Beli Mep Shark 270 bekas (116)

Kondisi: baru, Cutting diameter: 300 mm Cutting capacity at 90° (flat): 330 x 260 mm Cutting capacity at 90° (square): 260 x 260 mm Klodjxaav Ajpfx Aa Nel Cutting capacity at 45° (flat): 270 x 200 mm Cutting capacity at 45° (round): 260 mm Cutting capacity at 45° (square): 250 x 250 mm Cutting capacity at 60° (flat): 170 x 170 mm Cutting capacity at 60° (square): 170 x 170 mm Cutting capacity at 60° (round): 180 mm Speed range: 40 / 80 m/min Bandsaw blade dimensions: 3650 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Equipment: - Robust electro-hydraulic semi-automatic bandsaw (INDUSTRIAL) - Mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP EVO microprocessor control for monitoring all functions * Swivels, located at the front right - Optional manual or automatic bow descent * Infinitely variable adjustment of saw bow descent - Carbide blade guides - Hydraulic blade tensioning with digital readout - 2x bandsaw blade speeds - 1x bi-metal bandsaw blade - Coolant system - 1x angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation procedure: - Electro-hydraulic clamping of the vise - Electro-hydraulic lowering of the saw bow - Electro-hydraulic raising of the saw bow - Electro-hydraulic opening of the vise

Kondisi: baru, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 200 mm Cutting capacity at 90° (square): 230 x 230 mm Cutting capacity at 45° (round): 190 mm Cutting capacity at 45° (flat): 180 x 180 mm Cutting capacity at 45° (square): 180 x 180 mm Cutting capacity at 60° (flat): 110 x 110 mm Cutting capacity at 60° (square): 110 x 110 mm Cutting capacity at 60° (round): 120 mm Vice width: 285 mm Speed range: 36 / 72 m/min Saw blade dimensions: 2,950 x 27 x 0.9 mm Total connected load: 1.5 / 1.8 kW Machine weight: approx. 370 kg Space requirements: approx. 1,620 x 1,360 mm Equipment: - Robust electro-hydraulic bandsaw (INDUSTRIAL) - Single-sided mitre cut up to 60° - Automatic saw bow lowering with infinitely variable feed adjustment - Cut-off switch at end of cut - Manual cutting function selectable - 2x saw blade speeds - Saw blade guide made of carbide plates - 1x saw blade Kedpfexaa H Isx Aa Noll - 1x angle stop - Rotating swarf removal brush - Control panel located at front right - Hydraulic pressure accumulator for saw blade tensioning with analogue pressure gauge (manometer) - Machine base - Operating manual in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing system

Kondisi: baru, Cutting capacity 300 mm Cutting capacity at 90 degrees: flat 330 x 260 mm Cutting capacity at 90 degrees: square 260 x 260 mm Cutting capacity at 45 degrees: round 260 mm Cutting capacity at 45 degrees: flat 270 x 200 mm Cutting capacity at 45 degrees: square 250 mm Cutting capacity at 60 degrees: round 180 mm Cutting capacity at 60 degrees: flat 170 x 170 mm Cutting capacity at 60 degrees: square 180 mm Automatic feed 9999.9 mm Minimum feed 2 mm Minimum cutting diameter 5 mm Blade speed 15 – 100 m/min Vice opening 340 mm Saw blade dimensions 3650 x 27 x 0.9 mm Total power requirement 2.2 kW Weight 1240 kg Dimensions (L x W x H) 1800 x 1900 x 1750 mm Features: - Robust electro-hydraulic fully automatic band saw (INDUSTRIAL) - Equipped with additional semi-automatic function, for cuts from 0° to 60° to the left - WINDOWS “CE” based MEP 50 control and 7” touch screen display * Simple and fast setting of all machine parameters * With additional soft keys and backlit display * 10 programs, each with max. 9999 pieces and max. 9999.9 mm in length - Material feed with stepper motor via ball screw * Single stroke of 600 mm, repeatable for any length * Accuracy of ± 0.1/600 mm - Feeder with protective cover and safety limit switch Klsdpfexabwhex Aa Nol - Precise setting of cutting feed rate with indication in mm/min - Positioning of saw head and movement of feeder via joystick - Automatic detection of cutting start - Large dimensioned, adjustable cast steel deflection wheels - Saw blade tension with tension control and display indication - Carbide blade guides for highest cutting precision - Automatic monitoring of cutting load - Quick-adjust vice * With interchangeable clamping and stop jaws - Large, side-mounted chip tray and coolant tank * Equipped with 2 electric pumps for band lubrication and cooling * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating manual in German Info from manufacturer: When installing this saw on a power network with residual-current circuit breaker (RCD), it should be all-current sensitive and not rated below 300 mA. SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing unit

