Beli Ruang Udara bekas (13.025)

Kondisi: sangat baik (bekas), espec-tpc-212d-highly-accelerated-stress-test-chamber-double-cha mber-used-machineseeker-en-2024 Isdpfx Abowl D Aao Iea

Kondisi: sangat baik (bekas), Primus Engineering Type: DST 350 This test system is designed for conducting IP protection class tests "Dust" according to standards such as DIN 40050 Part 9 and DIN EN 60529. The test system is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI - Control panel with display and buttons - Manual regulators - Pre-programmed test cycles - Integrated vacuum circuit with flow measurement Technical data: - Total electrical power: Max. 5 kW - Connection voltage: 400V/50Hz 3-N/PE (16A EEC socket) - Dimensions: width approx. 920 mm, depth approx. 710 mm, height approx. 1770 mm - Test chamber dimensions: width approx. 700 mm, depth approx. 650 mm, height approx. 770 mm - Chamber volume: approx. 350 l - Weight: approx. 200 kg - Vacuum: 0 to -100 mbar - Suction air flow: 0 up to approx. 5 l/min - Operating climate: Temperature: +12 °C to +30 °C, Humidity: 25% rel. to 75% rel., non-condensing Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: - Dust-protected IP5X and IP5KX Iodpfx Abort U Nuj Ioa - Dust-tight IP6X and IP6KX - with and without vacuum Condition: used Scope of delivery: (see image) (Specifications subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Kondisi: sangat baik (bekas), Here we offer a temperature test chamber. Feutron temperature test chamber, air-cooled Test chamber nominal volume: 280 liters Dimensions: Test chamber external: Width 1540 mm x Height 2090 mm x Depth 1240 mm Isdjqxavaepfx Ab Isa With fan motor and door removed: Width 1540 mm x Height 1940 mm x Depth 925 mm Test space: Width 720 mm x Height 690 mm x Depth 560 mm Door opening (clear width): Width 720 mm x Height 690 mm Heated viewing window: Width 500 mm x Height 600 mm Installation dimensions of the chamber with doors open: Width 2340 mm x Height 2090 mm x Depth 2165 mm Feedthrough openings: 2 pieces, left side wall, ∅ 100 mm Temperature range: -70°C to +180°C Heating rate: 3.0 K/min Cooling rate: 3.0 K/min Power connection: 400 V 3/N/PE, AC, 50 Hz Max. power consumption: 6.3 kW Weight: 635 kg Type: 3416/17 Refrigerants: R507 / R23 For your safety as a buyer, please note the following information! The following procedures are carried out in advance for the chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data and details!) We will gladly answer any further questions by phone.

Kondisi: sangat baik (bekas), Feutron temperature test chamber We offer a temperature test chamber here. Feutron temperature test chamber, air-cooled Test chamber nominal volume: 280 liters Dimensions Chamber external: 1500 x 2040 x 1075 mm With fan motor and door dismantled: 1500 x 1940 x 925 mm Test chamber: 720 x 690 x 560 mm Door clear opening: 720 x 690 mm Viewing window, heated: 500 x 600 mm Temperature range Isdpfx Absk Scxme Ija -70°C to +180°C Heating rate: 4.0 K/min Cooling rate: 0.6 K/min Power supply: 400 V 3/N/PE, AC, 50 Hz Max. power requirement: 6.3 kW Weight: 600 kg Type: 3416/17 Refrigerants: R507 / R23 For your safety as a buyer, please note the following information! The following actions are carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run using calibrated measuring instruments. Condition: used Scope of delivery: (See images) (Specifications subject to change and errors reserved!) If you have further questions, we are happy to answer them by phone.

