Beli Lamella bekas (153)

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 402594, jenis arus masuk: tiga fasa, tegangan masuk: 400 V, lebar kerja: 2.500 mm, daya: 30 kW (40,79 hp), Perlengkapan: Penandaan CE, en Bwjdpfx Ahjxlnpzs Usw

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, kecepatan maksimum: 7 km/j, warna: kuning, berat keseluruhan: 1.500 kg, Perlengkapan: komputer bawaan, pencahayaan, EN-McCONNEL-ROBOCUT-T500 DEMONSTRATION UNIT - Remote-controlled embankment mower. - Low weight, low centre of gravity in the middle of the vehicle. - Active tracked drive with 4 movable rollers underneath and 1 roller above. - Hardened gears on the drive side. - Front track guidance with guide blocks. - External rubber tracks: 250 mm wide. - Rubber tracks with deep grooves and A/S profile. - Hydraulic track tensioning via grease gun with pressure gauge. - Removable belly plate. - 3-cylinder Perkins diesel engine, 37 kW / 50 HP. - Base machine weight (without attachments): 1,250 kg - Fuel tank: 21 liters. - Oil tank: 18 liters – 28 liters in the circuit. - 8 liters of SAE J 1036 (or equivalent) coolant present in the machine - 2-speed fully hydrostatic stepless drive. - Travel speeds: 0 – 4 km/h and 0 – 7 km/h. - Cutting height adjustable in 5 steps. - Hydraulic lift: -300 mm to +400 mm. - Mower rotor floating position left/right 14 degrees. - Engine permanently mounted; cannot be rotated. Bwedpfxeu Rurue Ah Usw - Oversized oil sump. - Engine approved for operation on slopes up to 55 degrees. - Modified lubrication system for use on slopes. - Electronics mounted separately from the engine (no vibration impact). - Cooling system mounted completely at the rear, away from dust and dirt. - Combined cooling system: engine radiator and oil cooler together. - Standard spiral fan, operable via remote control. - Lamella rotation via hydraulics. - Standard machine-mounted safety features with alarm function: - Shutdown if no oil pressure on engine. - Standstill function if contacts not working. - Clogged filter indicator - High engine temperature indicator - Oil and diesel fluid indicator. - Machine equipped with emergency controls in case the machine or radio remote control fails. - Brake system on track drive motors; if the machine is not operated, the brakes are applied. - Low ground pressure - VARIOUS ATTACHMENTS AVAILABLE SUCH AS GRASS ROTOR, STUMP GRINDER, FORESTRY ROTOR ETC. - PRICE QUOTED IS FOR BASE UNIT WITHOUT ATTACHMENTS.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Horizontal thin-cut bandsaw 300 mm working width 22.0 kW saw motor Bwjdpfx Ahexc Ea Sj Uew New 2025 model with larger wheels – adjustable tilt up to 12 degrees Touchscreen and PLC from Schneider Larger wheels for higher cutting speed Frequency inverter on the wheels for adjustable cutting speed Suitable for lamellae from 2 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, ketinggian potong (maks.): 80 mm, berat keseluruhan: 1.500 kg, diameter mata gergaji: 280 mm, tegangan masuk: 400 V, Gergaji lamela bertenaga tinggi buatan Swedia. Dilengkapi dengan motor 30 kW. Pisau gergaji tambahan dan cincin spasi termasuk dalam paket pengiriman. Kondisi sangat baik, lebar balok 200 mm. Transportasi ke seluruh Eropa dapat diatur dengan harga yang baik. Bjdpfxoxg N Emj Ah Uoww

