Konveyor rol

Ruchser RUR

Kondisi: baik (bekas), Tahun pembuatan: 2007, deu-TECHNISCHE_DATEN-Max_bearbeitbare_Laenge_3200_mm_Min_bearbei tbare_Laenge_200_mm_Max_Breite_200_mm_Min_Breite_40_mm_Max_Werkst ueckhoehe_130_mm_Tiefe_bei_max_Tenonierstift_Durchmesser_320_mm_1 05_mm_Tenonierwagen_Geschwindigkeit_min_max_0_100_m_min_Profilier geschwindigkeit_min_max_3_15_m_min__TENONIEREN_1_Stirnschnittsaeg e_5_5_PS_4_kW_Saegeblatt_D_400_mm_2_Tenonierfraeser_Gegenlager_50 _x_620_mm_15_PS_11_3_kW_Max_Werkzeugdurchmesser_320_mm_Achshub_57 5_mm_Automatischer_Ausrei_sschutz_3_Tenonierfraeser_Gegenlager_50 _x_620_mm_15_PS_11_3_kW_Max_Werkzeugdurchmesser_320_mm_Achshub_57 5_mm_Automatischer_Ausrei_sschutz_Vertikale_Positionierung_mit_du rchgehender_Achse_4_Digitale_Winkelverstellungsspannvorrichtung_P ROFILIEREN_5_Profilierfraeser_rechts_Schaft_50_x_320_mm_10_PS_7_5 _kW_Werkzeugdurchmesser_130_240_mm_Achshub_280_mm_Zeitversetzter_ Anti_Ausbraakschutz_bei_Kalibrierung_Doppelte_Drehrichtung_Vertik ale_und_horizontale_Positionierung_mit_durchgehender_Achse_6_Prof ilierfraeser_rechts_Schaft_50_x_320_mm_10_PS_7_5_kW_Werkzeugdurch messer_130_240_mm_Achshub_280_mm_Vertikale_und_horizontale_Positi onierung_mit_durchgehender_Achse_7_Profilierfraeser_rechts_Schaft _50_x_320_mm_10_PS_7_5_kW_Werkzeugdurchmesser_130_240_mm_Vertikal e_und_horizontale_Positionierung_mit_durchgehender_Achse_8_Restte ilrueckgewinnungsgruppe_Vertikale_und_horizontale_Positionierung_ mit_durchgehender_Achse_Vorrichtung_zum_Fluegelauszug_Hfutwt78Z_9 _Untere_horizontale_Nutwelle_Vertikale_und_horizontale_Positionie rung_mit_durchgehender_Achse_88_5_PS_66_4_kW_10_Digitale_Fuehrung _11_Ruecklauf_der_Werkstuecke_zum_Bediener Rjdpfxet R T Hcs Ahwsp

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Meja Perakitan Daun Rotox, tahun pembuatan 2017; pengumpan sekrup otomatis, tinggi obeng dapat diatur, alat penekuk fitting (Maco), unit bor sudut, rak aksesori fitting Rjdpfx Asx Rtpashwep

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 600 mm, tinggi kerja: 900 mm, penggerak gergaji: 7.500 W, Swiveling (45°) saw Equipped with a 6-meter pusher Redpfx Ahewzg E Njwsp Chain unloading deck with 6-strand loading chains for faster loading Machine overhauled and fitted with a new digital touchscreen

Kondisi: sangat baik (bekas), sliding table saw Robland 3200 Silver Line scoring unit with separate motor, carriage length: 320 cm Rsdpfjv S Hy Aex Ahwep main motor: 7 kW 3 spindle speeds max. blade diameter: 450 mm blade tilt: 0–45° electrically adjustable with digital readout blade height adjustment: electric, without readout rip fence on the right, motorized adjustment up to 1240 mm digital readouts for the fence on the carriage angle cutting device included Brand-name machine in very good condition,

Kondisi: baru, Tahun pembuatan: 2026, Construction size: 5 Rated thermal output: 145 kW -- BImSchV Stage 2 and CE compliant -- Combustion chamber fully lined with fireclay For rooms up to: 3,800 m³ (according to DIN standards) Fuel types: Firewood, chipboard, wood chips, wood briquettes Fuel consumption: 35 - 40 kg/h Fan air output, free-blowing: 9,400 m³/h Air outlet opening: Ø 700 mm Flue pipe connection: Ø 220 mm Weight: 1,950 kg Rjdpfxsdlhcre Ahwop PLC control cabinet: 380 Volt

Kondisi: sangat baik (bekas), Four-sided planer SCM Compact XL - Planing width: 23 cm - Planing height: 13 cm Redpfx Ajlat Hdehwep - Electric adjustment of top head and feed rollers - All spindles adjustable vertically and horizontally - Bottom spindle 4 kW, right and left each with 7.5 kW motor, top 5.5 kW, universal spindle 5.5 kW Machine in very good condition

Tahun pembuatan: 1998, Kondisi: sangat baik (bekas), I am selling a complete window manufacturing set: Redpfxsfzzhyj Ahwop - 1 unit tenoning and slotting machine Weinig Unitec 10 - 1 unit profiling and overlay centre Weinig Univar 10 - Year of manufacture: 1998 - Cutter heads by OERTLI - Available immediately - Total price: 17,000 EUR - Condition: very good

