Beli Okuma Lb 200 M bekas (231)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, jarak pergerakan sumbu X: 560 mm, jarak lintasan sumbu Y: 560 mm, jarak gerak sumbu Z: 600 mm, produsen pengendali: OKUMA, kecepatan spindel (maks.): 8.000 rpm, jumlah sumbu: 4, This 4-axis Okuma MA-400HA horizontal machining center was manufactured in 2008. It offers robust construction and precision for demanding machining tasks. If you are looking for high-quality milling capabilities, you should consider the Okuma MA-400HA machine, which we are offering for sale. Contact us for further information. Additional Equipment • Tool changer gearbox is defective Machine Benefits Technical advantages of the machine • Pallet size: 400x400 mm / 2 pallets Itjdpfx Agsx U Trvo Red • B-axis rotary table (reversible) The following repairs have been carried out: 12/2022 - Replacement of the control unit (U2319), replacement of the ATC gearbox, replacement of the telescopic cover of the X-axis (H1090-0025-98-2). Minor parts have been replaced regularly (hoses, sensors, bulbs, etc.). The spindle is in good condition, with no major damage. The machine produced accurately and within tolerance until its last operational moment. Regarding the non-functioning tool changer gearbox - there is increased play in the gearbox, so the tool is not optimally aligned with the spindle axis when entering the spindle during the changeover. Most likely, the bearing/cams in the gearbox are damaged. All service work has been carried out by an authorized OKUMA machine service provider.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 900 mm, jarak gerak sumbu Z: 1.000 mm, tinggi total: 3.280 mm, beban meja: 1.200 kg, berat keseluruhan: 24.000 kg, kecepatan spindel (maks.): 12.000 rpm, jumlah sumbu: 4, This 4-axis Okuma MA 600H II was manufactured in 2019. It features a 630 × 630 mm table that can accommodate loads up to 1,200 kg, and a high-speed spindle with up to 12,000 rpm. The machine offers rapid traverse speeds of 60 m/min and a comprehensive tool magazine with 171 stations. If you are looking for a high-quality milling machine, you should consider the Okuma MA 600H II, which we have for sale. Contact us for more information. • Table/Palette • Usable table area: 630 × 630 mm • Maximum rotary dimensions: Ø1,000 × 1,000 mm • Standard indexing: 0.001° • Table indexing time (90°-180°): 2.0-3.0 sec • Pallet change time: 7 sec • Axis travel / Linear working area • Spindle center to table surface: 50-950 mm • Spindle nose to pallet center: 70-1,070 mm Itjdpfx Aox D Rtmjg Rjd • Cutting feed rate: 60,000 mm/min • Positioning accuracy X/Y/Z: ±0.004 mm (STD JIS) • Repeatability X/Y/Z: mm (STD JIS) • Spindle • Front bearing diameter: Ø60 mm • Coolant through spindle (CTS): Yes • Compressed air supply: 4-6 bar • Spindle cooling: Yes • Turning function: Yes • Tool magazine • Fixed position tool management: Yes • Tool change time (tool-to-tool): 1.9 seconds • Tool change time (chip-to-chip): 4.4 sec • Footprint (2-pallet version): 