Beli International 1486 bekas (8.620)

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), en-001 Fedpfx Alsyzkifsyogf

Kondisi: bekas, Reaktor vertikal Bibby bekas kapasitas sekitar 400 liter dari stainless steel 316. Unit memiliki kepala atas mangkuk baut dan kepala bawah mangkuk las. Diameter sekitar 750mm dengan sisi lurus 950mm. Tekanan kerja internal dirancang 3,46 bar/vakum penuh pada 100°C. Jaket eksternal dari stainless steel 316 dengan tekanan kerja 6,6 bar/vakum penuh pada 100°C. Dilengkapi agitator stainless steel atas dengan penggerak Lightnin model LS25V. Unit dipasang pada lug penyangga samping. Fodoykn Rwspfx Alyegf

Tahun pembuatan: 1981, Kondisi: baik (bekas), Manufacturer: National Broach Model: GHC 12" Year of manufacture: 1981 Fgjdpfx Ajhad Avslyof Max. workpiece diameter: 355 mm Min./max. pitch circle diameter: 100–152 mm Max. face width: 63.5 mm Min./max. module: 1.25–6.35 mm Weight: 3.4 t Operation: Internal gear honing

Tahun pembuatan: 1960, Kondisi: bekas, Max. pulling force: 20,000 kg Max. stroke: 1,250 mm Max. cutting speed: from 1 m/min to 7 m/min Max. return speed: from 5 m/min to 25 m/min Fjdpfx Aeui Sbjlyegf Max. workpiece diameter: approx. 140 mm Max. tool diameter: approx. 50 mm Broaching stations: 2 units The machine is equipped with a 2-station rotary indexing table. The machine has an automatic tool feeder and is designed for manual series production. Tool locking within the pulling bridge and in the tool feeder is carried out via a spring-actuated mechanism (pulling head according to DIN 1417).

Tahun pembuatan: 1959, Kondisi: bekas, Max. Zugkraft: 16 t Max. Hub: 1250 mm Schnittgeschwindigkeit: 5.6 m/min Rücklaufgeschwindigkeit: 30 m/min Fedpfx Als Rwa Uoysgf

Tahun pembuatan: 1980, Kondisi: bekas, Maximum pulling force: 10 t Maximum stroke: 1250 mm Fjdpfx Alecdtpljyogf Maximum cutting speed: 10 m/min Maximum return speed: 27 m/min Maximum workpiece diameter: 320 mm Broaching stations: 3 units Weight: 4.8 t automatic tool feeder hydraulic pull head and end piece holder locking automatic loading device for workpieces up to 100 mm diameter magnetic chip conveyor

Tahun pembuatan: 1956, Kondisi: bekas, nomor mesin/kendaraan: 1413, Manufacturer: Karl Klink Model: RISZ 10x 1200 Year of manufacture: 1956 Weight: 3,450 kg Machine No.: 1413 General Information / Technical Data: Used vertical hydraulic internal broaching machine with up to 3 broaching positions, in operational condition. Pulling force: 13,000 kg (maximum) Broaching length: 1,200 mm Number of broaching positions: 3 Distance between broaching positions: 100 mm Clamping diameter of pull head: Ø 85 mm Clear width between cylinders: max. 390 mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to max. 25 m/min Machine footprint (W x D x H): approx. 1,150 x 1,500 x 3,725 mm (with tool feeder extended) Power supply / Connected load: 380V 50Hz / 7.5 kW Fgsdpfx Asdbmgmjlysf Accessories / Special features: The machine's crossbeam is equipped with 3 broaching tool holders; the workpiece table has 1 broaching position (modifiable). The tool clamping system and tool feeder are designed for spring-mechanical locking (DIN 1415). The machine is fitted with an automatic tool feeder; the existing feeder can currently accommodate only 1 tool (central broaching position). Integrated coolant system suitable for cutting oil. Notes: The machine is in age-appropriate good condition and ready for immediate use. Designed for manual operation in medium batch production. It features an automatic process cycle. For optimal use, a machine pit or alternatively a platform is required. Pull heads, tool holders, and tools available upon request. The machine can be inspected under power at our warehouse.

