Beli Penggiling Bor bekas (9.548)

Kondisi: baru, Drilling capacity in steel (diameter): 40 mm Throat depth: 290 mm Drilling stroke: 115 mm Spindle taper: SK 40 Spindle speeds: 70 – 3200 rpm Transverse table travel: 350 mm Longitudinal table travel: 130 mm Nwodpfx Asf Nb E Hobusb Table clamping surface: 590 x 190 mm Connection voltage: 400 V Max. milling cutter diameter: 80 mm Feed: 0.1 – 0.18 – 0.26 mm/rev Total power requirement: 1.1 kW Machine weight: approx. 0.4 t Space requirement: approx. 0.7 x 0.95 x 1.75 m Drilling and milling machine equipped with: • Automatic drilling feed • Tapping device • Compound table with adjustable guides • Quill feed • Gearbox • Coolant system • SK 40 taper

Kondisi: baru, Drilling capacity in steel (diameter): 40 mm Throat depth: 275 mm Drilling stroke: 120 mm Spindle taper: MT 4 Speed range: 75 – 3,200 rpm Table traverse (cross): 190 mm Table traverse (longitudinal): 490 mm Nwodpfx Asupw Uzobuob Clamping surface table: 700 x 210 mm Supply voltage: 400 V Max. milling cutter diameter: 80 mm Total power requirement: 1.1/1.5 kW Machine weight approx.: 0.35 t Space requirement approx.: 0.8 x 0.75 x 1.85 m Drilling/milling machine equipped with: • Tapping device • Compound table with adjustable guides • Quill feed • Gearbox • SK 40 spindle taper

Kondisi: baru, Drilling capacity in steel (diameter): 25 mm Throat depth: 185 mm Drilling stroke: 50 mm Spindle taper: MT 3 Spindle speeds: 50 - 2500 rpm Table traverse (cross): 178 mm Table traverse (longitudinal): 480 mm Table clamping surface: 700 x 180 mm Supply voltage: 230 V Total power requirement: 0.75 kW Machine weight approx.: 160 kg Space requirement approx.: 0.75 x 0.8 x 0.9 m Equipment Two-stage gearbox via flat belt (no longer plastic gears) Continuously variable speed range Fine quill feed via selectable handwheel Digital quill depth display Forward/reverse rotation Robust dovetail guides with adjustable gibs Nwedpfx Abjd Sb Ayeuob Way covers for guideways Adjustable control panel Chip guard with safety interlock Machine base optional.

Kondisi: siap digunakan (bekas), Max. speed: 2000 rpm, with operating manual. Nwsdpslbmtgofx Abueb

Kondisi: bekas, Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 106546-11, tinggi total: 3.550 mm, panjang total: 7.185 mm, lebar total: 4.720 mm, berat keseluruhan: 8.000 kg, The deep hole drilling machine operates with a single-lip gun drilling process. Drilling Unit Information: - Number of spindles: 1 Nwsdpfxexdm Aws Abujb - Continuously variable spindle speed: 500 – 8,000 rpm - Spindle drive power: 11 kW at 60% duty cycle - Maximum drilling depth: 1,000 mm (in a single pass without resetting) - Drilling diameter: 3 – 35 mm based on ST 60 - Drilling diameter with indexable inserts: 40 mm - Max. thread cutting: M27 - Milling material removal rate: 250 ccm/min Travel Distances: - X-axis travel: 1,050 mm - Y-axis travel: 600 mm - Z-axis travel: 800 mm - W-axis travel: 1,250 mm (with 2 steadies) Traverse Speeds: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid System Information: - Cutting fluid supply: deep hole drilling oil - Tank capacity: 1,200 liters - 1x hinged belt chip conveyor - 1x screw conveyor system - 1x hydraulic and pneumatic unit/equipment - 1x centralized lubrication system - 1x Submersible pump: Delivery rate: 200 l/min - 1x Low-pressure pump: Delivery rate: 100 l/min Pump drive: 2.2 kW - 1x Compact belt filter: Filtration rate: 175 l/min For machining steel or non-ferrous metals - 1x Radial piston pump with remote adjustment: Delivery rate: 2 – 120 l/min Pump drive: 11 kW - 1x Air cooler (heat exchanger) 22.5 kW - 1x Oil mist extraction, Extraction capacity: 1,250 m³/h Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with SK 40 tool holder Tool Change Magazine: Consisting of: - Tool change magazine with intermediate gripper - SK 40 tool holder - Max. allowable tool diameter: 80 mm - Max. allowable tool length: 250 mm - Tool storage capacity: 80 positions - 2x Swiveling tool steady rests for guiding and supporting long drilling tools, with automatic return to home position. Clamping Table with B-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - B-axis: 360° - Positioning accuracy: B-axis +/- 30" - Table travel: 800 mm - Payload (centered): 1,500 daN Electrical Equipment Information: - 1x CNC control unit, Heidenhain iTNC 530 - 1x drilling process monitoring - 1x RENISHAW measuring probe Connection Data: - Operating voltage: 3AC 400 V ± 10% – frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 26 kW

