Beli Mep Shark 281 bekas (8)

Kondisi: baru, Model designation Pgedpfxogvkglj Ab Hsu Shark 281 SXI evo

Kondisi: baru, Cutting diameter: 250 mm Saw band dimensions: 2950 x 27 x 0.9 mm Table height approx. 800 mm Band speed: 36/72 m/min Total power requirement: 1.5/1.8 kW Machine weight approx. 0.37 t Space required approx. ... m MEP Sawing Machine: Saw bow, vice assembly, and base made from robust cast iron Precision angle markings on the cast iron frame Electrical system (with fully identifiable wiring and 24 V low voltage circuit) Psdpfxjfg E H Io Ab Hsgu Control handle IP 55 for manual cycles (if available) Rotating cleaning brush for the saw band Quick-clamping assembly with vice for rapid positioning Accurate end stops with adjustment for mitre cuts at 0°, 45°, 60° to the left Bi-metal saw blade 2950 x 27 x 0.9 mm Tools, operating instructions, and spare parts ordering guides in the user’s language SHARK 281 with manual operation and SHARK 281 CCS with manual operation and automatic cutting via gravity-fed head advance. CCS (Cut Control System) with (A) switch for manual and automatic cutting – (B) speed adjustment – (C) hydraulic brake with reservoir – (D) end stop for halting the blade, also available as retrofit for existing machines. Quick-clamping vice Hydraulic tension display for blade tensioning Electric coolant pump for lubrication and cooling of the saw band, with accessible coolant tray located above the base frame For versions with pneumatic vice (MA), the opening and closing is operated by a manual valve (optionally available with foot pedal control).

Kondisi: baru, MEP SHARK 281 CCS metal band saw with semi-automatic lowering. Article number: SH281CCS Motor power 1.5/1.8 kW Vice opening 285 mm Blade dimensions 2950x27x0.9 mm Weight 375 kg Band speed 36/72 m/min Cutting capacity at 0° 250 / 230x230 / 280x200 mm Cutting capacity at 45° right 190 / 180x180 / 180x180 mm Cutting capacity at 45° left - Pedpfx Ascgbp Ijb Hegu Cutting capacity at 60° right - Cutting capacity at 60° left - Description: - Saw bow, vice assembly, and base made of high-strength cast iron - Precision angle marking on the cast iron frame - Electrical system (with fully identifiable wiring and 24V low-voltage system) - IP 55 control handle for manual cycles (if applicable) - Rotating chip brush for the saw blade - Quick-approach vice closure system - Precise stops with angle cutting adjustment at 0°, 45°, 60° left - Bi-metal saw blade 2950 x 27 x 0.9 mm - Tools, instructions for use, and spare parts ordering guide in the user's language - SHARK 281 with manual operation and SHARK 281 CCS with manual operation and automatic feed cut via gravity. - CCS (Cut Control System) with (A: switch for manual and automatic cut – B: adjustable cutting speed – C: hydraulic brake with reservoir – D: end stop for band shutoff), also available as an option for machines already in service. - Quick-adjust vice - Hydraulic transducer for displaying blade tension - Electric coolant pump for blade cooling and lubrication, with accessible coolant tray above the machine base - For models with pneumatic vice (MA), opening and closing is via manual valve (optional foot pedal available) MEP SHARK 281 SXI evo [Semi-automatic] Article number SH281SXI Motor power 1.5/1.8 kW Vice opening 285 mm Blade dimensions 2950x27x0.9 mm Weight 435 kg Band speed 36/72 m/min Cutting capacity at 0° 250 / 230x230 / 280x200 mm Cutting capacity at 45° right 190 / 180x180 / 180x180 mm Cutting capacity at 45° left - Cutting capacity at 60° right - Cutting capacity at 60° left - Description Semi-automatic function: Vice closes and motor starts, saw head descends for the cut, motor shuts off, saw head raises, vice opens. Features include: - New centralized control console on articulated arm. - Latest-generation hydraulic control unit: highly efficient and low energy consumption. - Base with removable coolant tank. Machine in full compliance with all CE regulations! For further technical data, please refer to the attached PDF document.

Kondisi: baru, Model designation Shark 281 CCS Pedpfx Aegvkcheb Hogu

Kondisi: baru, Cutting diameter 250 mm Cutting capacity at 90 degrees: flat 280 x 220 mm Cutting capacity at 90 degrees: square 220 x 220 mm Speed range: 36 / 72 m/min Saw blade dimensions 2950 x 25.4 x 0.9 mm Machine weight approx. 0.4 t Dimensions LxWxH 1.5 x 0.9 x 1.5 m Pgedofg E H Ropfx Ab Hsu Semi-automatic function: The vice closes and the motor starts, the saw head lowers for cutting, the motor switches off, the saw head lifts, and the vice opens. Some features: - New centralized control console on a swivel arm - High-performance, latest-generation hydraulic control unit with low energy consumption - Base frame with pull-out coolant tank The machine fully complies with all CE regulations!