Kondisi: baru, en-GB-001 Ksdsxaaciopfx Aa Nsll

Kondisi: baru, Cutting capacity 300 mm Cutting capacity at 90°: flat 330 x 260 mm Cutting capacity at 90°: square 260 x 260 mm Cutting capacity at 45°: round 260 mm Cutting capacity at 45°: flat 270 x 200 mm Cutting capacity at 45°: square 250 mm Cutting capacity at 60°: round 180 mm Cutting capacity at 60°: flat 170 x 170 mm Cutting capacity at 60°: square 180 mm Automatic feed 9999.9 mm Minimum feed 2 mm Minimum cutting diameter 5 mm Blade speed 15 - 100 m/min Vice opening 340 mm Saw blade dimensions 3650 x 27 x 0.9 mm Total power requirement 2.2 kW Weight 1240 kg Dimensions (LxWxH) 1800 x 1900 x 1750 mm Equipment: - Robust electro-hydraulic fully automatic band saw (INDUSTRIAL) - With additional semi-automatic function, for cuts from 0° to 60° to the left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * Simple and quick setting of all machine parameters * With additional soft keys + backlit display * 10 programs with max. 9999 pieces and max. 9999.9 mm length each - Material feed with stepper motor via ball screw spindle * Single stroke 600 mm repeatable, to cut any length * Accuracy of ± 0.1/600 mm - Feeder with protective cover and safety limit switch - Precise feed rate adjustment with indication in mm/min - Positioning of the saw head and movement of the feeder via joystick - Automatic detection of the cutting start point - Large, adjustable cast steel band wheels - Saw blade tension with tension control and indication on the display - Carbide blade guides for maximum cutting precision - Automatic monitoring of cutting load Kodpfx Aoxaa Ewsa Nsll - Quick-adjust vice * With replaceable clamping and stop jaws - Large, side-extendable swarf tray and coolant tank * Fitted with 2 electric pumps for blade lubrication and cooling * Coolant gun for cleaning the machine - Swarf brush for cleaning the saw blade - Operating manual in German Manufacturer information: When installing this saw on a network with residual current circuit breaker (RCD), it should be all-current sensitive and not less than 300 mA.

Kondisi: bekas, Tahun pembuatan: 2015, sz-20240607-1 Kljdpfxex Hp Dxe Aa Nol

Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), MEP SHARK 330 NC eco ini diproduksi pada tahun 2007. Sebuah mesin gergaji pita logam yang kokoh, memiliki bukaan ragum maksimum 335 mm dan mampu memotong material bulat hingga 300 mm, persegi hingga 250 mm, serta material datar hingga 330 x 250 mm. Ditenagai motor 0,75 kW pada 380 V dan berat 52 kg. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Jenis Aplikasi Pemotongan Kedox Enl Sjpfx Aa Noll

Kondisi: baru, MEP SHARK 382-1 SXI EVO Metal Bandsaw – Hydraulic Semi-Automatic MEP Authorized Dealer – Please send us your inquiry Motor power: 1.5 / 1.8 kW Jaw opening: 385 mm Blade dimensions: 3770 x 27 x 0.9 mm Weight: 695 kg Blade speed: 40/80 m/min Ksdpfx Ajg Hzxioa Njll Cutting capacity 0°: 300 / 250x250 / 380x250 mm Cutting capacity 45° right: 260 / 250x250 / 300x200 mm Cutting capacity 45° left: 240 / 210x210 / 280x160 mm Cutting capacity 60° right: 180 / 170x170 / 200x170 mm Cutting capacity 60° left: Description: Electro-hydraulic, semi-automatic bandsaw with additional manual and semi-automatic dynamic operation, suitable for cuts from 45° right up to 60° left. Key features: - Swiveling control panel mounted on a vertical column - 420 mm large rotary table on roller bearings with preloaded thrust bearing and replaceable steel inserts - Dual blade speed (40/80 m/min)

