Beli Okuma Multus B400 bekas (216)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, panjang pembubutan: 995 mm, lubang spindel: 80 mm, 001 Kjdpsx I Nbtefx Ahhslt

Kondisi: baik (bekas), Tahun pembuatan: 2007, panjang pembubutan: 1.065 mm, diameter pembubutan: 470 mm, Chip conveyor Klodpfx Aewq Rpwehhst SMW 315 3-jaw chuck 2 x radial live tool holders 2 x axial live tool holders Spindle bore: 80 mm BMT tooling system Tool setting probe Spindle hours: 6960 / 6270 operating hours Max. turning diameter: 470 mm X-axis travel: 260 mm Z-axis travel: 1065 mm Spindle bore: 80 mm Spindle speed: 4200 rpm Spindle power: 30 kW Tool changer: 12-position BMT tool system Driven tool speed: 6000 rpm Driven tool power: 7.1 kW Length: 3310 mm Width: 1900 mm Height: 1970 mm Weight: 6100 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, panjang pembubutan: 700 mm, jarak pergerakan sumbu X: 205 mm, jarak gerak sumbu Z: 700 mm, daya motor spindle: 22.000 W, tinggi total: 2.800 mm, panjang total: 6.000 mm, lebar total: 3.900 mm, berat keseluruhan: 9.800 kg, Complete machining with twin spindle, upper and lower turret Kitagawa 3-jaw chuck left and right Tool holders with driven tools, both axial and radial Large jaw cabinet with inserts OGL gantry loader with approx. 10 kg payload Chip conveyor Paper band filter system with pressure tank Max. turning diameter: 400 mm X-axis: 205 mm Z-axis: 700 mm Spindle bore: 62 mm Spindle speed: 6000 rpm Spindle power: 22 kW Counter spindle speed: 6000 rpm Ksdpfx Asyn Em Rjhhelt Counter spindle through-hole: 62 mm Counter spindle power: 15 kW Tool changer: 16 positions Speed of driven tools: 6000 rpm Positions lower turret: 16 Driven tool speed: 6000 rpm Driven tool power: 7 kW Chip conveyor: yes Tool Eye: yes Length: 6000 mm Width: 3900 mm Height: 2800 mm Weight: 9800 kg Please note: The information on this page has been provided to the best of our knowledge, and wherever possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, neither representation nor contract terms are implied. We recommend verifying all important details.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, kecepatan spindel (maks.): 4.500 rpm, jarak pergerakan sumbu X: 210 mm, jarak gerak sumbu Z: 380 mm, produsen pengendali: OKUMA, model controller: OSP‑P200LA‑R, jumlah sumbu: 3, This 3-axis Okuma GENOS L200E-M was manufactured in 2011. It features a maximum turning diameter of 200 mm and a Z-axis travel of 380 mm. The machine is equipped with a 12-station turret with live tooling, enabling milling and drilling on the C-axis. If you are looking for high-quality turning capabilities, consider the Okuma GENOS L200E-M horizontal turning center we are offering for sale. Contact us for further details. • Turning configuration: 2 axes (X, Z) + C-axis; no Y-axis • Tailstock: Equipped • Tool presetter: Automatic tool presetter installed • Turret: 12-station turret with live tooling (milling and drilling on the C-axis) • Max. turning diameter: 200 mm • Spindle nose: ASA A2-6 • Spindle bore diameter: approx. 50 mm • Electrical connection: 380 V, 3 phase, 50/60 Hz • Average apparent power: 17.7 kVA • Full load current: 26.7 A • Max. motor current draw: 45 A Kedpfx Aey Rrwvohhslt Technical Specification Counter spindle: No Driven tools: No

