Beli Platen bekas (698)
Urutkan hasil
- Harga terendah Harga tertinggi
- Iklan terbaru Iklan tertua
- Jarak terpendek Jarak maksimum
- Tahun pembuatan terbaru Tahun pembuatan tertua
- Pembaruan terbaru Pembaruan tertua
- Produsen dari A sampai Z Produsen dari Z ke A
- Relevansi
- Harga terendah
- harga
- Harga tertinggi
- harga
- Iklan terbaru
- Tanggal pengaturan
- Iklan tertua
- Tanggal pengaturan
- Jarak terpendek
- jarak
- Jarak maksimum
- jarak
- Tahun pembuatan terbaru
- tahun pembuatan
- Tahun pembuatan tertua
- tahun pembuatan
- Pembaruan terbaru
- pembaruan
- Pembaruan tertua
- pembaruan
- Produsen dari A sampai Z
- pabrikan
- Produsen dari Z ke A
- pabrikan
- Penamaan dari A ke Z
- Penunjukan
- Penamaan dari Z ke A
- Penunjukan
- Model dari A hingga Z
- Model
- Model dari Z ke A
- Model
- Referensi terendah
- referensi
- Referensi tertinggi
- referensi
- Waktu operasional terpendek
- Waktu operasional
- Waktu operasional terpanjang
- Waktu operasional
- relevansi
- relevansi
Iklan kecil
Jerman
11.248 km
Arburg 420A 1000-400
Arburg420A 1000-400
Hubungi
Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), This Arburg 420A 1000-400 was manufactured in 2007. It features electromechanical primary movements powered by servo drives, a modular plasticizing unit with adaptive temperature control, and a five-point double toggle clamping system with servo-electric adjustment. The Selogica control system enhances operational efficiency. If you are looking for a high-quality injection moulding machine, you should consider the Arburg 420A 1000-400, which we have for sale. Contact us for more information about this machine.
• Drive technology:
• Electromechanical primary movements with servo drives: dosing, injection, mould opening/closing, ejector
• Hydraulic movement for nozzle displacement
• Thermoplastic processing
• Compact hydraulic unit with pressure accumulator, 5.5 kW, 10 cm³ pump (Pos 132/22)
• Machine mounting plates with centring ring D125 mm (Pos 356/11)
• Injection unit (servo-controlled):
• Horizontal injection unit 400
• Modular plasticizing unit with central coupling and adaptive temperature control
• Plasticizing unit D25 mm, high wear/ corrosion resistance; open nozzle (220/25), flat nozzle tip (300/00), heating band (320/00) (Pos 060/25)
• Heating band temperature up to 450 °C (Pos 427/02)
• Standard drive coupling, double-flat (Pos 061/10)
• Without hopper (Pos 600/06)
• Servo-regulated, programmable nozzle contact force (Pos 408/03)
• Clamping unit:
• Five-point double toggle with servo-electric adjustment
Cpodpfx Aaex D Hgvj Tow
• Electric mould height adjustment
• Prepared for mounting a linear robot on the fixed platen
• Mould protection via ejector position monitoring (Pos 605/05)
• Machine feet (Pos 605/03)
• Quick coupling for ejector bar (Pos 605/06)
• Electric ejector with position control (Pos 381/05)
• Programmable hydraulic core for parallel movements (Pos 382/00)
• Air blower unit 1 with pressure reducer (Pos 361/01)
• Machine cooling circuits, regulated and programmable (Pos 525/02)
• Cooling water manifold with 4 manually adjustable circuits (Pos 512/04)
• Control, switch cabinet, interfaces:
• Selogica control
• Software packages (Pos 555: Advanced mechanical cycle controls; Advanced movements; Production control; Optimisation/operator support; Quality assurance control; Documentation)
• Temperature-controlled switch cabinet (Pos 605/07)
• Selogica Direct, French language (Pos 131/05)
• Flash card reader (Pos 455/05)
• Operator authorisation via card, Euromap 65 (Pos 455/06)
• Acoustic alarm (Pos 457/00)
• Additional socket combination with RCD (Pos 444/01)
• 12 mould temperature measuring zones (Pos 469/12)
• Additional heating band for nozzle (Pos 468/01)
• Interface for HB-Therm temperature controllers (Pos 453/01)
• USB-serial interface for printer (Pos 454/03)
• Robot interface Euromap 67 (Pos 425/05)
• Electrical and mechanical preparation for external robot (Pos 425/02)
• Water shut-off valve (Pos 501/01)
• Interface for Thermolift dryer (Pos 464/01)
• Interface for colour dosing unit (Pos 493/00)
Additional equipment
• Electric conveyor belt, programmable (Pos 412/02)
• Sorting flap for separating good/reject parts (Pos 375/00)
Iklan kecil
Jerman
11.248 km
SUMITOMO SHI DEMAG IntElect 220/610-750 smart
SUMITOMO SHI DEMAGIntElect 220/610-750 smart
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 27.551 h, gaya penjepit: 2.200 kN, tinggi total: 2.100 mm, This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It is an all-electric injection moulding machine renowned for its precision and efficiency. Ideal for anyone looking to expand their production capabilities with reliable technology. Contact us for further information.