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, panjang mata gergaji pita: 2.950 mm, lebar pita gergaji: 27 mm, jenis arus masuk: Arus searah (DC), Rentang pemotongan baja bulat pada 45°: 230 mm, Rentang pemotongan baja bulat pada 90°: 250 mm, ketinggian potong (maks.): 285 mm, MEP SHARK 282 CCS [with semi-automatic descent] Article Number: SH282CCS Motor Power: 1.5/1.8 kW Kjdpoxyywmjfx Aa Nell Vise Opening: 285 mm Blade Dimensions: 2950x27x0.9 mm Weight: 440 kg Speed: 36/72 m/min Cutting Capacity 0°: 250 / 220x220 / 280x220 mm Cutting Capacity 45° right: 230 / 200x200 / 220x200 mm Cutting Capacity 45° left: 200 / 170x170 / 200x140 mm Cutting Capacity 60° right: 120 / 80x80 / 140x80 mm Cutting Capacity 60° left: - Description: MEP Bandsaw: Standard equipment: - Quick-action vice with adjustable guide strips - Hydraulic blade tensioning device with tension gauge - Base frame with removable coolant tray - Swarf removal brush - Pre-set precision stops for 0°, 45°, and 60° left and 45° right cuts - Length stop for repetitive cuts - Material support arm, also suitable for attaching roller conveyors/loading side - Swivel table for double mitre cuts - Designed for pallet truck/forklift handling - Bi-metal saw blade M2 for solid and profile material - Tools and operation manual Electrical equipment: - Control panel - Clearly marked cable connections - Power-on indicator light - Main safety switch - Emergency stop button - Speed selector switch - Thermomagnetic protection - Undervoltage release - Control handle IP 55 protected - Phase sequence indicator - Low-voltage system (24 V) - Electric coolant system (48 V) (Retrofit with micro-spray system possible) Motor: 1.5/1.8 kW 2 speeds: 36/72 m/min Vice opening: 285 mm Saw blade: 2950 x 27 x 0.9 mm Weight: 440 kg

Kondisi: baik (bekas), Tahun pembuatan: 1999, nomor mesin/kendaraan: 108401 23-D, Penawaran 25318 Data Teknis: - Mesin gergaji pita manual - Ukuran pisau pita: 2375 x 20 x 0,9 mm - 2 kecepatan pemotongan: 33 / 66 rpm - Kapasitas penjepitan maks.: 205 mm - Sudut kemiringan kiri + kanan: 30° Kjdpjxta N Asfx Aa Nell - Area pemotongan – 90°: bulat 160 mm, persegi 160 mm, datar 200 x 100 mm - Area pemotongan – 45° kiri + kanan: bulat 140 mm, datar 140 x 60 mm - Penggerak: 400 V / 1,5 / 1,8 kW - Sistem pendingin - Jalur rol keluar dengan stopper: 3000 mm - Jalur rol masuk: 1500 mm - Berat: sekitar 350 kg - Kebutuhan tempat: sekitar L 1100 x T 1700 x P 1550 mm

Kondisi: baru, Length: 1500 mm 6 steel tube rollers, width: 185 mm Diameter: 20 mm Ksdpfxofxu Tke Aa Njll Continuously adjustable height: 650 - 1030 mm Space requirement: 1500 x 250 x 650/1030 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0306283/0, - Bandsaw logam yang sangat baik. Performa pemotongan tinggi. - 5 pita gergaji baru - Roller conveyor sekitar 5 m (juga berfungsi penuh) Kodpfx Ajxnartea Nell

