Beli Mesin Klink bekas (35)

Kondisi: baik (bekas), Mesin Broaching / Mesin Tarik KARL KLINK RSI 2,5 EH -Tahun pembuatan: 1965 -Gaya tarik: 2500Kg / (25KN) -Kecepatan broaching: 1mm/menit hingga 9mm/menit (dapat diatur tanpa langkah) -Stroke maksimal: 800mm -Diameter benda kerja maks.: sekitar 250mm -Motor sekitar 3 KW -Unit pendingin -Indikator gaya tarik -Pembatas gaya tarik -Berbagai bushing penuntun (lihat gambar) -Kaki mesin Fedpfxoymz N Ee Am Sogc Dimensi: PxLxT 1,1x0,7x2 meter / Berat 1600Kg Kesalahan dan kekeliruan dalam pengetikan dapat terjadi.

Kondisi: bekas, Tahun pembuatan: 1963, tinggi total: 1.850 mm, lebar total: 800 mm, panjang total: 3.900 mm, leergewicht-3000-kg-preis-auf-anfrage Fedpfx Amsy Auy Rs Sjgc

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, nomor mesin/kendaraan: 03.2456, CNC internal broaching machine Arthur Klink RISH 6.3X1000X400 Refurbished in 2016 Fodpfx Amoirwiqe Segc

Kondisi: baik (bekas), Tahun pembuatan: 1980, Info: Mesin ini pernah dipasang dalam pit! - Gaya tarik: maks. 25.000 kg - Stroke pendorong: maks. 630 mm - Kecepatan pendorongan: 1 - 10 m/menit - Kecepatan balik: 7 - 25 m/menit - Kebutuhan daya total: 45 kW - Berat mesin: 5.500 kg Atas permintaan, transportasi dan pemuatan dapat diatur ke seluruh Eropa dengan biaya tambahan. Harga belum termasuk PPN. Fjdpfjy H Ia Sox Am Segc Inspeksi dapat dilakukan setelah janji temu. Silakan hubungi kami, tim kami siap membantu Anda. Jual/beli mesin JUAL BELI MESIN PRODUKSI & PENGOLAHAN LOGAM, MESIN PERKAKAS, DAN LAINNYA. Butuh mesin berkualitas dengan harga terjangkau untuk produksi Anda? Atau ingin menjual mesin Anda? Untuk informasi lebih lanjut atau opsi kontak, hubungi kami melalui formulir kontak.

Kondisi: baik (bekas), Tahun pembuatan: 2004, - Daya tarik: maks. 160 kN - Stroke pemrosesan: maks. 1000 mm - Stroke feeder alat: maks. 630 mm - Lebar meja: 630 mm - Kecepatan proses: 10 m/menit - Kecepatan mundur: 23 m/menit - Daya terpasang: maks. 88 kW - Berat mesin: 12.410 kg Transportasi dan pemuatan dapat diatur ke seluruh Eropa atas permintaan dan dengan biaya tambahan. Harga belum termasuk PPN Inspeksi dapat dilakukan sesuai perjanjian. Silakan hubungi kami, tim kami siap membantu Anda. Jual beli mesin PEMBELIAN / PENJUALAN MESIN PRODUKSI & MESIN PENGOLAHAN LOGAM, MESIN PERKAKAS, DAN LAINNYA. Butuh mesin berkualitas dengan harga terjangkau untuk produksi Anda? Atau ingin menjual mesin Anda? Untuk informasi lebih lanjut atau untuk menghubungi kami, silakan gunakan formulir kontak. Fedpoy H Iaxsfx Am Sjgc

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1963, berat keseluruhan: 3.000 kg, panjang total: 3.900 mm, lebar total: 800 mm, tinggi total: 1.850 mm, DETAIL TEKNIS Langkah: 1.500 mm Kapasitas: 10 t Daya motor: 7,5 kW DETAIL MESIN Fgedey Himmspfx Am Ssc Kontrol: Konvensional Dimensi & Berat Dimensi (P x L x T): 3.900 x 800 x 1.850 mm Berat kosong: 3.000 kg Paket transportasi: 2 PERLENGKAPAN Dokumentasi

Kondisi: bekas, Tahun pembuatan: 1990, nomor mesin/kendaraan: 3048 & 3047, en-001 Fedpfx Amjinim To Segc