3.38 × 6.11 m • Installed power: 50 kVA Additional equipment • Chip conveyor: Mayfran Consep 2000 • Presetting at table edge • Interface for Renishaw probe (prepared for probing)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 900 mm, jarak gerak sumbu Z: 1.000 mm, tinggi total: 3.280 mm, berat keseluruhan: 24.000 kg, kecepatan spindel (maks.): 12.000 rpm, berat alat: 25.000 g, jumlah sumbu: 4, This 4-axis Okuma MA 600 HB was manufactured in 2011 and is notable for being a robust horizontal machining center. It features X, Y, and Z axis travels of 1,000 mm, 900 mm, and 1,000 mm respectively, and a maximum spindle speed of 12,000 rpm. The machine is equipped with a high-capacity chain magazine for 150 tools and fast tool change times. Take advantage of the opportunity to purchase this Okuma MA 600 HB horizontal machining center. Contact us for more information about this machine. • Spindle center to table surface: 50 to 950 mm • Spindle nose to pallet center: 70 to 1,070 mm • Table/Palette • Maximum rotary dimensions: 1,000 × 1,000 mm • Continuous table positions: 360,000 • Pallet change time: 7 seconds • Pallet type: MAS drilled • Through-spindle cooling: 20 bar • Compressed air pressure: 46 bar • Feed: • Cutting feed rate: 60,000 mm/min • Positioning accuracy X-Y-Z: 0.004 mm • Repeatability X-Y-Z: mm • Tool/Magazine • Tool change time (tool/tool): 1.9 s • Tool change time (chip/chip): 4.4 s • Tool selection: random • Max. tool diameter (adjacent pockets empty): 240 mm • Footprint: 3.38 × 6.11 m • Installed power: 50 kVA • Machine features • Work area shower wash system: Yes • Presetting at table edge: Yes • Probe/zero point shift device: Yes Additional Equipment • Chip conveyor: Mayfran Dimensions Isdpfox D Hzyex Ag Rstd Machine depth: 3380 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, jarak pergerakan sumbu X: 760 mm, jarak lintasan sumbu Y: 760 mm, jarak gerak sumbu Z: 760 mm, tinggi total: 2.864 mm, berat keseluruhan: 11.500 kg, kecepatan spindel (maks.): 15.000 rpm, berat alat: 10.000 g, jumlah sumbu: 4, This 4-axis Okuma MB 5000H was manufactured in 2010. It features a robust 500 × 500 mm pallet with a maximum load capacity of 500 kg and offers an extensive travel range of 760 mm in the X, Y, and Z axes. Equipped with a high-speed spindle up to 15,000 rpm and a 64-position tool magazine, this horizontal machining center is ideal for complex machining tasks. Contact us for more information about this machine. • Spindle center to pallet top: 50-810 mm • Spindle nose to pallet center: 135-895 mm • Table/pallet: 500 × 500 mm; load capacity 500 kg; 1° indexing • Workpiece capacity: max. Ø800 × 1,000 mm • Cutting feed rate: 1-60,000 mm/min; table indexing motor 3.0 kW • Tooling: MAS403/BT40 tool holder; MAS 2 retention knob; magazine for 64 tools; random selection • Footprint 2,700 × 4,710 mm Additional equipment • Chip conveyor • Through-spindle coolant (CTS) Itjdjx D Rrcspfx Ag Rsd • Tool presetting at table edge • Renishaw probe preparation • Shower/wash system

