Beli Krauss Maffei Km 350 bekas (230)

Kondisi: baik (bekas), Tahun pembuatan: 1999, Krauss Maffei Injection Moulding Machine KM 420 - 2700 C1 Giedpfx Ahewqd Aqe Dop • Year of manufacture: 1999 Technical Data Clamping Unit • Clamping force: 4200 kN • Max. mould opening force: 250 kN • Movable platen force (opening): 124 kN • Movable platen force (closing): 102 kN • Mould platen dimensions (W x H): 1270 mm x 1200 mm • Tie bar spacing (W x H): 800 mm x 800 mm • Mould opening stroke: 1020 mm • Minimum mould height: 380 mm • Max. daylight: 1400 mm • Ejector force (forward/backward): 95 / 48 kN Injection Unit • Screw diameter: 80 mm • L/D ratio: 20 • Injection pressure: 1829 bar • Shot volume: 1433 cm³ • Shot weight (PS): 1304 g • Injection rate: 513 cm³/s • Max. plasticising capacity: 108 g/s • Nozzle contact force: 173 kN Electrical and Hydraulic System • Pump motor power: 75 kW • Installed heating power: 36 kW • Number of barrel heating zones: 7 • Oil tank capacity: 1075 l Dimensions and Weight • Machine dimensions (L x W x H): approx. 7.06 m x 2.33 m x 2.51 m • Total machine weight: 20,500 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Injection Moulding Machine Krauss Maffei KM 250-1900 C1 Year of manufacture: 2007 ✅ General Information Manufacturer: Krauss Maffei Model: KM 250-1900 C1 Giedpfx Aexak Ucsh Dsp Year of manufacture: 2007 Clamping system: fully hydraulic Control system: MC4 with colour monitor, control panel, and floppy disk drive 🔹 Clamping Unit Clamping force: 2500 kN Opening force: 160 kN Platen movement force: opening 86 kN, closing 68 kN Platen dimensions: 995 x 1050 mm Tie bar spacing: 630 x 630 mm Mould opening stroke: 820 mm Mould installation height: 330 mm Max opening width: 1150 mm Ejector stroke: 200 mm Ejector force: 58/28 kN 🔹 Injection Unit Screw diameter: 70 mm Injection pressure: 1778 bar Shot volume: 1047 cm³ Shot weight (PS): 953 g Screw speed: 218/306 rpm Injection rate: 400 cm³/s Output (PS): 75 g/s (standard), 105 g/s (high speed) 🔹 Electro-hydraulic Equipment Pump motor power: 55 kW Cylinder heaters: 30 kW (6 zones) Dry cycles according to Euromap: 1400 1/h Oil tank: 720 l 🔹 Dimensions and Weight Net weight (including control cabinet): 14.2 t Dimensions (L x W x H): 6.21 x 2.04 x 2.38 m

Kondisi: baru, Tahun pembuatan: 2025, Injection Moulding Machine – Krauss Maffei KM 160-750 CX Year of manufacture: 2025 Fully hydraulic clamping system. MC 6 control system based on an industrial computer using real-time Ethernet technology, equipped with an integrated 21.5" operator panel with a touch colour display. Plasticising unit Complete plasticising unit for thermoplastics, screw diameter 50 mm, with non-return valve and open nozzle Nozzle radius: 10 mm Nozzle opening: 4 mm Technical data (standard version) Clamping unit Clamping force: 1600 kN Opening force: 86 kN Platen dimensions (H x V): 820 x 845 mm Tie bar spacing (H x V): 520 x 520 mm Opening stroke: 650 mm Minimum mould height: 300 mm Maximum daylight: 950 mm Ejector stroke: 150 mm Ejector force forward/backward: 23 / 10 kN Injection unit Screw diameter: 50 mm L/D ratio: 20.2 Injection pressure: 1892 bar Injection volume: 393 cm³ Shot weight (PS): 357 g Injection speed: 90 mm/s Injection flow rate (standard): 177 cm³/s Screw rotation speed (standard): 265 rpm Electro-hydraulic system Pump motor power: 22 kW Giedexdd N Ujpfx Ah Djp Installed heating power: 15.5 kW Dry cycle time according to Euromap 6: 2.1 s Oil tank capacity: 400 l Linear Robot – Krauss-Maffei LRX 100 Payload < 10 kg (gripper + actuators + parts) Part deposition on operator-opposite side Axes: X axis (from mould): 620 mm, servomotor Y axis (vertical, with motor brake): 1200 mm, servomotor Z axis (transversal): 1500 mm, servomotor Dimensions and weight Net weight (with control cabinet): 6.10 t Machine dimensions (L x W x H): 4.93 x 1.62 x 2.04 m