Kondisi: baik (bekas), Here we offer an S & A test chamber for parametric testing. Temperature range: -55°C to 200°C (using LCO2) -65°C to 200°C (using LN2) Temperature change rate: 15°C/min (standard option) 60°C/min (fast option) Stability: ±0.2°C (including effects of mains voltage, ambient temperature between 15°C and 45°C, and aging) Uniformity: ±1.0°C max from -65°C to -55°C ±0.5°C max from -55°C to +125°C ±1.0°C max from +125°C to +200°C Coolant: LCO2 The chamber can be remotely controlled via IEEE bus or RS232C interface. Weight approx. 61 kg Type: 4365A Iedpfx Abjcnic Ds Isa Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical data and specifications!) If you have any further questions, we will be happy to answer them by phone.

Kondisi: sangat baik (bekas), Here we offer a Weiss climate test chamber. Model: SB2/500/80, water-cooled Cooling/heating range: -75°C to +180°C Climatic operation: +10°C to +95°C Humidity range: 10% to 98% r.h. Temperature stability, temporal: ±0.2K Humidity stability: ±1% r.h. Temperature change rate: Cooling: approx. 1.4 K/min Heating: approx. 2.5 K/min External dimensions: Height: 1980 mm, Width: 1265 mm, Depth: 1365 mm Feedthroughs: Left side: ∅ 100 mm Right side: ∅ 50 mm Mains connection: 400V / 3Ph + N + PE / 50 Hz Power: 10.4 kVA Isdpfxsm Tvzce Ab Isa Weight: approx. 720 kg Refrigerants: R404a / R23 For your safety as the buyer, please note the following information! The following procedures are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspections, the chambers undergo a test run monitored with calibrated equipment. Type: SB2/500/80 Condition: used Scope of delivery: (see picture) (Specifications subject to change and error!) We are happy to answer any further questions you may have by phone.

Kondisi: baik (bekas), Heraeus Vötsch Model: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Ijdpfxoun Izcs Ab Ioa Rated power: 10 kW; Rated current: 21 A Sound level at 1 meter distance (free field measurement): < 69 dB(A) Lateral feedthrough: 5.5 cm / 12.5 cm Chamber is water-cooled Refrigerant: R-404A and R23 Weight approx. 570 kg For your safety as a buyer, please note the following information! The following measures are taken in advance for our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a trial run monitored with calibrated devices. Condition: used Scope of delivery: (See picture) (Technical data and information subject to change and error!) For further questions, feel free to contact us by phone.

Kondisi: sangat baik (bekas), Espec Type: PHP - J3 Technical Data: Air-cooled Temperature and humidity range: room temperature +10°C to +100°C / 40 to 98% relative humidity Temperature fluctuation: ±0.3 K Humidity fluctuation: ±2.5% Internal volume: 398 liters Dimensions: Internal dimensions: width 600 mm x height 830 mm x depth 800 mm External dimensions: width 1010 mm x height 1690 mm x depth 1273 mm Mains voltage: 400 VAC 3-phase 50 Hz Maximum current: 400 VAC 8.3 A Weight: 335 kg Scope of delivery: Espec climate test chamber Isdpfx Abetzbzcs Ioa For your safety as a buyer, the following information applies! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and errors reserved!) For further questions, feel free to contact us by phone.

Kondisi: sangat baik (bekas), Espec Type: PHP - J3 Technical Data: Air-cooled Temperature and humidity range: ambient temperature +10°C to +100°C / 40 to 98% relative humidity Temperature fluctuation: ±0.3 K Humidity fluctuation: ±2.5% Chamber volume: 398 liters Dimensions: Internal dimensions: width 600 mm x height 830 mm x depth 800 mm External dimensions: width 1010 mm x height 1690 mm x depth 1273 mm Mains voltage: 400 VAC 3-phase 50 Hz Max current: 400 VAC 8.3 A Weight: 335 kg Scope of delivery: Espec climate test chamber For your safety as a buyer, please note the following information! The following actions are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) Iodpfotzbz Ajx Ab Iea (Technical data subject to change and errors excepted!) If you have further questions, we would be happy to answer them by phone.