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, tinggi produk (maks.): 60 mm, tinggi produk (min.): 12 mm, panjang produk (maks.): 3.200 mm, panjang produk (min.): 240 mm, lebar produk (maks.): 800 mm, lebar produk (min.): 140 mm, TECHNICAL DETAILS Components: ESSE2 transverse loader: automatic BIESSE FTT: with 4 heads, drilling and milling, automatic tool changer Tilting device: available BIESSE FTT: with 2 heads, drilling and milling, automatic tool changer BIESSE FHT: horizontal drilling and dowel insertion ESSE2 transverse unloader: automatic Panel dimensions Panel length: 240 - 3,200 mm Single panel width: 140 - 1,550 mm Panel width: 140 - 800 mm Panel thickness: 12 - 60 mm Drilling units Drilling heads FTT 1: 4 Drilling heads FTT 2: 2 Vertical spindles (X direction): 14 independent per head Vertical spindles (Y direction): 18 independent per head Horizontal spindles (X direction): 3 independent, with double output Horizontal spindles (Y direction): 3 independent, with double output Tool changing system Njdpfxowmcxie Abuswb Revolver cassettes: 2 Positions per cassette: 56 Application: Automatic tool change of the vertical spindle tips on 4 drilling units of processing centers A and B Milling spindles Electrospindle 1: 3.7 kW (5 HP), ISO 30, with inverter and triple tool holder rack Electrospindle 2: 3.7 kW (5 HP), ISO 30, with inverter and triple tool holder rack Lateral positioning units Workstations: 2 for parallel processing of identical or mirrored panels Left positioning element: fixed for side reference Right positioning element: movable in X direction, on lower supports, with linear guide Adjustment: automatic according to panel’s X dimension Drive: brushless with digital control Function: Detection of the actual X-length in the machining center, automatic correction of drilling positions Max. travel speed: 120 m/min Feeding and unloading Infeed system: 1 belt conveyor with cross infeed, individual drive Outfeed system: 1 belt conveyor with cross discharge, individual drive Additional: Cleaning blower in discharge area Safety features Standards: CE compliant Safety equipment: Comprehensive safety enclosures

Kondisi: baru, Tahun pembuatan: 2024, • Drilling and milling machine for applications such as metal and steel construction, prototyping, plastics processing, etc. • Machining of workpieces up to 3000 mm in length; longer components possible with multiple clamping thanks to removable side panels • SK 40 spindle taper • 7.5 kW drive power • Easy-to-use controls – no programming knowledge required • Continuously variable spindle speeds from 140 to 2000 rpm • 10-position automatic tool changer • Tapping capability up to M24 • Tool length measurement • Handwheel Nwjdpsdyn Tpjfx Abuob • Milling, drilling, flow drilling, countersinking, and more • MADE IN GERMANY Marking as well as conventional drilling/milling are no longer necessary, resulting in significant time savings for the production of single parts and small series. • Table length: 3000 mm (range: 2000–8000 mm possible) • Distance from table to tool holder: 700 mm • Table width: 560 mm, T-slots M14 • Drilling capacity up to 35 mm diameter • Front light barrier • Coolant system • Movable 19” touchscreen panel with Windows Price on request

