Beli Eisele Vms Ii bekas (98)

Tahun pembuatan: 1979, Kondisi: baik (bekas), nomor mesin/kendaraan: 2001, Saw blade diameter: 400 mm Cutting capacity at 90° round: 95 x 240 mm Cutting capacity at miter 45° round: 75 x 180 mm Saw blade speed: 10.5 / 21 rpm Drive motor: 380 V, 2.6/3.2 kW Space required: 1500 x 1100 x 2150 mm Kedpfx Aefnrw Sja Njdg Weight: 630 kg

Tahun pembuatan: 1991, Kondisi: baik (bekas), nomor mesin/kendaraan: 900 1241, Saw blade diameter: 275 mm Cutting capacity at 90° round: 90 mm Cutting capacity at 90° rectangular: 75 x 75 mm Cutting capacity at 45° mitre, rectangular: 75 x 75 mm Kdjdpfom Twgwsx Aa Neg Saw blade speed: 40/80 rpm Drive motor: 380 V, 1/1.2 kW Space requirement: 700 x 600 x 1580 mm Weight: approx. 180 kg

Tahun pembuatan: 1970, Kondisi: baik (bekas), nomor mesin/kendaraan: 1258, Saw blade diameter: 315 mm Cutting range at 90° round: 90 mm Kdjdpfsh I Dvnex Aa Njg Cutting range at 90° square: 80 x 80 mm Cutting speeds: 12.5 - 25 m/min Feed rates: hydropneumatically steplessly adjustable Cut length: 5 - 1580 mm Saw drive: 380 V, 1.8/2.5 kW Space requirement: 2300 x 1000 x 2800 mm Weight: 940 kg

Tahun pembuatan: 1997, Kondisi: sangat baik (bekas), A used, very well-maintained cold circular saw from EISELE, equipped with a 370 mm circular saw blade, infinitely variable hydro-pneumatic feed, pneumatic material clamping, coolant system, and documentation. Speed: 17/34 rpm Cutting capacity: Round 90°/45° right, left/30° right: 130/130/105 mm Square 90°/45° right, left/30° right: 120x120/100x100/90x90 mm Rectangular 90°/45° right, left/30° right: 200x100/140x100/100x100 mm Pneumatic connection: 7 bar Working height: 900 mm Machine dimensions (W x D x H): 865 x 1332 x 2175 mm Kdsdpfjkfp D Tox Aa Njg Weight: 460 kg For further technical data, see PDF document. Technical data and dimensions: Subject to change/errors excepted.

Kondisi: bekas, Tahun pembuatan: 1981, Speed: 40/80 rpm Machine No.: 0025 Voltage: 380 V Clamping: yes kW Mitre: yes Weight: 700 kg Kedpfxevu Hlks Aa Nodg

Tahun pembuatan: 1979, Kondisi: bekas, Saw blade diameter 450/500 mm Cutting diameter mm Stroke mm Total power requirement 3.6 kW Kodpeilfp Njfx Aa Nodg Machine weight approx. 1130 kg Space requirement approx. m - Circular saw, semi-automatic - Hydraulic

Kondisi: bekas, Tahun pembuatan: 2014, PRESSTA 2000 – Mesin Pengimpal Sudut Spesifikasi Teknis Utama (Pressta 2000) Kedox R R Tiopfx Aa Njdg Produsen: Pressta-Eisele Tipe: Mesin Pengimpal Sudut (model PV 8 kadang disebutkan) Operasi: Hidro-pneumatik Dimensi (L×T×D): 900 × 1.180 × 750 mm Berat: ~360 kg Tekanan Operasi: 8 bar Konsumsi Udara: 40 l/langkah pada 8 bar Gaya Tekan: 32 kN pada 8 bar Langkah Tekan: 17 mm Langkah Kembali: 140 mm Tinggi Tekan Maks.: 150 mm Tinggi Profil Maks.: 210 mm Koneksi Udara: R ¼''

Kondisi: bekas, Tahun pembuatan: 2014, nomor mesin/kendaraan: 0101-250007, Behringer Eisele HCS 160 MF Geradschnitt Vollautomat - gergaji lingkaran logam otomatis penuh adalah mesin berkualitas tinggi dan tangguh yang dirancang khusus untuk penggunaan profesional serta performa pemotongan logam tertinggi, juga disesuaikan untuk operasi multi-shift. Mesin ini menawarkan kombinasi unggulan antara kinerja, presisi, dan fleksibilitas, sehingga sangat ideal untuk produksi seri besar. Gergaji otomatis ini dilengkapi dengan sistem pemuatan dan pembongkaran material yang lengkap. Di sisi masuk terdapat majalah pemuatan, sedangkan di sisi keluar, potongan pendek dapat dikeluarkan melalui perangkat pemindah pada tiga posisi ke wadah yang disediakan dari konveyor. Ksdpfx Aasxl R Nko Nedg