Tahun pembuatan: 1962, Kondisi: baik (bekas), nomor mesin/kendaraan: 1886, used vertical hydraulic internal broaching machine with 3 broaching stations Pulling force: 10,000 kg Broaching length: 1,200 mm Number of broaching stations: 3 Distance between broaching stations: 380 mm Clamping diameter for broaching heads: 3 x Ø ___ mm Passage width between the cylinders: max. XXX mm Cutting speed: hydraulically steplessly adjustable from 1 m/min to max. 7 m/min Return speed: hydraulically steplessly adjustable from 7 to max. 25 m/min Fodpfxot Dwb Dj Am Segc Machine footprint (W x D x H): approx. 1,300 x 1,450 x 3,350 mm (without pit) Power supply / connected load: 380 Volt 50 Hz / 8.0 kW Accessories / Special equipment: The machine is equipped with a work table featuring 3 bores for 3 broaching stations. The tool clamping system is designed for spring-mechanical locking in the pull bridge as well as the feeder. The machine has an integrated coolant system. Comments: The machine is designed for use in series production; for optimal use, a foundation (pit) or optionally a platform is recommended. Broaching heads and push-out devices are available on request. The machine can be inspected at our warehouse.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1966, berat keseluruhan: 7.000 kg, tegangan masuk: 380 V, panjang broaching: 1.500 mm, jumlah posisi broaching: 3, diameter benda kerja (maks.): 575 mm, tinggi total: 5.100 mm, Manufacturer: Karl Klink Fgodswql Rvepfx Am Soc Model: RSI 20x1500 Year of construction: 1966 Weight: approx. 6,700 kg Machine No.: 2455 General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations Pulling force: 20,000 kg Broaching stroke: 1,500 mm Number of broaching stations: 3 Distance between broaching stations: 2 x 145 mm Chuck diameter for broach heads: 3 x Ø 85 mm Clear width between columns: max. 580 mm Cutting speed: hydraulically infinitely adjustable from 1 m/min up to max. 7 m/min Return speed: hydraulically infinitely adjustable from 7 up to max. 25 m/min Machine dimensions (W x D x H): approx. 1,500 x 2,100 x 4,600 mm (max. 5,100 mm in height with tool shuttle raised) Power supply / Connection rating: 380 Volt, 50 Hz / 14 kW Accessories / Special features: The machine is equipped with a workpiece table with 3 bores for 3 broaching stations. The tool clamping system is designed for spring-actuated locking in the drawbridge and in the shuttle. The machine features an integrated coolant system. Remarks: The machine is designed for use in series production; for optimal use, ideally a foundation (pit) or alternatively a platform is required. Broach heads and pushers are available on request. The machine can be inspected under power in our warehouse. General information We always have a large selection of around 80 used broaching machines in stock, with pulling forces from 3,000 kg up to 63,000 kg, in both horizontal and vertical configurations. A significant number of the broaching machines in stock are available for live demonstration. If required, we can also offer you used equipment such as broach heads, pushers, broaching tools, and other specific accessories. Our company operates as a contract broaching service provider, and we can also assist you with technical inquiries based on 50 years of experience in broaching technology.

Kondisi: bekas, Tahun pembuatan: 1990, maks.: gaya tarik 25.000 KG maks.: panjang alat 3520 mm maks.: kecepatan pemotongan 9,6 m/menit lebar buka lewat 520 mm Mesin ini telah memproses batang penghubung dan tutup batang penghubung. Mesin ini dirancang untuk produksi massal (output 400 buah/jam) Fsdjcm Eiwspfx Am Sjgc

Tahun pembuatan: 1960, Kondisi: bekas, Max. pulling force: 20,000 kg Max. stroke: 1,250 mm Max. cutting speed: from 1 m/min to 7 m/min Max. return speed: from 5 m/min to 25 m/min Max. workpiece diameter: approx. 140 mm Max. tool diameter: approx. 50 mm Broaching stations: 2 units The machine is equipped with a 2-station rotary indexing table. The machine has an automatic tool feeder and is designed for manual series production. Fjdpoui Sbjfx Am Ssgc Tool locking within the pulling bridge and in the tool feeder is carried out via a spring-actuated mechanism (pulling head according to DIN 1417).