Kondisi: baru, Tahun pembuatan: 2025, Injection Moulding Machine – Krauss Maffei KM 300-1400 CX Year of manufacture: 2025 Fully hydraulic clamping unit. MC 6 control system based on an industrial computer operating in real-time Ethernet technology, equipped with an integrated 21.5" operator panel with a colour touch screen. Plasticising Unit Complete plasticising unit for thermoplastics, screw diameter 60 mm, with non-return valve and open nozzle Nozzle radius: 15 mm Nozzle opening: 6 mm Technical specifications (standard version) Clamping unit Clamping force: 3000 kN Gjdpjxdd Spofx Ah Deip Opening force: 169 kN Platen dimensions (H x V): 995 x 1050 mm Tie bar spacing (H x V): 630 x 630 mm Opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight: 1150 mm Ejector stroke: 200 mm Ejector force (forward/back): 58 / 28 kN Injection unit Screw diameter: 60 mm L/D ratio: 20.8 Injection pressure: 2006 bar Injection volume: 679 cm³ Shot weight (PS): 618 g Injection speed: 110 mm/s Injection rate (standard): 311 cm³/s Screw speed (standard): 260 rpm Electro-hydraulic system Pump motor power: 45 kW Installed heater capacity: 22.4 kW Dry cycle time according to Euromap 6: 2.7 s Oil tank capacity: 720 l Linear robot – Krauss-Maffei LRX 150 Payload < 15 kg (gripper + drives + parts) Part deposit on operator-opposite side Axes: X axis (from mould): 900 mm, servomotor Y axis (vertical, with motor brake): 750/750 mm, servomotor, telescopic Z axis (transverse): — Dimensions and weight Net weight (with control cabinet): 13.2 t Machine dimensions (L x W x H): 6.16 x 2.17 x 2.26 m

Kondisi: baru, Tahun pembuatan: 2025, Injection Molding Machine – Krauss Maffei KM 651-6100 GX Gisdpfxoxdd U Do Ah Dop Year of manufacture: 2025 Hydraulic-mechanical, two-platen clamping system with four pressure pads on the fixed platen and four locking units on the moving platen. PV – injection unit regulation. MC6 control system based on an industrial computer with real-time Ethernet technology, equipped with an integrated 21.5” operator panel with color touchscreen. Plasticizing unit Complete plasticizing unit for thermoplastics, screw diameter 95 mm, with check valve and open nozzle Nozzle radius: 25 mm Nozzle opening: 9 mm Technical specifications (standard version) Clamping unit Clamping force: 6500 kN Opening force: 455 kN Mounting platen dimensions (H x V): 1660 x 1530 mm Tie bar spacing (H x V): 1200 x 1020 mm Opening stroke: 1450 mm Mold height (min.–max.): 450 – 1000 mm Daylight: 1900 mm Ejector stroke: 300 mm Ejector force front/rear: 140 / 70 kN Injection unit Screw diameter: 95 mm L/D ratio: 23.0 Injection pressure: 1795 bar Injection volume: 3367 cm³ Shot weight (PS): 2391 g Injection speed: 110 mm/s Injection rate: 780 cm³/s Screw speed (standard): 147 rpm Plasticizing capacity (at standard screw speed): 102 g/s Nozzle contact force: 166 kN Electro-hydraulic system Pump motor power: 97 kW Installed heater capacity: 54 kW Number of cylinder heating zones: 7 Dry cycle time according to Euromap 6: 3.3 s / 840 mm Dry cycle time according to KM standard: 2.9 s / 600 mm Oil tank capacity: 1435 l Linear robot – Krauss-Maffei LRX 250 Payload < 25 kg (gripper + drives + parts) Placement on operator-opposite side Axes: X axis (from mold): 900 mm, servomotor Y axis (vertical, telescopic, with motor brake): 1000/1000 mm, servomotor Z axis (crosswise): 2500 mm, servomotor Dimensions and weight Net weight (including control cabinet): 38.5 t Machine dimensions (L x W x H): 10.19 x 3.03 x 2.51 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Krauss Maffei KM 850-12000 MX Injection Moulding Machine Year of manufacture: 2011 Robot LRX 500 Z axis: 4000 mm X axis: 1500 mm Y axis: 1250/1250 mm Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV - injection unit control. MC 5 control system with colour monitor, integrated control panel, and USB data carrier. Plasticizing unit Complete plasticizing system for thermoplastics with 135 mm screw diameter, non-return valve, and open nozzle Nozzle radius: 25 mm, nozzle opening: 9 mm TECHNICAL DATA Clamping Unit - Clamping force: 8500 kN - Mold opening force: 560 kN - Platen dimensions (H x V): 1600 x 1600 mm - Tie bar spacing (H x V): 1140 x 1140 mm - Mold opening stroke: 1600 mm - Mold height (min-max): 500 - 1100 mm - Daylight opening: 2100 mm - Ejector stroke: 300 mm - Ejector force: 200/100 kN Injection Unit - Screw diameter: 135 mm - Injection pressure: 1389 bar - Injection volume: 8588 cm³ - Shot weight for PS: 6098 g - Injection rate: 1414 cm³/s Electro-hydraulic Equipment Giedpfxewqdyio Ah Djp - Rated pump drive power: 132 kW - Dry cycle time (Euromap 6): 965 1/h - Oil tank capacity: 2440 l Weight and Dimensions - Net weight incl. control cabinet: 49 t - Installation footprint (L x W x H): 11.72 x 2.92 x 2.71 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Krauss Maffei KM 900 – 8100 GX Injection Moulding Machine Year of manufacture: 2015 General Description: Hydraulic-mechanical, two-platen clamping system with 4 pressure pads on the fixed platen and 4 adjustment units on the moving platen. The machine is equipped with a PV-type injection unit adjustment system (proportional valve). Control is handled via the modern MC6 system, based on an industrial-grade computer with real-time Ethernet technology. The control panel is an integrated 19-inch touchscreen with a colour display, LED backlighting, and process visualisation using ProcessDesigner. Plasticising Unit: Complete unit for thermoplastics processing Wear-resistant (abrasion-protected) version Screw diameter: 105 mm Non-return valve and open nozzle Technical Specifications: Clamping Unit: Clamping force: 9,000 kN Mould opening force (pressure pads): 630 kN Platen dimensions (W x H): 1660 x 1530 mm Tie bar spacing: 1180 x 1000 mm Max. mould opening stroke: 1600 mm Mould height (min – max): 500 – 1100 mm Max. opening stroke: 2100 mm Ejector stroke: 300 mm Ejector force (forward / return): 140 / 70 kN Injection Unit: Screw diameter: 105 mm L/D ratio: 23.0 Injection pressure: 1778 bar Injection volume: 4546 cm³ Shot weight (for PS): 3228 g Injection rate: 805 cm³/s Screw speed (standard): 150 rpm Nozzle contact force: 166 kN Electrical and Hydraulic Equipment: Pump motor power: 120 kW Heater power: 59 kW Number of barrel heating zones: 7 Dry cycle time / stroke (Euromap 6): 3.3 s / 826 mm Gisdpfx Ahowyxbgs Dsp Dry cycle time / stroke (KM standard): 2.9 s / 590 mm Hydraulic oil tank capacity: 1450 l Dimensions and Weight: Net weight (with control cabinet): 40 tons Machine dimensions (L x W x H): 10.72 x 3.03 x 2.51 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Krauss Maffei KM 2300 - 12000 MC Injection Moulding Machine Year: 2004 Control system type: MC 4 Operating hours: 93,900 Clamping unit Clamping force: 23,000 kN Max. mold opening force: 1,420 kN Moving platen stroke force (opening): 227 kN Moving platen stroke force (closing): 203 kN Mold plate dimensions (H x V): 2,830 mm x 2,400 mm Tie bar spacing (H x V): 2,000 mm x 1,600 mm Mold opening stroke: 2,600 mm Minimum mold height: 1,100 mm Maximum mold height: 1,800 mm Maximum daylight: 3,700 mm Hydraulic ejector - stroke: 350 mm Ejector force forward/backward: 415/115 kN Injection unit Screw diameter: 135 mm L/D ratio: 23 Injection pressure: 1,389 bar Shot volume: 8,588 ccm Injection weight, PS: 7,815 g Gjdpfx Ahjwq Ed As Doip Injection rate: 1,019 ccm/s Screw speed: 113 1/min Max. plasticizing rate: 191 g/s Nozzle pressure: 241 kN Electrical and hydraulic equipment Nominal pump motor power: 132 kW Installed heating capacity: 997 kW Number of barrel heating zones: 7 Drying cycles per hour: 350 1/h Tank capacity: 2,500 ltr. Dimensions and weight Machine dimensions: 15.15 m x 4.15 m x 3.29 m Total machine weight: 143,000 kg Max. mold weight: 62,000 kg LRX 1000 Robot X-axis - 2,000 mm Y-axis - 3,000 mm Z-axis - 5,000 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Krauss Maffei KM 250 – 1900 C1 Injection Moulding Machine Year of manufacture: 2007 Control system: MC4 Operating hours: only 8,900! Clamping unit: Clamping force: 2,500 kN Max. mould opening force: 160 kN Movable platen traverse force – opening: 86 kN Movable platen traverse force – closing: 68 kN Mould platen dimensions (H × L): 995 × 1,050 mm Tie bar spacing (H × W): 630 × 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight between platens: 1,150 mm Ejector stroke (hydraulic): 200 mm Ejector force (forward/back): 58 / 28 kN Injection unit: Screw diameter: 70 mm L/D ratio: 20 Injection pressure: 1,778 bar Stroke volume: 1,047 cm³ Shot weight (PS): 953 g Injection rate: 400 cm³/s Screw speed (standard/option): 218 / 306 rpm Max. plasticising rate: 75 g/s Nozzle contact force: 110 kN Electro-hydraulic equipment: Pump motor power: 55 kW Installed heating power: 30 kW Number of barrel heating zones: 6 Oil tank capacity: 720 l Dimensions and weight: Machine dimensions (L × W × H): approx. 6.21 × 2.04 × 2.39 m Total weight: 14,500 kg Maximum mould weight: 3,430 kg Accessories and additional equipment: Oil tank Anti-vibration pads 3 × core pullers 8 × hot runner control zones 2 × air valves Robot interface compliant with Euromap 67 Additional information: Machine located in Poland Gsdpfx Ahsw A N Hfs Dsip Ready for collection Possibility to arrange loading, transport, installation, and commissioning

