Beli Plum bekas (123)

Kondisi: bekas, Tahun pembuatan: 1975, drehmaschine-gebraucht-sonderpreis Dsdpfsycxf Asx Abheun

Kondisi: bekas, Approx. 7 m double-walled stainless steel chimney / flue system with base console (insulated with approx. 25 mm mineral wool), including all necessary clamping bands and terminal cap. The unit was in operation for only about 1.5 years. Internal diameter: approx. 400 mm External diameter: approx. 470 mm Length: approx. 7 m Duedpfsru Hn Rex Abhjn Insulation: 25 mm mineral wool

Kondisi: baru, Sheet width: 2050 mm Sheet thickness: 3 mm Strokes per minute: up to 35 Cutting angle: 2.0° Table height above floor: 870 mm Duedpsvdfmxefx Abhon Sheet thickness (stainless steel): 2 mm Total power requirement: 4 kW Approximate machine weight: 1550 kg Dimensions (L x W x H): 2.5 x 1.57 x 1.21 m The new SMP motorized guillotine shear is a well-dimensioned machine featuring fully welded slide guides. Drive is provided by a standard gear brake motor via a chain connection to the main shaft. The blades are of the highest quality. The optimal cutting angle, in conjunction with the sheet hold-down, ensures perfect cuts. Bearings and guides are maintenance- and lubrication-free. Standard equipment: • Rear gauge 665 with mm scale • Cutting line illumination • Stroke counter • Table extensions 600 mm • Right-angle gauge, left side • Movable 24V foot switch with emergency stop • Motor protection switch and emergency stop • 2 cutting edges per blade • Rear safety guard Warranty: 12 months for single-shift operation. Warranty covers spare parts only; defective parts must be returned. Labor costs for replacement and downtime are not covered. The bending capacity refers to 380 N/mm² material strength. Other models: 1275 x 3 mm, 1250 x 4 mm, 2050 x 2 mm STOCK-HOLDING DEALER WITH OWN 1600 m² WAREHOUSE.

Kondisi: bekas, Tahun pembuatan: 2000, Workpiece diameter – max. 40 mm Workpiece diameter – min. 10 mm Workpiece length 200 – 640 mm Control: PLC Siemens S5 95 U Total power requirement: 25 kW Machine weight approx. 5 t Space requirement approx. 8.5 x 2.8 x 2.35 m Hydraulic cut-off and double-ended machining machine suitable for the pre-processing of trapezoidal thread spindles and other round workpieces, including cutting from bar stock and both-end machining such as chamfering, face milling, and drilling on stationary parts with rotating tools. The machine consists of: - Base machine model TR 60/4-650, workpiece length 640 mm - Bar feeder for bar length 2 – 3.5 m - Standard version for solid bars up to 40 mm diameter - Central positioning of bar feed rollers - Bar loading unit - Standard feed gripper - Indexing turret with 4 clamping stations, model TR 300.00 - 4 base jaws, width 80/140 mm, diameter 75 mm - Turret swivels in both directions - Sawing unit with worm drive TR 200.00, stroke 100 mm - Saw blade: 350 mm, speed 25/39 rpm - Motor power: 2.6/3.2 kW - Motorized positioning of saw head - Automatic positioning of saw stand with hydraulic clamping - Saw blade guide - Machining unit no. 1 – USP.00/M - Speeds: 842/1684 rpm, 3.3/4.0 kW - Working stroke: 80 mm - Rapid advance: 40 mm - Spindle mounting ISA 40/M 16 - Toothed belt drive - Machining unit no. 2 – USP.00/M - UF - Speeds: 360/720 rpm, 1.8/2.8 kW - Working stroke: 80 mm - Rapid advance: 40 mm - Spindle mounting ISA 40/M 16 - Toothed belt drive - Thread cutting attachment for right and left-hand threads - Machining unit no. 3 – USP.00/M - Speeds: 842/1684 rpm, 3.3/4.0 kW Duedpfx Asvp Sd Iobhjn - Working stroke: 80 mm - Rapid advance: 40 mm - Spindle mounting ISA 40/M 16 - Toothed belt drive - Machining unit no. 4 – USP.00/M - Speeds: 943/1882 rpm, 3.3/4.0 kW - Working stroke: 80 mm - Rapid advance: 40 mm - Spindle mounting ISA 40/M 16 - Discharge chute - Metric ruler rails for all adjustment movements - Hydraulic system with delivery pump SAUER SUNDSTRAND - Accumulator - Rexroth flow regulator for machining units and saw - Coolant system with filter and tank - Coolant pump CALPERA - Electrical system in separate control cabinet, Control voltage 24V/50 Hz - PLC SIEMENS S5 95 U - Machine lamp - Signal beacon for machine downtime indication - Central lubrication - Chip conveyor In 2011, a comprehensive mechanical overhaul was carried out to optimize positioning and centering accuracy at a cost of €25,000. In addition, switches, some cables, ball bearings, seals, hydraulic hoses, etc., were replaced. The machine has hardly been operated in recent years, with total operating hours estimated by the owner at approx. 24,000. This is a used machine, therefore we sell under exclusion of any warranty. STOCK-HOLDING DEALER WITH 1,600 m² SHOWROOM.

