Beli Lamella bekas (121)

Kondisi: bekas, L&L Machinery Inc GLU-ALL Mesin Press Lamella Frekuensi Tinggi, meja 2700x1300 mm Fgjdpfxozcay Uj Am Sec Pengisian samping (sisi sempit) Dilengkapi dengan pengumpan otomatis dan konveyor rol keluar.

Kondisi: bekas, Tahun pembuatan: 2024, New demonstration machine! List price: €32,665,- complete in standard configuration including: Sturdy, torsion-resistant steel frame, welded and bolted construction – Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements – Lamella pressure beams with proven gap compensation (Ganner system) for tightly compressed carcass joints – Counter-pressure surfaces (side pressure wall, base) are continuous, 38 mm thick, coated support plates – Continuous pressure surface with 95 mm height on the lower vertical pressure beam – Electromotoric adjustment of both pressure beams via precision trapezoidal lead screws (with increased lead and run-out accuracy) and high-performance travelling nuts with grease reservoirs – Pressing action performed electromotorically via 2 separate worm gear motors (2 x 0.75 kW) – Pressing force for the pressure beams is infinitely variable electronically via 2 potentiometers and regulated by a frequency inverter, making the pressing force control entirely wear-free – Horizontal pressure beam pressing force min. 500 daN (kg), steplessly up to max. 2200 daN (kg) – Vertical pressure beam pressing force min. 300 daN (kg), steplessly up to max. 2200 daN (kg) – Press and adjustment speed of the pressure beams with fine positioning selectable by three-stage switch: 5 / 10 / 25 mm/second – Extremely simple operation via 6 separate push buttons, 8 motion sequences selectable via controller – Freely adjustable pressing time preselection with automatic opening, 0-30 min (switchable to seconds or hours) – Working height/loading height: 300 mm – Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm; Weight: approx. 1800 kg net; Dimensions (L x W x H): 3.45 m x 0.95 m x 2.30 m – Electrical connection: 400V, 3Ph, 50Hz (3.2 kVA, 16A) Additional equipment: Rapid-traverse speed for quick positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams; pressing speed 5 / 10 / 25 mm/sec and rapid-traverse speed 50 mm/sec. Sensors can be disabled for special components. 1 set of machine feet (working height 500 mm) Location: Fgjdpfx Ajuf Hx Hsm Ssc

Kondisi: belum diuji (bekas), Fungsionalitas: belum diuji, Panjang penutup lipat: maks. 3000 mm Lebar penutup lipat: maks. 700 mm Tekanan vertikal dapat diatur: hingga 8000 kg Fgedpfxexuf Dzj Am Sjc Tekanan horizontal: 2500 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2024, jam operasional: 50 h, Automatic slat production machine The automatic acoustic panel stapling machine is equipped with an advanced three-axis NC control system, ensuring exceptional precision and flexibility in the production process. Below are the specific advantages of each axis: 1. X Axis: Precise Horizontal Stapler Positioning - The X axis is responsible for the exact horizontal positioning of the staplers along the panel. This enables staples to be placed precisely at designated points, ensuring uniform stapling quality across the entire length of the panel, regardless of its size. 1. Y Axis: Vertical Movement - The Y axis enables vertical movement of the stapler, allowing panels to be stapled in different locations, regardless of their size or shape. This allows processing of panels with non-standard dimensions while maintaining full precision. 1. Z Axis: Depth and Stapling Force Control - The Z axis manages the depth and force with which staples are driven into the panel. This allows the process to be tailored to the thickness and hardness of the material used in the acoustic panel. Consequently, the staples are anchored with optimal strength, ensuring product durability and aesthetics, while minimizing the risk of material damage. ### Automatic Re-Tooling Automatic retooling is one of the key features of the stapler, significantly impacting production efficiency. This function allows: - Fully automatic retooling of the X, Y, and Z axes. ### Production Process Optimization Integration with production management systems such as MES (Manufacturing Execution System) and ERP (Enterprise Resource Planning) enables: 1. Full Control over the Production Process: - Through MES and ERP integration, complete control over every stage of production is possible. Fsdpfx Amjy Sw I No Sogc 2. Optimization of Media and Material Consumption: 3. Production Planning Optimization: ### Significant Reduction in Operator Workload Automation of the acoustic panel stapling process has a direct effect on reducing the workload of shop-floor staff: - Elimination of manual control necessity - Increased work efficiency ### Capability for Media Demand Analysis Algorithms Thanks to advanced integration with production management systems, the stapler enables the creation of algorithms that analyze production media demands: 1. Media Demand Analysis: 2. Adapting Production to Changing Conditions: ### OEE (Overall Equipment Effectiveness) Analysis The stapler also serves as a tool for advanced OEE analysis, a key operational efficiency indicator: 1. Comprehensive Production Monitoring: 2. Automatic OEE Calculation: - The MES system automatically calculates the OEE value based on collected data, allowing immediate assessment of the stapler's performance. This tool enables rapid identification of areas needing optimization, such as downtime reduction, product quality improvement, or increased machine efficiency. 3. Early Detection of Problematic Areas: 4. Production Planning Optimization: ### TPM (Total Productive Maintenance) and Automated Technical Condition Monitoring The stapler also supports the implementation of TPM philosophy, focusing on maximizing machine efficiency and reliability…