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, KRAUSS MAFFEI KM 300-1900 C1 INJECTION MOULDING MACHINE Year of manufacture: 2007 Includes: Wittmann W 731 robot General Description We offer a used injection moulding machine from the renowned Krauss Maffei brand, model KM 300-1900 C1, equipped with a Wittmann W 731 robot. The machine features a fully hydraulic clamping system, as well as a modern MC4 control system with a color monitor, integrated operator panel, and floppy disk drive. Plasticising Unit Complete plasticising unit for thermoplastics, wear-resistant version, equipped with a 60 mm diameter screw, check valve, and open nozzle. Technical Specifications Clamping Unit Clamping force: 3000 kN Mould opening force: 160 kN Movable platen force: – Opening: 86 kN – Closing: 68 kN Godpfx Aew Du Htoh Djip Platen dimensions (H x W): 995 x 1050 mm Tie bar spacing: 630 x 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight: 1150 mm Ejector stroke: 200 mm Ejector force: 58 / 28 kN Injection Unit Screw diameter: 60 mm Injection pressure: 2420 bar Shot volume: 769 cm³ Shot weight (PS): 700 g Screw speed (standard/option): 218 / 306 rpm Injection rate: 294 cm³/s Plasticising rate: – Standard speed: 55 g/s – Increased speed: 78 g/s Electro-hydraulic System Pump motor power: 55 kW Heater power: 30 kW Number of cylinder heating zones: 6 Dry cycles (Euromap): 1350 cycles/h Oil tank capacity: 720 l Dimensions & Weight Net weight with control cabinet: 14.2 t Overall dimensions (L x W x H): 6.21 x 2.04 x 2.38 m

Kondisi: baik (bekas), Tahun pembuatan: 2011, Krauss Maffei KM 850-12000 MX Injection Moulding Machine With Krauss Maffei Robot Year of manufacture: 2011 Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV – Injection unit regulation. MC 5 control system with colour monitor, integrated control panel and USB data carrier. Plasticising unit Complete plasticising system for thermoplastics with a 135 mm screw diameter, non-return valve, and open nozzle Nozzle radius: 25 mm, nozzle opening: 9 mm TECHNICAL DATA Clamping unit - Clamping force: 8,500 kN Gijdotrya Repfx Ah Dep - Mold opening force: 560 kN - Platen dimensions (H x V): 1600 x 1600 mm - Tie bar spacing (H x V): 1140 x 1140 mm - Mold opening stroke: 1,600 mm - Mold height (min - max): 500 – 1,100 mm - Daylight opening: 2,100 mm - Ejector stroke: 300 mm - Ejector force: 200/100 kN Injection unit - Screw diameter: 135 mm - Injection pressure: 1,389 bar - Injection volume: 8,588 cm³ - Shot weight for PS: 6,098 g - Injection rate: 1,414 cm³/s Electro-hydraulic equipment - Pump motor rated power: 132 kW - Dry cycle time according to Euromap 6: 965 1/h - Oil tank capacity: 2,440 l Weight and dimensions - Net weight with control cabinet: 49 t - Installation footprint (L x W x H): 11.72 x 2.92 x 2.71 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Krauss Maffei KM 300-1000 CX Injection Moulding Machine Year of manufacture: 2008 Manufacturer: Krauss Maffei Control system: MC 5 with color monitor, integrated control panel, and disk drive station Clamping system: Fully hydraulic Plasticizing Unit SP 1000 Screw diameter: 50 mm Non-return valve, open nozzle Nozzle radius: 15 mm, opening: 3 mm Clamping Unit Clamping force: 3,000 kN Opening force: 169 kN Mounting plate dimensions (h × v): 995 × 1050 mm Tie-bar clearance: 630 × 630 mm Mold opening stroke: 820 mm Minimum mold height: 330 mm Maximum daylight opening: 1,150 mm Ejector stroke: 200 mm Ejector force (forward/back): 58 / 28 kN Injection Unit Screw diameter: 50 mm L/D ratio: 22.0 Injection pressure: 2,304 bar Injection volume: 432 cm³ Shot weight (PS): 393 g Injection speed: 170 mm/s Godpfx Ahsw U Rcde Djip Injection flow rate: 334 cm³/s Screw speed (standard): 370 rpm Plasticizing capacity (at standard speed): 54.3 g/s Electrical and Hydraulic Equipment Pump motor power: 45 kW Heater power: 18.7 kW Number of heating zones: 5 Dry cycle time / stroke according to Euromap 6: 2.8 s / 441 mm Oil tank capacity: 720 l Dimensions and Weight Net weight (including control cabinet): 12.5 t Dimensions (L × W × H): 6.11 × 2.17 × 2.25 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Injection Moulding Machine Krauss Maffei KM 850-12000 MX With Krauss Maffei LRX 500 robot Year of manufacture – 2011 Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV – injection unit regulation. MC 5 control system with color monitor, integrated control panel, and USB data carrier. Plasticizing unit