Beli Lamella bekas (122)

Kondisi: baru, Tahun pembuatan: 2026, Gannomat Concept 70 Eco Lamella Body Press with Rapid Traverse Technical Data: Lamella body press from our showroom Working range: width from 150 - 2,500 mm, height from 150 - 1,400 mm, depth 700 mm - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with industry-proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the pressure beams is continuously electronically controlled via 2 potentiometers and set via a frequency inverter, ensuring absolutely wear-free torque transmission. Fodpjy Egz Sjfx Am Sjph - Pressing force for horizontal pressure beam min. 500 daN (kg) up to continuously adjustable max. 2200 daN (kg) - Pressing force for vertical pressure beam min. 300 daN (kg) up to continuously adjustable max. 2200 daN (kg) - Includes option: Rapid traverse speed for quick positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speed 5/10/25 mm/sec and rapid traverse speed 50 mm/sec. The sensors can be switched off for pressing special parts. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45-degree carcasses. Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm Machine is available for immediate delivery from our showroom. Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: baru, Tahun pembuatan: 2025, Gannomat Concept 70 Eco Lamella-Type Case Clamp with Rapid Traverse Technical Data: Lamella-type case clamp from our showroom; Working range: width from 150 - 2,500 mm, height from 150 - 1,400 mm; depth 700 mm; Fpsdpsiidm Njfx Am Sjh - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are continuous support plates, 40 mm thick and coated - The pressing force of the pressure beams is infinitely variable via 2 potentiometers and set electronically using a frequency inverter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely variable max. 2200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely variable max. 2200 daN (kg) - Options included: Rapid traverse speed function for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds of 5/10/25 mm/sec, and rapid traverse speed of 50 mm/sec. Sensors can be deactivated for pressing special components. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45-degree cabinets. Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm The machine is on display in our showroom and can be delivered immediately. Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: bekas, Tahun pembuatan: 2023, New demonstration machine! List price: €86,567 net Base machine, complete in standard configuration for drilling and grooving. For detailed technical specifications, please refer to the ProTec Type 0571 data sheet. Machining unit equipped with: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y 4th drilling axis in Y Workpiece sizes and weights - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in through-feed mode, max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg Milling unit Profit HSK63F with 3-position magazine for automatic tool change, motor 5.5 kW (S1), 1,000-20,000 rpm with frequency converter, clockwise and counterclockwise rotation, for HSK63F tool holder with 462E/OZ25 collet, cutter length up to 130 mm Information: MultiUnit machining head with PowerBlock 21/23 spindles, grooving saw, and optional Profit milling unit Connected load 12 kVA Rated current 17.5 A Fuse 32 A Voltage 400 V, 50 Hz, 3 Ph (without transformer) Power supply TN or TT Pneumatic connection 7 bar (102 psi) On machine: coupling plug (quick coupling) ¼, DN7.2, brass, factory side To machine: coupling socket (quick coupling) ¼, DN7.2, brass, customer side Supply line, hose inner diameter min. 12 mm Compressed air consumption: continuous: approx. 230 L/min (approx. 3.8 L/sec) (compressed air) Extraction connection 3x extraction ports Ø 80 mm Extraction speed 30 m/sec - measured at extraction port Extraction requirement min. approx. 2500 m³/h Machine weight approx. 1650 kg (with options!) Machine installation location: The ProTec can generally be anchored to the floor. A concrete floor (or foundation) is required (at least at the four corners/feet of the machine). Equipment: Protec 571 Profit HSK63F with 3-position magazine Folding roller table 765 mm (Y-axis), for machine front, width 500 mm Folding roller table 765 mm (Y-axis), for machine rear, width 500 mm Auxiliary stop 600 mm with integrated rollers for roller tables Additional safety equipment via slat curtain Precondition for horizontal milling for Lamello P-System (without tools for Lamello P-System) Drill bit set for Protec, shank Ø 10 mm with clamping surface (JSO) 1 HW roof tip drill 5x70mm (NL 35mm), LH #30566-5-05035-L 3 HW dowel drill 5x70mm (NL 35mm), RH #30540-5-05035-R 4 HW dowel drill 5x70mm (NL 35mm), LH #30540-5-05035-L 3 HW dowel drill 8x70mm (NL 35mm), RH #30540-5-08035-R 5 HW dowel drill 8x70mm (NL 35mm), LH #30540-5-08035-L 2 HW dowel drill 10x70mm (NL 35mm), LH #30540-5-10035-L 1 HW cup drill 15x70mm (NL 35mm), LH #30300-5-15070-L 1 HW cup drill 20x70mm (NL 35mm), RH #30300-5-20070-R 1 HW cup drill 35x70mm (NL 35mm), RH #30300-5-35070-R HW grooving cutter Ø 125/30 mm Groove width (SB) 4.0 mm, Z=12, LH, Leitz Only for chipboard and MDF, solid wood on request and by arrangement Tool holder HSK63 F 3.00 pcs For 462E/OZ25 collet Collet 462E/OZ25 for shank 25 mm, 3.00 pcs. Indexable insert end mill Z1+1 1.00 pc HW with indexable insert spiral drill Ø20, S25, LH 120, L2/L3 58 mm Grooving cutter HW indexable inserts Z1 1.00 pc with indexable insert spiral drill, D Ø 10 mm, d Ø 10 mm, L1 75 mm, L2 25 mm, L3 40 mm, RH (the adapter 0571WAB10 must be ordered separately). Decorative grooving cutter HW indexable inserts Z1 1.00 pc D Ø 17 mm, d Ø 10 mm, L1 Fsdpfx Amjw Tfzfj Sjph