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 2860 x 1140 x 1100 mm Weight: 1070 kg Total power requirement: 19 kW Lamella Band Saw HP-11-PB-300 SMART DELUXE - Max. workpiece dimensions: 300 x 250 mm - Min./max. distance from saw blade to conveyor belt: 4 - 125 mm - Conveyor belt width: 285 x 5470 mm - Wheel diameter: 711 x 51 mm - Min. workpiece length: 200 mm - Feed speed, infinitely adjustable: 0 - 16 m/min - Saw blade dimensions: 4267 x 51 mm - Main drive motor: 15.0 kW - Hydraulic motor: 2.2 kW - Lifting mechanism motor: 1.5 kW - Voltage: 400 V / 50 Hz - Extraction port: 4 x 100 mm - Including workpiece return system - Cooling unit - Pneumatic infeed hold-down roller with shock absorber - Pneumatic pressure roller for precise sawing - The combination of a thin saw blade and precise blade guide allows for production of extremely thin lamella thicknesses - Min. lamella thickness: 1.0 - 2.0 mm - Smooth, gluable cut surface - Saw kerf: 1.2 - 1.6 mm (50% material savings) - Cutting accuracy: +/- 0.5 mm - PLC control with user-friendly touchscreen operation - Servo-pneumatic blade tensioning regulates blade tension via a servo valve, adapted to each specific blade - Ammeter for monitoring chip removal - Ideal machine for resawing engineered flooring and panel boards Shipping dimensions with pallet: Fgedpfx Amovz Hfds Sjc Frame: 2180 x 1140 x 1100 mm / 850 kg Conveyor: 2860 x 560 x 550 mm / 250 kg - Total weight: 1070 kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 2860 x 1120 x 1140 mm Weight: 1260 kg Total power requirement: 19 kW Lamella Band Saw HP-11-PB-400 DELUXE - Maximum workpiece dimensions: 400 x 250 mm - Min./Max. distance from saw blade to conveyor belt: 4 - 125 mm - Conveyor belt size: 385 x 5480 mm - Wheel diameter: 711 x 51 mm - Minimum workpiece length: 200 mm - Feed speed, steplessly adjustable: 5 - 25 m/min (standard: 15 m/min, optional: 25 m/min) Fsdpfevz E Spex Am Segc - Saw blade dimensions: 4470 x 50 x 0.90 mm - Main drive motor: 15.0 kW - Hydraulic motor: 2.2 kW - Height adjustment motor: 1.5 kW - Voltage: 400 V / 50 Hz - Extraction ports: 4 x 100 mm - Cooling unit - Pneumatic hold-down roller at infeed with shock absorber - Pneumatic pressure roller for precise cutting - The combination of a thin saw blade and precision blade guidance enables the production of extremely thin lamella thicknesses - Min. lamella thickness: 1.0 - 2.0 mm - Smooth, glue-ready cut surface - Saw kerf: 1.2 - 1.6 mm (50% material saving) - Cutting accuracy: +/- 0.5 mm - PLC control with user-friendly touchscreen interface - Servo-pneumatic saw blade tensioning adjusts blade tension via servo valve, adapted to the respective saw blade - Ammeter for monitoring chip removal - Ideal machine for cutting floorboards and panels Transport dimensions with pallet: Frame: 2180 x 1120 x 1140 mm / 1000 kg Conveyor belt: 2860 x 640 x 740 mm / 260 kg - Weight: 1260 kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 2216 x 1857 x 2488 mm Weight: 900 kg Total power requirement: 15 kW Lamella Band Saw SC-800 - Roller diameter: 800 mm - Max. cutting height: 400 mm - Working table: 1290 x 800 mm - Minimum lamella thickness: 2 mm - Tolerance: +/- 0.15 mm - Saw blade width max.: 54 x 0.9 mm - Saw blade length min./max.: 5530/5380 mm - Motor power: 15 kW - Voltage: 400 V, 50 Hz - Feed motor power: 0.37 kW - Feed conveyor height: 300 mm - Feed conveyor stop length: 750 mm - Pressure roller diameter: 160 mm - Feed conveyor to saw blade pass-through width: 200 mm Fgsdpfxov A Hhnj Am Sec - Saw blade to pressure roller pass-through width: 200 mm - Infinitely variable feed speed: 0–30 m/min - Manual fence positioning with digital display - Automatic star-delta switch - Pneumatic wheel brake - Upper and lower saw blade guide - Upper saw blade guide adjustable via rack and pinion - Automatic hydraulic blade tensioning - Blade tension display - Lubrication device for cleaning and cooling the saw blade - Includes saw blade 5530 x 54 x 0.9 mm, tooth pitch 20 - Extraction nozzle: 2 x 120 mm, 1 x 100 mm - Compressed air connection: 6 bar - Air consumption: 27 L/min - Dimensions: L=2126, W=1857, H=2488 mm - Weight: 900 kg