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, A CNC gantry machining center Trima is available. Workpiece dimensions X/Y/Z: 2500mm/1100mm/80mm, spindle power: 7.5kW, speed: 24,000 rpm, tool positions: 10, travelling speed X/Y/Z: 55m/35m/15m/min. Machine dimensions X/Y: approx. 4400mm/2500mm, weight: approx. 3200kg, control unit: Siemens Sinumerik. The machine has a control system fault. The reference run is interrupted. Documentation is available. An on-site inspection is possible. Nsdpfx Aswk Nlwjbuswb

Tahun pembuatan: 1995, Kondisi: siap digunakan (bekas), A CNC fixed-table milling and drilling center Bimatec Soraluce is available. Travel distances X/Y/Z: 2500mm/900mm/1600mm, spindle speed: 2000 rpm, spindle taper: ISO40/M16, tool stations: 30. Transport dimensions X/Y/Z: approx. 5300mm/3450mm/3500mm, weight: approx. 13,500kg, control unit: Heidenhain CNC 415, operating hours: 31,507 h. Includes fixed table, moving column, automatic indexing milling head, manual touch probe, coolant system, and filtration unit. Documentation is available. Inspection on site possible. Nwjdpfxsu T Rgwj Abusb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1959, Three old used machines without documentation are available. 1x multi-spindle drilling machine Hille type: BG 80, year of manufacture: 1959. 1x NC milling machine SHW type: UE 21. 1x radial drilling machine Raboma type: SKM. All machines are in working condition. On-site inspection is possible. Nsdpfx Astk Rwljbuswb

Kondisi: baru, Bernardo drilling and milling machine KF 60 including 3-axis digital display and y-axis feed Nsdpfed Du Tljx Abuowb Technical Specifications Drilling capacity in steel: 35 mm Drilling capacity in cast iron: 40 mm Tapping capacity (max): M 16 Throat depth: 210 - 550 mm Spindle head swivel range: 90° Spindle speed (8): 115 - 1750 rpm Spindle taper: ISO 40 Quill stroke: 125 mm Table size: 800 x 240 mm T-slot size: 16 mm Tilting table: -45° to +45° Distance spindle / table: 120 - 375 mm Longitudinal travel (x): 375 mm Cross travel (y): 175 mm Vertical travel (z): 255 mm Motor output S1 100%: 0.85 / 1.5 kW Motor input S6 40%: 1.1 / 2.2 kW Machine dimensions (W x D x H): 1300 x 1400 x 2100 mm Weight approx.: 750 kg Scope of delivery: • 3-axis digital readout i200 with LCD display • Drawbar M 16 • LED machine lamp • Coolant system • Adapter ISO 40/MK 3 • Adapter ISO 40/B18 • Reduction sleeve MK 3/2 • Height-adjustable safety guard • Automatic milling table feed on x-axis • Automatic milling table feed on y-axis

Kondisi: baru, Bernardo Drilling and Milling Machine FM 50 HSV including 3-axis digital display Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Max. face mill diameter: 80 mm Throat: 220 mm Spindle speed (12): 75 – 3200 rpm Spindle taper: MT 4 Quill stroke: 120 mm Quill feed (3): 0.10 / 0.18 / 0.26 mm/rev Table size: 800 x 240 mm Travel (x / y): 555 / 225 mm Swiveling milling head: -60° to +60° Spindle-to-table distance: 95 - 485 mm Milling head height adjustment: 390 mm T-slot size: 14 mm Feed motor: 90 W Motor output S1 100%: 1.1 / 1.5 kW (400 V) Motor input S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H)*: 1140 x 970 x 1460 mm Weight approx.: 322 kg Scope of delivery: • 3-axis digital readout i200 with LCD display • Quick-change drill chuck 3 – 16 mm / B 16 • Drill chuck arbor MT 4 / B 16 • Drawbar M 16 • Reducing sleeve MT 4 / 3 • Combination cutter arbor MT 4 / 27 mm • Height-adjustable safety guard • Automatic quill feed • Milling head feed motor • LED machine lamp • Digital quill stroke indicator • Tapping device • Accordion safety cover • Longitudinal scale Nwjdod Du Tfjpfx Abujb • Operating tools