Tahun pembuatan: 1956, Kondisi: bekas, nomor mesin/kendaraan: 1413, Manufacturer: Karl Klink Model: RISZ 10x 1200 Year of manufacture: 1956 Weight: 3,450 kg Machine No.: 1413 General Information / Technical Data: Used vertical hydraulic internal broaching machine with up to 3 broaching positions, in operational condition. Pulling force: 13,000 kg (maximum) Broaching length: 1,200 mm Number of broaching positions: 3 Distance between broaching positions: 100 mm Clamping diameter of pull head: Ø 85 mm Clear width between cylinders: max. 390 mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to max. 25 m/min Machine footprint (W x D x H): approx. 1,150 x 1,500 x 3,725 mm (with tool feeder extended) Power supply / Connected load: 380V 50Hz / 7.5 kW Accessories / Special features: The machine's crossbeam is equipped with 3 broaching tool holders; the workpiece table has 1 broaching position (modifiable). The tool clamping system and tool feeder are designed for spring-mechanical locking (DIN 1415). Fgsdpfxsdbmgmj Am Soc The machine is fitted with an automatic tool feeder; the existing feeder can currently accommodate only 1 tool (central broaching position). Integrated coolant system suitable for cutting oil. Notes: The machine is in age-appropriate good condition and ready for immediate use. Designed for manual operation in medium batch production. It features an automatic process cycle. For optimal use, a machine pit or alternatively a platform is required. Pull heads, tool holders, and tools available upon request. The machine can be inspected under power at our warehouse.

Tahun pembuatan: 1951, Kondisi: baik (bekas), nomor mesin/kendaraan: 1133, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1951 Weight: approx. 2,750 kg Machine No.: 1133 General information / technical data: Hydraulic horizontal broaching machine in good operational condition Broaching stroke: 1,500 mm Broaching stations: 1 unit Pulling force: 10,000 kg at 3 m/min (5,000 kg at 7 m/min) Broaching tool clamping: Universal pull head for flat shanks up to 26 mm wide Through bore in clamping table: Ø 105 mm Workpiece diameter: max. 430 mm (limited by oil and chip tray) Fjdpsdcdrpofx Am Sjgc Cutting speed: Hydraulically stepless adjustable from 2 m/min to 7 m/min Return speed: Hydraulically stepless adjustable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 6,200 mm x 700 mm x 1,900 mm (excluding working area) Power supply / connected load: 380 Volt 50 Hz / 8 kW Hydraulic motor: 7.5 kW Accessories / special features: • The machine is equipped with a universal pull head for flat shanks • The machine has an integrated coolant/lubricant system • The machine has an oil and chip tray with a tool feeder carriage Remarks: The machine is ideal for the production of keyways and profiles. The machine runs smoothly and is clean in the areas of the guides and the cylinder. Broaching tools and arbors can be supplied on request. The machine is available for inspection and demonstration under power in our warehouse.

Tahun pembuatan: 1980, Kondisi: baik (bekas), nomor mesin/kendaraan: 03.2123, Manufacturer: Arthur Klink Model: RISZ 25x 2500 x 500 Year of manufacture: 1980 Machine No.: 03.2123 General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations, in very good condition Tensile force: 25,000 kg Fgodpfx Amjdffzfe Sjc Broaching length: 2,000 mm Number of broaching stations: 3 Distance between broaching stations: 160 mm Chuck diameter for broaching heads: 3 x Ø 100 mm Clear width between cylinders (nominal size): 500 mm Clear width between cylinders (measured): max. 590 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely variable from 5 up to max. 25 m/min Machine dimensions (W x D x H): approx. 3,400 mm x 3,400 mm x 6,900 mm (without pit) Power supply / Connected load: 380 Volt 50 Hz / 22 kW Accessories / Special Features: Currently, the machine is without a workpiece table. A sliding workpiece table with a special external broaching clamping device was previously installed (the workpiece sliding table is modifiable). The tool clamping system is equipped with hydraulic locking both in the pull bridge and the feed unit. The machine has a coolant system with integrated chip conveyor. Remarks: The machine is in very good condition and still retains its original paintwork. It is designed for use in series production and, for optimal operation, a foundation (pit) is ideally required. Broaching heads and ejector needles are available on request. The machine can be inspected at our warehouse.

Tahun pembuatan: 1958, Kondisi: bekas, nomor mesin/kendaraan: 1545, en-001 Fedpfx Amjda Ugis Segc

Tahun pembuatan: 1960, Kondisi: diremajakan ulang (bekas), nomor mesin/kendaraan: 1733, Vertical internal broaching machine with indexing table by Karl Klink Model: RSI10DT Machine no.: 1733 Year of manufacture: 1960 Weight: 4.9 t Fgjdpfxegyd S So Am Soc Broaching force: 10,000 kg Equipped with indexing table (2 stations) Power supply: 380 V / 50 Hz Rated current: 35 A Connected load: 7.5 kW The machine has been fully overhauled and is therefore in excellent condition.