Kondisi: baru, Tahun pembuatan: 2025, en1 Fjdpfsvz Hcisx Am Sjgc

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, horizontale-duennschnitt-bandsaege-3-koepfe Fsdpfx Amsvwbg Uo Sjgc

Kondisi: baru, Main features of the machine: The TOP CUT 650 band saw delivers high-quality features and broad capabilities, particularly for companies involved in wood processing at any scale. The machine ensures unmatched stability and robustness. Fgsdpeii Rydsfx Am Sec - Touch panel with electronic display of cutting height - Control panel located at the front of the machine for easy and convenient operation - Cutting thickness controlled and programmed electronically - Cutting unit lifted by two pistons with motorized drive - Infeed and return conveyors driven by hydraulic variator - Hydraulic band tensioning system - Pneumatic blade lubrication system - Pneumatic pressure roller system ensures accurate guidance - Stable steel machine frame guarantees precise operation - Cutting accuracy and repeatability up to 0.01 cm Technical specifications: Maximum workpiece dimensions: 650 x 300 mm Transport belt width: 625 mm Transport belt length: 5535 mm Maximum cutting height: 300 mm Minimum workpiece height: 5 mm Return belt dimensions: 5460 x 330 mm Saw wheel diameter: 710 mm Saw wheel width: 45 mm Dust extraction port diameter: 100 mm Feed speed: 0 - 7 m/min Saw blade dimensions: 5200 x 35-55 x 1.6 mm Voltage: 380 V Main motor power: 22 kW Total power: 25 kW Weight: 2600 kg Dimensions: 2800 x 2400 x 2000 mm