Kondisi: sangat baik (bekas), Feutron Model: 3416/17 Temperature Test Chamber, Air-Cooled Test Chamber Nominal Volume: 280 liters Dimensions: External Dimensions (Test Chamber): Width 1540 mm x Height 2090 mm x Depth 1240 mm With Fan Motor and Door Removed: Width 1540 mm x Height 1940 mm x Depth 925 mm Test Chamber (Internal): Width 720 mm x Height 690 mm x Depth 560 mm Door, Clear Opening: Width 720 mm x Height 690 mm Observation Window, Heated: Width 500 mm x Height 600 mm Installation Dimensions of Temperature Test Chamber with Doors Open: Width 2340 mm x Height 2090 mm x Depth 2165 mm Feedthroughs: 2 units on left sidewall, each ∅ 100 mm Temperature Range: -70°C to +180°C Heating Rate: 3.0 K/min Cooling Rate: 3.0 K/min Power Supply: 400 V 3/N/PE, AC, 50 Hz Power Consumption (max.): 6.3 kW Weight: 635 kg Refrigerant: R507 / R23 Condition: used Scope of delivery: (see image) (Specifications and technical data are subject to change and errors excepted!) If you have further questions, please feel free to contact us by phone. Ijdpfx Abju E N Tij Ioa

Kondisi: sangat baik (bekas), Heraeus Vötsch Model: VCS 7018-5 Climatic Test Chamber with Humidity, Water-Cooled Test Chamber Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing Dimensions: Width 870 mm x Depth 1280 mm x Height 1775 mm Technical Data for Temperature Testing: Iedpfxev N Hc Es Ab Ija Temperature Range: -70°C to +180°C Temporal tolerance: ± 0.1 to ± 0.5 K Spatial tolerance: ± 0.5 to ± 2.0 K Temperature gradient: 1 to 4 K Temperature change rate according to IEC 60068-3-5 Heating: 7.5 K/min Cooling: 7.5 K/min Technical Data for Climatic Testing: Temperature Range: +10 to +95°C Humidity range: 10 to 98% r.h. Temperature deviation (temporal): ± 0.1 to ± 0.3 K Temperature deviation (spatial): ± 0.5 to ± 1 K Temperature gradient: 1 to 2 K Humidity fluctuation (temporal): ± 1 to ± 3% r.h. Dew point range: -3 to +94°C Electrical connection: Rated voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 10 kW Rated current: 21 A Fuse: 32 A slow-blow, on site Refrigerant: R-404A / R-23 Test chamber volume: approx. 190 liters Weight: approx. 460 kg For your peace of mind as a buyer, please note the following: The following procedures are carried out on all our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see photo) (Specifications and information subject to changes and errors!) If you have any further questions, we are happy to answer them by phone.