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, kecepatan spindel (maks.): 5.000 rpm, jarak pergerakan sumbu X: 580 mm, jarak lintasan sumbu Y: 80 mm, jarak gerak sumbu Z: 935 mm, produsen pengendali: OKUMA, model controller: OSP-P200L, jumlah sumbu: 5, This 5-axis Okuma Multus B300-W was manufactured in 2006. It features a robust turning-milling center with a bed overhang of 630 mm and a maximum turning diameter of 450 mm. Equipped with a bar feeder, tool changer, and tool magazine for 40 tools, it ensures efficient operation. The control system is an advanced Okuma OSP-P200L. If you are looking for a high-quality lathe, you should consider the Okuma Multus B300-W we have for sale. Contact us for more information. • ATC / Tool magazine: 40 positions Itsdpfxex D Rvhj Ag Rsd • Tool changer • Maximum distance between chucks: 900 mm • Maximum turning diameter: 450 mm • Sub-spindle: A2-6 nose; 38-5000 rpm • Indexing: C-axis 0.001°; B-axis 0.001° Additional equipment • Bar feeder IF • Approximately 60 HSK 63 tool holders • A half pallet of soft and hardened chuck jaws • 3 spindle stops (various lengths) • Various collets

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, kecepatan spindel (maks.): 5.000 rpm, jarak pergerakan sumbu X: 270 mm, jarak lintasan sumbu Y: 120 mm, daya motor spindle: 22.000 W, tinggi total: 2.330 mm, berat keseluruhan: 10.000 kg, panjang produk (maks.): 3.530 mm, jumlah sumbu: 5, This 5-axis Okuma LT 300 MY was manufactured in 2021 and features a maximum turning diameter of 350 mm and a bar capacity of 65 mm. It supports spindle speeds up to 5,000 rpm and is equipped with a motorized 12-station turret. This machine is ideal for complex turning operations, offering fast traverse speeds and a large distance between centers of 1,200 mm. Take advantage of this opportunity to purchase the Okuma LT 300 MY horizontal lathe. Contact us for more information. • Distance between centers: 1,200 mm • Maximum turning diameter: 350 mm • Swing diameter over guards: 550 mm • Spindle / sub-spindle: ASA 8 Iodpsx Imrisfx Ag Retd • Bar capacity: 65 mm • Tailstock/sub-spindle travel (W-axis): 940 mm • X-axis travel: 270 / 230 mm • Y-axis travel: ±60 mm • Z-axis travel (ZA / ZB): 930 / 920 mm • Rapid traverse (X / Z / W): 30 / 40 / 40 m/min • Y-axis rapid traverse: 26 m/min • Turret: 12 positions, motorized, VDI 40 • Turret index time: 0.25 s • Rotary tool speed/power: 100–4,500 rpm, 7.0 / 3.3 kW

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jarak pergerakan sumbu X: 1.450 mm, jarak lintasan sumbu Y: 1.050 mm, jarak gerak sumbu Z: 600 mm, beban meja: 600 kg, kecepatan spindel (maks.): 8.000 rpm, daya motor spindle: 15.000 W, jumlah sumbu: 5, en Ijdpfx Agjyia Tlj Retd

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Unit Kontrol Merek: OKUMA Model: OSP-P200M Penggerak Utama Kisaran kecepatan spindle: 15.000 rpm Pergerakan Iedox D Nf Ujpfx Ag Rotd Gerakan Sumbu X: 560 mm Gerakan Sumbu Y: 610 mm Gerakan Sumbu Z: 625 mm Pusat pemesinan horizontal 4-sumbu Okuma MA-400HA ini diproduksi pada tahun 2007. Mesin ini memiliki sumbu X 560 mm, sumbu Y 610 mm, sumbu Z 625 mm, dan ukuran meja 400x400 mm. Dilengkapi dengan spindle 15.000 rpm, majalah alat matrix 100 posisi, dan kontrol OSP-P200M. Juga dilengkapi pool palet/APC 6 palet serta konveyor serpihan Mayfran Consep 2000. Manfaatkan kesempatan untuk membeli pusat pemesinan horizontal Okuma MA-400HA ini. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Jenis Aplikasi Milling

Kondisi: baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 900 mm, diameter pembubutan: 450 mm, Okuma Multus B300-W bekas mesin multi CNC bubut termasuk Robot Kuka terbaru 70 kg (1-2 tahun), tanpa setup penanganan. Diameter bubut maksimum: 450 milimeter Panjang bubut maksimum: 900 milimeter 1 sabuk pemuatan - 1 sabuk pembongkaran - ekstraksi sendiri, 6 sumbu Itjdpfsyux S Hjx Ag Rsd

