Beli Plum bekas (208)

Kondisi: baru, Capacity 750 kg Maximum workpiece size 900 x 300 mm Total workpiece weight 550 kg Max. workpiece weight 30 kg/piece Rotational speed 22 rpm Filling level 50-60% Colour blue RAL 5015 Opening 1775 x 440 mm Total power requirement 3 kW Machine weight approx. 1,995 kg Required space approx. 2.9 x 1.33 x 1.75 m New drum-type deburring or descaling machine for safe and efficient deburring of workpieces. Suitable for heavy-duty applications. Hexagonal drum lined with durable, vulcanised rubber (thickness: 36 mm), cover with gas struts, roller shutter for protection against rotating drum, robust design, easy operation. Control via timer on the control panel, main and emergency stop switches. The maximum filling quantity is 40% of the drum volume and corresponds to 750 kg, consisting of 550 kg of workpieces + 200 kg of deburring media = hardened manganese balls (200 kg included) or cast iron pentagons. These are available from Sideros. Optional accessories: Stepless speed control via frequency inverter approx. 13-22 rpm (3,200 €) Prodev S Iq Aepfx Ab Hjc Sound enclosure (65/70 dB), see photo 9, and Sideros ECO B2 dust extraction unit, see photo 8, available at extra cost. The manufacturer recommends that, for complex workpieces, 100 kg of sample parts of the material to be deburred are sent to the factory for testing prior to ordering. Otherwise, the manufacturer cannot assume responsibility for the result of the deburring process. VIDEO available on our website. Warranty = 12 months for single-shift operation. If replacement parts are supplied, the defective parts must be returned. Downtime of the machine is not covered. STOCK-HOLDING DEALER WITH 1,600 m² SHOWROOM.

Kondisi: bekas, Tahun pembuatan: 2015, jam operasional: 2.354 h, kapasitas angkut: 3.000 kg, tinggi angkat: 3.190 mm, tipe tiang: standar, tinggi konstruksi: 2.205 mm, lebar kerangka garpu: 1.145 mm, panjang garpu: 1.200 mm, berat kosong: 5.035 kg, jenis penggerak: Elektro, lebar konstruksi: 1.145 mm, Electric 4-wheel forklift Load center: 500 mm Fork width: 120 mm Fork thickness: 50 mm ISO class: ISO Class 3 = 2,500 – 4,999 kg Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Non-marking Front tires size: 225/75-10 Front tires condition: 40 – 60% Rear tires type: Non-marking Rear tires size: 200/50-10 Rear tires condition: 60 – 80% Battery voltage: 80V Battery capacity: 500Ah Battery manufacturer: SBS Battery type: PzS Battery year of manufacture: 2015 Battery condition: 40 – 60% Description: Fully enclosed cab with heating, front and rear work lights, 3rd and 4th valve plumbed to carriage, rotating beacon, 2x cross levers, two-pedal system, sun visors, side shifter, 3rd valve, 4th valve, rear work light, front work light, heating, full cab, non-marking tires, interior mirror, joystick, rotating beacon, wiper, seat heating, LED lighting, seat, Predpfx Ajt Ddu Dsb Hsc