Additional Equipment
• Sepro Robot SDR 22
Machine Advantages
Cpedpfxsx D Hnyo Aa Tjw
Technical Specifications
• Screw diameter: 45 mm / screw geometry: standard / l/d ratio: 20 / specific injection pressure: 2150 bar / max shot volume: 329 cm³ / max shot weight: 293 g / injection rate without accumulator: 254 cm³/s
• Metering stroke: 207 mm / max nozzle stroke: 450 mm / nozzle immersion depth: 20 mm / nozzle contact force: 58 kN / number of heating zones: 4 / hopper capacity: 50 l / maximum injection speed: 160 mm/s
• Clamping force: 2420 kN / maximum opening stroke: 550 mm / minimum mould height: 300 mm / maximum mould height: 580 mm / maximum platen distance: 1130 mm
• Clamping platens (HxV): 880x830 mm / tie bar spacing (HxV): 610x560 mm / ejector stroke: 150 mm / ejector force: 58 kN
• Dry cycle time according to Euromap 6 (stroke): 427 mm
• Net weight without oil: 10,100 kg
Dimensions
Machine depth: 6460 mm
Iklan kecil
Jerman
11.248 km
Engel Engel ES650H/200W-200HL-2F (2000)
EngelEngel ES650H/200W-200HL-2F (2000)
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, jam operasional: 63.929 h, gaya penjepit: 2.000 kN, produsen pengendali: ENGEL, model controller: CC 200 (CC200), This 3-axis Engel ES650H/200W-200HL-2F injection molding machine was manufactured in 2000. It features a clamping force of 2000 kN, tie bar spacing of 920 × 750 mm, and a screw diameter of 50 mm. Equipped with two injection units, hydraulic locking, and rotary table control, this machine ensures precise and efficient operation. If you are looking for a high-quality injection molding machine, consider the Engel ES650H/200W-200HL-2F we have for sale. Contact us for further information.
• Condition: Well-maintained and serviced
• Clamping unit:
• Max. mold weight: 1,500 kg
• Total weight: 3,000 kg
• Tie bar spacing (H × V): 920 × 750 mm
• Platen size: 1,150 mm
• Opening stroke: 700 mm
• Daylight opening: 700 mm
• Min. mold height: 450 mm
• Max. mold height: not specified
• Ejector stroke: 150 mm
• Ejector force: 61 kN
• Retraction force: not specified
• Centering diameter (A-side): 110 mm
• Centering diameter (B-side): 90 mm
• Locking system: Hydraulic / Pneumatic
• Number of core pulls: 4
• Rotary table control: Yes
• Core pull control: Yes
• Index plate control: Yes
• Injection unit 1 (650H):
• Max. shot volume: 200 cm³
• Shot volume: 392 cm³
• Screw diameter: 50 mm
• L/D ratio: 20
• Screw speed: 290 rpm
• Injection pressure: 1,240 bar
• Injection speed: 120 g/s
• Plasticizing rate: 41 g/s
• Nozzle aperture: 15 mm
• Installed pump: 30 / 12.3 kW
• Injection unit 2 (200W):
• Max. shot volume: 140 cm³
• Shot volume: 69 cm³
• Screw diameter: 25 mm
• L/D ratio: 24
• Screw speed: 480 rpm
• Injection pressure: 2,000 bar
• Injection speed: 60 g/s
• Plasticizing rate: 12 g/s
• Nozzle aperture: 15 mm
• Installed pump: approx. 6.8 kW
• Controls and features:
• SPC (Statistical Process Control): Yes
• Print interface: Yes
• 2nd injection cylinder: Yes
Cpodpfxjyf Htyo Aa Tsw
• Mold monitoring: No
• Special programs: Yes
Additional equipment
• Part extraction device (robot): ERC 23/1-E
• Travel axes: X = 500 mm, Z = 1,400 mm
• Max. mold dimensions (Y-axis): 1,000 mm
• Hot runner control: 18 zones
• Mold sensor technology: p-z-t-σ (Kistler)
• Additional equipment: GealanXcomp
• Automation cell: No
• Filter dryer: No

Informasi sekarang
+44 20 806 810 84
+44 20 806 810 84
Pasang iklan sekarang
*per iklan/bulan
Iklan kecil
Jerman
11.248 km
FERROMATIK K- TEC250S
FERROMATIKK- TEC250S
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, jam operasional: 80.649 h, gaya penjepit: 2.500 kN, diameter sekrup: 50 mm, el
Cedpoymzawsfx Aa Topw
Iklan kecil
Jerman
11.248 km
DEMAG ET60-200 concept
DEMAGET60-200 concept
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, jam operasional: 96.986 h, gaya penjepit: 600 kN, diameter sekrup: 30 mm, en-GB
Cpjdpfx Aeyg Nfuea Tow
Iklan kecil
Jerman
11.248 km
Engel ES650H/200W-200HL-2F
EngelES650H/200W-200HL-2F
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 96.194 h, gaya penjepit: 2.000 kN, diameter sekrup: 40 mm, berat injeksi: 216 g, This Engel ES650H/200W-200HL-2F was manufactured in 2004. It features a clamping force of 2,000 kN and platen dimensions of 920 x 760 mm. The machine is equipped with a two-component system with screw diameters of 40 mm and 25 mm, as well as an ERC 23/1-E robot system for enhanced automation. Ideally suited for precision hydraulic injection molding. Please contact us for further information on this machine.
