Beli Pas Pusat bekas (7.972)

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2010, • Travel range: X = 3,100 mm, Y = 1,950 mm, Z = 1,390 mm • Heidenhain iTNC 530 with HR 410 handwheel • Machine table for multi-sided machining, 3,000 mm x 1,600 mm • 2-axis NC universal drilling and milling head, suitable for simultaneous and positioning operation • Spindle: 10,000 rpm, HSK 100 interface, 130 Nm spindle torque • Tool changer system: HSK 100 / 40 pockets for tools up to 750 mm in length • Chip augers in X-axis for optimal chip evacuation • Chip conveyor (scraper type) for cross transport, manufacturer: Knoll • Coolant supply, 900 L, manufacturer: Knoll • External air • ICS (internal coolant supply) 60 bar for deep hole machining • Full enclosure with safety glass panels, open at the top for optimized crane loading • Split sliding doors at the front • Split sliding doors at the operator side • Wireless probe RMP 60 • Including wash gun • Including platforms at loading and operator sides • Completely factory overhauled and newly painted • Short delivery time upon agreement, subject to prior sale • Used machine • Y-axis ball screw replaced including bearings in September 2021 • X-axis linear guide and carriages replaced in July 2023 • Milling spindle overhauled in May 2023 (new clamping set, new clamping cartridge, new rotary union, general inspection) (23,105 spindle hours) • Under power for inspection in 72793 Pfullingen • Optional: leveling shoes • Optional: commissioning/installation Kdjdpfxox U Sfns Aa Njg • Optional: transport • Total spindle hours: 23,122 • Total machine hours: 53,991 • Year of manufacture: 2010 Subject to prior sale

Kondisi: baik (bekas), Tahun pembuatan: 2007, en Kodpfx Aaoyak Hao Nsdg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, Pusat pemesinan simultan 5-sumbu. Perjalanan sumbu: X 900 mm, Y 850 mm, Z 700 mm. Kecepatan maksimum: 18.000 rpm. Tempat alat: 80. Kontrol Heidenhain. Kedpfsyabkpox Aa Nedg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, BAZ 5-sumbu Kontrol: Heidenhain Perjalanan sumbu: X 2000 mm, Y 600 mm, Z = H 800 mm, V 700 mm. Berat penjepitan maksimum meja putar: 1200 kg Kjdpeyaba Dofx Aa Nsdg Kecepatan maksimum: 18.000 rpm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, 1.) Ruang kerja 500x552x300 Ksdpfx Aeyaa Umsa Njdg 2.) Berat benda kerja maks.: 400 kg 3.) Spindel frais 42.000 rpm 3.) Penukar alat 42 posisi 4.) Sistem pemandu hidrostatis di semua sumbu 5.) Penggerak motor linier 6.) Kontrol: Röders RMS6 7.) Berat mesin sekitar 10.000 kg 8.) Kebutuhan ruang 3015x2510x2750

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Pusat Pemesinan 5 Sumbu Simultan Tahun pembuatan: 2016 Kontrol asli Röders 1.) Area kerja: 1000X1050X600 mm 2.) Berat benda kerja maksimum: 800 kg 3.) Spindel milling: 32.000 rpm 3.) Penukar alat: 30 posisi 4.) Sistem pemandu hidrostatik di semua sumbu Kdjdpeyaa T Nofx Aa Njg 5.) Penggerak motor linier 6.) Mesin 5 sumbu, rentang ayun sumbu A: ±115°, rotasi sumbu C: 360° 7.) Kontrol: Röders RMS6 5.52 8.) Berat mesin sekitar 21.000 kg 9.) Kebutuhan ruang: 3500X5500X3600 mm dengan sistem ekstraksi debu

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Spesifikasi: X/Y: 110 m/menit Z: 20 m/menit Area Kerja X: 3250 mm Y: 1400 mm (Jalur 1600 mm) Kdodpeyar Rtjfx Aa Neg Z: 125 mm + 100 mm untuk pod vakum 21 spindel bor vertikal 6 bor horizontal arah X 4 bor horizontal arah Y Gergaji alur dapat diputar di arah X & Y Spindel utama routing 10/12 kW Tumpuan torsi untuk membawa agregat (agregat tidak dapat diputar) Penukar alat 8 posisi berjalan pada tumpuan di arah X & Y (tidak cocok untuk agregat) Penukar alat linier 2 posisi cocok untuk agregat Urutan proses pengeboran/pemotongan yang dioptimalkan Pin Laser untuk posisi pod vakum Pelumasan sentral otomatis Paket kualitas Weeke Mode hemat energi 400V 50Hz CE

