Beli International 574 bekas (9.111)

Tahun pembuatan: 1964, Kondisi: diremajakan ulang (bekas), nomor mesin/kendaraan: 2041, Vertical internal broaching machine with index plate by Karl Klink Model: RSI8DT1 Machine no.: 2041 Year of manufacture: 1964 Weight: 3.2 t Lodpfxegyd S Dj Aptjhh Broaching force: 8,000 kg With index plate (2 stations) Power supply: 380V / 50Hz Rated current: 25 A Connected load: 5.5 kW The machine has been completely overhauled and is thus in very good condition.

Tahun pembuatan: 1960, Kondisi: belum diuji (bekas), Forst RF 20x2000 Internal Broaching Machine -WKG 189- Specifications: Lodpfx Apshu E Egjtehh Manufacturer: Forst Type: RF 20x2000 Year of manufacture: 1959 Max. drawing force: 20 t Max. stroke: 2000 mm Max. cutting speed: 5.6 m/min Max. return speed: 30 m/min Max. workpiece diameter: Ø 300 mm Max. tool diameter: Ø 90 mm Weight: 3.5 t Note: without tray

Kondisi: belum diuji (bekas), Forst RF 16 Internal Broaching Machine -WKG 1371- Lhodehu E N Dspfx Aptjh Technical Specifications: Manufacturer: Forst Model: RF 16 Maximum Pulling Force: 16 t Maximum Stroke: 1200 mm Maximum Cutting Speed: 5.6 m/min Maximum Workpiece Diameter: Ø 700 mm Maximum Tool Diameter: Ø 120 mm Workpiece Fixture Seat: Ø 70 mm Note: Control valve missing

Tahun pembuatan: 1978, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 2751, General / Technical Data: Hydraulic Horizontal Internal Broaching Machine in technically good condition Manufacturer: Karl Klink Model: RIW 6.3 Machine No.: 2751 Year of manufacture: 1978 Weight: 2.3 t Ledpfx Ajiw Dlksptjhh Pulling force: 6.3 t Broaching speeds: hydraulically steplessly adjustable from 1 m/min to 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min to 25 m/min Maximum stroke: 1320 mm Maximum workpiece diameter: max. 420 mm Table opening: Ø 80 mm Dimensions (W x D x H): approx. 5,700 mm x 600 mm x 1,900 mm Power supply: 380 Volt / 50 Hz / 4 kW Accessories / Special Equipment: - Coolant / lubricant system - Without tool feeder - Oil and chip tray (approx. 2,000 mm) Note: The machine is ideally suited for the production of keyways. Upon request, broaching tools and arbors can also be supplied. The machine is powered up and ready for demonstration in our warehouse.

Tahun pembuatan: 1990, Kondisi: sangat baik (bekas), Manufacturer: Arthur Klink Year of manufacture: 1990 Model: RISZ 16 x 1250 x 400 / HG Technical specifications: Vertical internal broaching machine in very good technical condition Pulling force: 16,000 kg Broaching speed: up to 27.5 m/min, steplessly adjustable Return speed: up to 34 m/min, steplessly adjustable Maximum stroke: 1,250 mm Broaching stations: 4 units Equipment: - Automatic tool changer - Automatic workpiece feed (workpiece-specific) - Hydraulic tool clamping device (workpiece-specific) Lsdpjlpadyjfx Aptshh Remarks: High-performance production broaching machine for large-scale series production with high cutting speed!

