Motor penggilingan untuk mesin pengolah tepi

Perske VS 31.09-4

Kondisi: sangat baik (bekas), DOUBLE-SIDED FEEDING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 horizontal upper support beam (with carriage gliding on it) No. 1 motorized carriage with horizontal metal arms External roller conveyor (on the floor) for feeding stacks of panels to the feeding station Fgsdsfi Tg Hopfx Alyef External motorized roller conveyor (receiving panels from the feeding station) Separate electrical control panel Perimeter safety fencing with safety mats Operating capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Minimum panel dimensions mm 250 x 320 (approx.) Maximum panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Kondisi: bekas, Tahun pembuatan: 2009, Numerical control unit POWER CONTROL PC 22 Machine suitable for the 1st and 2nd processing pass of the panel Mobile, NC-controlled shoulder opening, motorized, 3000 mm Maximum panel height: 60 mm PVC-ABS edge thickness: 3 mm Feed speed: 40 m/min Feed speed with corner rounding: 20 m/min Motorized rubber pressure belt Support rail with retractable pin (distance between pins: 500 mm) Squaring section consisting of: Anti-adhesive unit Time-controlled, automatic chip protection unit Double trimming unit Provision for group extension at each station Glue application unit with premelter and glue pot Automatic adjustment of edge pressure rollers Edge holder magazine with 2 positions End trimming unit with two motors Overlap cutting unit Corner rounding unit (FK group) Edge scraper unit Glue scraper unit Fgsdspp Tkfopfx Alyef Buffing unit Anti-adhesive unit

Tahun pembuatan: 2006, Kondisi: siap digunakan (bekas), An on-site inspection is possible. Fgjdjqvnmbjpfx Alyjf

Kondisi: sangat baik (bekas), Double-sided solo machine (or 1st and/or 2nd machine in a machine line) Roll material (edge) thickness (min/max) mm: 0.6 - 3 Panel thickness (min/max) mm: 8 - 60 Working width (min/max) mm: 225 - 3,000 Control/Software: Power Control PC 22 – Wood Commander Feed speed (adjustable) m/min: 15 - 32 Cam spacing (mm): 400 SIZING (for each side): - Protective cutter (pre-milling): 1 x 4.5 kW - Chipping cutter KD 11 (2 x 6.6 kW) EDGE BANDING SECTION (for each side): - Gluing unit (hot-melt glue + premelter): A3 + SERVO - Edge pressure zone “A” - Edge magazine for rolls (magazine slot no. 2) Fedpfx Alep N D Ngoyogf - End trimming unit HL 84 (2 x 0.22 kW) - Pre-milling unit (2 x 0.55 kW) - Milling unit 2 x 0.4 kW - Profile milling unit (copy) FF 12 (4 motors x 0.4 kW) LEFT SIDE: 2 x universal milling units (electropneumatic control) UF 11 (4 kW x 2) 0°-90° RIGHT SIDE: 1 x universal milling unit (electropneumatic control) UF 11 (4 kW x 1) 0°-90° Multi-profile scraper unit PN10 (PNEU) Finishing unit (flat scraper + polishing unit) FA 11

Kondisi: sangat baik (bekas), Double-sided edge banding and formatting machines – First (1st) machine in the line Edge thickness in rolls (min/max) mm Edge thickness in strips/bands (min/max) mm Panel thickness (min/max) mm 12 - 60 Working width (min/max) mm 1300 Control/Software: ICOS open Feed speed (adjustable) m/min 9 - 45 No transfer bar (Master & Slave systems) Top pressure driven by V-belt FORMATTING UNIT (for each side): Jointing/milling unit 75.30 (kW 6.6 x 1) Fsdpfx Alsfi Tkgeyegf EDGE BANDING SECTION (for each side): Gluing unit (P.U.R. glue + pre-melter) 04.1569 + 283.205 Pressure rollers (revolver) for straight and formed edges (softforming) mm 1,050 Edge magazine for rolls (magazine slots) 6 End trimming unit 08.42 (kW 0.2 x 2) 40 m/min Pre-milling unit 08.055 (kW 0.66 x 2) 0°-30° Milling unit 08.0582 (kW 0.66 x 2) 0°-30° Flat scraper unit 08.50 Buffing unit 08.617-2 (kW 0.18 x 2)