Tahun pembuatan: 1951, Kondisi: baik (bekas), nomor mesin/kendaraan: 1133, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1951 Weight: approx. 2,750 kg Machine No.: 1133 General information / technical data: Hydraulic horizontal broaching machine in good operational condition Broaching stroke: 1,500 mm Broaching stations: 1 unit Pulling force: 10,000 kg at 3 m/min (5,000 kg at 7 m/min) Broaching tool clamping: Universal pull head for flat shanks up to 26 mm wide Through bore in clamping table: Ø 105 mm Workpiece diameter: max. 430 mm (limited by oil and chip tray) Cutting speed: Hydraulically stepless adjustable from 2 m/min to 7 m/min Return speed: Hydraulically stepless adjustable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 6,200 mm x 700 mm x 1,900 mm (excluding working area) Power supply / connected load: 380 Volt 50 Hz / 8 kW Hydraulic motor: 7.5 kW Accessories / special features: Fedpjdcdrpjfx Alyegf • The machine is equipped with a universal pull head for flat shanks • The machine has an integrated coolant/lubricant system • The machine has an oil and chip tray with a tool feeder carriage Remarks: The machine is ideal for the production of keyways and profiles. The machine runs smoothly and is clean in the areas of the guides and the cylinder. Broaching tools and arbors can be supplied on request. The machine is available for inspection and demonstration under power in our warehouse.

Tahun pembuatan: 1980, Kondisi: baik (bekas), nomor mesin/kendaraan: 03.2123, Manufacturer: Arthur Klink Model: RISZ 25x 2500 x 500 Year of manufacture: 1980 Machine No.: 03.2123 General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations, in very good condition Tensile force: 25,000 kg Broaching length: 2,000 mm Number of broaching stations: 3 Distance between broaching stations: 160 mm Chuck diameter for broaching heads: 3 x Ø 100 mm Clear width between cylinders (nominal size): 500 mm Clear width between cylinders (measured): max. 590 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely variable from 5 up to max. 25 m/min Fgedpfx Alsdffzfjyjf Machine dimensions (W x D x H): approx. 3,400 mm x 3,400 mm x 6,900 mm (without pit) Power supply / Connected load: 380 Volt 50 Hz / 22 kW Accessories / Special Features: Currently, the machine is without a workpiece table. A sliding workpiece table with a special external broaching clamping device was previously installed (the workpiece sliding table is modifiable). The tool clamping system is equipped with hydraulic locking both in the pull bridge and the feed unit. The machine has a coolant system with integrated chip conveyor. Remarks: The machine is in very good condition and still retains its original paintwork. It is designed for use in series production and, for optimal operation, a foundation (pit) is ideally required. Broaching heads and ejector needles are available on request. The machine can be inspected at our warehouse.

Tahun pembuatan: 1958, Kondisi: bekas, nomor mesin/kendaraan: 1545, en-001 Fedoda Ugispfx Alyjgf

Tahun pembuatan: 1994, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 04.2398, Manufacturer: Arthur Klink Model: RIW 10 x 1500 x 500 Machine No.: 04.2398 Year of manufacture: complete overhaul by manufacturer in 1994 Weight: 3,700 kg Pulling force: 10,000 kg (100 kN) Max. stroke: 1,500 mm Fsdpfx Asgyd T Eelyogf Max. workpiece diameter: Ø 500 mm Broaching speeds: infinitely adjustable from 1 m/min to 6 m/min Return speed: steplessly adjustable up to 20 m/min Electrical connection: 400V / 50Hz

Tahun pembuatan: 1964, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2016, Used vertical hydraulic internal broaching machine with 3 broaching stations Tensile force: 16,000 kg Broaching length: 1,250 mm Broaching stations: 3 units Distance between stations: 380 mm Draw head mounting diameter: 3 x Ø ___mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 up to max. 25 m/min Machine footprint (W x D x H): approx. 2,200 x 1,550 x 4,200 mm (without pit) Fodet Dv I Aopfx Alyogf Power supply / Connected load: 380 Volt, 50 Hz Accessories / Special Equipment: The machine is equipped with a workpiece table featuring 3 bores for the 3 broaching stations. The tooling clamping system is designed for spring-actuated locking in the pull bridge and hydraulic-mechanical clamping in the feed unit. The machine was retrofitted electrically (Siemens S7 PLC) and mechanically in 2004. An integrated coolant system is included. Remarks: The machine is designed for series production use; for optimum utilization, a foundation (pit) is ideally required or optionally a raised platform. Draw heads and extractor needles are available upon request. The machine can be inspected at our warehouse.