Tahun pembuatan: 2004, Kondisi: bekas, en-GB: Technical Details: Saw blade diameter: 450 mm Cutting diameter: 150 mm Saw blade bore: 50 mm Saw blade diameter: 400 - 450 mm Saw blade speeds: 6 / 12 / 24 / 45 rpm Cutting range at 90 degrees, square: 140 x 140 mm Cutting range at 90 degrees, round: 150 mm Cutting range at 90 degrees, flat: 400 x 30 / 345 x 70 / 300 x 95 mm Table size: Ø 700 mm Rotating table: 360 degrees Clamping pressure: 30 bar Electrical specification – voltage/frequency: 400 / 50 V/Hz Total power requirement: 3.6 kW Machine weight approx.: 1,600 kg Machine dimensions: 1.5 x 1.0 x 2.35 m CIRCULAR SAW SEMI-AUTOMATIC – PROFILE CIRCULAR SAW MACHINE – UNDERFLOOR SAW For cutting materials: solid steel, tubes, and profiles within the specified cutting range. Cutting speed is adjusted according to the material/workpiece to be cut. Circular saw with hydraulic material clamping (adjustable clamping pressure) Mitre adjustment +30° to -90° Fitted with electro-hydraulic control Hydraulic pump: 2.2 kW; 23 l/min Coolant system integrated in machine base Piece counter Kdjdpfsu Nit Rex Aa Nog

Kondisi: bekas, Mitre saw, aluminium circular saw, semi-automatic aluminium circular saw, crosscut saw, glazing bead saw Kodpfec Ir Dvsx Aa Nsdg - Suitable for processing: flat, angle and solid materials, pipes, and special profiles - Saw blade: Ø 400 mm - Saw blade: tiltable - Motor power: 2.5 kW - Speed: 2800 rpm - Pneumatic material clamping - Pneumatic feed - With chip extraction system - Dimensions: 1100/900/H1160 mm - Weight: 238 kg

Kondisi: baik (bekas), Tahun pembuatan: 1993, Mitre saw, saw unit right/left, double mitre saw, crosscut and mitre saw, double-end profiler Kdjdpfstxkprex Aa Nog -Manufacturer: Emmegi, Pressta Eisele, Double Mitre Saw Type SINGLE 2 HM500 -Cutting length: 250 to 5000 mm -Saw units: swiveling 45° -Saw blade: Ø 500 mm -Cutting data 90°: Cutting height 350 mm, cutting width 160 mm -Cutting data 45°: Cutting height 260 mm, cutting width 125 mm -Dimensions: 5750/1220/H1700 mm -Weight: 1200 kg

Kondisi: bekas, Tahun pembuatan: 1994, fi Kdjdju Nigkepfx Aa Nsg

Tahun pembuatan: 2011, Kondisi: bekas, en-001 Kedpou Niuhsfx Aa Nedg

Kondisi: bekas, en-GB-1 Ksdpfxou Niuzs Aa Nedg

Kondisi: baik (bekas), Commissioning trolley, rack trolley, paint drying trolley, compartment transport trolley, transport trolley, window profile trolley - Quantity: 1 commissioning trolley available - Total length: 1,750 mm - Total depth: 1,020 mm - Total height: 1,670 mm - Lower support: 720 mm - Support height: 1,400 mm Kdsdsb Hw Dbjpfx Aa Nsg - Weight: 62 kg

Tahun pembuatan: 1999, Kondisi: bekas, Saw blade diameter, vertical and horizontal: 500 mm Max. profile height: 280 mm Kdodsvmz R Sopfx Aa Njg Max. notch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Swiveling material stop with locking points and digital display Notch height motorized adjustable with digital readout Motorized adjustment of angles with digital display Hydropneumatic material feed via two-hand operation Pneumatic material clamps Coolant lubrication