Kondisi: baik (bekas), Type: VCS 7034-5 Climate Test Chamber, Water-Cooled Manufacturer: Vötsch VCS 7034-5 Test Chamber Volume: 335 liters Performance Specifications for Temperature Testing - Temperature Range: -70 to +180°C Isdexmhycspfx Ab Iea - Temporal Temperature Deviation K: ±0.1 to ±0.5 - Spatial Temperature Deviation K: ±0.5 to ±2.0 - Temperature Gradient: 1 to 4 K - Rate of Change: - Cooling: 6.7 K/min - Heating: 6.8 K/min - Heat Compensation at +20°C: 3000 W / at -20°C: 3000 W - Temperature Calibration Points: +23°C and +80°C Performance Specifications for Climate Testing - Temperature Range: +10 to +95°C - Temporal Temperature Deviation: ±0.1 to ±0.3 K - Spatial Temperature Deviation: ±0.5 to ±1.0 K - Temperature Gradient: 1 to 2 K - Humidity Range: 10 to 98% - Temporal Humidity Deviation: ±1 to ±3% - Dew Point Range: -3 to +94°C - Heat Compensation: 400 W - Climate Calibration Points: +23°C / 50% RH and +95°C / 50% RH Test Chamber Dimensions: Width 580 mm x Depth 765 mm x Height 750 mm External Dimensions: Width 870 mm x Depth 1595 mm x Height 1775 mm Electrical Connection: 3/N/PE AC, 400 V ±10% 50 Hz Nominal Power: 10 kW Nominal Current: 21 A Sound Pressure Level: 64 dB(A) Cooling Water Consumption: 1.4 m³/h Refrigerant: R452A / R-23 Important Safety Information for Buyers! The following procedures are carried out on all chambers prior to sale: 1. Functional inspection and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run Condition: Used Scope of delivery: (See images) (Specifications subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Kondisi: baik (bekas), Vötsch Vötsch Climate Test Chamber, Air-Cooled converted to R-452a Specifications for Temperature Testing: Temperature range: -40 °C to +180 °C temporal accuracy: ±0.1 to ±0.5 K spatial accuracy: ±0.5 to ±1.5 K Temperature change rate according to IEC 60068-3-5 Heating: 3.2 K/min. Cooling: 3.5 K/min. Specifications for Climate Testing: Temperature range: -40 °C to +180 °C temporal accuracy: ±0.1 to ±0.3 K spatial accuracy: ±0.5 to ±1.0 K Humidity range: 10% to 98% r.h. Test chamber internal dimensions: Width 580 x Depth 765 x Height 750 mm Ijdpfx Aboxbrkhe Ija Housing dimensions: Width 780 x Depth 1758 x Height 1800 mm Electrical connection: Rated voltage: 3/N/PE AC 400V +6/-10% 50Hz Rated power: 4.9 kW Rated current: 9 A Refrigerant: R-452a Test chamber volume: approx. 335 liters Weight: approx. 515 kg net For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If needed, new refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Subject to change and errors in the technical data and information!) If you have further questions, we will be happy to answer them by phone.

Kondisi: sangat baik (bekas), CTS Climate Test Chamber C-55/1000 Li Water-cooled Temperature range: -50°C to +100°C Humidity range: 5 to 95% rH Dew point range: 5°C to +78°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Rated current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 Model designation of the CTS chamber series is composed as follows: Example: Type C -55/1000/Li 1) C means: Climate 2) -55 means: lower temperature limit -55 °C 3) 1000 means: 1000 liters test chamber volume 4) Li means: Special equipment for testing with lithium-ion batteries Control: 32-bit controller LCD operating unit Digital display of setpoints and actual values Numeric entry of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for customer-specific test specimen actuation Test chamber lighting: Energy-efficient, high-performance LED light strip mounted on the door Shelf: Stainless steel, support area 970 x 980 mm Max. load per shelf 35 kg Total load with max. shelf configuration 100 kg 1a port NW50 1b port 2x NW125 1c port 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K over time Iedpfeva Hi Hsx Ab Ija Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat compensation approx. 4000 W at +20°C approx. 2200 W at -40°C Climate tests: Temperature range +5 °C to +95 °C Humidity range 5% to 95% relative humidity Dew point range +5°C to 78°C Temperature deviation ≤ ±1.0 K over time Humidity deviation ≤ ±3.0 % rH over time Technical data refer to ambient temperature of +25 °C, rated voltage 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect performance data. Dimensions: Test volume 1000 liters Test chamber internal dimensions (approx.): Height 1000 mm, Width 860 mm, Depth 1100 mm External dimensions (approx.): Height 1950 mm, Width 1270 mm, Depth 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated current 18 A Rated power 9.5 kW Protection rating IP 54 Sound pressure level < 58 dB(A) (measured according to DIN EN ISO 3744, at 1m distance from the front) Weight approx. 1000 kg Heat emission into installation room 10.4 kW Cooling unit: Water-cooled, low-noise, fully hermetic Stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Important safety information for buyers! The following measures are performed on chambers we offer before delivery: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See image) (Specifications and technical data are subject to change and errors!) We are happy to answer further questions by phone.

