Beli Menggambar Tabung bekas (977)

Kondisi: baru, Tahun pembuatan: 2025, PROFIL BENDING ATTACHMENT PB20 The ideal supplement for pipe bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be mounted quickly and easily onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping device and pulled around the bending tool. With this system, the length of the legs to be bent can be precisely measured in conjunction with a length stop, ensuring repeatable accuracy during bending. TECHNICAL DATA: • Bending capacity (Steel 37): 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edge tools with bending radii R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: Dksdpenh R Ekjfx Aaqol • Welcome to test production in our in-house demo room • On-site consultation and informational meeting at your location • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance at your facility

Kondisi: baru, Tahun pembuatan: 2025, THE HIGH-PERFORMANCE MOBILE BENDING MACHINE: Dkedpfonfvx Njx Aaqel The compact, mobile design enables precise and repeatable bending both in the workshop and directly on-site, for tube diameters up to 35 mm, CU 42 mm. A powerful three-phase motor and precision gearbox ensure strong drive performance. The motor speed is automatically adjusted, allowing for faster reverse operation and reduced cycle times. Position detection directly on the bending axis delivers optimal bending accuracy and excellent repeatability. The bending angle can easily and quickly be set to 0.5° using push buttons. The large LCD display clearly shows the angles. Up to three bending angles can be saved, allowing efficient bending of tubes with varying requirements. For transport, the compact unit and accessories can be safely and neatly stored in sturdy transport cases. The “stationary tube, rotating tool” principle minimizes space requirements during bending. When working with thin-walled tubes, sliding shoes are used to ensure wrinkle-free bending and to create curves with minimal deformation in, for example, stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square, and round bars can also be bent with ease. POSSIBLE APPLICATIONS: • Hydraulic tubing • Prototype construction • Plumbing and heating installation • Technical data: • Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment 0.5° • Maximum 180° bending result; for special applications, continuous operation possible • 40 mm hexagonal shaft for rapid tool change • Safety foot switch with emergency stop function • 230 V AC connection • Weight 29 kg • Frequency converter and three-phase motor • 3 storable bending angles OPTIONAL ACCESSORIES: • Sliding shoe holder • Double roller mount • PB20 profile bender – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod base • Machine case • Tool case • Small bending device KBV • Special tools on request OUR SERVICE: • Welcome to test production on-site in our demonstration area • Consultation and information meetings at your premises • Leasing/financing options available via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance available