Kondisi: baru, Special promotional price for in-stock items! Only while stocks last! Price net ex works, loaded free on truck. The machine is supplied without base frame. Base frame BF3 Deluxe is available separately under item no. 56-1017. Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Max. shell end mill: 80 mm Throat: 220 mm Spindle speed (12): 75 - 3200 rpm Spindle taper: MT 4 Quill stroke: 125 mm Table size: 800 x 240 mm Travel (x / y): 555 / 225 mm Milling head swivels: -90° to +90° Distance spindle / table: 60 - 485 mm Bededh Hbcopfx Ah Usww Milling head height adjustment: 425 mm T-slot size: 14 mm Motor output S1 100%: 1.1 / 1.5 kW (400 V) Motor input S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H)*: 1140 x 770 x 1500 mm Approx. weight: 287 kg * without base frame Features: - Quick and easy speed change with gear selector switch - Versatile applications: drilling, milling, tapping, etc. - High running smoothness thanks to precision-ground, oil-bath lubricated gears - Forward and reverse operation for tapping - Quill adjustment via lever, fine feed via handwheel - Dovetail guides for x-, y-, and z-axis, adjustable via gib strips - Milling head swivels to both sides for angle drilling, bevel milling, etc. - Large, heavy-duty cross table, precision-machined surface - Excellent price-performance ratio for cost-conscious users Scope of delivery: Keyless drill chuck 3 - 16 mm / B 16 Drill chuck arbor MT 4 / B 16 Drawbar M 16 Reducing sleeve MT 4 / 3 Combined shell mill arbor MT 4 / 27 mm Height-adjustable safety guard Tapping device LED machine lamp Digital quill stroke display Lamellar safety guard Longitudinal measuring scale Operating tools

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Panel Dividing System PA 4115 – 3100 x 3100 DNC-AT Condition: completely overhauled Warranty: 1-year guarantee Technical Specifications: Left-side adjustable angle stop according to AGA 4383 Longitudinal Panel Saw FM 16-3100: - Hardened guides - Automatic forward and return travel of the saw unit - Return travel with automatic lowering - Feed speed: 2–50 m/min (stepless via potentiometer) - Return speed: 70 m/min (rapid traverse) - Integrated extraction channels in machine base and pressure beam - Scoring saw adjustable from outside (no need to open safety cover) Saw Unit with Regulated DC Drive: - Precise positioning (e.g. for cut-outs) - Slowed immersion exit from the cut - Includes safety cover interlock, lamella curtain SZ 5008 - Offcut device SP 5004 – offcuts down to min. 5 mm - Main saw motor: 7.0 kW - Scoring saw motor: 1.1 kW (individually switchable) - Cutting length: 3100 mm - Cutting height: 70 mm - Dust tested: threshold value of 2 mg/m³ significantly undercut - CE compliant Angle Pressure Device WP 5003: - With pressure claw for cross cuts - Adjustment range up to 2400 mm - Semi-automatic function Material Feed Table HP 5021 (mounted at rear of FM 16): - Parallel fence with 6 spring-loaded clamping fingers - Direct drive of material pusher by servomotor - Table surface closed with Pertinax plates (suitable for narrow strips) - Feed speed: 25 m/min (safety restricted) - Return speed: 40 m/min - Table length: 3100 mm - Fence depth: 3100 mm Multi-microprocessor control - Integrated PC with hard drive - Operating system: LINUX - Interfaces: serial + parallel, USB - Network connectivity (including wireless LAN) - Optimize cutting plans in the office and send directly to machine - Multitasking capable - Print function via USB - Remote maintenance via Internet (Remote Desktop, TeamViewer) - Multilingual dialog programming - 15” flat screen + multifunction keyboard - Swiveling control panel - Graphical display of cutting plans and workflows Additional Features: Angle stop table HP 5043 (front-mounted): Bwedoxhg Ibopfx Ah Usw - Machined steel angle, Pertinax table support - Table size: 1800 × 800 mm Workpiece support table HP 5025 (front-mounted): - Pertinax support - Table size: 1800 × 800 mm Air cushion device LK 5030 - Integrated into HP 5043 and HP 5025 Accessories: - 1 circular saw blade KSB 4005 – Ø 305 mm, Z=60 (for main saw) - 1 circular saw blade KSB 4006 – Ø 200 mm, Z=60 conical (for scoring saw)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, tahun perombakan terakhir: 2022, Dijual satu lini produksi BSH lengkap. Instalasi terdiri dari komponen dari System TM (bagian pengumpan), Keilzinken Technik NKT, automasi HIT (gudang bertingkat, transportasi, stasiun perbaikan pengumpanan lamella, mesin serut dan Kallesoe, dll.). Mesin serut dari REX: serut awal, serut lamella dan serut finishing. Mesin press frekuensi tinggi dari Kallesoe. 2 silo. Bwjdpswgcchofx Ah Ujw

