SUMITOMO SHI DEMAG El-Exis SP 350/820-920 ini. Hubungi kami untuk informasi lebih lanjut. Kedpfx Aex D Nx Ieg Rslp Jenis Aplikasi Injection Moulding

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, jam operasional: 15.642 h, diameter sekrup: 45 mm, tinggi total: 2.213 mm, berat keseluruhan: 15.750 kg, This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection moulding machine, ideal for precise plastics processing. Take advantage of this opportunity to purchase the SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection moulding machine. Please contact us for further information. Additional equipment • Fanuc robot Machine benefits Quality-related machine benefits • Process data acquisition, mould protection Technical machine benefits • Minimum mould height: 350 mm / maximum mould height: 745 mm • Electronic main connection: 3/400 V 50Hz • Programmable sequence, high-dynamic feed speed, hydraulic pressure-dependent hold pressure control, digital/wear-free position measuring system. Additional information Standard equipment: Support of the movable platen via linear guides/ Ejector with short/long stroke/ Interface for external printer (hard copy)/ Individual motion optimization of the axes (activeAdjust)/ Four-stage mould closing and four-stage mould opening sequence/ Increased pump drive power II (59.0 kW)/ Mains voltage 400 V ±10% / 50 Hz, 3 phases + N + PE/ Separate mains connection for drive / heating/ Coloured data display/ Enhanced oil cooler (cooling water supply up to 35 °C)/ Separate water connections for mould and machine cooling/ Basic version Europe/ Corrosion protection/ Painting: Jet Black (RAL9005): machine bed with built-in parts, lower control cabinet/ Signal White (RAL9003): clamping unit, injection unit, nozzle guard/ Signal White (RAL9003): fixed safety devices, upper control cabinet/ Signal White (RAL9003): protective doors/ Textured surfaces: Elastic machine mounts/ Digital and wear-free position measuring system (ultrasonic/high-resolution encoders for injection, mould and ejector movement)/ Mould connection dimensions type E (EUROMAP March '96)/ Centre diameter fixed platen: 160 mm/ Centre diameter moving platen: 160 mm/ Without side ejector plate/ Standard mould installation height: Min: 350 mm/ Max: 745 mm/ Standard closing speed (movements only with protective door closed)/ Ejector with position control (P/F+V independently programmable, parallel to mould movement)/ Oil lubrication of toggle/ Injection unit/ Optional equipment: Servo-controlled pump (activeDrive)/ Emergency stop switch on the operator side/ Separate opener for fine filtration in bypass (activeCool&Clean)/ Socket 1 x Schuko (230V / 10A), switchable via main switch/ Socket IECEE 3Ph / 400V-16A, switchable via main switch/ Signal beacon/ Operation with protective door open (operator side)/ 6 pneumatic 5/2-way valves on the moving platen (programmable)/ 6 pneumatic 5/2-way valves on the fixed platen (programmable)/ Central maintenance unit for pneumatic valves/ 1-circuit core pull via proportional valve (programmable, with check valves)/ Manual pressure relief for 1-circuit core pull/ Widened protective cover on operator side (250 mm)/ Hot runner control 12 zones, integrated (2.75 kW)/ Pneumatic hot runner nozzle control (1x 5/2-way valve)/ Clamping force control/ Kjdpfx Aex D Hntog Rslp Active mould protection via sensor during closing (activeQ)/ Manually adjustable monitoring switch for mould-open position/ Central grease lubrication (manual)/ Material hopper for automatic filling/ Hopper shut-off with emptying option/

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 27.551 h, gaya penjepit: 2.200 kN, tinggi total: 2.100 mm, This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It is an all-electric injection moulding machine renowned for its precision and efficiency. Ideal for anyone looking to expand their production capabilities with reliable technology. Contact us for further information. Additional Equipment • Sepro Robot SDR 22 Machine Advantages Technical Specifications • Screw diameter: 45 mm / screw geometry: standard / l/d ratio: 20 / specific injection pressure: 2150 bar / max shot volume: 329 cm³ / max shot weight: 293 g / injection rate without accumulator: 254 cm³/s • Metering stroke: 207 mm / max nozzle stroke: 450 mm / nozzle immersion depth: 20 mm / nozzle contact force: 58 kN / number of heating zones: 4 / hopper capacity: 50 l / maximum injection speed: 160 mm/s • Clamping force: 2420 kN / maximum opening stroke: 550 mm / minimum mould height: 300 mm / maximum mould height: 580 mm / maximum platen distance: 1130 mm • Clamping platens (HxV): 880x830 mm / tie bar spacing (HxV): 610x560 mm / ejector stroke: 150 mm / ejector force: 58 kN • Dry cycle time according to Euromap 6 (stroke): 427 mm • Net weight without oil: 10,100 kg Klsdpfx Agsx D Hnys Rep Dimensions Machine depth: 6460 mm