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, kecepatan spindel (min.): 5.000 rpm, jarak pergerakan sumbu X: 700 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 700 mm, kecepatan rotasi (maks.): 5.000 rpm, kecepatan rotasi (min.): 25 rpm, jenis arus masuk: tiga fasa, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, DETIL TEKNIS 2x Palet 500 x 500 mm Perjalanan sumbu X: 700 mm, sumbu Y: 800 mm, sumbu Z: 700 mm Ukuran meja: 500 mm x 500 mm, meja putar/sumbu B: diindeks dalam langkah 1°, 360 posisi Kapasitas beban meja: 800 kg Kecepatan spindle: 5.000 RPM Jarak hidung spindle-ke permukaan meja: 150 mm - 850 mm Tipe dudukan alat: MAS BT 50 Itedpfeyrgzkex Ag Rsd Magasin alat (ATC): 60 slot, jenis rantai Panjang alat maksimal: 450 mm DETAIL MESIN Kontrol: CNC OSP 100M DIMENSI & BERAT Berat mesin: 21.000 kg Dimensi (P x L x T): 5.500 x 3.160 x 3.300 mm Jam spindle: 18.500 PERLENGKAPAN Konveyor serbuk, sistem pendingin dengan filter saku untuk pendinginan internal

Kondisi: baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 762 mm, jarak lintasan sumbu Y: 460 mm, jarak gerak sumbu Z: 460 mm, produsen pengendali: OKUMA, model controller: OSP P200M, tinggi total: 2.950 mm, panjang total: 2.900 mm, lebar total: 2.600 mm, diameter meja putar: 400 mm, kecepatan rotasi (min.): 25 rpm, kecepatan rotasi (maks.): 15.000 rpm, berat keseluruhan: 8.000 kg, jam operasional spindle: 18.500 h, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, okuma-mu-400v-description Itodpfeyq Sl Eex Ag Rod

Kondisi: baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.050 mm, jarak lintasan sumbu Y: 560 mm, jarak gerak sumbu Z: 460 mm, produsen pengendali: OKUMA, model controller: OSP P200M, panjang benda kerja (maks.): 300 mm, tinggi total: 2.850 mm, panjang total: 3.200 mm, lebar total: 2.900 mm, lebar meja: 560 mm, tinggi meja: 800 mm, panjang meja: 1.300 mm, berat keseluruhan: 8.000 kg, kecepatan spindel (min.): 25 rpm, kecepatan spindel (maks.): 15.000 rpm, diameter alat: 125 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, OKUMA MB56 VA OSP P200M, ATC 32 alat SK40, konveyor serpihan, filter kantong untuk pendinginan internal, 15.000 rpm. Itedsyq R I Sopfx Ag Rjd Silakan tanyakan paket layanan lengkap kami: pemuatan, transportasi, pemasangan, commissioning, dan layanan purna jual.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 710 mm, diameter pembubutan: 710 mm, daya motor spindle: 11.000 W, kecepatan spindel (min.): 38 rpm, kecepatan spindel (maks.): 3.800 rpm, jarak pergerakan sumbu X: 690 mm, jarak lintasan sumbu Y: 115 mm, jarak gerak sumbu Z: 1.545 mm, gerak cepat sumbu X: 4 m/menit, pergeseran cepat sumbu Y: 26 m/menit, pergerakan cepat sumbu Z: 40 m/menit, kecepatan rotasi (maks.): 6.000 rpm, jenis arus masuk: tiga fasa, hidung spindel: JIS A2-8, berat keseluruhan: 14.000 kg, panjang alat: 300 mm, berat alat: 10 g, jarak perjalanan sumbu W: 1.550 mm, Perlengkapan: dokumentasi / manual, de Itodpfoyqx Rzox Ag Rsd

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, panjang pembubutan: 700 mm, jarak pergerakan sumbu X: 205 mm, jarak gerak sumbu Z: 700 mm, daya motor spindle: 22.000 W, tinggi total: 2.800 mm, panjang total: 6.000 mm, lebar total: 3.900 mm, berat keseluruhan: 9.800 kg, Complete machining with twin spindle, upper and lower turret Kitagawa 3-jaw chuck left and right Tool holders with driven tools, both axial and radial Large jaw cabinet with inserts OGL gantry loader with approx. 10 kg payload Chip conveyor Paper band filter system with pressure tank Max. turning diameter: 400 mm X-axis: 205 mm Z-axis: 700 mm Spindle bore: 62 mm Spindle speed: 6000 rpm Spindle power: 22 kW Counter spindle speed: 6000 rpm Counter spindle through-hole: 62 mm Counter spindle power: 15 kW Tool changer: 16 positions Speed of driven tools: 6000 rpm Positions lower turret: 16 Driven tool speed: 6000 rpm Driven tool power: 7 kW Chip conveyor: yes Tool Eye: yes Length: 6000 mm Width: 3900 mm Height: 2800 mm Weight: 9800 kg Itodpsyn Em Rsfx Ag Rod Please note: The information on this page has been provided to the best of our knowledge, and wherever possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, neither representation nor contract terms are implied. We recommend verifying all important details.