• Configuration: 2K (two-component injection molding machine)
• Clamping Unit:
• Platen size (H x V): 920 x 760 mm
• Minimum mold height: 500 mm
• Opening stroke: 750 mm
• Max. daylight (distance between platens): 1,150 mm
• Max. mold weight: 3,000 kg (1,500 kg per side)
• Ejector stroke: 150 mm
• Ejector force: 80 kN
• Core pulls: 3 (ejector side)
• Centering ring diameter (ejector side): 200 mm
• Injection Unit 1 (Primary - 650H):
• Screw diameter: 40 mm
• Injection pressure: 1,946 bar
• Shot volume (theoretical): 251 cm³
Cpjdpfx Aajyfrb Nj Tew
• Shot weight (PS): 216 g
• Screw speed: 290 rpm
• L/D ratio: 20
• Nozzle radius: 15 mm
• Injection Unit 2 (Secondary - 200W):
• Screw diameter: 25 mm
• Injection pressure: 2,089 bar
• Shot volume (theoretical): 69 cm³
• Shot weight (PS): 60 g
• Screw speed: 480 rpm
• L/D ratio: 24
• Interfaces/Control: printer interface; process control included
Additional Equipment
• Robot System: ERC 23/1-E linear robot
• X-axis stroke: 500 mm
• Y-axis stroke: 1,000 mm
• Z-axis stroke: 1,600 mm
• Hot runner control: 16 zones
Iklan kecil
Jerman
11.248 km
Engel ES650H/200W-200HL-2F
EngelES650H/200W-200HL-2F
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, jam operasional: 98.780 h, gaya penjepit: 2.000 kN, berat keseluruhan: 12.200 kg, produsen pengendali: ENGEL, model controller: CC100, en-GB
Cedpfx Aasyf H Nne Tepw
Iklan kecil
Italia
11.248 km
OMC PL 90s
OMCPL 90s
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2025, panjang langkah: 400 mm, This OMC PL 90s veneer press was manufactured in 2025. It features a platen size of 3000 x 1300 mm, an upward stroke of 400 mm, and a pressing force of 90 tons over 80% of the surface area. Equipped with electronic heating plates by Elkom, it ensures a maximum temperature of 120°C. The hydraulic system consists of a two-stage power unit with noise reduction and a pump for rapid opening and closing. Safety features include a safety cable, an emergency stop button, and two-hand operation. Please contact us for further details on this machine.
Machine Advantages
Technical Highlights
Csdeyalmbspfx Aa Tspw
• Platen size: 3000 x 1300 mm
• Stroke direction: upward stroke (from bottom to top)
• Plate type: Elkom electronic plates
• Pressing force: 90 tons over 80% of the surface
• Press cylinders: 6 x Ø 70 mm
• Specific pressure: 2.05 kg/cm² over 100% of the surface, 2.56 kg/cm² over 80% of the surface
• Loading/Unloading side: 3000 mm
• Heating system: electronic, 25.4 kW, maximum temperature of 120°C
• Automatic opening with timer
Additional Information
Hydraulic System
Two-stage unit with submersible pump for noise reduction and lubrication of rotating parts.
Pump for rapid closing/opening (high flow – low pressure 35 l/min), pressing pump (low flow – high pressure 1.6 l/min).
2 HP electric motor.
Control/Safety valves: maximum pressure valve, pressure holding valve (check valve), pre-release pressure valve, and solenoid valve for oil drain.
Control Panel and Electrical System
2 temperature controllers for platen temperature adjustment
Manometer for pressure control with automatic pressure equalization system
Main On/Off switch
Two manual safety buttons for closing the press
Timer for automatic opening
Selector switch for manual or automatic opening of the platen after the work cycle
On/Off switch for the top and bottom platen heating elements
Safety Systems
Timed two-hand control for closing the press
Safety cable on all four sides of the press
Platen locking mechanism for maintenance
Protective guards for rack-and-pinion units
Safety labels and warning instructions
Operation and maintenance manual
Complies with CE standards
Press Structure
Manufactured from composite and welded steel
Fitted with a rack-and-pinion guide system for precise parallel movement during platen closing/opening.
Elkom Heating Plate
Electric plates with electrical resistances
Composed of a chipboard core with an aluminium plate, where electrical resistances are mounted
Maximum working temperature: 120°C
Maximum shear force: 7 kg/cm²
Iklan kecil
Jerman
11.248 km
Arburg 470 E 1000-700
Arburg470 E 1000-700
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, jam operasional: 68.463 h, diameter sekrup: 35 mm, Arburg 470 E 1000-700 ini diproduksi pada tahun 2011. Ini adalah mesin injeksi listrik yang kokoh dengan gaya penutupan 100 ton dan diameter sekrup 25 mm. Mesin ini beroperasi pada 400V 3∼, 50Hz, dengan daya terpasang total 78kW dan dirancang untuk kinerja yang efisien. Manfaatkan kesempatan untuk membeli mesin injeksi listrik Arburg 470 E 1000-700 ini. Hubungi kami untuk informasi lebih lanjut.