Tahun pembuatan: 2014, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Wir bieten zum Verkauf an: Bonded Panel Technology LTD (Duemas) – Lamella Cutting System für Mineralwollplatten inklusive kompletter Absauganlage, Baujahr 2014, in sehr gutem technischen Zustand. Das System wurde für das präzise Schneiden von Mineralwollplatten in Lamellen mit variabler Stärke von 40 mm bis 200 mm entwickelt und ist damit ideal für Hersteller von Sandwichpaneelen und Dämmstoffen. Das System umfasst: - Lamellensäge mit 35 Sägeblättern Ø550 mm (davon 15 neue Sägeblätter, originalverpackt) - 2 Schwerkraft-Förderbänder à 3 Meter - Zusätzlich Hauptwelle (insgesamt 2 Wellen) - Kompletter Satz Abstandshalter und Oberplatten für 40, 50, 60, 80, 100, 120, 150 und 200 mm Fgsdpfxsyk Dmnj Am Ssc - Komplette Absauganlage mit 15 kW Auto Shaker Filter - Rohre und Anschlüsse vollständig enthalten Wesentliche technische Daten: - Maximale Plattenbreite: 1.010 mm - Maximale Plattendicke: 200 mm - Hauptmotor: 15 kW - Stromversorgung: 415V, 3-phasig - Ca. 3.000 Betriebsstunden (2014–2019) Die Anlage ist sehr gut gewartet und befindet sich in einem hervorragenden Betriebszustand. Sofort verfügbar.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SÇ 450 ALÜMİNYUM VE PVC PANJUR KUTU VE LAMEL KESİM MAKİNASI ( Ø550 mm ), • Dirancang untuk pemotongan massal lamela penutup jendela dalam bentuk paket, pemotongan serentak kotak penutup jendela, pemotongan pilar samping, dan pemotongan serentak kotak penutup monoblok. • Pemotongan permukaan bersih berkat kecepatan putar gergaji yang tinggi • Sistem konveyor rol kanan dan kiri, masing-masing 3 meter x 2 unit • Kecepatan pemotongan gergaji dapat disesuaikan • Semua kotak penutup jendela, termasuk kotak hingga maksimum 350 mm, dapat dipotong • Pemotongan presisi berkat sistem rel linear • Diameter mata gergaji Ø550 mm OPSIONAL Fsdporamzfefx Am Segc • Sistem pendinginan • Dapat beroperasi dengan meter digital

Kondisi: bekas, Window gasket, cutting machine, seal cutter, pneumatic slat cutter, blind cutting device - Slat cutter: for PVC and aluminum blinds, pneumatically operated - Pneumatic components manufacturer: Festo - Dimensions: 680/340/H470 mm - Weight: 55 kg Fsdpfx Aof Sgwnem Sogc

Kondisi: baru, Main features of the machine: The TOP CUT 500 bandsaw offers high-quality performance and extensive capabilities, particularly suited for companies engaged in woodworking on various scales. The machine delivers unparalleled stability and robust construction. - Touch panel with an electronic display of cutting height - Control panel positioned at the front of the machine for easy and convenient operation - Cutting thickness electronically controlled and programmable - Cutting unit lifted by two pistons with motorized drive - Infeed and return conveyor belts driven by a hydraulic variator - Hydraulic band tensioning system - Pneumatic lubrication for the saw band - Pneumatic pressure roller system ensures accurate guidance - Stable steel machine frame guarantees precise operation - Cutting accuracy and repeatability up to 0.01 cm Technical Data: Maximum workpiece dimensions: 520x300 mm Fgedpfxeiim Tqe Am Ssc Conveyor belt width: 495 mm Conveyor belt length: 5535 mm Maximum cutting height: 300 mm Minimum workpiece height: 5 mm Saw band wheel diameter: 711 mm Saw wheel width: 45 mm Extraction port diameter: 100 mm Feed speed: 0 - 13 m/min Saw blade dimensions: 5200 x 35-55 x 1.6 mm Voltage: 380 V Main motor power: 18.5 kW Total power: 21.5 kW Weight: 2,400 kg Dimensions: 2800 x 2400 x 2000 mm

