Beli Strand Pelletizer bekas (410)

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, de Godpfx Agswm Nq Esrouc

Tahun pembuatan: 2025, Kondisi: baru, Stock no. 2846 Compounder Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, tight-intermeshing, Barrel water-/media-cooled/tempered Throughput capacity up to 1,200 kg/h – depending on material Drive 250 kW – AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeder type ZS-B Siemens touch HMI control system OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand (ST), water ring (WRG), or underwater pelletizing (UWG) > Screw configuration according to your requirements > Material dosing: volumetric or gravimetric Gedpfod Hqa Iox Agreuc > Additional accessories Visit us at our Wuppertal facility. The system is ready for demonstration; test runs with your material can be scheduled upon request.

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2846, Stock no. 2846 Compounder Extruder Guodpfxsi Dtbio Agroc Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, tight-intermeshing, Barrel water-/media-cooled/tempered Throughput capacity up to 1,200 kg/h – depending on material Drive 250 kW – AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeder type ZS-B Siemens touch HMI control system OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand (ST), water ring (WRG), or underwater pelletizing (UWG) > Screw configuration according to your requirements > Material dosing: volumetric or gravimetric > Additional accessories Visit us at our Wuppertal facility. The system is ready for demonstration; test runs with your material can be scheduled upon request.

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2846, lager2846 Guodpfx Agji Dtbueroc

Kondisi: baru, Tahun pembuatan: 2025, jam operasional: 2.846 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2846, Inventory No. 2846 Compounding extruder, ready for demonstration: Model Alphatec AD-.S 75 with: Guodpfx Asi Dtbqsgrec - Screw diameter: 72 mm - Segmented screws, co-rotating, intermeshing, barrel water/medium-cooled/temperature controlled - Throughput capacity: up to 1200 kg/h (material-dependent) - Drive: 250 kW AC - 48 L/D - 3x degassing zones – 1x vacuum pump with condensate separator - 2x side feeders, type ZS-B - Siemens HMI Touch control system OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand (ST), water ring (WRG), or underwater pelletizer (UWG) > Screw configuration according to your requirements > Material dosing units: volumetric or gravimetric > Additional accessories Visit us at our Wuppertal facility. The plant is ready for demonstration. Test runs with your material are possible by arrangement.

Tahun pembuatan: 1988, Kondisi: siap digunakan (bekas), A regeneration system from Erema is available. Components include: conveyor belt, extrusion unit, screen changer, pelletizing head (granulator), control unit, and intermediate conveying system. An on-site inspection is possible. Gsdpfow Dfgwjx Agrouc

