Beli Okuma Lc 20 bekas (208)

Kondisi: baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: fungsi terbatas, jarak pergerakan sumbu X: 560 mm, jarak lintasan sumbu Y: 610 mm, jarak gerak sumbu Z: 625 mm, gerak cepat sumbu X: 60 m/menit, pergeseran cepat sumbu Y: 60 m/menit, pergerakan cepat sumbu Z: 60 m/menit, produsen pengendali: Okuma, model controller: OSP-E100M, panjang benda kerja (maks.): 600 mm, lebar benda kerja (maks.): 710 mm, berat benda kerja (maks.): 400 kg, tinggi total: 2.760 mm, panjang total: 4.535 mm, lebar total: 2.415 mm, lebar meja: 400 mm, panjang meja: 400 mm, beban meja: 400 kg, berat keseluruhan: 10.000 kg, kecepatan spindel (maks.): 8.000 rpm, jarak dari tengah meja ke hidung spindel: 710 mm, daya motor spindle: 15.000 W, hidung spindel: BT40, jumlah spindel: 1, jumlah slot dalam magazin alat: 40, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, de-001 Nedpjwcd Evofx Adiocw

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, This Okuma MCR-A5C30x65 portal milling machine was manufactured in 2013. It features a robust 100 mm spindle with speeds up to 4,000 rpm and can accommodate workpieces with a maximum size of 2,540 mm x 5,540 mm. The machine’s large table, measuring 2,500 × 6,300 mm, supports a proud 30,000 kg. Ideal for heavy-duty milling operations with a rapid traverse rate of 20,000 mm/min. Contact us for more information about this machine. Machine Advantages Nodpjx D S Ekjfx Adiocw Technical Machine Advantages • Machine dimensions (L×W×H): 2,500 mm x 6,600 mm x 6,350 mm / Weight: 59,000 kg • Maximum workpiece width: 2,540 mm / Maximum workpiece length: 5,540 mm • Table size (width × length): 2,500 mm × 6,300 mm / Max. table load: 30,000 kg / Table height from floor: 850 mm / Effective width between columns: 3,050 mm / T-slot (width × number): 24H7 × 13 • Cutting feed rate: 1 to 10,000 mm/min / Rapid traverse: 20,000 mm/min / Table travel X-axis: 6,500 mm / X-axis travel: 6,500 mm / Y-axis travel: 3,500 mm / Z-axis travel: 650 mm • Tool holder: Type BT50 + MAS / Tool magazine capacity: 50 tools / Maximum tool length: 300 mm • Power supply: 400V, 3-phase, 50Hz / Rated power: 513 kVA / Full load current: 741 A / Peak current: 117/138 A / Short-circuit current: 18 kA • Spindle diameter: 100 mm / Spindle speed: 30 to 4,000 rpm • Large table suitable for heavy loads / Large tool storage capacity / High rapid traverse for efficient operations.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, kecepatan spindel (maks.): 4.200 rpm, jarak pergerakan sumbu X: 200 mm, jarak gerak sumbu Z: 1.000 mm, daya motor spindle: 22.000 W, tinggi total: 2.300 mm, lebar total: 2.100 mm, berat keseluruhan: 6.100 kg, panjang produk (maks.): 3.900 mm, jumlah slot dalam magazin alat: 24, jumlah sumbu: 5, This 5-axis Okuma LB3000EX MYW was manufactured in 2008. It features a maximum turning diameter of 360 mm and a Z-axis travel of 1000 mm. The machine is equipped with a twin-spindle configuration and an OSP-P200 control system. If you are looking for a high-quality lathe, you should consider the Okuma LB3000EX MYW horizontal turning center we have for sale. Contact us for further details. • OKUMA OSP P200L control system • OSP-P200 control • 12-station radial tool turret • Turret: 12 stations • Number of turrets: 2 • Toolholder: BMT 60 • Number of tools: 24 • Driven tool station power: 7.1 kW • Driven tool torque: 40.4 Nm • Driven tool speed range: 45-6000 rpm • C-axis included • Y-axis travel: mm • X-axis travel: 200 mm • Z-axis travel: 1000 mm • Hydraulic Y-axis clamping • Sub-spindle with W-axis • Spindle configuration: twin-spindle • Main spindle bore: 110 mm • Spindle bore approx.: 80 mm • Spindle nose: A2-11 • Spindle speed range: 28-2800 rpm • Spindle speed: 4200 rpm • Main spindle VAC drive: 22/15 kW • Power at 40% duty cycle: 22 kW • Max. turning diameter: 360 mm • Programmable chuck pressure (2 stages) • Thread milling interpolation X/Y and Z/Y axes • Programmable parts catcher • Chip conveyor with integrated coolant tank • Heavy-duty paper band filtration system • Coolant tank capacity: 480 l • Coolant pump: 40 l/min at approx. 