Beli Mikron Haas Vce 500 bekas (192)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, jam operasional: 3.825 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 214.84.70.265, MIKRON HSM 400 U tahun 2008, sangat sedikit jam operasi Ijdpoxg Rvyjfx Aahotr

Kondisi: bekas, Tahun pembuatan: 1980, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 956.71.80.274, panjang pemakanan sumbu X: 600 mm, panjang umpan sumbu Y: 500 mm, panjang umpan sumbu Z: 400 mm, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 400 mm, tegangan masuk: 400 V, Perlengkapan: dokumentasi / manual, The machine shown is in excellent condition and ready for immediate use. No heavy roughing operations have ever been performed with this machine. Itedpfswnq Sgjx Aahjr The machine is sold together with a vise, including the tool cabinet with the contents as shown. Additionally included are 2 sets of ground parallels, as well as approximately 80 cutters, all in usable condition (some barely used), some like new, mostly with solid carbide coating, suitable for machining steel and aluminum.

Kondisi: bekas, Tahun pembuatan: 1997, Technical details: X travel: 710 mm Y travel: 630 mm Z travel: 500 mm Spindle speed range: 5 – 5,000 rpm Main spindle drive power: 11 kW Tool holder: SK 40 Tool changer: 44 tools Feed rate: 10 m/min Clamping area: 1,200 x 600 mm Table load capacity: 0.5 t Itsdpfx Aaovb Hzreher Total power requirement: 15 kVA Machine weight approx.: 4.24 t Equipped with Heidenhain TNC 426 control, tool changer for 44 tools, all axes with box ways, guides protected by wipers and steel covers. Heidenhain wired handwheel for easy machine setup.

Kondisi: baik (bekas), Tahun pembuatan: 2000, Translation: Isdpji El Iasfx Aahjtr Travel paths: 1350 x 900 x 750 mm Machine control: Heidenhain TNC 426 Equipment: 46-position tool changer, SK 40 milling spindle, 12,000 rpm, including coolant through spindle (IKZ system) and chip conveyor Glass scales, 3D probe: Renishaw MP12 Extensive accessories available upon request! Please contact us if interested!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 29.655 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 73.110, jarak pergerakan sumbu X: 1.350 mm, jarak lintasan sumbu Y: 1.150 mm, jarak gerak sumbu Z: 700 mm, lebar meja: 1.100 mm, beban meja: 1.600 kg, kecepatan spindel (maks.): 12.000 rpm, jumlah slot dalam magazin alat: 92, sudut putar sumbu A (min.): -120 °, sudut putar sumbu A (maks.): 16 °, Insolvency auction – all machines fully functional and ready for demonstration. Property of a German GmbH TECHNICAL DETAILS X-axis (Longitudinal): 1,350 mm Y-axis (Transverse): 1,150 mm Z-axis (Vertical): 700 mm A-axis: +16° / -120° C-axis: n x 360° Simultaneously controlled axes: 5 axes Control system: Heidenhain iTNC 530 Spindle speed: 12,000 rpm Tool magazine: 92 slots Feeds and rapid traverse rates X and Y axes: 15 / 30 m/min Z axis: 15 / 30 m/min A axis: 11 / 20 rpm C axis: 40 rpm Iedpfx Aaevxr I Eshstr Worktable Clamping surface: Ø 1,100 mm Max. workpiece weight: 1,600 kg MACHINE DETAILS Machine weight: 12,600 kg Dimensions: 4,650 x 3,030 x 3,300 mm Connected load: 75 kW Operating voltage: 400 V, 50 Hz Noise protection level: 68 dB(A) Program run time: 34,205 h Spindle hours: 29,655 h EQUIPMENT - Without magnetic table