Tahun pembuatan: 2014, jam operasional: 30.000 h, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 20526471, Laborextruder mit Doppelschnecke – Coperion ZSK 26 Mc18 (40 L/D) mit 26 mm Schneckendurchmesser Dieser Extruder besitzt alle Merkmale der ZSK Mc 18 Baureihe und eignet sich sowohl für die Rezepturentwicklung und Compound-Musterentnahmen als auch für die Produktion kleinerer Compund-Mengen bis ca. 180 kg/h. Im Vergleich zum Vorgängermodell ZSK 26 Mc ermöglicht der weiterentwickelte Laborextruder eine Durchsatzsteigerung von bis zu 100 %, da das Drehmoment auf 15 Nm/cm³ erhöht wurde. Der Extruder ist mobil und benötigt nur geringen Platz, da der Schaltschrank im Grundrahmen integriert ist. Heiz- und Kühlsysteme sind betriebsbereit installiert (Plug & Play). Maschinennummer: 20526471 Baujahr: 2012 Betriebsstunden: ca. 30.000 h Zustand: gebraucht, in Betrieb Technische Daten: Extrudertyp: Doppelschneckenextruder Modell: ZSK 26 Mc18 Prozesslänge: 40 L/D Guedpsyhd Dbjfx Agroc Antriebsleistung: 36,9 kW Stromversorgung: 3 × 400 V (−10 % / +6 %), 50 Hz ±2 % Zylinderaufbau: E-0-0-S-0-0-1-0-V-0 Ausstoß: ca. 150–200 kg/h, abhängig von Rezeptur, Rohstoff und gewünschter Produktqualität Anwendungen: Hochgefüllte Compounds, Masterbatch-Anwendungen Geeignet zur Verarbeitung von: LLDPE, LDPE, HDPE, PP, PPR, PS, ABS, PET und Biopolymeren Lieferumfang: Gravimetrische Dosierung: - K-Tron Gravimetrische Dosierer - 1 × Granulatdosierer - 1 × Pulverdosierer (Doppelschneckenausführung) Seitliche Zuführung / Entgasung: - 1 × Seitenbeschicker ZS-B25 - 1 × vakuumseitige Entgasung ZS-EG25 Vakuumsystem: Busch Vakuumpumpe Plastex MI 0120 B 222 CNX6, speziell für PET-Anwendungen ausgelegt. Bitte beachten: Vakuumpumpe ist nicht im Lieferumfang enthalten. Prozessüberwachung: - Schmelzedruck-Messsystem - Schmelzetemperatur-Messsystem - SPS-Integration Granuliersystem (Stranggranulierung): - Trocknungsanlage ist nicht im Lieferumfang enthalten - Stranggranulator SP50 - Wasserbad Peripheriegeräte: - Sackentleerstation für Granulat - Fördersystem bis zu den Dosiergeräten Ersatzteile: - Ersatzteile im Lieferumfang, 2. Schneckensatz.

Tahun pembuatan: 1999, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Due to production shutdown, complete plastic material pelletizing line for sale, comprising loading hopper, loading screw conveyor, single-screw extruder Ø105 mm equipped with force-feeding screw, dosing unit, degassing chamber, vacuum pump, drawer-type screen changer with hydraulic unit, stainless steel cooling trough, strand dryer, Buhler pelletizer, Avitech vibrating sieve, blower, cyclone, and big bag station. Screw and barrel refurbished in 2021 (invoice available). Control panel refurbished. Complete electrical cabinet included. The screw has a general-purpose profile, allowing the regranulation of mainly PE, PP, PS, ABS, and PA. Gedpfx Agju E E Ezsrjuc

Tahun pembuatan: 2024, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 04344, FABBRICAMENTE NUOVO Leistritz Serie ZSE Maxx (27 / 40 / 50) – 48 L/D – 0 Ore – Avvolto in fabbrica! Specifiche tecniche Produttore: Leistritz Extrusionstechnik GmbH Modelli disponibili: ZSE 50 Maxx ZSE 40 Maxx ZSE 27 Maxx Anno di costruzione: 2024 Condizioni: 100% nuovo di fabbrica (Zero ore di funzionamento, totalmente inutilizzato, ancora nell’imballo/origine fabbrica) Rapporto L/D: 48 L/D (Tutte le unità aggiornate direttamente da Leistritz con nuovi set completi di cilindri e nuovi alberi) Tutte le macchine sono dotate di alimentatori laterali. Descrizione Disponibili per vendita immediata singolarmente o in lotto: Tre (3) estrusori bivite Leistritz ZSE Maxx 2024 impeccabili (modelli: ZSE 50 Maxx, ZSE 40 Maxx e ZSE 27 Maxx). Queste unità erano originariamente macchine da laboratorio di proprietà Leistritz. Per soddisfare requisiti produttivi di alto livello, Leistritz ha effettuato direttamente l’upgrade di tutte e tre le unità portandole a un rapporto L/D di 48. Gli upgrade OEM includono nuovi set completi di cilindri e nuovi alberi montati direttamente in fabbrica. Tutte le unità sono in condizioni perfette, completamente nuove, con zero (0) ore di funzionamento. Sono ancora sigillate e imballate nelle casse originali dalla fabbrica: non sono mai state aperte, toccate o messe in servizio dal loro arrivo da Leistritz. Ciascuna macchina viene proposta come sistema completo chiavi in mano, fornita con sistema di alimentazione dedicato, architettura di controllo e un’ampia dotazione di attrezzature e ricambi originali. Fornitura e accessori inclusi (per ogni macchina) Sistema di alimentazione ed estrusione Alimentatore volumetrico e alimentatore laterale (con apposito carrello per alimentatore laterale) Bocche di carico Accessori downstream e testa filiera Testa filiera strand, piastre forate, portafiltri Guodpfx Aoy Ufk Rogrjc Controllo e sistema elettrico Quadro di comando completo (con macrometro integrato nel pannello operatore) Set completo di cavi di collegamento e cavi per azionamento principale Kit ricambi completo per quadro elettrico Sistema di vuoto e degasaggio Set supplementare di pompe per vuoto, tubazioni per vuoto e manometri Sistemi di riscaldamento/raffreddamento per pompe vuoto e relativi collegamenti Sensoristica, manutenzione e installazione Sensori di temperatura e pressione fusione Dispositivo per montaggio coclee, estrattori e spazzole di pulizia Barre di sollevamento, elementi di livellamento, inibitori di corrosione Riepilogo per acquirenti Modelli disponibili: ZSE 27 Maxx, ZSE 40 Maxx, ZSE 50 Maxx. Pronta consegna: nessuna attesa per tempi di produzione – disponibili subito. Garanzia OEM: tutti gli aggiornamenti e le estensioni a 48 L/D effettuati ufficialmente da Leistritz. Prezzi disponibili per singola macchina o per il pacchetto completo da tre unità. Foto degli imballi originali e della documentazione su richiesta.