Kondisi: baru, Capacity 750 kg Maximum workpiece size 900 x 300 mm Total workpiece weight 550 kg Max. workpiece weight 30 kg/piece Rotational speed 22 rpm Filling level 50-60% Colour blue RAL 5015 Opening 1775 x 440 mm Total power requirement 3 kW Machine weight approx. 1,995 kg Required space approx. 2.9 x 1.33 x 1.75 m New drum-type deburring or descaling machine for safe and efficient deburring of workpieces. Suitable for heavy-duty applications. Hexagonal drum lined with durable, vulcanised rubber (thickness: 36 mm), cover with gas struts, roller shutter for protection against rotating drum, robust design, easy operation. Control via timer on the control panel, main and emergency stop switches. The maximum filling quantity is 40% of the drum volume and corresponds to 750 kg, consisting of 550 kg of workpieces + 200 kg of deburring media = hardened manganese balls (200 kg included) or cast iron pentagons. These are available from Sideros. Optional accessories: Stepless speed control via frequency inverter approx. 13-22 rpm (3,200 €) Sound enclosure (65/70 dB), see photo 9, and Sideros ECO B2 dust extraction unit, see photo 8, available at extra cost. The manufacturer recommends that, for complex workpieces, 100 kg of sample parts of the material to be deburred are sent to the factory for testing prior to ordering. Otherwise, the manufacturer cannot assume responsibility for the result of the deburring process. VIDEO available on our website. Duedpfxev S Iq Ao Abhsn Warranty = 12 months for single-shift operation. If replacement parts are supplied, the defective parts must be returned. Downtime of the machine is not covered. STOCK-HOLDING DEALER WITH 1,600 m² SHOWROOM.

Kondisi: baru, Tahun pembuatan: 2024, Sheet width 1020 mm Sheet thickness 2.5 mm Frame width 1045 mm Max. opening width 47 mm Max. bending angle 135° Machine weight approx. 290 kg Space requirement approx. 1.35 x 0.86 x 1.17 m Unused demonstration machine at a special price: Manual folding machine with segmented upper beam for bending box profiles, max. flange height approx. 64 mm, upper beam clamping operated by foot, manual bending beam operation with weight compensation, adjustable bending stop, bending radius can be changed by adjusting the bending beam. Please note: This is a demonstration machine being sold at a special price, therefore we offer it under exclusion of any warranty. STOCKING DEALER WITH 1,600 m² SHOWROOM. Dujdpfxjwgn Amo Abhon

Tahun pembuatan: 2026, Kondisi: baru, Die destoning and pulping unit is ideal for processing fruit and vegetables. With interchangeable screens and an adjustable rotary rotor, stone fruit, pome fruit, as well as various other fruits and berries can be efficiently processed. The machine separates pulp and pits/kernels, ejecting them independently. Screen changes can be carried out quickly and easily. One screen is supplied as standard; additional screens can be ordered as required. • Food-grade rubber scraper for hygienic processing • The gap between the screen and scraper is individually adjustable • Machine feet with castors, swivel-mounted and with brakes for easy handling ⚙️ Technical specifications • Rated capacity: up to 4,000 kg per hour • Power requirement: 4 kW, 400 V, 16 A • Material: Wnr. 1.4301, AISI 304 stainless steel Screen sizes: • 0.8 mm: Berries, purée • 1.5 mm: Berries, purée • 3 mm: Apple, pear pulp • 5 mm: Cherry • 8 mm: Plum, apricot • 10 mm: Peach, mango Dimensions: Length: 1,130 mm Width: 574 mm Height: 1,138 mm Dujdpjv Srdtjfx Abhjn Weight: 125 kg

