Beli Index Er 42 bekas (158)

Kondisi: baru, Driven back side machining for MS52, positions 6.4 / 6.5 Fsdpfxsp S Sabe Aaqsgb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 500522, kecepatan spindel (maks.): 3.500 rpm, berat keseluruhan: 6.500 kg, diameter spindel: 140 mm, kecepatan spindle sekunder (maksimal): 3.500 rpm, DETAIL TEKNIS Fedpjxvq Rpjfx Aaqjgb Sistem Kontrol: Siemens Sinumeric / Index C200-4D Spindel Utama Lubang spindel dengan collet: 90 mm Diameter spindel pada bantalan depan: 140 mm Hidung spindel ISO 702/1 (ukuran): 8 Diameter chuck: 250/315 mm Maks. diameter putar nominal: 270 mm Maks. diameter lingkaran kerja: 590 mm Kecepatan putar: maks. 3.500 rpm Spindel Lawan Lubang spindel dengan collet: 90 mm Diameter spindel pada bantalan depan: 140 mm Hidung spindel ISO 702/1 (ukuran): 8 Diameter chuck: 250/315 mm Kecepatan putar: maks. 3.500 rpm Jarak minimal collet: 20 mm Kecepatan rapid traverse: 22,5 m/menit Pemegang Alat Jumlah alat: 12 DETAIL MESIN Dimensi & Berat Luas lantai: ca. 8/10,5 m² Tinggi: 2.150 mm Berat mesin ca.: 6,5 t PERLENGKAPAN Senter Sistem pemuatan dan pembongkaran otomatis

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Banyak suku cadang untuk mesin Index K-16: collet, kurva, dudukan alat, poros, roda gigi, sliding, ring jarak, limit switch, dan lainnya. Lihat foto terlampir. Fedpjx Ty Uusfx Aaqogb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 500641, panjang pembubutan: 710 mm, diameter pembubutan: 300 mm, jarak pergerakan sumbu X: 215 mm, jarak lintasan sumbu Y: 180 mm, jarak gerak sumbu Z: 710 mm, tinggi total: 2.150 mm, panjang total: 2.150 mm, lebar total: 3.160 mm, TECHNICAL DETAILS Spindle Working Area Spindle bore for collet clamping: 65 mm Spindle Ø at front bearing: 110 mm Max. speed n: 5,000 rpm Spindle nose ISO 702/1 size: 6 Chuck diameter: 250 mm Max. torque Md 100%: 275 Nm Max. power P 100%: 43 kW Tailstock electrically traversable Centre distance (710): 740 mm Max. clamping force (electric): 10,000 N Cross Slide 1 XYZ (upper) X-axis travel: 215 mm Y-axis travel: 180 mm Z-axis travel: 710 / 1,250 mm Feed force X-axis: 8,000 N Feed force Y-axis: 16,000 N Feed force Z-axis: 13,000 N Rapid traverse speed X-axis: 20 m/min Rapid traverse speed Y-axis: 7.5 m/min Rapid traverse speed Z-axis: 20 m/min Resolution X-axis: 0.0005 mm Resolution Y-axis: 0.0005 mm Resolution Z-axis: 0.001 mm Tool Carrier Number of tools: 12 Tool system DIN 69 880: Ø30 mm MACHINE DETAILS Dimensions and Weights Height: 2,155 mm Base area (710): 4,140 mm x 2,155 mm Installation area (710) without material guide: 4,140 mm x 3,570 mm Weight (710): approx. 6,500–7,700 kg Three-phase current: 400 V, 50/60 Hz Connected load: 24 to 83 kVA Main fuse in supply line: 35 to 125 A EQUIPMENT Milling spindle set 6-position tool changer HKS-50B KM40 Material unloading device Workpiece handling WHU201 / WHW80/700 Chip conveyor: hinged belt Discharge height 1,250 mm Coolant fine filtration hydrostatic paper band filter Fedpfx Aajwxw Upsqjgb Vacuum rotation filter W-UAT-106A MMS system LUBRIX 750