Tahun pembuatan: 1996, Kondisi: bekas, clwz0fnyt0002ma01j1b3dnfo Kdjdpsyacptsfx Aa Nog

Kondisi: bekas, Tahun pembuatan: 2005, 3f7d840f Kdjdpfxow Eyg Is Aa Njg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, First MCV 2000 - Pusat Pemesinan Vertikal dengan kontrol Fanuc 0i - berfungsi penuh dan dalam kondisi menyala Spesifikasi: Dimensi meja: 2200 x 1000 mm Perjalanan sumbu X: 2050 mm Perjalanan sumbu Y: 1150 mm Perjalanan sumbu Z: 760 mm Kjdpem E Ttxofx Aa Njdg Kecepatan spindle: 12.000 rpm Kecepatan pemakanan kerja: 8.000 mm/menit Kecepatan rapat sumbu Z: 15 m/menit Kecepatan rapat sumbu X - Y: 20 m/menit Mesin tersedia di stok, pengiriman cepat

Kondisi: bekas, Pusat Perkakas Horizontal Kitamura HX500G Spesifikasi Teknis Utama: Kjdem E Ttbspfx Aa Njdg Kecepatan Maks. Spindel: 12.000 RPM Diameter Maks. alat: 125 mm Berat Maks. alat: 20 kg Luas meja kerja: 630x630 mm Ukuran kerja maks.: 1000x1000 mm Kapasitas beban meja: 1.200 kg Sumbu X: 1.050 mm Sumbu Y: 850 mm Sumbu Z: 900 mm Jarak nose spindle ke meja: 130 - 1030 mm Tersedia. Pengiriman cepat.

Kondisi: perlu perbaikan (bekas), Pusat pemesinan Hyundai SPT-V30T dengan pergantian alat otomatis. Menyala, tetapi tidak berjalan, terjadi kesalahan servo. Dijual untuk perbaikan atau sebagai suku cadang. Jika Anda memiliki pertanyaan lebih lanjut, kami dengan senang hati akan menjawabnya. Kdsdpfx Aajx S I Iae Njg

Kondisi: Pembawa suku cadang rusak (bekas), Pusat pemesinan CNDN CK6140, tidak berfungsi, telah dibongkar, suku cadang baru telah dibuat, namun belum dirakit kembali. Kami menjualnya dalam kondisi tidak berfungsi, dapat dirakit ulang atau digunakan sebagai suku cadang. Kdedpfx Aaox S I Dbs Njg Jika Anda memiliki pertanyaan lebih lanjut, kami siap membantu.

Tahun pembuatan: 2007, jam operasional: 8.500 h, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Vertical Machining Center Emco FAMUP MCX 750-1200 with 40 bar Through-Spindle Coolant Year of manufacture: 2007 Control: Fanuc 21i Operating hours: 8,500h Chip Blaster high-pressure system - Max. spindle speed 8,000 rpm • Tool magazine with 24 magazine slots (ISO 40) • Tool holder ISO 40 - 24 draw bars ISO 40 • Standard paint: Red – Grey – Black • Spindle prepared for high-pressure cooling (Connection A) • Tapping without compensating chuck • Central lubrication system • Chip removal from enclosure via flushing device • Cleaning pistol for work area, clamping devices, parts • Coolant system with 3 adjustable nozzles • Coolant tank 500 l • Spindle air blast device for cleaning the taper during tool change • Work area illumination with 24 V halogen lamp • Two-color alarm lamp TECHNICAL DATA MCX 750 X-axis travel (longitudinal): 750 mm Y-axis travel (crosswise): 500 mm WORKING AREA Z-axis travel (vertical): 640 mm Clamping surface: 900 x 520 mm T-slots: Number, width, spacing 5x18x100 mm Max. table load: 400 kg TABLE Distance table surface – floor: 925 mm Speed range: 50 ÷ 8,000 rpm Spindle motor power: 13/9 kW Tool holder ISO 40 DIN 69871 Torque: 82.7/57.3 Nm SPINDLE Drive: Belt drive Rapid traverse X,Y,Z m/min: 24 Working feed X,Y,Z m/min: 20 AXIS DATA Kjdpfxjh Akhkj Aa Nodg Axis acceleration (X,Y,Z) G: 0.25 Unidirectional positioning accuracy across entire travel XYZ µm: ±8 Repeating precision X, Y, Z µm: ±8 PRECISION Reversal error µm: 5* Number of tool stations: 24 Tool selection: random Max. tool diameter with (without) adjacent tools ø: 75 (150) mm Max. tool length: 250 mm Max. tool weight: 6 kg TOOL CHANGE Tool change time (tool/tool): 1.5" Connected load: 20 kVA Dimensions LxWxH: 2,650 x 2,400 x 3,050 mm Weight: 5.5 t.