Tahun pembuatan: 1965, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2549, General / Technical Data: Used horizontal hydraulic internal broaching machine in age-appropriate good condition with heavy-duty manual tool feeder. Broach stroke: 2,000 mm Pulling force: 25,000 kg (250 kN) Tool holder on pull bridge: Ø 105 mm cylindrical Pass-through bore in clamping table: Ø 125 mm Clamping surface (workpiece area): 440 mm x 440 mm Maximum workpiece diameter: approx. 800 mm (limited by the tool tray of the tool feeder) Cutting speed: hydraulically infinitely variable from 1.5 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Oil capacity: hydraulics approx. 450 L / coolant approx. 100 L Machine footprint: (W x D x H) approx. 8,400 mm x 1,350 mm x 1,800 mm (excluding workspace) Power supply: 380 Volt, 50 Hz Connected load: 19 kW Equipment: • Mechanical-hydraulic control for broaching and return stroke • Integrated coolant/lubricant system • Manually operated tool traverse • The broaching slide with pull head holder is flat-guided on both sides • Adjustable pull force limiter • Pull force display Accessories: • 1 universal pull head for flat shanks up to max. approx. 40 mm width • Dividing attachment (see pictures) • Various special holders and clamping devices • Machine documentation Lsdpetuuvzefx Aptshh Remarks: The machine is suitable for manufacturing keyways with flat broaching tools as well as for profile broaching. Due to the rigid machine bed and robust tool feeder, the machine is very well suited for heavy-duty profile broaching tools. Machine is used and in a condition appropriate for its age. The machine is available for inspection at our warehouse. The machine has just been added to our inventory; it has not yet been technically or visually refurbished. Profile broaching pull heads are available on request, depending on DIN standard, size, and stock condition.

Tahun pembuatan: 1972, Kondisi: bekas, Maximum pulling force: 10 t Maximum stroke: 1250 mm Maximum cutting speed: 10 m/min Maximum return speed: 25 m/min Lhsdpjcdtnhefx Aptsh Broaching stations: 3 units Passage width: 470 mm Station pitch: 125 mm Table: 400 x 400 mm Special features: Chip removal via permanent magnetic chip conveyor 1 hydraulic system, 1 working platform, electric hydraulic shank and end-piece clamping confirmation, automatic loading device

Kondisi: bekas, Tahun pembuatan: 1952, de-001 Lhedpfxeyn R Nwo Aptsh

Kondisi: bekas, Tahun pembuatan: 2003, innenschleifmaschine-01 Ledpfx Apeuxft Sstohh

Kondisi: bekas, Internal diameter: 340/440 mm Lhedpfx Apsd Ih Dxetjh Grinding depth: 99999 mm Grinding diameter: 250, 350, 450 mm Grinding length: 600 mm Centre height: 125, 175, 225 mm Spindle bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Cross feed (in increments): 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swiveling: ±10° Table longitudinal movement: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight (chucked): 130 kg incl. clamping Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space requirement approx.: 3.1 x 2.0 m As a global leader in Kellenberger overhauls/retrofits, we deliver machines in as-new condition with warranty and can also provide service for your machines (Warranty: 12 months from delivery – for Germany and neighboring countries). Dedicated internal grinding machine with infinitely variable drive 0–100%. Now available in current color schemes!!! Standard centre height: 175 mm. Upgradeable to 225 mm. Fixed internal grinding spindle, belt tension via tension roller! z-axis reversal accuracy max. 0.01 mm! Geometrically overhauled and newly painted with: - New control cabinet - New workpiece spindle motor and controller with three-phase technology - 2-axis digital readout, resolution x-axis 0.5 µm Options: - Rotary encoder with digital readout in workpiece headstock - New heavy-duty internal grinding attachment, diameter 80 mm or 100 mm, height-adjustable - Increase of centre height to max. 225 mm Included: - Operating tools Further accessories on request. At present, the machine tool does not comply with the fundamental safety and protection requirements as defined in the BetrSichV 2015. Raising the necessary minimum protection level must be determined by a risk assessment in accordance with BetrSichV.