Kondisi: baru, tiny-house-model-freedom--the-tiny-house-freedom-by-wolf-tiny-co mbines-modern-design-premium-functionality-and-homely-comfort-in- a-compact-footprint.-with-a-spacious-veranda-and-light-filled-int eriors-this-model-offers-the-perfect-blend-of-style-comfort-and-f lexibility. _____ why-choose-the-freedom-model? the-tiny-house-freedom-is-ideal-for-anyone-seeking-a-compact-hig h-quality-and-mobile-living-solution.-the-smart-interior-layout-a nd-extensive-glass-front-create-an-open-and-welcoming-atmosphere. _____ highlights-at-a-glance: ✅-large-glass-fronts--maximum-natural-light-for-bright-inviting- living-spaces. ✅-timber-veranda--the-perfect-outdoor-area-for-relaxation-and-en joyment. ✅-premium-interior--fully-equipped-kitchen-and-modern-bathroom. ✅-high-quality-materials--robust-steel-frame-and-natural-timber- cladding-for-timeless-elegance. ✅-compact-&-mobile--easy-to-transport-and-usable-anywhere. Predpfownxnpox Ab Hjc _____ technical-specifications---tiny-house-freedom •-dimensions: o-width--3.00-m o-length--7.00-m o-height--3.00-m •-layout: o-open-living-area-with-kitchen-and-bathroom. o-optional--large-timber-veranda-to-extend-the-living-space-outd oors. •-windows--generous-energy-efficient-glazing-for-light-filled-in teriors. •-insulation--high-quality-sandwich-panels-guarantee-optimal-cli mate-in-all-seasons. •-materials: o-exterior-cladding--natural-timber-durable-and-stylish. o-interior--combination-of-timber-and-modern-white-accents. _____ interior---perfection-in-comfort-and-functionality the-tiny-house-freedom-impresses-with-its-efficient-use-of-every -square-metre: 1.-living-area--space-for-a-sofa-a-small-table-or-a-workstation. 2.-kitchen--custom-built-fitted-kitchen-with-premium-cabinets-si nk-and-storage. 3.-bathroom: o-modern-shower o-wc-and-washbasin o-practical-and-contemporary-design. 4.-timber-veranda--welcoming-outdoor-space-for-cosy-hours-outsid e. _____ versatile-applications the-tiny-house-freedom-is-ideal-for: 🏠-living-space--perfect-home-for-minimalists. 💼-home-office--a-quiet-place-to-work-with-a-view-of-nature. 🌿-holiday-home--a-stylish-retreat-for-leisure-time. 👥-guest-house--comfortable-overnight-accommodation-for-your-visi tors. 🍴-café-or-retail-space--flexible-use-for-catering-or-commercial- purposes. _____ optional-accessories 1.-water-boiler-(incl.-installation-&-sealing)-–-€714.00 2.-wc-window-(60x40-cm-incl.-installation)-–-€255.00 3.-urinal-(incl.-installation-&-plumbing)-–-€408.00 4.-automatic-ventilation-–-€250.00 5.-frost-monitor-–-€86.70 6.-heating-(electric-1500-2500-w-incl.-installation)-–-€285.60 7.-additional-floor-drain-–-€120.00 8.-external-cee-socket-(incl.-cable-&-installation)-–-€175.00 9.-colour-of-choice—full-body-paintwork-–-€969.00 10.-colour-of-choice—frame-only-–-€750.00 tiny-house-freedom—your-modern-flexible-and-stylish-home-for-any -requirement!-🌟

Tahun pembuatan: 2024, Kondisi: baru, Stone Fruit Destoning and Pulping Line with Interchangeable Screens and Adjustable Rotor. Suitable for pulping stone fruits, berries, and other fruits. Mash and pits are discharged separately. Screens can be swapped quickly and easily. The machine is supplied with one screen; additional screens are available upon request. Technical Data: - Rated capacity: 1,000–5,000 kg/h - Power requirement: 11 kW, 400 V, 32 A, three-phase - Material: W.-Nr. 1.4301, AISI 304 stainless steel - Dimensions: 1,450 × 1,650 × 1,850 mm - Discharge height: 300 mm - Feed height: 1,750 mm - Weight: 190 kg - Electronics rated IP65 - Machine compliant with EU directives - Minimal maintenance - User-friendly operation - Easy to clean - 2 swivel castors and 2 fixed castors / 4 vibration-damping machine feet - Food-grade rubber wipers The machine features two processing zones: first, the destoning of the fruit; second, the pulping process. Podpfx Abjd Aqzdj Herc The price includes one selected screen. Optional equipment: - DN 65 outlet for mash pump - Frequency converter - Screens: - 0.8 mm: Berries - 1.5 mm: Berries, purée - 3 mm: Apple, pear - 5 mm: Cherry, sour cherry - 8 mm: Plum, apricot - 10 mm: Peach - Custom fabrication

Tahun pembuatan: 1996, Kondisi: sangat baik (bekas), Ferrum Vrsta: Automatska mehanička odstranjivačica koštica za trešnje ili šljive Prodet Rr Ncspfx Ab Hoc Model: EA sa 40 ploča Kućište: lijevano čelično Dimenzije (D x Š x V): 3.100 x 1.450 x 1.800 mm Težina: 1.600 kg Napajanje: 380 V – 50 Hz – 2,5 kW Alati: 22 mm/12 mm, 108 otvora

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, For sale: Equipment from a timber frame house production facility MBA production line: - CNC frame assembly station - 2x multifunctional bridges, extensively equipped - Butterfly table - Processing station - Uprighting table 3x Riedex extraction units Stromab CT600 saw, 13 m, with cutter 3x ID-Lifting manual vacuum lifters Additionally: hand tools, 2x forklift trucks Predpevdkubefx Ab Hec Other smaller items included. All equipment in the facility is from 2021 or newer.