Kondisi: bekas, System: Inclined Clarifier, Lamella Clarifier, Lamella Separator Condition: Used, up to 120 m³/h depending on medium Design: Robust, high-performance construction Material: Stainless steel on container frame, 30' container, scraper plates in PP (polypropylene) Dimensions (LxWxH): 7580 x 2435 x 3000 mm Weight: approx. 8,000 kg Principle: Wastewater is fed into the inlet of the inclined clarifier and flows downward. Due to the arrangement of the lamella plates in the clarifier, the wastewater is redirected underneath the plates and flows upward through the lamellas. As a result, solids settle down onto the lamella plates. The clarified water is transported to the outlet. Solids on the lamella plates gradually slide down along the plates, where the sludge hopper is located. Fjdpfx Amsppyhtj Sjgc Rake Mechanism: Optionally, we offer the inclined clarifier with a rake mechanism to keep the sludge fluid. Application: Separation of solids and liquids by sedimentation. Inclined clarifiers are often used as a pre-stage before filter presses or decanters for thickening. Pre-thickening of thin sludge allows the filter press to be sized smaller in terms of filter area. The system is in good condition and available for rent or sale. Inspection at our plant is possible by appointment. We also offer new inclined clarifiers with a delivery time of approximately 8 to 10 weeks!

Kondisi: bekas, Inclined clarifiers, 2 identical units: • Manufacturer and year of construction unknown (presumably late 1970s) Fedpfot Ay Scjx Am Sjgc • Rectangular design, equipped with extraction screws leading to the hopper • Dimensions: length 9700 mm, width 3500 mm, height 6100 mm

Kondisi: baik (bekas), System: Inclined Clarifier Condition: Used, up to 80 m³/h Application: Separation of solids and liquids by sedimentation. Inclined clarifiers are often used as a preliminary stage before filter presses for thickening purposes. By pre-thickening a dilute sludge, the required filter area of the filter press can be reduced, allowing for a more compact design. Fedpfx Aob D Etkom Sjgc The system is in good condition and is available for both rental and purchase. An inspection at our facility is possible by appointment.

Kondisi: baik (bekas), Manufacturer: KEMMLER+RIEHLE Dimensions: 2000 x 1700 x 1000 mm Belt dimensions: 2000 x 1280 mm Fodpfsh A N E Hsx Am Sogc Speed: 11 m/min Electrical data: 380 V; 1.5 A; 0.55 kW

Kondisi: baik (bekas), Tahun pembuatan: 2011, Manufacturer: Bonino Model: 37458 Weight: 230 kg Dimensions: 2300 x 1000 x 2900 mm Year of manufacture: 2011 Fsdepl T A Espfx Am Sjgc Electrical data: 400 V; 50 Hz; 0.7 A; 0.18 kW Belt size (lamellar): 180 x 2300 mm Input size: 210 x 210 mm Discharge height: 1850 mm It features a track with active cooling.

Kondisi: baik (bekas), Tahun pembuatan: 2006, Manufacturer: TECNO VIBRAZIONI - Year of manufacture: 2006 Fedpfx Amepl Ttcs Segc - Model: 28482 - Dimensions: 2100 x 900 x 2900 mm - Belt width: 200 mm - Infeed size: 700 x 700 mm - Discharge size: 200 x 130 mm - Conveyor speed: 6.0 m/min - Electrical data: 400 V; 0.18 kW; 0.7 A

Kondisi: diremajakan ulang (bekas), HOT PLATEN HYDRAULIC PRESS, MODEL LS/L/R 30/13, PLATEN THICKNESS 150 mm Configuration - LOADER - HOT PLATEN HYDRAULIC PRESS, MODEL LS/L/R 30/13, PLATEN THICKNESS 150 mm - IDLER ROLLER UNLOADER, 3000x1300 mm Fgodpfxjn R Dihe Am Ssc Platen dimensions: 3000x1300 mm Pressing cylinders: 6 units, Ø 70 mm, stroke 200 mm Pressing force: 70 tons

Kondisi: bekas, Ventilation duct, ventilation damper, ventilation system, filtration system, chip extraction, dust extraction, extraction unit, ventilation ducts and fittings, louver damper, backdraft damper, louvered ventilator -Ventilation damper: louvered ventilator, louver damper -Ventilation dampers: mechanically adjustable, without actuator -Opening with 6 louvers: 1170 x 510 mm Fsdpfx Amsharupj Ssgc -Overall dimensions: 1325/560/H115 mm -Weight: 21 kg