Complete plasticizing unit for thermoplastics with a 135 mm screw diameter, check ring, and open nozzle Gisdpfx Aowkhmmsh Dsp Nozzle radius 25 mm, nozzle orifice 9 mm TECHNICAL DATA Clamping unit - Clamping force: kN 8500 - Mold opening force: kN 560 - Platen dimensions (h x v): mm 1600 x 1600 - Tie bar clearance (h x v): mm 1140 x 1140 - Mold opening stroke: mm 1600 - Mold height (min-max): mm 500 - 1100 - Daylight opening: mm 2100 - Ejector stroke: mm 300 - Ejector force: kN 200/100 Injection unit - Screw diameter: mm 135 - Injection pressure: bar 1389 - Shot volume: cm³ 8588 - Shot weight for PS: g 6098 - Injection rate: cm³/s 1414 Electro-hydraulic equipment - Rated motor power (pump): kW 132 - Dry cycle time (Euromap 6): 1/h 965 - Oil tank capacity: l 2440 Weight and dimensions - Net weight with control cabinet: t 49 - Footprint dimensions (L x W x H): m 11.72 x 2.92 x 2.71

Kondisi: baik (bekas), Tahun pembuatan: 2000, jam operasional: 77.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 2.000 kN, diameter sekrup: 50 mm, Type: KM 200-700 C2 (CLEAN ROOM) Year: 2000 Screw diameter: 50 mm Operating hours: 77,000 h With accumulator Euromap 12 Injection pressure: 1,892 bar Tie bar distance: 560 x 560 mm Platen size: 915 x 915 mm Minimum mold height: 350 mm Opening stroke: 700 mm Gedpfxjwm Ifne Ah Doip Daylight: 1,050 mm

Kondisi: baik (bekas), Tahun pembuatan: 2006, jam operasional: 65.000 h, gaya penjepit: 2.000 kN, diameter sekrup: 55 mm, Hidravlični izvlek jedra 2x Vroč tekač 4x Zračni ventili Gedpfx Ahjtqifno Deip

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036946, gaya penjepit: 800 kN, diameter sekrup: 40 mm, volume langkah: 201 cm³, tekanan injeksi: 1.860 batang, berat injeksi: 183 g, tinggi cetakan (min.): 150 mm, gaya ejektor: 22.000 N, lintasan ejektor: 100 mm, langkah pembukaan: 750 mm, tinggi pemasangan: 400 mm, panjang total: 4.750 mm, lebar total: 1.670 mm, tinggi total: 1.850 mm, berat keseluruhan: 5.600 kg, kapasitas pemanasan: 11,5 kW (15,64 hp), jenis penggerak: Vollelektrisch, bentang bebas: 735 mm, berat alat: 600.000 g, Injection moulding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The precisionMolding base injection moulding machine offers the perfect entry-level solution for all-electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short delivery times. This machine can be used in a wide variety of application areas such as packaging industry, electrical and electronics industry, medical technology, and automotive industry. Your benefits: – Optimised price-performance ratio for a broad range of applications – High energy efficiency thanks to an all-electric machine concept – Fast delivery times through a base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670023) CONTROL UNIT - MC P1 with 15” TFT colour display with multi-touch functions CLAMPING UNIT - Clamping force: kN 800 - Max. mould opening force: kN 120 - Tie bar spacing (h x v): mm 470 x 420 - Platen size (h x v): mm 610 x 560 - Min. – max. mould height: mm 150 – 400 - Opening stroke: mm 750 - Max. mould opening stroke: mm 350 - Ejector drive: electric - Ejector stroke: mm 100 - Ejector force forward/backward: kN 22 / 22 - Ejector speed forward/backward: mm/s 300 / 300 Giedpfxoud H Dmj Ah Dop - Max. mould weight: kg 600 INJECTION UNIT - Screw diameter/type: mm 40 / Standard - Effective L/D ratio: 20.0 - Injection pressure: bar 1860 - Shot volume: cm³ 201 - Shot weight at max. stroke for PS: g 183 - Injection speed: mm/s 200 - Injection flow rate: cm³/s 251 - Screw drive/speed: rpm 334 - Plasticising rate (standard): g/s 24.7 - Nozzle contact force: kN 34 ELECTRICAL PARAMETERS - Connected load: kW 20.6 - Installed heating capacity: kW 11.5 - Power supply: V / Hz 400 / 50 3-phase with neutral conductor WEIGHT AND DIMENSIONS - Net weight with control cabinet: t 5.6 - Length x width x height: m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT - Low-wear plasticising unit - BluePower full insulation of plasticising cylinder - Open nozzle - Air valve 1-fold (BWAP) - Pneumatic control for hot runner shut-off 1-fold - Electrical cascade interface 4-fold - Euromap interface for handling E18, E63 - Euromap interface (central computer) E67, E77 - Water battery 4-fold - Automatic central lubrication - Adaptive Process Control (APC) - Injection-compression control - Graphic analysis package The machine is located at our plant in Parsdorf and is available at short notice. Further optional extras can be offered on request. We look forward to your enquiry.