Beli Menjepit Poros Layar bekas (5.131)

Tahun pembuatan: 2014, Kondisi: bekas, 10018 Mobile 2-Fraction Spiral Shaft Screen GÜNTHER / Doppstadt SPLITTER F2 Used, year of manufacture 2014 Gisdpjwhza Ujfx Adtol Approx. 3,000 operating hours Including mobile screen deck 0/120 and stationary deck 0/60 Screening of difficult-to-sieve materials such as commercial waste, bulky waste, construction and demolition waste, metal scrap, slag, waste wood, organic waste, landfill reclamation into 2 fractions - Drive: Generator type 50 kVA / Voltage 400/230 V / Frequency 50 Hz / Speed 1500 rpm / Fuel tank capacity 250 litres / Fuel: diesel - Feed hopper: Length 2700 mm / Width 2100 mm / Loading volume 3 m³ - SPLITTER screen deck / spiral shaft deck AA 254: Length 6000 mm / Width 2500 mm / Drive 3 x 4.0 kW, controlled via frequency converter / 180 mm pitch / Separation cut 0-80/120 mm - Feed conveyor FH: Length 3000 mm / Width 1200 mm / Drive 1 x 4.0 kW via frequency converter / Angled design, incl. hopper for receiving discharge belt from shredder / Belt quality: Chevron - Undersize collection conveyor, longitudinal FC: Length 5600 mm / Width 1200 mm / Drive 1 x 3.0 kW / Permanent magnet separation / Belt quality: Chevron 16 mm - Undersize collection conveyor, cross FC: Length 1600 mm / Width 1000 mm / Drive 1 x 3.0 kW / Belt quality: Chevron 16 mm - Mobile undersize discharge conveyor: Length 4460 mm / Width 1000 mm / Drive 1 x 4.0 kW / Upgradable for FE-fraction / Belt quality: Chevron 16 mm - Oversize collection conveyor FC: Length 5300 mm / Width 1200 mm / Drive 1 x 3.0 kW / Belt quality: Chevron 16 mm - Mobile oversize discharge conveyor: Length 7350 mm / Width 1700 mm / Drive 1 x 5.5 kW / Upgradable for FE-fraction / Discharge height 5000 mm - Control panel: Complete electrical control via PLC in a central control cabinet (protection class IP55) / Control and visualisation via Siemens S7 colour touch panel / Radio remote control with colour display for all travel and working functions - Mobility: Electric crawler chassis with rubber pads / Electrohydraulic control of moving parts - Power generator: 50 kVA, water-cooled 4-cylinder diesel engine - Throughput: up to 60 t/h (depending on material) - Blue conveyor belt approx. 3000 x 1300 mm (L x W) Transport dimensions approx. 13600 x 3000 x 3100 mm (L x W x H) Weight approx. 21,000 kg Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, transport, or assembly Description and price subject to change Dismantling, transport, and loading can be optionally provided by us To avoid misunderstandings, an on-site inspection is possible and recommended by appointment Sale as-is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, all warranties are excluded; the following applies: “sold as seen” Images and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT. Payment required prior to collection or shipment Delivery terms: ex location

Kondisi: sangat baik (bekas), 7847 Gedpfox Hhxhex Adtjil

Kondisi: baru, Tahun pembuatan: 2025, The shredders of the SSH series are designed for the efficient reduction of various waste materials such as cables, radiators, electronic circuit boards, wood, plastics, and tires, using tailor-made blades mounted on a single rotating shaft. A programmable hydraulic pusher ensures continuous feeding of the rotor. In the event of a blockage, the rotor reverses its rotation direction, allowing the cutting process to continue without interruption. The size of the shredded material is determined by a screen located beneath the rotor. The material remains within the shredder until it reaches the desired size and is then discharged through the screen. Gsdpfsg Dcq Tjx Adtsil The SSH series shredders utilize components from world-class manufacturers, complying with our quality standards. Depending on the required production capacity, the SSH S1, SSH M1, and SSH L1 models are CE-certified.