Kondisi: baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.135 mm, jarak lintasan sumbu Y: 865 mm, jarak gerak sumbu Z: 762 mm, produsen pengendali: Hurco, model controller: Winmax, lebar meja: 865 mm, panjang meja: 2.185 mm, berat keseluruhan: 17.500 kg, kecepatan spindel (maks.): 12.000 rpm, pasokan pendingin: 40 batang, Vertikal machining centre HURCO VMX 84 T40 Year of manufacture: 2010 Control: WinMax (Version 08.01.09.23 ST) Technical specifications: Drive power: 18 kW Spindle speed: 10 – 12,000 rpm Tool holder: SK 40 Number of tool magazine pockets: 40 Kdedpfx Aaov Sm Hvo Nsg Internal coolant supply (IKZ): 20 bar Travel distances: X-axis: 2,135 mm Y-axis: 865 mm Z-axis: 762 mm Equipment: - Chip conveyor - External coolant unit with 600-litre tank capacity - Spindle chiller

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, jam operasional: 1.600 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 650 mm, jarak gerak sumbu Z: 550 mm, kecepatan rotasi (maks.): 6.300 rpm, berat keseluruhan: 5.500 kg, kecepatan spindel (maks.): 6.300 rpm, Pusat Pemesinan Universal Deckel Maho DMU 80T Tahun pembuatan: 2000 Kontrol: Heidenhain Jam operasional: ~1.600 jam Data Teknis: Kecepatan spindle: 0 - 6.300 rpm Torsi spindle: Tipe dudukan alat: SK 40 Kdodpfjwq Dmcsx Aa Neg Jumlah tempat majalah: 24 Sumbu X: 800 mm Sumbu Y: 650 mm Sumbu Z: 550 mm Aksesori: - Unit pendingin pelumas (KSS) - 30 dudukan alat SK 40 - 1x ragum mesin Mesin dalam kondisi sangat baik dan hanya sedikit digunakan.

Kondisi: baru, Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, Stock machine "NEW" – available at short notice! (Subject to prior sale) Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine table: Table size: 950 x 550 mm Max. load: 800 kg T-slot width: 18 mm Number of T-slots: 3 T-slot spacing: 150 mm Travel ranges: Travel X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 - 700 mm Linear guides & speeds: Ball guides on X/Y axis Roller guides on Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate during milling: 0 – 10,000 mm/min Minimum increment: 0.001 mm Tool magazine (CAM-Type) / changer: Kdjdpfx Aasifn N Ns Njg Magazine capacity: 30 tools System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with free adjacent slots: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/cont.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant system incl. 300-liter tank and pumps External coolant around spindle Chip spirals right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling control panel Electronic handwheel (wired) Central lubrication oil/air Fully enclosed Work light Heat exchanger on control cabinet Auto power off function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE Declaration of Conformity per European directives Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required installation space: W3,160 x D3,000 x H3,000 mm (including chip conveyor discharge to the left) Machine weight: approx. 5,400 kg (net) Included special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/cont.): 18.5 / 15 kW, (FANUC motor) Tool magazine / changer: - Drum-type tool magazine with 30 slots, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC control), incl. wiring and Harting connector without axis driver Coolant, chip, and compressed air management: - Bed wash - Through-spindle coolant pump with 20 bar pressure, for direct-drive spindles - incl. cartridge filter - Belt-type chip conveyor incl. chip bin (chip discharge front to left machine side) Measuring and monitoring systems: - RENISHAW OMP-60 touch probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ tool laser measurement system and tool breakage control in the machine, incl. holder - Auto-door (side door) - Pneumatic interface for workpiece clamping - Included clamping devices as shown with RoboJob Mill Assist 25kg (Year 2025 - NEW) - Full enclosure - Double gripper Immediately available

Kondisi: baru, Tahun pembuatan: 2025, en-GB Ksdpfx Aajwkf Izj Nedg

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, with 8 pallets Control: Fanuc M-Pro1 (0i-MF Plus) Travel paths X/Y/Z: 800/800/860 mm Rapid traverse X/Y/Z: 74/74/74 m/min Pallet size: 500 x 500 mm Load capacity: 550 kg per pallet Workpiece size: Ø800 x H1,000 mm Tool holder: BBT 40 Number of magazine stations: 220 Max. tool diameter: Ø95 mm Max. tool diameter with adjacent positions empty: Ø185 mm Max. tool length: 400 mm Max. tool weight: 8 kg Spindle taper: BBT40 Big Plus™ Speed: 15,000 rpm Chip conveyors on both right and left sides in the machine Kodpfxsuafl Is Aa Njdg Coolant through the spindle Dual chip conveyor Full-featured 4th axis from PARKSON 50 kVA transformer

