Beli Index C 200 bekas (139)

Kondisi: bekas, Mesin bubut otomatis satu spindel INDEX B42 Cjdpfxoxt U H Aj Abhogn

Kondisi: bekas, Mesin bubut otomatis satu spindel INDEX B30 Cgsdjxt U Hvjpfx Abhen

Kondisi: bekas, Tahun pembuatan: 2024, de Cedpfx Aboxnrtcshogn

Kondisi: baik (bekas),

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1991, nomor mesin/kendaraan: MS 25E19111, Number of spindles: 6 Spindle bore: 27 mm Turning length: 59 mm Hexagonal material: 24 mm Square material: 18 mm Cross slide travel: 36 mm Longitudinal slide travel: 85 mm Spindle speeds: 366 – 5,020 rpm Torque: 95 Nm Control: INDEX Total power requirement: 20 kW - 6 cross slides - 6 longitudinal slides - Multi-edge device Cedpfsv Raatsx Abhsgn - Thread cutting device - Hydraulic pick-off unit - Workpiece discharge conveyor - Bar feeder: IEMCA type PRA 40/35/P

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 500641, panjang pembubutan: 710 mm, diameter pembubutan: 300 mm, jarak pergerakan sumbu X: 215 mm, jarak lintasan sumbu Y: 180 mm, jarak gerak sumbu Z: 710 mm, tinggi total: 2.150 mm, panjang total: 2.150 mm, lebar total: 3.160 mm, TECHNICAL DETAILS Spindle Working Area Spindle bore for collet clamping: 65 mm Spindle Ø at front bearing: 110 mm Max. speed n: 5,000 rpm Spindle nose ISO 702/1 size: 6 Chuck diameter: 250 mm Max. torque Md 100%: 275 Nm Max. power P 100%: 43 kW Tailstock electrically traversable Centre distance (710): 740 mm Max. clamping force (electric): 10,000 N Cross Slide 1 XYZ (upper) X-axis travel: 215 mm Y-axis travel: 180 mm Z-axis travel: 710 / 1,250 mm Feed force X-axis: 8,000 N Feed force Y-axis: 16,000 N Feed force Z-axis: 13,000 N Rapid traverse speed X-axis: 20 m/min Rapid traverse speed Y-axis: 7.5 m/min Rapid traverse speed Z-axis: 20 m/min Resolution X-axis: 0.0005 mm Resolution Y-axis: 0.0005 mm Resolution Z-axis: 0.001 mm Tool Carrier Cgjdpfjwxw Upex Abhon Number of tools: 12 Tool system DIN 69 880: Ø30 mm MACHINE DETAILS Dimensions and Weights Height: 2,155 mm Base area (710): 4,140 mm x 2,155 mm Installation area (710) without material guide: 4,140 mm x 3,570 mm Weight (710): approx. 6,500–7,700 kg Three-phase current: 400 V, 50/60 Hz Connected load: 24 to 83 kVA Main fuse in supply line: 35 to 125 A EQUIPMENT Milling spindle set 6-position tool changer HKS-50B KM40 Material unloading device Workpiece handling WHU201 / WHW80/700 Chip conveyor: hinged belt Discharge height 1,250 mm Coolant fine filtration hydrostatic paper band filter Vacuum rotation filter W-UAT-106A MMS system LUBRIX 750

Kondisi: bekas, Tahun pembuatan: 1990, Turning diameter 60 mm Turning length 200 mm Number of slides Total power requirement 20 kW Machine weight approx. t Space requirements approx. m Cedpfot Hw Atsx Abhogn Spindle bore 30 mm, Control system INDEX C 200, Spindle speed 7,500 rpm, rear-side machining, 3-jaw chuck, driven tools, workpiece loader WHU 80

