Beli Hogger bekas (11)

Kondisi: baru, en-Hoku single-shaft shredder H 600 Feed opening: 600 x 800 mm Motor power: 15 kW Hopper volume: 0.6 m³ Rotor diameter: 260 mm Dimensions (L/W/H): 1,805 x 1,118 x 1,646 mm Weight: approx. 1,100 kg Hoku Single-Shaft Shredder H 600 - Compact, Robust, High Throughput ----- Technical Manufacturer Description: The H600 high-performance shredder, with its flexible application possibilities, is able to process all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer offcuts, etc.) into fuel chips, achieving significant volume reduction for bulky materials. The hydraulically controlled pusher feeds the wood waste to be shredded into the cutting area of the rotor, with automatic and load-dependent control. The high-performance E-rotor made of solid steel has a diameter of 252 mm and operates at a rotor speed of 85-95 rpm. The concave-ground, aggressive, and four-way reversible knives/cutting crowns are positioned in milled knife pockets on special knife carriers. This highly efficient system guarantees high throughput, low energy consumption, and optimal discharge of shredded material by reducing the cutting gap between the counter-knife and rotor. Chip size (10 - 60 mm) depends on screen perforation. Technical Data: Hopper opening: 600 x 800 mm Rsdpfxex Iwfmj Ahven Hopper volume: 0.6 m³ Working width of the rotor: 600 mm Rotor diameter: 260 mm Drive power: 15 kW Rotor speed: 90 rpm Number of knives: 14 pcs + 2 pcs Type & size of knives: - concave / 40 x 40 mm, cutting crowns - concave / 30 x 30 mm, clearing knives Screen perforation: 10-60 mm Connection value: 400 V +/- 5% / 50 Hz Includes: - Control cabinet (Rittal), incl. 5m cable - Electrical control (Siemens PLC) - Star-delta starting - Rubber vibration isolators - E-rotor with milled knife pockets in the profile - Gear limit switch - 1st knife row - Hold-down on the pusher for long and large pieces - Large 40 x 40 mm knives for optimal material intake - Very robust gearbox - Special clearing knives to prevent lateral jamming ----- Price for the above-mentioned machine upon request! Prices exclude packaging & shipping, plus VAT as required by law. (Technical data according to manufacturer – no guarantee!)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, This HOMAG KFL 526 / C was manufactured in 2006. The robust double-sided edge banding machine processes workpiece thicknesses from 12 to 40 mm and formats up to 2500 x 1200 mm. The equipment includes a gluing unit, a profile milling unit, and a finishing unit for precise edge processing. Ideal for efficient edge banding at speeds of up to 35 m/min. Contact us for further information about this machine. Additional equipment • Top/bottom separator spray unit / double pre-milling unit longitudinal/cross: 6.6 kW with electropneumatic control / gluing unit A3 - 2 rollers / profile milling unit FF12 top/bottom with motors at 12,000 rpm / finishing unit FA11 top/bottom / infinitely adjustable positioning cams with a maximum cam projection of 25 mm / standard milling unit SF20 6.6 kW / rough milling unit 0.55 kW • PUR Nordson melting station / tool kit / extraction duct Machine advantages Technical advantages • Workpiece thickness: 12 - 40 mm / minimum workpiece size (LxW): 250 x 240 mm / maximum workpiece size (LxW): 2500 x 1200 mm / maximum workpiece weight: 50 kg • Edge material thickness (roll): 0.4 - 3 mm / maximum edge cross-section (plastic): 135 mm² / maximum edge cross-section (veneer): 100 mm² / maximum roll diameter: 830 mm Rodpfx Ahsx U Uzrjvsn • Longitudinal processing speed: up to 35 m/min for thin edges up to 0.6 mm / up to 30 m/min for thick edges up to 3 mm • Cross processing speed: up to 30 m/min for panel dividing / up to 20 m/min for edge processing • Minimum workpiece gap: 500 mm

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dua sisi, Zusätzliche Ausstattung: Trennmittelsprühvorrichtung oben/unten / Doppelvorschneider Längs/Quer: 6,6 kW mit elektropneumatischer Steuerung / Leimauftragsstation A3 – 2 Walzen / Profilfräsaggregat FF12 oben/unten mit 12.000 U/min / Finish-Aggregat FA11 oben/unten / Stufenlos verstellbare Anschlagschablonen mit maximalem Schablonenauszug von 25 mm / Standardfräsaggregat SF20 6,6 kW / Vorschlichtaggregat 0,55 kW PUR OTT 2-kg-Schmelzstation Vorteile der Maschine Technische Maschinenvorteile Redpfx Ahexwui Ejvsn Werkstückdicke: 12 – 40 mm / Mindestwerkstückgröße (LxB): 250 x 240 mm / Maximalwerkstückgröße (LxB): 2500 x 1200 mm / Maximalwerkstückgewicht: 50 kg Kantenmaterialstärke (Rollenware): 0,4 – 3 mm / Maximale Kantenquerschnittsfläche (Kunststoff): 135 mm² / Maximale Kantenquerschnittsfläche (Furnier): 100 mm² / Maximaler Rollendurchmesser: 830 mm Längsbearbeitungsgeschwindigkeit: bis zu 35 m/min für dünne Kante bis 0,6 mm / bis zu 30 m/min für dicke Kante bis 3 mm Querbearbeitungsgeschwindigkeit: bis zu 30 m/min beim Plattenzuschnitt / bis zu 20 m/min bei der Kantenbearbeitung Mindestwerkstückabstand: 500 mm