Kondisi: baru, Capacity 750 kg Maximum workpiece size 900 x 300 mm Total workpiece weight 550 kg Prodpfxsvv H Tde Ab Hec Maximum individual workpiece weight 30 kg / piece Rotational speed 22 rpm Filling level 50-60% Color blue RAL 5015 Opening 1775 x 440 mm Total connected load 3 kW Machine weight approx. 1995 kg Required space approx. 2.9 x 1.33 x 1.75 m New rotary drum deburring machine suitable for safe and efficient deburring of workpieces. Designed for HEAVY DUTY applications. For light to medium workpieces, the EVO model is available. Six-sided drum lined with durable, vulcanized rubber (thickness 36 mm). Closure lid with gas struts, roller shutter for protection against the rotating drum, robust design, easy operation. Timer control on the control panel, main and emergency stop switches. Maximum filling volume is 40% of the drum capacity, corresponding to 750 kg (550 kg of workpieces plus 200 kg of deburring media: hardened manganese balls (200 kg included – see photo 6) or cast iron pentagons (see photo 7). These can be procured via Sideros. Infinitely variable speed control via frequency converter approx. 13–22 rpm (additional cost: €3,200). Soundproof enclosure (65–70 dB, see photo 9) and Sideros ECO B2 dust extraction unit (see photo 8) available at extra charge. The manufacturer recommends sending 100 kg of sample workpieces for testing before ordering in the case of complex parts to be deburred. Otherwise, no responsibility can be accepted for the deburring result. Video available on our website. Warranty: 12 months for single-shift operation. When replacement parts are shipped, defective components must be returned. Downtime is not covered. STOCKING DEALER WITH 1,600 m² SHOWROOM.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, jenis bahan bakar: bensin, kapasitas tangki bahan bakar: 10 l, warna: kuning, berat operasi: 500 kg, daya angkat: 350 kg/m, tinggi angkat: 1.600 mm, Tahun pembuatan: 2025, Perlengkapan: penggerak semua roda, The KINGWAY HERACLES H130 is a surprisingly compact machine with extensive capabilities, featuring a hydrostatic 3WD drive system. Thanks to its small dimensions and a turning radius of just 993 mm, it boasts exceptional maneuverability, enabling work in confined spaces. Powered by a robust 16.8 kW RATO engine, it delivers high performance while meeting stringent environmental standards (EU Stage V & EPA Tier 4 Final). The machine comes equipped with a mounting plate compatible with 'Avant' and 'Multione' type attachments, increasing its versatility. With a maximum lifting capacity of 350 kg and a tipping load of 400 kg, it is ideally suited for agriculture, construction, as well as larger private estates. Its low operating weight of 500 kg and easy transport capability make it the perfect solution for users seeking a mobile and multi-purpose machine. The KINGWAY HERACLES H130 is perfectly tailored to agricultural enterprises, construction companies, electrical and plumbing services, as well as renovation firms and similar service providers. We also provide tailor-made aftersales service once the warranty period expires. The machines are manufactured under the supervision of European technicians, based on a robust design that ensures reliable operation under all conditions. TECHNICAL SPECIFICATIONS: Model: H130 Operating Weight: 500 kg Lifting Height: 1600 mm Engine: RATO R740D Fuel Type: Petrol Cylinders: 2 Engine Displacement: 740 cm³ Emission Standard: EU Stage V & EPA Tier 4 Final Max Engine Power: 16.8 kW @ 3600 rpm Max Torque: 47 Nm @ 2500 rpm Cooling System: Air-cooled Operating Voltage: 12 V Battery: 20 Ah Max Tipping Load: 400 kg Max Lifting Capacity: 350 kg Operator Cabin: None Travel Speed: 0~15 km/h Steering Angle: 0~360° Turning Radius (inside/outside): 0/993 mm Standard Tires: 18×9.50-8 Fuel Tank: 10 l Hydraulic Oil Tank: 10 l Hydraulic Flow Rate: 29 l/min Hydraulic Pressure: 160 bar Transmission Type: Hydrostatic Length: 1854 mm Width: 993 mm Bucket Width: 1000 mm Height: 1304 mm NOTE: THE MACHINE IS FITTED WITH DIFFERENT TIRES THAN SHOWN IN THE MAIN PHOTOS. THE CURRENT TIRES ARE DEPICTED IN THE LAST TWO IMAGES. PRICE: Net: €6,600 Gross: €7,854 WARRANTY: Every machine is covered by a 12-month warranty, which can be extended for an additional year. After expiry of the warranty period, we guarantee our customers access to all spare parts. SERVICE: We operate our own mobile service network, offering coverage for all our customers within and outside Germany. Prjdpfxswifvco Ab Hoc KINGWAY is the leading and largest importer of construction and agricultural machinery in Europe. With 25 years of experience on the European market, we import and sell approximately 3,000 to 4,000 machines annually, earning the trust of numerous customers.