Kondisi: baik (bekas), Tahun pembuatan: 1995, nomor mesin/kendaraan: 735, Fungsionalitas: berfungsi sepenuhnya, daya: 4,65 kW (6,32 hp), tegangan masuk: 380 V, arus masuk: 10 A, Pressa Korpusk Lamella Höfer Tipe Koptronik Komponen / Area Tekan: 2500 mm x 1350 mm Lebar komponen maks.: 600 mm Waktu tekan: dapat diatur melalui timer Tekanan tekan vertikal dan horizontal dapat diatur secara terpisah Fodpfx Aszccrtjm Sjph

Kondisi: bekas, Tahun pembuatan: 2022, Additionally, freight €4,000.00 and installation and commissioning €5,000.00 Sanding Machine B Sand 5 with Partial Rotator Mode of Operation: The panel is placed on the infeed table. It is conveyed into the partial rotator and centered. The panel is sanded in the sanding machine, once in forward and return direction. The panel is then rotated in the partial rotator. The second side of the panel is sanded in the sanding machine. Afterwards, there are two options: either the panel is moved onto the outfeed table and unloaded, or it returns to the infeed table and is unloaded there (the second option increases the processing time). Sanding Machine Equipment: - 1 upper sanding flap roller, suitable for surfaces. Power: 3 kW; Diameter: 420 mm; Length: 1300 mm. - Cross brush, suitable for sanding cross grain. Diameter: 420 mm; Length: 300 mm. Power: 1.1 kW. - Cross brush, suitable for sanding cross grain. Diameter: 420 mm; Length: 300 mm. Power: 1.1 kW. - 3 upper sanding discs to perfectly cut longitudinal and transverse wood fibers. Each with 1.5 kW; Diameter: 400 mm. - Disc brush for chamfering edges. The unit operates as a deep brush. Once the panel edges are detected, it follows the door edges. Power: 0.75 kW; Diameter: 250 mm. Machine Features: - The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate panel sanding. Fjdpfxsvvkipo Am Seph - All tools are controlled via frequency converters. - All brushes are equipped with quick-change sanding strips without the need to replace the hub. - The discs are fitted with air nozzles to optimize cleaning and cycle time. - Sanding discs feature a Velcro attachment system. - Feed rate and revolutions are controlled by PLC to prevent edge damage to parts. - High-quality sanding on 4 sides thanks to the machine’s consistent material removal. - Automatic and quick changeover of sanding units. - Constant pass-through height; PLC and industrial software allow integration into a finishing line. - Infinitely variable speed for discs, brushes, and feed, based on frequency converter full equipment. - Right/left rotation of discs and brushes with different abrasives. - Individually driven adjustment for discs, rollers, and belts. - Additional setting for brushes and discs to optimize abrasive usage and adjust sanding pressure on surfaces. - Robust frame made from steel tubing guarantees excellent rigidity, stability, and flatness. - Planed top bed ensures optimal parallelism of the working surface for the sanding discs. - All sanding unit carriages utilize linear recirculating ball guides for high load capacity and precision. - Motorized feed belt controlled by frequency converter, 0.55 kW. - Machine doors are equipped with safety interlocks. - Machine doors with viewing windows allow observation of workpieces during processing. - Under the sanding units, there are Ø 80 mm rubber-coated pressure rollers to secure workpieces during operation. - Low operating costs thanks to individual replacement of the flaps. - Low operating noise due to the closed machine housing. - All units have extraction housings with corresponding extraction connectors. Cover plate with extraction socket. - Fully enclosed machine housing for a clean working environment.

