Beli Prokuwa Plastik Gmbh bekas (72.633)

Kondisi: bekas, Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, BHS Rotor Impact Mill, tahun pembuatan 2000 – bekas, berfungsi Hnedpfxoxhgp Se Adqeu

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1994, de-to-tech-summary Hsdpsxg Ri Hjfx Adqenu

Kondisi: baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, maschinenbeschreibung-eh400-1 Hnsdpow Niuhefx Adqsu

Kondisi: bekas, Tahun pembuatan: 2009, jam operasional: 20.536 h, gaya penekanan: 80 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.400 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat kosong: 16.000 kg, Technical Data – Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 20,536 hours (as of September 2024) Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Feed hopper dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput rates at bulk densities of: – 30 kg/m³: approx. 6.0 t/h – 50 kg/m³: approx. 10.5 t/h Hjdpfx Aju Thypsdqonu – 100 kg/m³: approx. 17.5 t/h Bale weights at a bale length of approx. 1.2 m: up to 600 kg, depending on material PLC control: Siemens S7-300 Display panel: pulsotronic Installed press dimensions: 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight (press): 16 t Special equipment: – Wear-resistant floor made of HARDOX steel – Special press ram for compacting "difficult" materials and loose bulk goods with small grain size – Control cabinet climate control – Machine foot raising by 200 mm Note: The machine is currently in our workshop and undergoing partial refurbishment. We expect the refurbishment to be completed by the end of October, after which the machine will be tested and released for sale.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, jam operasional: 8.052 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.875 mm, jarak lintasan sumbu Y: 1.250 mm, jarak gerak sumbu Z: 1.345 mm, gerak cepat sumbu X: 24 m/menit, pergeseran cepat sumbu Y: 24 m/menit, pergerakan cepat sumbu Z: 24 m/menit, panjang pemakanan sumbu X: 1.875 mm, panjang umpan sumbu Y: 1.250 mm, panjang umpan sumbu Z: 1.345 mm, kecepatan pemakanan sumbu X: 24.000 m/menit, laju pemakanan gandar Y: 24.000 m/menit, laju pemakanan sumbu Z: 24.000 m/menit, torsi: 3.430 Nm, berat benda kerja (maks.): 4.000 kg, tinggi total: 4.950 mm, panjang total: 7.029 mm, lebar total: 5.200 mm, kecepatan rotasi (min.): 10 rpm, kecepatan rotasi (maks.): 10.000 rpm, berat keseluruhan: 51.200 kg, kecepatan spindel (min.): 1 rpm, kecepatan spindel (maks.): 500 rpm, jarak dari tengah meja ke hidung spindel: 1.600 mm, daya motor spindle: 37.000 W, hidung spindel: A2-11, panjang alat: 300 mm, jenis arus masuk: AC (pendingin udara), diameter pembubutan: 1.450 mm, diameter putar di atas sled silang: 1.250 mm, diameter spindel: 160 mm, saluran batang: 160 mm, diameter luar chuck: 500 mm, lubang collet: 160 mm, gaya umpan sumbu X: 20.000 N, gaya umpan sumbu Y: 20.000 N, gaya makan sumbu Z: 25.000 N, panjang spindle milling: 300 mm, diameter quill: 160 mm, gores kuas bulu: 250 mm, jarak gerak quill: 250 mm, lubang spindel: 160 mm, diameter ayun di atas peluncur melintang: 1.450 mm, diameter ayun di atas peluncur silang: 1.250 mm, diameter ayunan di atas alas atas: 1.100 mm, diameter pembubutan di atas alas geser: 1.300 mm, panjang pembubutan: 1.600 mm, Perlengkapan: dokumentasi / manual, konveyor serpihan, For sale: Mazak Integrex e-1250 V/8 mill-turn center with extensive accessories and a Mazak Palletech High Rise (800B) automation system. The system combines milling, turning, and automated pallet handling – ideal for complex workpieces in a single setup. _____ Technical Data – Integrex e-1250 V/8 • Travels: X = 1,875 mm, Y = 1,250 mm, Z = 1,345 mm • Rotary table: Ø 800 mm, 500 rpm • Tool magazine: 120 stations (CAPTO) • Control: Mazak SmoothX with 5-axis functions • Machining operations: milling, turning, drilling, tapping, 5-axis simultaneous machining Hedpjxgu E Esfx Adqonu • Coolant unit: high-pressure system up to 70 bar, Mayfran conveyor filter system, oil separator, coolant guns • Accessories: Tool Eye, Renishaw probe, HD camera system, overload monitoring _____ Software & Control Package • Synchronous tapping (G84.2 / G84.3) • Engraving and re-machining functions • Cylindrical & polar interpolation (EIA) • Tool length & radius compensation (5-axis) • Spline fine interpolation (EIA) • Mazatrol turning/milling functions • MT Connect adapter for networking _____ Automation – Palletech High Rise (800B) • Pallet transport system (mixed type) • Expandable high-bay solution for flexible manufacturing • Ideal for series and mixed production • Note: Pallets to be sourced separately _____ Special Features • Complete documentation (digital & paper) • All-inclusive package: machine + automation + accessories _____ Your Benefits • “Done in One®” concept: all machining in a single setup • Productivity: 5-axis machining + turning + pallet automation • Flexibility: from single parts to series production • Efficiency: automatic pallet changer & integrated measurement technology 📍 Location: Southern Germany 👉 Price and delivery conditions upon request