Tahun pembuatan: 1992, Kondisi: siap digunakan (bekas), X-axis travel: 560mm, Y-axis travel: 500mm, Z-axis travel: 400mm, vertical clamping table dimensions: 300x450mm, number of threaded holes: 2x6, threaded hole spacing: 45mm, thread: M16, angle table clamping surface: 460x800mm, number of T-slots: 7, T-slot spacing: 63mm, T-slot width: 14mm, max. recommended workpiece weight: 350kg. Spindle drive: number of working spindle speeds: 21, speed range (geometrically graduated): 40-4000 rpm, step progression: 1.259, spindle motor power: 3.3 / 4 kW, tool interface: ISO 40 / M16 with draw-in slot, vertical quill stroke: 90mm, infinitely variable feed in all 3 axes: 2–3000mm/min, rapid traverse X and Y axes: 6000mm/min, rapid traverse Z axis: 4000mm/min, feed motor torque (longitudinal and cross): 3.5Nm each, feed motor torque (vertical): 7Nm, control: Heidenhain TNC 407, connected load: 8.7kW, length: 3705mm, width: 2430mm, height: 3100mm, machine weight with vertical milling head and angle table: 2410kg, pallet base weight: 170kg, transport crate weight: 400kg, operating hours: 18,924h. Accessories: 3D probe, 20 tool holders, splash guard cabin, coolant pump, work light, handwheel, machine documentation. An inspection on site is possible. Ijdjxcxz Njpfx Aahetr

Kondisi: belum diuji (bekas), Tahun pembuatan: 2000, jam operasional: 6.191 h, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 7158, jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 600 mm, kecepatan spindel (maks.): 15.000 rpm, jumlah slot dalam magazin alat: 46, No reserve price – guaranteed sale to the highest bidder! Loading can take place on 08.09.2025 or 09.09.2025! TECHNICAL DETAILS Spindle Spindle speed: max. 15,000 rpm Iodow Hq Ifepfx Aahotr Tool Data Tool magazine: 46 positions Tool holder: ISO B40 Travels X-axis travel: 1,000 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Table NC rotary tilt table diameter: 800 mm Rotary Axis Nominal speed: 3,000 rpm Holding torque (100K): 27 Nm Permissible transport load (with clamped tilt axis): 10,000 N Rotary axis speed: 12 rpm Tilting Axis Nominal speed: 3,000 rpm Holding torque (100K): 27 Nm Permissible transport load (5-axis operation): 5,000 N Maximum speed of rotary axis: 4 rpm Control: HEIDENHAIN TNC 426 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,200 x 2,900 x 3,000 mm Weight: 7,500 kg Spindle hours: 6,191 h Power-on hours: 26,997 h EQUIPMENT Technical documentation SK 40 tool holders ATORN 3D measuring probe Note: The tool holders shown in the pictures are included in the scope of sale and delivery; however, the tools clamped in the holders, such as drills, reamers, cutters, etc., are not included in the sale or delivery. The drive unit for the tilting axis of the head is missing.

Kondisi: bekas, Tahun pembuatan: 1995, Technical details: Iedpsw D Hhpefx Aahjtr X-axis travel: 600 mm Y-axis travel: 500 mm Z-axis travel: 450 mm Machine weight approx.: 3.5 t

Tahun pembuatan: 1990, Kondisi: sangat baik (bekas), Mikron WF2S tool milling machine with 3-axis Elesta-Visulesta digital readout. Fixed angular table, SK 40 spindle taper. Machine is in very good, operational condition, sourced from an institute. The machine can be demonstrated under power by appointment. Itedpog Nw Rzefx Aahor