Tahun pembuatan: 1994, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 04.2398, Manufacturer: Arthur Klink Model: RIW 10 x 1500 x 500 Machine No.: 04.2398 Year of manufacture: complete overhaul by manufacturer in 1994 Weight: 3,700 kg Pulling force: 10,000 kg (100 kN) Max. stroke: 1,500 mm Fgsdpfxjgyd T Es Am Sec Max. workpiece diameter: Ø 500 mm Broaching speeds: infinitely adjustable from 1 m/min to 6 m/min Return speed: steplessly adjustable up to 20 m/min Electrical connection: 400V / 50Hz

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Manufacturer: Arthur Klink Year of Manufacture: approx. 1960 Type: Horizontal Broaching Machine Model: RH 10-50 Machine No.: 241 Weight: 3,700 kg General / Technical Data: Used horizontal hydraulic internal broaching machine in age-appropriate good condition with manual, heavy-duty tool feeder Broaching stroke: 1,500 mm Pulling force: 10,000 kg (100 kN) Mount in pull bridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Clamping surface (workpiece area): Ø 460 mm Workpiece diameter: max. approx. 750 mm (limited by the tool tray of the feeder) Cutting speed: Hydraulically infinitely variable from 1.0 m/min to 7 m/min Return speed: Hydraulically infinitely variable from 5 m/min to 30 m/min Machine footprint (W x D x H): approx. 6500 mm x 950 mm x 1,400 mm (without working area) Power supply: 380 Volt, 50 Hz Connected load: 8 kW Equipment: • Mechanical-hydraulic control for broaching and return stroke • Integrated coolant and cutting fluid system • Manually operated tool feed • Broaching slide with pull head mount is guided flat on both sides • Adjustable pull force limitation Accessories: • 1 universal pull head for flat shanks from 3 mm up to max. 25 mm width • Adapter sleeve for pull bridge from Ø 85 mm to Ø 63 mm Remarks: Fsdpfx Aer A Hdgsm Sogc The machine is suitable for the production of keyways with flat broaching tools, as well as for profile broaching. Thanks to the machine bed and robust tool feeder, the machine is well suited for heavy-duty profile broaching tools. The machine is used and in very good condition for its age. The machine is located in our warehouse and can be inspected under power. Currently, the machine has not been technically or visually refurbished, but is ready for immediate use. Pull heads for profile broaching are mostly available upon request, depending on DIN standard, dimension, and stock. Direct contact details for us as well as further information can be found in the attached PDF document.

Tahun pembuatan: 1964, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2016, Used vertical hydraulic internal broaching machine with 3 broaching stations Tensile force: 16,000 kg Broaching length: 1,250 mm Broaching stations: 3 units Distance between stations: 380 mm Draw head mounting diameter: 3 x Ø ___mm Fodjt Dv I Aspfx Am Ssgc Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 up to max. 25 m/min Machine footprint (W x D x H): approx. 2,200 x 1,550 x 4,200 mm (without pit) Power supply / Connected load: 380 Volt, 50 Hz Accessories / Special Equipment: The machine is equipped with a workpiece table featuring 3 bores for the 3 broaching stations. The tooling clamping system is designed for spring-actuated locking in the pull bridge and hydraulic-mechanical clamping in the feed unit. The machine was retrofitted electrically (Siemens S7 PLC) and mechanically in 2004. An integrated coolant system is included. Remarks: The machine is designed for series production use; for optimum utilization, a foundation (pit) is ideally required or optionally a raised platform. Draw heads and extractor needles are available upon request. The machine can be inspected at our warehouse.

Tahun pembuatan: 1961, Kondisi: bekas, General / technical data: Vertical duplex external broaching machine with two tables Manufacturer: Karl Klink Model: RSA 10 T/Zw. Year of manufacture: 1961 Weight: approx. 6,500 kg Pulling force: 10 t Broaching speeds: 1 - 11 m/min Return speeds: 7 - 25 m/min Maximum stroke per machine unit: 1,250 mm Clamping surface: 500 x 500 mm Passage width: 380 mm Fedpfjlwu Hrjx Am Sjgc Power supply: 380 Volts / 50 Hz Notes: The machine is powered and available for inspection at our warehouse.