Kondisi: bekas, en-001 Fpjdpfozbrp Sex Am Sjh

Tahun pembuatan: 2025, Kondisi: baru, new machine year of manufacture: 2025 features and technical specifications: complete in standard version with: - sturdy, torsion-resistant frame made of steel, welded and bolted construction - upper slat press beam with 6 elements, lateral slat press beam with 5 elements - slat press beams with field-proven tolerance compensation (Ganner system) for tightly compressed carcass joints - counter-pressure surfaces (side pressure wall, base) are continuous 38 mm thick coated bearing plates - continuous pressing surface with a height of 95 mm at the lower vertical press beam - electric motor adjustment of both press beams via precision trapezoidal threaded spindles (with increased pitch and concentricity accuracy) and high-performance carriage nuts with grease reservoir - pressing is performed electromechanically via 2 separate worm gear motors (2 x 0.75 kW) - the pressing force of the press beams is infinitely electronically adjustable by 2 potentiometers and controlled via frequency inverters, making the pressing force control completely wear-free - pressing force for horizontal press beam: min. 500 daN (kg) up to stepless max. 2200 daN (kg) - pressing force for vertical press beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - pressing and adjustment speed of the press beams with fine positioning, via 3-step selector switch 5 / 10 / 25 mm/sec - inching operation for precise positioning of both press beams, e.g. for low pressing forces, drawers, and carcasses at 45° Fpjdpsw Nafkofx Am Ssh - very simple operation via 6 separate pushbuttons, 8 movement sequences selectable via control system - freely adjustable pressing time preselection 0-30 min (switchable to seconds or hours) with individually programmable opening dimensions of both press beams - post-press function to increase or reduce the pressing force during the pressing process - working height/feeding height: 300 mm - working dimensions: length min: 150 mm, max: 2500 mm; height min: 150 mm, max: 1400 mm; depth: 700 mm including extra charge for rapid traverse speed for quick positioning of the press beams, controlled by automatic workpiece detection with sensors in the press beams, pressing speed 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special parts including set of machine feet for 500 mm working height location: flörsheim availability: short notice

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2021, jam operasional: 50 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 000247, Gluestream PU-300 1C Single-Component Polyurethane Adhesive Application Machine Used machine, in near-new condition • Maximum gluing width: 300 mm • Gluing head divided into 3 combs, each 100 mm wide, individually controlled by solenoid valve • Glue bead spacing: 10 mm • Tray with anti-adhesive liquid that automatically closes the combs when the machine is not dispensing • Glue application rate: 100 to 200 g/m², adjustable as required • Gear-type metering pump • Glue viscosity range: 10,000 to 30,000 mPas • Feed speed: 7 to 15 m/min • Support rack for 200 l drum • PLC control with touchscreen, KINCO brand • Machine by GLUESTREAM, Slovakia, manufactured in Ukraine • CE certified • Year of manufacture: 2021. Installed in May 2022. Like new, less than 200 hours of operation WE ALSO HAVE THE HYDRAULIC PRESS FOR GLULAM BEAM PRODUCTION Fpsdpot Nfarsfx Am Sjh

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Belt sander from 2010. This WEBER KSF-3-1350 is equipped with three sanding belts suitable for premium fine, veneer, and high-gloss sanding applications. It features a constant working height of 900 mm and a continuously adjustable feed speed from 3 to 18 m/min. If you are looking for superior sanding solutions, consider the WEBER KSF-3-1350 machine we offer for sale. Contact us for further information on this machine. Machine Frame and Feed System • Heavy-duty welded steel construction for 3 sanding units • Constant feed height: 900 mm • Control panel and sanding belt change on the left side (in feed direction) • Continuously adjustable feed speed: 3–18 m/min, frequency-controlled • Vacuum conveyor belt version with 5.5 kW vacuum blower and vacuum channel up to the machine top Unit 1: Cross-belt Unit • Pressure lamella belt with felt and graphite • ISD segmented pressure bar system with 11 mm workpiece detection and 44 mm pressure bar width • Workpiece-controlled sanding belt cleaning device Unit 2: CBF Combination Unit • Grooved rubber contact roller Ø 130 mm, 60 Shore hardness • Cross-running lamella belt with separate 4.0 kW drive motor • ISA-Link pressure beam system with 11 mm workpiece detection and 22 mm pressure width (counter-rotating) • Workpiece-controlled oscillating sanding belt cleaning device Unit 3: Cross-belt Unit • ISD segmented pressure beam system with 11 mm workpiece detection and 44 mm pressure beam width • Workpiece-controlled sanding belt cleaning device Fpodjy Twwyepfx Am Ssh Controls and Functions • Siemens MP 377 12" multi-panel HMI: 12" color display, program memory for 300 programs, all parameters adjustable via program • WEBER i-Touch control with rotary knob navigation • WEBER AWDM: automatic thickness adjustment at machine infeed with start switch • Overthickness safety roller at infeed: automatic lifting of contact roller and segmented pressure beams; feed shut-off • ISA/ISD control: high-resolution workpiece detection in 22-mm increments; flexible handling of complex shapes; multiple loading with minimal gaps; sanding intensity and pressure programmable • ISA articulated pressure beam system (Unit 2): pressure element adjustable longitudinally and transversely • ISD segmented pressure beam system (Units 1 and 3): separately adjustable edge pressure (only outer edge or outer and inner edge); selectable for longitudinal and cross edge or just longitudinal Technical Data • Working width: 1350 mm • Drive motor unit 1 (Eco-Drive, frequency-controlled): 15.0 kW • Drive motor unit 2 (Eco-Drive, frequency-controlled): 20.0 kW • Drive motor unit 3 (Eco-Drive, frequency-controlled): 15.0 kW • CBF drive: 3.0 kW • Vacuum blower drive: 5.5 kW • Backstop (frequency-controlled): 3.0 kW • Height adjustment drive (frequency-controlled): 0.75 kW • Sanding belt speed (frequency-controlled): approx. 3–20 m/s • Sanding belt size (cross-belts): 2 × 150 × 5100 mm • Sanding belt size (wide belt): 1370 × 2620 mm • Workpiece thickness (min/max): 4–140 mm • Working height (constant): 900 mm • Feed speed, stepless: 3–18 m/min Additional Equipment • Workpiece ejection with WEBER ES system (workpiece-controlled; energy-saving; individual carriage control) • WANDRES Micro-Cleaning, single brush version (Power sword brush with integrated micro-moistening for optimal removal of lacquer dust)