Kondisi: bekas, Tahun pembuatan: 2000, Diameter lubang 45 mm Langkah 1000 mm Mesin honing empat spindle yang disiapkan untuk honing laras senapan. Kisaran honing menurut pabrikan: Diameter 5-45 mm Panjang honing maksimum 750 mm Aksesori: Alat untuk diameter -10 mm -12,3 mm -13,3 mm Ledpfxoxddq Eo Aptshh -21,1 mm

Kondisi: bekas, Bore diameter 99999 mm Stroke 99999 mm Ledpfxov Tqque Aptshh Outreach 99999 mm Used, sold without warranty

Kondisi: bekas, Tahun pembuatan: 2010, Bore diameter 54 mm Stroke 99,999 mm Center height 9,999 mm Control FANUC Lhsdpfx Apjvk Nkujtjh CNC spherical and calotte honing machine

Kondisi: sangat baik (bekas), de-001 Lhedpfsylbhxjx Aptoh

Kondisi: bekas, From insolvency sale: Rilco concrete vibrator 56 mm Ledpfx Aporkzt Ustshh untested

Kondisi: bekas, From insolvency: Converter with vibrating bottle Rilco 380 Volt Ljdpfx Aorkzt Heptohh 58mm bottle function-tested

Kondisi: belum diuji (bekas), From insolvency: Wacker FU 1.6 frequency converter 380 Volt 2x 3-pole bottle connections Untested, as no suitable vibrating poker is available Lhsdpjrkzt Ajfx Apteh

Kondisi: bekas, Hydraulic Pump Double Internal Gear Pump BOSCH REXROTH Type P2GH3/011 + GH3/013RE47 + 47U2-A502 Hydraulic pump for TRUMPF TC 500 R, Trumpf Original Spare Parts Kit No. 1737140. Double internal gear pump with hydraulic hoses. Suitable for machine: TRUMPF TC 500 R Trumpf spare part no.: 1737140 ES Hydraulic Pump Year of manufacture: NEW / unused in unopened original packaging Lhodpokpwu Hefx Aptsh The kit consists of the following Trumpf spare parts: - 0348394 Double internal gear pump BOSCH REXROTH P2GH3/011+GH3/013RE47+47U2-A502 - 0034257 Hydraulic hose 10.0 x 700 - 0105599 Hydraulic hose 12.0 x 730 Technical data hydraulic pump: Manufacturer: BOSCH REXROTH Type: P2GH3/011+GH3/013RE47+47U2-A502 Material no.: R900969031 Maximum operating pressure: 350 bar Maximum displacement volume: 16 cm³ Size: 2 Package dimensions (L x W x H): 540 x 400 x 300 mm Package weight: 22 kg NEW / unused in unopened original packaging, only opened for inventory purposes From stock, supplied by Trumpf in 2019 but not required.

Kondisi: bekas, Used control panel NAGEL MSU2 Ljdpfx Ajv Twgijptjhh Hole diameter 99,999 mm Stroke 99,999 mm Reach 99,999 mm Without warranty

Kondisi: bekas, Reaktor vertikal Bibby bekas kapasitas sekitar 400 liter dari stainless steel 316. Unit memiliki kepala atas mangkuk baut dan kepala bawah mangkuk las. Diameter sekitar 750mm dengan sisi lurus 950mm. Tekanan kerja internal dirancang 3,46 bar/vakum penuh pada 100°C. Jaket eksternal dari stainless steel 316 dengan tekanan kerja 6,6 bar/vakum penuh pada 100°C. Dilengkapi agitator stainless steel atas dengan penggerak Lightnin model LS25V. Unit dipasang pada lug penyangga samping. Ledpeykn Rwjfx Aptohh