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: KU 4165M, jarak pergerakan sumbu X: 572 mm, jarak lintasan sumbu Y: 322 mm, jarak gerak sumbu Z: 265 mm, kecepatan rotasi (maks.): 15.000 rpm, jumlah slot dalam magazin alat: 22, The value of the supplied spare parts is approx. €70,000 TECHNICAL DETAILS Iedsxamh Eepfx Aahotr Loading modules: 1 module Machining modules: 3 modules Number of spindles: 6 Control System: Bosch Rexroth MTX Part program size: unlimited Remote diagnostics: available Programming: ISO code, simulation via CAM software EdgeCAM Workpiece transport and loading system Loading system: parallel to main time, manual, with 3-axis handling or robot Part feed: paternoster / stack magazine Workpiece changeover (chip-to-chip time): approx. 6 s Axes Travel X: 572 mm Travel Y1/Y2: 322 mm Travel Z: 265 mm Speed X: 40 m/min Speed Y1/Y2: 32 m/min Speed Z: 25 m/min Acceleration X: 8 m/s² Acceleration Y1/Y2: 8 m/s² Acceleration Z: 4 m/s² Feed force X: 1,100 N Feed force Y1/Y2: 1,100 N Feed force Z: 2,500 N Rotational speed B-axis: 1,000 rpm Rotational speed C-axis: 500 rpm Acceleration B-axis: 52 rad/s² Acceleration C-axis: 90 rad/s² Torque B-axis (clamped): 1,000 Nm Torque B-axis (unclamped): 287 Nm Torque C-axis (clamped): 300 Nm Torque C-axis (unclamped): 187 Nm Working spindle Tool interface: HSK 40-A External diameter: 108 mm Speed: 15,000 rpm Torque (S6 45% duty cycle): 85 Nm Power (S6 45% duty cycle): 18 kW Internal coolant supply up to: 120 bar Spindle distance: 200 mm Workpiece Repeatability: +/- 2 µm Clamping force: approx. 10 kN (self-locking) Diameter: 140 mm Length: 180 mm Weight: 21 kg Workpiece clamping Clamping system: EROWA clamping system Actuation: pneumatic, 6 bar Tool changer Tool discs: externally pre-loadable with position coding, diameter: Ø 290 mm Tools (2 discs with 12 positions each) per machining module: 22 Tool disc weight: 5 kg Max. tool weight: 2.5 kg Max. free tool length: 186 mm Max. tool diameter: 63 mm Max. tool diameter with free position: 105 mm Shortest chip-to-chip time: ≥ 1 s Max. total weight of tools on disc: 15 kg Positioning time per tool increment: 250 ms Tool holder: HSK 40-A, according to DIN 69893 MACHINE DETAILS Machine dimensions (L x W x H): approx. 9,300 x 3,400 x 3,500 mm Weight per machining module: approx. 4.5 t Weight per loading module: approx. 2.5 t

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jam operasional: 21.967 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 84.34, jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 1.150 mm, jarak gerak sumbu Z: 700 mm, lebar meja: 1.000 mm, beban meja: 1.100 kg, kecepatan spindel (maks.): 15.000 rpm, jumlah slot dalam magazin alat: 46, sudut putar sumbu A (min.): -120 °, sudut putar sumbu A (maks.): 16 °, Insolvency auction – all machines operational and ready for demonstration. Property of a German GmbH TECHNICAL DETAILS X-Axis (Longitudinal): 1,000 mm Y-Axis (Transverse): 1,150 mm Z-Axis (Vertical): 700 mm A-Axis: +16° / -120° Itjdpjvxr Ilefx Aaher C-Axis: n x 360° Simultaneously controlled axes: 5 axes Control unit: Heidenhain iTNC 530 Spindle speed: 15,000 rpm Tool magazine: 46 slots Feeds and traverse speeds X and Y axes: 15 / 30 m/min Z axis: 15 / 30 m/min A axis: 11 / 20 rpm C axis: 40 rpm Worktable Clamping surface: Ø 1,000 mm Max. workpiece weight: 1,100 kg MACHINE DETAILS Machine weight: 12,300 kg Dimensions: 4,600 x 3,030 x 3,300 mm Connected load: 75 kW Operating voltage: 400 V, 50 Hz Noise protection level: 68 dB(A) Operating hours: 40,095 h Spindle hours: 21,967 h EQUIPMENT - without magnetic table

Kondisi: baik (bekas), Tahun pembuatan: 1995, Die Maschine ist in gutem Betriebszustand. Itodpfx Aaouzimnshor Steuerungseinheit: TNC 426