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, berat keseluruhan: 1.400 kg, panjang total: 7.000 mm, lebar total: 2.400 mm, tinggi total: 2.800 mm, ketebalan dinding: 40 mm, nomor mesin/kendaraan: 16.8m² Bürocontainer Premium-Linie, Dimensi luar: 240/700 cm Tinggi: 280 cm Dinding: Panel sandwich Pelapis luar: Panel pelapis lamella horizontal mewah Fodpfx Ajquqhdem Sjph Plafon: Plat LT galvanis + isolasi + pelapis PVC Lantai: Multipleks hidrofobik + laminasi Jendela dan pintu: Jendela fasad + pintu – aluminium

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, daya: 11 kW (14,96 hp), ketinggian potong (maks.): 115 mm, lebar pemotongan (maks.): 4.200 mm, jenis penyesuaian ketinggian: listrik, SCHEER PA 7004 – 4200 x 4681 mm AS NEW Panel Sizing System DIRECTLY FROM THE MANUFACTURER with Lift Table, Optimization, and New PC Control AS NEW CONDITION 1-Year Warranty For sale is a fully refurbished SCHEER PA 7004 panel sizing system with a processing capacity of 4200 x 4681 mm. The machine has been technically and visually overhauled and is equipped with a new industrial PC (Linux OS), network connectivity, and remote maintenance features. Ideally suited for industrial joineries, furniture manufacturers, interior fitters, and panel processing businesses valuing precision, performance, and high availability. Features and Highlights: - New PC control - New industrial PC with Linux operating system - Network connectivity (LAN/WLAN) - TeamViewer remote maintenance - USB interfaces - Graphical cut pattern display - Multilingual user interface - 15" flat-screen monitor in a swiveling control panel - Optional label printing system available Panel Saw FM 22-4200 - Hardened guideways - Servo-driven saw unit - Feed speed 2–70 m/min - Return speed up to 100 m/min - Automatic lowering of saw unit - Main saw 11 kW - Scoring saw 2.2 kW - Automatic adjustment of cutting height - Offcut device - Lamella safety curtain - Safety cover interlock - Clamping beam safety device Technical Data: - Cutting length: 4,200 mm - Fence depth: 4,681 mm - Cutting height: 115 mm - Fully automatic angle pressing device For precise crosscuts with automatic workpiece clamping. Material Feeding Table HP 5100 - Servo-driven material pusher - 2 overhead guideways - Rack and pinion guide - 7 liftable clamp fingers - 3 controlled withdrawal bolts - 11 triple roller tracks - Feed speed 25 m/min - Return speed 50 m/min Four-Spindle Lift Table TE 5085 - Table length: 4,200 mm - Table width: 2,800 mm - Lifting height: 640 mm - Loading height: 280 mm - Motorized roller tracks - Bi-directional operation - Cut-outs for rear feeding Automatic Alignment Systems: Longitudinal Alignment WP 5038 - Dual version - Two motorized alignment fingers - For panel lengths up to 4,800 mm Cross Alignment WP 5037 - 3 pneumatic stop and alignment cylinders - Integrated braking device Workpiece Support - Angle stop table HP 5094 - 2 workpiece support tables HP 5095 Air Cushion System LK 5161 - Radial fan and piping included Optimization Software OPTIMIN The system features the proven OPTIMIN cut optimization. Parts lists are entered directly at the machine, automatically optimized, and immediately made available for processing. Benefits: - Material savings - Shorter processing times Fpjdpfxsza Efwo Am Soh - Optimum machine utilization - Simple operation Additional Features: - Powered roller conveyor right - Set of carbide saw blades - Operating manual - Hardware dongle for optimization software Summary: A high-performance, comprehensively equipped panel sizing system with modernized control, automatic alignment, lift table, and optimization software. This machine has been fully overhauled and is ready for immediate use. ✓ AS NEW CONDITION ✓ New industrial PC with Linux ✓ Network-ready & TeamViewer ✓ OPTIMIN optimization software ✓ 1-year warranty

Kondisi: siap digunakan (bekas), Chip Conveyor, Knoll 320 s-1/200, Gebrauchtmaschine Hersteller: Knoll Typ: 320 s-1/200 Baujahr: 2015 Gesamtabmessungen: 6200 x 1310 x 1610 mm Fjdpewmmltefx Am Sjph Bandabmessungen: 500 x 1400 x 4700 mm Lamellenabstand: 315 mm