Kondisi: bekas, Tahun pembuatan: 1990, Turning diameter 60 mm Turning length 200 mm Number of slides Total power requirement 20 kW Machine weight approx. t Space requirements approx. m Fgodpjt Hw Atjfx Aaqsb Spindle bore 30 mm, Control system INDEX C 200, Spindle speed 7,500 rpm, rear-side machining, 3-jaw chuck, driven tools, workpiece loader WHU 80

Kondisi: bekas, Tahun pembuatan: 1998, Swing diameter: 200 mm Turning length: 400 mm Control: SIEMENS SINUMERIC 840 C Total power requirement: 40 kW Machine weight: approx. 6,500 kg Space requirement: approx. m INDEX CNC Lathe with 2 turrets, bar loading magazine, workpiece handling system, and SIEMENS CNC control type 840 C Type G 200, year of manufacture: 1998 # 810 728 _____ Bar capacity for bar machining: approx. 42 mm Workpiece swing diameter: approx. 400 mm Turning diameter for chuck work: 200 mm Turning length / distance between centers: approx. 400 mm Turret slide travels Z1 (longitudinal) / X1 (cross): 400 / 120 mm Turret slide travels Z2 (longitudinal) / X2 (cross): 400 / 105 mm Feed force for Z/X axes: 15 Nm Rapid traverse speed of tool carriers 1 and 2: 22.5 m/min Turret tool stations / max. speed: 14 x VDI 30 / 6,000 rpm Spindle speeds / driven tool speeds up to max.: 7,000 rpm Fodpfx Ast Hw Rkeaqegb Max. spindle torque: 95 Nm Spindle drive / driven tool drive: 20 / 5.5 kW Total drive power: approx. 40 kW - 400 V - 50 Hz Weight: approx. 6,500 kg Accessories / Special equipment: • SIEMENS CNC 7-axis path control type SINUMERIC 840 C for the following axes: Turret 1 and Turret 2, C-axis, counter spindle axis and C-axis for the counter spindle, and workpiece handling type WHU with 2 linear axes and all standard options, flexible hand control device • C-axis for the main spindle with automatic spindle indexing and positioning system • 1 counter spindle with drive and C-axis, travel approx. 300 mm • INDEX bar loading magazine type MBL for bars up to 3 m length • Hydraulic chucking system on main and counter spindle • 2 x tool turrets with 14 stations for VDI 30 tool holders and 14 powered tool stations for milling and drilling operations, various tool holders, drill breakage control in the chuck area, ideal for cross drilling (!) • Workpiece handling system type WHU with linear gripper but without stacking system • Mobile chip conveyor with coolant system, sliding door, fire extinguishing system • Powered angle tools, approx. 20 pcs. total, etc. Condition: Good to very good – can be demonstrated under power Delivery: Ex stock – as inspected Payment: Net – payment due upon receipt of invoice.