Kondisi: baru, Tahun pembuatan: 2025, nomor mesin/kendaraan: 1018, THE MANDREL BENDER WITH MANUAL CLAMPING This mandrel bending machine, featuring manual quick-release excenter clamping for tube fixation, enables efficient bending processes. The compact drive unit with a removable mandrel holder offers advantages for on-site assembly. Position detection directly on the bending axis ensures optimal bending accuracy. The bending angle is easily and quickly set via a user-friendly touchscreen control with menu-guided interface. The advanced control system allows for two speeds and a programmable overbend function to compensate for material springback. The bending cycle time is significantly reduced thanks to the automatic "retract" function at the end of the bend. For complex bending tasks, programs can be saved, supporting sequences of up to 50 bends per geometry. An almost unlimited number of programs, as well as up to 200 materials, can be stored on the controller or via USB stick. The plug-in bending tools enable rapid changeover to other tube sizes. For challenging geometries, the machine’s bending direction can easily be reconfigured for standard right or left bending. The open bending unit allows, for example, the bending of railing frames with only one weld seam. Optional PC-based calculation software provides cut length calculations for the entire geometry as well as feed, twist, and bending angles for each bend. The mandrel retraction is programmable and can be actuated automatically before reaching a preset bending angle. POSSIBLE APPLICATION AREAS: • Plant engineering, e.g. chemical industry • Hydraulic pipework • Prototype construction • Pipeline construction TECHNICAL DATA: • Bending capacity: Ø 6 to 50 mm • Min/max bending radius: 10 mm/140 mm • Bending radii: 2 x D • Multifunctional machine control, bend angle adjustment (0.1° increments) • Mandrel holder lengths: 1500/3000/4500/6000 mm (special versions available upon request for longer lengths) • Maximum bend angle: 180º • Weight: 300–500 kg (depending on configuration) Optional accessories: • Automatic mandrel lubrication (minimum quantity) • Digital measurement for length and rotation (resolution 0.1) • Remote operation of all functions via traversing unit (rotation and length stop) • Bending radius up to 250 mm • PC-based tube calculation software OUR SERVICES: • Welcome to testing and trial production in our in-house demo room • On-site consultation and information discussion Dksdpjnfvy Ujfx Aaqjl • Consulting and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Kondisi: baru, Tahun pembuatan: 2025, THE PRECISE 3-ROLL BENDING MACHINE The development of the compact and mobile horizontal bending machine focused specifically on producing dimensionally accurate spirals, such as handrails for spiral staircases. This represents the gold standard in bending, as two mutually dependent variables (radius and pitch) must combine in a single process to form a precise geometry. The interaction between pipe calculation on a PC, implementation on the bending machine, and control via measuring devices with subsequent correction of bending values ensures perfectly accurate results. With minimal and simple input into the PC pipe calculation program, the local printer provides a printout supporting the calculation of all necessary bending and correction data for operating the machine. A new powerful drive concept allows variable adjustment of the bending speed and requires only a standard 230 V (single-phase AC connection). Choose between hardened steel tools and surface-friendly hard plastic tools. For optimum feed even with tight bending radii, all three bending shafts are powered. This drive system also proves itself in everyday heavy-duty use for flat work and for bending pipes and profiles. Customers of the bending systems 4800, 5000, and 6000 can purchase the roll bending unit separately without the drive. The roll bending unit, designated RB43, can be adapted to the 4800, 5000, and 6000 bending systems via the bending shaft. Here, the machines serve as the drive unit. POSSIBLE APPLICATIONS: Djdpfsng A R Sjx Aaqokl • Handrails/lower rails for spiral staircases • Large-radius pipe and profile bends • General metal fabrication TECHNICAL DATA: • Bending capacity: Ø 10 to 60 mm • Minimum bending radius: 300 mm with Ø 42.4 mm • Right and left bending direction • Digital bending adjustment for radius and pitch • Safety foot switch with emergency stop function • Maintenance-free, robust three-phase motor • 230 V site-compatible connection • Weight: 280 kg OPTIONAL ACCESSORIES: • Support roller for stabilization • Lift roller for producing controlled pitch • MGR – Measuring device for determining the correct radius • MGV – Measuring device for determining the correct pitch via twist measurement • MPW – PC calculation program for determining accurate bending values • RB4303 – Universal bending tool for profiles up to 60 mm height • Tools for custom profiles OUR ON-SITE SERVICE FOR YOU: • Test production demo available in our in-house showroom • Consultation and information session at your location • Leasing/financing options, advice and processing • Service contracts, on-site maintenance