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036940, gaya penjepit: 1.600 kN, diameter sekrup: 50 mm, volume langkah: 393 cm³, tekanan injeksi: 1,892 batang, berat injeksi: 358 g, tinggi cetakan (min.): 200 mm, gaya ejektor: 33.000 N, lintasan ejektor: 100 mm, langkah pembukaan: 950 mm, tinggi pemasangan: 500 mm, panjang total: 5.650 mm, lebar total: 1.820 mm, tinggi total: 1.950 mm, berat keseluruhan: 9.700 kg, kapasitas pemanasan: 15,5 kW (21,07 hp), jenis penggerak: Vollelektrisch, bentang bebas: 570 mm, berat alat: 600.000 g, Injection moulding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and versatile stock machines: The base injection moulding machine, precisionMolding, is the perfect entry-level solution for all-electric injection moulding, allowing you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short delivery times. The machine is suitable for diverse applications, such as packaging, electrical and electronics industries, medical technology, and automotive sector. Your advantages: – Optimised price-performance ratio for a wide range of applications – High energy efficiency due to the all-electric machine concept – Ability to meet demanding delivery deadlines thanks to a base machine concept with a broad spectrum of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine No.: 61036683, new, YOM 2013) CONTROL SYSTEM ■ MC P1 with 15” TFT colour display, multitouch functionality CLAMPING UNIT ■ Clamping force: kN 1600 ■ Max. mould opening force: kN 120 ■ Clear space (H x V): mm 570 x 520 ■ Mounting platen size (H x V): mm 770 x 720 ■ Mould installation height min. - max.: mm 200 - 500 ■ Max. opening width: mm 950 ■ Max. mould opening stroke: mm 450 ■ Ejector drive: electric ■ Ejector stroke: mm 100 ■ Ejector force fwd/back: kN 33 / 33 ■ Ejector speed fwd/back: mm/s 300 / 300 ■ Max. mould weight: kg 1200 INJECTION UNIT ■ Screw diameter / type: mm 50 / standard ■ Effective L/D ratio: 20.2 ■ Injection pressure: bar 1892 ■ Shot volume: cm³ 393 ■ Shot weight at max. stroke for PS: g 358 ■ Injection speed: mm/s 200 ■ Injection flow rate: cm³/s 393 ■ Screw drive/speed: rpm 267 ■ Plasticising capacity (standard screw): g/s 36.5 ■ Nozzle contact force: kN 42 ELECTRICAL SPECIFICATIONS ■ Connected load: kW 31.2 ■ Installed heating capacity: kW 15.5 ■ Power supply: V / Hz 400 / 50, 3 phases with neutral DIMENSIONS & WEIGHT ■ Net weight incl. electrical cabinet: t 9.7 ■ Length x width x height: m 5.65 x 1.82 x 1.95 ADDITIONAL EQUIPMENT ■ Wear-resistant plasticising unit ■ BluePower full insulation of plasticising cylinder ■ Open nozzle ■ Air valve 1-fold (BWAP) ■ Pneumatic hot runner shut-off control 1-fold ■ Electrical interface for pneumatic cascade 4-fold ■ Euromap handling interfaces E18 + E67 ■ Euromap interface (central computer) E67, E77 ■ Water manifold 4-fold ■ Electrical pre-wiring for hydraulic auxiliary unit ■ Automatic central lubrication ■ Adaptive Process Control (APC) ■ Injection compression moulding circuitry ■ Graphic analysis package ■ Swivelling device for injection unit The machine is located at our facility in Parsdorf and is available at short notice. Additional options can be offered upon request. Gijdpfx Aeugfw Dsh Dep We look forward to your enquiry.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036683, gaya penjepit: 1.600 kN, diameter sekrup: 50 mm, volume langkah: 393 cm³, tekanan injeksi: 1,892 batang, berat injeksi: 358 g, tinggi cetakan (min.): 200 mm, gaya ejektor: 33.000 N, lintasan ejektor: 100 mm, langkah pembukaan: 950 mm, tinggi pemasangan: 500 mm, panjang total: 5.650 mm, lebar total: 1.820 mm, tinggi total: 1.950 mm, berat keseluruhan: 9.700 kg, kapasitas pemanasan: 15,5 kW (21,07 hp), jenis penggerak: Vollelektrisch, bentang bebas: 570 mm, berat alat: 600.000 g,

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61037337, gaya penjepit: 800 kN, diameter sekrup: 30 mm, volume langkah: 113 cm³, tekanan injeksi: 2.500 batang, berat injeksi: 103 g, tinggi cetakan (min.): 400 mm, gaya ejektor: 22.600 N, lintasan ejektor: 150 mm, langkah pembukaan: 900 mm, panjang total: 3.960 mm, lebar total: 1.480 mm, tinggi total: 2.020 mm, berat keseluruhan: 3.550 kg, kapasitas pemanasan: 10,9 kW (14,82 hp), jenis penggerak: Hadraulisch, bentang bebas: 470 mm, berat alat: 1.000.000 g,