Kondisi: sangat baik (bekas), Heraeus Vötsch Type: VTS 7027-15 Ijdpfx Aowl Argsb Ija Vötsch Temperature Test Chamber, Water-Cooled Temperature Range: -70°C to +180°C Rate of Temperature Change: Temporal Temperature Deviation: ± 0.3 to ± 0.8 K Spatial Temperature Deviation: ± 0.5 to ± 2.0 K Cooling Rate: 18.0 K/min Heating Rate: 17.0 K/min Test Chamber Dimensions (W x D x H): 580 x 620 x 950 mm External Dimensions (W x D x H): 870 x 1895 x 1775 mm Side Feedthroughs: 1 x 60 mm diameter and 2 x 120 mm diameter Voltage: 3/N/PE AC 400V ±10% 50Hz Rated Power: 16 kW Rated Current: 31 A Refrigerants: R452A / R23 Approx. 270 liters Weight: 835 kg Safety Information for Buyers: The following procedures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful checking, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data and information!) For further questions, feel free to contact us by phone.

Kondisi: sangat baik (bekas), Heraeus shock test chamber We are offering a shock test chamber here. Temperature shock test cabinet, water-cooled Two-chamber version Hot chamber: The temperature range of the hot chamber is from +50°C to +220°C Temporal temperature deviation in the center of the usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate Heating: 11 K/min Cold chamber: The temperature range of the cold chamber is from -65°C to +70°C Temporal temperature deviation in the center of the usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Test chamber dimensions: width 470 mm, depth 650 mm, height 410 mm External dimensions: width 930 mm, depth 2115 mm, height 1970+ mm Nominal power: 10 kW Nominal current: 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant: R404A / R23 Weight: 1000 kg Important safety information for you as the buyer! The following procedures are performed in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a test run monitored with calibrated devices. Type: HT 7012 S2 Condition: used Scope of delivery: (see picture) (Subject to change and errors in the technical data!) For further questions, we are happy to assist you by phone. Ijdpfx Aeikvlxob Ioa

Kondisi: sangat baik (bekas), Here we offer you a chamber recirculation oven. Usable chamber dimensions: Height 900 mm / Width 600 mm / Depth 600 mm Volume: 324 liters External dimensions: Height 1775 mm / Width 900 mm / Depth 953 mm Door leaves: 1 Connection rating: 3x400V 50 Hz 10 kVA Heating output: 9 kW Rated temperature: 250°C Weight: 300 kg Type: KU 250/09-06-06 K1030852 Condition: used Iodpfx Ajigg Eujb Isa Scope of delivery: (see photo) (Subject to modifications and errors in technical data — all information without guarantee!) For further questions, we are happy to assist you by phone.

Kondisi: sangat baik (bekas), Here we offer you a Köhler salt spray chamber. Köhler salt spray chamber corrosion test chamber Köhler salt spray chamber HKT 500 Operation via touch panel Internal dimensions W x D x H (without hood): 1880 x 840 x 1210 mm Test chamber volume: 500 l Temperature range: chamber ambient temperature up to 50°C Power supply: 230V 1P/N/50Hz 3000W Type: HKT 500 WTG Iodpfx Abon Arqds Ija 400 kg Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and errors are excepted!) If you have any further questions, we will be happy to answer them by phone.

Kondisi: sangat baik (bekas), Weiss Here we offer a Weiss emissions test chamber. Mini-SHED for Diurnal Loss Measurements Test chamber dimensions: width 1600 mm x depth 2140 mm x height 2150 mm (usable 1600 mm) Housing dimensions: width 1760 mm x depth 3100 mm x height 2790 mm Maximum floor load: 250 kg Ijdpfx Abomfny Ie Ija Operating range: +18 °C ... +45 °C (at higher temperatures, SHED operation only possible without Tedlar bag) Temperature range: +18 °C ... +45 °C Temperature stability: ≤ ±1 K (over time) Rate of temperature change (heating and cooling): approx. 0.5 K/min, without test specimen Duct connection (air inlet and outlet): ∅ 80 mm, at the rear chamber wall Shut-off valve, gas-tight (air inlet and outlet): ∅ 80 mm, gas-tight, pneumatically operated. Delivery scope: Connection flange of the shut-off valve Cooling water consumption: approx. 0.8 m³/h Voltage: 230/400 V; 3 PH + N + PE; 50 Hz Rated power: 4.1 kW Rated current: 14.0 A Weight: approx. 2500 kg Type: WT 5.1'/ +18-45 Condition: used Sale from site Scope of delivery: (Only the Weiss emissions test chamber WT 5.1'/ +18-45 Mini-SHED) (Subject to technical modifications and errors. All information without guarantee!) If you have further questions, we are happy to assist you by phone.