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 560 mm, jarak lintasan sumbu Y: 610 mm, jarak gerak sumbu Z: 625 mm, Type of machine: Horizontal Machining Center Manufacturer: OKUMA Model: MA-400HA Year of manufacture: 2008 Control: OSP P200M Country of origin: Japan Delivery time: Short-term by arrangement 4-axis machining center with high productivity including various accessories Machine Equipment - ConSep chip conveyor system with high-pressure coolant pump - Various software packages - Touch setter with length measurement and breakage control - Work area rinsing system Technical Details - Travel distances - axes: X-axis (column right-left): 560 mm Z-axis (table front-back): 625 mm Y-axis (spindle up-down): 610 mm B-axis: 1°, 0 - 360° - Number of pallets: 2 (automatic pallet changer for 2 pallets) - Pallet size (mm): 400 x 400 - Max. pallet load (kg): 400 - Max. pallet workpiece dimension (mm): 500/600 x 710 - Spindle speed (rpm): 15,000 - Main spindle (10min/cont): 22/18.5 kW - Tool holder: BT40 - Tool magazine: 60 positions Optional - Organization and execution of transport - Machine installation placement - Machine commissioning Kledpfx Ahjy Tvrvjhst

Kondisi: bekas, Tahun pembuatan: 2000, de-to-hu Klsdpfx Ahey Rakkohot

Kondisi: bekas, Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 450 mm, panjang pembubutan: 500 mm, diameter pembubutan: 300 mm, lubang spindel: 75 mm, kecepatan spindel (maks.): 3.800 rpm, kecepatan spindel (min.): 70 rpm, jarak pergerakan sumbu X: 400 mm, jarak gerak sumbu Z: 500 mm, daya motor spindle: 11.000 W, gerak cepat sumbu X: 12 m/menit, pergerakan cepat sumbu Z: 12 m/menit, kecepatan rotasi (min.): 70 rpm, kecepatan rotasi (maks.): 3.800 rpm, tinggi total: 1.800 mm, panjang total: 3.900 mm, lebar total: 1.800 mm, A robust and proven Okuma CNC lathe, model LB15, with integrated Okuma robot and automatic material feed is being offered for sale. This machine is ideally suited for automated serial production, impressing with its high reliability and rigid construction. The lathe is in working condition and can be inspected under power by appointment. Technical specifications: * CNC control: OSP 5000L-G CNC system (German interface) * Data transfer: RS232 Klsdpsy Tp D Ssfx Ahhst * Turret: 12 positions * Spindle speed: 70–3800 rpm * Spindle power: 11 kW (30 min) / 7.5 kW continuous duty * Spindle bore: Ø 75 mm * X-axis travel: 400 mm * Z-axis travel: 500 mm * XZ feed rate: 12,000 mm/min * Power supply: 3 × 400 V * Rated machine power: 21 kVA * Max. load current: 36 A * Machine dimensions: approx. 2.9 m length approx. 3.9 m with chip conveyor approx. 1.8 m width approx. 1.72 m height * Machine weight: approx. 4,500 kg Equipment: * Integrated Okuma robot * Automatic parts feed * Ideal for series and automatic turned parts * Rigid and durable design Particularly interesting for: * Series production * Lights-out/manless manufacturing * Automatic turned parts * Production expansion or export Loading and transport can be organised. Price: negotiable, plus VAT. Location: Germany Please contact us if interested. All information is non-binding, prior sale reserved. Machines/parts are sold without warranty and remain our property until full payment has been received.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, kecepatan spindel (maks.): 3.800 rpm, jarak pergerakan sumbu X: 280 mm, jarak gerak sumbu Z: 500 mm, daya motor spindle: 22.000 W, jumlah sumbu: 5, The Okuma LB 300M X 500 5-axis lathe was manufactured in 2012. It offers a maximum turning diameter of 340 mm and a turning length of 480 mm. This machine is equipped with a powerful spindle speed range from 45 to 3,800 rpm and a robust 12-station turret. If you are searching for a high-quality lathe, the Okuma LB 300M X 500 horizontal lathe we offer for sale is worth considering. Please contact us for further details. • CNC control: OSP U100L • Maximum turning diameter: 340 mm • Maximum turning length: 480 mm • Distance between centers: 500 mm • C-axis: 360° (0.001° increments) • Rapid traverse: X 20,000 mm/min; Z 25,000 mm/min • Spindle nose: ASA 6 • Bar capacity: 65 mm • Driven tools: 45-4,500 rpm; 3.3 kW • Turret: V 12 NCM (12 stations); VDI 40 • Tool cross-section: 25 mm (square) / 40 mm (boring bar) • Tailstock: quill Ø 90 mm; stroke 120 mm; taper MT5 • Certification: CE-certified with manuals Additional Equipment • Kitagawa B208 chuck • Chip conveyor • High-pressure coolant pump • Robot interface • Automatic door • Air blower • Toolholder • 4 radially driven tools • 4 axially driven tools Klsdoy N Sabepfx Ahhst Technical Specification Taper size: VDI 40 Counter spindle: No Driven tools: Yes