Tahun pembuatan: 2019, Kondisi: siap digunakan (bekas), This DEMAG Systec 210/580-840 was manufactured in 2019. It is a hydraulic injection moulding machine with a clamping force of 210 tons and a power rating of 60 kW. The machine has operated for 31,132 hours. Consider the opportunity to purchase this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Contact us for further information. • The dosing unit (orange section) is not included. • Integrated socket combination, country-specific • Disconnectable via main switch and shutdown program • 2 x Schuko 1Ph/230V/16A; 2 x IECEE 3Ph/400V/16A residual current circuit breaker • Pneumatic 5/2 valve no. 1 on the moving mould mounting platen; • Programmable, supply via central air connection • Including hoses. Inputs and outputs are freely programmable; 3 inputs and 3 outputs; • Terminal outside of the control cabinet • Interface for additional nozzle heating band; socket only • 2-circuit core pull via directional control valve on moving platen; Q-independent (programmable); • With pilot-operated non-return valves to prevent core drift • Mould mounting dimensions E (similar to Euromap March 96) • With lateral ejector plate, locating diameter of fixed platen: 160 mm • Locating diameter of moving platen: • Increased mould installation height by 100.0 mm • Min: 340 mm • Max: 790 mm Klodpfox D Nlujx Ag Rep

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), en-GB Klodpjx D Rqrjfx Ag Rop

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, jam operasional: 8.000 h, gaya penjepit: 500 kN, diameter sekrup: 25 mm, berat injeksi: 46 g, tinggi total: 1.779 mm, berat keseluruhan: 4.200 kg, This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It is equipped with a fully electric direct drive system and the NC5+ control unit for enhanced energy efficiency and precise injection dynamics. The package includes a granulate dryer, industrial robot, conveyor belt, and temperature control units, making it ideal for high-quality injection molding processes. Please contact us for further information about this machine. Additional Equipment • Granulate dryer • Handling system • Conveyor belt – 1400 mm x 400 mm Klodpfx Agox D Eccj Rsp • Precision scale • Temperature units – 2x HB-Therm Machine Advantages Technical Machine Advantages • Exceptional energy efficiency • Increased platen rigidity and mold safety • Fully electric direct drive • Ultra-precise direct drive motors with a 0.1 ms response time • Displacement: 52 cm³ • Injection pressure: 2180 bar • Clamping plates: 520 x 570 mm Additional Information Control Unit Modern control system with NC5+ Automatic mold height and clamping force adjustment Energy-saving routines Dimensions Machine depth: 4308 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 17.577 h, gaya penjepit: 1.600 kN, tinggi total: 2.060 mm, This SUMITOMO SHI DEMAG IntElect 160/520-340 smart was manufactured in 2013. It is an all-electric injection moulding machine renowned for its precision and efficiency. If you are looking for a high-quality injection moulding machine, consider the SUMITOMO SHI DEMAG IntElect 160/520-340 smart available for sale. Please contact us for further information. Additional Equipment • Sepro Robot SDR 11 Machine Benefits Technical Machine Advantages • Clamping unit: 160 / Clamping force: 1,760 kN / Maximum opening stroke: 495 mm / Minimum mould installation height: 275 mm / Maximum mould installation height: 585 mm • Maximum distance between platen faces: 1,080 mm / Mounting platen size (H x V): 760 x 785 mm / Clear tie bar distance (H x V): 520 x 520 mm • Ejector stroke: 125 mm / Ejection force: 35 kN Kodpfx Aex D Hnmjg Rolp • Injection unit: 340 / Screw diameter: 35 mm / L:D ratio: 20 / Injection rate (PS) without accumulator: 288 cm³/s • Metering stroke: 162 mm / Maximum nozzle stroke: 350 mm / Nozzle immersion depth (SVO): 20 mm / Nozzle contact force: 30 kN • Material hopper capacity: 35 L / Max. injection speed, standard: 300 mm/s / Max. injection speed, enhanced: 500 mm/s • Net weight without oil fill: 7,300 kg Additional Information Electrical and Pneumatic Interfaces: Power Sockets: 2 x Schuko (1Ph, 230V, 10A) 2 x IECEE (3Ph, 400V, 16A) – disconnectable via main switch Additional Schuko socket also provided (same rating) Valves: 1 x pneumatic 5/2 valve on moving platen (programmable) 2 x pneumatic 5/2 valves on stationary platen (programmable) I/O: 3 digital inputs / 3 digital outputs (freely programmable) Terminal block outside control cabinet Air & Cooling: Centralised air supply and piping Cooling system: open circuit Cooling water controller: 4 circuits with temperature display (max. 10 l/min per circuit) Separate water supply connection for cooling (mould + machine) Deactivation of mould cooling (programmable by time) Mechanical Properties and Movement: Clamping and injection unit colours: Jet black (RAL9005): bed, pump unit, base cabinet Signal white (RAL9003): clamping unit, injection unit, safety guards, covers, safety doors Mould mounting platens: E-standard arrangement (similar to EUROMAP, March 1996) No lateral ejector plate Ejector: held in front position against spring-loaded ejector in mould Standard mould height Standard closing speed Motion only active with safety guard closed Screw: wear-resistant, nitrided barrel, standard L:D, 35 mm diameter Non-return valve: 3-piece, ring design Control, Programming and Monitoring: Inputs/outputs and interlock logic: freely programmable Switching programs (e.g., dry cycle, start-up scrap counter, timer-controlled cooling) Injection process: Max. injection force at max. injection speed: 200 mm/s Back pressure programmable via 6-step polygon Hold pressure switchover dependent on melt pressure Post-injection, back pressure, metering: closed-loop control Feed throat temperature control: closed-loop, max. 90°C ±9°C Reduced nozzle closure force (programmable) Clamping force: closed-loop control