Kondisi: bekas, Tahun pembuatan: 1995, Here is the English technical translation optimized for platforms like Machineseeker and TruckScout24: INDEX (Germany) CNC Slant-Bed Lathe with Turret, Tailstock, and INDEX CNC Control C 200-4 (SIEMENS) Cgjdpfot Hw Sujx Abhsn Model: G 300 Year: 1995 S/N: 5000 65 Technical Data: - Max. Turning Diameter (with chuck): 300 mm - Spindle Bore: approx. 90 mm - Max. Workpiece Swing Diameter: approx. 400 (max. 590) mm - Max. Turning Length / Centre Distance: approx. 710 mm - Turret Slide Travel (Z axis / longitudinal): 710 mm - Turret Slide Travel (X axis / cross): 140 mm - Rapid Traverse Speed Tool Carrier: 20 m/min - Turret with 12 tool positions for DIN 30 tool holders (approx. 40 different holders included as accessories) - Feed Force X/Z Axis: 8/13 kN - Stepless Spindle Speeds: up to 5,000 rpm - Max. Spindle Torque at 100% ED: 275 Nm - Spindle/Tool Drive Power: approx. 28 kW - Total Power Requirement: approx. 40 kW, 400 V, 50 Hz - Machine Weight: approx. 6,000 kg Accessories / Special Features: • SIEMENS CNC 3-Axis Path Control Type SINUMERIC 840 C or INDEX C 200-4 for the following axes: Turret 1 = X/Z as well as C-axis (spindle orientation). The control panel is mounted left and can be swiveled. • Alignment and indexing device for the main spindle • Forkhardt KFD-HS 250 hydraulic 3-jaw chuck fitted, with numerous jaws, max. speed 5,000 rpm • INDEX turret with 12 tool positions for DIN 30 tooling; approx. 40 additional tool holders included as accessories. Turret stations are prepared for driven tools, drive via the indexing device motor. • Hydraulic tailstock with eccentricity correction, quill 60 mm, operable via footswitch • KNOLL mobile chip conveyor with coolant facility and high-pressure pump • Front sliding door, otherwise complete enclosure. Oil skimmer This machine is ideal for shaft machining as well as for chuck workpieces. Very robust construction! (Please let me know if you need adaptations for other platform requirements or an export summary.)

Kondisi: bekas, Tahun pembuatan: 2002, Max. turning diameter: 420 mm Turning length: 1,250 mm CNC Control: INDEX, C 200-4 D Swing diameter: 630 mm Travel X1: 320 mm Travel Z1: 1,250 mm Travel X2: 170 mm Travel Z2: 1,250 mm Travel X3: 320 mm Travel Z3: 1,250 mm Max. main spindle speed: 3,000 rpm Main spindle drive: 53 kW Spindle bore: 102 mm Spindle nose: DIN 55026 size 11 Spindle torque: 675 Nm Counter spindle - max. spindle speed: 3,000 rpm Counter spindle drive: 53 kW Counter spindle - spindle bore: 102 mm Counter spindle - spindle nose: DIN 55026 size 11 Counter spindle - torque: 675 Nm Counter spindle travel: 1,250 mm Feed force X1: 14,000 N / Z1: 14,000 N Rapid traverse X1: 20 m/min / Z1: 40 m/min Feed force X2: 8,600 N / Z2: 14,000 N Rapid traverse X2: 20 m/min / Z2: 40 m/min Feed force X3: 14,000 N / Z3: 14,000 N Rapid traverse X3: 20 m/min / Z3: 40 m/min Number of turret positions, Turret 1 = 12 Number of turret positions, Turret 2 = 10 Number of turret positions, Turret 3 = 12 Number of driven tool stations: 12 / 10 / 12 Max. driven tool speed: 6,000 rpm Torque (driven tools): 36 / 21 / 36 Nm Tool shank DIN 69880 Tool holder Ø 40 x 63 mm Total connected load: 120 kW Machine weight approx.: 19 t Machine dimensions (L x W x H): 5.77 x 2.47 x 2.62 m Accessories: - HAINBUCH segmented collet chuck on main spindle - HAINBUCH collet chuck, SPANNTOP SP on counter spindle - Various tool holders (including for driven tools) - Chip conveyor Cjdjt U R Hzopfx Abhsgn - Coolant system Note: All three tool turrets are prepared for through-tool coolant (IKZ), however, the high-pressure system is not included with the machine.

Kondisi: bekas, Tahun pembuatan: 1998, Number of spindles: 6 Spindle bore: 27 mm Turning length: 59 mm Hexagonal material: 24 mm Cgsdpfjvh Naqox Abhon Square material: 18 mm Cross slide travel: 36 mm Longitudinal slide travel: 85 mm Spindle speeds: 366 - 5,020 rpm Torque: 95 Nm Control: INDEX Total power requirement: 20 kW - 6 cross slides - 6 longitudinal slides - Polygon machining attachment - Thread cutting device - Hydraulic pick-off device - Workpiece discharge conveyor - Bar loading magazine manufactured by PIETRO CUCCHI, type AN-BN Accessories: various tool holders, various collets, chip conveyor, coolant system