Kondisi: bekas, Tahun pembuatan: 1985, Wheel diameter – max. 80 mm Wheel width 150 mm Module – max. 2.5 Module – min. Total power requirement 10 kW Machine weight approx. 2400 kg Ijdpfx Aaet Hw D Rjhjtr Fully automatic hobbing machines for worm gears Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: Max. gear diameter without loading magazine approx. 80 mm Max. gear diameter with loading magazine approx. 50 mm Module max. 2 / 2.5 Axial milling length approx. 150 mm Max. workpiece installation length approx. 200 mm Milling slide swivels up to 90 degrees Cutter diameter 24 – 50/63 mm Max. radial travel of milling slide 0–14/18 mm Max. cutter shift 25 mm Cutter speeds 212 – 2,000 rpm Axial feed range, stepless 0.05 – 4.0 mm/rev Radial feed range, stepless 0.2 – 200 mm/min Milling spindle drive 3 kW Total drive approx. 10 kW – 50 Hz – 380 Volt Weight approx. 2,400 kg Accessories / Special equipment: Fully automatic workflow and minimal idle times thanks to freely programmable SIEMENS S5 PLC control for all processing steps such as rapid traverse, feed, cutter on/off, for the loading device, tailstock, optional shifting, etc., and with part counter, program numbering, and 30-stage numerical fault display. Pneumatic workpiece loading and unloading device aligned parallel to the workpiece axis for shaft-type parts approx. 140 mm long x 8 mm diameter, with pneumatic double gripper for feeding and removing workpieces; blanks are loaded externally in exchange cassettes and inserted into the loading unit. The double gripper places the parts between workpiece spindle and tailstock, the tailstock quill pushes the parts into the main spindle collet, clamping them simultaneously. Finished parts are ejected from the main spindle and returned by the gripper to the (finished parts) cassette. The entire process is electronically monitored and controlled. The entire loading device is enclosed in Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: good – 3 machines available, currently 1 machine ready for demonstration (powered), Machine is set up for hobbing worm shafts/armature shafts used in variable transmission drives for vehicle seats, window winders, etc.

Kondisi: bekas, Tahun pembuatan: 2008, x-travel 1,850 mm y-travel 1,400 mm z-travel 720/905 mm Control system SIEMENS SL 840 D Spindle speeds 15,000 rpm B-axis -20 / +120 ° Tool holder HSK-A63 Tool magazine with 45 stations Maximum tool length 365 mm Tool diameter with adjacent stations occupied 90 mm Tool diameter with adjacent stations free 130 mm NC rotary table 1,600 mm T-slots 12 Slot width 18H12 Slot spacing 100 mm Itsdevxwuwjpfx Aahor Table load capacity max. 3,000 kg Max. table rotation speed 30 rpm Total power requirement 89 kW Machine weight approx. 26 t Required space approx. 7.00 x 6.20 x 4.15 m 5-axis machining center with Siemens SINUMERIK 840D control, BLUM laser, Renishaw, RotoClear, fire suppression system, 2x electronic handwheel, Steptec spindle, spindle oil cooler, ICS, high-pressure pump, Bürener coolant belt filter system, chip conveyor. The machine can be inspected under power.

Kondisi: bekas, Tahun pembuatan: 1995, Horizontal travel (X-axis): 750 / 1000 mm y-travel: 600 mm z-travel: 600 mm Control: Heidenhain TNC 426 Machine weight approx. 6,500 kg Space requirement approx. 2,500 x 3,300 x 2,500 mm MIKRON VC 750/1000 – CNC Vertical Machining Center Travel distances: X-axis: approx. 750 / 1000 mm Y-axis: approx. 600 mm Z-axis: approx. 600 mm Table: Table size: approx. 1,080 x 580 mm Number of T-slots: 7 T-slot spacing: 90 mm T-slot width: 14 mm Max. table load: approx. 1,000 kg Spindle: Spindle speed: 50 – 5,000 rpm Spindle taper: ISO 40 Spindle power: approx. 11 kW Tool changer: Number of tool stations: 30 – 36 Tool holder: ISO 40 Feed and rapid traverse: Rapid traverse X/Y/Z: approx. 15 m/min Isdpfowm Rqyjx Aahstr Control: Heidenhain TNC 426 Machine dimensions and weight: Dimensions (L x W x H): approx. 2,500 x 3,300 x 2,500 mm Weight: approx. 6,500 kg

Kondisi: bekas, ACCESSORIES Itedpfxjuhbqpo Aahor - With Zellio SR3 automatic feeder - Tilting loading magazine No. 11 and vibrator - Piece diameter 2.50 to 12.5 [mm] - Piece length 0.30 to 30 [mm]

Kondisi: baik (bekas), Tahun pembuatan: 1990, 1 used universal tool milling machine Manufacturer: Mikron Model: WF 2 SA Year of manufacture: 1990 Itodpfxorywgzs Aaher Equipped with Heidenhain Active Digital Readout TNC 114 Infinitely variable feed Work lamp Coolant system Travel (X / Y / Z): 420 / 250 / 345 mm Spindle speeds: 50 – 2240 rpm Clamping surface: 635 x 250 mm Feed rate in 3 axes: 0 – 750 mm/min Rapid traverse in 3 axes: 1400 mm/min Tool holder: ISO 40 Vertical/horizontal quill extendable Dimensions (approx.): 1.2 x 1.2 x 1.6 m Weight (approx.): 1200 kg

Kondisi: bekas, PLC control, electronic modules, PLC module, plug-in card PCB, printed circuit board - Manufacturer: Mikron, electronic module circuit board for h. TCD22 Ovp - Type: WW TCD 22 . 104.73.20.041 Ijdpfx Aek Aua Nsahetr - Carton dimensions: 410/310/H65 mm - Weight: 0.6 kg

Kondisi: bekas, Tahun pembuatan: 1982, x-travel 400 mm y-travel 400 mm z-travel 380 mm Total power requirement 2.6 kW Machine weight approx. 1,500 kg O F F E R We can offer you the following ex-stock, subject to prior sale and errors: MIKRON Universal Tool Milling Machine with Digital Readout Model: WF 2/3 S Year: ca. 1981 21S0401 _____ Working range: Longitudinal travel X-axis 400 mm Cross travel Y-axis 400 mm Vertical travel Z-axis 380 mm Fixed angular table approx. 450 x 800 mm Installation height under spindle approx. 65 – 445 mm Spindle taper SK 40 12 spindle speeds 50 – 2,240 rpm Quill stroke 110 mm Infinitely variable feed XYZ 1 – 630 mm/min Rapid traverse XYZ 1,400 mm/min Spindle drive power 2.6 kW Total drive approx. 5 kW – 380 V – 50 Hz Weight approx. 1,500 kg Equipment / Special features: • HEIDENHAIN 2-axis digital readout for longitudinal and cross travel • Infinitely variable feed on all 3 axes with rapid traverse • Handwheels for all 3 axes for sensitive manual operation • Vertical head (swiveling +/- 90°) with quill and swing-away device for use of the horizontal spindle • Hydraulic tool clamping for horizontal and vertical spindle Isdpfxsu U Sabo Aahjtr • Fixed angular table 450 x 800 mm mounted • Integrated coolant system, attached electrical cabinet, central lubrication • Tool cabinet with extensive set of tool holders, horizontal milling device with various horizontal arbors, additional angular milling head, various operating tools • Work lamp, central lubrication, table exchange device This machine is still a “genuine” Mikron milling machine, manufactured in proven Swiss quality. It is ideal for both toolmaking and training purposes. Condition: Very good! Only used in toolmaking. Delivery: Ex stock, immediate availability, FCA Metzingen Payment: strictly net – payment due upon receipt of invoice A constant selection of universal and CNC milling machines of all types available from stock – Please ask for alternatives as well!

Kondisi: hampir baru (bekas), Tahun pembuatan: 2001, x-travel 600 mm y-travel 450 mm z-travel 450 mm Machine weight approx. 6,500 kg Required space approx. 3,900 x 3,500 x 2,700 mm MIKRON VCP 600 – CNC Vertical Machining Centre (Year of manufacture: 2001) Itodpfx Aewmzgfjahjr The MIKRON VCP 600 is a precise 3-axis CNC vertical machining centre, ideally suited for high-precision machining of complex workpieces. With its robust construction, powerful spindle and reliable Heidenhain control, it meets the highest standards for both single-part and series production. All details are provided without guarantee. Exact technical data available upon purchase. Control: TNC 426/430 Axis Travel X-axis: 600 mm Y-axis: 450 mm Z-axis: 450 mm Table Table size: 850 x 530 mm Maximum table load: 400 kg Number of T-slots: 6 T-slot spacing: 63 mm T-slot width: 14H12 mm Spindle Spindle speed: 100 – 20,000 rpm Spindle power: 12 / 16 kW Tool taper: HSK-A63 Tool Changer Number of tool stations: 30 Max. tool diameter: 90 mm Max. tool diameter with empty adjacent pockets: 110 mm Max. tool length: 250 mm Max. tool weight: 6 kg Chip-to-chip time: approx. 7 seconds Feed and Rapid Traverse Feed rate: 0 – 22,000 mm/min Rapid traverse: 22 m/min Feed force (X/Y/Z): 5,000 N Dimensions and Weight Machine weight: approx. 6,500 kg Floor space required (L x W x H): approx. 3,900 x 3,500 x 2,700 mm

