Beli Mikron Wf 21 D bekas (179)

Kondisi: bekas, Tahun pembuatan: 1985, Wheel diameter – max. 80 mm Wheel width 150 mm Module – max. 2.5 Module – min. Total power requirement 10 kW Machine weight approx. 2400 kg Fully automatic hobbing machines for worm gears Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: Max. gear diameter without loading magazine approx. 80 mm Max. gear diameter with loading magazine approx. 50 mm Module max. 2 / 2.5 Axial milling length approx. 150 mm Max. workpiece installation length approx. 200 mm Njdpfx Aet Hw D Reb Nown Milling slide swivels up to 90 degrees Cutter diameter 24 – 50/63 mm Max. radial travel of milling slide 0–14/18 mm Max. cutter shift 25 mm Cutter speeds 212 – 2,000 rpm Axial feed range, stepless 0.05 – 4.0 mm/rev Radial feed range, stepless 0.2 – 200 mm/min Milling spindle drive 3 kW Total drive approx. 10 kW – 50 Hz – 380 Volt Weight approx. 2,400 kg Accessories / Special equipment: Fully automatic workflow and minimal idle times thanks to freely programmable SIEMENS S5 PLC control for all processing steps such as rapid traverse, feed, cutter on/off, for the loading device, tailstock, optional shifting, etc., and with part counter, program numbering, and 30-stage numerical fault display. Pneumatic workpiece loading and unloading device aligned parallel to the workpiece axis for shaft-type parts approx. 140 mm long x 8 mm diameter, with pneumatic double gripper for feeding and removing workpieces; blanks are loaded externally in exchange cassettes and inserted into the loading unit. The double gripper places the parts between workpiece spindle and tailstock, the tailstock quill pushes the parts into the main spindle collet, clamping them simultaneously. Finished parts are ejected from the main spindle and returned by the gripper to the (finished parts) cassette. The entire process is electronically monitored and controlled. The entire loading device is enclosed in Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: good – 3 machines available, currently 1 machine ready for demonstration (powered), Machine is set up for hobbing worm shafts/armature shafts used in variable transmission drives for vehicle seats, window winders, etc.

Kondisi: baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 450 mm, For sale: Mikron UM 600 Machining Centre The machine is in good condition and ready for immediate use. Technical specifications: Year of manufacture: 1997 Travel X: 600 mm Travel Y: 500 mm Travel Z: 450 mm Clamping surface: 900 x 530 mm Max. table load: 300 kg Control: Heidenhain TNC 426 Tool holder: SK 40 Max. spindle speed: 6,300 rpm Rapid traverse X / Y / Z: 15 m/min No automatic tool changer installed; instead, the machine is equipped with a mounting arm for the conversion of the milling head (see image 4). Installation dimensions (L x W x H approx.): 2.5 x 2.2 x 2.1 m Weight approx.: 3.7 t Accessories such as tool holders and vices are not included in the offer. Nsdpfx Abswx Naqe Njwn Transport and loading can be organised across Europe for an additional charge if requested. Prices are subject to VAT. Viewing is possible by appointment. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Machine purchasing and sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Kondisi: baik (bekas), Tahun pembuatan: 1999, Die Maschine ist in gutem Zustand. X 750 mm Y 400 mm Nwodpfowx Rafjx Ab Nen Z 500 mm 10.000 U/min

Tahun pembuatan: 1995, Kondisi: siap digunakan (bekas), Travel X/Y/Z: 560mm/500mm/400mm, spindle speed: 5000 rpm, table dimensions X/Y: 900mm/530mm, feed rate: 8 m/min, rapid traverse: 10 m/min, tool stations: 22, tool holder: SK40. Machine dimensions X/Y/Z: approx. 3950mm/2650mm/2150mm, weight: approx. 3000kg, control: Heidenhain TNC 407/415, operating hours: 29,647h. The central lubrication system has issues. Documentation is available. On-site inspection is possible. Nodpew H At Hjfx Ab Newn