Tahun pembuatan: 2026, Kondisi: baru, Seed Removal and Pulping System with interchangeable screens and adjustable rotor. Suitable for pulping stone fruit, other fruits, and berries. The mash and pits are separately discharged. Screens can be changed easily and quickly. The unit is supplied with one screen; additional screens can be ordered as required. Dujdpsd Aqy Rsfx Abhjn Technical data: • Rated output: 500-1000 kg/h • Power requirement: 2.2 kW, 400 V, 6 A, 3-phase • Material: Wnr. 1.4301, AISI 304 stainless steel • Dimensions: 650 x 1100 x 1140 mm • Weight: 100 kg • IP65 electrical control circuit • Food-safe rubber scrapers • Adjustable gap between screens and scrapers • Adjustable machine feet/swivel castors with brake Options: • Frequency converter • Screens available in various sizes: • Screen hole size 0.8 mm: for various berry types • Screen hole size 1.5 mm: for various berry types • Screen hole size 3 mm: for apples • Screen hole size 5 mm: for cherries • Screen hole size 8 mm: for plums and apricots • Screen hole size 10 mm: for peaches

Tahun pembuatan: 2026, Kondisi: baru, Stone Fruit Destoning / Pulping Unit with Interchangeable Sieves and Adjustable Rotor. Suitable for processing stone fruits, soft fruits, and berries. The pulp and the pits are discharged separately. Sieves can be swapped out quickly and easily. The unit is supplied with one sieve, and additional sieves can be ordered separately. Technical Data: • Nominal capacity: 1,000–5,000 kg/h • Power requirement: 5.5 kW, 400 V, 16 A • Material: Wnr. 1.4301, AISI 304 stainless steel • Dimensions: 860 x 1820 x 1350 mm • Weight: 190 kg • IP65 electrical configuration • Food-grade rubber scrapers Dodpsfd Iixefx Abhjun • Adjustable gap between sieve and scraper • Adjustable machine feet / swivel castors with brake Options: • Frequency inverter • Sieves available in various sizes • Sieve perforation 0.8 mm: for berry varieties • Sieve perforation 1.5 mm: for berry varieties • Sieve perforation 3 mm: for apples • Sieve perforation 5 mm: for cherries • Sieve perforation 8 mm: for plums and apricots • Sieve perforation 10 mm: for peaches

Tahun pembuatan: 2026, Kondisi: baru, Stone Fruit Destoning and Pulping Line with Interchangeable Screens and Adjustable Rotor. Suitable for pulping stone fruits, berries, and other fruits. Mash and pits are discharged separately. Screens can be swapped quickly and easily. The machine is supplied with one screen; additional screens are available upon request. Technical Data: - Rated capacity: 1,000–5,000 kg/h - Power requirement: 11 kW, 400 V, 32 A, three-phase - Material: W.-Nr. 1.4301, AISI 304 stainless steel - Dimensions: 1,450 × 1,650 × 1,850 mm - Discharge height: 300 mm - Feed height: 1,750 mm - Weight: 190 kg Duodpfxjd Aqzdj Abhsn - Electronics rated IP65 - Machine compliant with EU directives - Minimal maintenance - User-friendly operation - Easy to clean - 2 swivel castors and 2 fixed castors / 4 vibration-damping machine feet - Food-grade rubber wipers The machine features two processing zones: first, the destoning of the fruit; second, the pulping process. The price includes one selected screen. Optional equipment: - DN 65 outlet for mash pump - Frequency converter - Screens: - 0.8 mm: Berries - 1.5 mm: Berries, purée - 3 mm: Apple, pear - 5 mm: Cherry, sour cherry - 8 mm: Plum, apricot - 10 mm: Peach - Custom fabrication