Kondisi: baru, Cutting diameter 300 mm Saw band length 3320 x 27 x 0.9 mm Cutting width 300 mm Control NC Cutting range at 90 degrees: flat 330 x 260 mm Cutting range at 90 degrees: square 260 x 260 mm Cutting range at 45 degrees: square 250 mm Cutting range at 45 degrees: flat 270 x 200 mm Cutting range at 60 degrees: round 180 mm Cutting range at 60 degrees: square 170 mm Band speed 15 - 100 m/min Total power requirement 2.2 kW Machine weight approx. 1.1 t Space requirements approx. 3.3 x 2.83 x 2.23 m Equipment: - Electrohydraulic fully automatic bandsaw with additional semi-automatic, semi-automatic dynamic, and manual operation Kedpfx Asfg E H Esa Njll - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic dynamic, and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle allows for direct cuts outside of series production, without programming - Numerically controlled bandsaw machines, featuring the new Windows CE-based controller developed by MEP specifically for automatic machines - User interface with 7" touch screen display and mechanical buttons for machine operating functions - Infinitely variable cutting speed adjustable from 15 to 100 m/min via frequency inverter - Material feed with stepper motor and ball screw - mounted on counter-opposed ball bearings; single stroke 600 mm - Repeatable for any length required - Automatic monitoring of cutting load - via a servo valve mounted directly on the cylinder - Coolant tray integrated into the machine base - Swarf removal brush - Bi-metal saw blade for solid and profile materials - Tools and operating manual including spare parts list

Kondisi: baru, Cutting diameter: 250 mm Kjdpofg E H Nofx Aa Nell Band saw blade length: 2950x27x0.9 mm Table height: mm Band speed: 36/72 m/min Total power requirement: 1.8 kW Machine weight: approx. 440 kg Required space: approx. m Absolute special price!! EUR 7,170 (Current price from 2024 is EUR 9,425) Standard equipment: - Vice with quick adjustment and adjustable guide strips - Hydraulic blade tensioning device with tension pressure indicator - Base frame with removable coolant tray - Chip removal brush - Pre-set precision stops for cuts at: 0°, 45°, and 60° left, and 45° right - Swivel table for double miter cuts - Electric coolant system 48 V (Option to fit a micro-spray device)

Kondisi: baru, Cutting diameter round: 230 mm Cutting diameter square: 230 x 230 mm Saw band length: 2950 x 27 x 0.9 mm Table height: mm Band speed: 15 - 100 m/min Total power requirement: 2.2 kW Machine weight: approx. 1.2 t Dimensions (L x W x H): m SHARK 230-1 NC HS 5.0, electrohydraulic dual-column fully automatic bandsaw with semi-automatic function for 0° cuts in structural steel, stainless steel, steel alloys, solid and profile material, with a maximum remnant piece length of 60 mm. - Maximum cross-section: 230 x 230 mm. - Numerically controlled bandsaw machines featuring the new Windows "CE" based IGE developed specifically by MEP for automatic operation FEATURES: Kodpjfg E Hyefx Aa Njll - User interface with 7" touchscreen display and mechanical buttons for machine operating functions, ensuring reliable operation, ease of use, and intuitive real-time monitoring of all cutting parameters. - Safety enclosure designed in accordance with the latest Machinery Directive EN 13898/2007 safety standards. - New fieldbus communication system with dual microprocessor and serial connection. - Sturdy cast iron structure (G25) for vibration compensation, enhanced machine stability, and reduced saw blade wear.

Kondisi: baru, Cutting diameter: 280 mm Saw band length: 3320 x 27 x 0.9 mm Cutting width: 330 mm Control system: NC Cutting range at 90° (flat): 330 x 260 mm Cutting range at 90° (square): 260 x 260 mm Band speed: 15 - 100 m/min Kedpfx Aaofg E H Dj Noll Total power requirement: 2.2 kW Machine weight: approx. 1.24 t Space requirement: approx. 3.3 x 2.83 x 2.23 m Note: Special promotion price!!! • Fully automatic hydraulic band saw • Miter cuts up to 60° to the left possible • Saw band length: 3650 x 27 x 0.9 mm • Single stroke: 600 mm (programmable up to 10 m) • Simple touchscreen operation • Saw arm made of spheroidal graphite cast iron – robust and stable • Required space: 3.4 m² • Footprint: 1900 mm wide x 1800 mm deep