Kondisi: baru, Tahun pembuatan: 2026, daya: 11 kW (14,96 hp), de Guedpoq Igyvefx Agrsc

Tahun pembuatan: 2022, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Boiler Uap Bahan Bakar Padat dan Aksesori - 3 ton/jam - 8 Bar - Ketel Uap dan Perlengkapannya Jenis Bahan Bakar Padat: Batu Bara dan Pelet Gujdpfxoy R U T Ts Agrec Sistem Penimbangan Otomatis untuk Bahan Bakar Padat Suhu Uap: 172 ºC

Kondisi: sangat baik (bekas), Tahun pembuatan: 1979, Seilproduktionslinie / Litzen-Umspullinie REDAELLI Linie FÜR SPANNBETONLITZEN AUS STABILISIERTEM BETON 3-adrige und 7-adrige Litzen, die bei Trägern mit großen Spannweiten, Brückenelementen sowie großen vorgespanntelementen wie Deckenelementen, Pfählen sowie für vorgespannte und nachgespannte Bauwerke eingesetzt werden. - Baujahr: 1979/2005 Gsdet Iq Hbspfx Agrjuc - Spulengröße: 800x900 mm - Produktionsbereich für Litzen: - 3/8 - 1/4 - 1/2 - 5/16 - 6/10 - 7/16 - 7/10 - 9/16 - Coilgewicht: 4.000 kg - Produktionsgeschwindigkeit: 40-60 m/min - Hochkohlenstoffdraht - PC-Litzengrößen: - 6,4 / 6,9 / 9,3 / 21,5 mm - Elektrische Versorgung: 400 kW Linienumfang: - Drahtabwickler - Verseilmaschine - Ofen - Kühlsystem - Zugrollen - Seilaufwicklung

Tahun pembuatan: 1997, Kondisi: baik (bekas), EVG Polybend Bügelbiegeautomat PBE 2-16 mit 2 Abwicklern – Baujahr 1997 Komplett mit neuer Steuerungseinheit – original EVG Einzeldraht: 6 – 16 mm Gedpfx Ajn Ut A Segrouc Doppeldraht: 6 – 12 mm Spannung: 400 Volt Frequenz: 50 Hz Leistung: 30 kW Baujahr: 1997