Kondisi: baru, Cocok untuk berbagai bidang aplikasi, khususnya juga untuk industri fotovoltaik dan otomotif. Kami menawarkan mesin gergaji bundar otomatis penuh dan pusat pemotongan lengkap dari seri "Profilma", "KS", dan "SW" dengan diameter mata gergaji hingga 650 mm. Majalah pengisi dan sistem pemuatan/keluaran disesuaikan dengan kebutuhan Anda. Unit ekstraksi yang kuat dengan separator kabut minyak melengkapi kemudahan penggunaan. Kdodpfx Aajx E U Dne Nog Hubungi kami—bersama-sama kita akan menemukan solusi optimal untuk produksi Anda!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Complete saw line consisting of infeed unit, fully automatic circular saw, and outfeed unit Suitable for a wide range of applications, particularly in the photovoltaic and automotive industries. Infeed unit: Horizontal loading magazine Model HLM 4-strand timing belt conveyor 6 compartments, each 285 mm wide, for holding profiles Max. material height corresponds to the saw cutting range, round stock max. diameter 130 mm 3 sliding strips between the belts for additional support Profile length: min. 2,700 mm, max. 6,500 mm Saw: Fully automatic circular saw Pressta-Eisele Model PROFILMA 510 E-SA Saw blade diameter max. 500 mm Continuously variable speed control Hydro-pneumatic saw blade feed, infinitely adjustable, from rear to front Siemens S7-300 control with touchscreen Reversal device with 5-fold stroke, up to max. 5,000 mm Electronic material feed 3–1,000 mm (single stroke) Cutting gap extension on both sides Pneumatic removal slide Waste flap after the saw for cut-offs / remnants Cut length depending on profile, from 8 mm Menzel minimum quantity lubrication Clamping pressure regulation 2 extraction nozzles for dust extraction Outfeed: Support table area 1,500 mm x 2,500 mm Kjdsxvbvvjpfx Aa Nsdg Pneumatic cross transfer slide

Kondisi: baru, Untuk pemrosesan semua sistem profil jendela aluminium umum seperti Schüco, Hueck, Heroal, Reynolds, dll. Dapat digunakan secara universal dengan badan punch yang dapat disetel ganda. Untuk sudut siku dengan ukuran slot 25–60 mm dan offset ruang profil 0–40 mm. Pengatur tinggi sensor, pisau punch, dan sisipan penahan dapat diatur tanpa tingkat. Sensor dan badan punch dilengkapi skala. Penahan dapat ditarik masuk untuk memudahkan pemasangan profil, dan dapat menyesuaikan sendiri saat bergerak mendekati profil. Penguncian penahan secara hidraulis. Proses penekanan pneumatik melalui sistem tuas, menjamin proses punching yang sinkron. 2 silinder penekan pneumatik untuk menjepit profil. 2 cam eksentrik untuk posisi rangka. 2 lengan penyangga profil yang dapat diputar. Pengoperasian melalui 2 pedal kaki. Termasuk alat standar. Kdodpfx Aashmfyhe Nog

Kondisi: baru, Pemotongan dan penekukan (stamping) atau pengeboran sepenuhnya otomatis dalam satu mesin! Untuk berbagai macam aplikasi, terutama untuk industri fotovoltaik dan otomotif! Untuk penggunaan dengan mata gergaji Ø 500 atau 550 mm, dilengkapi perangkat pembalik hingga panjang potongan maksimum 4000 mm Otomat Gergaji dan Stempel Profilma 502 ST-V • untuk profil aluminium dan plastik • untuk pemotongan panjang dan penekukan berdasarkan model Profilma 502 • pengoperasian sepenuhnya otomatis dan Otomat Gergaji dan Bor Profilma 502 BG Kodpfex Haftox Aa Nedg • untuk profil aluminium dan plastik • pemotongan, pengeboran, dan tapping hingga 4 profil secara bersamaan • pengoperasian sepenuhnya otomatis