Kondisi: baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, Mesin dalam kondisi baik, suku cadang yang ditunjukkan secara manual tidak termasuk dalam paket. X 1025 mm Ljbijwx N Nfsa A Hkmsad Y 560 mm Z 600 mm Heidenhain TNC 620, 16.000 rpm, HSK 63 Nsdpfx Asw Dbt Tsb Nswn

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 29.655 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 73.110, jarak pergerakan sumbu X: 1.350 mm, jarak lintasan sumbu Y: 1.150 mm, jarak gerak sumbu Z: 700 mm, lebar meja: 1.100 mm, beban meja: 1.600 kg, kecepatan spindel (maks.): 12.000 rpm, jumlah slot dalam magazin alat: 92, sudut putar sumbu A (min.): -120 °, sudut putar sumbu A (maks.): 16 °, Insolvency auction – all machines fully functional and ready for demonstration. Property of a German GmbH TECHNICAL DETAILS X-axis (Longitudinal): 1,350 mm Y-axis (Transverse): 1,150 mm Z-axis (Vertical): 700 mm A-axis: +16° / -120° C-axis: n x 360° Simultaneously controlled axes: 5 axes Control system: Heidenhain iTNC 530 Spindle speed: 12,000 rpm Tool magazine: 92 slots Feeds and rapid traverse rates X and Y axes: 15 / 30 m/min Z axis: 15 / 30 m/min A axis: 11 / 20 rpm C axis: 40 rpm Worktable Clamping surface: Ø 1,100 mm Max. workpiece weight: 1,600 kg MACHINE DETAILS Machine weight: 12,600 kg Dimensions: 4,650 x 3,030 x 3,300 mm Connected load: 75 kW Operating voltage: 400 V, 50 Hz Noise protection level: 68 dB(A) Nwsdpevxr I Esfx Ab Nen Program run time: 34,205 h Spindle hours: 29,655 h EQUIPMENT - Without magnetic table

Kondisi: bekas, Tahun pembuatan: 1992, Wheel diameter – max. 150 mm Wheel width: 300 mm Module – max.: 4.5 Module – min.: [not specified] Total power requirement: 20 kW Machine weight: approx. 6 t Floor space required: [not specified] CNC-controlled horizontal gear hobbing machine with workpiece portal loading system, Type A 35 / 36 CNC, year of manufacture 1992 Workpiece diameter / wheel diameter for automatic loading, max.: 150 mm Workpiece diameter for manual loading, max.: 200 mm Maximum workpiece length: approx. 400 mm Axial hobbing length (Z-axis): 300 mm Module range HSS/Carbide cutters: 3 / 4.5 mm Number of teeth, min./max.: 2-999 Distance between tool and workpiece, min./max.: 0 - 190 mm Maximum workpiece spindle speed: 0-350 rpm Swivel range of milling slide left/right: 50° / 60° Cutter size (diameter x length): 102 x 230 mm Cutter displacement max. (Y-axis): 100 mm Radial slide travel max. (X-axis): 10-150 mm Tailstock travel max. (W-axis): 420 mm Nedpfx Abst Hwxbj Nswn Cutter speeds stepless: 0 - 1,500 rpm Feed rates all axes steplessly adjustable: 3.5 or 4 m/min Spindle drive approx.: 8.8 kW Total drive approx.: 20 kW - 220 V/400 V / 50 Hz Weight approx.: 6,000 kg Accessories / Special equipment: MIKRON CNC control type 788 (BWO) with monitor for up to 8 axes (ABC and WYZ and WV) with conversational programming for the creation of various gearing cycles, such as helical gearing, worm and worm gear cutting, crowned gearing, with and without shifting, as well as further sub-programs. Heavy-duty shifting milling head with high cutter speeds and a long shifting travel, suitable for 2 cutters, with quick-change system and hydraulic counter bearing. Workpiece spindle head (C) with quick-change system (collet chuck). Heavy-duty tailstock with travel 420 mm (W), in combination with an automatic workpiece loading unit, make GÜDEL-Switzerland, with linear portal loader, approx. 1000 mm stroke (V), double gripper with jaws for loading and unloading shaft-shaped workpieces (currently approx. 60 mm long x 25 mm Ø x module 1.5), but without workpiece storage system. Separate coolant unit with magnetic chip conveyor. Comprehensive full enclosure with sliding doors. 2 machines with workpiece marking unit, make BORRIES, unfortunately no other accessories.