Tahun pembuatan: 2026, Kondisi: baru, Condensation drying of air and, indirectly, of food products (such as fruit, tea, mushrooms, and similar items) is the most energy-efficient method for removing water from various materials. It operates on the heat pump principle – by cooling down to vapor temperature, the temperature drops below the dew point, causing the surface of the condenser to collect moisture from the air. The heat extracted from the air is immediately returned to the same air, and with the aid of the electrical energy required to run the compressor, an additional 20-30% heat is generated. - Suitable for drying various types of fruit (apples, plums, apricots, etc.) - Digital control - Automatic ventilation - Fitted with stainless steel mesh trays Technical specifications: - Rated capacity: 25–50 kg per batch - Power consumption: 0.6 kW, 230 V Dedpfx Ajd Atipsbhjun - Temperature range: 40–60°C - Material: stainless steel, Wnr. 1.4301, AISI 304 - Dimensions: 710 x 800 x 2000 mm - Weight: 100 kg - Trays: 11 pieces (570 x 570 mm) - Drying surface: approx. 3.6 m² - Continuous airflow - Insulation: 70 mm polyurethane - Closed condensate system, condensate drainage - Minimal maintenance Suitable for fruit, vegetables, spices, herbs, mushrooms, pasta.

Tahun pembuatan: 2026, Kondisi: baru, Condensation drying of air and, indirectly, of food products (such as fruit, tea, mushrooms, etc.) is the most energy-efficient method for removing moisture from various materials. This process operates on the heat pump principle—by cooling to the vapor temperature, the temperature falls below the dew point, causing condensation to form on the surface of the condenser from the ambient air's moisture. The heat extracted from the air is immediately returned to the same air, and with the addition of the electrical energy required to run the compressor, 20-30% more heat is generated. Duodpfx Absd Atghehen - Suitable for drying various types of fruit (apples, plums, apricots, etc.) - Digital control - Automatic venting - Equipped with stainless steel wire racks Technical Data: - Rated capacity: 50–100 kg per cycle - Power requirement: 1.2 kW, 230 V - Temperature range: 40–60 °C - Material: Stainless Steel, Grade 1.4301 (AISI 304) - Dimensions: 1420 x 800 x 2000 mm - Weight: 200 kg - Racks: 22 units (570 x 570 mm each) - Drying area: approx. 7.2 m² - Continuous ventilation - Insulation: 70 mm polyurethane - Closed condensate system, condensate drain - Minimal maintenance required Suitable for fruit, vegetables, spices, herbs, mushrooms, pasta.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Cherry and Plum Pitting Machine Model: MPB-A For easy pitting Processing capacity approx. 35-190 kg/h depending on fruit and size Tabletop unit with handwheel Safety switch DGUV V3 tested exclusively by us Connection: 400V, 500W, 16A CEE plug Duedpfxoiduife Abhjn Dimensions: 465 x 410 x 480 mm (W x D x H) Used machine, cleaned and SAB-tested Options: - Cherry tray - Cherry stoner attachment - Maintenance contract Visit our large bakery machinery exhibition

Kondisi: baru, Penggiling Pisau Motor: 2,2 kW / 2800 rpm 220V Kapasitas: buah 400–800 kg/jam, bahan kering 40–200 kg/jam Saringan: 4 buah sesuai permintaan Fungsi mesin: Pra-penghancuran dan penggilingan Produk yang dapat digiling: - Serealia: gandum, jagung, kacang polong, merica, jintan - Biji hasil pengepresan: kue biji bunga matahari, kue kedelai, kue biji labu, kue biji rami, kue biji poppy, dll. - Buah dan sayuran segar: paprika, plum, aprikot, apel, quince, pir - Buah dan sayuran kering: paprika, bawang, bawang putih, raspberry, blackberry, apel, ceri, dll. Komponen utama mesin: - Rangka - Saklar pengaman - Motor 380V atau 220V - Rumah mesin - Corong pemasukan - Saringan - Pisau - Pengatur pemberian bahan Dodpfoxvxbcex Abhjun Konstruksi stainless steel.

