Beli Harz Kompresor Pabrik bekas (3.457)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, daya: 7,5 kW (10,20 hp), tekanan (min.): 6 batang, tekanan (maks.): 15 batang, tingkat kebisingan: 62 dB, Kapasitas tangki udara terkompresi: 270 l, The machine has already been professionally disassembled and placed into storage. TECHNICAL DETAILS Operating overpressure: 15 bar Delivery rate (at 15 bar): 400 - 790 l/min Delivery rate (at 13 bar): 430 - 860 l/min Delivery rate (at 10 bar): 330 - 1,090 l/min Delivery rate (at 8 bar): 330 - 1,240 l/min Delivery rate (at 6 bar): 330 - 1,370 l/min Volume flow: 90 m³/h Air connection: 1/2" inch MACHINE DETAILS Compressed air receiver: 270 l / 11 bar, vertical, galvanized Residual oil content at 20°C max.: 0.01 mg/m³ Differential pressure, wet/saturated: 110 mbar Drive motor rated power: 7.5 kW Operating voltage / Frequency: 400 ~3 / 50 V/Hz Sound level: 62 dB(A) Dimensions & Weight Dimensions (L x W x H): 1,079 x 553 x 1,014 mm Machine weight: 273 kg EQUIPMENT - Refrigeration dryer - Frequency control Gjdezb Idrepfx Agroiu - Pre-filter mesh - Electronic control RENNERtronic Touch - Level-controlled condensate drain KN5 230VAC shortened version - Schneider mounting kit ABZ-Eco 3100 Uni condensate drain Ecomat - Schneider condensate collection pipe, 3 connections - Pre-filter LPPN 73 FF5 - Particle filtration 5 micron - Sub-microfilter LPPN 73 SMA - Particle filtration 0.01 micron - Wall bracket including connection set for 2 filters LPP 23 - LPP73 - 2x connection hoses VSL 1/2"-1300 mm - Oil-water separator KON-P 5 Note: Accessories are provided without warranty. The item is sold “as seen.” The prospective buyer must verify the completeness of the equipment on site.

Tahun pembuatan: 2023, Kondisi: bekas, de-en-001 Gisdevxxvijpfx Agreu

Tahun pembuatan: 2018, Kondisi: bekas, Jenis kompresor: Kompresor sekrup Tekanan: 10 bar Aliran volume: 1080 l/menit Gsdpfx Agex Hwq Hjrsiu Pembuangan kondensat: otomatis Berat sekitar: 240 kg Daya motor: 7,5 kW Koneksi listrik sekitar: 400 V Lokasi penyimpanan: pada pelanggan

Tahun pembuatan: 2026, Kondisi: bekas, New display machine! Stationary piston compressor with refrigerated dryer, condensate drain, oil-water separator, and pre-/fine filter. The universal model with belt drive and high-quality components. Especially suitable for craftsmen. These compressors are used where compressed air quality, durability, and efficiency are essential. Long service life thanks to 2-stage high-performance units with low speed, specially machined cast cylinders for minimal oil consumption and long service life, high-performance valves, optimal cooling through large fan wheel, motor with overload protection, easy condensate drainage via a standard 1/2" ball valve, equipped as standard with Condor pressure switch and pressure gauge, mounted as standard on a safety pallet with vibration dampers. Technical data: - Intake capacity: 650 l/min - Effective delivery: 520 l/min - Maximum pressure: 10 bar Godpfjyw Thvsx Agroiu - Tank capacity: 270 l - Cylinders/stages: 2/2 - Speed: 920 min-1 - Motor power: 4 kW / 400 V - Weight: approx. 197 kg Storage location: Rieth

Kondisi: bekas, PLANTA DE ZINC PARA TUBOS, fabricada por VOEST ALPINE / LOECO Capacidad máxima: 60.000 t/año (16 t/h) Dimensiones producibles: ¼” a 4” Longitudes producibles: 4 a 7 m Capa de Zn: 400 g/m2 según DIN 2444 Gijdpjyman Hsfx Agrou