20 bar • Coolant pump type: Brinkmann TH 90/690-FSI • Extraction nozzle diameter: 200 mm • Hollow clamping cylinder bore: 110 mm Ncodpfx Aoy Ddtvsdiew • Power chuck: FORKARD QLC-KS 250-101 Z8 • Chuck bore: 101 mm • Draw tube for spindle max. 100 mm • Clamping range: 42-100 mm • Manual collet change device • Sub-spindle stroke: 150 mm • Bar capacity diameter: 5-100 mm • Spindle reduction tube diameter: 90 mm, length 1500 mm • Chip removal conveyor: PVC with PU coating • Hydraulic clamping cylinder bore: 52 mm • Machine dimensions: 3.9 m x 2.1 m x 2.3 m • Machine weight approx.: 6100 kg • Maintenance contract: yes • Utilization: 60% Additional equipment • Bar feeder • OPTIONAL at extra cost: approx. 200 tools available, collets, power tools Technical Specification Counter Spindle No Driven Tools Yes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jarak pergerakan sumbu X: 925 mm, jarak lintasan sumbu Y: 1.050 mm, jarak gerak sumbu Z: 600 mm, beban meja: 600 kg, kecepatan spindel (maks.): 12.000 rpm, daya motor spindle: 26.000 W, jumlah sumbu: 5, This 5-axis Okuma MU 6300 V was manufactured in 2016. It features an impressive X-axis travel of 925 mm, Y-axis travel of 1,050 mm, and Z-axis travel of 600 mm. The machine has a maximum load capacity of 600 kg and a C-axis table diameter of 630 mm. If you are looking for high-quality machining capabilities, consider the Okuma MU 6300 V vertical machining center we offer for sale. Contact us for further details. • Table/C-axis diameter: 630 mm • Max. machinable dimensions: Ø 830 x 550 mm • C-axis rotation: 360,000 positions / 360° continuous • A-axis rotation: +90° to -120° • Distance between table and spindle: 60 – 660 mm • Rapid traverse (X/Y/Z): 50 m/min • Maximum feed rate: 50,000 mm/min • Positioning accuracy (X/Y/Z): 0.004 mm (Std JIS) • Repeatability (X/Y/Z): mm (Std JIS) • Spindle taper: BT50 Big Plus • Tool magazine: Matrix, 98 positions (expandable to 166) • Axis feedback: X-Y-Z optical scales • Operating hours: Power on 25,683 h; Operation 10,364 h; Cutting 9,209 h • Included control/software options: 5-Axis Super-NURBS kit, tool centering programming, tool length compensation, DNC-DT interface, tool orientation command Additional Equipment Ncjdpfx Asy Dc Nijdiew • Mayfran MT10 chip conveyor • Renishaw TS27R tool setter • Renishaw RMP60 workpiece probe • 5-axis calibration kit • Washdown system • Pallet changer ready (preparation) • Industry 4.0 kit (registered until 2026) Technical Specification Taper Size BT 50

Kondisi: bekas, Tahun pembuatan: 1994, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0607.1447, diameter putar di atas sled silang: 340 mm, panjang pembubutan: 520 mm, diameter pembubutan: 530 mm, lubang spindel: 62 mm, kecepatan spindel (maks.): 4.500 rpm, kecepatan spindel (min.): 45 rpm, jarak lintasan sumbu Y: 260 mm, jarak gerak sumbu Z: 520 mm, daya motor spindle: 15.000 W, pergeseran cepat sumbu Y: 15 m/menit, pergerakan cepat sumbu Z: 20 m/menit, tinggi total: 1.750 mm, panjang total: 3.000 mm, lebar total: 1.700 mm, jenis arus masuk: tiga fasa, berat keseluruhan: 5.000 kg, Perlengkapan: dokumentasi / manual, Kontrol OKUMA OSP5020L 12 perkakas Pengeluaran serbuk otomatis Njdpsy Stxqjfx Adiocw