Kondisi: baik (bekas), en-Mikron-WF31D-Precision-Milling-and-Drilling-Machine Machine with chip and splash guard enclosure Equipped with Heidenhain TNC355 control Technical Specifications The WF 31 D is a precision milling and drilling machine, designed for series production and CNC training applications. The drive operates via an automatically shiftable stepped gearbox and Poly-V belt. The vertical spindle can be extended by 90 mm; conversion from vertical to horizontal machining is possible. Ball screw drives with DC motors enable simultaneous feed movements. All guideways are protected against dust, chips, and coolant. Technical Data Manufacturer: Mikron Model: WF31D Control: Heidenhain TNC 355 Longitudinal travel (X): 560 mm Transverse travel (Y): 500 mm Nedpfjwiucfsx Abujwb Vertical travel (Z): 400 mm Drive power: 3.3/4.0 kW Speed range: 40–4000 rpm Feed rate: 2–3000 mm/min Rapid traverse X/Y: 6000 mm/min, Z: 5000 mm/min Electrical Equipment Total installed rated power: 10.0 kW Installed effective power: 7.3 kW Operating voltage: 3 x 380 V – 50/60 Hz Protection class: IP 54 Maximum permissible ambient temperature: +35 °C Relative humidity: 75% Dimensions and Weight Width: 2450 mm Length: 2800 mm Height: 2000 mm Net weight of the machine: approx. 2570 kg Further new and used items available in our shop! International shipping costs on request!

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 450 mm, jarak lintasan sumbu Y: 170 mm, jarak gerak sumbu Z: 410 mm, kecepatan spindel (maks.): 2.400 rpm, kecepatan spindel (min.): 120 rpm, jenis arus masuk: tiga fasa, panjang meja: 670 mm, lebar meja: 300 mm, Sixis S-103-R 3-fasige 380V motor werkt probleemloos. 9 Spilsnelheden instelbaar van 120 tot 2400 tpm. Automatische voeding op de X- & Z-as. Traploos instelbare voedingssnelheid. Asverplaatsing: X: 450 mm Y: 170 mm Z: 410 mm Tafel kan ook over het langsslede bewegen. Tafelafmeting: 670x300 mm Kop is in hoek verstelbaar. ISO30 spindelopname. Koelpomp geïntegreerd in de machinevoet. Totale afmetingen: 115x110x150 cm Zwitserse precisie-machinemachine. Inclusief getoonde accessoires! Neem contact met ons op voor verzendmogelijkheden! Nwjdowbkpfspfx Abueb € 4.750,00

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 800457, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 3.400 mm, jarak gerak sumbu Z: 1.000 mm, jarak antara penyangga: 2.000 mm, model controller: Siemens 840D SL, Mesin telah direkondisi secara menyeluruh pada tahun 2012. DETAIL TEKNIS Perjalanan X: 4.000 mm Perjalanan Y: 3.400 mm Perjalanan Z: 1.000 mm Nsdpfx Abox Uwnbouowb Jarak antara tegak: 2.000 mm Daya spindle: 37 kW Kecepatan putar: 12–2.800 rpm Jarak spindle milling ke permukaan penjepit: 280–1.280 mm Tipe dudukan: ISO SK-50 Ukuran meja – longitudinal: 3.000 mm Ukuran meja – melintang: 1.500 mm Kapasitas beban meja: 2 x 10 t Rentang putar sumbu C: 0–360° (setiap 1°) Rentang ayun: 90°–0°–90° (setiap 1°) DETAIL MESIN Kontrol: Siemens 840D SL Sumbu: 5 dikendalikan Kebutuhan daya total: 70 kVA Dimensi & Berat Ruang yang dibutuhkan: sekitar 10.200 mm x 7.200 mm x 5.925 mm Berat mesin: sekitar 82 t PERLENGKAPAN Sistem pergantian alat otomatis untuk 60 alat 1 unit milling universal 1.750 Nm Catatan: Mesin sudah dalam keadaan dibongkar.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, kedalaman pengeboran: 660 mm, jarak pergerakan sumbu X: 700 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 1.000 mm, diameter bor: 30 mm, RINCIAN TEKNIS Kedalaman bor: 660 mm Diameter bor: 30 mm Perjalanan sumbu X: 700 mm Perjalanan sumbu Y: 500 mm Perjalanan sumbu Z: 1.000 mm Perjalanan sumbu W: 250 mm Kecepatan spindel: 60 - 60.000 rpm Panjang meja: 900 mm Lebar meja: 500 mm Kapasitas beban meja: 2.000 kg RINCIAN MESIN Kontrol: Heidenhain iTNC530 Dimensi & Berat Dimensi (P x L x T): 3.706 x 3.960 x 2.650 mm Berat total: 8.000 kg Nwjdjya U U Uspfx Abusb PERLENGKAPAN Meja putar NC (sumbu ke-4) Konveyor serbuk (chip conveyor) Filter pita kertas Handwheel elektronik Dokumentasi asli