Kondisi: bekas, Tahun pembuatan: 1995, Here is the English technical translation optimized for platforms like Machineseeker and TruckScout24: INDEX (Germany) CNC Slant-Bed Lathe with Turret, Tailstock, and INDEX CNC Control C 200-4 (SIEMENS) Model: G 300 Year: 1995 S/N: 5000 65 Technical Data: Fodpfot Hw Susx Aaqegb - Max. Turning Diameter (with chuck): 300 mm - Spindle Bore: approx. 90 mm - Max. Workpiece Swing Diameter: approx. 400 (max. 590) mm - Max. Turning Length / Centre Distance: approx. 710 mm - Turret Slide Travel (Z axis / longitudinal): 710 mm - Turret Slide Travel (X axis / cross): 140 mm - Rapid Traverse Speed Tool Carrier: 20 m/min - Turret with 12 tool positions for DIN 30 tool holders (approx. 40 different holders included as accessories) - Feed Force X/Z Axis: 8/13 kN - Stepless Spindle Speeds: up to 5,000 rpm - Max. Spindle Torque at 100% ED: 275 Nm - Spindle/Tool Drive Power: approx. 28 kW - Total Power Requirement: approx. 40 kW, 400 V, 50 Hz - Machine Weight: approx. 6,000 kg Accessories / Special Features: • SIEMENS CNC 3-Axis Path Control Type SINUMERIC 840 C or INDEX C 200-4 for the following axes: Turret 1 = X/Z as well as C-axis (spindle orientation). The control panel is mounted left and can be swiveled. • Alignment and indexing device for the main spindle • Forkhardt KFD-HS 250 hydraulic 3-jaw chuck fitted, with numerous jaws, max. speed 5,000 rpm • INDEX turret with 12 tool positions for DIN 30 tooling; approx. 40 additional tool holders included as accessories. Turret stations are prepared for driven tools, drive via the indexing device motor. • Hydraulic tailstock with eccentricity correction, quill 60 mm, operable via footswitch • KNOLL mobile chip conveyor with coolant facility and high-pressure pump • Front sliding door, otherwise complete enclosure. Oil skimmer This machine is ideal for shaft machining as well as for chuck workpieces. Very robust construction! (Please let me know if you need adaptations for other platform requirements or an export summary.)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, jumlah spindel: 6, Diameter batang (maks.): 22 mm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, 6 spindel Tekanan tinggi 80 bar 1 unit perangkat poligon Fedpfxsxuiqxe Aaqjgb Pengambilan bagian dapat dilakukan dengan unit eksternal IEMCA Sir-MS 22 – majalah pengumpan

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, jam operasional: 34.044 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 270240, jumlah spindel: 6, Diameter batang (maks.): 22 mm, panjang batang: 3.000 mm, diameter spindel: 40 mm, RINCIAN TEKNIS Jumlah spindel: 6 Fedpfx Aow T Rygsaqegb Diameter tembus spindel: 40 mm Diameter batang: 22 mm Panjang pengumpan batang: 4,70 m Panjang batang: 3,0 m RINCIAN MESIN Tegangan nominal: 400 V Daya nominal: 60 kW Daya terpasang: 71 kVA Pengaman maksimum: 125 A Tegangan jaringan: 400 V Frekuensi listrik: 50 Hz Tegangan kontrol: 24 V DC Waktu menyala: 50.134 jam Hidrolik aktif: 43.972 jam Waktu operasi: 38.809 jam Produksi: 34.044 jam PERLENGKAPAN - Seluruh suplai energi untuk keenam spindel utama diganti pada April 2025 - Single-NCU tanpa PCU - Pengumpan batang Iemca SIR MS22 P 33 (tahun pembuatan: 2015)

Kondisi: bekas, Tahun pembuatan: 2002, Max. turning diameter: 420 mm Turning length: 1,250 mm CNC Control: INDEX, C 200-4 D Swing diameter: 630 mm Travel X1: 320 mm Travel Z1: 1,250 mm Travel X2: 170 mm Travel Z2: 1,250 mm Travel X3: 320 mm Travel Z3: 1,250 mm Max. main spindle speed: 3,000 rpm Main spindle drive: 53 kW Spindle bore: 102 mm Spindle nose: DIN 55026 size 11 Fgodpst U R Hzefx Aaqob Spindle torque: 675 Nm Counter spindle - max. spindle speed: 3,000 rpm Counter spindle drive: 53 kW Counter spindle - spindle bore: 102 mm Counter spindle - spindle nose: DIN 55026 size 11 Counter spindle - torque: 675 Nm Counter spindle travel: 1,250 mm Feed force X1: 14,000 N / Z1: 14,000 N Rapid traverse X1: 20 m/min / Z1: 40 m/min Feed force X2: 8,600 N / Z2: 14,000 N Rapid traverse X2: 20 m/min / Z2: 40 m/min Feed force X3: 14,000 N / Z3: 14,000 N Rapid traverse X3: 20 m/min / Z3: 40 m/min Number of turret positions, Turret 1 = 12 Number of turret positions, Turret 2 = 10 Number of turret positions, Turret 3 = 12 Number of driven tool stations: 12 / 10 / 12 Max. driven tool speed: 6,000 rpm Torque (driven tools): 36 / 21 / 36 Nm Tool shank DIN 69880 Tool holder Ø 40 x 63 mm Total connected load: 120 kW Machine weight approx.: 19 t Machine dimensions (L x W x H): 5.77 x 2.47 x 2.62 m Accessories: - HAINBUCH segmented collet chuck on main spindle - HAINBUCH collet chuck, SPANNTOP SP on counter spindle - Various tool holders (including for driven tools) - Chip conveyor - Coolant system Note: All three tool turrets are prepared for through-tool coolant (IKZ), however, the high-pressure system is not included with the machine.