Kondisi: baru, 8-unit WC Container | 8 X (WC + washbasin) 220x400 8x WC units with washbasin, 8x entrance doors, 8x ventilation outlets Dimensions: Width: 2.20 m Length: 4.00 m Height: 2.35 m BRAND NEW! German brand quality Our service includes secure packaging and insurance. 'Wolf Tiny Container' protects you from any damages in case of problems. Direct from manufacturer Psdpfx Ajwnnvpsb Hjrc Nationwide shipping within Germany: 390 € This offer includes: • 8x WCs with washbasins • 8x entrance doors • 8x ventilation outlets • Insulation: 72 mm mineral wool roof insulation, 50 mm PUR wall insulation • Crane lifting eyes for unloading • 2–3 mm PVC vinyl flooring – durable and easy to clean Please ensure suitable unloading equipment is available (e.g. forklift, wheel loader with pallet forks, or crane) Other sizes and colours can be produced at short notice according to your specifications. Additionally, you can order the following accessories: 1. Water boiler (incl. installation & sealing): €714.00 2. WC window (60x40 cm, incl. installation): €255.00 3. Urinal (incl. installation & plumbing): €408.00 4. Automatic ventilation: €250.00 5. Frost guard: €86.70 6. Heater (electric, 1500–2500 W, incl. installation): €285.60 7. Additional floor drain: €120.00 8. CEE exterior socket (incl. cable & installation): €175.00 9. Colour of your choice – full painting: €969.00 10. Colour of your choice – frame only: €750.00

Tahun pembuatan: 2023, Kondisi: baru, Seed Removal and Pulping System with interchangeable screens and adjustable rotor. Suitable for pulping stone fruit, other fruits, and berries. The mash and pits are separately discharged. Screens can be changed easily and quickly. The unit is supplied with one screen; additional screens can be ordered as required. Technical data: • Rated output: 500-1000 kg/h • Power requirement: 2.2 kW, 400 V, 6 A, 3-phase • Material: Wnr. 1.4301, AISI 304 stainless steel • Dimensions: 650 x 1100 x 1140 mm • Weight: 100 kg • IP65 electrical control circuit • Food-safe rubber scrapers • Adjustable gap between screens and scrapers • Adjustable machine feet/swivel castors with brake Pedod Aqy Rjpfx Ab Hsrc Options: • Frequency converter • Screens available in various sizes: • Screen hole size 0.8 mm: for various berry types • Screen hole size 1.5 mm: for various berry types • Screen hole size 3 mm: for apples • Screen hole size 5 mm: for cherries • Screen hole size 8 mm: for plums and apricots • Screen hole size 10 mm: for peaches

Kondisi: baru, Capacity: 300 kg Max. workpiece size: 500 x 200 x 20 mm Total workpiece weight: 200 kg Max. workpiece weight: 15 kg / piece Rotational speed: 22 rpm Prjdpfx Abou Uu T Rs Hsc Filling level: 40-50% Colour: Blue, RAL 5015 Opening: 625 x 270 mm Total power requirement: 1.5 kW Machine weight: approx. 650 kg Dimensions (L x W x H): 1 x 1.7 x 1.29 m New deburring drum or deburring machine for safe and efficient deburring of workpieces. Hexagonal drum lined with 36 mm abrasion-resistant, vulcanised rubber, shutter for protection against the rotating container, robust design, easy to operate. Control panel with timer, hour counter, main switch, emergency stop and signal light. The maximum filling level is 40% of the container volume and corresponds to 300 kg, consisting of 200 kg of workpieces plus 100 kg of deburring media = high-manganese steel balls or cast iron pentagons. These are available from Sideros: high-manganese steel balls per 100 kg €400, cast iron pentagons per 100 kg €950. Dust extraction unit Sideros ECO A (Photo 8) available for a surcharge of €1,900 plus VAT. The manufacturer recommends sending approx. 100 kg of sample parts for testing to the factory in Italy before placing an order, in order to ensure optimal deburring results. Otherwise, the manufacturer does not assume responsibility for the deburring result. Warranty: 12 months for single-shift operation. In case of spare part shipment, defective parts must be returned. Machine downtimes are not covered. STOCKING DEALER WITH 1,600 m² SHOWROOM.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 18,8 kW (25,56 hp), jenis bahan bakar: diesel, kapasitas tangki bahan bakar: 14 l, warna: oranye, berat keseluruhan: 1.400 kg, kelas emisi: Euro 5, volume sekop: 0,03 m³, Tahun pembuatan: 2025, jam operasional: 1 h, Perlengkapan: garpu palet, sekop standar, track karet, en-GB Pedpfx Asvznl Esb Hsrc