Tahun pembuatan: 2022, jam operasional: 596 h, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 10.500 kg, panjang total: 6.050 mm, lebar total: 2.450 mm, tinggi total: 2.700 mm, nomor mesin/kendaraan: B0402, EDDY ACTIVE adalah pemisah arus eddy dengan rotor kutub eksentrik untuk penyortiran logam. Sistem magnet yang digunakan memiliki kekuatan luar biasa, memungkinkan pemisahan logam non-besi secara efisien dari berbagai aliran limbah. • Sistem magnet eksentrik yang sangat kuat • Penyesuaian penutup otomatis Hedpjxgdg Eefx Adqonu • Pengaturan sabuk terintegrasi untuk mencegah pergeseran sabuk • Pembersih sabuk berputar • Dibangun secara kokoh dan kompak • Minim perawatan Modul ini merupakan bagian dari armada sewa kami.

Kondisi: baik (bekas), Tahun pembuatan: 2017, Götzinger Maschinen GmbH » Wagbachstr. 4 - 68753 Waghäusel 2 Concept: The planed workpieces are placed onto the cross conveyor, which serves as an infeed magazine. Two workpieces are then fed in sequence and processed. A milling spindle, mounted on a carriage, mills the radius of each workpiece consecutively. A saw unit separates the parts after milling. A gripper holds the part and subsequently guides it through the grinding units. 1 automatic edge milling machine: - 2 x infeed magazines as cross conveyors with 4 infeed belts Wood length min. 600 mm, max. 1200 mm - Base frame: robust welded construction made of profile steel tubing - Milling unit with: - 1 milling spindle, 9,000 rpm, 2 kW motor, variable frequency drive - X-Z traverse with linear guides, ball screw, NC servo motor - (Both spindles move synchronously along the contour) - Saw unit with saw blade d = 300 mm, 3,500 rpm, 2 kW - 1 gripper for workpieces, which grips the parts at the saw and then feeds them through the grinding units - 4 grinding units, each with a 1 kW grinding motor, approx. 800 rpm, manually adjustable - Electro-pneumatic control via PLC B+R with 10" touchscreen control panel, pneumatics from Festo - Machine supplied complete with 2 extraction ports (diameter 120 mm), without cutter heads, without grinding wheels, with 1 saw blade and 1 milling cutter - Feed axis right/left, separately constructed with 2 NC axes for workpiece feed - Brushing station: 2 brushes each on NC traverses, program-controlled movement relative to workpiece dimensions - Fault detection: Faults must be marked on the workpiece with chalk and inserted at the correct position. A sensor detects the chalk marking and diverts the part into a scrap chute. The process continues uninterrupted; only defective parts are excluded from brushing. - Central lubrication, automatically controlled via control panel - Clamping position measuring system: If variations are detected, the control system automatically compensates for dimensional differences. Hedew I A Raspfx Adqjnu - Waste removal via conveyor belt Finished wood dimensions: min. 32 x 16 mm max. 64 x 62 mm Finished wood length: min. 32 mm max. 320 mm Rectangular and round bars can be processed. Standard wood lengths: 1200 mm or 600 mm (these cannot be mixed!).