Kondisi: bekas, Tahun pembuatan: 2018, diameter rotor: 368 mm, lebar rotor: 1.500 mm, 10027 Gedpfx Adsxwdiujtjil

Tahun pembuatan: 1997, Kondisi: baik (bekas), Type: DDA:VP-370:A27097 Giodpot S Sxgsfx Adtel Trough: approx. 3,000 x 660 mm Screw diameter approx. 370 mm Drive via gear motor

Kondisi: bekas, Tahun pembuatan: 2025, Sistem penghancur terdiri dari 3 mesin utama beserta perlengkapannya. Seluruh mesin dan perlengkapan ditempatkan pada satu sasis, memudahkan penggunaan dan pengendalian fasilitas. Kotak pelindung di sekitar sasis menghilangkan semua potensi bahaya. Penggerak rotor dilakukan dengan sabuk V, pemberian material secara manual melalui sabuk konveyor, dan proses pendinginan ruang penghancur dilakukan secara otomatis oleh mesin melalui sistem kipas pneumatik. Gsdpstuv R Usfx Adtoil

Kondisi: bekas, Ayakan dua dek stainless steel bekas Kason model K40-2-SS. Ukuran saringan sekitar 900 mm diameter. Unit memiliki tiga saluran keluar produk. Giodpfex Tidfjx Adtol

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, FOD BYDGOSZCZ Shaft Multi-Blade Saw* DPPD III 50E 530/150 Catalogue No. 7405 TECHNICAL DATA - max cutting height: 150 mm - max workpiece width: 700 mm - shaft working width with blades: 530 mm - max saw blade diameter: 450 mm (currently installed 350 mm) - blade arbor diameter: 90 mm From above: - anti-kickback fingers - 2 toothed feed rollers From below: Gjdpfx Aex Tgvrodtjil - 2 smooth feed rollers - blade shaft - smooth feed shaft - 4 feed speed settings - feed motor approx. 2 kW - main motor: 30 kW - machine dimensions (L/W/H): 2400 x 1700 x 1900 mm - weight: approx. 3000 kg – Made in Poland – Used, in very good condition Net price: 38,900 PLN Net price: 9,260 EUR depending on EUR 4.2 exchange rate (Prices may vary with major rate fluctuations) * MAR-MASZ guarantees the quality of your purchase but is not an authorized representative of the manufacturer. All trademarks and names are used for informational purposes only to identify the product. We only resell goods that have previously been placed on the market by the manufacturer. We have no business relationships with the manufacturer.