Kondisi: sangat baik (bekas), Here we offer you a Heraeus Vötsch climatic chamber. Vötsch Climatic Chamber VCS 7033, water-cooled Temperature range: -70°C to +180°C Temperature change rate: Heating: 7.5 K/min Cooling: 6.5 K/min Humidity range: 10% to 98% RH Temperature deviation (temporal): ±0.5 K Temperature deviation (spatial): ±1.5 K Test chamber dimensions: Width 675 mm x Depth 650 mm x Height 760 mm Housing dimensions: Width 930 mm x Depth 1565 mm x Height 1840 mm Lateral feedthrough: 90 mm Ø Approx. 330 l Weight: 600 kg Voltage: 3/N/PE AC 400V ±6/-10% 50Hz Rated power: 9.5 kW Rated current: 17 A Refrigerant: R404A / R23 Type: VCS 7033 For your security as a buyer, please note the following information! The following procedures are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run monitored with calibrated devices. Isdpfjpz H Hxox Ab Iea Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) For further questions, we are happy to answer your call.

Kondisi: sangat baik (bekas), VLM Climate Corrosion Test Chamber We offer you a climate corrosion test chamber from VLM. Name: Condensation Water Test Device (Corrosion Test Cabinet) Manufacturer: VLM Korrosions-Prüftechnik GmbH Description: The chamber is designed for testing the corrosion resistance of metallic materials and surface treatments by means of salt spray corrosion tests (NSS) according to DIN 50021 SS, ASTM B 117-73, ISO 9227, and other methods and condensation tests. Chamber volume: 400 liters. Material front door: safety glass, clear shield layer on the inside. Weight: 140 kg External dimensions (W x D x H): 1100 x 670 x 1090 mm Internal test chamber dimensions (W x D x H): 800 x 605 x 920/733 mm Chamber volume: 400 l Door opening (W x H): 740 × 600 mm Maximum specimen rod load: 20 kg each Ijdpfx Abjk H Akgo Isa Operating voltage: 230 volts Frequency: 50–60 Hertz Connection: 1,850W Control range of the test chamber: max. 55 degrees Temperature controller: Microprocessor PID controller Temperature stability: ± 0.2°K LED display resolution: 0.1°C Deionized water quality: max. 20 µS/cm Humidifier water consumption: approx. 0.5 l/24 hrs Testing: approx. 0.4 l/hr Water supply pressure: 3/4" 2–4 bar Compressed air requirement: approx. 16 m³/h Type: Salt Chamber SAL 400 V.713.062.000 Condition: used Scope of delivery: (See image) (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Kondisi: sangat baik (bekas), Thermotron temperature chamber We are offering you a Thermotron temperature chamber. Water-cooled Thermotron temperature chamber SE-1000-5-5 Internal workspace dimensions (W x D x H): 102 x 100 x 97 centimeters Workspace volume: 986 liters Temperature uniformity: ± 0.5°C Iedpjirmitsfx Ab Ioa Temperature range: -70°C to 180°C Temperature control tolerance: 0.3°C External dimensions (W x D x H): 122 x 188 x 218 centimeters Electrical requirements: 400/3/50, 32.4 A Refrigerant: R-404A / R23 Approx. weight: 862 kg Type: Thermotron SE-1000-5-5 Important information for your security as a buyer! The following procedures are carried out on all chambers we offer prior to sale: 1. Functional inspection and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) If you have further questions, we are happy to answer them by phone.