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1983, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 8151, diameter meja putar: 800 mm, tinggi penggerindaan: 750 mm, berat benda kerja (maks.): 800 kg, tinggi total: 4.100 mm, lebar total: 26.650 mm, panjang total: 44.000 mm, panjang umpan sumbu Y: 750 mm, panjang umpan sumbu Z: 550 mm, berat keseluruhan: 13.000 kg, diameter roda gerinda: 400 mm, diameter cakram: 400 mm, kecepatan spindle penggilingan: 1.460 rpm, diameter penggilingan: 800 mm, lebar kabinet kontrol: 650 mm, jenis arus masuk: Arus searah (DC), tinggi kabinet kontrol: 1.900 mm, panjang kabinet kontrol: 1.800 mm, kecepatan spindel (maks.): 1.800 rpm, kecepatan spindel (min.): 1.460 rpm, beban meja: 900 kg, diameter benda kerja (maks.): 850 mm, lebar roda gerinda: 60 mm, lebar meja: 1.240 mm, daya: 35 kW (47,59 hp), gerak cepat sumbu X: 2 m/menit, pergeseran cepat sumbu Y: 100 m/menit, pergerakan cepat sumbu Z: 2 m/menit, kebutuhan tinggi: 4.100 mm, persyaratan ruang panjang: 5.100 mm, lebar yang dibutuhkan: 2.655 mm, Good day, For sale is a well-maintained and fully functional Sielemann cylindrical grinding machine suitable for surface grinding, internal grinding, and external grinding applications. The machine features a swiveling column with three different grinding heads, each designed for the respective application area. A complete set of machine documentation is available and can be presented during inspection. The Sielemann offered here has been regularly serviced and maintained. The following components have recently been renewed: - 3 new counterbalance cylinders - 1 new hydraulic power unit (complete) - New way covers - Rotary table assembly overhauled Technical Data: Machine length: 4,400 mm Machine width: 2,655 mm Machine height: 4,100 mm Machine weight: 13,000 kg Control cabinet width: 650 mm Control cabinet height: 1,900 mm Control cabinet length: 1,800 mm Grinding table diameter: 800 mm Grinding table load capacity: 800 kg Grinding table drive power: 0.21 – 14.5 kW Grinding table speed: 100 rpm (both directions) Grinding table workpiece clamping: magnetic chuck incl. T-slots Z-axis travel (grinding table): 550 mm Maximum grinding height (Y): 750 mm Lubrication pump machine bed: 0.18 kW Lubrication pump column: 0.1 kW Leakage oil pump: 0.065 kW Hydraulic pump: 1.5 kW 1) External Cylindrical Grinding Head Spindle drive power: 11 kW Spindle speed: 1,450 rpm Grinding wheel: 400 x 50 mm Tapered grinding spindle mount: D = 65 mm Taper pitch: 1:5 Feed rate (Y): 100 mm/min 2) Internal Cylindrical Grinding Head Spindle drive power: 5.5 kW Grinding wheel: variable Feed rate (Y): 100 mm/min 3) Surface/Cylindrical Grinding Head Spindle drive power: 11 kW Spindle speed: 1,800 rpm Grinding wheel: 400 x 50 mm Tapered grinding spindle mount: D = 65 mm Taper pitch: 1:5 Feed rate (Y): 100 mm/min Inspections can be arranged at short notice by appointment! Lhjdpfx Apsrntirotoh Best regards, R. Suckow / Managing Director UNITTOOL Werkzeugmaschinen GmbH 33758 Schloß Holte Stukenbrock Görlitzerstraße 9