Kondisi: hampir baru (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, * Okuma LB 3000 MY. * Included equipment valued at €18,000–20,000. * 4-axis machine. * Fully independent programmable tailstock, movable along Z-axis and clamped using M-codes. * 12-station turret, all positions powered. * C-axis. * Y-axis. * Integrated main spindle motor: 18.5 / 22 kW. * Driven tool motor: 5.5 kW. * Motor starting torque: 620 N·m. * Direct drive motor without belts or gear stages. * Main spindle nose size: A2-8. * Tailstock with Morse taper MT5. * Bar capacity: 75 mm. * Spindle chuck: Kitagawa B-210. * Box guideways on all axes. * Main spindle speed: 4,200 rpm. * Driven tool speed: 4,000 rpm. * Swing diameter: 520 mm. * Max turning diameter: 380 mm. * Max machining length: 1,050 mm. * Spindle head oil cooler. * Data communication ports: USB, PCMCIA card, and RS232. * Automatic torque and tool voltage control. * IGF OSP P200-L conversational automatic programming system. * Automatic load control and tool consumption monitor. * Parametric collision avoidance system for tools. * Tool life management and monitoring system. * Rapid traverse speeds: 20 m/min (X-axis), 25 m/min (Z-axis). Kledpfx Ajy T E Nwohhot * Turret indexing time: 0.2 seconds. * Renishaw automatic tool measurement arm. * Dual foot pedal for main chuck and tailstock open/close. * Side-mounted hinged belt chip conveyor. * Complete set of external and internal static toolholders. * Full set of axial and radial powered toolholders. * Electrical transformer. * Documentation, parts list, electrical schematics, programming and operation manual. * Weight: 6,200 kg. * Machine currently in operation. * Immediate delivery unless sold.

Kondisi: bekas, Tahun pembuatan: 2004, daya: 37 kW (50,31 hp), jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 950 mm, jarak gerak sumbu Z: 1.000 mm, produsen pengendali: Okuma, tinggi total: 3.280 mm, panjang total: 6.500 mm, lebar total: 3.460 mm, lebar meja: 630 mm, model controller: OSP-E100M, kecepatan spindel (min.): 12.000 rpm, tinggi meja: 630 mm, Okuma MA-600 HB Space Center Control: OSP E 100M Klsdpfx Ahey N Afushst Pallet dimensions: 630 x 630 mm Number of pallets: 2 Travel X-axis: 1000 mm Travel Y-axis: 950 mm Travel Z-axis: 1000 mm Table indexing: 1° Spindle taper: MAS BT 50 Spindle speed: 12,000 rpm Spindle motor: 37/26 kW Tool magazine capacity: 60 positions If you have any questions about the machine or wish to schedule a viewing appointment, please contact us by phone or email. Feel free to browse our other listings to get a complete overview of our current stock.

Kondisi: siap digunakan (bekas), Okuma BDU-30A Brushless Servomotor Drive Unit dengan E4809-045-061-D, nomor seri sesuai foto, bekas, terdapat bekas pemakaian normal, 100% berfungsi dengan baik. Kodpfxsi D Naaj Ahholt