• Tegangan operasi: 400 V, 3 fase, 50 Hz
• Tegangan kontrol: 230 V, 50 Hz; 24 V AC
• Arus nominal motor: 61 A
Cpjdpfx Aajx D Rnde Tew
• Arus nominal pemanas: 58 A
• Arus nominal total: 119 A
• Total daya terpasang: 78 kW
• Kalibrasi (tahun): 2027
Iklan kecil
Jerman
11.248 km
Arburg 820 S 4000 - 2100
Arburg820 S 4000 - 2100
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jam operasional: 37.049 h, gaya penjepit: 4.000 kN, berat keseluruhan: 21.000 kg, This Arburg 820 S 4000 - 2100 injection moulding machine was manufactured in 2016. It features a clamping force of 4000 kN, a screw diameter ranging from 60 to 100 mm, and a maximum shot weight of up to 1860 g. The machine is equipped with a SEPRO SR AXESS 30 S3 robot and offers a hydraulic pump drive power of 55 kW. Ideally suited for high-precision plastic injection moulding applications. Please contact us for more information about this machine.
Clamping unit
• Max. locking force: 150 kN
• Max. opening force: 100 kN / increased: 800 kN
• Max. opening stroke: 700 mm
• Min. mould height: 350 mm
• Max. platen distance: 1050-1550 mm
• Tie bar spacing (clear): 820 × 820 mm
• Mould mounting platens (W × H): 1171 × 1171 mm
• Max. mould half weight: 4500 kg
• Max. ejector force: 100 kN
• Max. ejector stroke: 250 mm
Hydraulics / Drive / Miscellaneous
• Hydraulic pump drive power: 55 kW
• Total installed power:
• 4000-2100: 88.9 kW
• 4000-3200: 96.2 kW
• Colour: Plastic-coated structure (light grey / mint green / rapeseed yellow)
• Control cabinets: Safety standard DIN EN 60204
• Combined power sockets: 1 Schuko + 1 Cekon
• Injection unit power supply: 1 × 16 A
Injection unit
• Effective screw length (L/D): 23/20/17.5 | 70/80/90 | 23/20/18
• Screw diameter (mm): 60/65/70 | 80/90/100 | 60/65/70
• Max. theoretical shot volume (cm³): 792/1078/1407 | 2513/3462/4240 | 1132/1608/2036
• Max. shot weight (g PS): 293/384/1826 | 1255/1469/1860 | 820/1167/1477
Cpsdpoydpvbofx Aa Tow
• Max. injection pressure (bar): 2500/2000/1530 | 2500/1500/1200 | 2500/2000/1530
• Max. injection rate (cm³/s): 294/362/400 | 812/1030/1250 | 312/396/440
• Max. injection rate with accumulator (cm³/s): 354/450/502 | 1188/1552/1964 | 375/475/528
• Back pressure positive/negative (max., bar): 350/50 | 350/50 | 350/50
• Max. screw surface speed (m/s): 0.38 | 0.28 | 0.28
• Max. screw torque (Nm): 2057/2247/2247 | 6757/80 | 2057/2247/2247
• Max. nozzle contact force: 110 kN
• Max. nozzle stroke: 600 mm
• Heating zones / heating power: 6 × 4500 + 3300 | 6 × 5500 + 4300
• Installed nozzle heater: 1000 W | 1250 W
Dimensions and weights (basic machine)
• Clear length: 490 mm
• Electrical connection (fusing) motor + heating: 250 A
• Electrical connection (fusing) motor: 125 A
• Electrical connection (fusing) heating: 50 / 63 A
Additional equipment
• SEPRO SR AXESS 30 S3 robot (2008)
Iklan kecil
Italia
11.248 km
Negri Bossi ELE 80
Negri BossiELE 80
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, gaya penjepit: 800 kN, el
Cjdpfx Aeyn E E Tsa Topw
Iklan kecil
Hungaria
11.248 km
Krauss Maffei 250 - 1000 CX
KraussMaffei250 - 1000 CX
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 44.678 h, gaya penjepit: 2.500 kN, This Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine was manufactured in 2017. It features a clamping force of 2,500 kN and a maximum mould weight of 3,430 kg. The machine is equipped with an LRX 150 linear robot for enhanced automation. Consider the opportunity to purchase this Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine. Contact us for further details.