Tahun pembuatan: 2025, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, en Guedjxxim Iopfx Agrsc

Tahun pembuatan: 2014, Kondisi: bekas, Leistritz ZSE 60 MAXX-36D Lini Ekstrusi (2014) Terdiri atas: - Sistem pengumpanan dan unit dosing Koch Technik dan Scholz Dosiertechnik - Ekstruder twin-screw Leistritz ZSE 60 MAXX-36D dengan: 2x sekrup diameter 60mm Rasio L/D 36:1, ko-rotating 8 zona barel, dipanaskan secara elektrik dan didinginkan dengan air 2 port degassing Kecepatan maksimum sekrup 1200 rpm Motor 495kW dengan gearbox penggerak langsung Flender - Panel kontrol berdiri bebas dengan mikroprosesor dan instalasi kabel penghubung - BD Plast BDL double screen changer - Ettlinger ERF 200 melt pump - Econ EUP 600 pelletizer - Bak air stainless steel termasuk 2x sifter di atas kaki - Silo pencampur stainless steel Tredkamp 1C-T 10.000L - Silo pencampur Motan 14.000L di atas kaki dengan elevator - Sistem big bag Gsdjzb N Hzepfx Agreuc

Tahun pembuatan: 2021, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, 1 complete granulation line, partially overhauled and upgraded in 2025, consisting of: Gsdpfx Agezb Dp Rjrjuc Feed trough with screw conveyor (level-controlled) for 100% regrind or blending, feed screw with moving paddle and color dosing unit controlled by frequency inverter Buffer silo for film material with agitator and frequency-controlled rotary valve, as well as agitator to stuffing unit with load monitoring and adjustable reverse operation RCP horizontal stuffing unit 15 A for film and regrind, frequency-controlled. Extruder 120 mm - 38 L/D - vacuum degassing (water ring) Year of construction: 1996 — new screw 2026 / new heaters / new cooling fan 180 kW DC (frequency inverter 180 kW as spare) Kitech laser screen with 60 mesh — diameter 350 mm Control via control cabinet, year of construction 2025 Strand die with 26 holes, variable exchangeable die inserts, closeable and adaptable for different materials Strand cooling water tank with new stainless steel bearings in plastic rollers Strand blower Strand granulator SG 200 Kitech, with 5 kW drive — frequency-controlled Granulate classifier screen and conveyor blower with piping BIG BAG filling station with closure for Big-Bag change Commissioning by our technicians, details and costs on request. Inspection in Wuppertal, appointments available at short notice by arrangement.

Kondisi: sangat baik (bekas), PRIMULTINI Band Saw Line SIC 1600 – CFE - IFB 1. PRIMULTINI Band Saw SIC 1600 - Roller diameter: 1600 mm - Roller width: 245 mm - Motor: 75 kW 2. PRIMULTINI Band Saw Carriage Type CFE - 3 clamping vices - Max. log diameter: 1000 mm 3. PRIMULTINI operating cabin with complete control system Gjdpfx Ajv R Edqegrjuc 4. Complete conveyor technology - Infeed transverse conveyor, 4-strand, length approx. 12 m - Hydraulic log loader - Discharge roller conveyor, movable, with pressure rollers - Re-loading transverse conveyor - Conveyor belt under the roller conveyor for sideboards - Vibrating table for sideboards - Roller conveyor with cross transfer - Roller conveyor with cross transfer The complete line was manufactured in 1999.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, kapasitas pemanasan: 180 kW (244,73 hp), daya panas nominal: 180 kW (244,73 hp), Daya panas nominal: 180 kW Rentang daya: 45–180 kW Bahan bakar: - Cacahan kayu (G20–G60) - Serbuk gergaji - Pelet kayu - Limbah kayu dan limbah papan partikel Kadar air bahan bakar yang diizinkan: hingga sekitar 50 % Sistem pembakaran: Pembakaran dorong bawah dengan kisi ganda Tipe boiler: Boiler pipa api tiga lintasan Ruang bakar berlapis chamotte penuh Pengabu otomatis Suhu suplai maksimum: 95 °C Tekanan kerja maksimum: 6 bar Efisiensi: sekitar 85–91 % Suhu gas buang: - Beban penuh: sekitar 190 °C - Beban parsial: sekitar 130 °C Emisi CO: < 250 mg/m³ Emisi debu: < 150 mg/m³ Emisi NOx: < 100 mg/m³ (untuk kayu jarum) Dimensi dan berat: Panjang: sekitar 2.130 mm Lebar: sekitar 1.180 mm Tinggi: sekitar 2.280 mm Berat: sekitar 3.440 kg Gusdszc Uu Tjpfx Agrec Koneksi pipa asap: Ø 250 mm Koneksi masuk/keluar: DN 80 Dengan sistem pengeluaran silo Mawera RSS