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, jam operasional: 18.533 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: PA158, panjang pembubutan: 450 mm, diameter pembubutan: 300 mm, berat benda kerja (maks.): 9 kg, panjang benda kerja (maks.): 150 mm, diameter benda kerja (maks.): 225 mm, de-to-hu-it-lt-001 Ncsdpfx Adoy R Uy Hsiew

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1938, panjang pembubutan: 850 mm, diameter pembubutan: 340 mm, kecepatan spindel (maks.): 4.500 rpm, panjang benda kerja (maks.): 850 mm, diameter benda kerja (maks.): 300 mm, 1 Ncodpfxoy R Uxie Adisw

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, LT-2512 Manufacturer: Okuma Model: LVT300-M Control: Okuma OSP-P200L Year of manufacture: 2007 Keyboard/Software language: International / Spanish Country of origin: Japan Technical Specifications: Capacity: Swing over bed: Ø 280 mm Swing over Z carriage: Ø 280 mm Swing over X carriage: Ø 280 mm Max. turning diameter x length: Ø 280 x 200 mm Main Spindle: Spindle diameter: Ø 100 mm Spindle nose (type): JIS A2-6 Spindle bore diameter: Ø 62 mm Speed ranges: 2 ranges, stepless speed variation Spindle speed: 40 – 4,000 rpm Motor: 22/15 kW (20 min/continuous), VAC type X Axis: Travel: 210 mm + 845 mm (for workpiece loading) Cutting feed: 0.001 – 1,000.00 mm/rev Rapid traverse: 60,000 mm/min Z Axis: Travel: 360 mm Cutting feed: 0.001 – 1,000.00 mm/rev Rapid traverse: 30,000 mm/min Turret: Type: VDI 40 Number of tools: 12 (L or M) Tool dimensions External turning: 25 x 25 mm Internal turning: Ø 40 mm Live Tooling: Rotational speed: 45 – 4,500 rpm Speed ranges: 1 range, stepless speed variation Motor: 3.7/2.2 kW (15 min/continuous) C Axis: Controlled angle: 360° (0.001° increments) Ncodpfx Aoy Smz Esdijw Rapid traverse: 200 rev/min Dimensions and weights: Machine height: 2,500 mm Floor space required: 1,320 x 2,800 mm Machine weight: 5,600 kg Included options: EWAB palletized conveyor (pallets not included) MAYFRAN chip conveyor FORKARDT 3QLC 200-54 hydraulic chuck (3 jaws / 210 mm) Tool measurement sensor (TOUCH SETTER) Tool Life Management function Rigid tapping DNC-T1

