Beli Mikron Wf bekas (193)

Kondisi: bekas, Tahun pembuatan: 1985, Wheel diameter – max. 80 mm Wheel width 150 mm Module – max. 2.5 Module – min. Total power requirement 10 kW Machine weight approx. 2400 kg Fully automatic hobbing machines for worm gears Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: Max. gear diameter without loading magazine approx. 80 mm Max. gear diameter with loading magazine approx. 50 mm Module max. 2 / 2.5 Axial milling length approx. 150 mm Max. workpiece installation length approx. 200 mm Milling slide swivels up to 90 degrees Cutter diameter 24 – 50/63 mm Max. radial travel of milling slide 0–14/18 mm Max. cutter shift 25 mm Cutter speeds 212 – 2,000 rpm Hfedpfxjt Hw D Rs Adqsn Axial feed range, stepless 0.05 – 4.0 mm/rev Radial feed range, stepless 0.2 – 200 mm/min Milling spindle drive 3 kW Total drive approx. 10 kW – 50 Hz – 380 Volt Weight approx. 2,400 kg Accessories / Special equipment: Fully automatic workflow and minimal idle times thanks to freely programmable SIEMENS S5 PLC control for all processing steps such as rapid traverse, feed, cutter on/off, for the loading device, tailstock, optional shifting, etc., and with part counter, program numbering, and 30-stage numerical fault display. Pneumatic workpiece loading and unloading device aligned parallel to the workpiece axis for shaft-type parts approx. 140 mm long x 8 mm diameter, with pneumatic double gripper for feeding and removing workpieces; blanks are loaded externally in exchange cassettes and inserted into the loading unit. The double gripper places the parts between workpiece spindle and tailstock, the tailstock quill pushes the parts into the main spindle collet, clamping them simultaneously. Finished parts are ejected from the main spindle and returned by the gripper to the (finished parts) cassette. The entire process is electronically monitored and controlled. The entire loading device is enclosed in Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: good – 3 machines available, currently 1 machine ready for demonstration (powered), Machine is set up for hobbing worm shafts/armature shafts used in variable transmission drives for vehicle seats, window winders, etc.

Kondisi: baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 450 mm, For sale: Mikron UM 600 Machining Centre The machine is in good condition and ready for immediate use. Technical specifications: Year of manufacture: 1997 Travel X: 600 mm Travel Y: 500 mm Travel Z: 450 mm Clamping surface: 900 x 530 mm Max. table load: 300 kg Control: Heidenhain TNC 426 Tool holder: SK 40 Max. spindle speed: 6,300 rpm Rapid traverse X / Y / Z: 15 m/min No automatic tool changer installed; instead, the machine is equipped with a mounting arm for the conversion of the milling head (see image 4). Installation dimensions (L x W x H approx.): 2.5 x 2.2 x 2.1 m Weight approx.: 3.7 t Accessories such as tool holders and vices are not included in the offer. Transport and loading can be organised across Europe for an additional charge if requested. Prices are subject to VAT. Viewing is possible by appointment. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Machine purchasing and sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? Hfsdpfxjwx Naqe Adqsn For further information or contact options, please visit our website.

Kondisi: bekas, Tahun pembuatan: 2007, jam operasional: 30.614 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.600 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 900 mm, lebar meja: 1.700 mm, panjang meja: 850 mm, kecepatan spindel (min.): 10.000 rpm, Sumbu pergerakan 1600 x 900 x 800 mm Ukuran meja 1700 x 850 mm Pemasangan spindle SK40 Kecepatan spindle - 10.000 rpm Pengganti alat 30 posisi Kontrol: HEIDENHAIN iTNC530 Catatan: - Harga TIDAK termasuk aksesori apapun! - Pengambilan oleh pembeli, dari lokasi. - Waktu pengambilan akan disepakati dengan penjual. Hjdpjwcn E Hsfx Adqsfn - Tanpa garansi - Pembayaran di muka (faktur) atau tunai saat pengambilan

Tahun pembuatan: 1995, Kondisi: siap digunakan (bekas), Travel X/Y/Z: 560mm/500mm/400mm, spindle speed: 5000 rpm, table dimensions X/Y: 900mm/530mm, feed rate: 8 m/min, rapid traverse: 10 m/min, tool stations: 22, tool holder: SK40. Machine dimensions X/Y/Z: approx. 3950mm/2650mm/2150mm, weight: approx. 3000kg, control: Heidenhain TNC 407/415, operating hours: 29,647h. The central lubrication system has issues. Documentation is available. On-site inspection is possible. Hfodpfow H At Hex Adqjn

Kondisi: baik (bekas), Tahun pembuatan: 1999, Die Maschine ist in gutem Zustand. X 750 mm Hfjdpfxowx Rafj Adqsn Y 400 mm Z 500 mm 10.000 U/min