Kondisi: baru, Tahun pembuatan: 2025, THE COST-EFFECTIVE MANDREL BENDING MACHINE FOR TIGHT BENDING RADII This bending system provides solutions for complex geometries with standard radii of 2xD for tube dimensions ranging from 20 to 90 mm. Depending on the material quality and wall thickness ratio, radii of 1.5xD can also be reliably achieved in serial production. With a tool height of 120 mm, there is ample capacity for special profiles as well. The highly precise and powerful electric drive of the bending axis, along with the robust and rigid design of the mandrel support and bending arm, contribute to the desired bending results. The plug-in bending tools enable quick changeovers to other tube sizes. The clamping force for tube fixation is fully adjustable. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can store virtually unlimited programs for bend angle, length, and twisting angle for up to 50 bend sequences per tube length. A freely programmable database for up to 200 materials is available to monitor springback values. The control offers two operating modes: In "Simple Bending", the length and angle of the bends are automatically displayed relative to each other. In the "Controlled Bending" mode, the data is stored beforehand and a permanent target/actual comparison is conducted during the bending process. Also available with pneumatic rotation stop or with gear-assisted length and twist positioning. POSSIBLE APPLICATIONS: • Plant construction, e.g., chemical industry • Hydraulic piping • Metal fabrication • Prototype construction • Pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mm Dksdpfx Aenh R Susaqjl Bending capacity 9000: Ø 20 to 90 x 5 mm (depending on material) • Bending radius min/max: 40 mm / 250 mm • Minimum bending radius: 1.5 x Ø (standard 2 x Ø) • Multi-function machine control; bend angle adjustment (0.1°) • Mandrel support lengths: 3000/4500/6000 mm • Maximum 180º bend result • Weight: 1600–3200 kg (depending on version) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Larger bending radius up to 300 mm • Length and twist positioning via automatic braking function or manual stops using foot switch • Semi-automatic length and twist positioning via servo motors • Automatic tool retraction • Tube calculation software • 10-inch touchscreen with integrated tube calculation • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICE: • Welcome to test production at our in-house demo room • Consultation and information session at your location • Advice and acquisition via leasing/financing purchase through JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Kondisi: baru, Tahun pembuatan: 2025, THE PRACTICAL HAND BENDING DEVICE: The compact, mobile design enables precise and repeatable bending in a bench vise. Operation is carried out via a screw-in handle. A lockable setting ring ensures repeatable bending accuracy. Tool exchange is exceptionally simple due to the plug-in system. The principle of “stationary pipe and rotating tool” allows bending in the smallest possible space. For thin-walled pipes, sliding shoes are used for crease-free bending, enabling the production of bends with minimal deformation, e.g. for stainless steel and copper pipes. The optional model with hexagonal drive facilitates not only use in a vise, but also allows the bending device to be powered by the 3000 and 6000 systems. For this, the KBV is simply mounted onto the machine’s bending shaft. POSSIBLE APPLICATION AREAS: • Hydraulic pipework • Prototype construction • Plumbing and heating installation TECHNICAL DATA: • Bending capacity Ø 6 to 18 mm • Manual bending angle limitation • Maximum bending angle of 180º Dkodong Amkopfx Aaqol OPTIONAL ACCESSORIES: • KBV with hex drive for bending on model 3000 or 6000 • Machine case • Length stop OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our demo room • Consultation and information meeting at your premises • Consulting and processing of leasing/financing purchases via JUTEC • Trade-in of your current machine • Service contracts, maintenance on-site at your location

Tahun pembuatan: 1998, Kondisi: siap digunakan (bekas), machinery-press-001 Dsdpfoy Hk S Rjx Aaqokl

Tahun pembuatan: 2014, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 591144, 2* tangki udara bertekanan galvanis Termasuk sertifikat Per tangki udara bertekanan: Tipe konstruksi: berdiri Volume tangki: 5.000 l Tekanan maksimum: 11 bar Djdpfxjy Hx Dzs Aaqjkl Diameter: 1.400 mm Tinggi tangki: 3.570 mm Berat: 1.050 kg Koneksi saluran masuk udara: 2x DN 100 Koneksi saluran keluar udara: 2x DN 100 Koneksi katup pengaman: G 2 Koneksi set manometer: G ½ Koneksi saluran pembuangan kondensat: G 2½ Pemeriksaan tangki: RL 2014/68/EU Lubang inspeksi sesuai AD2000: 1x manhole Suhu operasi minimum: -10 °C Suhu operasi maksimum: +50 °C Pelapisan permukaan: galvanis

Tahun pembuatan: 2012, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, 2 * tangki udara bertekanan galvanis 2000L Termasuk sertifikat Per tangki: Bentuk konstruksi: berdiri Volume tangki udara: 2.000 l Tekanan maksimum: 11 bar Diameter: 1.150 mm Dedpjy Hx A Rjfx Aaqjkl Tinggi tangki: 2.375 mm Berat: 471 kg Koneksi udara masuk: 2x G 2½ Koneksi udara keluar: 2x G 2½ Koneksi katup pengaman: G 1 Koneksi set manometer: G ½ Koneksi pembuangan kondensat: G 2½ Inspeksi tangki: RL 2014/68/EU Bukaan servis AD2000: 2x lubang tangan Suhu operasi minimum: -10 °C Suhu operasi maksimum: +50 °C Pelapis permukaan: Galvanis