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, kecepatan spindel (maks.): 5.000 rpm, jarak pergerakan sumbu X: 260 mm, jarak gerak sumbu Z: 565 mm, daya motor spindle: 22.000 W, tinggi total: 2.300 mm, lebar total: 2.100 mm, berat keseluruhan: 6.000 kg, panjang produk (maks.): 3.900 mm, jumlah sumbu: 3, This 3-axis Okuma LB3000 EX was manufactured in 2008. It features a maximum turning diameter of 340 mm and a center distance of 1020 mm. The machine is equipped with a powerful OSP-P200 control system and offers a spindle speed range of 45-5000 rpm. If you are looking for a high-quality lathe, you should consider the Okuma LB3000 EX horizontal turning machine we have for sale. Contact us for further details. • OSP-P200 control system • 12-station radial tool turret • Turret with 12 driven tools • Number of turrets: 1 • Tool holder: BMT 60 • Number of tools: 12 • Approx. 200 tools available • Power of driven tool stations: 7.1 kW • Torque of driven tool: 40.4 Nm • Driven tool speed range: 45–6000 rpm • C-axis included • Sub spindle with W-axis • Main spindle bore: 110 mm • Spindle bore: 80 mm • Spindle nose: A2-11 • Spindle speed range: 28–2800 rpm • Spindle speed: 45–5000 rpm • Main spindle drive: 22/15 kW • Power at 40% duty cycle: 22 kW • Maximum turning diameter: 340 mm • Center distance: 1020 mm • Programmable chuck pressure (2 stages) • Thread milling interpolation X/Y and Z/Y axes • Programmable parts catcher • Chip conveyor with integrated coolant tank • Heavy-duty paper band filtration unit • Coolant tank capacity: 480 l Ncodpfx Adoy Aaxroiow • Coolant pump: 40 l/min at approx. 20 bar • Coolant pump type: Brinkmann TH 90/690-FSI • Extraction port diameter: 200 mm • Through-hole cylinder bore: 110 mm • Power chuck FORKARD QLC-KS 250-101 Z8 • Chuck bore: 101 mm • Draw tube for spindle max. 100 mm • Collet chuck Hainbuch Axfix 100 • Clamping range: 42–100 mm • Manual collet change device • Sub spindle stroke: 150 mm • Bar feeder interface • Short bar loader IRCO ILS RBK • Bar capacity diameter: 5–100 mm • Spindle reducing tube diameter: 90 mm, length: 1500 mm • Chip removal conveyor PVC with PU coating • Hydraulic clamping cylinder bore: 52 mm • Machine dimensions: 3.9 m x 2.1 m x 2.3 m • Machine weight: 4000–6000 kg • Maintenance contract: Yes • Utilization: High OPTIONAL at extra cost: Approx. 200 tools available Electrical maintenance was performed 1.5 years ago, with several electrical components replaced or cleaned. Technical Specification Counter Spindle: No Driven Tools: Yes

Kondisi: baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 900 mm, jarak gerak sumbu Z: 810 mm, kecepatan spindel (maks.): 6.000 rpm, jumlah spindel: 1, jumlah slot dalam magazin alat: 150, Pusat pemesinan horizontal Okuma MA-600HB bekas Tahun: 2008 Pendingin spindle Maks. 6000 rpm Z- 810 mm X- 1000 mm Y- 900 mm Majalah alat untuk 150 alat 1 spindle Nsdpfx Adeyrf I Aeiecw 4 sumbu Sistem palet 10 buah Kami memiliki 2 unit. Harga per unit, ex works.

Kondisi: baik (bekas), Tahun pembuatan: 2008, jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 900 mm, jarak gerak sumbu Z: 810 mm, kecepatan spindel (maks.): 6.000 rpm, Okuma MA-600 HB Horizontal Machining Center bekas, tahun 2008, termasuk fungsi turncut, pendinginan spindle, 6000 rpm, Z-810, X-1000, Y-900, majalah alat untuk 150 alat, 1 spindle, 4 sumbu, fungsi 6 palet. Nodpfeywicvex Adiecw

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, jam operasional: 21.269 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0082, panjang pembubutan: 1.500 mm, diameter pembubutan: 580 mm, jarak pergerakan sumbu X: 598 mm, jarak lintasan sumbu Y: 230 mm, jarak gerak sumbu Z: 1.660 mm, TECHNICAL SPECIFICATIONS Travel X-axis: 598 mm Travel Y-axis: 230 mm Travel Z-axis: 1,660 mm Maximum turning diameter: 580 mm Turning length: 1,500 mm Swing diameter over bed: 610 mm Swing diameter over cross slide: 580 mm Main spindle Main spindle speed range: 12 - 2,800 rpm Spindle bearing diameter: 150 mm Spindle bore: 110 mm Spindle nose: JIS A2-11 Main spindle drive power: 37 (30) kW C-axis accuracy: 0.001 ° Rapid traverse X/Y: 12,000 mm/min Rapid traverse Z: 20,000 mm/min Rapid traverse C: 100 rpm Cutting feed speed: 0.001 - 1,000 mm/rev Turret Type: H2 ATC Number of tool stations: 2 (1x L-Tool / 1x M-Tool) pos. Driven stations: infinitely variable Speed range - driven tool stations: 40 - 3,000 rpm Tool shank height: 25 mm Boring bar shank diameter: 50 mm Tailstock Quill diameter: 120 mm Quill stroke: 170 mm Tailstock taper: MT 5 Tool magazine Number of tool stations: 50 pos. Tool holder: MAS BT 50 Max. tool diameter: 170 mm Nedpfx Adsyxmyueiscw Max. tool length: 350 mm Max. tool weight: 20 kg Magazine drive: 3.2 kW MACHINE DETAILS Total connected load: 53 kVA Dimensions & Weight Space requirements: 6.0 x 3.2 x 3.0 m Machine weight: 18.5 t Operating hours Main switch on-hours: 79,607 h NC operating hours: 27,814 h Main spindle hours: 21,269 h EQUIPMENT Chip conveyor Central coolant system High-pressure cooling, 20 bar Tailstock Signal lamp C-axis Y-axis Hydraulic unit Steady rest Various tool holders (44 pcs) Three-jaw chuck Schunk - ROTA NC 400-120 Electronic handwheel