Kondisi: bekas, en-horizontal-impregnation-system-pro-flow-single-parts-with-flu shing-circuit-length-2700-mm-width-1100-mm-height-850-+-150-mm-mo tor-power-0.37-kw-electrical-power-0.5-kw-compressed-air-6-bar--- functional-features-machine-for-horizontal-flooding-of-individual -parts-product-is-dispensed-through-a-row-of-nozzles-excess-produ ct-is-blown-off-by-air-nozzles-the-pump-and-air-nozzles-are-autom atically-controlled-and-are-activated-only-when-the-workpiece-pas ses-through-this-reduces-compressed-air-consumption-the-circulati on-mode-ensures-minimal-product-usage---design-features-structure -sturdy-steel-frame-coated-with-high-strength-water-soluble-produ cts-machine-body-made-of-heat-sealed-thick-polypropylene-panels-f our-independent-chambers-for-infeed-impregnation-blow-off-and-out feed-horizontal-transport-of-workpieces-by-motor-driven-grooved-p lastic-rollers-frequency-inverter-for-speed-control-and-adjustmen t-transmission-exclusive-system-ensures-all-transmissions-are-arr anged-outside-the-impregnation-chamber-for-easy-access-this-allow s-for-longer-operating-times-and-eases-maintenance-tasks-movable- parts-are-protected-by-covers-and-appropriate-seals-circulation-p ump-pneumatic-double-diaphragm-pump-with-valves-seals-and-diaphra gms-made-of-nitrile-rubber-housing-made-of-pvdf-plastic-material- air-nozzles-first-chamber-features-a-blow-off-system-to-prevent-p roduct-leaks-a-second-blow-off-system-after-the-impregnation-cham ber-removes-excess-product-from-the-workpiece-electrical-control- panel-complies-with-ce-ip55-protection-includes-frequency-inverte r-to-adjust-the-conveying-speed-technical-data-length-mm-2700-wid th-mm-1100-conveying-speed-min-max-m-min-3-6-drive-motor-power-kw -0.37-installed-electrical-power-kw-0.5-distance-between-infeed-a nd-outfeed-rollers-mm-2520-working-height-adjustable-mm-850-+-150 -minimum-length-of-workpieces-to-impregnate-mm-250-maximum-width- of-workpieces-to-impregnate-mm-300-maximum-height-of-workpieces-t o-impregnate-mm-250-compressed-air-consumption-l-min-2000-require d-compressed-air-pressure-bar-6-equipment-and-included-accessorie s-flushing-circuit-for-pro-flow---price-of-the-above-mentioned-ma chine-on-request-plus-packaging-and-shipping---technical-data-as- stated-by-the-manufacturer-no-liability-illustrations-may-differ- from-the-original-prices-net-plus-vat-domestic-market) Redpfx Asnl Nqqohwop

Kondisi: baru, Glass beading nailer "2 P Jumbo Automatic E.C." – New – Your advantages: - Corner joints are closed - No open glazing bead joints Rodsvnh T Nepfx Ahwjp - No color differences when painting - Glazing bead frames can be easily assigned Staple Corner Joining Machine 2P Jumbo Automatic E.C. for stapling glazing bead frames. Choice between automatic and manual operation; With angle stop, clamping device from above and in front Pressure adjustable separately. Insertion of parallel and stacked staples possible via electronic programming control. Stapler can be mounted on a suitable worktable, Operation via foot pedal. ----- Price for this configuration on request! Plus statutory VAT as well as packaging/shipping ----- Images show the Staple Corner Joining Machine 2P with the optional mobile worktable (see details under surcharges) Surcharges: ----- Mobile worktable Height adjustable from 700 - 1000 mm, 2 removable support rails 1000 mm long, 2 swiveling and adjustable support rails 1000 mm, support rails covered with felt, 4 swivel castors, 2 with brakes. ----- Surcharge: 1,321.00 EUR net Staples: Packs 15 mm staples (pack of 2,000 pcs.): Price 22.00 EUR 12 mm staples (pack of 3,000 pcs.): Price 32.00 EUR 10 mm staples (pack of 3,000 pcs.): Price 32.00 EUR Dimensions and Weights ----- Jumbo Automatic E.C. 470 x 370 x 300 mm, 35 kg Worktable 32 kg All prices net. Plus statutory VAT. Ex works, plus packaging and shipping (Technical data as per manufacturer – no guarantee!)

Kondisi: sangat baik (bekas), BRIDGE LOADER with DOUBLE LOADING STATION Vacuum system (with its own pump) No. 4 vertical support columns for the upper crossbeam No. 1 upper horizontal crossbeam (for the movement of the motorized trolley) No. 1 motorized trolley, to which horizontal arms are connected No. 2 horizontal metal arms with adjustable vacuum suction cups No. 2 floor rollers for feeding panel stacks into the Loader No. 1 motorized roller table that feeds panels to the Unloader, also equipped with several crosswise motorized conveyor belts (at 90°). Approx. dimensions: 7232 mm. Separate electrical and control panel OMRON electronic control Perimeter safety and protection metal fences Working capacity (cycles/minute): approx. 16 - 20 Min./max. panel thickness: approx. 10 – 50 mm Minimum panel size: approx. 250 x 320 mm Redpfxjd Rg Dpj Ahwsp Maximum panel size: approx. 1200 x 3200 mm Installed power: 23.3 kW