Kondisi: bekas, Tahun pembuatan: 1998, Number of spindles: 6 Spindle bore: 27 mm Turning length: 59 mm Hexagonal material: 24 mm Square material: 18 mm Cross slide travel: 36 mm Longitudinal slide travel: 85 mm Spindle speeds: 366 - 5,020 rpm Torque: 95 Nm Control: INDEX Total power requirement: 20 kW Fjdpsvh Naqsfx Aaqegb - 6 cross slides - 6 longitudinal slides - Polygon machining attachment - Thread cutting device - Hydraulic pick-off device - Workpiece discharge conveyor - Bar loading magazine manufactured by PIETRO CUCCHI, type AN-BN Accessories: various tool holders, various collets, chip conveyor, coolant system

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, jumlah spindel: 2, produsen pengendali: Siemens, model controller: 840D Solution-Line, Comprehensively equipped turning and milling center with main and counter spindle! TECHNICAL DETAILS Spindles Main spindle: D65 Counter spindle: D65 Tool Carriers Tool carrier 1: Motorized milling spindle, tool system HSK A40 2 × 3 fixed tool stations: VDI25 on WT1 XYB Tool carrier 2: Motorized milling spindle, tool system HSK A40 2 × 3 fixed tool stations: VDI25 on WT2 XYB Cooling Systems Interface: Cooling water for machine cooling Cooling unit: Spindle and electrical cabinet cooling Coolant through main spindle: available Coolant through counter spindle: available 8 bar coolant pump: on cleaning system Medium/high-pressure pump 20 bar: on cleaning system High-pressure pump emulsion: 16 l/min High-pressure pump oil: 33 l/min, max. 80 bar Fine coolant filtration: Compact band filter type KF150 Filter fleece type: PN 100/100-540 Clean water tank: 1,500 × 1,010 × 600 mm (approx. 900 l capacity) 5-axis machine equipment: available Control: Siemens 840D Solution-Line Fgedpfjwylz Tjx Aaqjb EQUIPMENT Tool changer Electronic shaft for spindles and drive units Main spindle expansion stages Stop device incl. coolant through MSP with solenoid valve Counter spindle expansion stages Stop device incl. coolant through CSP with solenoid valve Accuracy package Portal take-off device Finished parts conveyor belt 1,250 mm hinged belt chip conveyor with lift pump Chip discharge right side Coolant supply and fine filtration INDEX LMS 3,200 SBL bar loading magazine Boring direction for SBL Various tool holders (static and driven) Various sleeves for the bar loading magazine