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: Kühlmitteleinrichtung, Coolant Filtration System for Cutting Fluid RUEZ Coolant Tank with Integrated Sludge Scraper and Chip Conveyor • Coolant filtration unit for cutting fluid (KSS) • Includes two-piece RUEZ lamella separator • Includes RUEZ safety tray according to WHG, providing 100% containment capacity • Includes clean tank and RUEZ magnetic roller filter Fpjdpfxotwptts Am Sjh • Year of manufacture: 2022, unused & as-new condition • RAL 7035 light grey • Superstructure for swarf bin • No belt filter, sedimentation system • Immediately available • Price negotiable Description of KSS System: • Total capacity: approx. 34,720 l • Filling volume: approx. 32,710 l • Usable volume: approx. 22,020 l + approx. 6,017 l (clean tank) • Dimensions (L/W/H): approx. 7,341 mm / 2,800 mm / 2,000 mm • Tank walls: 4 mm / S235JRG2 steel • Walk-on, segmented tank covers • Tank supports: approx. 100 mm • OWE 2/C level sensor as leakage protection • Inlet/distribution with strainer basket • 2 supply pumps, type: NB100-25/4-15 kW • 2,000 l/min at 2.1 bar • Piping: DN 150/125 • Return line: DN 100 • PN 16 • RUEZ float switch RB 200-3/1900 • FTL31-CA4M2AAWBJ level sensor as overfill protection (clean tank) • RUEZ control unit • Siemens TIA • PLC: SIMATIC S7-1200, CPU 1215C • HMI: KTP700 operator panel • Signal tower red-yellow-green

Kondisi: bekas, 3176 Planer and Moulder WEINIG Hydromat 1000 Used, Year of manufacture: 2007 6 spindles: bottom - right - left - top - top - bottom Electronic feed: 6 - 60 m/min Working width: 80 - 150 mm Working height: 23 - 65 mm Lamella finished width: 4 - 15 mm Max. number of lamellae: 16 pieces Lamella lengths: 400 - 4,000 mm 1st spindle horizontal bottom Brake motor 11 kW, 6,000 rpm Spindle diameter: 45 mm Tool diameter: 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6,000 rpm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle vertical left 7.5 kW, 6,000 rpm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of spindle, swiveling, pneumatic roller pressure 4th spindle horizontal top 15 kW, 6,000 rpm, diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable and swiveling, pneumatic 5th spindle horizontal top as saw spindle Brake motor 37 kW, 5,000 rpm Diameter: 45 mm Axial adjustment reduced to 25 mm Tool diameter: 112 - 250 mm Max. saw depth: 35 mm Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable and swiveling, pneumatic 6th spindle horizontal bottom as saw spindle Brake motor 30 kW, 5,000 rpm Axial adjustment reduced to 25 mm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. saw depth: 35 mm Axial adjustment: 45 mm All moulding spindles with high-performance bearings Electronic feed 7.5 kW Feed roller adjustment relative to left spindle, axial 35 mm Shortened roller spacing relative to right spindles Linear meter counter, electric, with 2 counters Fjdpfx Ameu Agh Se Soph Short infeed table (1.2 m) with 2 powered rollers over table 1 powered, serrated roller in the table, side pressure roller Automatic Waxilit/lubricant pump Machine with 4-roller outfeed, oscillating shafts extended to 200 mm 2 powered, serrated rollers in outfeed table 2 powered, serrated rollers in the machine table Pressure beam before and discharge after top spindle with mechanical digital display DigiSet (digital dual display) for left and top spindles Electric height adjustment for top spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex site near South Tyrol, without transport and installation Description and price subject to change Transport and loading by us optionally possible To avoid possible misunderstandings, inspection on site by appointment is possible and recommended Sale is as-is Technical specifications, condition description, year of manufacture, and delivery scope as per manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty is provided for used machines; it is sold as seen Images and videos serve as examples and do not constitute the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipment Delivery terms: ex location