Tahun pembuatan: 2009, Kondisi: bekas, The machine is connected to power and can be inspected by appointment! Technical Data / Machine Components: Year of manufacture: 12/2009 Make: PRESSTA-EISELE Voltage: 400 V Rated current: 19.2 A Operating pressure: 250 bar Dimensions: approx. 18–20 m long, approx. 3 m wide Weight, unpacked: 4.5 to 5 t Horizontal Loading Magazine: 5-strand toothed belt conveyor, toothed belt width 32 mm, with teeth on the running side 17 compartments, each 90 mm wide, for holding profiles, with carrier 40 x 10 mm (H x W) 2 sliding supports between the toothed belts as additional support Max. depth: 2,380 mm, length: 7,400 mm Max. loading weight: 1,000 kg Conveying length: 1,850 mm Minimum profile length: 1,000 mm Maximum profile length: 7,300 mm Common drive via geared motor: 0.55 kW, 400 V, 50 Hz Conveying speed: 4 m/min Material stop left 'Magazine empty' sensor, manual step Touch switch for initial loading 5 pneumatic cylinders for aligning profiles in the longitudinal direction 6 lifting rollers for raising the profile from the loading magazine and transferring to the pusher Pusher, electronically positionable feed system: Reinforced design Max. feed length: 9,000 mm Mounted on the right side of the machine Profile feed from right to left Guide profile with linear guide rail Gujdpfjzbac Tex Agroc Carriage plate construction with recirculating ball bearings Drive via linear motor, positioning via magnetic tape Pneumatic material gripper All 8 profiles can be automatically clamped without manual adjustment Repeat accuracy: +/- 0.15 mm Max. rapid traverse speed: 180 m/min Input of the profile tube length in the control system 1 light barrier for detecting the profile start before the first punching head Punching Unit: Hydraulic drive Punching force per cylinder: 3.0 t, designed for 55 punches per minute Maximum of 2 tools in operation Vertical punching head with 2 cylinders Punching stroke 15 mm, incl. 2 punching tools for Ø 6.5 mm holes, 65 mm pitch Punching cylinders can be individually actuated, guide for profile 2 horizontal punching heads Punching stroke 15 mm, each incl. 1 punching tool for Ø 6.5 mm hole and 1 punching tool for slotted hole 7 x 12 mm, guide for profile Cycle spray unit with 4 nozzles for punch lubrication 3 l oil tank, fill level monitoring Saw: Drive 5.5 kW, 400 V, 50 Hz Saw blade Ø 500 mm Saw feed pneumatic with hydraulic control, from below Pneumatic profile clamping device vertical and horizontal Cycle spray unit with one nozzle Flap after the saw for removal of cut-offs and residual pieces, max. length 200 mm Parts fall down into the provided container Longer residual pieces are disposed of together with good parts Dot Peen Marking System: Marking size 2 – 7 mm Marking window 80 x 20 mm, 15 characters incl. spaces Marking always approx. 190 mm after the saw cut Data transfer from an Excel file via interface Each profile can have a different designation