Kondisi: bekas, Tahun pembuatan: 2001, Material pass-through max. 90 mm Front bearing diameter 140 mm Main spindle speed 4,200 rpm Power 35.5 kW Control INDEX C 200-4 Travel path - X 1,500 mm Travel path - Z 340 mm Travel path - Y 180 mm B-axis 360° CNC Vertical Turning and Milling Center | INDEX V300 equipped with a turret for driven tools as well as Y and B axes. Additional information: - Direct measuring system on X and Z axes. The machine is in good condition. For further equipment details, please refer to the original order confirmation attached to the offer. Codpfxjvzcnbj Abhogn #Tags: V-300 | V 300

Kondisi: sangat baik (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 080005, Turning diameter over carriage: 1,920 mm Centre height: 1,300 mm Distance between centres: 2,000 to 30,000 mm Maximum workpiece weight: 10–40 tons Bed width: 2,119 mm Spindle speed: 1–500 rpm Number of gear steps: 4 Spindle nose: A2-15 Spindle motor: 30/37 kW (optionally up to 60/75 kW) Spindle bore: 230 mm (expandable up to 610 mm) Turret type: servo, 4 or 10 positions Tool cross-section: 50/40 mm X-axis travel: 1,200 mm Z-axis travel: 2,000 to 30,000 mm Cgjdpfxswab Rdo Abhjn X-axis ballscrew: 63 mm x P10 Z-axis ballscrew: 63 mm x P10 (over 5 m: 80 mm x P10) Tailstock quill diameter: 235 mm (optionally up to 360 mm) Tailstock quill stroke: 250 mm (optionally up to 300 mm) Tailstock quill taper: MT #7 Rapid traverse: 7 m/min

Kondisi: sangat baik (bekas), Perfekt erhaltener sechsspindliger INDEX MS 25 Mehrspindel-Drehautomat mit jeweils sechs Quer- und Längsführungen für Werkzeuge. Codpfjqhkukox Abhjgn Der Preis ist verhandelbar und richtet sich nach dem gewählten Zusatzequipment: Spannzangen, Werkzeuge, Späneförderer usw. Die Maschine befindet sich noch im Produktionseinsatz. Besichtigung nach Absprache möglich.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 1.250 mm, diameter spindel: 90 mm, jumlah slot dalam magazin alat: 24, Recently renewed (January 2024): Guides Z2 / Z4 / X2; Ball screws Z2 / X2 / Z4; Cables and hoses for drag chains of Z2 / X2 / Z4 TECHNICAL DETAILS Turning length: 1,250 mm Spindle bore HSP/GSP: 90 / 90 mm Cjdjvitznopfx Abhsgn Spindle nose HSP/GSP: Taper No. 8 C-axis HSP/GSP: yes (C4) / yes (C3) Turret 1 Axes: XYZB Stations / driven: 12 / 6 Additional milling spindle: Capto C4 with automatic tool changer for 6 tools Turret 2 Axes: XZ Stations / driven: 12 / 6 Coolant system Type: Knoll unit with paper band filter Low pressure: 8 bar High pressure: max. 80 bar EQUIPMENT - 2x Hainbuch 65 chucks - Numerous turning and drilling holders with CDI interface - Mechanical steady rest for mounting on turret - Numerous driven tools CDI-Capto C4 radial and axial - Numerous static holders CDI-Capto C4 radial and axial

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), A fully overhauled CNC multi-spindle lathe by Index, refurbished in 2020, is available. Number of spindles: 6, maximum bar capacity: 32 mm, spindle speed: 6300 rpm, weight: approx. 10,800 kg, control system: Siemens Sinumerik. Spindle bearing status measurements in 2024: HS1: 14.35, HS2: 15.45, HS3: 10.37, HS4: 11.16, HS5: 17.44, HS6: 7.54. The machine has undergone extensive refurbishment on the spindles, cooling system, bearings, hydraulic lines, and more. Documentation is available. On-site inspection is possible. Codpfxswr Dw Rj Abhogn

Kondisi: baik (bekas), Index GE42 clamping cylinder GG2713.2101 in good condition Cgjdpfxofbup Ro Abhon

Kondisi: sangat baik (bekas), Index MS42C Bar guide HBF Oil distributor Flaps with clamping screws Csdpefdr R Uofx Abhegn

Kondisi: diremajakan ulang (bekas), Index ER 25 long-turning device GT 2351.1300 3 units in stock Codpfefc Rmcex Abhogn

Kondisi: baru, Traces of storage Csdpfxswcq Tyj Abhegn

Kondisi: bekas, Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 500358, panjang pembubutan: 1.250 mm, diameter pembubutan: 300 mm, daya motor spindle: 43 W, kecepatan spindel (maks.): 5.000 rpm, lubang spindel: 65 mm, INDEX G300L with Promot gantry loader. The machine is still in production and powered on. The Promot loader features 2 rotary transfer conveyors, each with approximately 30 pallet positions. The machine is equipped with high-pressure coolant system (40 bar), paper band filter, and tool changer. Further information available on request via email. Cedpfx Aju Nmq Hsbhogn

Kondisi: sangat baik (bekas), Tahun pembuatan: 1990, 1 x multi-spindle automatic lathe Manufacturer: Index Model: MS 25 Csdju Hgduspfx Abhogn Year of manufacture: 1990 Including bar feeder Iemca PRA 40/33 P Extensive range of accessories included. The machine can be inspected under power.