• Tie bar spacing (H x V): 630 x 630 mm
Cpedpsyhbq Esfx Aa Tjw
• Dimensions of clamping plate: 995 x 1050 mm
• Minimum mould installation height: 330 mm
• Distance between platen plates: 1,150 mm
• Max. mould weight: 3,430 kg total (fixed side: 1,715 kg / moving side: 2,286 kg)
• Core pull control: 4 units (2 x fixed platen / 2 x moving platen)
• Shut-off nozzle: 4-fold hydraulic cascade
• Injection unit 1 (Code 1000):
• Screw diameter: 55 mm
• Injection pressure: 1,904 bar
• Shot volume: 523 ccm
• Shot weight (PS): 476 g
• Injection rate (PS): 404 g/s
• Armoured unit: Yes (ZE 33.00)
• Printer interface: Yes
• Condition: Well-maintained and serviced
Additional equipment
• Automation: LRX 150 linear robot with B/C axis combination (KM LRX 150 linear robot included)
• Hot runner control: 12 zones
• Cooling: 4 x HB 100
Iklan kecil
Hungaria
11.248 km
Krauss Maffei 420 - 3000 CX
KraussMaffei420 - 3000 CX
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jam operasional: 70.936 h, gaya penjepit: 4.200 kN, diameter sekrup: 80 mm, This hydraulic injection moulding machine Krauss Maffei 420 - 4300 CX was manufactured in 2012. It features a clamping force of 4200 kN and a platen size of 1200 mm x 1200 mm. The machine is equipped with an injection unit featuring a screw diameter of 80 mm and an injection pressure of 2205 bar. Please enquire about the possibility of purchasing this Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine. Contact us for further details.
• Tie bar spacing (H x V): 800 x 800 mm
• Platen dimensions (H x V): 1200 x 1200 mm
• Minimum mould installation height: 380 mm
• Opening stroke: 1020 mm
• Daylight (distance between platens): 1400 mm
• Max. mould weight:
• Fixed side (DS): 3350 kg
• Moving side (AS): 4460 kg
• Total listed: 6700 kg
• Ejector:
• Stroke: 250 mm
• Force: 95 kN
• Retraction force: 48 kN
• Pneumatic ejector: No
• Core pulls: 2 on the moving side (AS) + 2 on the fixed side (DS)
• Shut-off nozzle: 2-stage hydraulic cascade
• Injection unit 1:
• Type: SP 4300
• Screw diameter: 80 mm
Cpjdpfsyhby Hsx Aa Tsw
• Injection pressure: 2205 bar
• Shot volume: 1810 ccm
• Shot weight (PS): 1647 g
• Injection rate (PS): 498 g/s
• Plasticising throughput: 106 g/s
• Screw L/D ratio: 22.5
• Nozzle radius: 12 mm
• Armoured injection unit: Yes
Additional equipment
• KM linear robot, year of manufacture: 2021
• Hot runner control, 12 zones
• Tool sensors: Priamus (p=2 / t=0)
Iklan kecil
Austria
11.248 km
Engel Victory VC1800/300 P
EngelVictory VC1800/300 P
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 101.500 h, gaya penjepit: 3.000 kN, berat keseluruhan: 19.700 kg, Hydraulic injection moulding machine from 2007. This ENGEL Victory VC1800/300 P features a clamping force of 3,000 kN and a maximum opening stroke of 900 mm. It is equipped with a robust control system featuring a 15" TFT touchscreen and a maximum injection pressure of 1,735 bar. If you are looking for a high-quality injection moulding machine, consider the ENGEL Victory VC1800/300 P offered for sale here. Please contact us for further details. An identical ENGEL Victory VC1800/300P (2008 model) is also available – same specifications.
• Power supply: 3 x 400 V + N + PE / 50 Hz
• Control unit: ENGEL CC200 A02 (15" TFT touchscreen)
• Opening stroke: 900 mm
• Maximum daylight between platens: 1,500 mm
• Minimum mould height: 600 mm
• Ejector stroke: 200 mm
• Ejector force: 90 kN
• Pump drive power: 37 kW
• Injection unit version: M3
• Available screw diameters: 60 / 70 / 80 mm
• Installed screw diameter: 70 mm
• Maximum shot volume (70 mm): 1,039 cm³
• Maximum screw speed: 226 rpm
• Injection flow rate (70 mm): 385 cm³/s
• Specific injection pressure (70 mm): 1,442 bar
• Maximum injection pressure (boosted): 1,735 bar
• Nozzle stroke: 500 mm
• Nozzle contact force: 110 kN
• Operating hours: 101,500 h
Cpodpfx Aoyn Ntzea Tow
• Maintenance/service history:
- Complete replacement of hydraulic hoses in 2025
- Motor and planetary gearbox replaced in 2021
- High-pressure cylinder replaced in 2020
- Several major, high-cost components renewed in recent years
Additional equipment:
• Robot: ENGEL ERC 64 (included)
• Axis travel: X 1,200 mm, Y 1,300 mm, Z 3,600 mm
• B-axis rotation: -90° to +270°
• Vacuum circuits: 4
• Pneumatic circuits: 8
• Reject/quality conveyor belt
• Box transfer for 600 x 400 x 250 mm containers
• GWK temperature control unit (optional)
Iklan kecil
Polandia
11.248 km
Krauss Maffei 420-3000 CX
KraussMaffei420-3000 CX
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, gaya penjepit: 4.200 kN, diameter sekrup: 80 mm, berat injeksi: 1.464 g, tinggi total: 2.500 mm, berat keseluruhan: 25.500 kg, produsen pengendali: KRAUSS MAFFEI, model controller: MC5, panjang produk (maks.): 7.300 mm, This Krauss Maffei 420-3000 CX was manufactured in 2011. The robust hydraulic injection moulding machine from Germany features a clamping force of 4,200 kN and a screw diameter of 80 mm. It supports a shot weight for PS of 1,464 g and an injection rate of 478 cm³/s. With a dry cycle rate of 1,200 cycles/h, it is ideally suited for high-volume production. Contact us for more information about this machine.