Kondisi: bekas, Tahun pembuatan: 2000, x-travel 1000 mm y-travel 1040 mm z-travel 750 mm Control Heidenhain TNC 426 Spindle speed 15,000 rpm Total power requirement 40 kW Machine weight approx. 10.1 t Space requirement approx. / m Incl. handwheel and documentation Nodstig D Ispfx Ab Newn

Kondisi: baik (bekas), Tahun pembuatan: 2015, Die Maschine ist in gutem Zustand, die per Hand gezeigten Teile sind nicht im Lieferumfang enthalten. Nodpfxowx N Nfs Ab Nswn X 1025 mm Y 560 mm Z 600 mm Heidenhain TNC 620, 16.000 U/min, HSK 63

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1995, Travel X/Y/Z: 710mm/630mm/500mm, Table dimensions X/Y: 1200mm/600mm, Max. table load: 500kg, Tool stations: 22, Tool holder: SK40, Spindle speed: 6300rpm, Feed rate: 10m/min, Rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 2400mm/3400mm/2300mm, Weight: approx. 4600kg, Control: Heidenhain TNC 426. Includes internal coolant supply (IKZ) and external cooling. Documentation available. On-site inspection possible. Nodpfx Abew Exr Ao Newn

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, jam operasional: 105.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 107.32.99.023, jarak pergerakan sumbu X: 530 mm, jarak lintasan sumbu Y: 450 mm, jarak gerak sumbu Z: 450 mm, kecepatan pemakanan sumbu X: 22 m/menit, laju pemakanan sumbu Z: 22 m/menit, kecepatan spindel (min.): 22.000 rpm, diameter pemasangan: 63 mm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Please let us know your offer price. Sales only within Europe, including Turkey. Price without packaging; Delivery condition: FCA (machine location) ===== For technical data, please refer to the attached handout. Nwsdpfxow A Au Nj Ab Non All warranty and guarantee rights are excluded. We do not guarantee the accuracy of the technical data and year of manufacture, completeness of accessories and tooling, or compliance with all safety and environmental protection requirements stipulated by accident prevention regulations. No sale to private individuals.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jam operasional: 21.967 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 84.34, jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 1.150 mm, jarak gerak sumbu Z: 700 mm, lebar meja: 1.000 mm, beban meja: 1.100 kg, kecepatan spindel (maks.): 15.000 rpm, jumlah slot dalam magazin alat: 46, sudut putar sumbu A (min.): -120 °, sudut putar sumbu A (maks.): 16 °, Insolvency auction – all machines operational and ready for demonstration. Property of a German GmbH TECHNICAL DETAILS X-Axis (Longitudinal): 1,000 mm Y-Axis (Transverse): 1,150 mm Z-Axis (Vertical): 700 mm A-Axis: +16° / -120° C-Axis: n x 360° Simultaneously controlled axes: 5 axes Control unit: Heidenhain iTNC 530 Spindle speed: 15,000 rpm Tool magazine: 46 slots Nwedpevxr Ilefx Ab Nen Feeds and traverse speeds X and Y axes: 15 / 30 m/min Z axis: 15 / 30 m/min A axis: 11 / 20 rpm C axis: 40 rpm Worktable Clamping surface: Ø 1,000 mm Max. workpiece weight: 1,100 kg MACHINE DETAILS Machine weight: 12,300 kg Dimensions: 4,600 x 3,030 x 3,300 mm Connected load: 75 kW Operating voltage: 400 V, 50 Hz Noise protection level: 68 dB(A) Operating hours: 40,095 h Spindle hours: 21,967 h EQUIPMENT - without magnetic table