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: NTX26200913, panjang pembubutan: 1.530 mm, diameter pembubutan: 670 mm, kecepatan spindel (maks.): 12.000 rpm, jarak pergerakan sumbu X: 675 mm, jarak lintasan sumbu Y: 300 mm, jarak gerak sumbu Z: 40 mm, kecepatan rotasi (maks.): 4.000 rpm, jumlah slot dalam magazin alat: 76, Simultaneous 5-axis machining with Direct Drive Motor (DDM) in the B-axis HIGHLIGHTS Milling spindle: compactMASTER with an extremely short construction length of 350 mm Machining option: Complete 6-sided machining thanks to a high-performance counter spindle TECHNICAL DETAILS X1 axis travel: 675 mm (+550 / -125 mm) Y1 axis travel: 300 mm (+/-150 mm) Y2 axis travel: +/-40 mm Machining area Maximum machining area: Ø 670 mm x 1,530 mm Control Control type: FANUC F31iB5 with CELOS Operation: CELOS - ERGOline Touch Spindle Main spindle: Standard spindle Ø 91 mm, 4,000 rpm Counter spindle: Standard spindle Ø 91 mm, 4,000 rpm Chuck Main spindle chuck: Hollow chuck 10", Ø 254 mm Counter spindle chuck: KITAGAWA 10" hollow chuck BB210A821 Safety: Double foot switch with protective guard for main and counter spindle Stroke monitoring: Automatic stroke monitoring of the clamping cylinder for main and counter spindle Turn-mill spindle Spindle (B axis): Standard speed 12,000 rpm (FANUC) Tool interface: Capto C6 Positioning: B axis with 0.0001° accuracy for 5-axis machining Tool turret Type: Turret 2 with tailstock function Equipment: 10-station turret for bolt-mounted tool holders Milling capacity: 6,000 rpm, 40 Nm (Turret 2, FANUC) Tool magazine Capacity: 76 tools Tool interface: CAPTO C6 Measuring and monitoring Tool presetting: Manual tool presetting device for main and counter spindle, removable (standard) Measuring system: Direct measuring system in X, Y, and Z axes of the turn-mill spindle Sensor system: Spindle sensor measuring system with wireless signal transmission, Renishaw RMP600 Automation Signal lamp: 4-color (red, yellow, green, blue) Interface: For bar feeder (LNS, IRCO, IEMCA, Edge Technologies, multiple) MACHINE DETAILS Machine dimensions (L x W): 5,825 x 2,830 mm Nwedpeyap Shofx Abuob Coolant and chip disposal Chip conveyor: Discharge to the right, hinge belt + drum filter Coolant: Use of water-soluble cutting fluids (emulsion) Pressure: High-pressure coolant system with 70 bar Coolant supply: Through-spindle for tool spindle and lower turret Filtration system: Knoll/Interlit Compressed air system Blow-off system: For chucks on main and counter spindle Oil mist extraction system Oil mist separator: Extraction port Ø 200 mm, AFS 1600 Filter and cooling system Filtration system: INTERLIT TMF300/980 compact filter system, 70 bar Additional pressure: 15 bar for Turret II with lifting pump (FANUC/MITSUBISHI) Chiller: INTERLIT auxiliary chiller, 15 kW