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1791, MATEC 30HV/NC X = 2,000 mm Y = 825 mm Z = 800 mm / horizontal Z = 675 mm / vertical Bsdpexg D Atofx Ah Usww - 1-axis CNC swivel head Swivel radius 300 mm, swivel angle max. +/- 105 degrees Direct position measuring system +/-3, optionally continuous or indexable with clamping Clamping forces: 2,400 Nm unclamped, 4,200 Nm clamped - Electronic handwheel (portable) - Telephone diagnostics / remote maintenance - Tool magazine with 48 positions - Auxiliary tool magazine with 216 positions Stationary tool magazine for loading the internal tool changer of the machine tool. Includes - Linear and rotary axes with drives - Controllers and sensors - Gripper for SK40 tool holders - Sheet steel housing - 6 tool levels for storing 216 tools with SK40 holders D=80 mm or D=160 mm with free adjacent position, including 40 pieces with L=430 mm 64 pieces with L=260 mm 112 pieces with L=160 mm Maximum tool weight 10 kg - Tool loading and unloading via a tool access door - Transfer to the machine via double gripper - Tool data input at the machine control panel, selection of tool positions via the auxiliary magazine control panel - Option: Control panel for tool data input at the auxiliary magazine - Additional charge for motor spindle 9,000 rpm Motor spindle with 30 kW (40% duty cycle) 17 kW (100% duty cycle) Torque 191 Nm (40% duty cycle) 108 Nm (100% duty cycle) - Internal coolant supply 20 bar - Internal coolant supply 40 bar - Compressed air at external nozzles - IK compressed air through the tool - Rotoclear - Automatic safety doors - HOWIMAT CNC 220.2/TMI-50 rotary table 1-axis precision indexing device with direct drive Indexing accuracy deviation max. +/-10 seconds Radial/axial run-out deviation max. +/- 0.003 mm - Single rotary union for rotary table or counter bearing - Zero-point clamping system integrated into the machine table, without draw studs and cover - Tool breakage monitoring - Fully enclosed working area with roof - Bellows with steel lamellas - Direct position measuring system X, Y, Z axes - Chip conveyor - Rinsing nozzle - Centralized oil lubrication - Work area lighting - Mounting elements

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2007, The single-spindle PDFD finger jointing line consists of two main devices: the DFC 60M tenoning and finger jointing machine (for machining the ends of lamellas) and the PHSL lengthwise finger jointing press, where the elements are joined into lamellas up to 6.6 meters long. Input package width for the tenoning and finger jointing machine: 650 mm Width of the glued elements: 30 ÷ 155 mm Length of the glued elements: 170 ÷ 900 mm Thickness of the glued elements: 20 ÷ 70 mm Compressed air demand: 18 m³/h Bedpow Hrm Nsfx Ah Usww Working efficiency: approx. 2 cycles/min. (lamella 6600) Length of the finished, glued element: up to 6600 mm The machine is in excellent technical condition!