Tahun pembuatan: 2024, Kondisi: baru, Condensation drying of air and, indirectly, of food products (such as fruit, tea, mushrooms, etc.) is the most energy-efficient method for removing moisture from various materials. This process operates on the heat pump principle—by cooling to the vapor temperature, the temperature falls below the dew point, causing condensation to form on the surface of the condenser from the ambient air's moisture. The heat extracted from the air is immediately returned to the same air, and with the addition of the electrical energy required to run the compressor, 20-30% more heat is generated. - Suitable for drying various types of fruit (apples, plums, apricots, etc.) - Digital control - Automatic venting - Equipped with stainless steel wire racks Technical Data: Podpfx Aed Atghsb Hjrc - Rated capacity: 50–100 kg per cycle - Power requirement: 1.2 kW, 230 V - Temperature range: 40–60 °C - Material: Stainless Steel, Grade 1.4301 (AISI 304) - Dimensions: 1420 x 800 x 2000 mm - Weight: 200 kg - Racks: 22 units (570 x 570 mm each) - Drying area: approx. 7.2 m² - Continuous ventilation - Insulation: 70 mm polyurethane - Closed condensate system, condensate drain - Minimal maintenance required Suitable for fruit, vegetables, spices, herbs, mushrooms, pasta.

Kondisi: bekas, Tahun pembuatan: 2010, Wheel diameter - max. 180 mm Wheel width 40 mm Module - max. 4 Podpfxevzh Nqj Ab Hsrc Module - min. 1 The M62 is a manually operated go/no-go inspection stand for checking the usual gearing parameters on transmission gears. Due to its highly precise measuring tools and robust construction, the M62 is ideally suited for quality control of gearings under workshop conditions during production. The M62 provides an accurate and robust solution for rapid inspection of transmission gear teeth after machining processes such as hobbing, shaping, grinding, and honing on the production line. MARPOSS industrial PC E9066 N with WINDOWS XP and 15" LCD display with 8 or 12 measuring ports for connecting up to 12 probes. This is a used machine, therefore we sell it under exclusion of any warranty. STOCK-HOLDING DEALER WITH OWN WAREHOUSE OF 1,600 m².

