Beli Mikron Um 600 bekas (180)

Kondisi: bekas, Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, DATA TEKNIS Pergerakan sumbu X: 1200 mm Pergerakan sumbu Y: 600 mm Pergerakan sumbu Z: 675 mm Kecepatan poros utama: 30 - 8000 rpm Holder alat: ISO B 40 Nsdsw Iqf Sspfx Ab Nswn Feed X/Y/Z: 3000 rpm Gerakan cepat X,Y / Z: 24 / 20 m/menit RINCIAN MESIN Tegangan: 3 x 400 V AC + PE, 50/60 Hz Tegangan kontrol: 24 V DC Beban terhubung: 16 kW Berat: 8000 kg

Kondisi: bekas, Tahun pembuatan: 1985, Wheel diameter – max. 80 mm Wheel width 150 mm Module – max. 2.5 Module – min. Total power requirement 10 kW Machine weight approx. 2400 kg Fully automatic hobbing machines for worm gears Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: Max. gear diameter without loading magazine approx. 80 mm Max. gear diameter with loading magazine approx. 50 mm Module max. 2 / 2.5 Axial milling length approx. 150 mm Max. workpiece installation length approx. 200 mm Milling slide swivels up to 90 degrees Cutter diameter 24 – 50/63 mm Max. radial travel of milling slide 0–14/18 mm Max. cutter shift 25 mm Cutter speeds 212 – 2,000 rpm Nwjdpst Hw D Refx Ab Njn Axial feed range, stepless 0.05 – 4.0 mm/rev Radial feed range, stepless 0.2 – 200 mm/min Milling spindle drive 3 kW Total drive approx. 10 kW – 50 Hz – 380 Volt Weight approx. 2,400 kg Accessories / Special equipment: Fully automatic workflow and minimal idle times thanks to freely programmable SIEMENS S5 PLC control for all processing steps such as rapid traverse, feed, cutter on/off, for the loading device, tailstock, optional shifting, etc., and with part counter, program numbering, and 30-stage numerical fault display. Pneumatic workpiece loading and unloading device aligned parallel to the workpiece axis for shaft-type parts approx. 140 mm long x 8 mm diameter, with pneumatic double gripper for feeding and removing workpieces; blanks are loaded externally in exchange cassettes and inserted into the loading unit. The double gripper places the parts between workpiece spindle and tailstock, the tailstock quill pushes the parts into the main spindle collet, clamping them simultaneously. Finished parts are ejected from the main spindle and returned by the gripper to the (finished parts) cassette. The entire process is electronically monitored and controlled. The entire loading device is enclosed in Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: good – 3 machines available, currently 1 machine ready for demonstration (powered), Machine is set up for hobbing worm shafts/armature shafts used in variable transmission drives for vehicle seats, window winders, etc.

Kondisi: baik (bekas), Tahun pembuatan: 1999, Die Maschine ist in gutem Zustand. Njdpfswx Rafjx Ab Njwn X 750 mm Y 400 mm Z 500 mm 10.000 U/min

Kondisi: bekas, Tahun pembuatan: 1986, jam operasional: 66.247 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 600 mm, Mesin dalam kondisi baik dan masih beroperasi. Nedpfewccfhox Ab Nown Tahun pembuatan: 1986 Pergerakan: X 600 / Y/Z 500 Waktu menyala: 66.247 jam Catatan: - Harga TIDAK termasuk aksesori! - Pengambilan oleh pembeli, dari lokasi. - Tanggal pengambilan ditentukan sesuai kesepakatan dengan penjual. - Tanpa garansi - Pembayaran di muka (faktur) atau tunai saat pengambilan

Kondisi: baik (bekas), Mikron WF 32 CH Universal Milling Machine Machine equipped with chip and splash guard enclosure Fitted with a Heidenhain TNC355 control unit Technical Specifications Nedewit Rhopfx Ab Newn Manufacturer: Mikron Model: WF 32 CH Control: Heidenhain TNC355 Travel: X 560 mm, Y 500 mm, Z 400 mm Clamping surface: 530 x 900 mm Rapid traverse: X, Y 6,000 mm/min, Z 5,000 mm/min Spindle speed: 20 – 6,300 rpm Dimensions: 2,700 x 2,000 x 2,400 mm Weight: 2,400 kg More items – new and used – available in our shop! International shipping costs upon request!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1994, Stations: 24, Substations: 20, Side stations: 20, Axes: 2 per station, Collets: 24, Production capacity single/double cycle: 120/240 pcs/min, Stroke: 35mm, Max. workpiece diameter: 25mm, Spindle speed: 20,000 rpm, Machine weight: approx. 2,650 kg, Control: Mikron MAC 50, Operating hours: approx. 17,335 h. Documentation available. On-site inspection possible. Njdpfxow Emx Rj Ab Njwn

Kondisi: baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, Mesin dalam kondisi baik, suku cadang yang ditunjukkan secara manual tidak termasuk dalam paket. X 1025 mm Ljbijwx N Nfsa A Hkmsad Y 560 mm Z 600 mm Heidenhain TNC 620, 16.000 rpm, HSK 63 Nwedpfx Asw Dbt Teb Non

Kondisi: bekas, Tahun pembuatan: 1982, x-travel 400 mm y-travel 400 mm z-travel 380 mm Total power requirement 2.6 kW Machine weight approx. 1,500 kg O F F E R We can offer you the following ex-stock, subject to prior sale and errors: MIKRON Universal Tool Milling Machine with Digital Readout Model: WF 2/3 S Year: ca. 1981 21S0401 _____ Working range: Longitudinal travel X-axis 400 mm Cross travel Y-axis 400 mm Vertical travel Z-axis 380 mm Fixed angular table approx. 450 x 800 mm Installation height under spindle approx. 65 – 445 mm Spindle taper SK 40 12 spindle speeds 50 – 2,240 rpm Quill stroke 110 mm Infinitely variable feed XYZ 1 – 630 mm/min Rapid traverse XYZ 1,400 mm/min Spindle drive power 2.6 kW Total drive approx. 5 kW – 380 V – 50 Hz Weight approx. 1,500 kg Equipment / Special features: • HEIDENHAIN 2-axis digital readout for longitudinal and cross travel • Infinitely variable feed on all 3 axes with rapid traverse • Handwheels for all 3 axes for sensitive manual operation • Vertical head (swiveling +/- 90°) with quill and swing-away device for use of the horizontal spindle Nwsdsu U Sabopfx Ab Nsn • Hydraulic tool clamping for horizontal and vertical spindle • Fixed angular table 450 x 800 mm mounted • Integrated coolant system, attached electrical cabinet, central lubrication • Tool cabinet with extensive set of tool holders, horizontal milling device with various horizontal arbors, additional angular milling head, various operating tools • Work lamp, central lubrication, table exchange device This machine is still a “genuine” Mikron milling machine, manufactured in proven Swiss quality. It is ideal for both toolmaking and training purposes. Condition: Very good! Only used in toolmaking. Delivery: Ex stock, immediate availability, FCA Metzingen Payment: strictly net – payment due upon receipt of invoice A constant selection of universal and CNC milling machines of all types available from stock – Please ask for alternatives as well!

Kondisi: baik (bekas), Tahun pembuatan: 2015, Die Maschine ist in gutem Zustand, die per Hand gezeigten Teile sind nicht im Lieferumfang enthalten. Njdewx N Nfepfx Ab Nswn X 1025 mm Y 560 mm Z 600 mm Heidenhain TNC 620, 16.000 U/min, HSK 63

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 29.655 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 73.110, jarak pergerakan sumbu X: 1.350 mm, jarak lintasan sumbu Y: 1.150 mm, jarak gerak sumbu Z: 700 mm, lebar meja: 1.100 mm, beban meja: 1.600 kg, kecepatan spindel (maks.): 12.000 rpm, jumlah slot dalam magazin alat: 92, sudut putar sumbu A (min.): -120 °, sudut putar sumbu A (maks.): 16 °, Insolvency auction – all machines fully functional and ready for demonstration. Property of a German GmbH TECHNICAL DETAILS X-axis (Longitudinal): 1,350 mm Y-axis (Transverse): 1,150 mm Z-axis (Vertical): 700 mm A-axis: +16° / -120° C-axis: n x 360° Simultaneously controlled axes: 5 axes Control system: Heidenhain iTNC 530 Spindle speed: 12,000 rpm Tool magazine: 92 slots Feeds and rapid traverse rates X and Y axes: 15 / 30 m/min Z axis: 15 / 30 m/min A axis: 11 / 20 rpm C axis: 40 rpm Worktable Clamping surface: Ø 1,100 mm Max. workpiece weight: 1,600 kg Nsdpfxovxr I Eo Ab Nown MACHINE DETAILS Machine weight: 12,600 kg Dimensions: 4,650 x 3,030 x 3,300 mm Connected load: 75 kW Operating voltage: 400 V, 50 Hz Noise protection level: 68 dB(A) Program run time: 34,205 h Spindle hours: 29,655 h EQUIPMENT - Without magnetic table

Kondisi: bekas, Tahun pembuatan: 1985, x-axis travel 500 mm y-axis travel 500 mm z-axis travel 350 mm Table surface 800 x 450 mm Spindle taper: ISO 40 Quill stroke mm Nedpfotv Ia Tsx Ab Nswn Feeds - longitudinal and cross mm/min Feeds - vertical mm/min Speed range max. 3150 rpm Supply voltage 380 V / 50 Hz Drive power 4 kW Machine weight approx. 1.7 t Space requirement approx. 2.5 x 2.3 x 2.0 m Control HEIDENHAIN TNC 155, with electronic handwheel, various tool holders, new bevel gear set,

Kondisi: baik (bekas), Tahun pembuatan: 1990, 1 used universal tool milling machine Manufacturer: Mikron Model: WF 2 SA Year of manufacture: 1990 Equipped with Heidenhain Active Digital Readout TNC 114 Infinitely variable feed Work lamp Nwjdpferywgzox Ab Nen Coolant system Travel (X / Y / Z): 420 / 250 / 345 mm Spindle speeds: 50 – 2240 rpm Clamping surface: 635 x 250 mm Feed rate in 3 axes: 0 – 750 mm/min Rapid traverse in 3 axes: 1400 mm/min Tool holder: ISO 40 Vertical/horizontal quill extendable Dimensions (approx.): 1.2 x 1.2 x 1.6 m Weight (approx.): 1200 kg

Kondisi: bekas, Tahun pembuatan: 2000, x-travel 1000 mm y-travel 1040 mm z-travel 750 mm Control Heidenhain TNC 426 Spindle speed 15,000 rpm Nwjdstig D Ijpfx Ab Nsn Total power requirement 40 kW Machine weight approx. 10.1 t Space requirement approx. / m Incl. handwheel and documentation

Kondisi: bekas, Tahun pembuatan: 1992, Wheel diameter – max. 150 mm Wheel width: 300 mm Module – max.: 4.5 Module – min.: [not specified] Total power requirement: 20 kW Machine weight: approx. 6 t Floor space required: [not specified] CNC-controlled horizontal gear hobbing machine with workpiece portal loading system, Type A 35 / 36 CNC, year of manufacture 1992 Workpiece diameter / wheel diameter for automatic loading, max.: 150 mm Workpiece diameter for manual loading, max.: 200 mm Maximum workpiece length: approx. 400 mm Nodot Hwxbspfx Ab Nown Axial hobbing length (Z-axis): 300 mm Module range HSS/Carbide cutters: 3 / 4.5 mm Number of teeth, min./max.: 2-999 Distance between tool and workpiece, min./max.: 0 - 190 mm Maximum workpiece spindle speed: 0-350 rpm Swivel range of milling slide left/right: 50° / 60° Cutter size (diameter x length): 102 x 230 mm Cutter displacement max. (Y-axis): 100 mm Radial slide travel max. (X-axis): 10-150 mm Tailstock travel max. (W-axis): 420 mm Cutter speeds stepless: 0 - 1,500 rpm Feed rates all axes steplessly adjustable: 3.5 or 4 m/min Spindle drive approx.: 8.8 kW Total drive approx.: 20 kW - 220 V/400 V / 50 Hz Weight approx.: 6,000 kg Accessories / Special equipment: MIKRON CNC control type 788 (BWO) with monitor for up to 8 axes (ABC and WYZ and WV) with conversational programming for the creation of various gearing cycles, such as helical gearing, worm and worm gear cutting, crowned gearing, with and without shifting, as well as further sub-programs. Heavy-duty shifting milling head with high cutter speeds and a long shifting travel, suitable for 2 cutters, with quick-change system and hydraulic counter bearing. Workpiece spindle head (C) with quick-change system (collet chuck). Heavy-duty tailstock with travel 420 mm (W), in combination with an automatic workpiece loading unit, make GÜDEL-Switzerland, with linear portal loader, approx. 1000 mm stroke (V), double gripper with jaws for loading and unloading shaft-shaped workpieces (currently approx. 60 mm long x 25 mm Ø x module 1.5), but without workpiece storage system. Separate coolant unit with magnetic chip conveyor. Comprehensive full enclosure with sliding doors. 2 machines with workpiece marking unit, make BORRIES, unfortunately no other accessories.

Kondisi: baik (bekas), Die Teile auf dem Tisch sind nicht dabei. Sie sind rot markiert. Nwsdewxdyxopfx Ab Njn

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jam operasional: 21.967 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 84.34, jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 1.150 mm, jarak gerak sumbu Z: 700 mm, lebar meja: 1.000 mm, beban meja: 1.100 kg, kecepatan spindel (maks.): 15.000 rpm, jumlah slot dalam magazin alat: 46, sudut putar sumbu A (min.): -120 °, sudut putar sumbu A (maks.): 16 °, Insolvency auction – all machines operational and ready for demonstration. Property of a German GmbH TECHNICAL DETAILS X-Axis (Longitudinal): 1,000 mm Y-Axis (Transverse): 1,150 mm Z-Axis (Vertical): 700 mm A-Axis: +16° / -120° C-Axis: n x 360° Simultaneously controlled axes: 5 axes Control unit: Heidenhain iTNC 530 Spindle speed: 15,000 rpm Tool magazine: 46 slots Feeds and traverse speeds X and Y axes: 15 / 30 m/min Z axis: 15 / 30 m/min A axis: 11 / 20 rpm C axis: 40 rpm Nwedpevxr Ilsfx Ab Nsn Worktable Clamping surface: Ø 1,000 mm Max. workpiece weight: 1,100 kg MACHINE DETAILS Machine weight: 12,300 kg Dimensions: 4,600 x 3,030 x 3,300 mm Connected load: 75 kW Operating voltage: 400 V, 50 Hz Noise protection level: 68 dB(A) Operating hours: 40,095 h Spindle hours: 21,967 h EQUIPMENT - without magnetic table

Tahun pembuatan: 2024, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Scrap grab for Terex Fuchs, Sennebogen, Liebherr Capacity: 500 l / 0.5 m³ Model: 5-tine – semi-closed Gross weight: 950 kg Nwsdpfx Aberr Sn Hs Non

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, 1 used universal milling machine Manufacturer: Mikron Model: WF 2/3 DP with Heidenhain Type 135 path control Travel (X/Y/Z): 400 / 410 / 400 mm Table clamping surface: 800 x 450 mm Spindle speed: 30 – 2240 rpm Feed rates: 1 - 750 mm/min Rapid traverse: 2000 mm/min Tool taper: ISO 40 Nedpfx Abov N Dzfj Newn Machine weight approx.: 1.4 t Space requirements approx.: 2.1 x 1.6 x 2.2 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, jarak pergerakan sumbu X: 750 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 500 mm, gerak cepat sumbu X: 1 m/menit, pergeseran cepat sumbu Y: 1 m/menit, pergerakan cepat sumbu Z: 1 m/menit, tinggi total: 2.690 mm, panjang total: 2.230 mm, lebar total: 2.360 mm, kecepatan spindel (min.): 10 rpm, kecepatan spindel (maks.): 7.500 rpm, diameter pemasangan: 200 mm, kapasitas angkut: 340 kg, Micron VCE 750 – Despite its age, the machine is in top condition and has low operating hours, as it was only used in single-shift operation. Manufacturer: Mikron Model: VCE 750 Year of manufacture: 1995 Nsdpop Sq Trefx Ab Nown Control: Mikron CNC (Haas) Travel ranges: X = 750 mm Y = 400 mm Z = 500 mm Spindle speed: 10 – 7,500 rpm Drive power: 7.5 kW spindle Tool holder: SK 40 Tool changer: 20 positions Rapid traverse: 12.7 m/min Maximum feed rate: 5.0 m/min Work table: 356 x 914 mm clamping surface Maximum table load: 340 kg Weight: 3,620 kg Dimensions (L x W x H): 2,230 x 2,360 x 2,690 mm

Kondisi: bekas, Tahun pembuatan: 1995, Horizontal travel (X-axis): 750 / 1000 mm y-travel: 600 mm z-travel: 600 mm Control: Heidenhain TNC 426 Machine weight approx. 6,500 kg Space requirement approx. 2,500 x 3,300 x 2,500 mm MIKRON VC 750/1000 – CNC Vertical Machining Center Travel distances: X-axis: approx. 750 / 1000 mm Y-axis: approx. 600 mm Z-axis: approx. 600 mm Table: Table size: approx. 1,080 x 580 mm Number of T-slots: 7 Nodpfswm Rqyex Ab Njwn T-slot spacing: 90 mm T-slot width: 14 mm Max. table load: approx. 1,000 kg Spindle: Spindle speed: 50 – 5,000 rpm Spindle taper: ISO 40 Spindle power: approx. 11 kW Tool changer: Number of tool stations: 30 – 36 Tool holder: ISO 40 Feed and rapid traverse: Rapid traverse X/Y/Z: approx. 15 m/min Control: Heidenhain TNC 426 Machine dimensions and weight: Dimensions (L x W x H): approx. 2,500 x 3,300 x 2,500 mm Weight: approx. 6,500 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 1996, NEW ARRIVAL +++++ 1 used, very well-maintained transfer machine / rotary indexing machine MIKRON MULTISTAR CX 24 Machine can be inspected under power. Part setup is not an issue. Comes with MITSUBISHI AACPU-S1 control system - year of manufacture: 1996 - Detailed technical data as per attachment - The machine can be inspected cutting/chip-on. Conversion – INSTALLATION – Setup – Application can be offered. Price ex location, unpacked, uninsured. Delivery time: immediate – subject to prior sale. Nodpfxjt I T N Eo Ab Newn Technical data is non-binding – subject to change and errors. Payment: As customary for used machines, strictly net before removal.

Kondisi: bekas, Safety switch, protective gate switch, limit switch, push button, circuit breaker, position switch, magnetic interlock switch, safety interlock Nsdpfxorcnm Ne Ab Nown - Manufacturer: Schmersal, safety interlock from CNC milling machine Mikron UME 600 - Type: AZM 161SK-33rka-024 IEC 60947-5-1 - Serial No.: see photo of nameplate - Transport dimensions: 270/260/H60 mm - Weight: 1.5 kg

Tahun pembuatan: 2023, Kondisi: baru, Scrap grab for Terex Fuchs, Sennebogen, Liebherr Nwedpfxsnziane Ab Nen Capacity: 500 l / 0.5 m³ Model: 5-tine – semi-closed Gross weight: 950 kg

Tahun pembuatan: 2023, Kondisi: baru, Multi-shell grab for excavators Terex Fuchs, Sennebogen, Liebherr Nwodpfx Abon E Scpj Njn

Tahun pembuatan: 2023, Kondisi: baru, Polyp scrap grab for Palfinger Hiab cranes Capacity: 300 l / 0.3 m³ Model: 4-tine – semi-closed Gross weight: 450 kg Nwedpfenzibljx Ab Njn