Kondisi: perlu perbaikan (bekas), Tahun pembuatan: 2002, Fungsionalitas: tidak berfungsi, ★ HARGA DISKON – PENJUALAN CEPAT: 50.000 € (sebelumnya 80.000 €) ★ Kami menjual 3 unit pengering kayu Imea 2002 (Imea) + pembangkit uap + boiler (Elbi). 3 unit pengering kayu dan 1 unit pembangkit uap: Dimensi: 12,5 m x 7,2 m x 4,2 m 📐 Kapasitas untuk setiap pengering: 220 m3 kayu 🌳 Pembangkit uap: 8,5 m x 6 m x 5 m 📐 Struktur aluminium, panel sandwich 🏗️ Boiler kayu dan serbuk gergaji: Fjdpjpugxnsfx Alyegf Dilengkapi dengan sistem pompa, pipa, dan boiler Daya: 3.500.000 kCal/jam (40.000 kW) Semua beroperasi pada sistem otomatis. Total: 50.000 € ditambah PPN 💰 Pembongkaran dilakukan oleh pembeli 🔧 Penjual dapat membantu dengan menyediakan alat pemuat teleskopik. 📍 Alamat pengambilan: Teiu 337291, Rumania 🌍 Untuk informasi lebih lanjut atau untuk mengajukan penawaran, silakan hubungi kami.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, working width 250mm working height 140mm 8 heads 3 toothed feed rollers on the infeed table Fgodpfeww H Rwsx Alyjf head arrangement: bottom/right/left/right/left/top/top/bottom infinitely variable feed speed up to 100m/min spindle diameter 50mm spindles supported on both sides feed via cardan shafts spindle speed 6000 rpm pneumatic pressure on feed rollers head adjustment in two axes cast iron machine frame

Kondisi: bekas, Tahun pembuatan: 1997, 3214 Continuous Veneer Press Sergiani LAS Plus Used, year of manufacture: 1997, already dismantled and stored Automatic press with continuous operation for the production of blockboard doors, finished doors (veneered doors, HPL, CPL), and pre-finished parquet (2 - 3 layers). The press allows workpieces to be loaded consecutively while the pressure in the other chambers is maintained. Up to 2 operators are required for line operation. The multi-level press enables very high production capacity. Pressing time per cycle is approx. 3 minutes (180 seconds) divided over 10 levels, opening every 18 seconds to process a new panel. The press is dismantled and stored. The system was in operation until dismantling. The previous owner used the press for 3-layer parquet production. The bottom layer was placed manually. The middle layer consists of a single piece, glued on both sides and fed in automatically. The top layer was also automatically fed. Glue application machine / glue delivery system not included (available as an option) Levels: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm (L x W) Heating: Hot water Application: Production of doors, multi-layer pressing, veneer and engineered wood processing High productivity with a capacity of up to 1200 doors per shift (factory data) Vacuum loading system with 2-track infeed roller conveyor, without gluing Scissor lift table with belt conveyor (belt approx. 2900 x 1000 mm L x W) Vacuum stacking station with outfeed roller conveyor Required space for press with loading table: approx. 6500 x 2365 mm (L x W) Required space for complete production line: approx. 25000 x 5710 mm (L x W) Sale on behalf of customer, located near 5020 Salzburg (Austria), excluding transport and installation Loading and transport by us possible as an option Errors in description and price reserved To avoid possible misunderstandings, on-site inspection by appointment is possible and recommended Sale as is Technical specifications, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure and previous owner, without guarantee Subject to prior sale No warranty on used machinery, sold as inspected Photos and videos are for illustration and may not represent actual scope of delivery Fgjdpfxov Sthge Alysf Payment: Prices plus statutory VAT; payment due before collection or shipment Delivery: ex site.

Kondisi: bekas, Dimter Profipress L 2500 Tahun pembuatan: 2006 Dimensi: • Lebar bilah (untuk panel): 30-150 mm • Ketebalan: 11-60 mm • Panjang masuk: 800-2500 mm • Lebar panel: variabel, hingga maksimal 1300 mm • Lebar pengisian per siklus: min. 650 mm / maks. 1300 mm • Unit hidraulik terintegrasi untuk daya tekan dan motor hidraulik • Kelistrikan: Fgsdpfx Aljyhggrsyof • Tegangan operasional: sekitar 400 V / 50 Hz • Nilai sambungan listrik untuk generator HF 40 kW: 56 kW

Kondisi: baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, HESSEMANN 3-HEAD SANDER: Abrasive belt dimensions: 2,620 x 1,400 mm 1 Longitudinal sanding unit (with contact roller for calibration work (steel)) Roller diameter: 250 mm Belt speeds: approx. 18 m/s 22 kW Anti-wear brake unit, automatic belt length adjustment Dust extraction system controlled according to workpiece presence, counter-rotating sanding belt, abrasive belt grain compensation by computer Belt speeds: 1.0 - 18 m/s Drive: 15 kW Fgedpfx Alsx Rdn Toyof 1 Longitudinal sanding unit Belt speeds: 1.0 - 18 m/s Drive: 15 kW Incl. continuously adjustable sanding speed via electronic frequency inverter, double purge opening connection for dust extraction device. Anti-wear brake unit, automatic adjustment of differing belt edge lengths, dust extraction system controlled according to workpiece presence, disconnectable, counter-rotating sanding belt. 2 pressure beams with selectively adjustable pressure system - CSD® system Continuously adjustable pressure of individual pressure elements for single and multiple feed. Spacing: 32 mm. Workpiece tolerance compensation up to 2 mm by maintenance-free pressure magnets. Working width, as well as the start and end of sanding on the pressure beam, are electronically adjustable. The pressure elements are activated by electromagnetic lifters capable of continuously varying the force of each sanding pad as the workpiece passes through the machine. This innovative CSD® technology always ensures proportionally equal pressure in relation to pad overlapping on the workpiece. The risk of edge-through sanding is virtually eliminated by this continuous, dynamic control of pressure force.