Kondisi: baru, Tahun pembuatan: 2025, daya: 17 kW (23,11 hp), Shredders of the SSH series are designed for the efficient size reduction of various waste materials such as cables, radiators, electronic circuit boards, wood, plastics, and tires, using tailored blades mounted on a single rotating shaft. A programmable hydraulic pusher ensures continuous feed to the rotor. In the event of a blockage, the rotor automatically reverses direction, allowing the shredding process to continue without interruption. The size of the shredded material is determined by a screen installed beneath the rotor. Material remains within the shredder until it reaches the desired size and then exits through the screen. Gijdpowm Iw Refx Adtsl The shredding machines of the SSH series are equipped with complementary components from world-class brands, meeting our quality standards. Depending on the required production capacity, the models SSH S1, SSH M1, and SSH L1 are CE certified.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 10108, diameter roda gerinda: 100 mm, panjang penggilingan: 100 mm, lebar di tengah: 100 mm, kecepatan spindle penggilingan: 18.000 rpm, kecepatan spindel (maks.): 250 rpm, TECHNICAL DETAILS Grinding Spindle Headstock Infeed: X1 axis (CNC-controlled) Feed: Z1 axis (CNC-controlled) Grinding Spindle (I) Infeed: X2 axis (CNC-controlled) Feed: Z2 axis (CNC-controlled) Grinding Spindle (II) Infeed: X3 axis (CNC-controlled) Grinding Spindle (I + II) Flange: Ø 52 mm Standard hub: Ø 32 mm Lubrication: permanent grease lubrication Bearing seal: with purge air Set air pressure: see Section 5.3.1 Drive: 12 kW Speed control: via frequency converter Max. speed: 18,000 rpm Balancing: electronic Grinding Wheel (Spindle I + II) Type: Borazon (CBN), vitrified bonded Diameter: Ø 100 mm Bore: Ø 32 mm Abrasive width: max. 20 mm Peripheral speed: max. 125 m/s Cam Piece Workpiece rotary diameter: max. 80 mm Clamping length: max. 100 mm Grinding length: max. 100 mm Workpiece weight: max. 0.5 kg Workpiece Spindle Headstock Design: stationary with integrated infeed/eject movement Stroke: 50 mm Workpiece Spindle Dimensions: Ø 210 x 700 mm Flange: Ø 180 mm Standard hub: Ø 127 mm Lubrication: oil lubrication Set air pressure: see Section 5.3.1 Drive: servo motor, C1 axis (CNC-controlled) Max. speed: 250 rpm Tailstock Longitudinal adjustment: manual via gearwheel Tailstock Quill Live center: mounting bore Ø 20 mm Clamping force: adjustable via pneumatics Dimensions: 50 x 80 x 178 mm Lubrication: permanent grease lubrication Bearing seal: with purge air Set air pressure: see Section 5.3.1 Grinding Stock Design: stationary Steady Rest Type: GR - 115 Diameter range: Ø 45 - Ø 60 mm Set air pressure: see Section 5.3.1 Grinding Wheel Profiling Fine dressing: circumference and face with diamond roll, mounted on the dressing spindle Circumferential dressing: Ø 110 mm Dressing Spindle Dimensions: Ø 80 x 250 mm Flange: Ø 100 mm Standard hub: Ø 75 mm Lubrication: permanent grease lubrication Gjdewynhvspfx Adtjil Bearing seal: with purge air Set air pressure: see Section 5.3.1 Drive: 5.3 kW Speed control: via frequency converter Max. speed: 30,000 rpm MACHINE DETAILS Setup dimensions: 8,935 x 5,956 x 3,437 mm Weight: 24 t Connected load: 87 kVA

Tahun pembuatan: 2002, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Doppeldeck-Siebkasten: 1.000 x 5.000 mm Gjdpfx Adjlxzkkstjil Quadratmaschenbeläge auf beiden Siebdecks E-Motor 4 kW Stahlbau und Auslaufrutschen

Kondisi: diremajakan ulang (bekas), jam operasional: 8.000 h, DIRENOVASI SECARA TOTAL-----SIAP DIGUNAKAN LANGSUNG HAMMEL 750 E - Penggerak 2 x 110 kW listrik - dengan ban konveyor pembuangan panjang Pekerjaan yang telah dilakukan: - 2 unit motor hidrolik direkondisi - 2 unit pompa hidrolik direkondisi - kipas baru Gsdpfex Szhyjx Adtjil - sabuk baru pada konveyor - rol penggerak baru untuk konveyor - servis lengkap termasuk penggantian oli Mesin dapat didemonstrasikan di gudang kami di D-59329 Wadersloh.