Kondisi: bekas, Tahun pembuatan: 2000, Lokasi gudang: Nattheim Gedpfx Agevwdmworeiu

Tahun pembuatan: 2026, Kondisi: baru, We also offer leasing and financing options. Feel free to ask us! ‼️ATTENTION‼️ Currently, machines from China are being offered on various platforms. Most CE certificates are counterfeit. No EU conformity. Electrically, these machines are also not compliant in Germany. Several customers have contacted us, asking how to extract copper from such machines, as they only got shredded cable mix material. Since we ourselves tested these machines two years ago, we can confirm their experience: you do not get pure copper from them. These machines are not permitted for operation in Germany! Buy from us and take advantage of our expertise—see for yourself on-site in Heilbronn. We are your long-term partner and will always help you efficiently separate high-quality copper. Your Josan & Söhne Team! German quality, CE certified with EU conformity and available for live demonstration—not just edited or cut videos. We recommend buying locally in Germany. German warranties, German legal security, fixed prices, and later on German-language support in case of issues. You receive all these benefits exclusively when purchasing our machines. You are welcome to assess our quality on-site by appointment. Please note, videos can be edited. Live demonstrations available at our location‼️ For all recycling needs, we have shredders and other recycling machines in stock in Heilbronn! From copper recycling to plastic recycling, you can find all relevant equipment with us. Do not hesitate to contact us. ‼️CAN BE VIEWED ONSITE‼️ Our small system works just as perfectly as our large ones, only smaller and more affordable. Top-quality copper granulate. Fits in any garage. Approx. 20-30 kg input per hour. From stranded wire, extension cords, automotive cables, telephone cables, NYM cables—you can recycle everything with our machines! Josan Cable Granulator E30 We are happy to demonstrate this machine live for you in Heilbronn! By appointment only. We are based in Heilbronn, German company, under German law, with warranty and service! We also speak English! ‼️Please contact us for further questions! We can only respond if you provide your name, address, email, and telephone number. Otherwise, your request may get sorted as spam. We will respond and advise you in advance!‼️ Here is our entry-level model: ➡️With 380 V ➡️For cable diameters approx. 0.1–30 mm ➡️Power approx. 4.2kW ➡️Input approx. 20–30 kg/h ➡️Weight approx. 310 kg ➡️Dimensions approx. 88×74×173 cm ➡️With UVV (accident prevention regulations) carried out by a German company With this, you can process cables into copper. We also offer larger systems and accessories such as hydraulic cable cutters, electric motor breakers, triple separators, etc.—EVERYTHING related to cable recycling. Gijdpfx Aop E Efyjgreu When you purchase from us, you also buy our service! This is particularly important for such machines! IMPORTANT: Our service is only valid for machines and accessories purchased from us. With our know-how and machines, you will truly obtain copper granulate, not unseparated material. Net price €8,999.00 +19% VAT €1,709.81 Gross price €10,708.81 CE-certified machines from us. Subject to errors. Images/prices/equipment may vary.