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, SCHEER BS 5102-V Dowel Hole Drilling and Insertion Machine The BS 5102-V is a high-performance, electronically controlled machine for precise and efficient end-grain drilling as well as the exact insertion of wooden dowels. It is ideally suited for industrial woodworking—particularly in furniture and cabinet manufacturing. Condition & Service: Condition: As new (completely overhauled and newly painted) Functionality: Fully operational Warranty: 12 months CE compliant / Dust tested Technical Data & Features: Workpiece width: min. 60 mm / max. 1200 mm (pendulum operation: max. 600 mm) Workpiece thickness: 15–60 mm Drilling depth: max. 45 mm Vertical stroke of carriage: 7.5–50 mm Min. lateral drilling distance: 10 mm Drilling unit: 9,000–18,000 rpm (adjustable), 1.5 kW Drilling system: M10 external (Scheer system) Servo motor: 0.54 kW, max. 60 m/min feed rate Dowel size: 8 x 30 / 8 x 50 mm, DIN 68150 Form A Glue system: 1:1 diaphragm pump, max. 7 bar Glue reservoir: spiral feeder, 3.5-liter capacity Extraction connection: Ø 80 mm | Airflow: 540 m³/h at 30 m/s Clamping cylinders: 4 short-stroke cylinders (Ø 63 mm), angled clamping Power supply: 400 V, 50 Hz Machine Construction & Operator Comfort: Controlled X-axis with machine base as workpiece support X-carriage with linear guide and rack-and-pinion drive Servo drive for feed system Clamping portal with 4 adjustable clamping cylinders—controllable in 2 groups Stop rulers: left, right and center on the table Fpjdpjunvg Tsfx Am Soh Drilling depth and dowel projection adjustable directly on the carriage Cut-off device & Safety Systems: Protective hood interlock Lamella safety curtain Integrated extraction ducts Control & Operation: PC with Siemens PLC control User interface: WP-Studio—dialog-oriented programming Operating system: Windows 10 Display: 17" color monitor Separate workpiece programs for left & right control panels (mirroring possible) Glue quantity individually adjustable per program Network capable (LAN/WLAN), compatible with Windows, Linux, Mac, Novell Remote maintenance & software updates possible Optional Equipment: Y-axis: automatic adjustment of drilling and glue application modules Electronic glue monitoring: ensures controlled glue flow Additional drilling unit for surface drilling: Drill motor: 1.5 kW at 18,000 rpm Drill feed: pneumatic Drill stroke: max. 25 mm Depth stop: spindle & SIKO display Drill distance to reference edge: 5–35 mm Mount: M10 external, max. Ø 35 mm Workpiece length: min. 70 / 90 mm Guarantee & Reliability: We are confident in the stability and manufacturing quality of our machines—that's why you receive a 7-year warranty on the machine frame, especially the supporting structure and guide mechanism. Electrical supply parts and standard wear parts are excluded. Additionally, we provide a 1-year warranty on the complete machine (incl. control system, hydraulics, pneumatics, etc.). Conclusion: This machine combines modern control technology, high build quality, and user-friendly operation. Ideal for precise dowel hole drilling and automated dowel insertion—reliable and efficient in continuous operation. 📞 Contact us for an individual offer or to schedule a demonstration. Machine available from stock. Delivery, commissioning, and training optionally available.

Kondisi: bekas, Tahun pembuatan: 2015, jam operasional: 6.800 h, daya: 99 kW (134,60 hp), Perlengkapan: kabin, pendingin udara, penggerak semua roda,

Kondisi: baru, Tahun pembuatan: 2026, Shot blasting house components: flat conveyor floor, transverse screw conveyor, bucket elevator, air sifting unit, screen, abrasive media bunker, blasting unit, filter system, fan, air ducts, louvered extraction wall, injection box, electrical control system supplied as a kit without assembly. Alternatively, the system components can also be installed on your premises by our specialist fitters. Fpjdpfshc T Nljx Am Ssh

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Travel paths: X850 x Y500 x Z610 mm Fedpog N Adbjfx Am Ssph 2-axis swivel rotary table FIBRO HEIDENHAIN iTNC 530 Table diameter 400 mm HEIDENHAIN linear scales x, y, z Purge air HR-410 electronic handwheel Water gun Main spindle 12,000 rpm with direct drive 10/17 kW Air cooling through the spindle 40-position tool changer SK 40 Left and right auger conveyors Chip conveyor Vertical steel lamella safety cover up to roof height M&H infrared measuring probe