Kondisi: baru, Tahun pembuatan: 2026, Complete set including LUFT 1500 screw compressor with inverter, vertical 1000 L air receiver with accessories, and IZBERG N20S dryer. The CORMAK LUFT series screw compressor from the Polish brand CORMAK incorporates state-of-the-art solutions in pneumatics, paired with the use of high-quality materials and components. Low operating costs, user-friendly operation, ergonomic and robust construction, and high performance ensure efficient and trouble-free operation. Dodpfx Aexnyhujaqokl Technical specifications LUFT 1500 INVERTER: - Motor power: 11 kW - Voltage: 400V/50Hz - Output at 0-6 bar: 1620 L/min - Output at 6 bar: 1580 L/min - Output at 8 bar: 1350 L/min - Output at 10 bar: 1230 L/min - Outlet connection diameter (G): 1" - Dimensions: 1170 x 730 x 1020 mm - Weight: 243 kg Technical specifications IZBERG N20S: - Inlet/outlet pipe diameter (BSP): 1" - Maximum working pressure: 10 bar - Maximum inlet air temperature: ≤ 38°C - Dew point temperature: 3°C - Flow rate: 2800 l/min - Power: 0.58 kW - Supply voltage: 230 V - Dimensions (L x W x H): 420 x 700 x 690 mm - Weight: 37 kg - Type and quantity of refrigerant: R134a, 550 g Technical specifications 1000L VERTICAL AIR RECEIVER: - Weight (kg): 230 - Connections: 6 - Connection size: 2", 1/2" - Size: 230 x 80.8 cm - Tank capacity (l): 1000 - Working pressure (bar): 11 - Wall thickness (mm): 4 - Diameter (mm): Ø 808 - Height (mm): 2300

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Listing ini menawarkan Hydraulic Rubber Vulcanization Press yang diproduksi oleh TERENZIO, model 'G' MATRICOLA - N, diproduksi tahun 1967. Mesin ini memiliki berat sekitar 35.000 kg, mencerminkan desain industri yang kokoh untuk aplikasi pemrosesan karet berat. Hydraulic press ini cocok untuk pembeli yang mencari mesin vulkanisasi tugas berat dari produsen Italia terkemuka dengan sejarah yang panjang. Djdpfx Asyqxm Neaqekl

Kondisi: siap digunakan (bekas), Tabung Detektor GASTEC menunjukkan konsentrasi secara langsung melalui skala terkalibrasi yang tercetak pada tabung. Di GASTEC, kami berupaya untuk menghasilkan tabung detektor berkualitas tertinggi untuk menganalisis gas/uap di udara, serta polutan di tanah dan air melalui penelitian dan pengembangan mutakhir kami. Melalui upaya tersebut, kami telah memperoleh reputasi yang solid di antara pelanggan kami di hampir semua sektor industri, perdagangan, dan masyarakat. Tabung kini tersedia untuk lebih dari 500 aplikasi berbeda. Dkjdpfxsy D D Tco Aaqol

Kondisi: bekas, Tahun pembuatan: 2019, jam operasional: 40.000 h, Fungsionalitas: berfungsi sepenuhnya, CTP SCREEN PTR 8900N _ GLV 512 WORKFLOW XMF 6.11 Lengkap Dkjdpey Enwnsfx Aaqsl

Kondisi: diremajakan ulang (bekas), Fungsionalitas: fungsi terbatas, Tahun pembuatan: 2003, jam operasional: 24.000 h, Diameter pipa (maks.): 100 mm, Panjang pipa (maks.): 4.100 mm, Sudut pembengkokan (maks.): 183 °, radius pembengkokan (maks.): 300 mm, ketebalan dinding: 8 mm, de-Transfluid DB 2090 DB CNC Dornbiegemaschine für Rohre. Hochwertige deutsche Maschine in exzellentem Zustand, die Haupt-Hydraulikpumpen wurden komplett generalüberholt und der Hauptkopf vollständig instand gesetzt. Es muss lediglich ein neuer Encoder installiert werden, dann ist die Maschine betriebsbereit. Ausstattung: - Maximale Rohrkapazität: 100 mm x 1,6 mm bei 1,5D - Vorzeitiger Dornrückzug - Vollautomatische Einstellung der Spannbacken und Mitnehmer - Verstärkter Mitnehmer für enge Radien bei dünnwandigen Rohren - Lange Aufspannlänge mit 4000 mm Überdorn Im Lieferumfang ist umfangreiches Werkzeug im Wert von über 150.000 AUD enthalten: - 101,6 mm - 152 mm CLR - 101,6 mm - 200 mm CLR - 76,2 mm - 114 mm CLR - 76,2 mm - 200 mm CLR - 76,2 mm - 238 mm CLR - 63,5 mm - 96 mm CLR - 57,2 mm - 86 mm CLR - 50,8 mm - 76 mm CLR - 44,5 mm - 67 mm CLR Dedpfetrd T Tox Aaqekl - 40 x 40 mm - 120 mm CLR - 50 x 50 mm - 150 mm CLR - 60,3 mm - 150 mm CLR - 48,3 mm - 120 mm CLR