Kondisi: baru, For sale: pipe straightening machine from the German manufacturer SMS MEER. The machine is brand new and was dismantled from a facility that went bankrupt during the delivery and installation process. The machine is equipped with two Siemens drive motors, each with 200 kW power. The straightening rollers have the following dimensions: length 460 mm, diameter at the ends 400 mm, diameter at the center 300 mm. The weight of the machine alone is 44 tons, total weight 55 tons. For interested parties, I can provide many photos taken before disassembly. Gedpfx Adjm H Unhstoil

Kondisi: sangat baik (bekas), catalog no. 7318 TECHNICAL DATA - Maximum cutting height: 140 mm - Maximum element width: 700 mm - Working width of the saw shaft: 650 mm - Maximum saw blade diameter: 400 mm - Blade bore diameter: 70 mm From above: - Anti-kickback fingers - 2 driven, toothed feed rollers From below: - Anti-kickback fingers - 2 driven, smooth feed rollers - Saw shaft - Ribbed feed roller - Continuously variable feed speed control via inverter - Feed motor: 4.4 kW - Main motor: 30 kW - Machine dimensions (LxWxH): 2500 x 1400 x 1900 mm - Weight: approx. 2500 kg Giedex Tgtkopfx Adtel – Manufactured in Poland – Used machine, condition: very good Net price: 36,900 PLN Net price: 8,790 EUR (based on 4.2 PLN/EUR; price may fluctuate) * The company MAR-MASZ guarantees the quality of your purchase but is not an authorized representative of the manufacturer. All trademarks and names are used solely for informational purposes to allow product identification. We only resell goods previously released on the market by the manufacturer. We have no business relationship with the manufacturer.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, panjang total: 3.860 mm, lebar total: 1.200 mm, tinggi total: 3.000 mm, berat keseluruhan: 5.500 kg, masa garansi: 12 bulan, lebar bilah: 75 mm, daya: 30 kW (40,79 hp), panjang rotor: 770 mm, Die shredders der DSH series are designed for processing large quantities of durable materials and feature custom-made blades mounted on two parallel shafts. The rotors operate independently, each powered by a planetary gearbox driven by an electric motor. The twin-shaft rotor provides an effective solution for recycling metal scrap, plastics, wood, and other tough materials. Its robust construction and synchronized double-shaft blades ensure long-lasting, reliable performance for even the most demanding applications. Godpjgwhb Iefx Adtsil As with the SSH series, the DSH series shredders use top-brand auxiliary components, ensuring consistent high quality throughout. Models are available in DSH S1, DSH M1, and DSH L1 versions, all CE-certified.

Kondisi: bekas, Tahun pembuatan: 1991, panjang total: 1.520 mm, lebar total: 720 mm, daya: 30 kW (40,79 hp), Telah sepenuhnya direkondisi, dilumasi, dan siap beroperasi. Shredder hidrolik otomatis dengan dua poros ini dirancang untuk menghancurkan dan memisahkan serpihan logam, plastik, kayu, kabel listrik, dan berbagai material lainnya. Dikendalikan oleh PLC yang memantau sensor-sensor, mengelola rotasi poros, serta secara otomatis mengaktifkan fungsi mundur; jika terjadi beberapa penyumbatan dalam waktu singkat, mesin akan mati otomatis. Selain itu, unit akan otomatis mati setelah periode tertentu saat beroperasi tanpa beban. Sorotan Teknis: Daya: 30 kW Tekanan hidrolik maksimum: 250 bar Torsi: 11.780 Nm 2 poros penghancur dengan pisau Gjdpfewk Egwsx Adtoil Penggerak hidrolik dengan transmisi roda gigi (Valmet BB 3150CC) Penyesuaian tekanan pisau otomatis (sistem pegas cakram)

Kondisi: sangat baik (bekas), Guide rail - Support rail for shafts, rails -Type: 1050-620-00 -Holes: 6.5 mm -Hole spacing: 100 mm Gisdpfx Adjb A N Rxjtjl -Price: per piece -Quantity: 6 pieces available -Dimensions: 600x50xH23 mm -Weight: 1 kg/piece

Kondisi: baru, Suku cadang untuk Doppstadt Rotaro dijual: - berbagai keranjang ayakan - 2 unit penekan lanjutan Giedpfx Adox Szgiotol - roda gila - panel kontrol dengan kontrol tipe Schneider - panel kontrol dengan inverter frekuensi