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, daya: 15 kW (20,39 hp), ketinggian potong (maks.): 250 mm, lebar pemotongan (maks.): 150 mm, penggerak gergaji: 15.000 W, masa garansi: 12 bulan, Übersetzung ins Deutsche (für Machineseeker / TruckScout24): Die POWER Plus Dünnschnittgattersäge wurde entwickelt, um mittelständischen und kleinen Unternehmen eine erschwingliche Lösung für den Zuschnitt von Massivholz zu bieten. Die Maschine verfügt über ein robustes, massives Gussgestell und ist mit einem 15 kW (20 PS) Hauptmotor ausgestattet. Die Dünnschnittgattersäge schneidet Massivholzblöcke in verleimfähige Lamellen und sorgt dabei für minimalen Sägeschnittverlust. Das Gerät kann Werkstücke bis zu 150 mm Breite und 250 mm Höhe verarbeiten. Die POWER Plus Dünnschnittgattersäge bietet kleineren Herstellern eine leistungsstarke und hochwertige Maschine für die Produktion von Furnierlamellen – und das zu einem erschwinglichen Preis. Einsatzgebiete: Parkett- und Fertigfußböden, Türen, Fenster, Treppen, Möbel, Musikinstrumente, Bleistifte, Sportgeräte (Ski, Snowboards, Hockeyschläger), Holzverpackungen für Obst und Gemüse usw. Ausstattungsmerkmale: Fodpoy Rk Umofx Am Ssph - Hochpräzise Lamellen mit verleimfähiger Oberfläche und Toleranz von ± 0,1 mm (abhängig von der Lamellenbreite) - Das „Plus“-System ermöglicht eine schnelle Einrichtung und einfache Verstellung der oberen Andrückrollen über Elektromotor - Air-Blast-System direkt hinter den Sägeblättern hält die Blätter sauber und verhindert Hitzestau - Automatische Maschinenöffnung für sicheren und einfachen Aus- und Einbau des Gatters - Robuster, langlebiger Gusseisen-Sägenträger, spielfrei auf Linearführungen montiert - Die Bewegung der Vorschubrollen ist mit der Hubbewegung des Gatters synchronisiert - Modulares Einlauf-System kann Mittelanschlag, Seitenanschlag oder Kanalsystem aufnehmen - Splitterschutz verhindert Ausrisse auf der Unterseite des Werkstücks - Massiver Gusskorpus minimiert Vibrationen - Oben und unten angetriebene Vorschubrollen - Automatische zentrale Schmierstelle - Massivstahl-Kurbelarme Optionale Ausstattungen: - Hobelmodul oben und unten am Auslauf - Luftstrahlsystem zur Kühlung mit zusätzlichem Lüfter - Hobelmodul oben am Einlauf - Automatischer Beschicker - Nassschnitt-Option - Blätter-Spannungsüberwachung (Tension Master)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, jam operasional: 5.999 h, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 2.000 mm, panjang umpan sumbu Y: 20.000 mm, panjang umpan sumbu Z: 2.000 mm, jarak pergerakan sumbu X: 620 mm, jarak lintasan sumbu Y: 350 mm, jarak gerak sumbu Z: 400 mm, kecepatan pemakanan sumbu X: 5 m/menit, laju pemakanan gandar Y: 5 m/menit, laju pemakanan sumbu Z: 5 m/menit, jarak gerak quill: 80 mm, kecepatan spindel (maks.): 4.500 rpm, pergeseran cepat sumbu Y: 5 m/menit, pergerakan cepat sumbu Z: 5 m/menit, panjang meja: 820 mm, lebar meja: 420 mm, kecepatan rotasi (maks.): 4.500 rpm, kecepatan rotasi (min.): 1 rpm, berat keseluruhan: 1.970 kg, lebar yang dibutuhkan: 2.435 mm, persyaratan ruang panjang: 1.875 mm, kebutuhan tinggi: 1.800 mm, berat benda kerja (maks.): 350 kg, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Universal milling and drilling machine High-quality, robust machine offering high precision, long service life, and maximum operating comfort. Multi-ribbed cast iron construction ensures full working performance throughout the entire working area. Control System SIEMENS 840D SL path control Working Area X / Y / Z: 620 / 350 / 400 mm Drive System 2-stage, high-torque main gearbox with automatic gear shifting Drive power 100% / 25% duty cycle: 5.5 / 7.0 kW Torque 100% / 25% duty cycle: 210 / 340 Nm Speed range: stepless gearbox 0 - 4500 rpm Digital Feed Infinitely variable feed in all axes. Feed range: 0 - 2000 mm/min, steplessly adjustable Rapid traverse: 5 m/min Handwheel increment: 2.5 mm per revolution on X / Y / Z axis Milling Head – Vertical Vertical milling head tiltable +/- 90° (180°) Extendable vertical quill with manual clamping, 80 mm Tool holder SK 40 DIN 69872 Hydromechanical drawbar system DIN 69872 – standard Additionally, milling head is moveable on Y-axis by 150 mm. For horizontal machining, the milling head does not need to be removed; it can simply be moved into the rear rest position. Fixed Angle Table Clamping surface: 820 x 420 mm T-slots: 1 pc/14 H7 locating slot; 5 pcs/14 H12, spacing 63 mm Table load: 350 kg Standard Equipment Direct path measuring systems on all axes Wear-free digital drive, infinitely variable for all axes Main spindle motor with spindle speed braking function Oriented spindle stop, vertical and horizontal, with thread-cutting cycle without compensating chuck Tiltable milling head with extendable quill Automatic axis feed X, Y, Z with rapid traverse Mechanical safety handwheels with graduated ring on all axes Ball screw spindles on all axes Electronic overload protection for all axes 2-channel emergency stop system Fedjy R Ebzopfx Am Ssph Electrical cabinet compactly integrated into the machine Splash guard enclosure with optimal, user-friendly access Hardened glass window at the rear of the cabin Open at the top—front and right doors incl. front sliding door secured with interlock switch Locked when de-energized, with additional maintenance opening on the left cabin side (bolted, removable) Freestanding, mobile coolant tank 80 liters Dimensions (LxWxH): 1250x460x200 mm Automatic central lubrication Steel-lamella cover to protect Z-guide Halogen machine light V24 Easy-to-use milling guard with plexiglass window Operator manual, spare parts diagram, and wiring diagram in paper form Set of machine leveling feet Transport bar and locating rings for 2-leg lifting tackle Color: Light grey RAL 7035, tele grey RAL 7045 textured finish Space Requirements – Electrical Data Machine weight approx. 1970 kg Required space (W x D): 2435 x 1875 mm Mains connection: 3x400 V AC 50 Hz Power consumption: 17 kVA Max. fuse: 35 A NH Network type: TN-S Connection type: hard-wired Further information in the attached PDF. Machine supplied without tools and accessories.