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, jarak pergerakan sumbu X: 260 mm, jarak gerak sumbu Z: 1.020 mm, produsen pengendali: OKUMA, jumlah sumbu: 4, This 4-axis Okuma LU15 M-2SC 1000 was manufactured in 1998. It features two tool turrets, driven tools with C-axis capability, and synchronized thread cutting for enhanced productivity. The machine is equipped with an integrated tool setter for precise measurements and a programmable tailstock for increased versatility. If you are looking for a high-quality lathe, consider the Okuma LU15 M-2SC 1000 horizontal turning center we offer for sale. Contact us for further details. • Longitudinal travel (X): 1020 / 995 mm • Cross travel (Z): 260 / 140 mm Klsdpfsy Nmi Dex Ahhjt • Turning diameter: 340 mm • Swing diameter over bed cover: 530 mm • Swing diameter over cross slide: 380 mm • Spindle nose: ASA-A2 / DIN 55026 size 6 • Spindle bore: 62 mm • Spindle bearing diameter (front): 100 mm • Chuck diameter: 200 mm • Main drive: Motor spindle (hollow shaft motor), frequency controlled, 60% duty cycle • Power (main drive): 22 kW • Maximum torque: 412 Nm • Speed range: 45 - 4,500 rpm • Speed ranges (electrical): 2 • Feed drive: AC servo motors, digitally controlled • Feed range X/Z: 0 - 1,000 mm/rev • Rapid traverse X/Z: 15 / 20 m/min • Power X, Z: 2.4/1.5 kW and 4/4 kW • Feed force X, Z: 11/3.7 kN and 7/6.7 kN • Turret: 2 tool turrets • Driven tools: Yes (C-axis and driven units) • Thread cutting: Synchronized thread cutting • Spindle interpolation: Automatic main spindle interpolation • Tool monitoring: Wear and breakage monitoring • Tool measurement: Integrated tool presetter / measuring device • Tailstock: Programmable, traversable with bed slide, automatic clamping • Tailstock quill: Controllable via M-command • Draw tube bore: 55 mm (partial hollow clamping cylinder) • Interface: DNC interface RS-232C • Coolant system: Enhanced pump (8 bar at 30 l/min) • Programming: ONE TOUCH Dialog-NC (automatic job planning) Additional Equipment: • Chip conveyor (1,200 mm discharge height) Technical Specification Counter Spindle: No Driven Tools: Yes

Kondisi: bekas, Tahun pembuatan: 2014, Detail teknis: Perjalanan x: 760 mm Perjalanan y: 760 mm Perjalanan z: 760 mm Kebutuhan daya total: 43 kW Berat mesin ±: 11,5 t Kebutuhan ruang ±: 2,7 x 4,73 x 2,87 m Ksdpoxrwpdofx Ahhjlt Beban maksimum pada meja: 500 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jarak pergerakan sumbu X: 1.500 mm, jarak lintasan sumbu Y: 660 mm, jarak gerak sumbu Z: 660 mm, produsen pengendali: OKUMA, model controller: OSP-P300M, beban meja: 1.500 kg, berat keseluruhan: 9.000 kg, kecepatan spindel (maks.): 15.000 rpm, daya motor spindle: 30.000 W, jumlah slot dalam magazin alat: 32, jumlah sumbu: 3, Okuma MB-66VA 3-sumbu ini diproduksi pada tahun 2013. Mesin ini memiliki panjang lintasan sumbu X 1500 mm, lintasan sumbu Y 660 mm, dan lintasan sumbu Z 660 mm. Mesin ini dilengkapi dengan spindle bertenaga 30 kW yang mampu mencapai kecepatan hingga 15.000 rpm, serta memiliki majalah alat dengan 32 posisi. Jika Anda mencari solusi machining berkualitas tinggi, pertimbangkan pusat pemesinan vertikal Okuma MB-66VA yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut. • Ukuran meja: 1500 × 660 mm Kjdpfx Ahey Ndp Iohelt Spesifikasi Teknis Ukuran Taper BT 50