Kondisi: bekas, Tahun pembuatan: 1973, Pressing force 1000 t Column gap 4150 mm Stroke 1200 mm Distance table/blank holder, max. stroke up, adj. up 2100 mm Table area 4000 x 2200 mm Drawing cushion force in table 360 t Drawing cushion stroke in table 300 mm Drawing cushion force in slide 100 t Drawing cushion stroke in slide 150 mm Slide area 4000 x 2200 mm Side column opening 1300 mm Dkjdpfeyn R Elox Aaqel Drawing cushion in table hydraulic, controlled Drawing cushion in slide hydraulic, controlled Shock damping hydraulic Machine weight approx. 280 t The machine was overhauled in 1999. Progressive press from a press line

Kondisi: bekas, Tahun pembuatan: 1972, Pressure: 800 t Column clearance: 3160 mm Stroke: 1100 mm Distance table/sheet holder, max. stroke up, upper crossbeam adjustable: 1900 mm Table area: 3100 x 1900 mm Cushion pressure in table: 300 t Cushion stroke in table: 400 mm Cushion pressure in ram: 80 t Cushion stroke in table: 150 mm Ram area: 3100 x 1900 mm Cushion in ram: hydraulic, controlled Dkjdsyn R Efepfx Aaqel Cushion in table: hydraulic, controlled Follow-on press of a press line

Kondisi: bekas, Tahun pembuatan: 1973, Pressing force 1000 t Column gap 4150 mm Stroke 1200 mm Distance table/blank holder, max. stroke up, adj. up 2100 mm Table area 4000 x 2200 mm Drawing cushion force in table 360 t Drawing cushion stroke in table 300 mm Drawing cushion force in slide 100 t Drawing cushion stroke in slide 150 mm Slide area 4000 x 2200 mm Side column opening 1300 mm Drawing cushion in table hydraulic, controlled Drawing cushion in slide hydraulic, controlled Dkjdpfx Aaoyn R D Ueqsl Shock damping hydraulic Machine weight approx. 280 t The machine was overhauled in 1999. Progressive press from a press line

Kondisi: bekas, Tahun pembuatan: 1974, Pressing force 600 t Clearance between uprights 2,600 mm Stroke 900 mm Distance table/blank holder, max. stroke up, upper adjustable 1,600 mm Table size 2,500 x 1,730 mm Cushion force in table 250 t Cushion stroke in table 400 mm Cushion force in ram 63 t Cushion stroke in ram 150 mm Ram area 2,500 x 1,730 mm Lateral frame opening 1,100 mm Die cushion in table: hydraulic, controlled Die cushion in ram: hydraulic, controlled The machine was overhauled in 2005 Follow-on press in a press line Dksdpfxsyn R D Ij Aaqol

Kondisi: bekas, Tahun pembuatan: 1974, Pressing force 600 t Clearance between uprights 2,600 mm Stroke 900 mm Distance table/blank holder, max. stroke up, upper adjustable 1,600 mm Table size 2,500 x 1,730 mm Cushion force in table 250 t Cushion stroke in table 400 mm Cushion force in ram 63 t Cushion stroke in ram 150 mm Dodpfxoyn R Dzo Aaqjkl Ram area 2,500 x 1,730 mm Lateral frame opening 1,100 mm Die cushion in table: hydraulic, controlled Die cushion in ram: hydraulic, controlled The machine was overhauled in 2005 Follow-on press in a press line