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 8,09 kW (11,00 hp), warna: oranye, berat keseluruhan: 1.000 kg, Tahun pembuatan: 2024, jam operasional: 1 h, OFFER!! Old price: €8,925 gross Now: €8,508 gross! (We also offer the larger mini excavator VIP 12 with a 3-cylinder KUBOTA engine and a total weight of 1,200 kg – now at a special price of €11,300 gross!) MINI EXCAVATOR VIP10 with articulating boom – professional and built to last. The VIP10 RS model is the perfect machine for demanding construction, electrical, plumbing, repair, and service companies in related industries. The VIP10 RS features extendable tracks and a swing boom, making it significantly easier to work in confined spaces. We also guarantee after-warranty service support. Our mini excavators are manufactured based on and under the supervision of European engineers. The machine is built on a robust structure and can operate under any conditions. BUCKETS: (3 x buckets included in the price) - 300 mm - 500 mm - 800 mm Additionally available attachments: - Tilt bucket - Auger - Grapple - Ripper - Rake - Quick coupler - Hydraulic breaker TECHNICAL SPECIFICATIONS: - Operating weight: 1,000 kg - Dig depth: 1,568 mm - Width: adjustable (approx. 800 mm – 954 mm) - Engine: Koop - Number of cylinders: 1 cylinder - Fuel: Diesel Power: 8 kW / 11 HP - Swing speed: 10.5 rpm - Gradeability: 30º - Pump type: Gear pump - Pressure: 16 MPa - Oil flow: 16.6 l/min - Color: Yellow/orange DIMENSIONS: - Wheelbase: 914 mm - Track length: 1234 mm - Upper structure clearance: 453 mm - Counterweight turning radius: 660 mm - Undercarriage width: 954/800 mm - Track width: 180 mm - Transport length: 2850 mm Pjdsvzxl Aepfx Ab Hsrc - Seat-to-ground height: 1525 mm - Overall height: 2211 mm - Arm swing left: 363 mm - Arm swing right: 325 mm WORKING RANGE: - Max. ground-level digging radius: 3039 mm - Max. digging radius: 3136 mm - Max. digging depth: 1568 mm - Max. dumping height: 1876 mm - Max. digging height: 2646 mm - Max. vertical digging depth: 1377 mm - Max. dozer blade lifting height: 141 mm - Max. dozer blade lowering depth: 200 mm - 3-circuit hydraulic system (for e.g. auger – breaker operation etc.) - LED work lights PRICE: €7,150 net €8,508.5 gross - INCLUDES 3 digging buckets (300, 500, 800) - For regularly serviced machines purchased from us, we EXTEND THE WARRANTY UP TO TWO YEARS - FREE 12-month warranty – after this period, we supply all original spare parts as needed! - FREE delivery within a 200 km radius - Tax-free sales possible (with VAT ID only) - FINANCING available - We are always at your disposal! KINGWAY DEUTSCHLAND is the only stationary distributor of the Kingway brand in Germany. Only here can you view and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and the main branch of Kingway in Germany. We have a huge range of machines in stock, with around 100 machines available at any time. We deliver machines throughout Germany, Austria, Switzerland, Italy, and other neighboring countries, and provide all spare parts and mobile service for our customers. KINGWAY DEUTSCHLAND Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Tahun pembuatan: 2024, Kondisi: baru, Condensation drying of air and, indirectly, of food products (such as fruit, tea, mushrooms, and similar items) is the most energy-efficient method for removing water from various materials. It operates on the heat pump principle – by cooling down to vapor temperature, the temperature drops below the dew point, causing the surface of the condenser to collect moisture from the air. The heat extracted from the air is immediately returned to the same air, and with the aid of the electrical energy required to run the compressor, an additional 20-30% heat is generated. - Suitable for drying various types of fruit (apples, plums, apricots, etc.) - Digital control - Automatic ventilation - Fitted with stainless steel mesh trays Technical specifications: - Rated capacity: 25–50 kg per batch - Power consumption: 0.6 kW, 230 V - Temperature range: 40–60°C - Material: stainless steel, Wnr. 1.4301, AISI 304 - Dimensions: 710 x 800 x 2000 mm - Weight: 100 kg - Trays: 11 pieces (570 x 570 mm) - Drying surface: approx. 3.6 m² - Continuous airflow - Insulation: 70 mm polyurethane Pjdpod Atipjfx Ab Horc - Closed condensate system, condensate drainage - Minimal maintenance Suitable for fruit, vegetables, spices, herbs, mushrooms, pasta.