• Electrical Data:
• Power supply: 400 V / 3N~ / 50 Hz
• Installed heating capacity: 36 kW
• Rated power of pump motor: 75 kW
• Number of barrel heating zones: 7
• Performance and Control:
• Dry cycle (Euromap 6): 1,200 cycles/h
• Control system/version: MC5 3.3
Csdpfx Asydnp Hsa Tepw
• Machine colour: grey / white / blue
• Clamping Unit:
• Mold opening force: 249.6 kN
• Distance between tie bars: 800 × 800 mm
• Force of moving platen (open/close): 124.7 / 102.4 kN
• Platen dimensions: 1,270 × 1,200 mm
• Mold opening stroke: 1,020 mm
• Minimum mould height: 380 mm
• Ejector stroke: 250 mm
• Moving platen travel: 1,400 mm
• Injection Unit:
• Nozzle tip radius: 15 mm
• Nozzle aperture diameter: 6 mm
• Injection pressure: 1,856 bar
• Injection volume: 1,608 cm³
• Injection capacity: 478 cm³/s
Iklan kecil
Jerman
11.248 km
Arburg 520S-1500-400
Arburg520S-1500-400
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jam operasional: 13.361 h, gaya penjepit: 1.600 kN, diameter sekrup: 45 mm, produsen pengendali: ARBURG, This Arburg 520S-1500-400 injection molding machine was manufactured in 2016. It features a clamping force of 1600 kN, a screw diameter of 45 mm, and a servo-driven dual-circuit pump system for precise movements. The SELOGICA direct control with a 15-inch touchscreen enhances user convenience. Take advantage of this opportunity to purchase this hydraulic Arburg 520S-1500-400 injection molding machine. Contact us for further details.
• Programmable and controlled clamping force build-up; advanced two-stage clamping program
• Hydraulic, servo-driven ejector on moving platen
• Screw diameter: 45 mm (without nozzle)
• High-wear resistant version; sintered metal non-return ring; CrN coating on screw and non-return ring
• Suitable for abrasive, corrosive, and high-temperature resistant thermoplastics
• Technology level 2: servo-driven dual-circuit pump system with two regulated hydraulic pumps for precise, parallel movements
• Programmable nozzle contact force and holding pressure
• Continuous oil circulation with additional cooling and filtration
• SELOGICA direct control with touchscreen process editor
Cpsdpeyg I Egsfx Aa Tsw
• 15-inch (38.1 cm) display; multilingual interface (German, English, local language)
• Heating power zones 1-6: 3.6 kW each (230 V / 16 A)
• Cylinder heating temperature up to 450 °C
• OPC UA interface (MES/host computer connection)
• USB and CompactFlash interfaces for data storage
• Pneumatic supply with pressure regulator
• Cooling water distribution with adjustable circuits and flow indicators
• Electrical: 400 V / 50 Hz, with neutral conductor
• Operating hours: 13,361
Additional equipment
• None listed
• Robot/automation readiness: EUROMAP 67 robot interface; prepared for ARBURG MULTILIFT robot system
Iklan kecil
Jerman
11.248 km
DEMAG Systec 210/580-840
DEMAGSystec 210/580-840
Hubungi
Tahun pembuatan: 2019, Kondisi: siap digunakan (bekas), This DEMAG Systec 210/580-840 was manufactured in 2019. It is a hydraulic injection moulding machine with a clamping force of 210 tons and a power rating of 60 kW. The machine has operated for 31,132 hours. Consider the opportunity to purchase this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Contact us for further information.
• The dosing unit (orange section) is not included.
Cjdsx D Nluspfx Aa Tepw
• Integrated socket combination, country-specific
• Disconnectable via main switch and shutdown program
• 2 x Schuko 1Ph/230V/16A; 2 x IECEE 3Ph/400V/16A residual current circuit breaker
• Pneumatic 5/2 valve no. 1 on the moving mould mounting platen;
• Programmable, supply via central air connection
• Including hoses. Inputs and outputs are freely programmable; 3 inputs and 3 outputs;
• Terminal outside of the control cabinet
• Interface for additional nozzle heating band; socket only
• 2-circuit core pull via directional control valve on moving platen; Q-independent (programmable);
• With pilot-operated non-return valves to prevent core drift
• Mould mounting dimensions E (similar to Euromap March 96)
• With lateral ejector plate, locating diameter of fixed platen: 160 mm
• Locating diameter of moving platen:
• Increased mould installation height by 100.0 mm
• Min: 340 mm
• Max: 790 mm
Iklan kecil
Jerman
11.248 km
SUMITOMO SHI DEMAG El-Exis S 250/630-1450
SUMITOMO SHI DEMAGEl-Exis S 250/630-1450
Hubungi
Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), en-GB
Cpedpfox D Rqrjx Aa Tow
Iklan kecil
Jerman
11.248 km
FANUC Roboshot S150iA
FANUCRoboshot S150iA
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, jam operasional: 45.109 h, diameter sekrup: 36 mm, berat keseluruhan: 4.400 kg, produsen pengendali: FANUC, FANUC Roboshot S150iA ini diproduksi pada tahun 2015. Ini adalah mesin cetak injeksi elektrik dengan gaya penutupan 150–180 ton dan diameter sekrup 36 mm. Beratnya 4,4 ton dan beroperasi dengan daya listrik 200 V∼50/60 Hz atau 220 V∼60 Hz. Pertimbangkan untuk membeli mesin cetak injeksi elektrik FANUC Roboshot S150iA ini. Hubungi kami untuk informasi lebih lanjut.