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, nomor mesin/kendaraan: 0-256-23-1012, Operating hours read: 361.69 h Working width: 1350 mm Wide belt sanding belt width: 1350-1380 mm Wide belt sanding belt width H/X: 1370 mm Cross belt sanding belt width: 150 mm Belt change side: left Working height: 900 mm Workpiece thickness: 3-160 mm Feed speed: 2.5 – 13 m/min Bwodpfx Aov T Nnfoh Uew Workpiece detection: High-precision workpiece detection in 12.5 mm grid; multiple feeding of complex part shapes Units: 1. Cross unit (1350 mm) (T3/5), Continuously variable, frequency-controlled cutting speed 2–16 m/s, MPS 2.0 Plus (1350 mm) Electro-magnetic segmented pressure beam Drive motor 13.5 kW 2. X-unit (1350 mm) (T3/5) With internally running slatted belt and steel contact roller for mounting a segmented pressure beam with three selectable options: - Calibration sanding with profiled contact roller - Veneer and lacquer sanding without slatted belt - Veneer and lacquer sanding with slatted belt Continuously variable, frequency-controlled cutting speed 2–18 m/s, MPS 2.0 Plus (1350 mm) Electro-magnetic segmented pressure beam Drive motor 18.5 kW 3. U-unit (1350 mm) (T3/S/7/9): Universal unit for mounting round brushes on an interchangeable frame and disc brush cassettes. Terminal-controlled adjustment of brush infeed and thus immersion depth, continuously variable frequency-controlled brush oscillation 36–240 strokes/min, switchable Direction of rotation with or against the feed Drive motor 15 kW Cutting speed 130 – 1000 2 trolleys for easier changing of brush units on interchangeable frame (service trolleys for U-unit) 1 structuring brush, diameter 300 mm 1 satin finishing brush, diameter 300 mm 4. Brush unit with structuring brush Drive motor 5.5 kW Brush material - Anderlon K 80 Diameter 150 mm Integrated cleaning system: Ionization unit with 16 rotating nozzles, with extraction nozzle Abrasive belt dimensions: 1370 x 2150 mm Vacuum clamping system: 5.5 kW, vacuum blower integrated in machine Machine control: Terminal touch screen Additionally: 2 x roller conveyors each L=3000 mm, W=1300 mm Various sanding belts P24-P100 (approx. 50 pieces); extraction piping; mobile sanding belt holder (6 arms) Operating voltage: 400 V, 50 Hz Space requirements L x W x H: 2566 mm x 2100 mm x 2415 mm Weight: 5500 kg Machine dimensions: 2600 x 2030 x 2000 mm Location: 32683 Barntrup

Kondisi: baru, The machine is supplied without a base frame. The BF3 Deluxe base frame is available separately under item no. 56-1017. Bwodpfx Ahov N Uyrs Ujw Technical data: Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Max. face mill diameter: 80 mm Throat depth: 220 mm Spindle speed: (12) 75 - 3200 rpm Spindle taper: MT4 Quill travel: 120 mm Quill feed: (3) 0.10 / 0.18 / 0.26 mm/rev Table size: 800 x 240 mm Travel (x / y): 555 x 205 mm Milling head swiveling: -60° to +60° Spindle-to-table distance: 95 - 485 mm Milling head height adjustment: 390 mm T-slot size: 14 mm Lifting motor: 90 W Motor output S1 100%: 1.1 / 1.5 kW (400 V) Motor rated input S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions: 1140 x 970 x 1460 mm Approx. weight: 322 kg Scope of delivery: - 3-axis digital readout ES-12 V with LCD display - Quick-action drill chuck 3 – 16 mm / B 16 - Drill chuck arbor MT4 / B16 - Drawbar M16 - Reducing sleeve MT4 / 3 - Combined shell end mill arbor MT4 / 27 mm - Height-adjustable safety guard - Automatic quill feed - Lifting motor for milling head - LED machine lamp - Digital quill stroke indicator - Tapping device - Lamellar safety guard - Longitudinal measuring scale - Operating tools Without base frame.

Kondisi: baik (bekas), Segi Empat Penjepit N2 terbuat dari besi cor G25 dengan struktur lamel. Bedpfstyyl Esx Ah Usww Dengan bidang vertikal, dikerjakan dengan alur-T atau titik nol, ortogonal terhadap basis penyangga sesuai standar DIN 875. UKURAN: 1595x1000x850mm, digiling sesuai DIN 876/II, dengan alur-T 22H12 DIN 650 dengan jarak 175mm.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, panjang mata gergaji pita: 5.550 mm, lebar pita gergaji: 80 mm, jenis arus masuk: tiga fasa, ketinggian potong (maks.): 400 mm, lebar meja: 1.060 mm, panjang meja: 800 mm, tinggi kerja: 400 mm, tegangan masuk: 400 V, pl-hu-001 Bwsdpfow H Rq Hex Ah Ujw