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036936, gaya penjepit: 800 kN, diameter sekrup: 35 mm, volume langkah: 135 cm³, tekanan injeksi: 1.837 batang, berat injeksi: 123 g, tinggi cetakan (min.): 150 mm, gaya ejektor: 22.000 N, lintasan ejektor: 100 mm, langkah pembukaan: 750 mm, tinggi pemasangan: 400 mm, panjang total: 4.750 mm, lebar total: 1.670 mm, tinggi total: 1.820 mm, berat keseluruhan: 5.900 kg, kapasitas pemanasan: 8,9 kW (12,10 hp), jenis penggerak: Vollelektrisch, bentang bebas: 470 mm, berat alat: 600.000 g, Plastics injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and versatile stock machines: The precisionMolding base injection moulding machine provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short delivery times. The machine can be utilised in a wide range of applications, such as packaging, electrical and electronics, medical technology, and the automotive industry. Your benefits: – Optimised cost-performance ratio for a broad spectrum of applications – High energy efficiency through an all-electric machine concept – Fast lead times thanks to the base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (Order 38670013) (Machine no.: 61036936, new, YOM 2023) CONTROL SYSTEM  MC P1 with 15” TFT colour display featuring multi-touch functionality CLAMPING UNIT  Clamping force kN 800  Max. mould opening force kN 120  Daylight (h x v) mm 470 x 420  Platen size (h x v) mm 610 x 560  Mould installation height min.-max. mm 150 - 400  Max. opening stroke mm 750  Max. mould opening stroke mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force fwd/rev kN 22 / 22  Ejector speed fwd/rev mm/s 300 / 300  Max. mould weight kg 600 INJECTION UNIT  Screw diameter / type mm 35 / standard  Effective L/D ratio 20.0  Injection pressure bar 1837  Shot volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow cm³/s 192  Screw drive / speed rpm 382  Plasticizing rate (standard screw) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heating power kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral WEIGHT AND DIMENSIONS  Net weight with control cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Wear-resistant plasticizing system  BluePower full insulation for plasticizing cylinder  Open nozzle  1-fold air valve (BWAP)  1-fold pneumatic control for hot runner shut-off  4-fold electric interface for cascade control  Electrical pre-installation for hydraulic auxiliary unit  Euromap interface for handling E18, E63  Euromap interface (host computer) E67, E77  4-fold water manifold  Automatic central lubrication  Adaptive Process Control (APC)  Injection compression moulding switch  Graphic analysis package  Swing-out injection unit Gisdpfx Asuggb Deh Dop The machine is located at our plant in Parsdorf and is available at short notice. Additional optional features can be offered on request. We look forward to your enquiry.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036721, gaya penjepit: 6.500 kN, diameter sekrup: 70 mm, jarak antara tiang: 1.110 mm, volume langkah: 1.078 cm³, tekanan injeksi: 1.877 batang, berat injeksi: 981 g, langkah pembukaan: 3.200 mm, tinggi pelat: 1.540 mm, jenis penggerak: Hydraulisch, bentang bebas: 3.200 mm, berat alat: 2.200.000 g, Injection molding machines directly from the manufacturer! As KraussMaffei, the manufacturer, we are pleased to offer you our inspected and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW series sets new benchmarks in quality and productivity. The sophisticated GuideX slide shoe ensures optimal absorption of force, increasing tooling lifetime. The innovative GearX locking system engages immediately and reliably. Powerful, user-friendly, and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24” TFT color screen, multitouch functionality CLAMPING UNIT - Clamping force kN 6500 - Maximum mold opening force kN 455 - Daylight (H x V) mm 1110 x 960 - Mounting platen (H x V) mm 1540 x 1440 - Mold height (min. - max.) mm 1550 (without center platen) - Maximum opening stroke mm 3200 Gjdpow U N Ixefx Ah Doip - Maximum mold open distance mm 1650 - Maximum mold weight kg 22000 INJECTION UNIT 1 SP2000 - Screw diameter / type mm 60 / Thermoplastic - Effective L/D ratio 23.3 - Injection pressure bar 2420 - Shot volume cm³ 792 - Shot weight (max. stroke, PS) g 720 - Injection speed mm/s 140 - Injection flow rate cm³/s 396 - Screw drive speed 1/min 285 - Plasticizing throughput