Tahun pembuatan: 1985, Kondisi: baik (bekas), nomor mesin/kendaraan: 04.2187, Hydraulic Internal Broaching Machine in technically good condition Manufacturer: Arthur Klink Fgsdpfx Asixntwem Ssc Year of manufacture: 1985 (overhauled) Weight: 2 t Model: RIW 10 x 1200 x 400 Machine No.: 04.2187 Tensile force: 10,000 kg at 3 m/min Broaching speeds: hydraulically steplessly adjustable from 1 m/min to 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min to 30 m/min Maximum stroke: 1,200 mm Broaching tool clamping: universal pulling head for flat shanks up to 26 mm width Maximum workpiece diameter: Ø max. 480 mm (limited by oil and chip tray) Table opening: Ø 70 mm Power supply: 380 Volt / 50 Hz / 5 kW

Tahun pembuatan: 1960, Kondisi: diremajakan ulang (bekas), nomor mesin/kendaraan: 1732, Vertical internal broaching machine with indexing table from Karl Klink Type: RSI6DT Machine No.: 1732 Year of manufacture: 1960 Fjdpfjgyd Svsx Am Segc Weight: 3.2 tons Broaching force: 6,000 kg With indexing table (2 stations) Power supply: 380V / 50Hz Rated current: 15 A Connected load: 4 kW The machine has been fully overhauled and is therefore in very good condition.

Tahun pembuatan: 1964, Kondisi: diremajakan ulang (bekas), nomor mesin/kendaraan: 2041, Vertical internal broaching machine with index plate by Karl Klink Fedpfxogyd S Do Am Segc Model: RSI8DT1 Machine no.: 2041 Year of manufacture: 1964 Weight: 3.2 t Broaching force: 8,000 kg With index plate (2 stations) Power supply: 380V / 50Hz Rated current: 25 A Connected load: 5.5 kW The machine has been completely overhauled and is thus in very good condition.

Tahun pembuatan: 1965, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2549, General / Technical Data: Used horizontal hydraulic internal broaching machine in age-appropriate good condition with heavy-duty manual tool feeder. Broach stroke: 2,000 mm Pulling force: 25,000 kg (250 kN) Tool holder on pull bridge: Ø 105 mm cylindrical Pass-through bore in clamping table: Ø 125 mm Clamping surface (workpiece area): 440 mm x 440 mm Maximum workpiece diameter: approx. 800 mm (limited by the tool tray of the tool feeder) Cutting speed: hydraulically infinitely variable from 1.5 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Oil capacity: hydraulics approx. 450 L / coolant approx. 100 L Machine footprint: (W x D x H) approx. 8,400 mm x 1,350 mm x 1,800 mm (excluding workspace) Power supply: 380 Volt, 50 Hz Connected load: 19 kW Equipment: • Mechanical-hydraulic control for broaching and return stroke • Integrated coolant/lubricant system • Manually operated tool traverse • The broaching slide with pull head holder is flat-guided on both sides • Adjustable pull force limiter • Pull force display Accessories: • 1 universal pull head for flat shanks up to max. approx. 40 mm width • Dividing attachment (see pictures) • Various special holders and clamping devices • Machine documentation Remarks: The machine is suitable for manufacturing keyways with flat broaching tools as well as for profile broaching. Due to the rigid machine bed and robust tool feeder, the machine is very well suited for heavy-duty profile broaching tools. Machine is used and in a condition appropriate for its age. The machine is available for inspection at our warehouse. Fgjdpfx Aotuuvzsm Sec The machine has just been added to our inventory; it has not yet been technically or visually refurbished. Profile broaching pull heads are available on request, depending on DIN standard, size, and stock condition.

Tahun pembuatan: 1978, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 2751, General / Technical Data: Hydraulic Horizontal Internal Broaching Machine in technically good condition Manufacturer: Karl Klink Model: RIW 6.3 Machine No.: 2751 Year of manufacture: 1978 Weight: 2.3 t Pulling force: 6.3 t Broaching speeds: hydraulically steplessly adjustable from 1 m/min to 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min to 25 m/min Maximum stroke: 1320 mm Maximum workpiece diameter: max. 420 mm Table opening: Ø 80 mm Dimensions (W x D x H): approx. 5,700 mm x 600 mm x 1,900 mm Power supply: 380 Volt / 50 Hz / 4 kW Fgsdpeiw Dlkefx Am Sec Accessories / Special Equipment: - Coolant / lubricant system - Without tool feeder - Oil and chip tray (approx. 2,000 mm) Note: The machine is ideally suited for the production of keyways. Upon request, broaching tools and arbors can also be supplied. The machine is powered up and ready for demonstration in our warehouse.