Cedox S Slcopfx Aa Topw
• Daya listrik: 200 V, 50/60 Hz; 220 V, 60 Hz
• Unit pemilih: tidak
• Jarak tie bar: 560 x 510
• Pelat tunggal: ya
Iklan kecil
Italia
11.248 km
Other PUR-33-L
OtherPUR-33-L
Hubungi
Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), Other machine from 2007. This Barberan PUR-33-L is a continuous wrapping line designed for applying PVC foil, CPL, paper, and veneer onto various materials using hot-melt adhesive technology. It features a robust, one-piece, electro-welded steel frame, motorized rubber-coated feed wheels, and a slot-die extrusion system for precise adhesive application. If you are looking for high-quality wrapping solutions, you should consider the Barberan PUR-33-L machine we have for sale. Contact us for further details.
• Base Frame: One-piece, electro-welded steel frame with high structural rigidity. Designed to absorb vibrations and maintain the alignment of the pressure rollers.
• Transport System: Motorized, rubber-coated transport wheels with inverter-controlled speed, ensuring precise synchronization between glue application and profile feeding.
• Press/Calender Zone: Universal supports and multiple pressure rollers in various shapes and hardness levels, suitable for complex profile geometries.
• System Type: Slot-die extrusion system with adjustable lips.
• Working Width: 330 mm.
Cpsdsym U Dijpfx Aa Tew
• Glue Application Accuracy: Consistent gram-per-square-meter distribution, irrespective of line speed. Closed system reduces oxidation, prevents premature PUR curing, and minimizes material waste.
• Adjustment: Micrometric lip setting for precision control of adhesive film thickness.
• Type: 20 kg PUR drum melter with heated plate, where only the top layer is melted to maintain the chemical integrity of the remaining adhesive.
• Sealing System: Airtight design with special seals to prevent the ingress of air/moisture.
• Pump: Integrated gear pump for steady, pulsation-free adhesive flow to the application head.
• Function: Maintains the adhesive’s working temperature during transfer from the melter to the slot-die head at around 120-150°C.
• Length: 4.5 meters.
• Technical Features: Internal core made from PTFE (Teflon), resistant to high pressure and PUR. Includes a uniform electric heating element to avoid cold spots, high-efficiency thermal insulation, an integrated thermocouple, and temperature control via the machine’s PLC.
Iklan kecil
Republik Ceko
11.248 km
Arburg Allrounder 920H 5000-4600
ArburgAllrounder 920H 5000-4600
Hubungi
Tahun pembuatan: 2020, Kondisi: siap digunakan (bekas), berat keseluruhan: 28.400 kg, arburg-allrounder-920h-2020-en
Codjx U Tqropfx Aa Tepw
Segel kepercayaan
Dealer resmi yang disertifikasi oleh Machineseeker

Iklan kecil
Rumania
11.248 km
SCM Class SI 400EP
SCMClass SI 400EP
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, Platen saw SCM kelas SI 400EP ini diproduksi pada tahun 2019. Mesin ini memiliki diameter mata gergaji maksimal 400 mm dan lebar potong pada penggaris paralel hingga 1500 mm. Gergaji format ini menawarkan kapasitas potong sudut hingga 3800 mm. Ideal untuk pemotongan panel kayu secara presisi. Hubungi kami untuk informasi lebih lanjut.
• Kondisi mesin: Sangat baik
• Diameter mata gergaji maksimal (dengan scorer terpasang): 400 mm
• Tinggi mata gergaji maksimum di atas meja pada 90° / 45°: 140 / 97 mm
• Lebar potong pada penggaris potong memanjang: 1000 - 1500 mm
• Kapasitas stroke gergaji sliding maksimal: 3200 - 3800 × 3200 mm
Cedpfsyabkvox Aa Tjpw
• Motor tiga fasa: mulai dari 7 kW (8 kW) / 50 Hz (60 Hz)
Iklan kecil
Jerman
11.248 km
Engel Duo 740 H / 740 M / 500 WPX combi M
EngelDuo 740 H / 740 M / 500 WPX combi M
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, jam operasional: 14.674 h, diameter sekrup: 45 mm, produsen pengendali: ENGEL, model controller: CC300 microcomputer, This Engel Duo 740 H / 740 M / 500 WPX combi M injection moulding machine was manufactured in 2019. It features a compact two-platen design, a minimal footprint, and intelligent servo hydraulics for reduced energy consumption. The machine is equipped with a CC300 microcomputer control system, including a 21.5-inch full HD touchscreen, and an advanced material package suitable for thermoplastics up to 350°C. For further information about this injection moulding machine, please contact us.