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 530 mm, jarak lintasan sumbu Y: 450 mm, jarak gerak sumbu Z: 450 mm, kecepatan spindel (maks.): 12.000 rpm, jam operasional spindle: 2.450 h, Perlengkapan: dokumentasi / manual, konveyor serpihan, 1 Hfjdpfxjwdw Efj Adqsn

Kondisi: bekas, Tahun pembuatan: 1992, Wheel diameter – max. 150 mm Wheel width: 300 mm Module – max.: 4.5 Module – min.: [not specified] Total power requirement: 20 kW Machine weight: approx. 6 t Floor space required: [not specified] CNC-controlled horizontal gear hobbing machine with workpiece portal loading system, Type A 35 / 36 CNC, year of manufacture 1992 Workpiece diameter / wheel diameter for automatic loading, max.: 150 mm Workpiece diameter for manual loading, max.: 200 mm Maximum workpiece length: approx. 400 mm Axial hobbing length (Z-axis): 300 mm Module range HSS/Carbide cutters: 3 / 4.5 mm Number of teeth, min./max.: 2-999 Distance between tool and workpiece, min./max.: 0 - 190 mm Maximum workpiece spindle speed: 0-350 rpm Swivel range of milling slide left/right: 50° / 60° Cutter size (diameter x length): 102 x 230 mm Cutter displacement max. (Y-axis): 100 mm Radial slide travel max. (X-axis): 10-150 mm Tailstock travel max. (W-axis): 420 mm Cutter speeds stepless: 0 - 1,500 rpm Hfsdet Hwxbepfx Adqjn Feed rates all axes steplessly adjustable: 3.5 or 4 m/min Spindle drive approx.: 8.8 kW Total drive approx.: 20 kW - 220 V/400 V / 50 Hz Weight approx.: 6,000 kg Accessories / Special equipment: MIKRON CNC control type 788 (BWO) with monitor for up to 8 axes (ABC and WYZ and WV) with conversational programming for the creation of various gearing cycles, such as helical gearing, worm and worm gear cutting, crowned gearing, with and without shifting, as well as further sub-programs. Heavy-duty shifting milling head with high cutter speeds and a long shifting travel, suitable for 2 cutters, with quick-change system and hydraulic counter bearing. Workpiece spindle head (C) with quick-change system (collet chuck). Heavy-duty tailstock with travel 420 mm (W), in combination with an automatic workpiece loading unit, make GÜDEL-Switzerland, with linear portal loader, approx. 1000 mm stroke (V), double gripper with jaws for loading and unloading shaft-shaped workpieces (currently approx. 60 mm long x 25 mm Ø x module 1.5), but without workpiece storage system. Separate coolant unit with magnetic chip conveyor. Comprehensive full enclosure with sliding doors. 2 machines with workpiece marking unit, make BORRIES, unfortunately no other accessories.

Kondisi: baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, Mesin dalam kondisi baik, suku cadang yang ditunjukkan secara manual tidak termasuk dalam paket. X 1025 mm Ljbijwx N Nfsa A Hkmsad Y 560 mm Z 600 mm Heidenhain TNC 620, 16.000 rpm, HSK 63 Hfjdpfx Adew Dbt Tjqen

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, jam operasional: 105.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 107.32.99.023, jarak pergerakan sumbu X: 530 mm, jarak lintasan sumbu Y: 450 mm, jarak gerak sumbu Z: 450 mm, kecepatan pemakanan sumbu X: 22 m/menit, laju pemakanan sumbu Z: 22 m/menit, kecepatan spindel (min.): 22.000 rpm, diameter pemasangan: 63 mm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Please let us know your offer price. Hfjdsw A Au Nspfx Adqon Sales only within Europe, including Turkey. Price without packaging; Delivery condition: FCA (machine location) ===== For technical data, please refer to the attached handout. All warranty and guarantee rights are excluded. We do not guarantee the accuracy of the technical data and year of manufacture, completeness of accessories and tooling, or compliance with all safety and environmental protection requirements stipulated by accident prevention regulations. No sale to private individuals.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1995, Travel X/Y/Z: 710mm/630mm/500mm, Table dimensions X/Y: 1200mm/600mm, Max. table load: 500kg, Tool stations: 22, Tool holder: SK40, Spindle speed: 6300rpm, Feed rate: 10m/min, Rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 2400mm/3400mm/2300mm, Weight: approx. 4600kg, Control: Heidenhain TNC 426. Includes internal coolant supply (IKZ) and external cooling. Documentation available. On-site inspection possible. Hodpfx Adow Exr Aeqjfn