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 91.810 h, gaya penjepit: 2.500 kN, diameter sekrup: 60 mm, berat injeksi: 579 g, en1 Kjdpfx Agsyfq Als Rslp

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1995, jam operasional: 122.158 h, gaya penjepit: 3.300 kN, diameter sekrup: 60 mm, This hydraulic injection moulding machine DEMAG ET 330 - 1450 was manufactured in 1995. It features a clamping force of 3300 kN and a screw diameter of 60 mm, providing robust performance for various applications. The machine is equipped with a Wittmann W322-121 linear robot to enhance automation. Take advantage of the opportunity to purchase this DEMAG ET 330 - 1450 hydraulic injection moulding machine. Contact us for further details. • Clamping Unit: • Clamping force: 3630 kN • Tie bar spacing (H x V): 710 x 630 mm • Platen dimensions (H x V): 1040 x 950 mm • Minimum/maximum mould height: 330 mm / 830 mm • Opening stroke: 675 mm • Daylight between platens: 1505 mm • Permissible mould weight: fixed side (DS) 1200 kg; moving side (AS) 2400 kg; total 3600 kg • Ejector: stroke 200 mm; force 80 kN; retraction force 35 kN • Core pull control: yes (2 units, on ejector side/AS) • Shut-off nozzle: yes (hydraulic/pneumatic 1/1) • Injection Unit 1: • Unit code: 1450-60 • Screw diameter: 60 mm • Injection pressure: 1905 bar • Shot volume: 763 cc • Shot weight (PS): 695 g • Screw L/D ratio: 20 • Nozzle radius: 15 mm Kedpfoyg Nkwjx Ag Rslp • Maximum dosing stroke: 270 mm • Plasticising rate: 41 g/s • Equipment/Controls: • Armoured (wear-resistant) injection unit: yes • Pneumatic ejector: yes • Process control: SPC (yes/yes) • Printer interface: integrated • Hot runner control: 0-zone (none) • Maintenance: • Hose replacement carried out in 2017 Additional equipment • Wittmann W322-121 CNC linear robot/extraction device (included in the scope of delivery) • Travel paths: Y-axis 1600 mm, X-axis 500 mm, Z-axis 2500 mm

Tahun pembuatan: 2019, jam operasional: 18.138 h, Kondisi: siap digunakan (bekas), berat keseluruhan: 25.340 kg, SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 ini diproduksi pada tahun 2019. Mesin injeksi listrik yang kokoh ini memiliki diameter ulir 50 mm, gaya penutupan 3.500 kN, dan jarak antara tiang 820 mm. Mesin ini telah mencatat 18.138 jam operasi dengan 12.875.090 siklus. Jika Anda mencari mesin injeksi berkualitas tinggi, pertimbangkan SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 yang kami tawarkan untuk dijual. Informasi tambahan: • Diameter ulir: 50 mm • Volume dosis maksimum: 530 cc • Jumlah siklus: 12.875.090 • Jarak antara tiang: 820 mm • Gaya penutupan: 3.500 kN Ksdpfxex D Nxzs Ag Relp