Kondisi: baru, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 200 mm Cutting capacity at 90° (square): 230 x 230 mm Cutting capacity at 45° (round): 190 mm Cutting capacity at 45° (flat): 180 x 180 mm Cutting capacity at 45° (square): 180 x 180 mm Cutting capacity at 60° (flat): 110 x 110 mm Cutting capacity at 60° (square): 110 x 110 mm Cutting capacity at 60° (round): 120 mm Vice width: 285 mm Speed range: 36 / 72 m/min Saw blade dimensions: 2,950 x 27 x 0.9 mm Total connected load: 1.5 / 1.8 kW Machine weight: approx. 370 kg Space requirements: approx. 1,620 x 1,360 mm Equipment: - Robust electro-hydraulic bandsaw (INDUSTRIAL) - Single-sided mitre cut up to 60° - Automatic saw bow lowering with infinitely variable feed adjustment - Cut-off switch at end of cut - Manual cutting function selectable - 2x saw blade speeds - Saw blade guide made of carbide plates - 1x saw blade Pjdpfx Aoxaa H Ijb Hsgu - 1x angle stop - Rotating swarf removal brush - Control panel located at front right - Hydraulic pressure accumulator for saw blade tensioning with analogue pressure gauge (manometer) - Machine base - Operating manual in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing system

Kondisi: baru, Cutting diameter: 250 mm Cutting range at 90 degrees: flat 280 x 200 mm Cutting range at 90 degrees: square 230 x 230 mm Cutting range at 45 degrees: round 190 mm Cutting range at 45 degrees: flat 180 x 180 mm Cutting range at 45 degrees: square 180 x 180 mm Cutting range at 60 degrees: round 120 mm Cutting range at 60 degrees: square 110 x 110 mm Cutting range at 60 degrees: flat 110 x 110 mm Vice: 285 mm Blade speed range: 36 + 72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Control: MEP NC Coolant tank capacity: 95.0 l Total power requirement: 1.5 / 1.8 kW Pgsdpfx Ajw U U Uwjb Hsu Machine weight: approx. 435 kg Space requirements: approx. 1000 x 2000 mm Equipment: - Robust electro-hydraulic semi-automatic bandsaw (INDUSTRIAL) - Miter cuts up to 60° - MEP microprocessor control EVO for monitoring all functions * positioned front right, rotatable - Optional manual or automatic lowering of the saw bow * infinitely variable adjustment of the saw bow descent - Saw blade guide made from carbide inserts - Hydraulic saw blade tensioning with digital value display - 2x blade speeds - 1x bi-metal saw blade - Coolant system - 1x angle stop - Chip removal brush - Machine base with forklift slots - Operating manual in German Semi-automatic operation functionality: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic lifting of the saw bow - Electro-hydraulic opening of the vice

Kondisi: baru, Cutting diameter: 250 mm Saw blade length: 2950 mm Cutting width: 280 mm Saw blade dimensions: 2950 x 27 x 0.9 mm Cutting range at 90°: flat 280 x 200 mm Cutting range at 90°: square 230 mm Cutting range at 45°: round 190 mm Cutting range at 45°: flat 180 x 180 mm Cutting range at 45°: square 180 mm Cutting range at 60°: round 120 mm Cutting range at 60°: flat 110 x 110 mm Cutting range at 60°: square 110 mm Total power requirement: 1.5 / 1.8 kW Machine weight approx. 0.4 t High-performance mitre band saw for cuts from 0° to 60° to the left CCS (CutControlSystem) for automatic cutting (Infinitely adjustable feed and automatic shutdown at the end of the cut) Description: - Manual cutting cycle - AUTOMATIC CUTTING: (via selector switch) with stepless adjustment of lowering speed and setting of cutting pressure via compensating spring - Sturdy, torsion-resistant and low-vibration saw frame made of cast steel - Quick-release vice - Carbide blade guides for maximum cutting precision Psdpfoppgddsx Ab Hogu - Large, adjustable cast steel band wheels - Hydraulic unit for saw blade tensioning and monitoring with display on manometer (blade tension = 900 kg) - Clearly arranged control panel with all operating elements - Electric coolant pump for cooling and lubricating the saw blade - Chip removal brush for cleaning the saw blade