Kondisi: baik (bekas), Teile, die mit der Hand gezeigt werden, sind nicht im Lieferumfang enthalten. Ncjdeyb R Erspfx Adisw

Kondisi: baik (bekas), Tahun pembuatan: 2007, jam operasional: 14.500 h, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 370 mm, panjang pembubutan: 1.000 mm, diameter pembubutan: 340 mm, lubang spindel: 62 mm, kecepatan spindel (maks.): 5.000 rpm, tinggi total: 1.900 mm, panjang total: 3.200 mm, lebar total: 2.200 mm, berat keseluruhan: 7.500 kg, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, OKUMA LB300MC1000, kontrol OSP P200L, revolver V12 VDI40, alat berputar V12 dengan VDI40, kepala lepas manual, konveyor serbuk, pompa pendingin, spindle standar 5000 RPM, alat pengukur sentuh. Ncedpfx Adjymfmnjiow

Kondisi: baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, Okuma Multus B300-W Mesin Bubut-Milling 6 Axis - Okuma OSP P200L - Tahun pembuatan 2008 - Waktu pemotongan 10.500 jam Ncsdpfeyg Rf Njx Adisw - Spindel milling H1 6000 rpm - Spindel utama 3800 rpm, Rota NC 315-86 - Spindel sub 5000 rpm - ATC 60 sistem HSKA-63 (60 alat) - Geometri sangat baik - Sensor alat Marpos

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, Okuma Macturn 30 1SW 1000, OSP 7000M, chip conveyor, ATC 24 BT40, 8 bar coolant pump, gear hobbing option, approx. 12,500 spindle hours, HS Big Bore, GS Standard Bore Njdpfxjvta Rkj Adijcw Neff – The Okuma Specialist and NeffBuy We are also pleased to offer you our comprehensive all-inclusive package: inspection in our showroom (30 Okuma machines) including demonstration and acceptance, loading, transport, installation and commissioning of the machine, as well as operator training and subsequent after-sales service. Bjsvkhv0lno We provide Okuma CNC service throughout Europe, both electronically and mechanically. Additionally, we have a 1,200 m² inventory of all Okuma spare parts. Please feel free to visit our website for more information.

Kondisi: baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, kecepatan spindel (min.): 3.200 rpm, tinggi total: 1.700 mm, panjang total: 2.700 mm, lebar total: 1.900 mm, berat keseluruhan: 6.500 kg, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, OKUMA ES L II-M Tahun 2002 Mesin bubut kecil yang sangat kompak dengan banyak kemampuan. Nedpsyna Uiofx Adiocw Kontrol U-10L, penangkap benda kerja, touchsetter, revolver V12 VDI 30 semua stasiun digerakkan, tailstock manual, konveyor serpihan, pompa pendingin, loader batang Samsys MUS-3000 Tahun 2007, dilengkapi perlengkapan, chuck SMW KNCS-N210-52, paket rahang dan 24 alat tersedia secara opsional.