Tahun pembuatan: 2026, Kondisi: baru, ‼️NEW FEATURE – NOW WITH SIEMENS TOUCH SCREEN‼️ For improved operation and control! Leasing is also available! With us, you get a linear payment plan with no large final installment! Term 36 months, rate factor: 3.0694% Term 48 months, rate factor: 2.3697% Term 60 months, rate factor: 1.9456% ATTENTION‼️ Currently, some machines offered on the portals are coming from China. Most CE certificates are counterfeit. There is no EU conformity. The electrical setup is also not compliant for use in Germany. Several customers have contacted us to ask why these machines do not deliver copper as expected; instead, they only produce shredded cable mix. As we have personally tested these machines ourselves two years ago, we can confirm that customers are correct: there is no pure copper output. These machines must not be operated in Germany! German quality, CE certified, EU-conform and available for live demonstration. We strongly recommend buying locally here in Germany. You benefit from German warranty, compliance with German laws, fixed prices, and future German-language support in case of any issues. These benefits apply exclusively to our machines. You are welcome to schedule an on-site appointment to experience our quality for yourself. Live demonstration available‼️ We have shredders and various other recycling machines in stock in Heilbronn for all types of recycling! Here is our new, unique machine – only available from us in Heilbronn. Water-cooled, exceptionally efficient, and produces ultra-clean copper granulate (99.7%). We are a German company operating under German law, offering high-quality equipment with warranty and service. Our qualified, German-speaking technicians are available to assist you if needed. We operate our own trucks and service vehicles, offering prompt support and expert advice. You are welcome to see everything for yourself on-site—not just rely on pictures and videos. We process granulation ourselves and can show you the result in a live demonstration. S300 with water cooling and fan, developed and assembled in Germany at our facilities. With our systems, you can also separate copper radiators. Input: ➡️ Copper-aluminum radiators Giedpfop E Efcex Agrju Output: ➡️ Copper and separate aluminum. Iron parts and screws are sorted as a separate fraction via a magnetic belt. (Pre-shredder required) As we also use our machines for copper recycling, we continually modernize them to maximize service life and keep them at the cutting edge. Maintenance, spare parts, modifications, and upgrades performed by our qualified staff. From stranded cables to extension cords, automotive cables, telephone cables, NYM cables – recycle it all with our machines! Granulation Plant S300 ➡️For cables from 0.1–40 mm ➡️ up to approx. 250 kg/h input, which means with a 50% copper content, you obtain 5 kg of 99.7% pure copper granulate from 10 kg of cable, which can be sold at the highest price. ➡️ Total connected load: 24 kW ➡️ Incl. separation tables ➡️ 380 Volt connection ➡️ UVV certification by a German company ➡️ Incl. conveyor belts ➡️ Incl. magnetic belt (for steel separation) ➡️ Transport can be organized from €24,999.00 net +19% VAT €4,748.81 Total gross: €29,748.81 Errors and omissions excepted.

Kondisi: bekas, Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: BL 750-90, mobilitas: bergerak, Dijual kompresor bergerak merek Babatz Godpfoy Nyrrjx Agroiu

Kondisi: baik (bekas), Tahun pembuatan: 2005, jam operasional: 50.000 h, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 850 kg, Perlengkapan: pengering pendingin, da1 Gisdpfx Agezb Drxorju

Kondisi: baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 700 kg, Mark skruvkompressor 30 kW är demonterad och klar för leverans. Gsdezb Dq Ijpfx Agroiu

Tahun pembuatan: 1978, Kondisi: siap digunakan (bekas), 569e8fc6 Godpfjzb Nktjx Agroiu

Tahun pembuatan: 1986, Kondisi: siap digunakan (bekas), d31d7c0d-a7ec-4e24-8c65-9c7ee2f77594 Gjdpozb Nldefx Agreiu

Kondisi: bekas, Tahun pembuatan: 2004, en-001 Giodpfou Szlusx Agreu

Tahun pembuatan: 2001, Kondisi: bekas, en-GB: Technical Details: Load capacity: 0.15 t Span: approx. 1200 mm Jib outreach: max. 1200 mm Lifting height: 2400 mm Lifting speed: manually controlled Machine weight approx.: 0.42 t Dimensions (L x W x H): 2.2 x 0.75 x 1.65 m Engine Hoist / Engine Crane Giedpsu Nvixsfx Agrou Welded section steel construction Lifting movement via lifting beam, pneumatic vertical travel (pneumatic pressure cylinder) operated by hand control Load hook type SIKA 1, with rope safety latch Mobile, braked when tiller is in vertical position, double wheel swivels 90° to the right/left, two fixed front wheels Accessories: 2x various lifting slings and 1x chain approx. 950 mm in length

Tahun pembuatan: 1993, Kondisi: bekas, en-001 Giodpfxou Nzycs Agreu

Kondisi: bekas, Tahun pembuatan: 1959, technische-details-spindeldurchmesser-160 Gedpsyzftxjfx Agrsiu