Additional Equipment
• Mould heating: 32 control circuits, max. heating capacity 60 kW
• Vacuum compressed air circuits: with venturi nozzle and pressure switch
• Air solenoid valves: 2/2-way, R1/2 inch
• Autoprotect injection monitoring: self-learning system for mould protection
• Advanced material package: for thermoplastics up to 350°C, max. reinforcement level 30%
Machine Advantages
Qualitative Machine Benefits
• High-precision and sensitive mould protection
• Advanced control system with 21.5" full HD touchscreen and user authorization system
Technical Machine Benefits
• Clamping plate stroke: 1800 mm
Cpsdjx Nr Tnjpfx Aa Tew
• Max. distance between clamping plates: 2650 mm
• Mould installation height: min. 850 mm, max. 1740 mm
• High operational safety due to robust platen guidance and precise platen parallelism
• Energy efficient with reduced power consumption and intelligent servo-hydraulics (Engel ecodrive)
• Multi-circuit hydraulics for simultaneous movements (ejector, core pull, nozzle)
Additional Information
Machine still under power
Iklan kecil
Italia
11.248 km
Milacron ELEKTRON 75
MilacronELEKTRON 75
Hubungi
Tahun pembuatan: 2011, Kondisi: siap digunakan (bekas), berat keseluruhan: 4.700 kg, tinggi total: 1.950 mm, This Milacron ELEKTRON 75 was manufactured in 2011. It features a screw diameter ranging from 18 to 32 mm and a clamping force of 750 kN. The machine’s dimensions are 4.36 × 1.42 × 1.95 m and its weight is 4700 kg. If you are looking for a high-quality injection moulding machine, you should consider the Milacron ELEKTRON 75, which we have available for sale. Please contact us for more information on this machine.
Cpodpfjx D N D Djx Aa Tew
Additional information:
• Clamping force: 750 kN
• Injection unit: 300
• Screw diameter (mm): A 18 / B 25 / C 32
• Injection pressure (bar): A 2500 / B 1943 / C 1488
• Shot volume (cm³): A 103 / B 140 / C 183
• Shot weight (PS g): A 113 / B 154 / C 201
• Injection rate (cm³/s): A 117 / B 159 / C 208
• Screw stroke (mm): 165
• Screw L/D ratio: 25
• Plasticising capacity (g/s): A 9.2 / B 11.2 / C 11.2
• Screw speed (rpm): 125
• Tie-bar distance: 575 × 570 mm
• Platen size: 750 × 765 mm
• Min. mould height: 250 mm
• Max. mould height: 480 mm
• Opening stroke: 320 mm
• Max. daylight: 800 mm
• Ejector stroke: 150 mm
• Ejector force (kN): 25
• Distance between platen holes: 405 × 380 mm
• Max. tool weight (kg): 400
• Number of core pulls: 4 + 1
• Nozzle radius: R = 300 mm
• Nozzle opening: Ø 48 mm
• Hydraulic oil capacity: 97 / 130 l
• Mounting thread size: M10
Dimensions:
Machine depth: 4360 mm
Iklan kecil
Jerman
11.248 km
Arburg 470 S 800-170
Arburg470 S 800-170
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, diameter sekrup: 25 mm, Arburg 470 S 800-170 ini diproduksi pada tahun 2010. Mesin injection moulding hidrolik ini memiliki gaya penutupan 80 ton dan jarak antar batang pengikat 470x470 mm. Mesin beroperasi pada 400 V 3~ 50 Hz dengan total daya terpasang 76 kW. Pertimbangkan untuk membeli mesin injection hidrolik Arburg 470 S 800-170 ini. Silakan hubungi kami untuk informasi lebih lanjut.
Cedpfox D R Epox Aa Tepw
• Jarak antar batang pengikat: 470x470 mm
• Plat penjepit tunggal: Ya
• Tegangan operasi: 400 V 3~ 50 Hz
• Tegangan kontrol: 230 V ~ 50 Hz, 24 V DC
• Arus nominal motor/pemanas: 76 / 59 A
• Total arus nominal: 135 A
• Total daya terpasang: 76 kW
Kami memudahkan pencarian untuk Anda: "platen"
Anda akan menerima penawaran baru melalui email secara langsung dan gratis.
Anda dapat mengakhiri tugas pencarian kapan saja.
Bekas Platen (698)
Sekarang telusuri seluruh Machineseeker dengan lebih dari 200.000 mesin bekas.Jelajahi nama mesin paling populer:

Informasi sekarang
+44 20 806 810 84
+44 20 806 810 84
Pasang iklan sekarang
*per iklan/bulan





































































































































