Kondisi: bekas, Tahun pembuatan: 2002, Opportunity to acquire a DEMAG injection moulding machine with 1000T clamping force and 140,000 operating hours. Can be inspected in operation by appointment. Availability: 06/2026 Important: The information on this page has been obtained to the best of our knowledge and belief. This information is provided in good faith, but its accuracy cannot be guaranteed. Accordingly, this information is non-binding and does not constitute a contractual condition. We recommend that you verify all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, we recommend organising a live video inspection in most cases. Clamping force: 1000 tons Opening stroke: 1250 mm Min. mould height: 500 mm Max. mould height: 1200 mm Tie bar spacing: 1400 × 1120 mm Platen size: 1950 × 1670 mm Screw diameter: 80–110 mm Injection volume: ± 2000–3800 cm³ Shot weight (PS): ± 1800–3400 g Kjdpfoyq Dqgex Ag Rjlp Injection pressure: up to ≈2380 bar Total weight: 72.5 tons (72,500 kg) Total length: 13,184 mm Total width: 3,175 mm Total height: 2,925 mm Max. pressure ({P_{max}}): 190 bar Max. flow rate ({Q_{max}}): 486 l/min System current: 409 A Heating current: 154 A

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1986, nomor mesin/kendaraan: MIKA-CN, Data teknis: 1x Demag KBK 1 Crane Swing Pilar NL 125KG dengan Demag DC Chain Hoist (125Kg - Tahun 2007) Kapasitas muatan pada jangkauan penuh: 125KG Tinggi: sekitar 3,05m Ketinggian bawah lengan: sekitar 2,55m Jangkauan: 3m Tinggi kait: sekitar 2,15m Berat total sekitar 300KG Kedpfxoyu E I Ij Ag Relp Dilengkapi dengan Demag DC Chain Hoist 125KG Incl. pin, drag chain kabel, troli, end cap, dll. Radius putar 300°, koneksi ke 400V 16A Crane telah dibongkar dan tersedia segera Lokasi barang di 75053 Gondelsheim Kran lain juga tersedia, kapasitas angkat 80-5000Kg, silakan tanyakan Lihat foto Pengiriman melalui ekspedisi atau pengambilan sendiri hanya berdasarkan perjanjian janji temu