Kondisi: baik (bekas), Tahun pembuatan: 2015, Die Maschine ist in gutem Zustand, die per Hand gezeigten Teile sind nicht im Lieferumfang enthalten. X 1025 mm Y 560 mm Z 600 mm Heidenhain TNC 620, 16.000 U/min, HSK 63 Hfjdpewx N Nfsfx Adqsn

Kondisi: bekas, Tahun pembuatan: 2000, x-travel 1000 mm y-travel 1040 mm z-travel 750 mm Control Heidenhain TNC 426 Spindle speed 15,000 rpm Total power requirement 40 kW Machine weight approx. 10.1 t Space requirement approx. / m Incl. handwheel and documentation Hsdjtig D Iepfx Adqefn

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, Steuerungseinheit Marke: HEIDENHAIN Hfjdjwqh Tmepfx Adqsn Modell: TNC 410/426 Werkzeuge Maximales Werkzeuggewicht: 12 kg Maximaler Werkzeugdurchmesser: 200 mm Werkzeugaufnahme: SK 40 / DIN 69871 Zusätzliche Ausstattung Lärmemission: Schallleistungspegel 75 dB(A) Dieses 3-Achs-MIKRON UM 600 Vertikal-Bearbeitungszentrum wurde 1997 hergestellt. Wenn Sie eine hochwertige Fräskapazität suchen, ist die MIKRON UM 600 eine überzeugende Wahl. Kontaktieren Sie uns gerne für weitere Informationen. Anwendungsbereiche Fräsen

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, jarak pergerakan sumbu X: 750 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 500 mm, gerak cepat sumbu X: 1 m/menit, pergeseran cepat sumbu Y: 1 m/menit, pergerakan cepat sumbu Z: 1 m/menit, tinggi total: 2.690 mm, panjang total: 2.230 mm, lebar total: 2.360 mm, kecepatan spindel (min.): 10 rpm, kecepatan spindel (maks.): 7.500 rpm, diameter pemasangan: 200 mm, kapasitas angkut: 340 kg, Micron VCE 750 – Despite its age, the machine is in top condition and has low operating hours, as it was only used in single-shift operation. Manufacturer: Mikron Model: VCE 750 Year of manufacture: 1995 Control: Mikron CNC (Haas) Hfodpfx Asp Sq Tredqon Travel ranges: X = 750 mm Y = 400 mm Z = 500 mm Spindle speed: 10 – 7,500 rpm Drive power: 7.5 kW spindle Tool holder: SK 40 Tool changer: 20 positions Rapid traverse: 12.7 m/min Maximum feed rate: 5.0 m/min Work table: 356 x 914 mm clamping surface Maximum table load: 340 kg Weight: 3,620 kg Dimensions (L x W x H): 2,230 x 2,360 x 2,690 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 29.655 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 73.110, jarak pergerakan sumbu X: 1.350 mm, jarak lintasan sumbu Y: 1.150 mm, jarak gerak sumbu Z: 700 mm, lebar meja: 1.100 mm, beban meja: 1.600 kg, kecepatan spindel (maks.): 12.000 rpm, jumlah slot dalam magazin alat: 92, sudut putar sumbu A (min.): -120 °, sudut putar sumbu A (maks.): 16 °, Insolvency auction – all machines fully functional and ready for demonstration. Property of a German GmbH TECHNICAL DETAILS X-axis (Longitudinal): 1,350 mm Y-axis (Transverse): 1,150 mm Z-axis (Vertical): 700 mm A-axis: +16° / -120° C-axis: n x 360° Simultaneously controlled axes: 5 axes Control system: Heidenhain iTNC 530 Spindle speed: 12,000 rpm Tool magazine: 92 slots Feeds and rapid traverse rates X and Y axes: 15 / 30 m/min Z axis: 15 / 30 m/min Hodpsvxr I Esfx Adqsfn A axis: 11 / 20 rpm C axis: 40 rpm Worktable Clamping surface: Ø 1,100 mm Max. workpiece weight: 1,600 kg MACHINE DETAILS Machine weight: 12,600 kg Dimensions: 4,650 x 3,030 x 3,300 mm Connected load: 75 kW Operating voltage: 400 V, 50 Hz Noise protection level: 68 dB(A) Program run time: 34,205 h Spindle hours: 29,655 h EQUIPMENT - Without magnetic table

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1994, Stations: 24, Substations: 20, Side stations: 20, Axes: 2 per station, Collets: 24, Production capacity single/double cycle: 120/240 pcs/min, Stroke: 35mm, Max. workpiece diameter: 25mm, Spindle speed: 20,000 rpm, Machine weight: approx. 2,650 kg, Control: Mikron MAC 50, Operating hours: approx. 17,335 h. Documentation available. On-site inspection possible. Hfsdew Emx Rspfx Adqen