Tahun pembuatan: 2009, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Saya menjual: TRASMEC COC800DN Mobile Screw Loader/Conveyor dalam kondisi kerja yang baik. Diproduksi tahun 2009 oleh produsen peralatan konveyor ternama asal Italia, TRASMEC S.r.l. Cocok untuk penanganan serpihan kayu, serbuk gergaji, biomassa, serutan kayu, pelet, kompos, dan material curah lainnya. Guodpfx Agezcu Hvjrec Ideal untuk industri penggergajian, pabrik pelet, fasilitas biomassa, operasi daur ulang, dan perusahaan pengolahan kayu. Spesifikasi Pabrikan: TRASMEC S.r.l. (Italia) Model: COC800DN Tahun Produksi: 2009 Nomor Seri: AL0581C-C006603 Desain bergerak dengan roda Konstruksi baja heavy-duty Sistem konveyor sekrup industri Penggerak listrik Peralatan berstandar CE Eropa Kondisi Peralatan industri bekas pakai Konstruksi masih kokoh Aplikasi Serpihan kayu Serbuk gergaji Biomassa Serutan kayu Produksi pelet Kompos dan material organik Penanganan material curah

Tahun pembuatan: 2006, Kondisi: siap digunakan (bekas), Wood production line from 2006. This HUNDEGGER K2-4-450 has a maximum log length of 13 m at the infeed and 12 m at the outfeed. The machine is equipped with a fully automatic beam turning system as well as various cutting and drilling units for versatile applications. If you are looking for a high-quality joinery machine, you should consider the HUNDEGGER K2-4-450, which we are offering for sale. Contact us for further details. • Condition/Usage: Good condition; regularly maintained; used exclusively in our own operations; not used in multi-shift operation • Colour: RAL 5012 blue • Capacity: • Maximum log length at infeed: 13 m • Maximum log length at outfeed: 12 m • Integrated working units: • Under-table tilting cross-cut saw • 4-axis universal milling unit UF4 • Roller cutter • Finger joint cutter • Dovetail cutter • Combination support for vertical tools • Drilling unit 2.2 kW • Drilling unit 3.0 kW (reinforced) • Combination stand for horizontal tools • Additional drilling unit 2.2 kW • Slotting device • Marking unit Godpfxeza A Ddo Agrouc Additional equipment • Infeed transverse conveyor, 5 horizontal strands, 2.2 m, with flat belt chain • Infeed strand with shaft extension • Extension stand with feed mechanism • 6-arm outfeed table • Fully automatic pneumatic beam turning station • Refined timber support surfaces • Label printer

Tahun pembuatan: 2026, Kondisi: baru, DM flat belt conveyor type FB-700 without substructure for transporting bulk materials Conveyor belt length: 6,000 mm Belt width: 650 mm Welded construction made of structural steel, laser-cut and bent Base structure powder-coated in RAL 5015 Modular conveyor frame construction / sections available in transportable lengths. Frame can be extended or shortened at any time. Carrier roller construction in the return run, shaft Ø60/15mm Roller station pitch approx. 500mm (customizable) Closer roller pitch in the loading area Drive drum + tail drum made of S235 steel, welded and machined Ø220x700mm, crowned, shaft mounted in plummer block bearings. Drive: Hydromec 1.1 kW helical gear motor, belt speed 1.15 m/sec Connection: 400V, 50Hz, protection rating IP54 Drive pre-wired up to motor terminal box (Commissioning must be carried out by a qualified electrician) Motor mounted on the right, pulling configuration in direction of belt travel. Bearing points equipped with robust UCF flange bearings and lubrication points. Guedpoyhznhofx Agroc Rubber conveyor belt DM EP250/2 3+1.5 cover Chevron profile, 17mm high x 650mm wide Splice area without profile, endless hot vulcanized