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jam operasional: 23.563 h, jarak pergerakan sumbu X: 1.050 mm, jarak lintasan sumbu Y: 560 mm, jarak gerak sumbu Z: 460 mm, produsen pengendali: OKUMA, model controller: OSP-P300M, beban meja: 900 kg, berat keseluruhan: 7.000 kg, kecepatan spindel (maks.): 15.000 rpm, daya motor spindle: 22.000 W, jumlah slot dalam magazin alat: 32, jumlah sumbu: 3, Okuma M560-V 3-sumbu ini diproduksi pada tahun 2016. Mesin ini memiliki perjalanan sumbu X yang luas sebesar 1050 mm, perjalanan sumbu Y 560 mm, dan perjalanan sumbu Z 460 mm. Mesin ini dilengkapi dengan spindel bertenaga 22 kW dan majalah alat untuk 32 alat. Jika Anda mencari solusi pemesinan berkualitas tinggi, pusat pemesinan vertikal Okuma M560-V yang kami tawarkan untuk dijual patut dipertimbangkan. Hubungi kami untuk informasi lebih lanjut. • Ukuran meja: 1300 × 560 mm Kjdpfsy Nb T Djx Ahhjlt

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jarak pergerakan sumbu X: 762 mm, jarak lintasan sumbu Y: 460 mm, jarak gerak sumbu Z: 460 mm, produsen pengendali: OKUMA, model controller: OSP-P200M, beban meja: 800 kg, berat keseluruhan: 6.000 kg, kecepatan spindel (maks.): 15.000 rpm, daya motor spindle: 15.000 W, jumlah slot dalam magazin alat: 20, jumlah sumbu: 3, Pusat pemesinan vertikal 3-sumbu Okuma M460R-VE ini diproduksi pada tahun 2013. Mesin ini memiliki perjalanan sumbu-X yang kokoh sepanjang 762 mm, perjalanan sumbu-Y 460 mm, dan perjalanan sumbu-Z 460 mm. Mesin dilengkapi dengan spindle bertenaga 15 kW yang mampu mencapai kecepatan hingga 15.000 rpm, serta memiliki magazin alat berkapasitas 20 posisi. Jika Anda mencari solusi pemesinan berkualitas tinggi, pertimbangkan mesin Okuma M460R-VE yang kami tawarkan untuk dijual. Hubungi kami untuk detail lebih lanjut. • Ukuran meja: 1000 × 460 mm Klsdpsy Nb Nxsfx Ahhet Spesifikasi Teknis Taper BT 40

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, jam operasional: 23.723 h, kecepatan spindel (maks.): 3.800 rpm, jarak pergerakan sumbu X: 235 mm, jarak gerak sumbu Z: 1.140 mm, daya motor spindle: 22.000 W, berat keseluruhan: 6.000 kg, produsen pengendali: OKUMA, model controller: OSP-P300, jumlah sumbu: 3, en Kodsy I Uu Ejpfx Ahhslt