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, kecepatan spindel (min.): 5.000 rpm, jarak pergerakan sumbu X: 700 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 700 mm, kecepatan rotasi (maks.): 5.000 rpm, kecepatan rotasi (min.): 25 rpm, jenis arus masuk: tiga fasa, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, DETIL TEKNIS 2x Palet 500 x 500 mm Perjalanan sumbu X: 700 mm, sumbu Y: 800 mm, sumbu Z: 700 mm Ukuran meja: 500 mm x 500 mm, meja putar/sumbu B: diindeks dalam langkah 1°, 360 posisi Kapasitas beban meja: 800 kg Kecepatan spindle: 5.000 RPM Jarak hidung spindle-ke permukaan meja: 150 mm - 850 mm Tipe dudukan alat: MAS BT 50 Magasin alat (ATC): 60 slot, jenis rantai Panjang alat maksimal: 450 mm DETAIL MESIN Kontrol: CNC OSP 100M DIMENSI & BERAT Berat mesin: 21.000 kg Dimensi (P x L x T): 5.500 x 3.160 x 3.300 mm Ncedpfjyrgzkox Adijw Jam spindle: 18.500 PERLENGKAPAN Konveyor serbuk, sistem pendingin dengan filter saku untuk pendinginan internal

Kondisi: bekas, Tahun pembuatan: 2008, jam operasional: 18.349 h, panjang pembubutan: 1.000 mm, diameter pembubutan: 340 mm, kecepatan spindel (maks.): 4.800 rpm, Dibuat tahun 2008, Waktu pemotongan 18.349 jam, OSP P200L, 4 sumbu, double turret VDI40, Turret A VDI40 V12 dengan alat hidup, Turret B VDI40 V8, Diameter pembubutan 340 mm, Panjang pembubutan 1.000 mm, Lubang spindle standar, Spindle utama 4.800 rpm, Tailstock manual, Touchsetter, konveyor serpihan, stasiun pendingin, kondisi kerja & geometris baik, alat opsional tersedia. Nedpfx Adjyu N Uxoijcw

Kondisi: baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Okuma MB56VA Ncsdoyiu D Ijpfx Adisw Pusat Pemesinan Vertikal 3-Axis U100M ATC 32 alat, SK40 Spindel utama 12.000 rpm Penghisap kabut oli Waktu pemotongan: 9.675 jam Konveyor serbuk (chip conveyor) Sistem pendingin cairan Persiapan untuk sumbu A (sumbu ke-4) *opsional berbagai tool SK40 sesuai mesin tersedia

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, kecepatan spindel (maks.): 6.000 rpm, jarak pergerakan sumbu X: 240 mm, jarak gerak sumbu Z: 240 mm, daya motor spindle: 15.000 W, jumlah sumbu: 3, Okuma LB15i-M 3-sumbu ini diproduksi pada tahun 1997. Mesin ini memiliki kecepatan spindle hingga 6000 rpm dan daya spindle sekitar 15 kW. Mesin dilengkapi dengan 5 alat front bermotor dan 2 alat radial, memberikan kemampuan pemesinan yang serbaguna. Jika Anda mencari mesin bubut berkualitas tinggi, pertimbangkan Bubut Horizontal Okuma LB15i-M yang kami tawarkan untuk dijual. Silakan hubungi kami untuk detail lebih lanjut. Njdpfxoywu Sis Adiscw • Posisi turret: 12 • Alat penggerak: Ya (5 depan + 2 radial) • Ekor tetap: tersedia (perlu diaktifkan) • Jarak antara senter: 500-1000 mm • Hidung spindle: JIS A2-6 Spesifikasi Teknis Spindle penyeimbang: Tidak Alat penggerak: Ya

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, Data Umum Berat mesin: 14.500 kg Pergerakan Pergerakan Sumbu X: 350 mm Pergerakan Sumbu Z: 410 mm Penggerak Utama Jumlah sumbu: 2 Kecepatan spindle: 2.500 RPM Okuma 2SP-V35 ini diproduksi pada tahun 2000. Mesin bubut vertikal yang kokoh dengan diameter putar maksimum 350 mm dan tinggi 410 mm. Dilengkapi kecepatan spindle hingga 2.500 RPM dan dudukan alat 12 posisi. Ideal untuk operasi pembubutan presisi dan tugas berat. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Ncedpfx Adjx D Dwreijw Pembubutan