Kondisi: bekas, TECHNICAL DATA - Maximum diameter: 26 mm - Maximum feed length: 125 mm - Spindle speed: 366 – 5,020 rpm - Number of spindles: 6 - Central block stroke with taper: 85 mm Cgedpeuhanaofx Abhen Hydraulic option: 200 mm - Cross-slide stroke with taper: 36 mm Hydraulic option: 56 mm - Dimensions: 5,728 x 1,080 x 1,816 mm - Weight: 5,200 kg EQUIPMENT - Counter spindle - Base + drum

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 6 - Max. diameter: 32 mm - Spindle speed: 6,300 rpm - Slide unit 1.1: X and Z axes CNC-controlled - Slide unit 1.2: X and Z axes CNC-controlled - Slide unit 2.1: X and Z axes CNC-controlled - Slide unit 2.2: X and Z axes CNC-controlled - Slide unit 3.1: X and Z axes CNC-controlled - Slide unit 3.2: X and Z axes CNC-controlled - Slide unit 4.1: X and Z axes CNC-controlled - Slide unit 4.2: X and Z axes CNC-controlled - Slide unit 5.1: X and Z axes CNC-controlled - Slide unit 5.2: X and Z axes CNC-controlled - Slide unit 6.1: X and Z axes CNC-controlled with counter spindle - Slide unit 6.2: X and Z axes CNC-controlled EQUIPMENT - CNC control: SIEMENS 840D - Counter spindle - Polygon turning unit: Slide unit 5.1 - Bar feeder: IEMCA SIR MS32/33 P - Coolant tank: KNOLL * with high-pressure pump - Chip conveyor: KNOLL - Cooling unit - Parts removal Cgodouhatpspfx Abhon - Parts ejector - Fire protection system: KRAFT UND BAUER * Note: Functionality not guaranteed. Must be checked by a qualified company commissioned by the buyer.

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 6 - Max. diameter: 32 mm - Spindle speed: 6,300 rpm - Slide unit 1.1: X and Z axes CNC-controlled - Slide unit 1.2: X and Z axes CNC-controlled - Slide unit 2.1: X and Z axes CNC-controlled - Slide unit 2.2: X and Z axes CNC-controlled - Slide unit 3.1: X and Z axes CNC-controlled - Slide unit 3.2: X and Z axes CNC-controlled - Slide unit 4.1: X and Z axes CNC-controlled - Slide unit 4.2: X and Z axes CNC-controlled - Slide unit 5.1: X and Z axes CNC-controlled - Slide unit 5.2: X and Z axes CNC-controlled - Slide unit 6.1: X and Z axes CNC-controlled, with counter-spindle - Slide unit 6.2: X and Z axes CNC-controlled EQUIPMENT - SIEMENS 840D CNC control Cjdsuhatcjpfx Abhjgn - Counter-spindle - Polygon turning attachment: Slide unit 5.1 - Bar feeder: IEMCA SIR MS32/33 P - Coolant tank: KNOLL * with high-pressure pump - Swarf conveyor: KNOLL - Cooling unit - Parts removal - Parts ejector - Fire protection system: KRAFT UND BAUER * Note: Functionality not guaranteed. To be inspected by a qualified company on the buyer’s side.

Kondisi: bekas, TECHNICAL DATA Cgjdjuhbgwepfx Abhsn - Spindle power: 10.5 kW - Spindle speed: 10,000 rpm - Spindle type: A2-4 - Travels X/Y/Z: 280/280/145 mm - Rapid traverse: 50 m/min - Worktable travel X/Z: 110/90 mm - Number of tools: 8 - Driven tools speed: 6,000 rpm - Driven tools power: 9.5 kW - Tool type: Capto C4 - Dimensions: 1,700 x 3,000 x 2,400 mm - Weight: 4,000 kg - Installed power: 2.5 kW EQUIPMENT - Siemens 840D CNC control - C axis