Kondisi: bekas, Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, de-1 OKUMA CNC-Drehmaschine Modell LT2000EX-2M1Y mit OSP-P200LA CNC-Steuerung inkl. CE-Kennzeichnung 1 Satz 〈Europäische Standardausführung〉 1-1 Spindelmotor VAC 11/7,5 kW (5 min./Dauerlauf) 2 Stück 1-2 Spindeldrehzahl 50 - 6.000 min⁻¹ 2 Stück 1-3 Spindeldurchmesser 62/100 mm, 140 Flachaufnahme 2 Stück 1-4 C-Achsen-Steuerung, 360° in 0,001°-Schritten 2 Stück 1-5 Y-Achse 95 mm (+50 bis -45) für oberen Revolver 1 Stück 1-6 Oberer V16 (Drehen & Fräsen) + Unterer V16 (Drehen & Fräsen) Radialrevolver (ohne Werkzeughalter) 1 Stück 1-7 Antriebsmotor für angetriebene Werkzeuge, PREX 5,5/3,7 kW (2 min/Dauerlauf) 2 Stück 1-8 Drehzahl angetriebene Werkzeuge 45–6.000 min⁻¹ 2 Stück 1-9 Kühlmittelversorgungssystem, 0,8 kW x 3 Pumpenmotoren 1 Satz 1-10 Arbeitsleuchte, Leuchtstofflampe 1 Stück 1-11 Komplett geschlossene Umhausung 1 Stück 1-12 Türverriegelung 1 Stück 1-13 Späneschublade, seitlicher Späneauswurf 1 Stück 1-14 Fundamentplatten und Nivellierschrauben 1 Satz 1-15 Maschinen-Hebehaken 1 Satz 1-16 Spannfutter automatisch öffnen/schließen mit Kontrollfunktion 2 Stück 1-17 Spannfutter-Luftdüsen 2 Stück 1-18 Schmierüberwachung B-1 1 Stück 1-19 CE-Kennzeichen und EMV 1 Stück 1-20 IEC-Norm-Konformität 1 Stück 1-21 Doppelpedal für Spannfutterbetrieb 2 Stück 1-22 Synchrongewindeschneiden (für LT2000EX-M) für Frässpindel 1 Stück 1-23 OSP-P200LA CNC-Steuerung mit 15" Farbdisplay, Touchpanel 1 Stück 1-24 OSP-P200LA 3D-M-E Kit-Spezifikationen 1 Satz Klsdpjy Rnbdsfx Ahhjt *Multitasking-Maschinen Koordinatenumrechnung (1 Satz) *Multitasking-Maschinen Profilerstellung (1 Satz) *Programmspeicher Standard: 2GB (1 Satz) *Operationspuffer Standard: 2MB (1 Satz) *Echtzeit-3D-Simulation (1 Satz) *Zykluszeit-Überwachung (1 Satz) *Lastüberwachung (Spindel, Vorschubachsen) (1 Satz) *NC-Betriebsüberwachung (inkl. Zähler- und Überwachungsfunktionen) (1 Satz) *Zykluszeitreduktion (1 Satz) *Variable Spindeldrehzahlregelung (1 Satz) 1-25 Teilungsfehlerkompensation X + Ys + Z 1 Stück 1-26 Umschaltbarkeit Zoll/Metric 1 Stück 1-27 Auswurfkontrolle Werkstück 1 Stück 1-28 Statusanzeigelampe (2-fach) anstelle der Anzeige im 3D-E-Kit 1 Stück 1-29 Stromversorgungsanpassung für jeweilige Landesnetze (CE-Transformator) 1 Stück 1-30 Spannfutter öffnen/schließen während Spindeldrehung (LT-Standard) 1 Stück 1 Satz Werkzeuge – siehe letztes Foto

Kondisi: bekas, Tahun pembuatan: 1994, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0607.1447, diameter putar di atas sled silang: 340 mm, panjang pembubutan: 520 mm, diameter pembubutan: 530 mm, lubang spindel: 62 mm, kecepatan spindel (maks.): 4.500 rpm, kecepatan spindel (min.): 45 rpm, jarak lintasan sumbu Y: 260 mm, jarak gerak sumbu Z: 520 mm, daya motor spindle: 15.000 W, pergeseran cepat sumbu Y: 15 m/menit, pergerakan cepat sumbu Z: 20 m/menit, tinggi total: 1.750 mm, panjang total: 3.000 mm, lebar total: 1.700 mm, jenis arus masuk: tiga fasa, berat keseluruhan: 5.000 kg, Perlengkapan: dokumentasi / manual, Kontrol OKUMA OSP5020L 12 perkakas Klsdsy Stxqopfx Ahhot Pengeluaran serbuk otomatis

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, jam operasional: 521 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: L3M0474, panjang pembubutan: 500 mm, diameter pembubutan: 300 mm, tinggi total: 2.210 mm, panjang total: 3.950 mm, lebar total: 2.260 mm, berat keseluruhan: 5.680 kg, Perlengkapan: dokumentasi / manual, mesin bubut Okuma bekas Kondisi seperti baru, terawat dengan baik Klodsy Rx Tdjpfx Ahhet 521 jam operasi 347 jam kerja spindle