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1786, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 825 mm, jarak gerak sumbu Z: 1.100 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, produsen pengendali: Siemens, model controller: Sinumerik One, beban meja: 1.500 kg, diameter meja putar: 800 mm, kecepatan rotasi (min.): 25 rpm, kecepatan spindel (min.): 20 rpm, kecepatan spindel (maks.): 15.000 rpm, pasokan pendingin: 20 batang, jumlah spindel: 1, panjang alat: 460 mm, diameter alat: 200 mm, berat alat: 10.000 g, tegangan masuk: 400 V, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, MATEC-30HV X = 3,000 mm Y = 825 mm Z = 1,100 mm / Horizontal Z = 975 mm / Vertical - 1-axis CNC swivel head Swivel radius 300 mm, max. swivel angle +/- 105 degrees Absolute measuring system +/-3, selectable as either continuous or indexable with clamping Clamping forces: 2,400 Nm unclamped, 4,200 Nm clamped Bodpfxoxg Dhcs Ah Ueww - Bellows with steel lamellae - Absolute measuring system for X, Y, Z axes - Chip conveyor - Rinsing pistol - Centralized oil lubrication - Workspace lighting - Control: Siemens Sinumerik ONE Modern CNC system for highly productive machine tools, comprising: NCU 1740 22" ITC2200 V3 display Machine control panel MCP 2200 - Electronic handwheel (portable) HT2 - Telephone diagnostics / remote maintenance - Motor spindle 15,000 rpm Motor spindle with 30 kW (40% duty cycle) 17 kW (100% duty cycle) Torque 191 Nm (40% duty cycle) 108 Nm (100% duty cycle) - Internal coolant supply 20 bar Tank capacity of paper filter system: 900 l Filter capacity: 160 l/min - High-pressure coolant at external nozzles High-pressure coolant pump switchable via M function in the part program to the external nozzles on the spindle head. #20 bar# - Through-tool compressed air (IK compressed air) - Partition wall for double-station system - 3D measuring probe with wireless connection - RTS table probe for measuring, verification - UT-Tec collision monitoring - Automatic safety doors

Kondisi: baru, Tahun pembuatan: 2024, A versatile saw for cutting wood into veneers, slats, and similar applications. Maximum workpiece height up to 400 mm. The powerful feed rate allows for very high throughput. The R800 is a robust saw. The R800 can accommodate bands of varying widths. It is equipped with mechanical feed for the workpiece. Designed to handle operations under high main motor load and at high processing speeds (up to 30 m/min) without issue. It is possible to use a band with a width of up to 80 mm. The sturdy frame of the machine is made of welded steel plate. Heavy-duty cast iron flywheels ensure maximum efficiency, and the wheels are mounted on dust-proof ball bearings. The lower section of the saw blade is specially reinforced, allowing for a higher degree of inertia without excessive loads during start-up and braking. To further enhance work consistency, the guides are precisely ground to maintain precise balance. Wheel diameter: 800 mm Max. cutting height: 400 mm Max. cutting width: 770 mm Table height from floor: 960 mm Table size: 1060 x 800 mm Blade length: 5530/5380 mm Bwodpfx Ahsgp I U Ne Uew Max. blade width: 80 x 0.8 mm Motor power: 11 kW (15 HP) Flywheel speed: 680 RPM Blade speed: 28.5 m/sec Dust extraction: 1x Ø 100 mm, 2x Ø 120 mm Required extraction airflow: 3840 m³/h Compressed air consumption: 60 l/min Operating pressure: 6 – 8 bar Net weight: 880 kg RVP210 Feed roller height: 50 mm Drive roller diameter: 200 mm Standard towing rollers: 2 pcs Standard roller cross-section height: 300 mm Roller cross-section length: 600 mm Roller cross-section tilt: 0–45° Max. roller-blade opening: 200 mm Max. square blade opening: 420 mm Motor power: 0.37 kW Variable feed speed: 0–30 m/min Compressed air consumption: 30 l/min Operating pressure: 3–6 bar Net weight: 180 kg