Kondisi: bekas, Tahun pembuatan: 2002, Technical Details: Pressure Capacity: 10 bar Tank Capacity: 350 l Gedpfx Asu Nz Sljgreiu Motor: 2 x 2.2 kW Flow Rate: 2 x 275 L/min Weight: 555 kg Total Power Requirement: 2.2 kW Dimensions (L x W x H): Compressor: 2.7 x 1.0 x 1.55 m Pressure Vessel Size: L: 2.4 x Ø 450 mm The DRY-RUNNING compressor is oil-free and sound insulated. Consists of: 2 compressors, each with 3 cylinders Technical data per compressor: - Continuous operation at 7 bar - For intermittent operation (max. 30 min/h at final overpressure): 10 bar - Direction of rotation: counterclockwise - Air-cooled Pressure vessel: - Manufacturer: Mehrer - Permissible operating pressure: 11 bar - Year of manufacture: 1995 Exhaust outlet: 1 1/2" reduced to 1", hose connection Ø 14 x 27 mm with shut-off valve Operation via control panel Permissible operating temperature: 50°C as per specification.

Kondisi: bekas, Tahun pembuatan: 2021, de-hu-001 Gisdpfxjxrdw Ie Agrsu

Kondisi: bekas, Tahun pembuatan: 2004, de-hu-001 Gisdpfx Agsyx Tnrorju

Kondisi: bekas, Tahun pembuatan: 1992, en-GB:Technical Details: Spindle diameter: 100 mm X-axis travel: 1,500 mm Y-axis travel: 1,450 mm Z-axis travel: 930 mm W-axis travel: 506 mm B-axis (table): 360° Control system for programming: HdH TNC 407 Tool holder: SK50 Spindle speed: 5 – 1,600 rpm, stepless Table load capacity: 4.0 t Table size: 1,100 x 1,400 mm Table rotatable: 360° Gedpfx Agou Idqborsiu Feed rates (X/Y/W/Z axis): 2 – 2,000 mm/min Rapid traverse (X/Y/W/Z axis): 5,000 mm/min Total connected load: 40 kW Electrical cabinet dimensions: 2,000 x 600 x 2,000 mm Machine dimensions (LxWxH): 4.9 x 3.7 x 3.8 m Approx. machine weight: 14 t CNC drilling and milling machine with hydraulic unit Equipment: - Touch probe - Electronic handwheel - Hydraulic weight compensation for Y-axis - Universal milling head - Various accessories available—please enquire! Subject to prior sale.

Tahun pembuatan: 1991, Kondisi: bekas, Technical details: Drive power: 0.16 kW Delivery pressure: 11 bar Output volume: 250 l Gjdpfxsu Nzxrs Agrsiu Total power requirement: 2.8 kW Piston compressor with pressure vessel Condition: Cylinder head gasket and steel plate defective. The piston is in good condition. Sale as a parts donor!

Kondisi: bekas, Tahun pembuatan: 1991, en-001 Gisdpju Nz Dnjfx Agrsu

Kondisi: bekas, Tahun pembuatan: 2021, Technical details: Gisdpou Nz D Uofx Agrou Operating pressure: 10 bar Total power requirement: 7.5 kW Volume flow rate: 1.1 m³/min Operating hours: 0 h Motor speed: 3,000 rpm Voltage: 400 V / Hz Rated power: 7.5 kW Approx. machine weight: 438 kg Dimensions (L x W x H): 1.0 x 0.55 x 0.85 m SCREW COMPRESSOR WITH ELECTRIC DRIVE with integrated air receiver - Type: ADST 8; Capacity: 6 liters; Size: Ø 160 x 400 mm with integrated dryer Operation via control panel on the unit Air filter front-mounted i.e. *

Kondisi: bekas, en_001_TechnicalDetails_2024-06-18 Giedpjvr S Ulofx Agrsu