Tahun pembuatan: 2025, Kondisi: baru, Mesin pembuat krim, penghancur, pembuat selai kacang (Penghancur batu untuk krim dan pasta) Krim atau mentega yang dihasilkan memiliki ukuran partikel sangat halus, sehingga keluar dari mesin menyerupai minyak—tidak ada partikel kasar yang terdeteksi. Dujdpfxexvrxzo Abhen Fungsi mesin: Pembuatan krim, penggilingan biji labu, penggilingan kelapa. Produk-produk berikut dapat dihaluskan atau dibuat krimnya: Biji berminyak: - Kacang tanah, hazelnut, almond, walnut, kacang mete. - Pistachio, biji bunga matahari, biji labu, biji rami, kelapa. - Susu kedelai (tofu), buncis (hummus). Untuk susu kedelai dan buncis, penambahan air diperlukan! Biji berminyak perlu dilakukan pemanasan sebelum pemrosesan. Pengolahan buah dan sayuran menjadi krim: aprikot, plum, krim paprika, krim bawang putih. Motor: 4 kW 380V Kapasitas: 20-60 kg/jam Tingkat kehalusan krim, ukuran partikel: 50-150 mikron

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Pemecah Kacang Bahan yang dapat dibersihkan: Duedpfswizubjx Abhsn - kacang hazel, - kenari, - biji plum, - biji aprikot, - biji ceri asam, - biji ceri, - almond Fungsi mesin: Pecah, hancurkan, dan lepaskan kulit biji. - Motor: 380V atau 220V, 2,2 kW - Kapasitas: 120-900 kg/jam - Efisiensi: 98%-100%

Tahun pembuatan: 2020, Kondisi: baru, Stainless steel version with feed hopper For destoning cherries, plums, sour cherries, apricots, peaches, etc. Suitable for various sieve inserts Sieve with 5 mm perforation is installed in the machine. Electrical connection: 400V 50 Hz 3-phase / 11 kW Djdpfjcl Tu Iox Abhoun Rated output: 2,500 kg/h (depending on fruit type and level of ripeness) Continuously adjustable rotor speed control

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Kirschen- und Zwetschgen Entsteinmaschine_MPBGebraucht Djdpfeidui Uex Abhjun

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Los llenadores telescópicos de Zilli & Bellini son aptos para procesar una amplia gama de productos, desde productos granulados de libre fluidez hasta tomates pelados enteros. Adecuados para envases redondos y no redondos de metal, vidrio o plástico. Dusdpfx Ajwnd Emjbhsn Especialmente diseñados para compactar productos densos y de difícil llenado dentro del envase tras el llenado por pistón. PRODUCTOS: - Tomates pelados (enteros, en rodajas y en cubos) - Aceitunas (enteras y en rodajas) - Champiñones (enteros y en rodajas) - ALIMENTO PARA MASCOTAS - Legumbres: guisantes, garbanzos, lentejas, judías y habas - Verduras (enteras, en rodajas y en cubos): zanahorias, patatas, cebollas, granos de maíz, judías verdes, etc. - Frutas (enteras, en rodajas y en cubos): cerezas, fresas, ciruelas, grosellas, albaricoques, peras, melocotones, etc. - Ravioles, pasta, cereales y arroz - Berberechos y mejillones * La producción puede variar en función del formato y del producto a llenar.

Tahun pembuatan: 2024, Kondisi: baru, Der Innenraum einer Entsteinungs- und Passiermaschine besteht aus einer zentral montierten Förderschnecke sowie einem Sieb, das an den Seiten der Maschine angebracht ist. Nach dem Beladen mit Früchten oder Beeren dreht sich die Schnecke schnell und presst das Produkt durch das Sieb. Dadurch wird ein klarer, von Steinen und Schalen befreiter Frucht- oder Beerenpüree durch das Sieb gepresst. Steine, Kerne und Schalen werden über einen speziellen Auslass aus der Maschine entfernt. Das Püree tritt über einen separaten Auslauf aus. Verfügbare Kapazitäten: 500 l/h, 1000 l/h, 2000 l/h. Für eine weitere Verfeinerung oder dünneres Püree kann der Passiervorgang mit einem weiteren Sieb wiederholt oder das Püree für die Weiterverarbeitung in eine pneumatische Presse gegeben werden. Für weitere Verarbeitungsoptionen oder dünneres Püree kann der Passiervorgang mit einem anderen Sieb wiederholt oder das Püree in eine Bandpresse oder einen Rotationsfilter gegeben werden. Die Maschine wird serienmäßig mit einem integrierten Sieb geliefert. Zusätzliche Siebe können nach Kundenwunsch bestellt werden. Die Entsteinungs- und Passiermaschine arbeitet vollautomatisch. Die Maschine ist einfach zu reinigen, es gibt keine geschlossenen oder unzugänglichen Stellen, alle Bauteile sind leicht zu montieren. Die Maschine besteht vollständig aus Edelstahl und ist mit schwenkbaren Rädern ausgestattet. Verfügbare Siebe: Mit 0,6–2 mm Lochdurchmesser – für das Passieren von Beeren mit kleinen Kernen oder für den wiederholten Passiervorgang von bereits entsteintem Fruchtfleisch. Mit 3 mm Lochdurchmesser – zur Gewinnung von Püree aus zerkleinertem Kernobst (z. B. Äpfel, Birnen, Guaven usw.). Duedpfx Aehu Aa Robhon Mit 3 oder 5 mm Lochdurchmesser – für Kirschen und kleine Pflaumen. Mit 8 mm Lochdurchmesser – für größere Pflaumen, Aprikosen, Pfirsiche. Mit 10 mm Lochdurchmesser – für Mangos und ähnliche Früchte.