Kondisi: sangat baik (bekas), Vötsch Model: VC 7018 Vötsch Climate Test Chamber VC 7018 Water-cooled Control Unit »Touch Panel« All control and operation commands can be initiated by simply touching the function icons on the »Touch Panel« control unit. Adjustable Feet To compensate for uneven floors and provide sufficient ventilation for the machine compartment, the test chamber is equipped with adjustable feet. Cable Ports The test chamber is equipped with ports on the right and left sides, allowing measurement lines and test equipment to be routed into the test chamber interior. Standard ports installed: R1: DN 125 mm L1: DN 50 mm Test Chamber Interior Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Exterior Dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Specifications for Temperature Testing: Temperature Range: -70°C to +180°C temporal deviation: ±0.1 to ±0.5 K spatial deviation: ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min. Cooling: 2.3 K/min. Specifications for Climate Testing: Temperature Range: -10°C to +95°C Humidity Range: 10% to 98% r.h. Temporal temperature deviation at the center of usable space: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Iodpfx Abowh Ttmj Ija Temporal humidity deviation at the center of usable space: ±1 to ±3 % r.h. Electrical connection: Rated voltage: 3/N/PE AC 400V ±10 50Hz Rated power: 5.9 kW Rated current: 12.0 A Connection cable: 3.5 m Protection: 16 A slow-blow, to be provided onsite Refrigerants: R-404A and R-23 Test chamber volume: approx. 190 liters Weight: approx. 460 kg net For your security as a buyer, please note the following: The following measures are carried out on all chambers we offer before delivery: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Technical data and specifications subject to change and errors reserved!) We are happy to answer any further questions by phone.

Kondisi: sangat baik (bekas), Vötsch Model: VCL 7003 Climate Test Chamber, Air-Cooled Test Chamber Volume: approx. 34 liters Performance Specifications for Temperature Testing: Temperature range: -70 to +180°C Temporal temperature fluctuation: ±0.3 to ±1.0 K Spatial temperature uniformity: ±0.5 to ±2.0 K Heating rate: 4.0 K/min Cooling rate: 3.0 K/min Maximum heat compensation: 550 W Temperature calibration points: +23°C and +80°C Performance Specifications for Climate Testing: Temperature range: +10 to +95°C Humidity range: 10 to 98% Temporal humidity deviation: ±1 to ±3% Temporal temperature deviation: ±0.3 to ±0.5 K Spatial temperature uniformity: ±0.5 to ±1.5 K Climate calibration values: +23°C / 50% r.h. and +95°C / 50% r.h. Test Chamber Dimensions (W x D x H): 350 mm x 300 mm x 310 mm External Dimensions (W x D x H): 640 mm x 750 mm x 1730 mm Electrical connection: 1/N/PE AC 230 V ±10 %, 50 Hz Rated current: 11.0 A Max. rated power: 2.5 kW Sound pressure level: 59 dB(A) Refrigerant: R-404 A / R23 Weight: approx. 130 kg Ijdpfxev Tnd Sj Ab Iea For your security as a buyer, please note the following information! The following steps are performed on all our chambers prior to sale: 1. Function check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to change and errors in technical data and information!) For further questions, please do not hesitate to contact us by phone.

Kondisi: bekas, Zwick Type: Z20 Technical data: Stroke: 200 mm Dimensions (H x W x D): 1037 x 385 x 180 mm Maximum force (Fmax): 20 kN Maximum speed (Vmax): 125 mm/s Accessories: - Clip-on extensometer 13.5 mm - Extensometer MFA 25 (temperature range up to +200°C) Isdpfx Absv Rdtws Ioa - Computer + software testXpert II V3.5 Climatic chamber: Airtemp LKG-K-TK-50-040/150 Temperature range: -40°C to +150°C Temperature change rate: 1 K/min Refrigerant: R404, 5 kg Condition: used Total weight: approx. 1500 kg Scope of delivery: (see photo) (Technical data subject to change and errors excepted!) For further questions, please contact us by phone. Written orders can be placed via email or fax.