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, LT-2512 Manufacturer: Okuma Model: LVT300-M Control: Okuma OSP-P200L Year of manufacture: 2007 Keyboard/Software language: International / Spanish Country of origin: Japan Technical Specifications: Capacity: Swing over bed: Ø 280 mm Swing over Z carriage: Ø 280 mm Swing over X carriage: Ø 280 mm Max. turning diameter x length: Ø 280 x 200 mm Main Spindle: Spindle diameter: Ø 100 mm Spindle nose (type): JIS A2-6 Spindle bore diameter: Ø 62 mm Speed ranges: 2 ranges, stepless speed variation Ksdpfxsy Smz Ee Ahhslt Spindle speed: 40 – 4,000 rpm Motor: 22/15 kW (20 min/continuous), VAC type X Axis: Travel: 210 mm + 845 mm (for workpiece loading) Cutting feed: 0.001 – 1,000.00 mm/rev Rapid traverse: 60,000 mm/min Z Axis: Travel: 360 mm Cutting feed: 0.001 – 1,000.00 mm/rev Rapid traverse: 30,000 mm/min Turret: Type: VDI 40 Number of tools: 12 (L or M) Tool dimensions External turning: 25 x 25 mm Internal turning: Ø 40 mm Live Tooling: Rotational speed: 45 – 4,500 rpm Speed ranges: 1 range, stepless speed variation Motor: 3.7/2.2 kW (15 min/continuous) C Axis: Controlled angle: 360° (0.001° increments) Rapid traverse: 200 rev/min Dimensions and weights: Machine height: 2,500 mm Floor space required: 1,320 x 2,800 mm Machine weight: 5,600 kg Included options: EWAB palletized conveyor (pallets not included) MAYFRAN chip conveyor FORKARDT 3QLC 200-54 hydraulic chuck (3 jaws / 210 mm) Tool measurement sensor (TOUCH SETTER) Tool Life Management function Rigid tapping DNC-T1

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 100277, diameter pembubutan: 340 mm, kecepatan spindel (maks.): 4.500 rpm, jarak pergerakan sumbu X: 280 mm, jarak lintasan sumbu Y: 120 mm, jarak gerak sumbu Z: 500 mm, RINCIAN TEKNIS Sumbu X: 280 mm Sumbu Y: 120 mm Sumbu Z: 500 mm Sumbu C: 360° (0,0001) Klsdpfox I Axrsx Ahhjt Kecepatan spindle: 4.500 rpm Diameter lubang spindle: 62 mm Diameter chuck: 10 inci RINCIAN MESIN Kontrol: OSP U 100 L Berat: 6.000 kg PERLENGKAPAN Perkakas bertenaga Konveyor serbuk Trafo Manual

Kondisi: sangat baik (bekas), OSP_P200M_DE Klodpfxey Hqv Ne Ahhjt

Kondisi: baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: fungsi terbatas, jarak pergerakan sumbu X: 560 mm, jarak lintasan sumbu Y: 610 mm, jarak gerak sumbu Z: 625 mm, gerak cepat sumbu X: 60 m/menit, pergeseran cepat sumbu Y: 60 m/menit, pergerakan cepat sumbu Z: 60 m/menit, produsen pengendali: Okuma, model controller: OSP-E100M, panjang benda kerja (maks.): 600 mm, lebar benda kerja (maks.): 710 mm, berat benda kerja (maks.): 400 kg, tinggi total: 2.760 mm, panjang total: 4.535 mm, lebar total: 2.415 mm, lebar meja: 400 mm, panjang meja: 400 mm, beban meja: 400 kg, berat keseluruhan: 10.000 kg, kecepatan spindel (maks.): 8.000 rpm, jarak dari tengah meja ke hidung spindel: 710 mm, daya motor spindle: 15.000 W, hidung spindel: BT40, jumlah spindel: 1, jumlah slot dalam magazin alat: 40, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, de-001 Kledpfjwcd Evox Ahhot

Kondisi: bekas, Detail teknis: Diameter putar di atas tempat tidur: 460 mm Diameter putar di atas support: 350 mm Panjang putar: 1500 mm Tinggi pusat: 250 mm Lubang spindle kerja: 52 mm Kisaran kecepatan putar: 35 -1800 rpm Gerakan pinol kepala lepas: 230 mm Morse taper kepala lepas: MK4 Berat mesin sekitar: 2,7 t Klsdpfx Ahswa Nwfjhst Dimensi mesin (PxLxT): 2,88 x 1,2 x 1,5 m Pompa pendingin dengan suplai hingga katup manual Aksesori: Steady rest D=130mm tertutup Chuck 3 rahang D=315mm dari Forkhardt F315