Kondisi: bekas, Double-end profiler, edge processing machine, scoring motor, machining motor, spindle motor, milling motor - Manufacturer: Peske, milling motor type VS 31.09-4 - Power: 0.37 kW, 8,540 rpm at 300 Hz - Voltage: 165 volts - Tool holder: collet chuck - Tool diameter: 8 mm - Quantity: 2 motors available Rsdpfx Aeb A Tcwjhvon - Price: per unit - Dimensions: 260/60/H140 mm / 255/60/H155 mm - Weight: 3.5 kg/unit

Kondisi: bekas, Double-end profiler, edge processing machine, scribing motor, machining motor, milling motor, spindle motor Rodpfxjmdygij Ahvjn -Manufacturer: Perske, milling motor type DVMS 903/2 -Power: 0.4 kW, 12,000 rpm at 200 Hz -Voltage: 133 Volts -Spindle shaft: Ø 30 x 32 mm -Tool: Ø 70 x 20 mm / indexable insert milling cutter -Quantity: 1 unit available -Dimensions: 250/59/H140 mm -Weight: 3.8 kg

Kondisi: bekas, Double-end profiler, edge processing machine, scoring motor, machining motor, milling motor, spindle motor - Power: 0.4 kW, 12,000 rpm at 200 Hz - Voltage: 133 volts - Coupling shaft: Ø 20 mm - Tool: Ø 70 x 20 mm - with indexable insert milling cutter Rsdsb A Tctopfx Ahvjn - Quantity: 1 unit available - Dimensions: 285/60/H170 mm - Weight: 5 kg

Kondisi: bekas, Double-end tenoner, edge processing machine, scriber motor, cutting motor, spindle motor, milling motor -Manufacturer: Perske, milling motor for edge processing machines -Power: 0.15 kW, 11,160 rpm at 200 Hz -Voltage: 133 Volts Rjdpfsl Dvuajx Ahvsn -Spindle shaft: Ø 15 x 17 mm / M12 -Dimensions: 190/70/H85 mm -Weight: 1.8 kg

Kondisi: sangat baik (bekas), 4-sided formatting and edge banding line Panel dimensions: min. 195 x 250 x 60 mm / max. 1200 x 2500 x 60 mm The line consists of the following machines: KZ0400a) Infeed table "HOMAG" model TBL 100/25/12/S with motorized rollers Feed speed (adjustable): 7–40 m/min KZ0400b) First double-sided formatting and edge banding machine "HOMAG" model KFL 325/M1/C Feed speed (adjustable): 15–40 m/min with PC 22 FORMATTING SECTION: Double hogger KD10 (2 x 6.6 kW) + Gluing unit: A3 with double roll magazine Redpfx Ahsiztxyeven EDGEBANDING SECTION: Top and bottom flush trimming unit BF10 (2 x 0.55 kW), PC-controlled fine trimming unit PF20 (2 x 0.4 kW), Groove milling unit for rebates and grooves UF11 (4 kW), open position, profile scraping unit PN10, finishing unit (flat scraper + smoothing unit) KZ0400c) Rotating station (90° LONGITUDINAL-TRANSVERSE) "HOMAG" model TDL 310/25/12 (from longitudinal to transverse) Feed speed (adjustable): 20–60 m/min KZ0400d) Second double-sided formatting and edge banding machine "HOMAG" model KFL 326/M2/C Feed speed (adjustable): 15–32 m/min with PC 22 FORMATTING SECTION: Pre-milling cutter (chamfering) (1 x 4.5 kW), double hogger KD10 (2 x 6.6 kW) + Gluing unit: A3 with double roll magazine EDGEBANDING SECTION: Cross-cutting unit HL 84 (2 x 0.22 kW), top and bottom flush trimming unit BF10 (2 x 0.55 kW), PC-controlled fine trimming unit PF20 (2 x 0.4 kW), profile copying milling unit FF32 (4 x 0.4 kW), open position, profile scraping unit PN10, finishing unit (flat scraper + smoothing unit) MINIMUM EDGE LENGTH 70 MM (workpiece thickness for narrow parts max. 25 mm, edge thickness max. 2 mm, cycle speed: max. 20 pcs/min, feed speed max. 20 m/min.)