Tahun pembuatan: 1998, Kondisi: siap digunakan (bekas), Data Umum Lebar pengukuran: 2620 mm Kedalaman pengukuran: 4865 mm Berat mesin: 11700 kg Unit Kontrol Merek: OKUMA Model: n/a Penggerak Utama Rentang kecepatan spindle: 3500 Nsdpfx Adox D R Rfoijcw Taper alat: ASA 8 Jumlah sumbu: 2 Pergerakan Pergerakan sumbu X: 230 mm Pergerakan sumbu Z: 670 mm Revolver Taper alat: VDI 40 Okuma LB 25 II-M 3-sumbu ini diproduksi pada tahun 1998. Ini adalah mesin bubut horizontal yang kokoh dengan sistem kontrol Okuma OSP 5020L, menawarkan kecepatan spindle 3.500 rpm dan revolver alat 12 posisi. Dapat menangani diameter kerja maksimal Ø 420 mm dan panjang hingga 1.250 mm. Manfaatkan kesempatan untuk membeli mesin bubut horizontal Okuma LB 25 II-M ini. Hubungi kami untuk informasi lebih lanjut tentang mesin ini. Jenis Aplikasi Pembubutan

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, jam operasional: 20.204 h, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 1.025 mm, diameter pembubutan: 530 mm, jarak pergerakan sumbu X: 475 mm, jarak gerak sumbu Z: 1.170 mm, gores kuas bulu: 150 mm, model controller: Okuma OSP-E100L, TECHNICAL DETAILS Distance between centres: 1,000 mm Swing diameter over bed: 550 mm Maximum machining diameter: 530 mm Maximum workpiece length: 1,025 mm Travel X-axis: 475 mm Y-axis: ±80 mm Z-axis: 1,170 mm C-axis: 360° (continuous) B-axis indexing angle: 1° Main spindle Spindle speed: 5,000 rpm Spindle nose: JIS A2-6 Taper bore diameter: 62 mm Bearing diameter: 100 mm Njdpfxjxvzp Ae Adiecw Sub-spindle Spindle speed: 6,000 rpm Spindle nose diameter: 140 mm Taper bore diameter: 43 mm Bearing diameter: 80 mm Milling spindle Speed range: 6,000 rpm Feed Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 26 m/min Rapid traverse Z-axis: 40 m/min Tool changer (ATC) Number of tools: 84 Maximum tool length: 250 mm Maximum tool diameter: Ø120 mm (adjacent pockets free) Maximum tool weight: 5 kg MACHINE DETAILS Control: Okuma OSP-U100L Dimensions (L x W x H): 3,820 × 2,645 × 2,900 mm Weight (without tool magazine): 12,500 kg Main switch on-time: 20,204 h EQUIPMENT Automatic tool changer system High-speed M-spindle with coolant supply 360° C-axis for continuous machining Robust B-axis with 1° indexing Precision sub-spindle for secondary machining Sturdy turret with ATC system

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, kecepatan spindel (maks.): 5.000 rpm, jarak lintasan sumbu Y: 120 mm, daya motor spindle: 22.000 W, jumlah sumbu: 4, This 4-axis Okuma LB 3000 EXII was manufactured in 2022. It features a spindle speed of 5,000 rpm and a spindle power of 22 kW. The machine is equipped with a motorized turret with 12 positions and a Y-axis travel of 120 mm. If you are looking for a high-quality lathe, you should consider the Okuma LB 3000 EXII horizontal lathe we have for sale. Contact us for further details. • Control: OSP P 300LA • Spindle: ASA 6" nose (bore 80 mm, without drawbar); bar capacity 52 mm (Kitagawa SR1453 cylinder); electric spindle orientation • Axes: Y-axis travel 120 mm; C-axis rotation 360° (0.001° increment) • Turret: 12-position radial, motorized; turret motor 6,000 rpm, 7.1 kW • Tailstock: MT5; 500 kgf thrust; live center • Pedals: Separate for spindle and tailstock • High-pressure coolant pump: 0.8 kW; 6 bar; 20 l/min • Tool presetting: Manual Nodpfx Aeyq Ngmediscw • Programming: Plain language IGF dialog