Tahun pembuatan: 2025, Kondisi: baru, SPECIAL OFFER! Washing Line with Rätz Mill + Destoning Unit IWR2000 Washing line with Rätz mill for fruit and vegetables. The system is manufactured entirely from stainless steel and features a sorting grate, washing tank, and conveyor belt. The produce drops into the water for pre-washing and is then transported via the conveyor, where it undergoes thorough cleaning with fresh water. Afterwards, the cleaned fruit is fed directly into the mill, where the desired screen can be selected to achieve the required mash consistency. • Easy to clean • Minimal maintenance • Infinitely variable conveyor speed in both directions • Equipped with 2 swivel casters • Equipped with 2 fixed casters Technical Data: Rated capacity: 2,000 kg/h Power requirement: 3 kW, 400 V, 10 A Mash outlet height: 1,400 mm Connection for washing tank: G 6/4” Connection for cleaning: G ½” Material: Wnr. 1.4301, AISI 304 stainless steel Water consumption: approx. 12 L/min Dimensions: Length: 2,700 mm Width: 840 mm Height: 2,270 mm Weight: 150 kg IPE4MAX The destoning and pulping unit is suitable for processing fruit and vegetables. It is equipped with interchangeable screens and an adjustable rotary rotor, enabling both the pulping and destoning of stone fruit, pome fruit, as well as various berries and assorted produce. Fruit pulp and pits are discharged separately. Screens can be changed quickly and easily. The unit is supplied with one screen; additional screens are available as options. • Food-grade rubber scraper • Adjustable gap between screen and scraper • Mobile machine feet / swivel casters with brakes Technical Data: • Rated capacity: up to 4,000 kg per hour • Power requirement: 4 kW, 400 V, 16 A • Material: Wnr. 1.4301, AISI 304 stainless steel Screen sizes: • 0.8 mm: berries, purée • 1.5 mm: berries, purée • 3 mm: apple, pear mash • 5 mm: cherry • 8 mm: plum, apricot Dedpfx Aewcl Ulebhoun • 10 mm: peach, mango Dimensions: Length: 1,130 mm Width: 574 mm Height: 1,138 mm Weight: 125 kg

Tahun pembuatan: 1996, Kondisi: sangat baik (bekas), Ferrum Vrsta: Automatska mehanička odstranjivačica koštica za trešnje ili šljive Model: EA sa 40 ploča Kućište: lijevano čelično Dimenzije (D x Š x V): 3.100 x 1.450 x 1.800 mm Težina: 1.600 kg Napajanje: 380 V – 50 Hz – 2,5 kW Alati: 22 mm/12 mm, 108 otvora Dusdpot Rr Ncjfx Abhen

Kondisi: baru, daya: 338 kW (459,55 hp), jenis bahan bakar: diesel, berat keseluruhan: 32.000 kg, konfigurasi gandar: 3 gardan, rem: retarder, warna: putih, tipe perpindahan gigi: otomatis, Perlengkapan: ABS, derek, filter jelaga, pendingin udara, program stabilitas elektronik (ESP),