Kondisi: sangat baik (bekas), CATALOG NO. 7221 TECHNICAL DATA - Min / max width of workpiece: 45 / 150 mm - Min / max height of workpiece: 15 / 50 mm 3 spindles: 1) Bottom horizontal 11 kW 2) Top horizontal 22 kW (7000 rpm) 3) Bottom horizontal 5.5 kW Spindle diameter: 40 mm - Spindles 1 and 3 manually adjustable up/down, left/right - Spindle 2 manually adjustable left/right - Spindle 2 electrically adjustable up/down - Spindles 2 and 3 equipped with brakes From the top: - 3 infeed feed rollers, metal, toothed - 1 double outfeed feed roller, rubber coated From below: - Infeed pressure unit - Ribbed table surface - Feed roller, metal, smooth - Electric thickness adjustment - Stepless feed speed adjustment 6-24 m/min - Feed motor 3 kW - Feed via cardan shaft - Infeed table length 1970 mm - Automatic table lubrication system - Extraction connector diameter 1x150 mm, 2x140 mm - Dimensions (LxWxH) 3070x2000x1800 mm - Weight 2000 kg ADVANTAGES – German-made – With 3 cutterheads – Suitable for lamella processing – Ribbed table – Cutterheads included – Unpainted – Very good condition – Used planer Fedpfxjzccb Ue Am Ssgc Net price: 125,900 PLN Net price: 29,980 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Kondisi: diremaj di bengkel (bekas), Slot spindle 1 pc Number of milling units: 4 pcs Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 CNC – spindles CNC-controlled, radial and axial ----- Machine was factory overhauled by Weinig in 2024. During the overhaul, the control system was also updated to Siemens S7 677 C Fjdpfxoxpi Duo Am Segc with a new “Touch” membrane panel. Equipped with the following machining units: Cross-cut saw ----- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 rpm axial adjustment via NC axis radial adjustment pneumatically in 8 positions for edge rounding from above Bottom-mounted edge rounding unit ----- axial adjustment together with the cross-cut saw Tenoning and slotting spindle ----- motor power 15 kW spindle diameter 50 mm spindle speed 2,925 rpm tool swing diameter min. 380 mm, max. 400 mm tool clamping length 640 mm axial adjustment via CNC axis axial adjustment travel 580 mm axial adjustment speed 100 mm/sec 1st profile spindle (climb and conventional milling) ----- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis 2nd profile spindle ----- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis Horizontal profile milling unit (top) ----- motor power 3 kW spindle diameter 40 mm spindle speed 9,000 rpm pneumatic adjustment in 8 axial and radial positions Vertical profile milling unit (right side at machine outfeed) ----- motor power 3 kW spindle diameter 40 mm spindle speed 5,850 rpm pneumatic adjustment in 8 axial and radial positions Additional equipment: ----- CNC-controlled length stop, mounted on slotting table, for workpiece lengths up to 3500 mm, incl. cross-cut saw position integrated in control. Studio sash window device, swiveling ±60° Twin part package with automatic singulation and transfer Climb milling facility with window automation for window rebating Rebating cart for rebating of small sash widths Climate unit in control cabinet PC control NEXUS Automatic turning system Lamella conveyor, incl. return belt for transporting workpieces back to operator (Technical data according to manufacturer – no liability accepted).

Kondisi: baru, Tahun pembuatan: 2026, Gannomat Concept 70 Eco Lamella Body Press with Rapid Traverse Technical Data: Lamella body press from our showroom Working range: width from 150 - 2,500 mm, height from 150 - 1,400 mm, depth 700 mm - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with industry-proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the pressure beams is continuously electronically controlled via 2 potentiometers and set via a frequency inverter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beam min. 500 daN (kg) up to continuously adjustable max. 2200 daN (kg) - Pressing force for vertical pressure beam min. 300 daN (kg) up to continuously adjustable max. 2200 daN (kg) - Includes option: Rapid traverse speed for quick positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speed 5/10/25 mm/sec and rapid traverse speed 50 mm/sec. The sensors can be switched off for pressing special parts. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45-degree carcasses. Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm Machine is available for immediate delivery from our showroom. Fgsdpfey Egz Sox Am Sjc Location: Ex stock 54634 Bitburg - Immediately available -