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 4850 x 4650 x 1820 mm Weight: 6,500 kg Total Power Requirement: 47 kW Double-End Tenoner INDUSTRY SERIES 8025H - 8 Units Redpfsvz E R Ssx Ahven - Working width min./max.: 300 - 2,500 mm - Working height min./max.: 10 - 120 mm - Feed rate steplessly adjustable: 6 - 36 m/min - Feed motor: 4.0 kW - Width adjustment motor: 0.75 kW - Total connected load: 47.0 kW - Voltage: 400 V / 50 Hz - Extraction duct diameter: 8 x 120 mm - PLC + touch screen control - Transport chain with cams, pitch 500 mm - Infeed length: 1,500 mm for panels / floorboards / furniture panels / doors Scoring saw: - Motor: 2.2 kW - Speed: 3,000 rpm - Saw blade mounting: Ø 30 mm - Saw blade diameter min./max.: 160 - 200 mm Cross-cut saw (hogger): - Motor: 5.5 kW - Speed: 3,000 rpm - Saw blade mounting: Ø 30 mm - Saw blade diameter min./max.: 200 - 300 mm 1st Milling Spindle: - Motor: 5.5 kW - Speed: 7,500 rpm - Spindle mounting: Ø 40 mm - Tool diameter min./max.: 108 - 180 mm - Jumping (pneumatically controlled in and out) 2nd Milling Spindle: - Motor: 7.5 kW - Speed: 7,500 rpm - Spindle mounting: Ø 40 mm - Tool diameter min./max.: 108 - 180 mm - Swivel range: +60° to -30° - Dimensions L=4,850, W=4,650, H=1,820 mm - Weight: 6,500 kg

Tahun pembuatan: 2005, Kondisi: bekas, Universal machine for eroding, grinding and polishing various PCD tools up to 400 mm diameter and 400 mm length in production. Accessories: - Full enclosure - Path curve management software Redpfx Aew S I Dgjhvsn - P-System software for helical cutters - End mill software (207/208) - Software for disc-shaped workpieces, face side (221/222/223/224) - Software for profiled workpieces (233/234/239/240) - Software for milling cutters, profiled milling cutters (255/256/257/258/260/261/262/263) - Software for disc-shaped workpieces (264/265) - Software for shank and joining cutters (267/268/277/278) - Software for stepped tools (271) - Software for slot saws (299) - Software for flat tooth saws (301) - Software for single-sided bevel saws (302/303) - Software for alternate tooth saws (304) - Software for trapezoidal tooth saws (309) - Software for flat-roof tooth saws (310) - Software for flat-trapezoidal tooth saws (311) - Software for alternate tooth saws with bevel (312) - Software for shank and joining cutters (7/8) - Software for profiled shank and joining cutters (33/34) - Software for milling cutters, profiled milling cutters (53/54/55/56/57/58) - Software for disc-shaped workpieces (64/65) - Software for shank and joining cutters (67/68/77/78) - Compensation software (90) - Software for flat tooth saws (101) - Software for single-sided bevel saws (102/103) - Software for alternate tooth saws (104) - Software for trapezoidal tooth saws (109) - Software for flat-roof tooth saws (110) - Software for flat-trapezoidal tooth saws (111) - Software for alternate tooth saws with bevel (112) - Software for polishing profiled milling cutters (757/758/760/761) - Dielectric filter system - Automatic fire extinguishing system to DIN 14497 - Standard programs for measuring, eroding, etc. - Software program for chamfering workpiece cutting edges, automatic diagnostics (machine operation status program with text output on screen) - Software for helical cutters

Kondisi: bekas, Tahun pembuatan: 2013, Numerical control PC (office) with Widge Plus software Machine suitable for first and second panel pass Motorized mobile shoulder opening via N.C.: 3200 mm Panel width min - max: 215 - 3200 mm Panel height min - max: 10 - 60 mm Edge thickness in coil min - max PVC-ABS: 0.3 - 3 mm Continuously variable feed speed: 10 - 40 m/min Motorized pressure rubber belt Rsdpfx Aok Egvdehvon Support track with retractable pins Pin height: 12 - 18 - 25 mm Distance between retractable pins: 500 / 400 mm Working units mounted on NC-motorized top tables Squaring section consisting of (per side): - Anti-adhesive unit - Time-controlled splinter protection system - Double chipping unit Edge section consisting of (per side): - Gluing system with premelter for PUR adhesive and premelter for EVA adhesive - Edge pressure rollers electronically controlled by N.C. - Edge holder magazine with 6 positions - Trimming unit with two motors - Overlapping cutting unit - Staggered finishing unit with two electronically NC-controlled motors - Rounding unit with 4 motors 0-90° tilting planing unit, electronically CN-controlled (mobile shoulder) 0-90° tilting milling unit + double stacked milling spindle (fixed shoulder) Anti-adhesive units Edge scraper unit Glue scraper unit Brushing unit Phon unit