Tahun pembuatan: 1960, Kondisi: belum diuji (bekas), Forst RF 20x2000 Internal Broaching Machine -WKG 189- Specifications: Fgedpjhu E Egsfx Alyjf Manufacturer: Forst Type: RF 20x2000 Year of manufacture: 1959 Max. drawing force: 20 t Max. stroke: 2000 mm Max. cutting speed: 5.6 m/min Max. return speed: 30 m/min Max. workpiece diameter: Ø 300 mm Max. tool diameter: Ø 90 mm Weight: 3.5 t Note: without tray

Kondisi: belum diuji (bekas), Forst RF 16 Internal Broaching Machine -WKG 1371- Fsdpfx Alohu E N Djyogf Technical Specifications: Manufacturer: Forst Model: RF 16 Maximum Pulling Force: 16 t Maximum Stroke: 1200 mm Maximum Cutting Speed: 5.6 m/min Maximum Workpiece Diameter: Ø 700 mm Maximum Tool Diameter: Ø 120 mm Workpiece Fixture Seat: Ø 70 mm Note: Control valve missing

Tahun pembuatan: 1960, Kondisi: diremajakan ulang (bekas), nomor mesin/kendaraan: 1732, Vertical internal broaching machine with indexing table from Karl Klink Type: RSI6DT Machine No.: 1732 Fjdegyd Svepfx Alysgf Year of manufacture: 1960 Weight: 3.2 tons Broaching force: 6,000 kg With indexing table (2 stations) Power supply: 380V / 50Hz Rated current: 15 A Connected load: 4 kW The machine has been fully overhauled and is therefore in very good condition.

Tahun pembuatan: 1964, Kondisi: diremajakan ulang (bekas), nomor mesin/kendaraan: 2041, Vertical internal broaching machine with index plate by Karl Klink Model: RSI8DT1 Machine no.: 2041 Year of manufacture: 1964 Weight: 3.2 t Broaching force: 8,000 kg With index plate (2 stations) Power supply: 380V / 50Hz Fsdegyd S Dspfx Alysgf Rated current: 25 A Connected load: 5.5 kW The machine has been completely overhauled and is thus in very good condition.

Tahun pembuatan: 1990, Kondisi: sangat baik (bekas), Manufacturer: Arthur Klink Year of manufacture: 1990 Model: RISZ 16 x 1250 x 400 / HG Technical specifications: Vertical internal broaching machine in very good technical condition Pulling force: 16,000 kg Broaching speed: up to 27.5 m/min, steplessly adjustable Fgjdpfx Aolpadyelyof Return speed: up to 34 m/min, steplessly adjustable Maximum stroke: 1,250 mm Broaching stations: 4 units Equipment: - Automatic tool changer - Automatic workpiece feed (workpiece-specific) - Hydraulic tool clamping device (workpiece-specific) Remarks: High-performance production broaching machine for large-scale series production with high cutting speed!

Tahun pembuatan: 1965, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2549, General / Technical Data: Used horizontal hydraulic internal broaching machine in age-appropriate good condition with heavy-duty manual tool feeder. Broach stroke: 2,000 mm Pulling force: 25,000 kg (250 kN) Tool holder on pull bridge: Ø 105 mm cylindrical Pass-through bore in clamping table: Ø 125 mm Clamping surface (workpiece area): 440 mm x 440 mm Maximum workpiece diameter: approx. 800 mm (limited by the tool tray of the tool feeder) Cutting speed: hydraulically infinitely variable from 1.5 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Oil capacity: hydraulics approx. 450 L / coolant approx. 100 L Machine footprint: (W x D x H) approx. 8,400 mm x 1,350 mm x 1,800 mm (excluding workspace) Power supply: 380 Volt, 50 Hz Connected load: 19 kW Fodpotuuvzsfx Alyegf Equipment: • Mechanical-hydraulic control for broaching and return stroke • Integrated coolant/lubricant system • Manually operated tool traverse • The broaching slide with pull head holder is flat-guided on both sides • Adjustable pull force limiter • Pull force display Accessories: • 1 universal pull head for flat shanks up to max. approx. 40 mm width • Dividing attachment (see pictures) • Various special holders and clamping devices • Machine documentation Remarks: The machine is suitable for manufacturing keyways with flat broaching tools as well as for profile broaching. Due to the rigid machine bed and robust tool feeder, the machine is very well suited for heavy-duty profile broaching tools. Machine is used and in a condition appropriate for its age. The machine is available for inspection at our warehouse. The machine has just been added to our inventory; it has not yet been technically or visually refurbished. Profile broaching pull heads are available on request, depending on DIN standard, size, and stock condition.