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1997, jam operasional: 5.986 h, nomor mesin/kendaraan: 20140, ROLLER BAN SAKAI BEKAS Njdpfx Asx Uxlnsbuewb MODEL: TZ600 NOMOR SERI: 20140 TAHUN: 1997 JAM OPERASI: 5986

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2001, jam operasional: 2.249 h, nomor mesin/kendaraan: 07.05.11005345.0321, GEBRAUCHTE WIRTGEN FRÄSMASCHINE IN FUNKTIONSTÜCHTIGEM ZUSTAND MODELL: W1000L Nedpfewv Apajx Abuswb SERIENNUMMER: 07.05.11005345.0321 BAUJAHR: 2001 BETRIEBSSTUNDEN: 2249

Kondisi: baik (bekas), Tahun pembuatan: 2004, DGT Plus control (Siemens-based) Grinding length: 2400 mm Grinding width: 1290 mm Grinding height: 700 mm Magnetic chuck: 2000 x 1100 mm Nsdpfxsvg Sife Abuswb Max. table load capacity: 5000 kg Grinding wheel width: 150 mm Grinding spindle speed: 960 rpm Machine weight: approx. 30 tons

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: MGB1320E, tinggi pusat: 180 mm, berat benda kerja (maks.): 100 kg, panjang penggilingan: 500 mm, diameter roda gerinda: 400 mm, lebar total: 14.150 mm, panjang total: 18.000 mm, tinggi total: 14.750 mm, diameter penggilingan: 320 mm, panjang benda kerja di antara senter: 350 mm, lebar roda gerinda: 50 mm, kecepatan spindel (maks.): 3.000 rpm, panjang pemakanan sumbu X: 500 mm, panjang umpan sumbu Z: 150 mm, kecepatan pemakanan sumbu X: 10 m/menit, laju pemakanan sumbu Z: 1 m/menit, berat keseluruhan: 2.100 kg, kecepatan maksimum spindel benda kerja: 400 rpm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Beijing No.2 Machine Tool (BEIER) Semi-automatic High-speed External Cylindrical Grinding Machine MBS1320E Njdpfotr Azkex Abuowb Online production equipment; machine testing available; roundness within 0.001 mm Manufacturer: BEIER MACHINE TOOL WORKS CO LTD

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 180 mm, berat benda kerja (maks.): 100 kg, panjang penggilingan: 500 mm, diameter roda gerinda: 400 mm, lebar total: 14.150 mm, panjang total: 18.000 mm, tinggi total: 14.750 mm, diameter penggilingan: 320 mm, panjang benda kerja di antara senter: 350 mm, lebar roda gerinda: 50 mm, kecepatan spindel (min.): 3.000 rpm, panjang pemakanan sumbu X: 500 mm, panjang umpan sumbu Z: 150 mm, kecepatan pemakanan sumbu X: 10 m/menit, laju pemakanan sumbu Z: 1 m/menit, berat keseluruhan: 2.100 kg, kecepatan maksimum spindel benda kerja: 400 rpm, Modified and upgraded cylindrical grinding machine, Beier Machine Tool Currently in production Test operation available Nwjdpottfq Hefx Abusb Roundness accuracy within 0.001 mm BEIER MACHINE TOOL WORKS CO., LTD.