g/s 72.2 - Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 - Screw diameter / type mm 70 / Thermoplastic - Effective L/D ratio 20 - Injection pressure bar 1877 - Shot volume cm³ 1078 - Shot weight (max. stroke, PS) g 981 - Injection speed mm/s 140 - Injection flow rate cm³/s 539 - Screw drive speed 1/min 285 - Plasticizing throughput g/s 98.3 - Nozzle contact force kN 82 ELECTRICAL PARAMETERS - Connected load kW 341 - Power supply V / Hz 400 / 50 3-phase with neutral conductor WEIGHT AND DIMENSIONS - Net weight t 43.5 - Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull 2-fold (BWAP), 2-fold (FWAP) - Mold heating 96-fold (3.5 kW each) - Euromap interface for handling E18 - Euromap interface (central computer) E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphics analysis package - Sliding table with servo-driven turning unit - Vertical center platen - Parallel clamping and opening movements during injection, with platen parallelism control between FWAP and center platen or BWAP and center platen - ColorForm interface: signal interface for connection of an RPM system - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for “1-K Dummy Operation” - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our Parsdorf facility and is available at short notice. Additional options can be offered upon request. We look forward to your inquiry.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 6.500 kN, diameter sekrup: 70 mm, en Godpfxov Stbmo Ah Dsip

Kondisi: hampir baru (bekas), Tahun pembuatan: 2008, Horizontal injection moulding machine by Krauss-Maffei, 120 tons clamping force. All-electric machine. Year of manufacture: 2008. MC5 control system. 63,000 operating hours. 40 mm screw diameter. Extras: anti-vibration pads, 8-zone flowmeter. Additional options: 1x pneumatic valve, 6 hot runner zones, Euromap 67 robot interface. The machine is delivered fully reconditioned by our technical team and in optimal working condition. We also offer on-site commissioning service. Giedpfxjttgybo Ah Dsp Technical Details INJECTION WEIGHT 185 g INJECTION VOLUME 201 cm³ OPERATING HOURS 63,000 YEAR OF MANUFACTURE 2008 TIE BAR DISTANCE 470 x 470 mm PLATEN DIMENSIONS 780 x 770 mm CLAMPING FORCE 1,200 kN INJECTION PRESSURE 1,860 bar SCREW DIAMETER 40 mm MIN. MOULD HEIGHT 200/450 mm OPENING STROKE 850 mm

Kondisi: hampir baru (bekas), Tahun pembuatan: 2008, jam operasional: 6.200 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 4.200 kN, diameter sekrup: 75 mm, Krauss-Maffei KM 420-2000 CX Injection molding machine from Krauss-Maffei with 420 tons clamping force. Only 6,000 automatic operating hours. Year of manufacture: 2008. MC5 control unit. Screw diameter: 75 mm. Extras: 8 hot runner zones, 2 core pulls on the fixed platen, 2 core pulls on the moving platen, 1 pneumatic valve on the moving platen. The machine is delivered RE-Conditioned by the technical expert team of UK Transitus. Optionally, we can offer on-site commissioning at the customer's facilities, ensuring reliable operation upon installation completion. Technical Details SCREW DIAMETER: 75 mm INJECTION PRESSURE: 1635 BAR INJECTION VOLUME: 1237 cm³ SHOT WEIGHT: 1126 g Gisdpfx Ahewq D Efj Dsp MAX. PLATEN DISTANCE: 1400 mm MIN. MOLD HEIGHT: 380 mm OPENING STROKE: 1020 mm TIE BAR DISTANCE: 900 x 800 mm PLATEN DIMENSIONS: 1270 x 1230 mm SCREW DIAMETER: 75 mm CLAMPING FORCE: 4200 kN YEAR OF MANUFACTURE: 2008 OPERATING HOURS: 6,282

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2006, jam operasional: 60.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 8.000 kN, diameter sekrup: 85 mm, Horizontal Injection Molding Machine by Krauss-Maffei. 800 tons clamping force. Year of manufacture: 2006. Screw diameter: 85 mm. MC5 control. Approximate working hours: 60,000. The machine is delivered RE-Conditioned by our team of technical specialists and in optimal working condition. We can also offer on-site commissioning at the customer's facility, ensuring the machine operates properly upon completion of installation. Technical Specifications SCREW DIAMETER: 85 mm Gedpfx Aow Avafoh Djip INJECTION PRESSURE: 2,242 Bar SHOT VOLUME: 2,695 cm³ INJECTION WEIGHT: 2,452 g (PS) YEAR OF MANUFACTURE: 2006 WORKING HOURS: 60,000 MIN./MAX. MOLD HEIGHT: 550/1,100 mm MAX. DAYLIGHT: 2,100 mm OPENING STROKE: 1,600 mm TIE BAR DISTANCE: 1,120 x 1,000 mm PLATEN DIMENSIONS: 1,600 x 1,530 mm CLAMPING FORCE: 8,000 kN