Tahun pembuatan: 2007, Kondisi: sangat baik (bekas), X-AXIS TRAVEL: 762 MM Y-AXIS TRAVEL: 560 MM Z-AXIS TRAVEL: 460 MM SPINDLE SPEED: 15,000 RPM SPINDLE TAPER: BT 40 TABLE SIZE: 460 X 760 MM MAXIMUM LOAD: 400 KG RAPID TRAVERSE X/Y AXIS: 40,000 MM/MIN RAPID TRAVERSE Z AXIS: 32,000 MM/MIN FEED RATE IN OPERATION: 32,000 MM/MIN TOOL MAGAZINE CAPACITY: 20 POSITIONS TOOL CHANGE TIME: 1.2 SEC – 3.8 SEC Isdspyg Rkspfx Ag Rotd MAXIMUM TOOL WEIGHT: 8 KG MAXIMUM TOOL LENGTH: 300 MM CONTROL UNIT: OSP - P200M

Kondisi: baik (bekas), Tahun pembuatan: 2005, The machine was serviced annually through a maintenance contract with Okuma. Okuma Mac Turn 550 W, Year of manufacture: 2005, Control: OSP-E 100 L, Max. turning diameter: 720 mm, Distance between tailstock and spindle nose: 2,505 mm, Y-axis travel: 250 mm, Main spindle speed up to 3,500 rpm, Spindle power: 30 kW Lower turret, 12 stations, Milling spindle with infinitely variable B-axis, Magazine with 80 stations, HSK 100 tool holder, Three-jaw chuck, diameter 315 mm, In 2023, the cable drag chain for the W-axis, including all hoses, was replaced. In October 2024, the linear guides X/Y/Z were replaced. All work was carried out by Okuma. Machine was cleaned. Sheet metal and covers were disassembled. 8th axis was removed. Gantry was disassembled and lifted out of the machine. ATC was removed and lifted out of the machine. All linear guides were removed. Contact surfaces of the ZA-axis were cleaned. New ZA linear guide, including carriages, was installed and tightened to specified torque. New ball screw for ZA-axis, including bearings, was installed and fitted. Base plate of the gantry was installed and tightened to specified torque or bolted to the carriages. Lubrication lines were connected. ATC including attachments was installed and connected. New YA and XA linear guides were installed and tightened to specified torque. New ball screw for YA-axis, including bearings, was installed. Itsdpfx Agjyt Nvte Rsd Gantry was installed and lubrication lines connected. XA base plate was installed and aligned. 8th axis was installed and aligned. H1 turret installed. - Drive motor for 8th axis assembled - Assembly of 8th axis + new H1 and geometry adjustment - Function test for 8th axis and H1 - Run-in program for B-axis approx. 12 h, then drain old oil from the 8th axis - Run-in program for H1 and defect report for OEG to be created - Left door installed, various sheet metals adjusted - Chuck installed - Zero points adjusted - Tool change checked