Tahun pembuatan: 2025, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 20251122351, Complete solution for transporting bulk materials such as wood chips, wood pellets, shredded material, granulate, etc. Aluminium angle conveyor belt including mobile subframe Horizontal section: 1,200 mm Inclined section: 1,800 mm Angle at the bend: 40 degrees each Feed height (measured from floor): 500 mm Discharge height: 1,600 mm Belt width: 700 mm Extremely robust aluminium construction; heavy-duty design! PU conveyor belt incl. cleats and wave edge Drive: 0.55 kW motor (customizable), speed approx. 0.77 m/sec Connection: 220/240V, 50Hz, protection class IP54 Drive etc. ready for connection, motor control optional Gedpjyt Ia Djfx Agrsuc Wave edge: 80x50 mm T-60 cleats, short pitch 2-ply, particularly cross-stable Wave edges and cleats as well as belt seamlessly high-frequency welded At the angled section, the belt is guided on both sides with 4 hold-down rollers each. The belt is manufactured with a 100 mm edge-free zone on each side. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 400 mm; calculation as follows: (top view) transverse layout 100+50+400+50+100 mm Demo unit - Available immediately! - Can be inspected under power All prices are net plus 19% VAT All information without guarantee, only while stocks last!

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Complete solution for the transport of bulk materials such as shredded material, wood chips, wood pellets, granulate, etc. Aluminium angle conveyor belt incl. substructure Horizontal section: 2,500 mm (customizable) Inclined section: 5,000 mm (customizable) Bend angle: 35, 40, or 45° Infeed height: horizontal (customizable) Discharge height: individually adjustable Construction: height-adjustable (mobile) Conveyor belt width: 500 mm (customizable) We supply our conveyor belts in PVC, PU, felt, or rubber. PU conveyor belt incl. cleats and wave edge Drive: Motor 1.1 kW (customizable), speed approx. 0.3 m/sec Gedpfei Igdfox Agreuc Connection: 220/240V, 50Hz, protection rating IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Wave edge: 50x25 mm T-50 cleats - 400 mm pitch 2-ply, particularly laterally stable Fixed mounted overbelt magnet separator: Permanent overbelt magnet separator TYPE PM1200 Manufacturer: die magnetprofis GmbH & Co. KG L x W x H: 1,200 x 550 x 200 mm Magnetic L: 700 mm, W: 250 mm Gear motor: 0.37 kW We always have various such systems in stock. The delivery time for a customized system is currently about 2-3 weeks depending on production requirements. Our core competency is to supply the customer exactly what they truly require. We work together with our customers to develop tailor-made, individual solutions and deliver corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyor, magnetic separator, overbelt magnet separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overbelt magnet, magnetic belt separator

Tahun pembuatan: 2022, Kondisi: baru, Complete solution for the transport of bulk materials such as wood chips, wood pellets, shredder material, granulate, etc. Aluminum angled conveyor belt incl. subframe Horizontal section: 2,500 mm (adjustable) Inclined section: 4,000 mm (adjustable) Angle at the bend continuously and freely adjustable Feed height: horizontal (customizable) Discharge height individually adjustable Construction: height-adjustable (mobile) Conveyor belt width: 600 mm (adjustable) We supply our conveyor belts in PVC, PU, felt, or rubber. PU conveyor belt incl. cleats and wave edge Drive: 1.1 kW motor (adjustable), speed approx. 0.3 m/sec Connection 220/240V, 50Hz, protection class IP54 Drive and accessories ready for connection, motor control optional 8x adjustable machine feet for alignment Wave edge: 50 x 30 mm T-40 cleats - 300 mm pitch 2-ply, especially dimensionally stable across the belt Gjdpfxeilg U Ee Agrsuc We always have several such systems in stock. The delivery time for a customized system currently amounts to approximately 2–3 weeks, depending on manufacturing effort. Our core competence lies in providing customers exactly with the solution they truly need. We work together with our customers to develop custom, tailored solutions and deliver corresponding systems from our own production. Please feel free to contact us by phone as well, so we can find the right solution for your application. Conveyor, conveyor system, discharge belt, belt conveyor, magnetic separator, crossbelt magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator