Beli Mikron Vce 800 bekas (185)

Kondisi: bekas, Tahun pembuatan: 1989, nomor mesin/kendaraan: 6766, Travel X-axis: 560 mm Travel Y-axis: 500 mm Travel Z-axis: 400 mm Table size: 900 x 530 mm Control: Heidenhain TNC 355 B/Q Tool holder: ISO 40 / M 16 Spindle speed range: 40 - 4000 rpm Kdsdpfxocxxpqj Ankeu Rapid traverse X-axis: 6 m/min Rapid traverse Y-axis: 6 m/min Rapid traverse Z-axis: 5 m/min Feed rate x/y/z - stepless: 2 - 3000 mm/min Total power requirement: 9 kW Machine weight approx.: 2.6 t Required space approx.: 2.6 x 1.8 x 2.2 m Equipped with MIKRON SMP (160 mm chuck) mounted on table, splash guard enclosure, coolant pump, work light

Kondisi: bekas, Tahun pembuatan: 1985, Wheel diameter – max. 80 mm Wheel width 150 mm Kdjdpfx Ajt Hw D Rsnkou Module – max. 2.5 Module – min. Total power requirement 10 kW Machine weight approx. 2400 kg Fully automatic hobbing machines for worm gears Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: Max. gear diameter without loading magazine approx. 80 mm Max. gear diameter with loading magazine approx. 50 mm Module max. 2 / 2.5 Axial milling length approx. 150 mm Max. workpiece installation length approx. 200 mm Milling slide swivels up to 90 degrees Cutter diameter 24 – 50/63 mm Max. radial travel of milling slide 0–14/18 mm Max. cutter shift 25 mm Cutter speeds 212 – 2,000 rpm Axial feed range, stepless 0.05 – 4.0 mm/rev Radial feed range, stepless 0.2 – 200 mm/min Milling spindle drive 3 kW Total drive approx. 10 kW – 50 Hz – 380 Volt Weight approx. 2,400 kg Accessories / Special equipment: Fully automatic workflow and minimal idle times thanks to freely programmable SIEMENS S5 PLC control for all processing steps such as rapid traverse, feed, cutter on/off, for the loading device, tailstock, optional shifting, etc., and with part counter, program numbering, and 30-stage numerical fault display. Pneumatic workpiece loading and unloading device aligned parallel to the workpiece axis for shaft-type parts approx. 140 mm long x 8 mm diameter, with pneumatic double gripper for feeding and removing workpieces; blanks are loaded externally in exchange cassettes and inserted into the loading unit. The double gripper places the parts between workpiece spindle and tailstock, the tailstock quill pushes the parts into the main spindle collet, clamping them simultaneously. Finished parts are ejected from the main spindle and returned by the gripper to the (finished parts) cassette. The entire process is electronically monitored and controlled. The entire loading device is enclosed in Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: good – 3 machines available, currently 1 machine ready for demonstration (powered), Machine is set up for hobbing worm shafts/armature shafts used in variable transmission drives for vehicle seats, window winders, etc.

Kondisi: baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 450 mm, For sale: Mikron UM 600 Machining Centre The machine is in good condition and ready for immediate use. Technical specifications: Year of manufacture: 1997 Travel X: 600 mm Travel Y: 500 mm Travel Z: 450 mm Kdjdpfx Anowx Naqeksu Clamping surface: 900 x 530 mm Max. table load: 300 kg Control: Heidenhain TNC 426 Tool holder: SK 40 Max. spindle speed: 6,300 rpm Rapid traverse X / Y / Z: 15 m/min No automatic tool changer installed; instead, the machine is equipped with a mounting arm for the conversion of the milling head (see image 4). Installation dimensions (L x W x H approx.): 2.5 x 2.2 x 2.1 m Weight approx.: 3.7 t Accessories such as tool holders and vices are not included in the offer. Transport and loading can be organised across Europe for an additional charge if requested. Prices are subject to VAT. Viewing is possible by appointment. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Machine purchasing and sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Kondisi: baik (bekas), Kontrol SPS, modul daya, modul LT, modul E/R, modul umpan balik Kodpfsrb E Hfox Ankjdu - Produsen: Siemens, Simodrive 611 LT-Modul INT. 2X15A dari mesin CNC milling Mikron UME 600 - Tipe: 6SN1123-1AB00-0AA0 - Dimensi: 290/50/H480 mm - Berat: 5,8 kg

Kondisi: baik (bekas), Kontrol SPS, modul daya, modul LT, modul Input/Output, modul umpan balik - Produsen: Siemens, Simodrive 611 LT-Modul INT. 50A dari mesin CNC milling Mikron UME 600 - Tipe: 6SN1123-1AA00-0CA0 - Dimensi: 290/50/H480 mm - Berat: 6,8 kg Ksdpforb E Hbjx Anksdu

Kondisi: bekas, Tahun pembuatan: 1998, X-axis travel 710 mm y-axis travel 630 mm z-axis travel 500 mm Table clamping surface 1100 x 585 mm Rotary table diameter 500 mm Spindle taper SK 40 Spindle speeds 5 - 6300 rpm Spindle power 11 kW Number of tool magazine positions 2 x 22 Control HEIDENHAIN, TNC 426 Total connected load 20 kW Machine weight approx. 5.8 t Accessories: various tool holders, RENISHAW OMP 60 probe, coolant system Kdodpfx Aetz Sqhenksu

Kondisi: baik (bekas), Kontrol PLC, modul tenaga, modul LT, modul E/R, modul umpan balik daya Kedpfjrb E Hqsx Anksdu - Pabrikan: Siemens, Simodrive 611 Modul LT INT. 25A dari mesin milling CNC Mikron UME 600 - Tipe: 6SN1123-1AA00-0BA2 - Dimensi: 290/50/H480 mm - Berat: 5,8 kg

Kondisi: baik (bekas), Kontrol SPS, modul daya, modul LT, modul I/O, modul umpan balik energi - Produsen: Siemens, Simodrive 611 LT-Modul INT. 2X25A - Tipe: 6SN1123-1AB00-0BA1 - Unit Kontrol: 6SN1118-1NH00-0AA1 - Jumlah: 3x modul tersedia - Harga: per unit - Dimensi: 290/50/T480 mm Kjdswcyngspfx Ankedu - Berat: 6,4 kg/unit.

Kondisi: baik (bekas), Kontrol SPS, modul daya, modul LT, modul E/R, modul umpan balik - Produsen: Siemens, Simodrive 611 LT Modul INT. 2X25A Kdedpjwcyq Ijfx Ankju - Tipe: 6SN1123-1AB00-0AA1 - Unit Kontrol: 6SN1118-1NH00-0AA1 - Jumlah: 7 modul tersedia - Harga: per unit - Dimensi: 290/50/H480 mm - Berat: 6,3 kg/unit

Kondisi: bekas, Tahun pembuatan: 1980, X-travel: 500 mm y-travel: 500 mm z-travel: 400 mm Spindle speed range: 30 – 2240 rpm Infinitely variable feed: 1 – 750 mm/min Rapid traverse: 1500 mm/min Table clamping surface: 400 x 800 mm Tool holder: SK 40 Total power requirement: 7.8 kW Machine weight approx.: 1.8 t Space requirement approx.: 2.1 x 1.6 x 2.2 m Kdjdpocxxq Defx Anksu Heidenhain TNC 131 control, tilting device for vertical head, coolant system, separate drives for each feed spindle, automatic hydraulic clamping of all axes; the working axis is automatically released, all axes can be released for manual operation.

Tahun pembuatan: 1999, Kondisi: sangat baik (bekas), Travel paths 710x500x500 mm Table size 1080x580 mm Spindle taper SK40 Spindle speeds up to 10,000 rpm Tool changer with 30 positions Kdodpfx Aod Hftxonkou Control system: HEIDENHAIN TNC-430 Internal spindle coolant supply MARCELS MASCHINEN CH

Kondisi: baik (bekas), Kontrol SPS, modul daya, modul LT, modul E/R, modul umpan balik daya - Produsen: Siemens, Simodrive 611 E/R Modul INT. 16/21KW CNC Milling Machine Mikron UME 600 - Tipe: 6SN1145-1BA00-0BA0 - Dimensi: 290/100/T480 mm - Berat: 10,6 kg Kodpferb E Hmox Anksdu

Kondisi: baik (bekas), tsf-3ur5-romarsh-10kva Kedpfxey Tv Svj Ankedu

Kondisi: bekas, PLC control, electronic modules, PLC module, plug-in card circuit board, PCB, printed circuit board -Manufacturer: Mikron, electronic module PCB from CNC milling machine Mikron UME 600 -Type: 958 78 11 200 Ksdpfx Anerc Ilgekedu -Dimensions: 145/110/H55 mm -Weight: 0.4 kg

Kondisi: baik (bekas), de-tr01 Kdjdpfxey Tv S Aj Ankeu

Kondisi: baik (bekas), Tahun pembuatan: 1998, jam operasional: 6.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 107.40.98.165, Year of manufacture: 1998 Control: Heidenhain TNC 430 Travels (X/Y/Z): 710 x 500 x 500 mm Country of Origin: Switzerland Voltage: 380V Net weight: 5,670 kg External dimensions: 2,794 x 2,997 x 3,035 mm (max.) TECHNICAL DATA Table Table size: 1,220 x 457 mm Max. table load: 1,575 kg T-slot size: 14 mm Number of T-slots: 5 Working range Longitudinal (X): 1,016 mm Transversal (Y): 508 mm Kdsdpscl Rurjfx Ankeu Vertical (Z): 635 mm Spindle Drive power AC motor, 2-speed gearbox: 11 kW Spindle speed range, stepless: 10–7,500 rpm Optional spindle speed: 10,000 rpm Tool interface: ISO 40 Feed drives AC drives X, Y, and Z axis, programmable: 0–7,620 mm/min Rapid traverse speed X, Y, Z axes: 18.0 m/min Automation Tool changer: 20 positions Tool change time (adjacent magazine slots): 5.0 sec Errors and omissions excepted. All technical data is supplied without obligation. Inventory No. 4112006, machine equipped with: - Control: Heidenhain TNC430M - Milling spindle 42,000 rpm, HSK 40 E - Tool magazine 36 positions - Electronic handwheel - Renishaw TS27 tool measurement - Ethernet card - Unilube minimum quantity lubrication - Lumestat extraction system - Full enclosure - Rotary table - Air supply through rotary table - Vacuum clamping system (supplied by external vendor) - Spray gun - Chip conveyor

Kondisi: baik (bekas), Chain-type tool changer, chain magazine, tool changing system, tool magazine Kjdpjrb E E Njfx Ankedu -Manufacturer: Mikron, tool changer from CNC machining center Mikron UME 600 -Capacity: up to 22 tool holders -Taper: SK40 -Dimensions: 1200 x 1150 x H860 mm -Transport weight: 294 kg

Kondisi: baik (bekas), Machineseeker-0001 Kjdpfjy H Itrjx Anksdu

Kondisi: bekas, Auxiliary contactor, circuit breaker, miniature circuit breaker, main disconnector, load disconnect switch, power circuit breaker, power disconnector, auxiliary switch, main switch -Manufacturer: Mikron, main disconnect switch/load disconnector from CNC milling machine Mikron UME 600 -Adapter: Heidenhain Type: 239 758 01 -Dimensions: 430/150/115 mm -Weight: 1.1 kg Kdsdpfjrc Ilnox Ankou

Kondisi: bekas, Control: Heidenhain TNC 155 Tool holder: SK 40 Quill stroke: 110 mm Table size: 1000 x 500 mm Travels: x-710, y-500, z-460 mm Spindle speed: 31.5-3150 rpm Ksdpfx Anjc Tt Hrsksdu Accessories: Angle table, coolant system, various tool holders

Kondisi: baik (bekas), de-001 Kjdperb E E Ejfx Ankodu

Tahun pembuatan: 2023, Kondisi: baru, Polyp scrap grab for Palfinger Hiab cranes Kodpfx Ansnziblskedu Capacity: 300 l / 0.3 m³ Model: 4-tine – semi-closed Gross weight: 450 kg

Kondisi: bekas, Safety switch, protective gate switch, limit switch, push button, circuit breaker, position switch, magnetic interlock switch, safety interlock - Manufacturer: Schmersal, safety interlock from CNC milling machine Mikron UME 600 - Type: AZM 161SK-33rka-024 IEC 60947-5-1 - Serial No.: see photo of nameplate - Transport dimensions: 270/260/H60 mm - Weight: 1.5 kg Kedsrcnm Nspfx Ankjdu

Kondisi: baru, Tahun pembuatan: 2025, Grapple Scrap, Grab Scrap, Multi Tine Grab untuk Skrap Kedpexryrbsfx Ankodu Kapasitas 0,6 m³ Model 5 Gigi Pelat Aus Hardox 450 Opsi Rotasi

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, nomor mesin/kendaraan: MHB5202500000156, Scrap Grab untuk Terex Fuchs, Sennebogen, Liebherr Model 5 gigi Kedpfxoxryn Ao Anksdu Kapasitas 500 liter