Kondisi: baru, Cutting diameter: 250 mm Saw band dimensions: 2950 x 27 x 0.9 mm Table height approx. 800 mm Band speed: 36/72 m/min Total power requirement: 1.5/1.8 kW Machine weight approx. 0.37 t Space required approx. ... m MEP Sawing Machine: Saw bow, vice assembly, and base made from robust cast iron Precision angle markings on the cast iron frame Electrical system (with fully identifiable wiring and Kodpfx Aaefg E H Is Nell 24 V low voltage circuit) Control handle IP 55 for manual cycles (if available) Rotating cleaning brush for the saw band Quick-clamping assembly with vice for rapid positioning Accurate end stops with adjustment for mitre cuts at 0°, 45°, 60° to the left Bi-metal saw blade 2950 x 27 x 0.9 mm Tools, operating instructions, and spare parts ordering guides in the user’s language SHARK 281 with manual operation and SHARK 281 CCS with manual operation and automatic cutting via gravity-fed head advance. CCS (Cut Control System) with (A) switch for manual and automatic cutting – (B) speed adjustment – (C) hydraulic brake with reservoir – (D) end stop for halting the blade, also available as retrofit for existing machines. Quick-clamping vice Hydraulic tension display for blade tensioning Electric coolant pump for lubrication and cooling of the saw band, with accessible coolant tray located above the base frame For versions with pneumatic vice (MA), the opening and closing is operated by a manual valve (optionally available with foot pedal control).

Kondisi: baru, Cutting diameter round: 355 mm Cutting diameter square: 350 x 350 mm Saw band length: 4640 x 34 x 1.1 mm Band speed: 15 - 115 m/min Total power requirement: 5.5 kW Machine weight approx.: 2.8 t Dimensions (L x W x H): 3.2 x 2.2 x 2.7 m Automatic electromechanical bandsaw in double-column design for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys, up to a maximum of 350 x 350 mm. Standard equipment includes: - Powered chip conveyor, can be mounted on the right or left side of the machine - Vise clamping pressure regulation - Feed with vertical rollers for lateral material support - Sensors for material detection at the start - Clamping pressure regulation - Storage for up to 300 programs Kjdpfxjfm T Hbo Aa Nsll - The machine is available with either a 34 mm or 41 mm blade at no extra cost Price on request.

Kondisi: baru, Cutting diameter round: 355 mm Cutting diameter square: 350 x 350 mm Saw band length: 4640 x 34 x 1.1 mm Table height: mm Band speed: 15 - 115 m/min Total power requirement: 4.0 kW Machine weight approx.: 2.8 t Dimensions L x W x H: 3.1 x 2.2 x 2.2 m Shark 350 NC HS 5.0, automatic hydraulic band saw with dual-column design for 0° cuts on solid materials and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350x350 mm. Kljdpefg E Hzefx Aa Nsl Standard features include: + Driven chip conveyor, installable on either the right or left side of the machine. + Adjustable clamping pressure for the vises. + Feed system with vertical rollers for lateral material support. + Numerically controlled band saw, which can also be operated semi-automatically, featuring the new MEP 50 control unit, developed specifically by MEP for automatic machines, based on Windows CE. + “Clean cut” cycle: the feeder retracts the workpiece to avoid scoring the cut surface when the band lifts at the end of the cut. + Fieldbus communication system with dual microprocessor and serial connection. + User interface with 7” touchscreen display and mechanical buttons, allowing for operational control of the saw, ensuring reliable, simple, and intuitive operation as well as real-time monitoring of all cutting parameters.