Kondisi: baru, Sheet width 1290 mm Sheet thickness 5 mm Pre-bending yes Roll diameter 120 mm Rolling speed 1 - 6 m/min Total power requirement 1.1 kW Machine weight approx. 825 kg Three-roll plate bending machine with asymmetric roll arrangement, enabling pre-bending. New machine equipped with emergency stop wire, brake motor, foot-operated reversing switch, cambered rolls, adjustment of lower and bending roll via handwheel and worm gear, drive of upper and lower rolls via worm gear motor, stepless rolling speed control via inverter, top roll can be swung out. Swedish quality product. This new machine is also available in the following sizes: Working length from 1040 to 2540 mm, Max. sheet thickness (400 N/mm²) from 1 to 6.5 mm. Among other options, the following are available: conical bending device (see picture 2), digital display (see picture 4), motorized adjustment (see picture 5) with remote control (see picture 3), and hardened rolls. Accessories prices + VAT: + Hardened and ground rolls = EUR 2,650.00 + Digital display per axis = EUR 1,050.00 Podpovzhgpjfx Ab Hsrc + Conical bending device with diagonal adjustment of the bending roll, sliding shoe and handwheel with display = EUR 1,500.00 + Motorized adjustment of feed roll = EUR 3,550.00 + Motorized adjustment of lower roll = EUR 3,550.00 Stocking dealer with 1,600 m² exhibition hall.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, jarak tempuh: 1 km, daya: 18,39 kW (25,00 hp), jenis bahan bakar: diesel, kapasitas tangki bahan bakar: 18 l, warna: merah, berat keseluruhan: 1.100 kg, berat operasi: 800 kg, ukuran ban: 23 x 8,5-12, volume sekop: 0,3 m³, Tahun pembuatan: 2024, jam operasional: 1 h, TELESCOPIC LOADER 620T Psdpfx Aev Ilnqeb Herc Modern Telescopic Loader 620T – professional and durable. The 620T model is the ideal equipment for the most demanding construction, electrical, plumbing, renovation, and service companies in similar sectors. We also guarantee equipment service even after the warranty period has expired. The machines are manufactured based on and under the supervision of European engineers. The equipment features a robust structure, enabling operation under all conditions. With a tight turning radius and compact design, it is highly efficient in confined spaces. The lifting height of the machine is up to 2.7 m. TECHNICAL DATA and DIMENSIONS: - Bucket Capacity (CBM): 0.3 - Engine: KUBOTA - Number of Cylinders: 3 - Rated Power (kW/HP): 18.2/25 - Rated Speed [rpm]: 3000 - Length (mm): 2,195 - Width (mm): 980 - Height (mm): 2,150 - Maximum Lift Height (mm): 2,750 - Rated Load (kg): 500 - 800 - Minimum Turning Radius (mm): 1,980 - Steering Angle: 40° - Drive: hydrostatic 4 x 4 - Speed (km/h): 10 - Weight (kg): 1,100 - Tyres: 23 x 8.5-12 - Tyre Pressure: 2.8 bar - Hydraulic Oil Tank Capacity (l): 35 - Pressure: 190 bar - Hydraulic Oil Flow (l/min.): 33 - Oil Flow Tracking (l/min.): 50 - Hydraulic Oil Type: HL46 - Fuel Tank Capacity (l): 18 - Battery Capacity (Ah): 55 - Voltage (V): 12 - Multi-function Joystick: YES Included: BUCKET + FORKS + MANUAL QUICK COUPLER CE Certificate PRICE: Net: €17,479 Gross: €20,800 - INCLUDING bucket + forks + MANUAL QUICK COUPLER - For machines regularly serviced by us, we EXTEND the WARRANTY to TWO YEARS - FREE 12-month WARRANTY – after expiry we offer all original parts as needed! - FREE delivery within a 200 km radius - Sale WITHOUT VAT possible (only with VAT number) - FINANCING available - We are always at your service! KINGWAY DEUTSCHLAND is the only stationary distributor for the Kingway brand in Germany. Only here can you view and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and the main branch of Kingway in Germany. We have a huge selection of machines in stock, with around 100 machines available at all times. We deliver machines throughout Germany, Austria, Switzerland, Italy, and other neighboring countries. For our customers, we also offer access to all spare parts and mobile service. KINGWAY DEUTSCHLAND Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Tahun pembuatan: 2023, Kondisi: baru, Stone Fruit Destoning / Pulping Unit with Interchangeable Sieves and Adjustable Rotor. Suitable for processing stone fruits, soft fruits, and berries. The pulp and the pits are discharged separately. Sieves can be swapped out quickly and easily. The unit is supplied with one sieve, and additional sieves can be ordered separately. Technical Data: • Nominal capacity: 1,000–5,000 kg/h • Power requirement: 5.5 kW, 400 V, 16 A • Material: Wnr. 1.4301, AISI 304 stainless steel • Dimensions: 860 x 1820 x 1350 mm • Weight: 190 kg • IP65 electrical configuration • Food-grade rubber scrapers • Adjustable gap between sieve and scraper • Adjustable machine feet / swivel castors with brake Options: Prjdpfxjfd Iixj Ab Hsc • Frequency inverter • Sieves available in various sizes • Sieve perforation 0.8 mm: for berry varieties • Sieve perforation 1.5 mm: for berry varieties • Sieve perforation 3 mm: for apples • Sieve perforation 5 mm: for cherries • Sieve perforation 8 mm: for plums and apricots • Sieve perforation 10 mm: for peaches

Kondisi: baru, Tahun pembuatan: 2025, Pressure: 40 t Stroke: 250 mm Table size: 625 x 1100 mm Flat bar (flat): 200 x 20 mm Prsdpfevx Dwrjx Ab Hsc Maximum pipe diameter: 2" Table height: 950 mm Working speed: 9.1 - 4.7 mm/sec Return speed: 45 mm/sec Machine weight: approx. 750 kg Space requirement: approx. 1.25 x 0.9 x 1 m Total power requirement: 3 kW Oil capacity: 45 l New hydraulic horizontal bending press with 4 advantages over other manufacturers: 1) Infinitely variable pressure adjustment UNDER LOAD with handwheels 2) UNDERSLUNG cylinder for 360° bending! 3) Operation from the front, not the side 4) Patented tapered tool holder Additionally, immersion depth and return point can be set by handwheel, along with stepless feed adjustment. Machines also available in the following sizes: press force from 22 to 150 t, stroke from 200 to 450 mm, also optionally with 2-axis control (immersion depth + side stop). A comprehensive range of tools for a wide variety of applications available on request. SIMASV bending presses have been quality machines since 1957.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 18,39 kW (25,00 hp), jenis bahan bakar: diesel, warna: merah, berat keseluruhan: 2.300 kg, Tahun pembuatan: 2024, jam operasional: 1 h, Perlengkapan: 4-dalam-1 sekop, kabin, sekop standar,