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Alat tirai gulung - Nosel lengkap dengan elemen pemanas dan alat kalibrasi Hjdpjxgpbbsfx Adqenu * Sambungan alat saat ini untuk Weber CE7 adaptor lain tersedia atas permintaan - Jalur ganda 2x 5 m/menit - Lebar daun tirai 52 mm - Sudah siap pakai - Termasuk pelat pemasangan (seperti pada gambar), untuk pemasangan di unit kalibrasi

Kondisi: baik (bekas), Tahun pembuatan: 2009, jam operasional: 20.709 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 106516-11, kedalaman pengeboran: 1.200 mm, berat keseluruhan: 7.500 kg, Menjual mesin bor lubang dalam TBT yang sangat lengkap dengan berbagai aksesori. Data pengeboran: Spindel 1: 5-18 mm; Spindel 2: 1-4 mm Kedalaman pengeboran: sekitar 1200 mm pada Ø8 mm dengan penggunaan 3 lunette Jumlah spindel: 2 Penggerak spindel: Spindel 1: 1x 4 kW; Spindel 2: 1x 1,2 kW Kecepatan spindel: Spindel 1: 600-6000 rpm; Spindel 2: 2000 – 24.000 rpm Gerak cepat: 15.000 mm/menit Langkah carriage (nominal): 1800 mm Cairan pendingin/pelumas: oli pengeboran dalam Kapasitas tangki: 1100 liter Hnedpsxgnhajfx Adqeu Tegangan kerja: 3AC 400V, 50Hz (daya sambungan total: 25 kW) Kondisi: Baik, sesuai usia Aksesori: Termasuk bak dasar dan berbagai jenis bor Inspeksi di tempat sangat diharapkan!

Kondisi: bekas, Tahun pembuatan: 2006, jam operasional: 54.050 h, gaya penekanan: 80 t, lebar bukaan pengisian: 1.020 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 750 kg, kapasitas tangki oli: 2.100 l, daya: 94 kW (127,80 hp), berat kosong: 21.000 kg, Technical Data – Baler: Manufacturer: Paal Model: Konti 275 E Year of manufacture: 2006 Total operating hours: 54,050 hours Main press force: 80 t at 300 bar Specific press force: 9.7 kg/cm² Feeding chute dimensions: 1,600 x 1,020 mm (L x W) Throughput under operating conditions: 350 m³/h Bale dimensions: 750 x 1,100 mm, length variable Drive power: 75 kW Total connected load: 94 kW Rated current: 180 A Tying system: 4-fold vertical, fully automatic Bale weights: up to 750 kg, depending on material Hydraulic oil tank volume: 2,100 L PLC (Make/Type): Siemens Simatic S7-300 Control panel (Make/Type): Siemens Multi Panel Transport dimensions press only: 11,152 x 2,152 x 3,000 mm (L x W x H) Press weight approx.: 21 t Condition of baler with conveyor: The baler and conveyor are in a satisfactory, operational condition, see photo documentation. Further technical data and dimensions for the conveyor are currently not available. The plant is currently still in operation and will be replaced in the coming months by a larger baling system. Hsdjxcxm Espfx Adqenu Scope of supply: Baler, bale slide, conveyor belt and machine documentation. Remarks: The documentation (operating manual, CE, electric/hydraulic circuit diagrams) is complete. An inspection is possible by arrangement. Dismantling and loading is the responsibility of the buyer. We do not accept liability for the technical data or for possible errors.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, - made of steel - filling weight 8 kg Hnsdpfxsfpa Rpo Adqeu - with glue gun and nozzle

Tahun pembuatan: 2023, jam operasional: 343 h, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 10.300 kg, panjang total: 6.050 mm, lebar total: 2.450 mm, tinggi total: 2.700 mm, nomor mesin/kendaraan: B0302, Modul ini cocok untuk hampir semua jenis material (termasuk material basah atau sangat abrasif). Penyaringan teknis yang sempurna bahkan pada kapasitas tinggi dapat dicapai melalui kombinasi dek atas dengan media saringan 3D dan teknologi screen tensioner di dek bawah. Kombinasi ini memungkinkan penyaringan hampir tanpa penyumbatan pada percepatan hingga 50G, sehingga media saringan Anda tetap bersih setiap saat. Mesin ini merupakan bagian dari armada sewa kami. Hnedpsxgda Eefx Adqou