Kondisi: sangat baik (bekas), FOD BYDGOSZCZ* DPPA II 50 510/120 Shaft Multi-Blade Saw Catalog number: 7307 TECHNICAL DATA - Maximum cutting height: 120 mm - Maximum workpiece width: 700 mm - Working width of shaft with saw blades: 510 mm - Maximum saw blade diameter: 400 mm - Saw blade bore diameter: 70 mm From above: - Anti-kickback fingers - 2 toothed feed rollers From below: - 2 smooth feed rollers - Saw blade shaft - Smooth feed roller - 2 feed speed options - Feed motor approx. 2 kW - Main motor: 30 kW - Infeed roller table - Roller width: 700 mm - Overall dimensions (L x W x H): 3000 x 750 x 800 mm - Outfeed roller table - Width: 760 mm - Overall dimensions (L x W x H): 3100 x 900 x 800 mm - Machine dimensions (L x W x H): 1800 x 1500 x 1840 mm + electrical box - Weight: approx. 3000 kg ADVANTAGES - Polish-made - Equipped with roller tables - Used machine, in very good condition Net price: 35,900 PLN Gijdpfex S Ip Rox Adtol Net price: 8,540 EUR (based on 4.2 EUR exchange rate) (Prices may vary with significant currency fluctuations) * MAR-MASZ guarantees the quality of your purchase but is not an authorized representative of the manufacturer. All trademarks and names are used solely for informational purposes to identify the goods. We only resell products previously marketed by the manufacturer. We have no business affiliation with the manufacturer.

Tahun pembuatan: 2013, Kondisi: baik (bekas), Computer monitor, display, TFT industrial monitor, flat screen, industrial touchscreen monitor -Manufacturer: Pro-face, industrial flat screen monitor with touchscreen Godpfouh H Efsx Adtoil -Type: FP3710-T42-U .: PFXFP3710T2AU -Model: 3580406-01 -Dimensions: 475/120/390 mm -Weight: 10.4 kg

Kondisi: bekas, Tahun pembuatan: 2006, 1 Gjdex Szgcopfx Adteil

Kondisi: sangat baik (bekas), CATALOG NO. 7213 TECHNICAL DATA - Maximum cutting height: 180 mm - Track width: 400 mm - Shaft width: 370 mm - Shaft diameter: 60 mm - Maximum saw blade diameter: 300 mm - Saw blade bore diameter: 80 mm - Minimum element length: 630 mm - Maximum element width: 600 mm From above: - Pneumatic pressure system - Pawls - Metal pressure roller, 2 pcs - Pawls - Roller with saw blades - Smooth pressure roller - Pawls - Smooth pressure roller From below: - Metal feed roller with teeth, 2 pcs - Pawls - Track - Roller with saw blades - Track - Stepless feed speed adjustment via inverter - Main motors: 2 x 55 kW - Feed motor: 4 kW - Hydraulic body lift (up/down) - Hydraulic adjustment of rollers with saw blades - Pump motor: 0.37 kW - Central lubrication - Extraction port diameter: 1 x 300 mm, 1 x 380 mm - Overall dimensions (LxWxH): 3200 x 2350 x 2000 mm - Weight: approx. 5500 kg ADVANTAGES – Italian manufacture – Double-shaft – Used multi-rip saw, very good condition Net price: 238,900 PLN Net price: 56,880 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (price may change with significant exchange rate fluctuations) Gijdpfx Adjx R Dxxotsl

Kondisi: sangat baik (bekas),

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Shredder EuRec S 20.00 D - siap pakai segera - jam operasi sedikit - tahun pembuatan 2008 Gijdpfx Adex Szdujtel - remote control - dengan suku cadang

Kondisi: baik (bekas), Clamping table, clamping angle plate, T-slot table, rotary table, milling machine table - Clamping angle plate for workpiece clamping Gisdpjb A I Igofx Adtsl - Dimensions: W 380 / H 355 / L 360 mm - Surface: milled - Weight: 50 kg