Kondisi: bekas, Tahun pembuatan: 1974, Pressing force 600 t Clearance between uprights 2,600 mm Stroke 900 mm Distance table/blank holder, max. stroke up, upper adjustable 1,600 mm Table size 2,500 x 1,730 mm Cushion force in table 250 t Cushion stroke in table 400 mm Cushion force in ram 63 t Cushion stroke in ram 150 mm Ram area 2,500 x 1,730 mm Lateral frame opening 1,100 mm Die cushion in table: hydraulic, controlled Die cushion in ram: hydraulic, controlled Dsdpjyn R Duefx Aaqskl The machine was overhauled in 2005 Follow-on press in a press line

Kondisi: bekas, Tahun pembuatan: 1973, Pressure: 1000 t Gap between uprights: 4150 mm Stroke: 1200 mm Distance table/ram, max. stroke up, adj. up: 2100 mm Table size: 4000 x 2200 mm Cushion pressure in table: 360 t Cushion stroke in table: 300 mm Cushion pressure in ram: 100 t Cushion stroke in ram: 150 mm Ram surface: 4000 x 2200 mm Side frame opening: 1300 mm Cushion in table: hydraulic, controlled Cushion in ram: hydraulic, controlled Cutting shock absorber: hydraulic Control: Siemens S7 Height above floor: 7.7 m Total power requirement: 300 kW Dkedpfeynmm Ssx Aaqol Machine weight approx. 280 t Space requirement approx. 5.75 x 4.3 x 9.55 m Year of manufacture: 1973 Modernised: 2005 With oil-hydraulic drive, hydraulically controlled drawing cushion in table and ram, hydraulic cutting shock absorber Dismantled and stored – Video prior to dismantling available from seller

Kondisi: bekas, Tahun pembuatan: 1972, Press force 800 t Upright distance 3160 mm Stroke 1100 mm Control Siemens S5 Distance table/sheet holder, max. stroke up, upper adjustable 1900 mm Table surface 3100 x 1900 mm Cushion force in table 300 t Cushion stroke in table 400 mm Cushion force in slide 80 t Cushion stroke in slide 150 mm Slide area 3100 x 1900 mm Cushion in slide hydraulic, controlled Cushion in table hydraulic, controlled Dkjdpfjynmmxjx Aaqol Total power requirement 200 kW Machine weight approx. 150 t Space required approx. 4.95 x 3.3 x 10.2 m Follow-on press of a press line

Kondisi: bekas, Tahun pembuatan: 1972, Press force 800 t Upright distance 3160 mm Stroke 1100 mm Control Siemens S5 Distance table/sheet holder, max. stroke up, upper adjustable 1900 mm Table surface 3100 x 1900 mm Cushion force in table 300 t Cushion stroke in table 400 mm Cushion force in slide 80 t Cushion stroke in slide 150 mm Slide area 3100 x 1900 mm Dkjdpfx Ajynmmroaqsl Cushion in slide hydraulic, controlled Cushion in table hydraulic, controlled Total power requirement 200 kW Machine weight approx. 150 t Space required approx. 4.95 x 3.3 x 10.2 m Follow-on press of a press line

Kondisi: bekas, Tahun pembuatan: 1972, Press force 800 t Upright distance 3160 mm Stroke 1100 mm Control Siemens S5 Distance table/sheet holder, max. stroke up, upper adjustable 1900 mm Table surface 3100 x 1900 mm Cushion force in table 300 t Cushion stroke in table 400 mm Cushion force in slide 80 t Dsdpfx Aoynbdfoaqokl Cushion stroke in slide 150 mm Slide area 3100 x 1900 mm Cushion in slide hydraulic, controlled Cushion in table hydraulic, controlled Total power requirement 200 kW Machine weight approx. 150 t Space required approx. 4.95 x 3.3 x 10.2 m Follow-on press of a press line

Kondisi: bekas, Tahun pembuatan: 1972, Press force 800 t Upright distance 3160 mm Stroke 1100 mm Control Siemens S5 Distance table/sheet holder, max. stroke up, upper adjustable 1900 mm Table surface 3100 x 1900 mm Cushion force in table 300 t Cushion stroke in table 400 mm Cushion force in slide 80 t Cushion stroke in slide 150 mm Dedpfx Aaoynbc Ioqokl Slide area 3100 x 1900 mm Cushion in slide hydraulic, controlled Cushion in table hydraulic, controlled Total power requirement 200 kW Machine weight approx. 150 t Space required approx. 4.95 x 3.3 x 10.2 m Follow-on press of a press line