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, Please let us know your offer price. Sales only within Europe, including Turkey. Price without packaging; Delivery condition: FCA (machine location) ===== For technical data, please refer to the attached handout. All warranty and guarantee rights are excluded. We do not guarantee the accuracy of the technical data and year of manufacture, completeness of accessories and tooling, or compliance with all safety and environmental protection requirements stipulated by accident prevention regulations. No sale to private individuals. Hjdpoxghr Eofx Adqsnu

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Semi-automatic depaneling / Base unit with parallel shuttle The dynamic depaneler LOW 4322 XL is specifically designed for medium to high product volumes and meets the increasing demands of modern production processes. Panels made of various PCB materials are separated using low-dust, low-stress sawing and milling techniques, ensuring maximum product flexibility, precision, and throughput. High-dynamic linear motor axes, tools, and grippers meet the highest quality standards and guarantee the depaneler’s long service life and reliability. Semi-automatic depaneling – tailor-made solutions The LOW 4322 XL depaneler enables rapid product changeovers while maintaining short separation and handling times. The PCB panel is loaded via a parallel shuttle, and clamped with a pin-clamping technique, optionally combined with vacuum suction cups as needed. Made in Germany Machine features: • Shaft and disc tool separation module on the Z-axis (automatic rotation 0-90 degrees) • X-Y cross-table module featuring linear motor technology with high-resolution measurement system • Dual loading module configured as a parallel shuttle, separate left and right sides with sliding doors • Steel welded frame with two maintenance doors – left and right; ESD-safe design • Standard vision system base module for teach-in programming Hnedpfx Aovuw R Rjdqou • Working area: 520 x 480mm • Automatic milling cutter length detection • Remote maintenance/support via remote connection • Touch IPC with Windows 10 Pro operating system • Laser axis measurement including log/report • Air ionization • Milling cutter breakage control (only for shaft milling tools) • Provisions for vacuum clamping technology • ESD powder coating, RAL 9002, for cover and sliding doors An optional dust extraction unit can be offered retrofitted upon request.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, warna: putih, lebar ruang muat: 6.000 mm, panjang ruang muatan: 6.000 mm, tinggi ruang muatan: 2.000 mm, NEW PRODUCTS Our available sizes: Width x Length → 6m x 6m → from €1,299 → 8m x 6m → from €2,099 → 12m x 8m → from €3,699 → 10m x 12m → from €4,599 → 12m x 12m → from €10,745 ☆ CERTIFIED PRODUCTS ☆ TRANSPARENT PRICING ☆ INCLUDES GERMAN STRUCTURAL ANALYSIS ☆ INSTALLATION AVAILABLE ️ → Genuine 750 g/m² PVC tarpaulin – more durable than standard products on the market ️ → Extra robust and tear-resistant due to reinforced mesh layer ️ → UV resistant ️ → 100% waterproof ️ → Extra sturdy, galvanized steel tubing for maximum stability ️ → Suitable for year-round use ️ → German customer service and professional advice during purchase and assembly ️ → Snow load capacity: 130kg/m² (arch spacing 1m) and 70 kg/m² (arch spacing 2m) ️ → Wind load: Wind zone 4 (arch spacing 1m) and wind zone 2 (arch spacing 2m) ️ → Including ground stakes and concrete anchors, as well as all other small parts ️ → Spare parts guaranteed ️ → 5-year warranty on properly installed PVC cover ️ → 10-year warranty against corrosion of the steel frame ► Most models available for immediate delivery ► Colors: green or white ► Includes German engineering certification ► Doors on both gable ends ☏ Call us! We will gladly provide you a non-binding quote with a best price guarantee. THE IDEAL ALTERNATIVE TO PERMANENT CONSTRUCTIONS Optimal protection from wind, sun, rain, hail, and snow! Usually permit-free (unlike wood, steel, or sheet metal halls) No foundation required High stability and safety (verified by German engineering office) Decades of use: high quality, warranty, and spare parts provision ️Robust, corrosion-free framework Different shapes, colors, and sizes available VERSATILE APPLICATIONS Hsdpfx Adsudwgfeqjnu → ️In agriculture, forestry, industry, commerce, and private use → Storage space for goods, materials, or machinery → Garage / Carport for trucks, motorhomes, or boats / yachts → Workshop in a lightweight hall → Shelter on construction sites → Grazing tent or stable for livestock → Barn for straw, hay, and firewood → Greenhouse for plants ! Prices include structural analysis ! Delivery and installation available *Images may differ · Prices & colors may vary · Subject to price changes · For an exact price, please request a non-binding quote · Available while supplies last · Offer non-binding

Kondisi: baik (bekas), Tahun pembuatan: 2012, jam operasional: 12.078 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 88 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.800 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 750 kg, berat keseluruhan: 30.000 kg, kapasitas tangki oli: 2.000 l, daya: 98 kW (133,24 hp), laju aliran volumetrik: 643 m³/jam, en-001 Hnedpfoxcngnsx Adqsu

Kondisi: baru, Tahun pembuatan: 2024, MOBIL 2500 Mobile Pneumatic Edge Press for Furniture Manufacturing! Technical Data MOBIL Type 2500 (Type 3000): > Robust frame-welded construction made of rectangular hollow sections, equipped with a stop and straightedge for solid wood, veneer, and plastic edging. > Integrated electric heating rod made from durable aluminum alloy, cross-section 64 x 46 mm, adjustable from 50 to 248°C, output 1200 (1450) watts. Hnsdpfxsyuv Tj Adqju > 4 (6) clamping and pressing units, each with 7-way ball bearings. Each pressing unit features both a clamping and a pressing cylinder; edge banding width adjustable via the adjustable straightedge from 12 to 105 mm wide. Edging thickness for solid edges up to 50 mm. > Adjustable counter bearings for exact projection of the edging. > Clamping cylinders and counter bearings with rubber pads. The stop and straightedge are coated with a special adhesive-repellent finish. > The pneumatic pressing units can always be controlled in pairs, with one switch for 'clamping the workpiece' and one switch for 'pressing.' > Press is mobile with 4 swivel casters, 2 of which have brakes. > Equipped with a pneumatic maintenance unit, connection 3/8", adjustable from 3 to 10 bar. Electrical connection for the heating rods is 230 V, 50 Hz, 1200 (1450) watts. Usable dimensions (W x H x D in mm): 2500 x 50 x 105 External dimensions (W x H x D in mm): 2700 x 1200 x 850 Additional options and accessories for MOBIL available on request! Packaging: €92,-

Tahun pembuatan: 2024, jam operasional: 150 h, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 9.600 kg, panjang total: 6.050 mm, lebar total: 2.450 mm, tinggi total: 2.700 mm, nomor mesin/kendaraan: B0704, SENSOR IDENTIFY adalah pemilah induksi yang memisahkan material berdasarkan konduktivitas listriknya. Jika diperlukan, perangkat ini juga dapat dilengkapi dengan sistem kamera warna untuk mendeteksi bentuk dan warna tambahan. Hjdpfx Adexgc Iuoqjnu Dengan demikian, pemilahan material dengan konduktivitas listrik berbeda seperti logam dan non-logam dapat dilakukan secara serbaguna dan presisi. Partikel yang terdeteksi akan dikeluarkan menggunakan udara bertekanan. Modul ini merupakan bagian dari armada sewa kami.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: LAS 23, The mobile LAS 23 portable laser is distinguished by its compact design. Small, handy, and equipped with customised attachments that can be individually exchanged via a quick-change system. Thanks to its mobile base frame, it can be wheeled directly to the workpieces to be marked, making it suitable for both large and heavy as well as small workpieces. The integrated fume extraction system is built into the device. The powerful laser software enables texts, numbers, 2D codes, QR codes, and logos to be created with just a few clicks and without extensive programming knowledge. The software can increment serial and article numbers automatically after presetting. In addition, variable information such as drawing numbers or project names can be automatically retrieved from existing tables and transferred into predefined fields. The use of a handheld scanner is also possible. Made in Germany • 30W fiber laser (optional: 20W, 50W) • Laser class 1 • Wavelength: 1064nm • Marking field size: 70x70mm (optionally larger) • Marking software EZCAD (available in German/English) • Pilot laser (simple preview, plain text preview) • Laptop with mount and Windows OS included • Constructed from aluminium profiles • 230V connection including cable reel • Air-cooled • Dimensions: approx. 350 x 605 x 1080mm (L x W x H) • Weight: approx. 40 kg • Weight of portable laser unit: approx. 2.8 kg Hnsdpfx Aeu Smd Sedqsu • Integrated extraction system

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, Technische Beschreibung – Hauptdaten: Tragkraft: 1000 kg statische Streckenlast Nutzhub: 810 mm Bauhöhe: 200 mm Gesamthöhe: 1010 mm Plattformlänge: 1300 mm Plattformbreite: 800 mm Material: Glattes Blech Hubzeit: ca. 16 Sekunden für den vollen Nutzhub Senkzeit: lastabhängig Elektrischer Anschluss: 3 x 400 V/50 Hz, Schutzerdung, inkl. 16 A CEE-Stecker und 4 m Anschlusskabel Motorleistung: 0,75 kW Lackierung: Blaugrau RAL 7031 Aggregatplatzierung: integriert im Hubtisch Bedienbox: Totmann-Steuerung inkl. 2 m Kabel Gesamtgewicht: ca. 160 kg Standardausführung: Die Hubtische entsprechen der Norm EN 1570 E und sind mit dem CE-Zeichen versehen. Sämtliche Stahlteile werden gereinigt, mit einer Rostschutzgrundierung versehen und mit einem Zwei-Komponenten-Polyurethanlack beschichtet. Die Hubtische sind serienmäßig mit umlaufenden Sicherheitsabschaltleisten aus Aluminium sowie mit Montagestützen für Wartungs- und Reparaturarbeiten ausgestattet. Unsere Hubtische sind für circa 5 volle Hübe pro Stunde bei voller Auslastung im 8-Stunden-Betrieb pro Tag ausgelegt. Für höhere Beanspruchungen bieten wir Sonderausführungen an. Gewährleistung: 1 Jahr auf Ersatzteile bei sachgemäßem Einschichtbetrieb, ausgenommen Lohnkosten. --- Hedpfxsgqu A To Adqjnu English Translation (Professional Market Description): Technical Description – Key Specifications: Load Capacity: 1000 kg static distributed load Usable Lift: 810 mm Closed Height: 200 mm Overall Height: 1010 mm Platform Length: 1300 mm Platform Width: 800 mm Material: Smooth sheet steel Lifting Time: approx. 16 seconds for full stroke Lowering Time: load-dependent Power Supply: 3 x 400 V/50 Hz + protective earth, incl. 16 A CEE plug and 4 m cable Motor Power: 0.75 kW Finish: Blue-grey RAL 7031 Power Unit Placement: integrated into the lift table Control Box: Dead-man control incl. 2 m cable Total Weight: approx. 160 kg Standard Version: The lift tables comply with EN 1570 E and are CE-marked. All steel parts are cleaned, primed with anti-corrosive coating, and finished with two-component polyurethane paint. The lift tables are equipped as standard with all-round aluminium safety shutdown bars and maintenance supports for servicing and repair. Our lift tables are designed for approx. 5 full cycles per hour at full load in an 8-hour shift per day. For more intensive use, we offer special lift tables. Warranty: 1 year on spare parts under proper single-shift operation, excluding labor costs.

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, The LAS 22 is a compact desktop unit with a small working area, making it ideal for marking small components. Thanks to its compact design, the system is highly practical and can be used virtually anywhere. The device is very easy to operate, even without programming knowledge. With the powerful laser software, text, numbers, 2D codes, QR codes, and logos can be created with just a few clicks, no advanced programming skills required. The software can automatically increment serial and article numbers after initial setup. Additionally, the software is capable of importing data (such as variable information like drawing numbers, project names, etc.) from existing tables and transferring it automatically into predefined fields. A hand scanner can also be integrated. Standard equipment includes a laptop with a Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical components. - Fiber laser 30 Watt (Option: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x 110 mm - Marking software EZCAD in German / English - Pilot laser (easy preview/contour preview) - Focus finder (simple focusing) - Max. component height approx. 95 mm - Grid holes for fixtures - Clamping surface 310 x 190mm Hedpfjwkpxkjx Adqenu - Electrically adjustable Z-axis - Electric door with pinch protection stop - Optional: extraction unit (incl. activated carbon filter) - Optional: 3-jaw chuck for marking cylindrical parts - Welded steel sheet construction - Connection 230V - Air-cooled - Laptop with Windows operating system (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, different lengths available upon request Hjdpfx Adsgrn U Ssqonu - Length 3000 mm with 3 support legs - Roller conveyor with scale, manual measuring system featuring adjustable and foldable length stop incl. magnifying glass for reading measurements - Roller and measuring track suitable for lighter plastic, aluminum, and steel profiles - The maximum measuring length is the track length minus 250 mm - Carrying rollers, roller diameter 50x1.5 mm, galvanized steel tube - Axle diameter 8 mm - Track width 390 mm, usable roller width 300 mm - Load capacity per meter of roller conveyor approx. 100 kg/m - Roller pitch approx. 290 mm - Track height adjustable from 770–1070 mm - All parts are painted, color silver-grey RAL 7042, feet anthracite grey RAL 7016