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 510864, panjang pembubutan: 200 mm, CNC turning machine INDEX G200 Completely overhauled: 2017 Machine number: 510864 Max. turning length: 200 mm Fsdpsulhinefx Aaqsgb Bar feeder INDEX MBL Main spindle Collet chuck through-hole: 42 mm Spindle diameter at front bearing: 85 mm Spindle nose ISO702/1: 5 Chuck diameter: 140/160 mm Max. nominal turning diameter: 200 mm Max. swing diameter: 420 mm Power Pmax 100%: 7.5/13/20 kW Torque Mdmax 100%: 35/61/95 Nm Spindle speed: 6300 rpm Counter spindle Collet chuck through-hole: 42 mm Spindle diameter at front bearing: 85 mm Spindle nose ISO702/1: 5 Chuck diameter: 140/160 mm Power Pmax 100%: 7.5/13 kW Torque Mdmax 100%: 35/61 Nm Spindle speed: 6300 rpm Min. distance collet: 15 mm Longitudinal travel: 445 mm Rapid traverse: 22.5 m/min Cross slide 1 XZ (top) XZ: 120 x 400 mm Feed force: 5000 N Cross slide 2 (bottom) XZ: 105 x 400 mm Feed force: 5000 N Further information available on request!

Kondisi: sangat baik (bekas), Perfekt erhaltener sechsspindliger INDEX MS 25 Mehrspindel-Drehautomat mit jeweils sechs Quer- und Längsführungen für Werkzeuge. Fodpfeqhkukjx Aaqsgb Der Preis ist verhandelbar und richtet sich nach dem gewählten Zusatzequipment: Spannzangen, Werkzeuge, Späneförderer usw. Die Maschine befindet sich noch im Produktionseinsatz. Besichtigung nach Absprache möglich.

Kondisi: sangat baik (bekas), Index MS42C Bar guide HBF Fgedsfdr R Uspfx Aaqeb Oil distributor Flaps with clamping screws

Kondisi: bekas, Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 500358, panjang pembubutan: 1.250 mm, diameter pembubutan: 300 mm, daya motor spindle: 43 W, kecepatan spindel (maks.): 5.000 rpm, lubang spindel: 65 mm, INDEX G300L with Promot gantry loader. The machine is still in production and powered on. The Promot loader features 2 rotary transfer conveyors, each with approximately 30 pallet positions. The machine is equipped with high-pressure coolant system (40 bar), paper band filter, and tool changer. Further information available on request via email. Fgsdpfx Aeu Nmq Hoaqsb

Kondisi: bekas, Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 800 mm, diameter pembubutan: 280 mm, lubang spindel: 65 mm, jarak pergerakan sumbu X: 310 mm, jarak gerak sumbu Z: 870 mm, daya motor spindle: 22.000 W, kecepatan rotasi (maks.): 4.000 rpm, tinggi total: 2.200 mm, panjang total: 4.100 mm, lebar total: 2.000 mm, berat keseluruhan: 4.600 kg, diameter ayun di atas peluncur melintang: 400 mm, diameter luar chuck: 315 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Kami dengan senang hati siap melayani pertanyaan Anda melalui telepon. Fgsdpfx Aow Nn Elsaqob

Kondisi: sangat baik (bekas), Tahun pembuatan: 1990, 1 x multi-spindle automatic lathe Manufacturer: Index Model: MS 25 Year of manufacture: 1990 Including bar feeder Iemca PRA 40/33 P Extensive range of accessories included. Fjdpfx Aaeu Hgdujqegb The machine can be inspected under power.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 720052, panjang pembubutan: 600 mm, diameter pembubutan: 140 mm, saluran batang: 65 mm, model controller: Siemens 840 D PowerLine, jarak antara spindel: 615 mm, tech-details_001 Fgodpfx Aasxg Im Aeqeb

Kondisi: bekas, TECHNICAL SPECIFICATIONS - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Min. C-axis resolution: 0.001° SUB SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Min. C-axis resolution: 0.001° - Travel: 390 / 600 mm TURNING-MILLING SPINDLE - X travel: 350 mm - Y travel: ±80 mm - B-axis stroke: 270° Fodpfxjv Ig Avs Aaqegb - Min. B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 LOWER TURNING AND MILLING SPINDLE - Y travel: ±80 mm - B-axis stroke: 270° - Min. B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 TOOL CHANGER - Tool changer type: Bras charger - Number of magazine tools: 80 - Tool change time: 4.5 sec ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 68 kW WEIGHT AND DIMENSIONS - Machine height: 2,500 mm - Machine weight: 11,000 kg MACHINE HOURS - Spindle hours: 19,781 h - Turning-milling spindle hours: 9,713 h EQUIPMENT - Control: Siemens Sinumerik 840D SL - Coolant tank * with high-pressure pump * with paper filter * internal coolant supply (IKZ) - Chip conveyor - Spindle cooling - Parts removal