Tahun pembuatan: 2024, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Scrap grab for Terex Fuchs, Sennebogen, Liebherr Capacity: 500 l / 0.5 m³ Nwodpfxjrr Sn Ho Ab Non Model: 5-tine – semi-closed Gross weight: 950 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, Steuerungseinheit Marke: HEIDENHAIN Modell: TNC 410/426 Nwodpswqh Tmefx Ab Njn Werkzeuge Maximales Werkzeuggewicht: 12 kg Maximaler Werkzeugdurchmesser: 200 mm Werkzeugaufnahme: SK 40 / DIN 69871 Zusätzliche Ausstattung Lärmemission: Schallleistungspegel 75 dB(A) Dieses 3-Achs-MIKRON UM 600 Vertikal-Bearbeitungszentrum wurde 1997 hergestellt. Wenn Sie eine hochwertige Fräskapazität suchen, ist die MIKRON UM 600 eine überzeugende Wahl. Kontaktieren Sie uns gerne für weitere Informationen. Anwendungsbereiche Fräsen

Kondisi: baik (bekas), Die Teile auf dem Tisch sind nicht dabei. Sie sind rot markiert. Nwjdpfx Aswxdyxsb Non

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1994, Stations: 24, Substations: 20, Side stations: 20, Axes: 2 per station, Collets: 24, Production capacity single/double cycle: 120/240 pcs/min, Stroke: 35mm, Max. workpiece diameter: 25mm, Spindle speed: 20,000 rpm, Machine weight: approx. 2,650 kg, Control: Mikron MAC 50, Operating hours: approx. 17,335 h. Documentation available. On-site inspection possible. Nwodpow Emx Rofx Ab Non

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, jarak pergerakan sumbu X: 750 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 500 mm, gerak cepat sumbu X: 1 m/menit, pergeseran cepat sumbu Y: 1 m/menit, pergerakan cepat sumbu Z: 1 m/menit, tinggi total: 2.690 mm, panjang total: 2.230 mm, lebar total: 2.360 mm, kecepatan spindel (min.): 10 rpm, kecepatan spindel (maks.): 7.500 rpm, diameter pemasangan: 200 mm, kapasitas angkut: 340 kg, Micron VCE 750 – Despite its age, the machine is in top condition and has low operating hours, as it was only used in single-shift operation. Manufacturer: Mikron Model: VCE 750 Year of manufacture: 1995 Control: Mikron CNC (Haas) Travel ranges: X = 750 mm Y = 400 mm Z = 500 mm Spindle speed: 10 – 7,500 rpm Drive power: 7.5 kW spindle Tool holder: SK 40 Tool changer: 20 positions Rapid traverse: 12.7 m/min Maximum feed rate: 5.0 m/min Work table: 356 x 914 mm clamping surface Maximum table load: 340 kg Weight: 3,620 kg Njdpfx Abjp Sq Trs Nswn Dimensions (L x W x H): 2,230 x 2,360 x 2,690 mm

Kondisi: bekas, Tahun pembuatan: 1995, Horizontal travel (X-axis): 750 / 1000 mm y-travel: 600 mm Nwsdpfx Ajwm Rqysb Nen z-travel: 600 mm Control: Heidenhain TNC 426 Machine weight approx. 6,500 kg Space requirement approx. 2,500 x 3,300 x 2,500 mm MIKRON VC 750/1000 – CNC Vertical Machining Center Travel distances: X-axis: approx. 750 / 1000 mm Y-axis: approx. 600 mm Z-axis: approx. 600 mm Table: Table size: approx. 1,080 x 580 mm Number of T-slots: 7 T-slot spacing: 90 mm T-slot width: 14 mm Max. table load: approx. 1,000 kg Spindle: Spindle speed: 50 – 5,000 rpm Spindle taper: ISO 40 Spindle power: approx. 11 kW Tool changer: Number of tool stations: 30 – 36 Tool holder: ISO 40 Feed and rapid traverse: Rapid traverse X/Y/Z: approx. 15 m/min Control: Heidenhain TNC 426 Machine dimensions and weight: Dimensions (L x W x H): approx. 2,500 x 3,300 x 2,500 mm Weight: approx. 6,500 kg