Kondisi: baik (bekas), Tahun pembuatan: 1989, Fungsionalitas: fungsi terbatas, nomor mesin/kendaraan: 8138, jenis arus masuk: tiga fasa, tegangan masuk: 400 V, pressta-eisele-akf-notch-milling-machine-excellent-condition-ful ly-operational-uvv-tested-for-sale-is-a-robust-pressta-eisele-akf -notch-milling-machine-from-metal-fenestration-manufacturing-the- machine-is-in-overall-very-good-well-maintained-and-fully-operati onal-condition-and-was-in-use-until-recently-a-valid-uvv-safety-i nspection-is-present-see-sticker-photos-important-note-the-pneuma tic-hoses-on-this-machine-show-age-related-material-fatigue-recom mendation-replacement-of-the-pneumatic-hoses-before-commissioning -minimal-effort-inspection-and-functional-test-on-site-possible-a t-any-time-machine-manufacturer-pressta-eisele-type-akf-machine-n o-8138-year-of-manufacture-1989-made-in-west-germany-application- area-notching-of-profiles-in-metal-and-window-construction-featur es-equipment-heavy-vibration-damped-machine-body-powerful-motor-p neumatic-feed-clamping-functions-sturdy-work-table-with-clamping- options-safety-guards-included-foot-pedal-operation-maintenance-f riendly-design-condition-mechanics-and-electrics-fully-operationa l-well-maintained-overall-condition-note-pneumatic-hoses-age-rela ted-need-replacement-see-above-dimensions-external-dimensions-app rox-h-137-cm-x-w-99-cm-x-d-97-cm-additional-information-sale-on-b ehalf-of-customer-invoice-with-vat-possible-location-72229-rohrdo rf-loading-by-overhead-crane-on-site-possible-delivery-may-be-arr anged-at-cost-price-net-price-1-700-eur-vat-negotiable-if-interes ted-please-get-in-touch-inspection-and-test-run-possible-by-appoi ntment-i-am-offering-more-machinery-and-accessories-for-window-me tal-and-workshop-operations-in-my-other-listings-check-my-other-o ffers-it-s-worth-it Kdodpfxex Rpfqe Aa Njg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Overhauled: 2024 Year of manufacture: 1994-2000 Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Speed: 1500/3000 rpm Cutting speed: 2100 – 4200 m/min Electronic saw height adjustment Working area, square max.: 170x170 mm Working area, flat max.: 300x150 mm Working area, round max.: 200 mm Saw feed: 0 – 40 mm/s, stepless adjustment Cut length: 5-950 mm (9999 mm with multiple stroke) Feed speed max.: 500 mm/s Weight approx. 1,900 kg Dimensions LxWxH: 2200 mm x 2700 mm x 1950 mm After a comprehensive retrofit, the machine is in like-new condition both technically and visually. Thanks to its features and robust design, it is highly efficient and suitable for a wide range of applications. The programmed HMI control enables easy and highly profitable operation. The soundproof enclosure minimizes noise emissions. The machine is completely overhauled in our facility according to customer requirements. The overhaul includes, among others, the following upgrades: - Conversion to Siemens S7 PLC Kjdpfx Ajuiy Hroa Nsdg - Upgrade to Siemens HMI operator interface - Replacement of the ball screw - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components - Overhaul or replacement of all pneumatic cylinders - Renewal of the valve island - Optimization of extraction performance - Overhaul of minimum quantity lubrication system - Replacement of wear parts - Refurbishment of the enclosure Additional features: - Soundproof enclosure - Kerf extension (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Warranty: Unless otherwise agreed, we provide a 6-month warranty on all overhauled or replaced parts. Labor and wear parts are excluded from the warranty. Options: - Multiple clamping device for parallel sawing of several workpieces - Flat magazine for automatic loading of material up to 6 m in length - Roller conveyors for raw material - Reinforced motor 18.0 kW (frequency controlled) - Delivery and installation at your site - Training for your personnel

Tahun pembuatan: 1997, Kondisi: bekas, Saw blade diameter, vertical and horizontal: 500 mm Max. profile height: 280 mm Max. notch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Swiveling material stop with locking points and digital display Notch height motorized adjustable with digital readout Motorized adjustment of angles with digital display Hydropneumatic material feed via two-hand operation Pneumatic material clamps Kdsdpfx Aox Ecg Usa Nog Coolant lubrication

Kondisi: bekas, max-stanzkraft-100-kn Kodpfexrmz Asx Aa Nedg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1015, Profile dimensions (HxW) up to 100x195 mm, 80x200 mm Automatic working cycle Drive via a 3 kW/400 V motor, 2850 rpm Saw blade: d=450x3.8x40 mm, z=110 Horizontal and vertical material clamping on the infeed side Dosing spray installation Horizontal material clamping in the feed device Retraction of both clamping jaws during return stroke (prevents profile scratching) Steplessly adjustable hydropneumatic feed for the saw blade Saw blade advances from the rear Length of cut sections adjustable within 0-300 mm (with reversing device 0-600 mm) Cutting length adjustment via handwheel with mechanical counter Maximum width of profile to be cut: 200 mm Cutting range (height x width): 100x195 mm, 80x200 mm Automatic shutdown when material is depleted Option to connect an extraction unit Kjdpfewgmv Ssx Aa Nodg