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, DEMAG System 800/1120-9500 Injection Moulding Machine Basic Information Manufacturer: DEMAG Model: System 800/1120-9500 Year of Manufacture: 2008 Clamping Unit Clamping Force: 8,000 kN Tie Bar Distance (horizontal × vertical): 1120 × 1000 mm Platen Size (horizontal × vertical): 1620 × 1500 mm Minimum Mold Height: 500 mm Maximum Mold Height: 1050 mm Maximum Distance Between Platens: 2080 mm Maximum Mold Weight: 7,200 kg Opening Stroke: 1,030 mm Ejector Stroke: 350 mm Ejector Force: 139 kN Injection Unit Screw Diameter: 130 mm Shot Volume: 7,300 cm³ Shot Weight (PS): 6,640 g Maximum Injection Pressure: 1,300 bar Screw L/D Ratio: 20 L/D Klsdpfx Ageyugcto Rjp Electro-Hydraulic Equipment Pump Motor Rated Power: 110 kW Heater Power: 79 kW Hydraulic Oil Tank Capacity: 1,300 l Machine Dimensions and Weight Machine Dimensions (L × W × H): 12.3 × 2.7 × 2.7 m Machine Weight: 33,500 kg Control Cabinet Weight: 9,700 kg Optional ESS (Energy Saving System) The machine can be equipped with a modern ESS servo drive system that increases the energy efficiency of hydraulic injection moulding machines. The system controls the operation of the hydraulic pump motor via a frequency inverter, which adjusts the motor speed to the actual demand during the production cycle. As a result, electric power is consumed only when the machine requires it. Main Benefits - Reduction of electric energy consumption by up to 30% - Servo-driven hydraulic pump technology - World-class, proven technology used in plastics processing industry - Reduction of energy losses during idle operation - Lower heating of the hydraulic system - Extended service life of hydraulic components - Possibility of installation in existing hydraulic injection moulding machines The ESS system allows for significant reduction of operating costs while maintaining full production parameters.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, DEMAG System 1500/1500-16000 Injection Moulding Machine Basic Data Manufacturer: DEMAG Model: System 1500/1500-16000 Year of manufacture: 2008 Clamping Unit Clamping force: 15,000 kN Platen dimensions (horizontal × vertical): 2,150 × 1,880 mm Tie bar spacing (horizontal × vertical): 1,500 × 1,250 mm Minimum mould height: 700 mm Maximum mould height: 1,400 mm Maximum opening stroke: 2,900 mm Injection Unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Shot weight (PS): 9,880 g Maximum injection pressure: 1,454 bar Electrical and Hydraulic Equipment Rated pump motor power: 165 kW Heater power: 97 kW Machine Dimensions and Weight Net weight of machine: 74 t Weight of control cabinet: 21 t Total weight: approx. 95 t Dimensions (L × W × H): 14.4 × 3.4 × 2.9 m Service History / Repairs 2010 – new screw with RSP and barrel 2015 – new IBED 2015 – new wiring plate 2017 – new motor and pump no. 2 2017 – new injection cylinder piston rod (BS) with seals 2017 – replacement of oil cooler circulation pump 2017 – replacement of TeachBox (robot) 2018 – replacement of pumps P1 + P3 (at 65,800 h) 2018 – hydraulic oil change Optional Energy Saving System ESS (Energy Saving Systems) Klodpfx Ajyugaljg Rsp The machine can be equipped with a modern ESS servo drive system, which significantly improves the energy efficiency of hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor by using a frequency converter, adjusting the motor’s rotational speed according to the machine’s actual requirements during the production cycle. As a result, electrical energy is consumed only when it is truly needed. Key Benefits - Reduction in electrical energy consumption by up to 30% - Servo drive technology for the hydraulic pump - World-class, proven technology used in the plastics processing industry - Reduction of energy losses during machine idle times - Lower heating of the hydraulic system - Extended service life of the motor and hydraulic components - Possible retrofitting to existing hydraulic injection moulding machines The ESS system allows for significant reduction of operating costs while maintaining full production parameters.

Kondisi: baru, DEMAG kotak kontrol / kotak saklar untuk alat angkat / kerekan kabel - DR / DMR / DH 1. Demag kotak kontrol DR / DMR dengan inverter frekuensi DIC - 4 - 007 - C - 0032 - 05 2. Demag kotak kontrol / kotak saklar untuk alat angkat DH Kjdpfx Aeyut Aaeg Rolp

Kondisi: bekas, Tahun pembuatan: 2005, Demag System 200/500 This DEMAG injection moulding machine System 200/500-440 from 2005 is being auctioned in our industrial online auction "Injection Moulding Machines - DEMAG System, KraussMaffei, Sumitomo" in Babenhausen until 10.03. The auction is conducted on our RESTLOS online platform. Further machine details: Complete injection moulding system with robotic automation, consisting of Demag injection moulding machine, Yaskawa 6-axis robot, laser marking system, screen printing station, conveyor technology, and temperature control units. Technical Data Injection Moulding Machine Manufacturer: Demag Ergotech Model: System 200/500-440 Year of manufacture: 2005 Clamping force: 2000 kN (200 t) Injection unit: 440 Control system: Ergocontrol C-Dias Connection: 3 × 400 V / 50 Hz Machine weight: approx. 7.7 t Ksdpfxjynzx No Ag Rjlp Operating hours cannot be read out (counter unit was not powered) Industrial Robot Manufacturer: Yaskawa Motoman Model: MH6 Year: 2010 Payload: 6 kg Controller: DX100 Laser Marking System Manufacturer: Robot Technology GmbH Model: FLACS.MARK 30W Year: 2018 Scope of supply - Demag injection moulding machine - Yaskawa Motoman MH6 robot with controller - Robot safety cell - Laser marking system - Screen printing station - Conveyor belt / parts handling system - 2 temperature control units - Stäubli quick-change system QMC 121 - Kistler mold pressure measuring system - Industrial vacuum cleaner Notes - Please arrange a viewing appointment - Delivery without tooling, materials, or decorations unless explicitly stated otherwise - Dismantling and loading to be carried out by the buyer - As shown in the photos, function not tested - Excludes any other items shown in images - Completeness not verified.