Kondisi: baik (bekas), Tahun pembuatan: 2004, Pusat pembubutan dan frais CNC dengan 9 sumbu CNC, Okuma Mac Turn 350 W, tahun pembuatan 2004, OSP-E 100L, 80 Ww fac, dudukan HSK 63, sumbu B tanpa tingkat sebagai spindle milling, revolver bawah 12 posisi dengan alat bertenaga, sistem filter kompak Interlite 900 l, sistem ektraksi, waktu operasi spindle sekitar 18.300 jam, konveyor serbuk, lengan gripper pengganti alat telah diperbarui sepenuhnya, pendinginan tekanan tinggi, lengan pengukur alat, pengganti alat telah direkondisi, spindle utama Kitagawa B-210, spindle penyangga Kitagawa B-208. Itodpfsyt H U Tjx Ag Red

Kondisi: bekas, Tahun pembuatan: 1988, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: OSP5000M-G, Pusat mesin vertikal OKUMA MC-30VA, mesin Jepang dengan tingkat keandalan tinggi. Mesin berfungsi dan lengkap, digunakan hingga baru-baru ini. Fitur utama: • Merek: OKUMA • Model: MC-30VA • Kontrol numerik: OSP5000M-G • Tahun: 1988 • Pusat mesin vertikal dengan penukar alat otomatis • Struktur sangat kokoh khas mesin Jepang • Mesin lengkap, tidak diambil suku cadangnya Mesin dapat dilihat beroperasi di bengkel kami. Ideal untuk: • bengkel mekanik • sekolah teknik • ekspor ke pasar luar negeri • penggunaan untuk pekerjaan umum Kondisi: berfungsi. Dijual apa adanya. Itodpfjyt E H Usx Ag Rjd Pemuatan dan transportasi menjadi tanggung jawab pembeli.

Kondisi: baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: fungsi terbatas, jarak pergerakan sumbu X: 560 mm, jarak lintasan sumbu Y: 610 mm, jarak gerak sumbu Z: 625 mm, gerak cepat sumbu X: 60 m/menit, pergeseran cepat sumbu Y: 60 m/menit, pergerakan cepat sumbu Z: 60 m/menit, produsen pengendali: Okuma, model controller: OSP-E100M, panjang benda kerja (maks.): 600 mm, lebar benda kerja (maks.): 710 mm, berat benda kerja (maks.): 400 kg, tinggi total: 2.760 mm, panjang total: 4.535 mm, lebar total: 2.415 mm, lebar meja: 400 mm, panjang meja: 400 mm, beban meja: 400 kg, berat keseluruhan: 11.500 kg, kecepatan spindel (maks.): 10.000 rpm, jarak dari tengah meja ke hidung spindel: 710 mm, daya motor spindle: 15.000 W, hidung spindel: BT40, jumlah spindel: 1, jumlah slot dalam magazin alat: 40, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, horizontal-machining-center-de Itjdpfx Ajwcd Evjg Rod

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, jam operasional: 930 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 660 mm, jarak lintasan sumbu Y: 460 mm, jarak gerak sumbu Z: 360 mm, produsen pengendali: Okuma, model controller: OSP P300MA + 3D kit, berat benda kerja (maks.): 350 kg, lebar meja: 760 mm, panjang meja: 460 mm, berat keseluruhan: 7.000 kg, kecepatan spindel (maks.): 20.000 rpm, jam operasional spindle: 930 h, daya motor spindle: 15.000 W, hidung spindel: HSKA63, jumlah slot dalam magazin alat: 20, jenis arus masuk: tiga fasa, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, CNC vertikal presisi tinggi untuk Die/Mold, rangka & spindle dengan pendingin aktif. Kontrol 0,1μm, 4 angka di belakang koma. Opsi penuh termasuk Renishaw, udara pada spindle, pengukuran laser, dll. Lihat PDF terlampir untuk daftar detail termasuk opsi perangkat lunak dan aksesoris! Sudah dibersihkan dan siap untuk instalasi. Semua pemeriksaan diperbolehkan (biaya pembeli, mesin disimpan di gudang, daya 380V tersedia), kami dapat meminta Okuma untuk membuat laporan pengujian jika diperlukan. Pemuatan gratis ke truk. Transportasi di dalam EU juga dapat diatur. Kondisi seperti baru, 930 jam pada spindle, harga baru 300.000 euro, sehingga hemat 125.000 euro untuk mesin kondisi seperti baru. Isdpowzzrkefx Ag Rotd