Tahun pembuatan: 2023, Kondisi: baru, Scrap grab for Terex Fuchs, Sennebogen, Liebherr Capacity: 500 l / 0.5 m³ Model: 5-tine – semi-closed Gross weight: 950 kg Nwsdpfxjnzianj Ab Nsn

Kondisi: sangat baik (bekas), Tahun pembuatan: 1996, NEW ARRIVAL +++++ 1 used, very well-maintained transfer machine / rotary indexing machine MIKRON MULTISTAR CX 24 Nwjdpfx Ajt I T N Ejb Nsn Machine can be inspected under power. Part setup is not an issue. Comes with MITSUBISHI AACPU-S1 control system - year of manufacture: 1996 - Detailed technical data as per attachment - The machine can be inspected cutting/chip-on. Conversion – INSTALLATION – Setup – Application can be offered. Price ex location, unpacked, uninsured. Delivery time: immediate – subject to prior sale. Technical data is non-binding – subject to change and errors. Payment: As customary for used machines, strictly net before removal.

Kondisi: baik (bekas), Tahun pembuatan: 2007, Die Maschine ist in gutem Zustand, Die per Hand gezeigten Teile sind nicht im Lieferumfang enthalten. Nwjdewk Nm Ijpfx Ab Non SK 40, 24 Werkzeugplätze im Werkzeugwechsler. 10.000 U/min

Kondisi: hampir baru (bekas), Tahun pembuatan: 2001, x-travel 600 mm y-travel 450 mm z-travel 450 mm Machine weight approx. 6,500 kg Required space approx. 3,900 x 3,500 x 2,700 mm MIKRON VCP 600 – CNC Vertical Machining Centre (Year of manufacture: 2001) The MIKRON VCP 600 is a precise 3-axis CNC vertical machining centre, ideally suited for high-precision machining of complex workpieces. With its robust construction, powerful spindle and reliable Heidenhain control, it meets the highest standards for both single-part and series production. All details are provided without guarantee. Exact technical data available upon purchase. Control: TNC 426/430 Axis Travel X-axis: 600 mm Nwodpfx Abjwmzgfj Nsn Y-axis: 450 mm Z-axis: 450 mm Table Table size: 850 x 530 mm Maximum table load: 400 kg Number of T-slots: 6 T-slot spacing: 63 mm T-slot width: 14H12 mm Spindle Spindle speed: 100 – 20,000 rpm Spindle power: 12 / 16 kW Tool taper: HSK-A63 Tool Changer Number of tool stations: 30 Max. tool diameter: 90 mm Max. tool diameter with empty adjacent pockets: 110 mm Max. tool length: 250 mm Max. tool weight: 6 kg Chip-to-chip time: approx. 7 seconds Feed and Rapid Traverse Feed rate: 0 – 22,000 mm/min Rapid traverse: 22 m/min Feed force (X/Y/Z): 5,000 N Dimensions and Weight Machine weight: approx. 6,500 kg Floor space required (L x W x H): approx. 3,900 x 3,500 x 2,700 mm

Tahun pembuatan: 2023, Kondisi: baru, Multi-shell grab for excavators Terex Fuchs, Sennebogen, Liebherr Njdpsn E Scpefx Ab Nown

Kondisi: baik (bekas), Tahun pembuatan: 2007, Technische Daten der auf den Fotos gezeigten Maschine. Nedpfxeu Av Ubo Ab Njwn Teile, die per Hand gezeigt werden, gehören nicht zum Lieferumfang. Neue Spindel 05/2019.

Tahun pembuatan: 2023, Kondisi: baru, Polyp scrap grab for Palfinger Hiab cranes Capacity: 300 l / 0.3 m³ Nwodpfonziblsx Ab Nen Model: 4-tine – semi-closed Gross weight: 450 kg