Kondisi: baru, Cutting diameter 350 mm Saw blade length 4640 x 34 x 1.1 mm Kljdpfx Aaowu Hhdo Njl Cutting width 350 mm Control NC 5.0 Blade speed 15 - 100 m/min Cutting range at 0°: round 350 mm Cutting range at 0°: square 350 x 350 mm Table height 860 mm Total power requirement 4 kW Machine weight approx. 2.8 t Shark 350 NC 5.0, automatic hydraulic band saw with double column design for 0° cuts up to a maximum of 350 x 350 mm. Standard features include: - Powered chip conveyor, installable on either the right or left side of the machine. - Clamping pressure regulation for the vises. - Feeder with vertical rollers for lateral support of the material. - Numerically controlled band saw, which can also be operated semi-automatically, equipped with the new MEP 50, a control system developed by MEP specifically for automatic machines, based on Windows “CE”. - "Clean cut" cycle: The feeder retracts the workpiece to avoid scoring on the cut surface when the blade rises again at the end of the cut. - Fieldbus communication system with dual microprocessor and serial connection. - User interface with 7” touchscreen display and mechanical buttons for operating the saw, ensuring reliable, easy, and intuitive use, as well as real-time monitoring of all cutting parameters. Standard equipment: - The Shark 350 NC/CNC HS is supplied with a chip conveyor as standard. - Bi-metal saw blade, tool kit - Mounting adapter for infeed roller conveyor - Material chute for removal of short cut-offs - Forklift/pallet truck entry points Machine available from stock, subject to prior sale.

Tahun pembuatan: 2003, Kondisi: bekas, Cutting capacity – Round: 300 mm Saw blade dimensions: 3320 x 27 x 0.9 mm Cutting capacity – Rectangle: 330 x 260 mm Cutting capacity – Square: 260 mm Control: Evolution Kjdpjra Rrljfx Aa Nsll Working height: 870 mm Saw blade speed: 40 / 80 m/min Machine weight approx. 1050 kg

Kondisi: baru, MEP SHARK 230-1 NC HS 5.0 Twin-Column Metal Band Saw Item number: SH230-1NCHS Motor power: 2.2 kW Vice opening: 235 mm Blade dimensions: 2950x27x0.9 mm Weight: 1,000 kg Speed: 15 - 100 m/min, stepless Cutting capacity at 0°: 230 / 230x230 mm Cutting capacity at 45° right: Cutting capacity at 45° left: Cutting capacity at 60° right: Cutting capacity at 60° left: Description: SHARK 230-1 NC 5.0, electro-hydraulic twin-column fully automatic band saw with semi-automatic and fully automatic modes. Max. remnant piece length: 70 mm. Bundle cutting up to 230 x 230 mm. CNC band saw equipped with the new MEP 50 Windows-based control system. Material feed via stepper motor over ball screw spindle, mounted on opposing ball bearings. Single stroke of 500 mm, repeatable for any cutting length. Easy programming: just enter cut length and quantity, then press "START". Electronic blade tension control. Kjdpfx Aaochhfue Njll Automatic cutting force monitoring via a servo valve located directly on the cylinder. Band rotation control with instant stop in case of band blockage.

Kondisi: baru, MEP SHARK 332-1 CCS metal band saw with semi-automatic descent. MEP Authorized Dealer – Please send us your inquiry! Motor power 1.5/1.8 kW Vice opening 335 mm Blade dimensions 3650 x 27 x 0.9 mm Weight 640 kg Blade speed 40/80 m/min Cutting capacity at 0° 300 / 260x260 / 330x260 mm Cutting capacity at 45° right 260 / 250x250 / 270x200 mm Cutting capacity at 45° left 200 / 180x180 / 200x160 mm Cutting capacity at 60° right 180 / 170x170 / 170x170 mm Cutting capacity at 60° left Description of the MEP Saw: Operation in CCS version: After material is positioned and the vices are closed, the cutting cycle can be started. The saw frame descends by its own weight, balanced by a spring and regulated by a hydraulic brake cylinder. Once the cut is complete, the saw arm is manually lifted to the necessary position for the next loading cycle. Electrical control panel (marked cable connections, readiness indicator, main safety switch lockable with padlock, switch or speed selector, emergency stop, thermal-magnetic protection, 24 volt low-voltage system) Electronic blade tension converter with on-screen display. Manual vice with quick lock. Base frame with coolant tray and chip drawer, which can be replaced with a motorized chip conveyor (optional accessory). Electric coolant pump for band lubrication and cooling. Chip removal brush. Adjustable precision stops for repetitive length cutting. Machine is suitable for pallet truck transport. Bi-metal saw blade for solid and profile material. Tool set and operating instructions included. Motor 1.5/1.8 kW 2 speeds: 40/80 m/min. Vice opening: 335 mm Blade: 3650 x 27 x 0.9 mm Weight: 640 kg Kljdpfx Aascgbt Ro Nol Cutting data – see image. For further technical data, please refer to the attached PDF document.