Tahun pembuatan: 2014, Kondisi: baik (bekas), nomor mesin/kendaraan: 2014-1313, Offer 22651 Technical specifications: Lhodpfx Apji Apb Nsteh - Mobile design with motorized forward/reverse travel and steering - Motorized sanding stroke forward/reverse with variable speed control - Longitudinal sanding stroke, forward and back - Motorized contact pressure – adjustable sanding pressure - Sanding belt dimensions approx. 2000 x 50 mm - Contact wheel: Width 60 mm / Diameter 300 mm - Pneumatic connection: 6 bar - Drive: 400 V / 2880 rpm / 7 kW - Required floor space approx. W 5700 x H 1200 x D 1400 mm - Weight approx. 800 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 1991, 400 mm swing diameter O F F E R We can offer you, subject to prior sale and errors excepted, available ex stock, on a non-binding basis: WMW - GLAUCHAU Universal Internal Cylindrical Grinding Machine with Plunge Grinding Attachment Model: SI 6/1 AS-N x 315 Year of manufacture: 1991 _____ Internal grinding diameter range: 40 - 400 mm Max. grinding depth: 315 mm Max. external grinding diameter: 400 mm Max. workpiece weight: 630 kg Workpiece swing diameter with/without chuck guard: 500 / 600 mm Centre height above table: 360 mm 16-step workpiece spindle speeds: 40 – 400 rpm Workpiece spindle bore, approx.: 53 mm Workpiece headstock swivelling, max.: 30° Workpiece headstock transverse adjustment, max.: 400 mm Grinding spindle stock Z-feed: 70 mm Grinding spindle stock transverse adjustment, approx.: 100 mm Grinding head infeed, interval cycle: 0.001 – 0.025 mm/stroke Grinding head infeed, continuous: 0.1 – 1 mm/min Max. table travel: 630 mm Steplessly adjustable table speed: 0.1 – 8 m/min (10 m/min) Max. distance between workpiece headstock and grinding spindle: 1,250 mm Grinding spindle stock movement on table: 520 mm Grinding spindle drive approx.: 7.5 kW Total drive approx.: 17 kW - 380 V - 50 Hz Weight, approx.: 6,000 kg Lsdpfoxyllvex Aptjhh Accessories / Special Equipment: • Universal internal grinding spindle stock with program-controlled cycles for grinding cylindrical and conical bores with one or multiple diameters, external grinding, and face grinding of narrow faces • Plunge grinding attachment, hydraulically swivelling, with automatic cycles for grinding one or multiple faces as well as stepped faces simultaneously • Electronic program control with large operator panel and ammeter for both grinding spindles • Belt-driven grinding spindle with built-in spindle and 5 separate interchangeable grinding spindles with various pulleys of differing diameters • Dressing units for both grinding spindles; large chuck guard on the workpiece headstock • HEIDENHAIN digital display for cross adjustment of the workpiece headstock • Comprehensive accessories including 4-jaw chuck approx. 520 mm, 3-jaw chuck approx. 380 mm, 3-jaw chuck approx. 130 mm, pulleys, spindle sleeves, grinding wheel holders, foot switch • Separate hydraulic unit, attached electrical cabinet, coolant system with magnetic separator Condition: Good to very good condition! Suitable for all grinding tasks! Please click here for a video of the machine: Delivery: Ex stock, immediate availability, FCA Metzingen Payment: strictly net – upon receipt of invoice

Kondisi: bekas, Tahun pembuatan: 2000, de-techdetails-01 Ljdjw Dugajpfx Aptohh

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 150 mm, panjang total: 620 mm, mechanics-all wear parts of the machine are replaced, including the X-axis adjustment spindle. All assemblies are brought to a like-new condition. After the overhaul, the machine is comparable to a new one. geometry-the machine is completely disassembled down to the guideways. Before restoring the geometry of the individual tables and assemblies, both X- and Z-axis guideways are hand-scraped and restored to an as-new condition. Upon completion, the machine receives a measurement protocol according to manufacturer specifications. painting-after the geometry restoration, the machine is prepared for repainting. All housings, tables, and the machine bed are stripped of old paint, cleaned, and repainted. Ljdpfx Asurw Uyeptohh hydraulics-the entire lubrication system, including lubrication unit, is replaced. The hydraulic unit is also completely overhauled. conventional internal cylindrical grinding machine TSCHUDIN HTG 610I equipment of the machine: technical data: center height: 150 mm distance between centers: 680 mm grinding length: 620 mm machine weight and required space: 2,500 kg // 2,340 x 1,445 x 1,900 mm equipment of the machine (standard): 1 pc. workpiece spindle head MK5 1 pc. control panel 1 pc. mount for internal grinding spindle 1 pc. speed control device for belt spindle (UJ50 / UJ80) FISCHER 1 pc. hydraulic unit optional: • digital 2-axis measuring system • freely adjustable speed (1–800 rpm) including soft start (higher speeds optional upon clarification of technical details) • separate low-speed setting for part alignment