Kondisi: bekas, TECHNICAL DATA - Table dimensions: 350 x 800 [mm] Iedpfouhbxaex Aahjtr - T-slots: 7 - Travel, x, y, z: 400, 400, 370 [mm] - Spindle speed: 50 - 2240 [rpm] - Rapid traverse speed with potentiometer: 0 - 630 [mm/min] ACCESSORIES - 3-axis display HEIDENHAIN - Splash guard

Kondisi: bekas, Safety switch, protective gate switch, limit switch, push button, circuit breaker, position switch, magnetic interlock switch, safety interlock - Manufacturer: Schmersal, safety interlock from CNC milling machine Mikron UME 600 - Type: AZM 161SK-33rka-024 IEC 60947-5-1 - Serial No.: see photo of nameplate - Transport dimensions: 270/260/H60 mm - Weight: 1.5 kg Iedsrcnm Nopfx Aahetr

Kondisi: bekas, Tahun pembuatan: 1992, Wheel diameter – max. 150 mm Wheel width: 300 mm Module – max.: 4.5 Module – min.: [not specified] Total power requirement: 20 kW Machine weight: approx. 6 t Floor space required: [not specified] CNC-controlled horizontal gear hobbing machine with workpiece portal loading system, Type A 35 / 36 CNC, year of manufacture 1992 Workpiece diameter / wheel diameter for automatic loading, max.: 150 mm Workpiece diameter for manual loading, max.: 200 mm Maximum workpiece length: approx. 400 mm Axial hobbing length (Z-axis): 300 mm Module range HSS/Carbide cutters: 3 / 4.5 mm Number of teeth, min./max.: 2-999 Distance between tool and workpiece, min./max.: 0 - 190 mm Maximum workpiece spindle speed: 0-350 rpm Swivel range of milling slide left/right: 50° / 60° Cutter size (diameter x length): 102 x 230 mm Cutter displacement max. (Y-axis): 100 mm Radial slide travel max. (X-axis): 10-150 mm Tailstock travel max. (W-axis): 420 mm Cutter speeds stepless: 0 - 1,500 rpm Feed rates all axes steplessly adjustable: 3.5 or 4 m/min Spindle drive approx.: 8.8 kW Total drive approx.: 20 kW - 220 V/400 V / 50 Hz Weight approx.: 6,000 kg Accessories / Special equipment: MIKRON CNC control type 788 (BWO) with monitor for up to 8 axes (ABC and WYZ and WV) with conversational programming for the creation of various gearing cycles, such as helical gearing, worm and worm gear cutting, crowned gearing, with and without shifting, as well as further sub-programs. Heavy-duty shifting milling head with high cutter speeds and a long shifting travel, suitable for 2 cutters, with quick-change system and hydraulic counter bearing. Workpiece spindle head (C) with quick-change system (collet chuck). Isdpfjt Hwxbsx Aahetr Heavy-duty tailstock with travel 420 mm (W), in combination with an automatic workpiece loading unit, make GÜDEL-Switzerland, with linear portal loader, approx. 1000 mm stroke (V), double gripper with jaws for loading and unloading shaft-shaped workpieces (currently approx. 60 mm long x 25 mm Ø x module 1.5), but without workpiece storage system. Separate coolant unit with magnetic chip conveyor. Comprehensive full enclosure with sliding doors. 2 machines with workpiece marking unit, make BORRIES, unfortunately no other accessories.

Kondisi: bekas, PLC control, electronic modules, PLC module, plug-in card circuit board, PCB, printed circuit board -Manufacturer: Mikron, electronic module PCB from CNC milling machine Mikron UME 600 -Type: 958 78 11 200 -Dimensions: 145/110/H55 mm Iederc Ilgjpfx Aahotr -Weight: 0.4 kg

Kondisi: bekas, Transformer, Trafo, Converter, Three-phase Autotransformer, Three-phase Transformer -Manufacturer: LAPP, three-phase transformer removed from CNC milling machine Mikron WF 51C/155 -Type: DT Iodpskzpm Hjfx Aahjtr -Power: 300 VA -Primary: 3x380 V -Technical data: see nameplate photo -Dimensions: 150/90/H150 mm -Weight: 5.7 kg