Kondisi: siap digunakan (bekas), kapasitas angkut: 32.000 kg, berat kosong: 38.000 kg, tinggi angkat: 12.200 mm, Demag DH hoist with digital scale Width: 6008 mm Main girder height: 1500 mm Klodev Sfrwopfx Ag Rop Hoist height above girder: 1210 mm Type: overhead travelling crane Span: 25 meters Hoisting speed: 6.3 / 12.6 m/min Cross travel speed: 10 / 34 m/min Long travel speed: 10 / 100 m/min Number of trolleys: double girder

Kondisi: bekas, Tahun pembuatan: 2005, gaya penjepit: 110 kN, volume langkah: 2.926 cm³, tekanan injeksi: 1.600 batang, berat keseluruhan: 5.650 kg, diameter konveyor sekrup: 45 mm, Dasar Pengiriman: ex lokasi Waktu Pengiriman: sesuai kesepakatan Syarat Pembayaran: 100% sebelum pengambilan mesin, bersih tanpa potongan Kljdpfx Ajymqz Dsg Rep

Kondisi: bekas, Tahun pembuatan: 2005, gaya penjepit: 110 kN, volume langkah: 398 cm³, tekanan injeksi: 1.550 batang, berat keseluruhan: 5.700 kg, diameter konveyor sekrup: 50 mm, Dasar Pengiriman: ex lokasi Waktu Pengiriman: sesuai kesepakatan Syarat Pembayaran: 100% sebelum pengambilan mesin, bersih tanpa potongan Klsdoymqzqjpfx Ag Rep

Kondisi: bekas, Tahun pembuatan: 2005, gaya penjepit: 110 kN, volume langkah: 398 cm³, tekanan injeksi: 1.550 batang, berat keseluruhan: 5.700 kg, diameter konveyor sekrup: 50 mm, Dasar Pengiriman: ex lokasi Waktu Pengiriman: sesuai kesepakatan Syarat Pembayaran: 100% sebelum pengambilan mesin, bersih tanpa potongan Kedoymqzkspfx Ag Relp

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, suku cadang kerekan crane untuk hoist tipe DH500 / DH1000 Kedpfxev Uu T Ns Ag Rolp Motor hoist KBH140 B4 Motor hoist KBH140 B2/12 Motor hoist KBH160 B4 Motor hoist KBH200 B4 untuk hoist tipe P-Zug Motor hoist 24/10 K4P Motor hoist 24/14 K4P Motor hoist 28/12 K4P Motor hoist 36/20 K6P Motor hoist 36/24 K6P Pengerak halus FG08 FG10 Drum tali, selubung, pemandu tali Info: kami memiliki lebih dari 20.000 suku cadang DEMAG di gudang! Lihat juga penawaran saya yang lain dari stok gudang!

Kondisi: bekas, Tahun pembuatan: 2004, gaya penjepit: 200 kN, volume langkah: 763 cm³, tekanan injeksi: 1.905 batang, berat keseluruhan: 10.600 kg, diameter konveyor sekrup: 60 mm, Dasar Pengiriman: ex lokasi Kedsylz Apjpfx Ag Rslp Waktu Pengiriman: sesuai kesepakatan Syarat Pembayaran: 100% sebelum pengambilan mesin, bersih tanpa potongan

Kondisi: bekas, Tahun pembuatan: 2003, gaya penjepit: 150 kN, volume langkah: 399 cm³, tekanan injeksi: 1.598 batang, berat keseluruhan: 7.500 kg, diameter konveyor sekrup: 50 mm, Dasar Pengiriman: ex lokasi Kjdpfx Asylz Aijg Rjlp Waktu Pengiriman: sesuai kesepakatan Syarat Pembayaran: 100% sebelum pengambilan mesin, bersih tanpa potongan

Kondisi: baik (bekas), Tahun pembuatan: 2005, Ref.-No.: 18565 Produsen: DEMAG Tipe: 150-610. Sistem NC4 Tahun pembuatan: 2005 Unit Penutup Gaya penjepit: 150 ton Klsdoxhfuaepfx Ag Rop Jarak bukaan: 500 mm Ukuran kolom (h x v): 500 x 500 mm Tinggi pemasangan min.: 250 mm Lebar bukaan: 750 mm Ukuran pelat (h x v): 750 x 750 mm Unit Injeksi Diameter sekrup: 45 mm Volume injeksi: 323 cm³ Berat injeksi PS: 290 gr Tekanan injeksi: 1973 bar Dimensi dan Berat Dimensi PxLxT: 5,45 x 1,63 x 2,1 m Berat mesin: 7500 Kg Robot Merek: Wittmann Tipe: W721-0231 Tahun pembuatan: 2005