Tahun pembuatan: 1972, Kondisi: bekas, Maximum pulling force: 10 t Maximum stroke: 1250 mm Maximum cutting speed: 10 m/min Maximum return speed: 25 m/min Broaching stations: 3 units Passage width: 470 mm Station pitch: 125 mm Table: 400 x 400 mm Fgedocdtnhspfx Alyef Special features: Chip removal via permanent magnetic chip conveyor 1 hydraulic system, 1 working platform, electric hydraulic shank and end-piece clamping confirmation, automatic loading device

Kondisi: baru, Tahun pembuatan: 2024, jam operasional: 1 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1024JT05VL, diameter ulir metrik (min.): 3 mm, diameter ulir metrik (maks.): 16 mm, jangkauan kerja: 2.000 mm, berat keseluruhan: 19 kg, kecepatan rotasi (min.): 50 rpm, kecepatan rotasi (maks.): 500 rpm, kedalaman tenggorokan: 2.000 mm, tinggi meja: 870 mm, lebar meja: 800 mm, panjang meja: 600 mm, Perlengkapan: dokumentasi / manual, VOLUMEC JoyTap 3150 - Tapping Unit M3 - M16 / 50-500 RPM incl. automatic tool lubrication incl. VASTC control for JoyTap – Assisted control for tapping operations 1. NEW ALUMINIUM FRAME with EXCLUSIVE Volumec profile designed for greater rigidity and precision compared to other models 2. Improved articulated arm mechanics for smoother movement and increased power Fgedpfxsvr U Uno Alysf 3. NEW-GENERATION (G2) BRUSHLESS MOTOR offering unmatched performance and reliability 4. INTEGRATED CABLING that does not restrict movement 5. VASTC TOUCH PANEL, the most advanced device on the market for screwing and tapping tasks, updated with new features and programmable torque (Nm) 6. MULTI-DIRECTIONAL HEAD with automatic locking 0-90° for workpiece alignment 7. QUICK-CHANGE COUPLING SPINDLE TAPPING: • AUTOMATIC TAPPING (adjustment of pitch – depth – speed – torque Nm for tool protection) • TAPPING with PROGRAMMABLE chip breaking • MANUAL TAPPING (preset speed – torque (Nm) for tool protection) • THREAD COUNTING capability • PROGRAM MEMORY with password protection • Easy PROGRAMMING via INTEGRATED INTERFACE • PROGRAM MEMORY for recurring operations • CONSTANT SPEED AND TORQUE during tapping thanks to rotary encoder WORK TABLE: Size: 800x600 Height: 870 30 mm base made from machined steel, T-slots in the inner compartment

Kondisi: bekas, Tahun pembuatan: 2003, innenschleifmaschine-01 Fgjdpfx Ajuxft Selyef

Kondisi: bekas, Internal diameter: 340/440 mm Fgodpfx Aled Ih Dxeyef Grinding depth: 99999 mm Grinding diameter: 250, 350, 450 mm Grinding length: 600 mm Centre height: 125, 175, 225 mm Spindle bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Cross feed (in increments): 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swiveling: ±10° Table longitudinal movement: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight (chucked): 130 kg incl. clamping Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space requirement approx.: 3.1 x 2.0 m As a global leader in Kellenberger overhauls/retrofits, we deliver machines in as-new condition with warranty and can also provide service for your machines (Warranty: 12 months from delivery – for Germany and neighboring countries). Dedicated internal grinding machine with infinitely variable drive 0–100%. Now available in current color schemes!!! Standard centre height: 175 mm. Upgradeable to 225 mm. Fixed internal grinding spindle, belt tension via tension roller! z-axis reversal accuracy max. 0.01 mm! Geometrically overhauled and newly painted with: - New control cabinet - New workpiece spindle motor and controller with three-phase technology - 2-axis digital readout, resolution x-axis 0.5 µm Options: - Rotary encoder with digital readout in workpiece headstock - New heavy-duty internal grinding attachment, diameter 80 mm or 100 mm, height-adjustable - Increase of centre height to max. 225 mm Included: - Operating tools Further accessories on request. At present, the machine tool does not comply with the fundamental safety and protection requirements as defined in the BetrSichV 2015. Raising the necessary minimum protection level must be determined by a risk assessment in accordance with BetrSichV.

Kondisi: bekas, Tahun pembuatan: 2000, Diameter lubang 45 mm Langkah 1000 mm Mesin honing empat spindle yang disiapkan untuk honing laras senapan. Fjdsxddq Eepfx Alysgf Kisaran honing menurut pabrikan: Diameter 5-45 mm Panjang honing maksimum 750 mm Aksesori: Alat untuk diameter -10 mm -12,3 mm -13,3 mm -21,1 mm

Kondisi: bekas, Bore diameter 99999 mm Fedpfx Aljv Tqqujysgf Stroke 99999 mm Outreach 99999 mm Used, sold without warranty

Kondisi: bekas, Tahun pembuatan: 2010, Bore diameter 54 mm Stroke 99,999 mm Center height 9,999 mm Control FANUC CNC spherical and calotte honing machine Fgedpfxevk Nkuj Alysf