Kondisi: baru, 8 sanding units Sanding width: 180 (260) mm Maximum sanding height: 160 mm Dimensions (L x W x H): 3065 x 1600 x 1900 mm Machine weight approx. 1500 kg LÖWER-Leistomat SD ----- Automatic fine sanding machine for wood sanding (surface smoothing, de-nibbing, and edge rounding) or intermediate sanding of profiled window bars. Equipped with Softdisc technology for visible surfaces, as well as automatic profile and width adjustment. - 2 side-mounted flap wheel units, each 0.75 kW, L=120 mm, D=200 mm 1 top-mounted softdisc unit Ø=200 mm, 0.75 kW 1 top-mounted flap wheel unit L=200 mm, 0.75 kW 1 bottom-mounted softdisc unit Ø=200 mm, 0.75 kW 1 bottom-mounted flap wheel unit L=200 mm, 0.75 kW 2 side-mounted flap wheel units, each 0.75 kW, L=120 mm, D=200 mm - Linear guidance of all sanding units via linear ball bearing sets on hardened shafts - Time-controlled plunging of all flap wheel units directly above the incoming workpiece edges. Plunging allows deeper setting of units into the profiles. - Motorized workpiece thickness adjustment - Variable sanding flap speed via frequency converters for adaptable sanding intensity (separate control for discs, surface wheels, and side wheels) - Disc units as Softdisc with Velcro fastening for sanding discs (wood sanding) - Feed via three lower and one upper conveyor belts, plus spring-loaded pressure rollers with infinitely variable speed of 4–15 m/min - Touch panel settings: workpiece thickness, workpiece width (individual setting for left side units), plunge depth of side units, spindle speed, feed speed - Parameters can be saved as machine programs in program mode - Operation in automatic mode with contactless workpiece width and profile detection, and automatic adjustment of sanding units to workpiece width and profile shape (workpiece height is preset) - Pneumatically controlled driven infeed roller, automatic clamping of the workpiece, and start of feed after unit adjustment - Red/green status lights to indicate operational readiness - Minimum workpiece length: 380 mm - Conveyor belt width: 200 mm - Maximum workpiece width: 180 mm (260 mm with flip operation) Fedpfx Amevnv Uhs Soph - Workpiece height: 12–160 mm - Extraction connections: 4 x 100 mm and 2 x 80 mm diameter - Sensor-controlled tool air blast directly at the discs - Housing dimensions (L x W x H): 3065 x 1600 x 1900 mm - Total length: 4365 mm (including roller table with integrated workpiece width detection) - Weight: 1500 kg - Operating voltage: 400V, 50Hz, 3-phase, air connection 6 bar - CE compliant ----- Price for the above machine: on request! ----- Special accessories (with additional cost): Set of replacement flaps for Leistomat SD-200, consisting of: Surface units: 30 Strips EH45/200 - 7 (rollers) 30 Strips EH45/200 - 20 (rollers) Rabbet units: 96 Strips M55/120 - 4 SmartFlex flap disc Ø200 solid, with 30 grooves, 50 mm long Set of replacement flaps for SmartFlex flap disc, consisting of: 60 Strips M35/50 K 180-7 S Sanding paper disc VB for Softdisc, D=200 mm, grit 220, with Velour backing (Velcro), pack of 100 pieces Sanding paper disc VB for Softdisc, D=200 mm, grit 280, with Velour backing (Velcro), pack of 100 pieces ----- ...

Kondisi: sangat baik (bekas), Tahun pembuatan: 1991, nomor mesin/kendaraan: 211/91/1, Fungsionalitas: berfungsi sepenuhnya, arus masuk: 16 A, frekuensi input: 50 Hz, lebar meja: 750 mm, panjang meja: 2.700 mm, panjang total: 3.650 mm, lebar total: 850 mm, tinggi total: 2.300 mm, berat keseluruhan: 2.200 kg, tinggi angkat: 1.350 mm, lebar kerja: 750 mm, panjang benda kerja (maks.): 2.500 mm, lebar benda kerja (maks.): 750 mm, tinggi benda kerja (maks.): 1.300 mm, jenis penyesuaian ketinggian: listrik, kebutuhan tinggi: 2.300 mm, persyaratan ruang panjang: 3.650 mm, lebar yang dibutuhkan: 950 mm, panjang kerja: 2.500 mm, - Lamella - Press Korpus Fedpfx Ameyx Habj Soph - Area kerja: - Lebar dari 150 - 2.500mm, tinggi dari 150 - 1.300mm; kedalaman 750mm; - 2200 daN (kg) - Daya dapat diatur pada 85% + 70%. - Mesin sangat kokoh

Kondisi: bekas, Arbeitsbreite-von-bis-45-95-mm Fpsdpey Dh Sisfx Am Sjh

Kondisi: sangat baik (bekas), Tahun pembuatan: 1980, DE1710_2024-06 Fedpfxeyc N Eae Am Soph

Tahun pembuatan: 2007, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, REMONNAY edging and resawing machine type DR8/225, year 2007 7-position variable adjustment, each with 2 x 110 kW motors Pre-cut saws for side boards Cutting height: 225 mm S-single feed with feed roller table with turning and alignment table Fedsfcltgepfx Am Ssph Sliver separator with two lamellae Board cross conveyor Roller conveyor with pull-off device Electrical control cabinet with operator panel including all accessories (circular saws, etc.)