Kondisi: bekas, TECHNICAL DATA - Maximum diameter: 26 mm - Maximum feed length: 125 mm - Spindle speed: 366 – 5,020 rpm - Number of spindles: 6 - Central block stroke with taper: 85 mm Fgedpfx Aaouhanasqob Hydraulic option: 200 mm - Cross-slide stroke with taper: 36 mm Hydraulic option: 56 mm - Dimensions: 5,728 x 1,080 x 1,816 mm - Weight: 5,200 kg EQUIPMENT - Counter spindle - Base + drum

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 6 - Max. diameter: 32 mm - Spindle speed: 6,300 rpm - Slide unit 1.1: X and Z axes CNC-controlled - Slide unit 1.2: X and Z axes CNC-controlled - Slide unit 2.1: X and Z axes CNC-controlled - Slide unit 2.2: X and Z axes CNC-controlled - Slide unit 3.1: X and Z axes CNC-controlled - Slide unit 3.2: X and Z axes CNC-controlled - Slide unit 4.1: X and Z axes CNC-controlled - Slide unit 4.2: X and Z axes CNC-controlled - Slide unit 5.1: X and Z axes CNC-controlled - Slide unit 5.2: X and Z axes CNC-controlled - Slide unit 6.1: X and Z axes CNC-controlled with counter spindle - Slide unit 6.2: X and Z axes CNC-controlled EQUIPMENT - CNC control: SIEMENS 840D - Counter spindle - Polygon turning unit: Slide unit 5.1 - Bar feeder: IEMCA SIR MS32/33 P - Coolant tank: KNOLL * with high-pressure pump - Chip conveyor: KNOLL - Cooling unit - Parts removal Fodpfx Aouhatpsaqsgb - Parts ejector - Fire protection system: KRAFT UND BAUER * Note: Functionality not guaranteed. Must be checked by a qualified company commissioned by the buyer.

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 6, independently controlled - Bar capacity: 32 mm - Max. spindle speed: 6,300 rpm - Machine equipped with 32 CNC axes - Slide unit 1.1: X and Z axes CNC-controlled - Slide unit 1.2: fixed X axis, Z axis CNC-controlled - Slide unit 2.1: fixed X axis, Z axis CNC-controlled - Slide unit 2.2: X and Z axes CNC-controlled - Slide unit 3.1: X and Z axes CNC-controlled - Slide unit 3.2: fixed X axis, Z axis CNC-controlled - Slide unit 4.1: X and Z axes CNC-controlled - Slide unit 4.2: fixed X axis, Z axis CNC-controlled - Slide unit 5.1: fixed X axis, Z axis CNC-controlled - Slide unit 5.2: X and Z axes CNC-controlled - Slide unit 6.1: X and Z axes CNC-controlled - Slide unit 6.2: X and Z axes CNC-controlled - Counter spindle at position 6.1 EQUIPMENT / ACCESSORIES - Control: INDEX C200-4 (Siemens SINUMERIK 840D) Fgedpfx Aaeuhaxloqjb - Simple NCU - Bar feeder IEMCA SIR MS32/33/P - Central oil supply with high-pressure pump - Chip conveyor KNOLL - Workpiece evacuation with conveyor at position 6 - Cross drilling units at positions 3.1 and 4.1

Kondisi: bekas, Mesin bubut otomatis satu spindle INDEX B60 Fgedpfx Aasxt U Igjqob

Kondisi: bekas, Mesin bubut otomatis satu spindel INDEX B60 Fsdpfxjxt U Nkj Aaqegb