Kondisi: baru, MEP SHARK 281 CCS metal band saw with semi-automatic lowering. Article number: SH281CCS Motor power 1.5/1.8 kW Vice opening 285 mm Blade dimensions 2950x27x0.9 mm Weight 375 kg Band speed 36/72 m/min Cutting capacity at 0° 250 / 230x230 / 280x200 mm Cutting capacity at 45° right 190 / 180x180 / 180x180 mm Cutting capacity at 45° left - Cutting capacity at 60° right - Cutting capacity at 60° left - Description: - Saw bow, vice assembly, and base made of high-strength cast iron - Precision angle marking on the cast iron frame - Electrical system (with fully identifiable wiring and 24V low-voltage system) - IP 55 control handle for manual cycles (if applicable) - Rotating chip brush for the saw blade - Quick-approach vice closure system - Precise stops with angle cutting adjustment at 0°, 45°, 60° left - Bi-metal saw blade 2950 x 27 x 0.9 mm - Tools, instructions for use, and spare parts ordering guide in the user's language - SHARK 281 with manual operation and SHARK 281 CCS with manual operation and automatic feed cut via gravity. - CCS (Cut Control System) with (A: switch for manual and automatic cut – B: adjustable cutting speed – C: hydraulic brake with reservoir – D: end stop for band shutoff), also available as an option for machines already in service. - Quick-adjust vice - Hydraulic transducer for displaying blade tension - Electric coolant pump for blade cooling and lubrication, with accessible coolant tray above the machine base - For models with pneumatic vice (MA), opening and closing is via manual valve (optional foot pedal available) MEP SHARK 281 SXI evo [Semi-automatic] Article number SH281SXI Motor power 1.5/1.8 kW Vice opening 285 mm Blade dimensions 2950x27x0.9 mm Weight 435 kg Band speed 36/72 m/min Cutting capacity at 0° 250 / 230x230 / 280x200 mm Cutting capacity at 45° right 190 / 180x180 / 180x180 mm Cutting capacity at 45° left - Cutting capacity at 60° right - Cutting capacity at 60° left - Kedpfxscgbp Ie Aa Nell Description Semi-automatic function: Vice closes and motor starts, saw head descends for the cut, motor shuts off, saw head raises, vice opens. Features include: - New centralized control console on articulated arm. - Latest-generation hydraulic control unit: highly efficient and low energy consumption. - Base with removable coolant tank. Machine in full compliance with all CE regulations! For further technical data, please refer to the attached PDF document.

Kondisi: baru, MEP SHARK 350 NC HS 5.0 Fully Automatic Double Column Metal Band Saw Article Number MEP SHARK 350 NC HS 5.0 Motor Power 4.0 kW Table Opening 355 mm Blade Dimensions 4640x34x1.1 mm Weight 2800 kg Blade Speed 15 - 115 m/min, infinitely variable Cutting Capacity 0° 350 / 350x350 mm Cutting Capacity 45° right Cutting Capacity 45° left Cutting Capacity 60° right Cutting Capacity 60° left Description: Fully automatic hydraulic band saw in double column construction for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350x350 mm. Numerically controlled band saw that can also be operated semi-automatically, equipped with the new MEP 50 control system, specifically developed by MEP for automatic machines, based on Windows-2 "CE". Standard features include: Powered chip conveyor, installable to the right or left side of the machine. Adjustable clamping pressure for the vices. Material feeder with vertical rollers for lateral support. Clamping pressure regulation. Up to 100 programs storable. The machine is available with either a 34 mm or 41 mm blade at no additional cost. Kjdpfx Aasi Hmcdj Njll