Kondisi: baru, Table diameter: 800 mm Table load capacity: 2 t Swivel range: up to 95 degrees Predek Rfwtjpfx Ab Hoc Torque: 1250 Nm Table rotation speed: 2 rpm Working height vertical: 550 - 1300 mm Working height horizontal: 650 - 1400 mm Total power requirement: 2.53 kW Machine weight approx.: 930 kg Space requirement approx.: 1.85 x 1.66 m A video is available on our website. Electrics: 400 Volt Hand control panel Hydraulic power unit Hydraulic positioner for continuous rotation right/left, tilting (swinging), lifting and lowering as well as stepless rotation via inverter, rotatable mass return for connection of the welding unit’s ground cable. Foot pedal control and swivelling up to 140 degrees available on request. Various sizes from 1,250 - 18,000 kg load capacity available in our production program. VIDEOS on our homepage. STOCKING DEALER WITH 1,600 m² SHOWROOM.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 18,39 kW (25,00 hp), warna: merah, berat keseluruhan: 1.470 kg, Tahun pembuatan: 2024, jam operasional: 1 h, Perlengkapan: 4-dalam-1 sekop, garpu palet,

Kondisi: bekas, Tahun pembuatan: 2000, Workpiece diameter – max. 40 mm Workpiece diameter – min. 10 mm Workpiece length 200 – 640 mm Control: PLC Siemens S5 95 U Total power requirement: 25 kW Machine weight approx. 5 t Space requirement approx. 8.5 x 2.8 x 2.35 m Hydraulic cut-off and double-ended machining machine suitable for the pre-processing of trapezoidal thread spindles and other round workpieces, including cutting from bar stock and both-end machining such as chamfering, face milling, and drilling on stationary parts with rotating tools. The machine consists of: - Base machine model TR 60/4-650, workpiece length 640 mm - Bar feeder for bar length 2 – 3.5 m - Standard version for solid bars up to 40 mm diameter - Central positioning of bar feed rollers - Bar loading unit - Standard feed gripper - Indexing turret with 4 clamping stations, model TR 300.00 - 4 base jaws, width 80/140 mm, diameter 75 mm - Turret swivels in both directions - Sawing unit with worm drive TR 200.00, stroke 100 mm - Saw blade: 350 mm, speed 25/39 rpm - Motor power: 2.6/3.2 kW - Motorized positioning of saw head - Automatic positioning of saw stand with hydraulic clamping - Saw blade guide - Machining unit no. 1 – USP.00/M - Speeds: 842/1684 rpm, 3.3/4.0 kW - Working stroke: 80 mm - Rapid advance: 40 mm - Spindle mounting ISA 40/M 16 - Toothed belt drive - Machining unit no. 2 – USP.00/M - UF - Speeds: 360/720 rpm, 1.8/2.8 kW - Working stroke: 80 mm - Rapid advance: 40 mm - Spindle mounting ISA 40/M 16 - Toothed belt drive - Thread cutting attachment for right and left-hand threads - Machining unit no. 3 – USP.00/M - Speeds: 842/1684 rpm, 3.3/4.0 kW - Working stroke: 80 mm - Rapid advance: 40 mm - Spindle mounting ISA 40/M 16 - Toothed belt drive - Machining unit no. 4 – USP.00/M - Speeds: 943/1882 rpm, 3.3/4.0 kW - Working stroke: 80 mm - Rapid advance: 40 mm - Spindle mounting ISA 40/M 16 - Discharge chute - Metric ruler rails for all adjustment movements - Hydraulic system with delivery pump SAUER SUNDSTRAND - Accumulator - Rexroth flow regulator for machining units and saw - Coolant system with filter and tank - Coolant pump CALPERA - Electrical system in separate control cabinet, Control voltage 24V/50 Hz - PLC SIEMENS S5 95 U Podjvp Sd Ispfx Ab Hsrc - Machine lamp - Signal beacon for machine downtime indication - Central lubrication - Chip conveyor In 2011, a comprehensive mechanical overhaul was carried out to optimize positioning and centering accuracy at a cost of €25,000. In addition, switches, some cables, ball bearings, seals, hydraulic hoses, etc., were replaced. The machine has hardly been operated in recent years, with total operating hours estimated by the owner at approx. 24,000. This is a used machine, therefore we sell under exclusion of any warranty. STOCK-HOLDING DEALER WITH 1,600 m² SHOWROOM.

Kondisi: baru, en-GB Prjdpfovw Du Ujx Ab Hsc