Kondisi: baru, Plate width 700 mm Plate depth 700 mm Plate height 1000 mm Machine weight approx. 750 kg Space requirement approx. 700 x 700 x 1000 mm The GERD WOLFF clamping tower, with overall dimensions of 700 x 700 x 1000 millimeters, is equipped with T-slot plates on all four sides. If you have not found your required size, you can also send us an email with the completed PDF form. With this, we can have a plate custom-manufactured for you. T-slot width: 22 and 38 millimeters Plate thickness: 65 millimeters T-slot spacing: Edge distance: 39 mm Number of slots: 9 Surface machined according to DIN 876/III Weight: 750 kg Material: EN-GJL-250 The cast iron grade EN-GJL-250, characterized by lamellar graphite, is notable for its high thermal conductivity, excellent damping properties, and good rigidity. This material also combines good machinability with high compressive strength and vibration damping characteristics. EN-GJL-250 is particularly suitable for mechanically stressed machine components as it is easily machinable while providing excellent surface finish. Bodpfx Aheudddqo Ueww Clamping cube – T-slot plates – plate field

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya,

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, lini pinggir otomatis bekas Möhringer Autojet pemilah S, konveyor rol masukan, pemotongan lintas jalur meja pengukur otomatis dengan masukan Bwsdpfx Ahsw Tkt Hj Uow mesin gergaji pinggir dengan pemisah serpihan dua lamella konveyor rol penggerak dengan penarik sistem kontrol dan lemari listrik

Tahun pembuatan: 2023, Kondisi: bekas, nomor mesin/kendaraan: 575.349, New demonstration machine! List price: €76,170 net Base machine complete in standard configuration for drilling and grooving: For detailed technical data, see the ProTec Type 0571 data sheet. Machining unit with: PowerBlock featuring 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y 4th drilling axis in Y Workpiece dimensions and weights: - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in throughfeed mode max. 5600 mm programmable workpiece length via software - Workpiece weight: max. 75 kg Profit HSK63F milling unit with 3-position tool magazine for automatic tool change, 5.5 kW (S1) motor, 1,000–20,000 rpm with frequency converter, clockwise and counterclockwise rotation, tool holder HSK63F with collet 462E/OZ25, cutter length up to 130 mm Additional information: MultiUnit machining unit with PowerBlock with 21/23 spindles, grooving saw, and optional Profit milling unit Connected load: 12 kVA Nominal current: 17.5 A Fuse protection: 32 A Voltage: 400 V, 50 Hz, 3 phase (without transformer) TN or TT network Pneumatic connection: 7 bar (102 psi) At the machine: coupling plug (quick coupling) ¼”, DN7.2, brass, factory-supplied To the machine: coupling socket (quick coupling) ¼”, DN7.2, brass, customer-supplied Supply line, hose inner diameter at least 12 mm Compressed air requirement: continuous air consumption approx. 230 L/min (approx. 3.8 L/sec) (compressed air) Extraction connection: 3x extraction nozzles, Ø 80 mm Extraction speed: 30 m/sec—measured at extraction nozzle Extraction requirement: min. approx. 2500 m³/h Machine weight approx. 1650 kg (including options!) Machine installation space: Generally, the ProTec fix must be bolted to the floor. Concrete flooring (or foundation) is required (at least at the 4 machine corners/machine feet). Equipment: ProTec 571 Profit HSK63F with 3-position magazine Roller table 765 mm (Y-axis), foldable, for front of machine, width 500 mm Roller table 765 mm (Y-axis), foldable, for rear of machine, width 500 mm Auxiliary stop 600 mm with integrated rollers for roller tables Additional safety device with lamella curtain Prerequisite for horizontal milling for Lamello P-System (without tools for Lamello P-System) Drill bit set for Protec, shank ø 10 mm with clamping surface (JSO) 1 HW roof tip drill bit 5x70 mm (NL 35 mm), LH # 30566-5-05035-L 3 HW dowel drill bits 5x70 mm (NL 35 mm), RH # 30540-5-05035-R 4 HW dowel drill bits 5x70 mm (NL 35 mm), LH # 30540-5-05035-L 3 HW dowel drill bits 8x70 mm (NL 35 mm), RH # 30540-5-08035-R 5 HW dowel drill bits 8x70 mm (NL 35 mm), LH # 30540-5-08035-L 2 HW dowel drill bits 10x70 mm (NL 35 mm), LH # 30540-5-10035-L 1 HW cup drill bit 15x70 mm (NL 35 mm), LH # 30300-5-15070-L 1 HW cup drill bit 20x70 mm (NL 35 mm), RH # 30300-5-20070-R 1 HW cup drill bit 35x70 mm (NL 35 mm), RH # 30300-5-35070-R HW grooving cutter ø 125/30 mm, groove width (SB) 4.0 mm, Z=12, LH, Leitz For chipboard and MDF only, solid wood upon request and arrangement Tool holder HSK63F 3 pcs. for collet 462E/OZ25 Collet 462E/OZ25 for shank 25 mm 3 pcs. Bwsdpfow Tfzfex Ah Uow Indexable insert shank cutter Z1+1 1 pc. HW with indexable insert