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, en-001 Hsdpfx Adjunh H Soqenu

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, TECHNICAL DATA – Demonstration machine from showroom Roller carriage length: 3200 mm Cutting length: 3400 mm Maximum cutting height: 155 mm at 90°, 105 mm at 46° Cutting width, rip fence: 1030 mm Maximum saw blade diameter: 450 mm Saw blade retractable below the table: Ø 400 mm Table size, cast iron table: 1200 x 655 mm Table extension: additional 750 x 655 mm Hnjdpfxsgz Hx Ds Adqsu Table width extension: 1200 x 655 mm Table height +/- 20 mm: 900 mm Main saw blade speed: 3000 / 4000 / 5000 / 6000 rpm Net weight: approx. 1051 kg TECHNICAL DESCRIPTION Robust German engineering Suitable for edging, cross-cutting, sizing, mitre cutting, etc. Stable and self-supporting machine body constructed as a solid welded frame from thick-walled steel profiles, laser-processed steel sheets, and precisely machined Rigid, finely planed cast iron table mounted on the machine body The sturdy and powerful saw unit, installed in the machine base, ensures precise cuts The complete saw shaft assembly is dynamically balanced; double-guided, cast iron tilt segments with double column guide for height adjustment, and the double ball-bearing long circular saw shaft guarantee absolute smooth running Ball-bearing double roller carriage is smooth-running and maintenance-free; precise, backlash-free movement along the entire length, guided by hardened and ground round steel rails with remote locking in 50 mm increments Stable yet lightweight cross-slide made from steel profiles, with a support roller at the outer narrow side; cross-slide extension on the wide side extendable up to 250 mm Length stop on the cross-slide with mm scale and telescopic extension, extendable up to 3500 mm; equipped with 2 robust and backlash-free adjustable stop flaps, 1 end stop with support for long strips; length stop can be used as an angle mitre stop on both sides, steplessly adjustable from 0° to 46° with mechanical length compensation; all common mitre angles (15°, 22.5°, 30°, 45°) can be quickly set via a locking system Rip fence with cutting width of 1030 mm to the right of the saw blade, fine adjustment, easily adjusted and locked manually; dimension display via easy-to-read mm scale on adjustable rule carrier Table width extension: 1200 x 600 mm and table extension: 750 x 655 mm Operation at the machine body via 4.3" touchscreen control for cutting height, tilt adjustment, and speed Electromotive height and tilt adjustment by touch buttons Saw blade tilt range: 0° – 46° APA quick-release saw blade system Main saw blade speed: 3000 / 4000 / 5000 / 6000 rpm Safety guard swings away on both sides, guard hood with interchangeable wide/narrow inserts for saw blades up to Ø 450 mm Pushbutton control with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400 mm retractable below the table Extraction port: Ø 120 mm on machine body, Ø 80 mm on guard hood Roller carriage, length stop, and rip fence profile anodised CE compliant GS tested

Kondisi: baru, Tahun pembuatan: 2024, 4 UNITS AVAILABLE FOR QUICK DELIVERY with 15 shelves (shelf surface: beading rubber) Dimensions (LxWxH): 910 mm x 700 mm x 1850 mm Shelf depth: 510 mm Shelf width: min. 500 mm - max. approx. 2000 mm Clear spacing between shelves: approx. 78 mm Hnodpfx Aegmht Sedqsu Load capacity, max. approx. 600 kg evenly distributed Load capacity per rack: approx. 40 kg Weight: approx. 90 kg