Kondisi: bekas, Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 北二 半自动高速外圆磨床 MBS1320E, Xiamen 5102 Yuanli Precision Manufacturing Co., Ltd. Bei'er Semi-Automatic High-Speed External Cylindrical Grinder MBS1320E Online production equipment Machine trial available Roundness within 0.001 mm Max. grinding diameter: 200 mm Max. grinding length: 500 mm Njdpfxetr Udke Abujwb

Kondisi: baru, Tahun pembuatan: 2025, de Nwsdpfx Abjq Nf Uwjujb

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 55 kW (74,78 hp), Tahun pembuatan: 2025, Eine Kohlekugelmühle, auch als Kohlemahlmühle bekannt, ist eine Art Mahlwerk, das zum Mahlen und Mischen von Materialien für den Einsatz in der Erzaufbereitung, Farben, Pyrotechnik, Keramik und beim selektiven Lasersintern verwendet wird. Es handelt sich um ein zylindrisches Gerät, das Kohle, Erze, Chemikalien und andere Materialien mechanisch zerkleinert oder mischt. Hier sind die wichtigsten Merkmale und Aspekte einer Kohlekugelmühle: 1. Zylindrische Bauweise: - Die Kohlekugelmühle besteht in der Regel aus einem waagerechten zylindrischen Gehäuse. Die Innenfläche ist meist mit einem verschleißfesten Material wie Stahl oder Gummi ausgekleidet, um sie vor Abrieb zu schützen. 2. Mahlgutträger: - Als Mahlgutträger werden Stahlkugeln oder Keramikkugeln eingesetzt, die den Mahlprozess unterstützen. Durch die Drehung der Mühle fallen die Mahlkörper herab und zermahlen die Kohlepartikel. 3. Kohlezufuhr und Austrag: - Die Kohle wird üblicherweise über ein zentrales Einlaufrohr zugeführt, und die gemahlenen Kohlepartikel werden am Austragsende entladen. Während des Mahlprozesses wird die Korngröße der Kohle reduziert. Nwjdpfxoq Nf U Ee Abusb 4. Rotationsbewegung: - Die Kohlekugelmühle dreht sich um ihre horizontale Achse. Die Drehung wird von einem Motor angetrieben, und die Geschwindigkeit kann zur Steuerung des Mahlprozesses und der Partikelgröße angepasst werden. 5. Luftstrom (Air Sweeping): - Einige Kohlekugelmühlen sind nach dem Luftstrom-Prinzip konstruiert. Luft wird in die Mühle eingeblasen, um das Trocknen und den Austrag des pulverisierten Kohles zu unterstützen. Dieses Design hilft, den Feuchtigkeitsgehalt der Kohle zu regulieren und fördert den Mahlprozess. 6. Trocknen und Mahlen: - Neben dem Mahlen kann die Kohlekugelmühle auch eine Trocknungsfunktion besitzen. Das ist besonders wichtig, wenn die zu verarbeitende Kohle Feuchtigkeit enthält. Trocknung und Mahlen erfolgen oft gleichzeitig in bestimmten Kohlemühlen. 7. Steuerungssystem: - Moderne Kohlekugelmühlen verfügen über Steuerungssysteme zur Überwachung und Regelung wichtiger Parameter wie Drehzahl, Beschickungsrate und Temperatur. Dadurch kann der Mahlprozess optimiert und die Kohleverarbeitung effizient gestaltet werden. 8. Anwendung: - Kohlekugelmühlen kommen vor allem in kohlebefeuerten Kraftwerken und anderen Industrien zum Einsatz, in denen Kohle als Brennstoff verwendet wird. Sie sind Teil der Kohlemahlanlage, die Kohle zu feinem Pulver für die Verbrennung in Kesseln verarbeitet. 9. Sicherheitsmerkmale: - Sicherheitsfunktionen wie Überwachungsgeräte und Not-Aus-Systeme sind häufig in Kohlekugelmühlen integriert, um einen sicheren Betrieb zu gewährleisten. 10. Verschleißschutz: - In besonders beanspruchten Bereichen der Kohlekugelmühle werden verschleißfeste Materialien verwendet, um dem abrasiven Charakter der Kohle standzuhalten und die Lebensdauer der Mühlenkomponenten zu verlängern. Kohlekugelmühlen spielen eine entscheidende Rolle bei der Kohlezerkleinerung in Kraftwerken und tragen zur effizienten Verbrennung von Kohle zur Stromerzeugung bei. Das spezifische Design und die Ausstattung können je nach Hersteller und Einsatzbereich variieren.