Kondisi: bekas, Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0728, en-23060701 Bedpexgnfxsfx Ah Usww

Kondisi: bekas, Tahun pembuatan: 2007, Bütfering SCO 313 QEH Bsdpfow Sh Apjx Ah Usww

Kondisi: bekas, Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: I05BN1159, kapasitas pendinginan: 55 kW (74,78 hp), Seri ENR adalah chiller berpendingin udara untuk penggunaan industri, dirancang untuk instalasi luar ruangan. ENR 055 dilengkapi dengan kipas aksial, kompresor gulir, kondensor dengan sirip aluminium bergelombang, dan evaporator koaksial yang dapat membersihkan sendiri untuk menjamin keandalan operasi maksimum. Dilengkapi pompa internal, tangki, dan refrigeran R410A. Kapasitas pendinginan 55 kW pada 7/12°C dan suhu lingkungan 35°C. Unit dijual dengan uji kebocoran terbaru. Bwsdpfx Ahew Sv Iyj Uow

Tahun pembuatan: 2009, Kondisi: siap digunakan (bekas), The system includes: (1) Vapour compressor Kühnle, Kopp & Kausch SFOG 5.6, volumetric flow: 16.30 m³/s, compressor/drive speed: 14,921/3,598 rpm, pressure increase: 140 mbar, temperature: 62°C, impeller material: steel, oil supply: air cooler, control: Loher frequency converter, rated power: 315 kW, weight: 2.95 t, with spare Loher motor and impeller with new shaft; (2) Gearbox Kühnle, Kopp & Kausch G2a, weight: 1.1 t; (3) Attachments: Siemens/Flender ARP-6 steel lamella coupling, base frame, electric motor, and operating manual. Bedopxnppspfx Ah Ueww

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, A semi-automatic finger jointing line for joining wooden elements up to 6 meters in length, immediately available after a complete overhaul. The tenoner is equipped with a transport belt table and an additional rotary table, which facilitates and accelerates operation, thereby increasing productivity. New glue nozzle for automatic glue application and new saw-chipper installed. Fixed-length finger jointing press for 6-meter workpieces. Technical data – Tenoner: - Spindle dimensions: Ø50 x 210 mm - Spindle speed: 5500 rpm Bwsdpstyy Exjfx Ah Ujw - Motor: 15 kW - Tool dimensions: Ø250 x 150 mm - Special chipper: Ø300 x 8 mm - Motor: 6 kW / 3000 rpm - Stepless feed table - Working width x height: 600 x 30 x 150 mm Press: - Working length: 6 m - Slat width up to 160 mm, thickness up to 80 mm, maximum gluing length: 6000 mm - Number of pneumatic cylinders: 4 (2 top, 2 bottom) - Supply pressure: 5–8 bar - Air consumption: 300 l/cycle - Saw blade diameter: 300 mm - Spindle diameter: 30 mm - Motor power: 1.5 kW - Saw feed: pneumatic - Dimensions (L/W/H): 7700 x 1160 x 1500 mm, weight: 1,500 kg Installation, commissioning, and operator training are available at extra cost.