Kondisi: baik (bekas), Die Teile auf dem Tisch sind nicht dabei. Sie sind rot markiert. Hedjwxdyxepfx Adqofn

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 110 mm, jarak lintasan sumbu Y: 150 mm, jarak gerak sumbu Z: 150 mm, panjang benda kerja (maks.): 40 mm, lebar benda kerja (maks.): 80 mm, The rotary indexing machine is comprehensively equipped; the machine’s original price is approximately €3,000,000. No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distance X-axis: 110 mm Travel distance Y-axis: 150 mm Travel distance Z-axis: 150 mm Work spindles Max. speed: 20,000 rpm Max. torque: 50 Nm Workpiece Hfjdpewy I Tlefx Adqon Maximum workpiece dimensions: Ø 40 x 80 mm Number of workpiece spindles: Max. 24 Number of tools on machine: Max. 63 Lubrication pressure at tool center (bar): 80/110 Number of stations: 16 Repeat accuracy of table positioning: Ø 20 x 60 mm MACHINE DETAILS Electrical Data Voltage, phase frequency: 400 V / 50 Hz Weight & Transport Dimensions Weight: 19,000 kg Transport dimensions: 400 x 300 x 340 cm EQUIPMENT Chip conveyor Rack for oil tube, extraction system, and tube Loading systems Vibrators Cabinets / side elements / upper channel / cabinet upper parts Platform Polycarbonate partitions Fire protection system with control console Further information regarding transport dimensions can be found in the attached packing list.

Kondisi: baik (bekas), Tahun pembuatan: 2016, XYZ traverses: 800 x 800 x 550 mm, Table: 500 x 500 mm, A axis: -91 / +121 degrees, C axis: 360 degrees continuous, Heidenhain TNC 530 control, Spindle speed: 20,000 rpm, Spindle motor: 36 kW, Spindle taper: HSK A63, Tool magazine: 60 stations, Swarf conveyor. Hfsdpjwq A Rgjfx Adqen

Tahun pembuatan: 2024, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Scrap grab for Terex Fuchs, Sennebogen, Liebherr Capacity: 500 l / 0.5 m³ Model: 5-tine – semi-closed Hfodpfx Ajrr Sn Hjdqon Gross weight: 950 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jam operasional: 21.967 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 84.34, jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 1.150 mm, jarak gerak sumbu Z: 700 mm, lebar meja: 1.000 mm, beban meja: 1.100 kg, kecepatan spindel (maks.): 15.000 rpm, jumlah slot dalam magazin alat: 46, sudut putar sumbu A (min.): -120 °, sudut putar sumbu A (maks.): 16 °, Insolvency auction – all machines operational and ready for demonstration. Property of a German GmbH TECHNICAL DETAILS Hfodpfx Adovxr Ilsqsn X-Axis (Longitudinal): 1,000 mm Y-Axis (Transverse): 1,150 mm Z-Axis (Vertical): 700 mm A-Axis: +16° / -120° C-Axis: n x 360° Simultaneously controlled axes: 5 axes Control unit: Heidenhain iTNC 530 Spindle speed: 15,000 rpm Tool magazine: 46 slots Feeds and traverse speeds X and Y axes: 15 / 30 m/min Z axis: 15 / 30 m/min A axis: 11 / 20 rpm C axis: 40 rpm Worktable Clamping surface: Ø 1,000 mm Max. workpiece weight: 1,100 kg MACHINE DETAILS Machine weight: 12,300 kg Dimensions: 4,600 x 3,030 x 3,300 mm Connected load: 75 kW Operating voltage: 400 V, 50 Hz Noise protection level: 68 dB(A) Operating hours: 40,095 h Spindle hours: 21,967 h EQUIPMENT - without magnetic table

Kondisi: baik (bekas), Tahun pembuatan: 2007, Die Maschine ist in gutem Zustand, Die per Hand gezeigten Teile sind nicht im Lieferumfang enthalten. SK 40, 24 Werkzeugplätze im Werkzeugwechsler. Hsdpjwk Nm Isfx Adqefn 10.000 U/min

Tahun pembuatan: 2023, Kondisi: baru, Scrap grab for Terex Fuchs, Sennebogen, Liebherr Capacity: 500 l / 0.5 m³ Model: 5-tine – semi-closed Hodpfxonzians Adqsfn Gross weight: 950 kg

Tahun pembuatan: 2023, Kondisi: baru, Multi-shell grab for excavators Terex Fuchs, Sennebogen, Liebherr Hjdpsn E Scpofx Adqefn

Tahun pembuatan: 2023, Kondisi: baru, Polyp scrap grab for Palfinger Hiab cranes Capacity: 300 l / 0.3 m³ Model: 4-tine – semi-closed Gross weight: 450 kg Hfodpfx Adenzibloqsn