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter up to 220 mm, and a main spindle power of 35.5 kW. The machine is equipped with two high-performance spindles (66 mm bar capacity), two tool turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, as well as Y-axis functionality for both the upper and lower turrets. A 35-bar high-pressure coolant system with integrated filtration and an additional tank is also included. For further details, please refer to the attached brochure or contact us directly. Equipment: - LPS for left spindle - Reducing tube for left spindle - Hainbuch AXFIX 65 (standard) collet chuck 2703/0008 for left spindle - Hainbuch AXFIX 65 (standard) collet chuck 2703/0008 for right spindle - Tool presetter - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75 μm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75 μm filter - Coolant washing nozzle - TA/06000/10 coolant chiller with 8,000 W cooling capacity - Machine status indicator - Tool life management - Tool load monitoring - Programmable automatic parts catcher (pneumatic) - The workpiece removal unit is equipped with a gripper that opens and closes pneumatically for part extraction - Pneumatic ejector for the sub-spindle with 100 mm adjustable stroke; end position detected by sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Prepared for extraction system, connection flange Ø100 The machine comes with a chip conveyor, coolant unit, and tool package. It can be inspected under power and is available immediately. Operated in single-shift mode only. Kdsdpfx Asxmhdnea Njg Further information upon request.

Kondisi: baru, Tahun pembuatan: 2025, en Kdodpfx Aswxdpgja Neg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Pusat Pemesinan Vertikal (BAZ) dengan Y-Axis 1000 mm, ideal untuk pembuatan cetakan. Tahun pembuatan: 2010. Kontrol: Heidenhain iTNC 530. Ukuran meja: 2220 x 1000 mm. Kapasitas beban meja: 3000 kg. Perjalanan sumbu: X 2020 mm, Y 1000 mm, Z 800 mm. Daya spindle: 25 kW. Rapid traverse X/Y/Z: 16/16/12 m/menit. 4 conveyor spiral chip di samping sumbu Y. 4 panduan datar pada sumbu Y. Handwheel elektronik. Tapping tanpa floating chuck. Pelumasan sentral otomatis. Majalah alat dengan 40 slot dan pengambil ganda cepat. Taper ISO 50. Gearbox switching otomatis dengan pendingin oli dari ZF. Skala kaca pada semua sumbu. Pendingin tekanan tinggi melalui spindle 20 bar (IKZ). Filter pita kertas dengan tangki coolant terpisah 330 l. Berat mesin sekitar 19.000 kg. Mesin segera tersedia karena penutupan bisnis. Mesin dapat dilihat dalam kondisi aktif. Kdedpoxln A Isfx Aa Neg

Kondisi: baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, 1 Kjdpfx Aaex Auvvo Njdg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, jam operasional: 900 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 14-1332-015/23270, jarak pergerakan sumbu X: 3.200 mm, jarak lintasan sumbu Y: 1.300 mm, jarak gerak sumbu Z: 300 mm, gerak cepat sumbu X: 100 m/menit, pergeseran cepat sumbu Y: 100 m/menit, pergerakan cepat sumbu Z: 20 m/menit, daya nominal (semu): 28 kVA, produsen pengendali: OSAI, model controller: OPEN, tinggi total: 3.000 mm, panjang total: 5.400 mm, lebar total: 3.200 mm, berat keseluruhan: 4.100 kg, kecepatan spindel (maks.): 24.000 rpm, daya motor spindle: 12.000 W, jumlah spindel: 1, jumlah slot dalam magazin alat: 14, tegangan masuk: 400 V, jenis arus masuk: AC (pendingin udara), Perlengkapan: dokumentasi / manual, de-to-hu-lt-lv-2024-gantry-cnc Ksdowlaxqopfx Aa Nodg

Kondisi: baik (bekas), Tahun pembuatan: 1995, Description Control: Sinumerik 810M Spindle speed: 5000 rpm Turret head: 12-position Table clamping surface: length 850 mm, width 325 mm Very good condition, regularly serviced. Operating manual in German Number of axes: 3 (X, Y, Z) Ksdpfx Aajvt Amue Nodg Travel paths: X 420 mm, Y 330 mm, Z 240 mm Control system: Sinumerik 810 M Max. spindle speed: 5000 rpm Automatic tool changer for 12 tools Tool holder: SK40 Coolant system