Kondisi: sangat baik (bekas), jam operasional: 10 h, Fungsionalitas: berfungsi sepenuhnya, Automatic Grecon Dimter Ultra Finger Jointing Line The machine has undergone a complete overhaul. Specifications: Tenoner: Saw Spindle: - Spindle speed: 3,000 rpm - Saw motor power: 6 kW - Chip extraction: Ø100 mm Milling Spindle: - Spindle diameter: Ø50 mm - Usable spindle length: 210 mm - Max. tool diameter: Ø250 mm–Ø150 mm - Spindle speed: 6,000 rpm - Cutter motor: 15 kW / 3,000 rpm - Chip extraction: Ø150 mm Feeding Table: - Min. board length: 150 mm - Max. board length: 700 mm - Feed rate: Infinitely adjustable Dust Extraction: Chipper extraction nozzle diameter: Ø100 mm Cutter extraction nozzle diameter: Ø150 mm Extraction capacity (flow rate): approx. 2,400 m³/h Pneumatics: Operating pressure: 6 bar Air requirement: approx. 2.5 m³/h at 6 bar (15 Nm³/h) Longitudinal Finger Jointing Press CONTI M 6/6000: Press: - Lamella width: 25–160 mm - Finished lamella length: approx. 6,000+15-50 mm - Pressing force: 3–7.5 T (3,000–7,500 daN) Crosscut Saw: - Saw blade diameter: Ø400 mm - Spindle diameter: Ø30 mm - Motor: 4 kW / 3,000 rpm Dust Extraction: - Saw extraction nozzle diameter: Ø100 mm - Extraction capacity (flow rate): approx. 400 m³/h Pneumatics: - Operating pressure: 6 bar - Air requirement: approx. 2.5 m³/h at 6 bar (15 Nm³/h) Scope of Overhaul Work: 1. Cleaning of machine bodies and application of new paint 2. Replacement with new bearings on: main spindle of tenoner; saw spindle of the press; linear bearings on the tenoner table carriage guide; bearings on conveyor belts. 3. Installation of a new glue nozzle with 3.8 mm pitch on the tenoner body, assembly of a glue tank with safety valve; 4. New conveyor belts 5. Replacement of wiring on machine bodies 6. Replacement of pneumatic hoses for cylinders, solenoid valves, and other pneumatic components in the machines; 7. Replacement of gears and double roller chain on the press’s belt-chain feeder. 8. Refurbishment of electromagnetic brakes on the tenoner 9. Replacement of seals and O-rings (repair kits) in pneumatic cylinders; replacement of worn solenoid valves with new ones. Bsdpfxsuddvas Ah Ujww 10. Replacement with new operator panels with graphics on the tenoner control cabinet, press control cabinet, and auxiliary press control panel. 11. Replacement of buttons, indicator lights, and switches on control panels and control boxes. Replacement of terminal boxes with new ones. 12. Replacement of machine and press controlling PLCs, adaptation of the machine control program to user requirements 13. Installation of new frequency inverters on the press rollers and on the outfeed table pusher; 14. Overhaul of the electrical installation in the control cabinets, modernization, and drawing of the electrical diagram. 15. Installation of guards, mesh guards, necessary labels, safety stickers, manufacturer’s logo, and nameplates. 16. Replacement with new V-belts, inspection of pulleys, gear motors, and motors; 17. Replacement with new limit switches, inductive sensors, and photoelectric sensors (photo-cells) We specialize in finger jointing machines. Installation, commissioning, and operator training within Poland included in the price; in other countries, available at extra cost. We provide service and access to spare parts.