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, Okuma Macturn 30 1SW 1000, OSP 7000M, chip conveyor, ATC 24 BT40, 8 bar coolant pump, gear hobbing option, approx. 12,500 spindle hours, HS Big Bore, GS Standard Bore Neff – The Okuma Specialist and NeffBuy We are also pleased to offer you our comprehensive all-inclusive package: inspection in our showroom (30 Okuma machines) including demonstration and acceptance, loading, transport, installation and commissioning of the machine, as well as operator training and subsequent after-sales service. Itsdpfx Agsvta Rkj Rsd Bjsvkhv0lno We provide Okuma CNC service throughout Europe, both electronically and mechanically. Additionally, we have a 1,200 m² inventory of all Okuma spare parts. Please feel free to visit our website for more information.

Kondisi: bekas, Tahun pembuatan: 2019, Mesin Frais 4-Sumbu OKUMA MA600HII tahun 2019 dengan Kontrol OSP P300M, meja 630 x 630 mm, beban maksimum hingga 1.200 kg, spindle berkecepatan tinggi 12.000 rpm, kecepatan gerak 60 m/menit, majalah alat berkapasitas penuh dengan 171 tempat, perjalanan sumbu X 1000 mm, perjalanan sumbu Z 1000 mm, perjalanan sumbu Y 900 mm. No. Seri: 224574 (2019) Biaya persiapan dan pemuatan ke transportasi yang sesuai sebesar €4.500 secara otomatis akan ditambahkan ke faktur Anda jika Anda berhasil membeli barang ini. Itedpfx Ageyplrpo Red Lokasi: Lot ini berada di Mielec, Polandia. Silakan kunjungi situs web kami untuk informasi lebih lanjut. Lelang 3459

Kondisi: baik (bekas), Tahun pembuatan: 2006, Pusat pemesinan 3-sumbu Okuma MB-66 VA Kontrol: OSP-P 200M Tahun pembuatan: 2006 Sumbu X: 1.500 mm Sumbu Y: 660 mm Sumbu Z: 660 mm Tipe holder alat: SK 40 MASBT Itjdpfjylwp Sjx Ag Rod Majalah alat: 32 slot Kecepatan putar: 8.000 rpm Perlengkapan: ONE touch IGF Konveyor chip rantai engsel Handwheel elektronik Pendingin internal 20 bar

Kondisi: baik (bekas), Tahun pembuatan: 2005, Pusat Pemesinan Vertikal Okuma MB 46-VAE Kontrol: OSP-E100M Tahun pembuatan: 2005 Isdpfx Aoylwdcog Retd Perjalanan: Sumbu X: 600 mm Sumbu Y: 460 mm Sumbu Z: 460 mm Berat benda kerja maks.: 500 kg Luas meja penjepitan: 1.000 x 460 mm Tipe spindle: SK 40 DIN ISO 69871 Majalah alat: 32 slot Kecepatan spindle maks.: 15.000 rpm Aksesori - IKZ / Pendinginan internal - Konveyor serpihan - Drive USB

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Mesin bubut CNC Okuma LU 3000 EX MY 2SC950 Kontrol: OSP-P300 Tahun pembuatan: 2014 Panjang putar maks.: 950 mm Diameter putar maks.: 340 mm Itjdpfjyluvisx Ag Rjd Diameter putar maks. di atas carriage: 380 mm Diameter putar maks. di atas bed: 580 mm Kecepatan putar maks.: 4.200 rpm Sistem penjepit alat: BMT 2 buah turret alat Turret A: 12 posisi alat (semua digerakkan) Turret B: 8 posisi alat Tailstock Konveyor serbuk logam Chuck hidrolik B210/A8 Touchsetter Pompa pendingin bertekanan tinggi Tangki air yang diperbesar